[wxWidgets.git] / src / stc / scintilla / include / Scintilla.iface

## First line may be used for shbang

## This file defines the interface to Scintilla

## Copyright 2000-2003 by Neil Hodgson <neilh@scintilla.org>
## The License.txt file describes the conditions under which this software may be distributed.

## A line starting with ## is a pure comment and should be stripped by readers.
## A line starting with #! is for future shbang use
## A line starting with # followed by a space is a documentation comment and refers
## to the next feature definition.

## Each feature is defined by a line starting with fun, get, set, val or evt.
##     cat -> start a category
##     fun -> a function
##     get -> a property get function
##     set -> a property set function
##     val -> definition of a constant
##     evt -> an event
##     enu -> associate an enumeration with a set of vals with a prefix
##     lex -> associate a lexer with the lexical classes it produces
##
## All other feature names should be ignored. They may be defined in the future.
## A property may have a set function, a get function or both. Each will have
## "Get" or "Set" in their names and the corresponding name will have the obvious switch.
## A property may be subscripted, in which case the first parameter is the subscript.
## fun, get, and set features have a strict syntax:
## <featureType><ws><returnType><ws><name>[=<number](<param>,<param>)
## where <ws> stands for white space.
## param may be empty (null value) or is <paramType><ws><paramName>[=<value>]
## Additional white space is allowed between elements.
## The syntax for evt is <featureType><ws><returnType><ws><name>[=<number]([<param>[,<param>]*])
## Feature names that contain an underscore are defined by Windows, so in these
## cases, using the Windows definition is preferred where available.
## The feature numbers are stable so features will not be renumbered.
## Features may be removed but they will go through a period of deprecation
## before removal which is signalled by moving them into the Deprecated category.
##
## enu has the syntax enu<ws><enumeration>=<prefix>[<ws><prefix>]* where all the val
## features in this file starting with a given <prefix> are considered part of the
## enumeration.
##
## lex has the syntax lex<ws><name>=<lexerVal><ws><prefix>[<ws><prefix>]*
## where name is a reasonably capitalised (Python, XML) identifier or UI name,
## lexerVal is the val used to specify the lexer, and the list of prefixes is similar
## to enu. The name may not be the same as that used within the lexer so the lexerVal
## should be used to tie these entities together.

## Types:
##     void
##     int
##     bool -> integer, 1=true, 0=false
##     position -> integer position in a document
##     colour -> colour integer containing red, green and blue bytes.
##     string -> pointer to const character
##     stringresult -> pointer to character, NULL-> return size of result
##     cells -> pointer to array of cells, each cell containing a style byte and character byte
##     textrange -> range of a min and a max position with an output string
##     findtext -> searchrange, text -> foundposition
##     keymod -> integer containing key in low half and modifiers in high half
##     formatrange
## Types no longer used:
##     findtextex -> searchrange
##     charrange -> range of a min and a max position
##     charrangeresult -> like charrange, but output param
##     countedstring
##     point -> x,y
##     pointresult  -> like point, but output param
##     rectangle -> left,top,right,bottom
## Client code should ignore definitions containing types it does not understand, except
## for possibly #defining the constants

## Line numbers and positions start at 0.
## String arguments may contain NUL ('\0') characters where the calls provide a length
## argument and retrieve NUL characters. All retrieved strings except for those retrieved
## by GetLine also have a NUL appended but client code should calculate the size that
## will be returned rather than relying upon the NUL whenever possible. Allow for the
## extra NUL character when allocating buffers. The size to allocate for a stringresult
## can be determined by calling with a NULL (0) pointer.

cat Basics

################################################
## For Scintilla.h
val INVALID_POSITION=-1
# Define start of Scintilla messages to be greater than all Windows edit (EM_*) messages
# as many EM_ messages can be used although that use is deprecated.
val SCI_START=2000
val SCI_OPTIONAL_START=3000
val SCI_LEXER_START=4000

# Add text to the document at current position.
fun void AddText=2001(int length, string text)

# Add array of cells to document.
fun void AddStyledText=2002(int length, cells c)

# Insert string at a position.
fun void InsertText=2003(position pos, string text)

# Delete all text in the document.
fun void ClearAll=2004(,)

# Set all style bytes to 0, remove all folding information.
fun void ClearDocumentStyle=2005(,)

# Returns the number of bytes in the document.
get int GetLength=2006(,)

# Returns the character byte at the position.
get int GetCharAt=2007(position pos,)

# Returns the position of the caret.
get position GetCurrentPos=2008(,)

# Returns the position of the opposite end of the selection to the caret.
get position GetAnchor=2009(,)

# Returns the style byte at the position.
get int GetStyleAt=2010(position pos,)

# Redoes the next action on the undo history.
fun void Redo=2011(,)

# Choose between collecting actions into the undo
# history and discarding them.
set void SetUndoCollection=2012(bool collectUndo,)

# Select all the text in the document.
fun void SelectAll=2013(,)

# Remember the current position in the undo history as the position
# at which the document was saved.
fun void SetSavePoint=2014(,)

# Retrieve a buffer of cells.
# Returns the number of bytes in the buffer not including terminating NULs.
fun int GetStyledText=2015(, textrange tr)

# Are there any redoable actions in the undo history?
fun bool CanRedo=2016(,)

# Retrieve the line number at which a particular marker is located.
fun int MarkerLineFromHandle=2017(int handle,)

# Delete a marker.
fun void MarkerDeleteHandle=2018(int handle,)

# Is undo history being collected?
get bool GetUndoCollection=2019(,)

enu WhiteSpace=SCWS_
val SCWS_INVISIBLE=0
val SCWS_VISIBLEALWAYS=1
val SCWS_VISIBLEAFTERINDENT=2

# Are white space characters currently visible?
# Returns one of SCWS_* constants.
get int GetViewWS=2020(,)

# Make white space characters invisible, always visible or visible outside indentation.
set void SetViewWS=2021(int viewWS,)

# Find the position from a point within the window.
fun position PositionFromPoint=2022(int x, int y)

# Find the position from a point within the window but return
# INVALID_POSITION if not close to text.
fun position PositionFromPointClose=2023(int x, int y)

# Set caret to start of a line and ensure it is visible.
fun void GotoLine=2024(int line,)

# Set caret to a position and ensure it is visible.
fun void GotoPos=2025(position pos,)

# Set the selection anchor to a position. The anchor is the opposite
# end of the selection from the caret.
set void SetAnchor=2026(position posAnchor,)

# Retrieve the text of the line containing the caret.
# Returns the index of the caret on the line.
fun int GetCurLine=2027(int length, stringresult text)

# Retrieve the position of the last correctly styled character.
get position GetEndStyled=2028(,)

enu EndOfLine=SC_EOL_
val SC_EOL_CRLF=0
val SC_EOL_CR=1
val SC_EOL_LF=2

# Convert all line endings in the document to one mode.
fun void ConvertEOLs=2029(int eolMode,)

# Retrieve the current end of line mode - one of CRLF, CR, or LF.
get int GetEOLMode=2030(,)

# Set the current end of line mode.
set void SetEOLMode=2031(int eolMode,)

# Set the current styling position to pos and the styling mask to mask.
# The styling mask can be used to protect some bits in each styling byte from modification.
fun void StartStyling=2032(position pos, int mask)

# Change style from current styling position for length characters to a style
# and move the current styling position to after this newly styled segment.
fun void SetStyling=2033(int length, int style)

# Is drawing done first into a buffer or direct to the screen?
get bool GetBufferedDraw=2034(,)

# If drawing is buffered then each line of text is drawn into a bitmap buffer
# before drawing it to the screen to avoid flicker.
set void SetBufferedDraw=2035(bool buffered,)

# Change the visible size of a tab to be a multiple of the width of a space character.
set void SetTabWidth=2036(int tabWidth,)

# Retrieve the visible size of a tab.
get int GetTabWidth=2121(,)

# The SC_CP_UTF8 value can be used to enter Unicode mode.
# This is the same value as CP_UTF8 in Windows
val SC_CP_UTF8=65001

# The SC_CP_DBCS value can be used to indicate a DBCS mode for GTK+.
val SC_CP_DBCS=1

# Set the code page used to interpret the bytes of the document as characters.
# The SC_CP_UTF8 value can be used to enter Unicode mode.
set void SetCodePage=2037(int codePage,)

# In palette mode, Scintilla uses the environment's palette calls to display
# more colours. This may lead to ugly displays.
set void SetUsePalette=2039(bool usePalette,)

enu MarkerSymbol=SC_MARK_
val MARKER_MAX=31
val SC_MARK_CIRCLE=0
val SC_MARK_ROUNDRECT=1
val SC_MARK_ARROW=2
val SC_MARK_SMALLRECT=3
val SC_MARK_SHORTARROW=4
val SC_MARK_EMPTY=5
val SC_MARK_ARROWDOWN=6
val SC_MARK_MINUS=7
val SC_MARK_PLUS=8

# Shapes used for outlining column.
val SC_MARK_VLINE=9
val SC_MARK_LCORNER=10
val SC_MARK_TCORNER=11
val SC_MARK_BOXPLUS=12
val SC_MARK_BOXPLUSCONNECTED=13
val SC_MARK_BOXMINUS=14
val SC_MARK_BOXMINUSCONNECTED=15
val SC_MARK_LCORNERCURVE=16
val SC_MARK_TCORNERCURVE=17
val SC_MARK_CIRCLEPLUS=18
val SC_MARK_CIRCLEPLUSCONNECTED=19
val SC_MARK_CIRCLEMINUS=20
val SC_MARK_CIRCLEMINUSCONNECTED=21

# Invisible mark that only sets the line background color.
val SC_MARK_BACKGROUND=22
val SC_MARK_DOTDOTDOT=23
val SC_MARK_ARROWS=24
val SC_MARK_PIXMAP=25
val SC_MARK_FULLRECT=26
val SC_MARK_LEFTRECT=27
val SC_MARK_AVAILABLE=28
val SC_MARK_UNDERLINE=29

val SC_MARK_CHARACTER=10000

enu MarkerOutline=SC_MARKNUM_
# Markers used for outlining column.
val SC_MARKNUM_FOLDEREND=25
val SC_MARKNUM_FOLDEROPENMID=26
val SC_MARKNUM_FOLDERMIDTAIL=27
val SC_MARKNUM_FOLDERTAIL=28
val SC_MARKNUM_FOLDERSUB=29
val SC_MARKNUM_FOLDER=30
val SC_MARKNUM_FOLDEROPEN=31

val SC_MASK_FOLDERS=0xFE000000

# Set the symbol used for a particular marker number.
fun void MarkerDefine=2040(int markerNumber, int markerSymbol)

# Set the foreground colour used for a particular marker number.
fun void MarkerSetFore=2041(int markerNumber, colour fore)

# Set the background colour used for a particular marker number.
fun void MarkerSetBack=2042(int markerNumber, colour back)

# Add a marker to a line, returning an ID which can be used to find or delete the marker.
fun int MarkerAdd=2043(int line, int markerNumber)

# Delete a marker from a line.
fun void MarkerDelete=2044(int line, int markerNumber)

# Delete all markers with a particular number from all lines.
fun void MarkerDeleteAll=2045(int markerNumber,)

# Get a bit mask of all the markers set on a line.
fun int MarkerGet=2046(int line,)

# Find the next line after lineStart that includes a marker in mask.
fun int MarkerNext=2047(int lineStart, int markerMask)

# Find the previous line before lineStart that includes a marker in mask.
fun int MarkerPrevious=2048(int lineStart, int markerMask)

# Define a marker from a pixmap.
fun void MarkerDefinePixmap=2049(int markerNumber, string pixmap)

# Add a set of markers to a line.
fun void MarkerAddSet=2466(int line, int set)

# Set the alpha used for a marker that is drawn in the text area, not the margin.
fun void MarkerSetAlpha=2476(int markerNumber, int alpha)

enu MarginType=SC_MARGIN_
val SC_MARGIN_SYMBOL=0
val SC_MARGIN_NUMBER=1
val SC_MARGIN_BACK=2
val SC_MARGIN_FORE=3
val SC_MARGIN_TEXT=4
val SC_MARGIN_RTEXT=5

# Set a margin to be either numeric or symbolic.
set void SetMarginTypeN=2240(int margin, int marginType)

# Retrieve the type of a margin.
get int GetMarginTypeN=2241(int margin,)

# Set the width of a margin to a width expressed in pixels.
set void SetMarginWidthN=2242(int margin, int pixelWidth)

# Retrieve the width of a margin in pixels.
get int GetMarginWidthN=2243(int margin,)

# Set a mask that determines which markers are displayed in a margin.
set void SetMarginMaskN=2244(int margin, int mask)

# Retrieve the marker mask of a margin.
get int GetMarginMaskN=2245(int margin,)

# Make a margin sensitive or insensitive to mouse clicks.
set void SetMarginSensitiveN=2246(int margin, bool sensitive)

# Retrieve the mouse click sensitivity of a margin.
get bool GetMarginSensitiveN=2247(int margin,)

# Styles in range 32..38 are predefined for parts of the UI and are not used as normal styles.
# Style 39 is for future use.
enu StylesCommon=STYLE_
val STYLE_DEFAULT=32
val STYLE_LINENUMBER=33
val STYLE_BRACELIGHT=34
val STYLE_BRACEBAD=35
val STYLE_CONTROLCHAR=36
val STYLE_INDENTGUIDE=37
val STYLE_CALLTIP=38
val STYLE_LASTPREDEFINED=39
val STYLE_MAX=255

# Character set identifiers are used in StyleSetCharacterSet.
# The values are the same as the Windows *_CHARSET values.
enu CharacterSet=SC_CHARSET_
val SC_CHARSET_ANSI=0
val SC_CHARSET_DEFAULT=1
val SC_CHARSET_BALTIC=186
val SC_CHARSET_CHINESEBIG5=136
val SC_CHARSET_EASTEUROPE=238
val SC_CHARSET_GB2312=134
val SC_CHARSET_GREEK=161
val SC_CHARSET_HANGUL=129
val SC_CHARSET_MAC=77
val SC_CHARSET_OEM=255
val SC_CHARSET_RUSSIAN=204
val SC_CHARSET_CYRILLIC=1251
val SC_CHARSET_SHIFTJIS=128
val SC_CHARSET_SYMBOL=2
val SC_CHARSET_TURKISH=162
val SC_CHARSET_JOHAB=130
val SC_CHARSET_HEBREW=177
val SC_CHARSET_ARABIC=178
val SC_CHARSET_VIETNAMESE=163
val SC_CHARSET_THAI=222
val SC_CHARSET_8859_15=1000

# Clear all the styles and make equivalent to the global default style.
set void StyleClearAll=2050(,)

# Set the foreground colour of a style.
set void StyleSetFore=2051(int style, colour fore)

# Set the background colour of a style.
set void StyleSetBack=2052(int style, colour back)

# Set a style to be bold or not.
set void StyleSetBold=2053(int style, bool bold)

# Set a style to be italic or not.
set void StyleSetItalic=2054(int style, bool italic)

# Set the size of characters of a style.
set void StyleSetSize=2055(int style, int sizePoints)

# Set the font of a style.
set void StyleSetFont=2056(int style, string fontName)

# Set a style to have its end of line filled or not.
set void StyleSetEOLFilled=2057(int style, bool filled)

# Reset the default style to its state at startup
fun void StyleResetDefault=2058(,)

# Set a style to be underlined or not.
set void StyleSetUnderline=2059(int style, bool underline)

enu CaseVisible=SC_CASE_
val SC_CASE_MIXED=0
val SC_CASE_UPPER=1
val SC_CASE_LOWER=2

# Get the foreground colour of a style.
get colour StyleGetFore=2481(int style,)

# Get the background colour of a style.
get colour StyleGetBack=2482(int style,)

# Get is a style bold or not.
get bool StyleGetBold=2483(int style,)

# Get is a style italic or not.
get bool StyleGetItalic=2484(int style,)

# Get the size of characters of a style.
get int StyleGetSize=2485(int style,)

# Get the font of a style.
# Returns the length of the fontName
fun int StyleGetFont=2486(int style, stringresult fontName)

# Get is a style to have its end of line filled or not.
get bool StyleGetEOLFilled=2487(int style,)

# Get is a style underlined or not.
get bool StyleGetUnderline=2488(int style,)

# Get is a style mixed case, or to force upper or lower case.
get int StyleGetCase=2489(int style,)

# Get the character set of the font in a style.
get int StyleGetCharacterSet=2490(int style,)

# Get is a style visible or not.
get bool StyleGetVisible=2491(int style,)

# Get is a style changeable or not (read only).
# Experimental feature, currently buggy.
get bool StyleGetChangeable=2492(int style,)

# Get is a style a hotspot or not.
get bool StyleGetHotSpot=2493(int style,)

# Set a style to be mixed case, or to force upper or lower case.
set void StyleSetCase=2060(int style, int caseForce)

# Set the character set of the font in a style.
set void StyleSetCharacterSet=2066(int style, int characterSet)

# Set a style to be a hotspot or not.
set void StyleSetHotSpot=2409(int style, bool hotspot)

# Set the foreground colour of the main and additional selections and whether to use this setting.
fun void SetSelFore=2067(bool useSetting, colour fore)

# Set the background colour of the main and additional selections and whether to use this setting.
fun void SetSelBack=2068(bool useSetting, colour back)

# Get the alpha of the selection.
get int GetSelAlpha=2477(,)

# Set the alpha of the selection.
set void SetSelAlpha=2478(int alpha,)

# Is the selection end of line filled?
get bool GetSelEOLFilled=2479(,)

# Set the selection to have its end of line filled or not.
set void SetSelEOLFilled=2480(bool filled,)

# Set the foreground colour of the caret.
set void SetCaretFore=2069(colour fore,)

# When key+modifier combination km is pressed perform msg.
fun void AssignCmdKey=2070(keymod km, int msg)

# When key+modifier combination km is pressed do nothing.
fun void ClearCmdKey=2071(keymod km,)

# Drop all key mappings.
fun void ClearAllCmdKeys=2072(,)

# Set the styles for a segment of the document.
fun void SetStylingEx=2073(int length, string styles)

# Set a style to be visible or not.
set void StyleSetVisible=2074(int style, bool visible)

# Get the time in milliseconds that the caret is on and off.
get int GetCaretPeriod=2075(,)

# Get the time in milliseconds that the caret is on and off. 0 = steady on.
set void SetCaretPeriod=2076(int periodMilliseconds,)

# Set the set of characters making up words for when moving or selecting by word.
# First sets defaults like SetCharsDefault.
set void SetWordChars=2077(, string characters)

# Start a sequence of actions that is undone and redone as a unit.
# May be nested.
fun void BeginUndoAction=2078(,)

# End a sequence of actions that is undone and redone as a unit.
fun void EndUndoAction=2079(,)

# Indicator style enumeration and some constants
enu IndicatorStyle=INDIC_
val INDIC_PLAIN=0
val INDIC_SQUIGGLE=1
val INDIC_TT=2
val INDIC_DIAGONAL=3
val INDIC_STRIKE=4
val INDIC_HIDDEN=5
val INDIC_BOX=6
val INDIC_ROUNDBOX=7
val INDIC_MAX=31
val INDIC_CONTAINER=8
val INDIC0_MASK=0x20
val INDIC1_MASK=0x40
val INDIC2_MASK=0x80
val INDICS_MASK=0xE0

# Set an indicator to plain, squiggle or TT.
set void IndicSetStyle=2080(int indic, int style)

# Retrieve the style of an indicator.
get int IndicGetStyle=2081(int indic,)

# Set the foreground colour of an indicator.
set void IndicSetFore=2082(int indic, colour fore)

# Retrieve the foreground colour of an indicator.
get colour IndicGetFore=2083(int indic,)

# Set an indicator to draw under text or over(default).
set void IndicSetUnder=2510(int indic, bool under)

# Retrieve whether indicator drawn under or over text.
get bool IndicGetUnder=2511(int indic,)

# Set the foreground colour of all whitespace and whether to use this setting.
fun void SetWhitespaceFore=2084(bool useSetting, colour fore)

# Set the background colour of all whitespace and whether to use this setting.
fun void SetWhitespaceBack=2085(bool useSetting, colour back)

# Set the size of the dots used to mark space characters.
set void SetWhitespaceSize=2086(int size,)

# Get the size of the dots used to mark space characters.
get int GetWhitespaceSize=2087(,)

# Divide each styling byte into lexical class bits (default: 5) and indicator
# bits (default: 3). If a lexer requires more than 32 lexical states, then this
# is used to expand the possible states.
set void SetStyleBits=2090(int bits,)

# Retrieve number of bits in style bytes used to hold the lexical state.
get int GetStyleBits=2091(,)

# Used to hold extra styling information for each line.
set void SetLineState=2092(int line, int state)

# Retrieve the extra styling information for a line.
get int GetLineState=2093(int line,)

# Retrieve the last line number that has line state.
get int GetMaxLineState=2094(,)

# Is the background of the line containing the caret in a different colour?
get bool GetCaretLineVisible=2095(,)

# Display the background of the line containing the caret in a different colour.
set void SetCaretLineVisible=2096(bool show,)

# Get the colour of the background of the line containing the caret.
get colour GetCaretLineBack=2097(,)

# Set the colour of the background of the line containing the caret.
set void SetCaretLineBack=2098(colour back,)

# Set a style to be changeable or not (read only).
# Experimental feature, currently buggy.
set void StyleSetChangeable=2099(int style, bool changeable)

# Display a auto-completion list.
# The lenEntered parameter indicates how many characters before
# the caret should be used to provide context.
fun void AutoCShow=2100(int lenEntered, string itemList)

# Remove the auto-completion list from the screen.
fun void AutoCCancel=2101(,)

# Is there an auto-completion list visible?
fun bool AutoCActive=2102(,)

# Retrieve the position of the caret when the auto-completion list was displayed.
fun position AutoCPosStart=2103(,)

# User has selected an item so remove the list and insert the selection.
fun void AutoCComplete=2104(,)

# Define a set of character that when typed cancel the auto-completion list.
fun void AutoCStops=2105(, string characterSet)

# Change the separator character in the string setting up an auto-completion list.
# Default is space but can be changed if items contain space.
set void AutoCSetSeparator=2106(int separatorCharacter,)

# Retrieve the auto-completion list separator character.
get int AutoCGetSeparator=2107(,)

# Select the item in the auto-completion list that starts with a string.
fun void AutoCSelect=2108(, string text)

# Should the auto-completion list be cancelled if the user backspaces to a
# position before where the box was created.
set void AutoCSetCancelAtStart=2110(bool cancel,)

# Retrieve whether auto-completion cancelled by backspacing before start.
get bool AutoCGetCancelAtStart=2111(,)

# Define a set of characters that when typed will cause the autocompletion to
# choose the selected item.
set void AutoCSetFillUps=2112(, string characterSet)

# Should a single item auto-completion list automatically choose the item.
set void AutoCSetChooseSingle=2113(bool chooseSingle,)

# Retrieve whether a single item auto-completion list automatically choose the item.
get bool AutoCGetChooseSingle=2114(,)

# Set whether case is significant when performing auto-completion searches.
set void AutoCSetIgnoreCase=2115(bool ignoreCase,)

# Retrieve state of ignore case flag.
get bool AutoCGetIgnoreCase=2116(,)

# Display a list of strings and send notification when user chooses one.
fun void UserListShow=2117(int listType, string itemList)

# Set whether or not autocompletion is hidden automatically when nothing matches.
set void AutoCSetAutoHide=2118(bool autoHide,)

# Retrieve whether or not autocompletion is hidden automatically when nothing matches.
get bool AutoCGetAutoHide=2119(,)

# Set whether or not autocompletion deletes any word characters
# after the inserted text upon completion.
set void AutoCSetDropRestOfWord=2270(bool dropRestOfWord,)

# Retrieve whether or not autocompletion deletes any word characters
# after the inserted text upon completion.
get bool AutoCGetDropRestOfWord=2271(,)

# Register an XPM image for use in autocompletion lists.
fun void RegisterImage=2405(int type, string xpmData)

# Clear all the registered XPM images.
fun void ClearRegisteredImages=2408(,)

# Retrieve the auto-completion list type-separator character.
get int AutoCGetTypeSeparator=2285(,)

# Change the type-separator character in the string setting up an auto-completion list.
# Default is '?' but can be changed if items contain '?'.
set void AutoCSetTypeSeparator=2286(int separatorCharacter,)

# Set the maximum width, in characters, of auto-completion and user lists.
# Set to 0 to autosize to fit longest item, which is the default.
set void AutoCSetMaxWidth=2208(int characterCount,)

# Get the maximum width, in characters, of auto-completion and user lists.
get int AutoCGetMaxWidth=2209(,)

# Set the maximum height, in rows, of auto-completion and user lists.
# The default is 5 rows.
set void AutoCSetMaxHeight=2210(int rowCount,)

# Set the maximum height, in rows, of auto-completion and user lists.
get int AutoCGetMaxHeight=2211(,)

# Set the number of spaces used for one level of indentation.
set void SetIndent=2122(int indentSize,)

# Retrieve indentation size.
get int GetIndent=2123(,)

# Indentation will only use space characters if useTabs is false, otherwise
# it will use a combination of tabs and spaces.
set void SetUseTabs=2124(bool useTabs,)

# Retrieve whether tabs will be used in indentation.
get bool GetUseTabs=2125(,)

# Change the indentation of a line to a number of columns.
set void SetLineIndentation=2126(int line, int indentSize)

# Retrieve the number of columns that a line is indented.
get int GetLineIndentation=2127(int line,)

# Retrieve the position before the first non indentation character on a line.
get position GetLineIndentPosition=2128(int line,)

# Retrieve the column number of a position, taking tab width into account.
get int GetColumn=2129(position pos,)

# Show or hide the horizontal scroll bar.
set void SetHScrollBar=2130(bool show,)

# Is the horizontal scroll bar visible?
get bool GetHScrollBar=2131(,)

enu IndentView=SC_IV_
val SC_IV_NONE=0
val SC_IV_REAL=1
val SC_IV_LOOKFORWARD=2
val SC_IV_LOOKBOTH=3

# Show or hide indentation guides.
set void SetIndentationGuides=2132(int indentView,)

# Are the indentation guides visible?
get int GetIndentationGuides=2133(,)

# Set the highlighted indentation guide column.
# 0 = no highlighted guide.
set void SetHighlightGuide=2134(int column,)

# Get the highlighted indentation guide column.
get int GetHighlightGuide=2135(,)

# Get the position after the last visible characters on a line.
get int GetLineEndPosition=2136(int line,)

# Get the code page used to interpret the bytes of the document as characters.
get int GetCodePage=2137(,)

# Get the foreground colour of the caret.
get colour GetCaretFore=2138(,)

# In palette mode?
get bool GetUsePalette=2139(,)

# In read-only mode?
get bool GetReadOnly=2140(,)

# Sets the position of the caret.
set void SetCurrentPos=2141(position pos,)

# Sets the position that starts the selection - this becomes the anchor.
set void SetSelectionStart=2142(position pos,)

# Returns the position at the start of the selection.
get position GetSelectionStart=2143(,)

# Sets the position that ends the selection - this becomes the currentPosition.
set void SetSelectionEnd=2144(position pos,)

# Returns the position at the end of the selection.
get position GetSelectionEnd=2145(,)

# Sets the print magnification added to the point size of each style for printing.
set void SetPrintMagnification=2146(int magnification,)

# Returns the print magnification.
get int GetPrintMagnification=2147(,)

enu PrintOption=SC_PRINT_
# PrintColourMode - use same colours as screen.
val SC_PRINT_NORMAL=0
# PrintColourMode - invert the light value of each style for printing.
val SC_PRINT_INVERTLIGHT=1
# PrintColourMode - force black text on white background for printing.
val SC_PRINT_BLACKONWHITE=2
# PrintColourMode - text stays coloured, but all background is forced to be white for printing.
val SC_PRINT_COLOURONWHITE=3
# PrintColourMode - only the default-background is forced to be white for printing.
val SC_PRINT_COLOURONWHITEDEFAULTBG=4

# Modify colours when printing for clearer printed text.
set void SetPrintColourMode=2148(int mode,)

# Returns the print colour mode.
get int GetPrintColourMode=2149(,)

enu FindOption=SCFIND_
val SCFIND_WHOLEWORD=2
val SCFIND_MATCHCASE=4
val SCFIND_WORDSTART=0x00100000
val SCFIND_REGEXP=0x00200000
val SCFIND_POSIX=0x00400000

# Find some text in the document.
fun position FindText=2150(int flags, findtext ft)

# On Windows, will draw the document into a display context such as a printer.
fun position FormatRange=2151(bool draw, formatrange fr)

# Retrieve the display line at the top of the display.
get int GetFirstVisibleLine=2152(,)

# Retrieve the contents of a line.
# Returns the length of the line.
fun int GetLine=2153(int line, stringresult text)

# Returns the number of lines in the document. There is always at least one.
get int GetLineCount=2154(,)

# Sets the size in pixels of the left margin.
set void SetMarginLeft=2155(, int pixelWidth)

# Returns the size in pixels of the left margin.
get int GetMarginLeft=2156(,)

# Sets the size in pixels of the right margin.
set void SetMarginRight=2157(, int pixelWidth)

# Returns the size in pixels of the right margin.
get int GetMarginRight=2158(,)

# Is the document different from when it was last saved?
get bool GetModify=2159(,)

# Select a range of text.
fun void SetSel=2160(position start, position end)

# Retrieve the selected text.
# Return the length of the text.
fun int GetSelText=2161(, stringresult text)

# Retrieve a range of text.
# Return the length of the text.
fun int GetTextRange=2162(, textrange tr)

# Draw the selection in normal style or with selection highlighted.
fun void HideSelection=2163(bool normal,)

# Retrieve the x value of the point in the window where a position is displayed.
fun int PointXFromPosition=2164(, position pos)

# Retrieve the y value of the point in the window where a position is displayed.
fun int PointYFromPosition=2165(, position pos)

# Retrieve the line containing a position.
fun int LineFromPosition=2166(position pos,)

# Retrieve the position at the start of a line.
fun position PositionFromLine=2167(int line,)

# Scroll horizontally and vertically.
fun void LineScroll=2168(int columns, int lines)

# Ensure the caret is visible.
fun void ScrollCaret=2169(,)

# Replace the selected text with the argument text.
fun void ReplaceSel=2170(, string text)

# Set to read only or read write.
set void SetReadOnly=2171(bool readOnly,)

# Null operation.
fun void Null=2172(,)

# Will a paste succeed?
fun bool CanPaste=2173(,)

# Are there any undoable actions in the undo history?
fun bool CanUndo=2174(,)

# Delete the undo history.
fun void EmptyUndoBuffer=2175(,)

# Undo one action in the undo history.
fun void Undo=2176(,)

# Cut the selection to the clipboard.
fun void Cut=2177(,)

# Copy the selection to the clipboard.
fun void Copy=2178(,)

# Paste the contents of the clipboard into the document replacing the selection.
fun void Paste=2179(,)

# Clear the selection.
fun void Clear=2180(,)

# Replace the contents of the document with the argument text.
fun void SetText=2181(, string text)

# Retrieve all the text in the document.
# Returns number of characters retrieved.
fun int GetText=2182(int length, stringresult text)

# Retrieve the number of characters in the document.
get int GetTextLength=2183(,)

# Retrieve a pointer to a function that processes messages for this Scintilla.
get int GetDirectFunction=2184(,)

# Retrieve a pointer value to use as the first argument when calling
# the function returned by GetDirectFunction.
get int GetDirectPointer=2185(,)

# Set to overtype (true) or insert mode.
set void SetOvertype=2186(bool overtype,)

# Returns true if overtype mode is active otherwise false is returned.
get bool GetOvertype=2187(,)

# Set the width of the insert mode caret.
set void SetCaretWidth=2188(int pixelWidth,)

# Returns the width of the insert mode caret.
get int GetCaretWidth=2189(,)

# Sets the position that starts the target which is used for updating the
# document without affecting the scroll position.
set void SetTargetStart=2190(position pos,)

# Get the position that starts the target.
get position GetTargetStart=2191(,)

# Sets the position that ends the target which is used for updating the
# document without affecting the scroll position.
set void SetTargetEnd=2192(position pos,)

# Get the position that ends the target.
get position GetTargetEnd=2193(,)

# Replace the target text with the argument text.
# Text is counted so it can contain NULs.
# Returns the length of the replacement text.
fun int ReplaceTarget=2194(int length, string text)

# Replace the target text with the argument text after \d processing.
# Text is counted so it can contain NULs.
# Looks for \d where d is between 1 and 9 and replaces these with the strings
# matched in the last search operation which were surrounded by \( and \).
# Returns the length of the replacement text including any change
# caused by processing the \d patterns.
fun int ReplaceTargetRE=2195(int length, string text)

# Search for a counted string in the target and set the target to the found
# range. Text is counted so it can contain NULs.
# Returns length of range or -1 for failure in which case target is not moved.
fun int SearchInTarget=2197(int length, string text)

# Set the search flags used by SearchInTarget.
set void SetSearchFlags=2198(int flags,)

# Get the search flags used by SearchInTarget.
get int GetSearchFlags=2199(,)

# Show a call tip containing a definition near position pos.
fun void CallTipShow=2200(position pos, string definition)

# Remove the call tip from the screen.
fun void CallTipCancel=2201(,)

# Is there an active call tip?
fun bool CallTipActive=2202(,)

# Retrieve the position where the caret was before displaying the call tip.
fun position CallTipPosStart=2203(,)

# Highlight a segment of the definition.
fun void CallTipSetHlt=2204(int start, int end)

# Set the background colour for the call tip.
set void CallTipSetBack=2205(colour back,)

# Set the foreground colour for the call tip.
set void CallTipSetFore=2206(colour fore,)

# Set the foreground colour for the highlighted part of the call tip.
set void CallTipSetForeHlt=2207(colour fore,)

# Enable use of STYLE_CALLTIP and set call tip tab size in pixels.
set void CallTipUseStyle=2212(int tabSize,)

# Find the display line of a document line taking hidden lines into account.
fun int VisibleFromDocLine=2220(int line,)

# Find the document line of a display line taking hidden lines into account.
fun int DocLineFromVisible=2221(int lineDisplay,)

# The number of display lines needed to wrap a document line
fun int WrapCount=2235(int line,)

enu FoldLevel=SC_FOLDLEVEL
val SC_FOLDLEVELBASE=0x400
val SC_FOLDLEVELWHITEFLAG=0x1000
val SC_FOLDLEVELHEADERFLAG=0x2000
val SC_FOLDLEVELNUMBERMASK=0x0FFF

# Set the fold level of a line.
# This encodes an integer level along with flags indicating whether the
# line is a header and whether it is effectively white space.
set void SetFoldLevel=2222(int line, int level)

# Retrieve the fold level of a line.
get int GetFoldLevel=2223(int line,)

# Find the last child line of a header line.
get int GetLastChild=2224(int line, int level)

# Find the parent line of a child line.
get int GetFoldParent=2225(int line,)

# Make a range of lines visible.
fun void ShowLines=2226(int lineStart, int lineEnd)

# Make a range of lines invisible.
fun void HideLines=2227(int lineStart, int lineEnd)

# Is a line visible?
get bool GetLineVisible=2228(int line,)

# Show the children of a header line.
set void SetFoldExpanded=2229(int line, bool expanded)

# Is a header line expanded?
get bool GetFoldExpanded=2230(int line,)

# Switch a header line between expanded and contracted.
fun void ToggleFold=2231(int line,)

# Ensure a particular line is visible by expanding any header line hiding it.
fun void EnsureVisible=2232(int line,)

enu FoldFlag=SC_FOLDFLAG_
val SC_FOLDFLAG_LINEBEFORE_EXPANDED=0x0002
val SC_FOLDFLAG_LINEBEFORE_CONTRACTED=0x0004
val SC_FOLDFLAG_LINEAFTER_EXPANDED=0x0008
val SC_FOLDFLAG_LINEAFTER_CONTRACTED=0x0010
val SC_FOLDFLAG_LEVELNUMBERS=0x0040

# Set some style options for folding.
fun void SetFoldFlags=2233(int flags,)

# Ensure a particular line is visible by expanding any header line hiding it.
# Use the currently set visibility policy to determine which range to display.
fun void EnsureVisibleEnforcePolicy=2234(int line,)

# Sets whether a tab pressed when caret is within indentation indents.
set void SetTabIndents=2260(bool tabIndents,)

# Does a tab pressed when caret is within indentation indent?
get bool GetTabIndents=2261(,)

# Sets whether a backspace pressed when caret is within indentation unindents.
set void SetBackSpaceUnIndents=2262(bool bsUnIndents,)

# Does a backspace pressed when caret is within indentation unindent?
get bool GetBackSpaceUnIndents=2263(,)

val SC_TIME_FOREVER=10000000

# Sets the time the mouse must sit still to generate a mouse dwell event.
set void SetMouseDwellTime=2264(int periodMilliseconds,)

# Retrieve the time the mouse must sit still to generate a mouse dwell event.
get int GetMouseDwellTime=2265(,)

# Get position of start of word.
fun int WordStartPosition=2266(position pos, bool onlyWordCharacters)

# Get position of end of word.
fun int WordEndPosition=2267(position pos, bool onlyWordCharacters)

enu Wrap=SC_WRAP_
val SC_WRAP_NONE=0
val SC_WRAP_WORD=1
val SC_WRAP_CHAR=2

# Sets whether text is word wrapped.
set void SetWrapMode=2268(int mode,)

# Retrieve whether text is word wrapped.
get int GetWrapMode=2269(,)

enu WrapVisualFlag=SC_WRAPVISUALFLAG_
val SC_WRAPVISUALFLAG_NONE=0x0000
val SC_WRAPVISUALFLAG_END=0x0001
val SC_WRAPVISUALFLAG_START=0x0002

# Set the display mode of visual flags for wrapped lines.
set void SetWrapVisualFlags=2460(int wrapVisualFlags,)

# Retrive the display mode of visual flags for wrapped lines.
get int GetWrapVisualFlags=2461(,)

enu WrapVisualLocation=SC_WRAPVISUALFLAGLOC_
val SC_WRAPVISUALFLAGLOC_DEFAULT=0x0000
val SC_WRAPVISUALFLAGLOC_END_BY_TEXT=0x0001
val SC_WRAPVISUALFLAGLOC_START_BY_TEXT=0x0002

# Set the location of visual flags for wrapped lines.
set void SetWrapVisualFlagsLocation=2462(int wrapVisualFlagsLocation,)

# Retrive the location of visual flags for wrapped lines.
get int GetWrapVisualFlagsLocation=2463(,)

# Set the start indent for wrapped lines.
set void SetWrapStartIndent=2464(int indent,)

# Retrive the start indent for wrapped lines.
get int GetWrapStartIndent=2465(,)

enu WrapIndentMode=SC_WRAPINDENT_
val SC_WRAPINDENT_FIXED=0
val SC_WRAPINDENT_SAME=1
val SC_WRAPINDENT_INDENT=2

# Sets how wrapped sublines are placed. Default is fixed.
set void SetWrapIndentMode=2472(int mode,)

# Retrieve how wrapped sublines are placed. Default is fixed.
get int GetWrapIndentMode=2473(,)

enu LineCache=SC_CACHE_
val SC_CACHE_NONE=0
val SC_CACHE_CARET=1
val SC_CACHE_PAGE=2
val SC_CACHE_DOCUMENT=3

# Sets the degree of caching of layout information.
set void SetLayoutCache=2272(int mode,)

# Retrieve the degree of caching of layout information.
get int GetLayoutCache=2273(,)

# Sets the document width assumed for scrolling.
set void SetScrollWidth=2274(int pixelWidth,)

# Retrieve the document width assumed for scrolling.
get int GetScrollWidth=2275(,)

# Sets whether the maximum width line displayed is used to set scroll width.
set void SetScrollWidthTracking=2516(bool tracking,)

# Retrieve whether the scroll width tracks wide lines.
get bool GetScrollWidthTracking=2517(,)

# Measure the pixel width of some text in a particular style.
# NUL terminated text argument.
# Does not handle tab or control characters.
fun int TextWidth=2276(int style, string text)

# Sets the scroll range so that maximum scroll position has
# the last line at the bottom of the view (default).
# Setting this to false allows scrolling one page below the last line.
set void SetEndAtLastLine=2277(bool endAtLastLine,)

# Retrieve whether the maximum scroll position has the last
# line at the bottom of the view.
get bool GetEndAtLastLine=2278(,)

# Retrieve the height of a particular line of text in pixels.
fun int TextHeight=2279(int line,)

# Show or hide the vertical scroll bar.
set void SetVScrollBar=2280(bool show,)

# Is the vertical scroll bar visible?
get bool GetVScrollBar=2281(,)

# Append a string to the end of the document without changing the selection.
fun void AppendText=2282(int length, string text)

# Is drawing done in two phases with backgrounds drawn before foregrounds?
get bool GetTwoPhaseDraw=2283(,)

# In twoPhaseDraw mode, drawing is performed in two phases, first the background
# and then the foreground. This avoids chopping off characters that overlap the next run.
set void SetTwoPhaseDraw=2284(bool twoPhase,)

# Control font anti-aliasing.

enu FontQuality=SC_EFF_
val SC_EFF_QUALITY_MASK=0xF
val SC_EFF_QUALITY_DEFAULT=0
val SC_EFF_QUALITY_NON_ANTIALIASED=1
val SC_EFF_QUALITY_ANTIALIASED=2
val SC_EFF_QUALITY_LCD_OPTIMIZED=3

# Choose the quality level for text from the FontQuality enumeration.
set void SetFontQuality=2611(int fontQuality,)

# Retrieve the quality level for text.
get int GetFontQuality=2612(,)

# Scroll so that a display line is at the top of the display.
set void SetFirstVisibleLine=2613(int lineDisplay,)

# Make the target range start and end be the same as the selection range start and end.
fun void TargetFromSelection=2287(,)

# Join the lines in the target.
fun void LinesJoin=2288(,)

# Split the lines in the target into lines that are less wide than pixelWidth
# where possible.
fun void LinesSplit=2289(int pixelWidth,)

# Set the colours used as a chequerboard pattern in the fold margin
fun void SetFoldMarginColour=2290(bool useSetting, colour back)
fun void SetFoldMarginHiColour=2291(bool useSetting, colour fore)

## New messages go here

## Start of key messages
# Move caret down one line.
fun void LineDown=2300(,)

# Move caret down one line extending selection to new caret position.
fun void LineDownExtend=2301(,)

# Move caret up one line.
fun void LineUp=2302(,)

# Move caret up one line extending selection to new caret position.
fun void LineUpExtend=2303(,)

# Move caret left one character.
fun void CharLeft=2304(,)

# Move caret left one character extending selection to new caret position.
fun void CharLeftExtend=2305(,)

# Move caret right one character.
fun void CharRight=2306(,)

# Move caret right one character extending selection to new caret position.
fun void CharRightExtend=2307(,)

# Move caret left one word.
fun void WordLeft=2308(,)

# Move caret left one word extending selection to new caret position.
fun void WordLeftExtend=2309(,)

# Move caret right one word.
fun void WordRight=2310(,)

# Move caret right one word extending selection to new caret position.
fun void WordRightExtend=2311(,)

# Move caret to first position on line.
fun void Home=2312(,)

# Move caret to first position on line extending selection to new caret position.
fun void HomeExtend=2313(,)

# Move caret to last position on line.
fun void LineEnd=2314(,)

# Move caret to last position on line extending selection to new caret position.
fun void LineEndExtend=2315(,)

# Move caret to first position in document.
fun void DocumentStart=2316(,)

# Move caret to first position in document extending selection to new caret position.
fun void DocumentStartExtend=2317(,)

# Move caret to last position in document.
fun void DocumentEnd=2318(,)

# Move caret to last position in document extending selection to new caret position.
fun void DocumentEndExtend=2319(,)

# Move caret one page up.
fun void PageUp=2320(,)

# Move caret one page up extending selection to new caret position.
fun void PageUpExtend=2321(,)

# Move caret one page down.
fun void PageDown=2322(,)

# Move caret one page down extending selection to new caret position.
fun void PageDownExtend=2323(,)

# Switch from insert to overtype mode or the reverse.
fun void EditToggleOvertype=2324(,)

# Cancel any modes such as call tip or auto-completion list display.
fun void Cancel=2325(,)

# Delete the selection or if no selection, the character before the caret.
fun void DeleteBack=2326(,)

# If selection is empty or all on one line replace the selection with a tab character.
# If more than one line selected, indent the lines.
fun void Tab=2327(,)

# Dedent the selected lines.
fun void BackTab=2328(,)

# Insert a new line, may use a CRLF, CR or LF depending on EOL mode.
fun void NewLine=2329(,)

# Insert a Form Feed character.
fun void FormFeed=2330(,)

# Move caret to before first visible character on line.
# If already there move to first character on line.
fun void VCHome=2331(,)

# Like VCHome but extending selection to new caret position.
fun void VCHomeExtend=2332(,)

# Magnify the displayed text by increasing the sizes by 1 point.
fun void ZoomIn=2333(,)

# Make the displayed text smaller by decreasing the sizes by 1 point.
fun void ZoomOut=2334(,)

# Delete the word to the left of the caret.
fun void DelWordLeft=2335(,)

# Delete the word to the right of the caret.
fun void DelWordRight=2336(,)

# Delete the word to the right of the caret, but not the trailing non-word characters.
fun void DelWordRightEnd=2518(,)

# Cut the line containing the caret.
fun void LineCut=2337(,)

# Delete the line containing the caret.
fun void LineDelete=2338(,)

# Switch the current line with the previous.
fun void LineTranspose=2339(,)

# Duplicate the current line.
fun void LineDuplicate=2404(,)

# Transform the selection to lower case.
fun void LowerCase=2340(,)

# Transform the selection to upper case.
fun void UpperCase=2341(,)

# Scroll the document down, keeping the caret visible.
fun void LineScrollDown=2342(,)

# Scroll the document up, keeping the caret visible.
fun void LineScrollUp=2343(,)

# Delete the selection or if no selection, the character before the caret.
# Will not delete the character before at the start of a line.
fun void DeleteBackNotLine=2344(,)

# Move caret to first position on display line.
fun void HomeDisplay=2345(,)

# Move caret to first position on display line extending selection to
# new caret position.
fun void HomeDisplayExtend=2346(,)

# Move caret to last position on display line.
fun void LineEndDisplay=2347(,)

# Move caret to last position on display line extending selection to new
# caret position.
fun void LineEndDisplayExtend=2348(,)

# These are like their namesakes Home(Extend)?, LineEnd(Extend)?, VCHome(Extend)?
# except they behave differently when word-wrap is enabled:
# They go first to the start / end of the display line, like (Home|LineEnd)Display
# The difference is that, the cursor is already at the point, it goes on to the start
# or end of the document line, as appropriate for (Home|LineEnd|VCHome)(Extend)?.

fun void HomeWrap=2349(,)
fun void HomeWrapExtend=2450(,)
fun void LineEndWrap=2451(,)
fun void LineEndWrapExtend=2452(,)
fun void VCHomeWrap=2453(,)
fun void VCHomeWrapExtend=2454(,)

# Copy the line containing the caret.
fun void LineCopy=2455(,)

# Move the caret inside current view if it's not there already.
fun void MoveCaretInsideView=2401(,)

# How many characters are on a line, including end of line characters?
fun int LineLength=2350(int line,)

# Highlight the characters at two positions.
fun void BraceHighlight=2351(position pos1, position pos2)

# Highlight the character at a position indicating there is no matching brace.
fun void BraceBadLight=2352(position pos,)

# Find the position of a matching brace or INVALID_POSITION if no match.
fun position BraceMatch=2353(position pos,)

# Are the end of line characters visible?
get bool GetViewEOL=2355(,)

# Make the end of line characters visible or invisible.
set void SetViewEOL=2356(bool visible,)

# Retrieve a pointer to the document object.
get int GetDocPointer=2357(,)

# Change the document object used.
set void SetDocPointer=2358(, int pointer)

# Set which document modification events are sent to the container.
set void SetModEventMask=2359(int mask,)

enu EdgeVisualStyle=EDGE_
val EDGE_NONE=0
val EDGE_LINE=1
val EDGE_BACKGROUND=2

# Retrieve the column number which text should be kept within.
get int GetEdgeColumn=2360(,)

# Set the column number of the edge.
# If text goes past the edge then it is highlighted.
set void SetEdgeColumn=2361(int column,)

# Retrieve the edge highlight mode.
get int GetEdgeMode=2362(,)

# The edge may be displayed by a line (EDGE_LINE) or by highlighting text that
# goes beyond it (EDGE_BACKGROUND) or not displayed at all (EDGE_NONE).
set void SetEdgeMode=2363(int mode,)

# Retrieve the colour used in edge indication.
get colour GetEdgeColour=2364(,)

# Change the colour used in edge indication.
set void SetEdgeColour=2365(colour edgeColour,)

# Sets the current caret position to be the search anchor.
fun void SearchAnchor=2366(,)

# Find some text starting at the search anchor.
# Does not ensure the selection is visible.
fun int SearchNext=2367(int flags, string text)

# Find some text starting at the search anchor and moving backwards.
# Does not ensure the selection is visible.
fun int SearchPrev=2368(int flags, string text)

# Retrieves the number of lines completely visible.
get int LinesOnScreen=2370(,)

# Set whether a pop up menu is displayed automatically when the user presses
# the wrong mouse button.
fun void UsePopUp=2371(bool allowPopUp,)

# Is the selection rectangular? The alternative is the more common stream selection.
get bool SelectionIsRectangle=2372(,)

# Set the zoom level. This number of points is added to the size of all fonts.
# It may be positive to magnify or negative to reduce.
set void SetZoom=2373(int zoom,)
# Retrieve the zoom level.
get int GetZoom=2374(,)

# Create a new document object.
# Starts with reference count of 1 and not selected into editor.
fun int CreateDocument=2375(,)
# Extend life of document.
fun void AddRefDocument=2376(, int doc)
# Release a reference to the document, deleting document if it fades to black.
fun void ReleaseDocument=2377(, int doc)

# Get which document modification events are sent to the container.
get int GetModEventMask=2378(,)

# Change internal focus flag.
set void SetFocus=2380(bool focus,)
# Get internal focus flag.
get bool GetFocus=2381(,)

enu Status=SC_STATUS_
val SC_STATUS_OK=0
val SC_STATUS_FAILURE=1
val SC_STATUS_BADALLOC=2

# Change error status - 0 = OK.
set void SetStatus=2382(int statusCode,)
# Get error status.
get int GetStatus=2383(,)

# Set whether the mouse is captured when its button is pressed.
set void SetMouseDownCaptures=2384(bool captures,)
# Get whether mouse gets captured.
get bool GetMouseDownCaptures=2385(,)

enu CursorShape=SC_CURSOR
val SC_CURSORNORMAL=-1
val SC_CURSORWAIT=4
# Sets the cursor to one of the SC_CURSOR* values.
set void SetCursor=2386(int cursorType,)
# Get cursor type.
get int GetCursor=2387(,)

# Change the way control characters are displayed:
# If symbol is < 32, keep the drawn way, else, use the given character.
set void SetControlCharSymbol=2388(int symbol,)
# Get the way control characters are displayed.
get int GetControlCharSymbol=2389(,)

# Move to the previous change in capitalisation.
fun void WordPartLeft=2390(,)
# Move to the previous change in capitalisation extending selection
# to new caret position.
fun void WordPartLeftExtend=2391(,)
# Move to the change next in capitalisation.
fun void WordPartRight=2392(,)
# Move to the next change in capitalisation extending selection
# to new caret position.
fun void WordPartRightExtend=2393(,)

# Constants for use with SetVisiblePolicy, similar to SetCaretPolicy.
val VISIBLE_SLOP=0x01
val VISIBLE_STRICT=0x04
# Set the way the display area is determined when a particular line
# is to be moved to by Find, FindNext, GotoLine, etc.
fun void SetVisiblePolicy=2394(int visiblePolicy, int visibleSlop)

# Delete back from the current position to the start of the line.
fun void DelLineLeft=2395(,)

# Delete forwards from the current position to the end of the line.
fun void DelLineRight=2396(,)

# Get and Set the xOffset (ie, horizonal scroll position).
set void SetXOffset=2397(int newOffset,)
get int GetXOffset=2398(,)

# Set the last x chosen value to be the caret x position.
fun void ChooseCaretX=2399(,)

# Set the focus to this Scintilla widget.
fun void GrabFocus=2400(,)

enu CaretPolicy=CARET_
# Caret policy, used by SetXCaretPolicy and SetYCaretPolicy.
# If CARET_SLOP is set, we can define a slop value: caretSlop.
# This value defines an unwanted zone (UZ) where the caret is... unwanted.
# This zone is defined as a number of pixels near the vertical margins,
# and as a number of lines near the horizontal margins.
# By keeping the caret away from the edges, it is seen within its context,
# so it is likely that the identifier that the caret is on can be completely seen,
# and that the current line is seen with some of the lines following it which are
# often dependent on that line.
val CARET_SLOP=0x01
# If CARET_STRICT is set, the policy is enforced... strictly.
# The caret is centred on the display if slop is not set,
# and cannot go in the UZ if slop is set.
val CARET_STRICT=0x04
# If CARET_JUMPS is set, the display is moved more energetically
# so the caret can move in the same direction longer before the policy is applied again.
val CARET_JUMPS=0x10
# If CARET_EVEN is not set, instead of having symmetrical UZs,
# the left and bottom UZs are extended up to right and top UZs respectively.
# This way, we favour the displaying of useful information: the begining of lines,
# where most code reside, and the lines after the caret, eg. the body of a function.
val CARET_EVEN=0x08

# Set the way the caret is kept visible when going sideway.
# The exclusion zone is given in pixels.
fun void SetXCaretPolicy=2402(int caretPolicy, int caretSlop)

# Set the way the line the caret is on is kept visible.
# The exclusion zone is given in lines.
fun void SetYCaretPolicy=2403(int caretPolicy, int caretSlop)

# Set printing to line wrapped (SC_WRAP_WORD) or not line wrapped (SC_WRAP_NONE).
set void SetPrintWrapMode=2406(int mode,)

# Is printing line wrapped?
get int GetPrintWrapMode=2407(,)

# Set a fore colour for active hotspots.
set void SetHotspotActiveFore=2410(bool useSetting, colour fore)

# Get the fore colour for active hotspots.
get colour GetHotspotActiveFore=2494(,)

# Set a back colour for active hotspots.
set void SetHotspotActiveBack=2411(bool useSetting, colour back)

# Get the back colour for active hotspots.
get colour GetHotspotActiveBack=2495(,)

# Enable / Disable underlining active hotspots.
set void SetHotspotActiveUnderline=2412(bool underline,)

# Get whether underlining for active hotspots.
get bool GetHotspotActiveUnderline=2496(,)

# Limit hotspots to single line so hotspots on two lines don't merge.
set void SetHotspotSingleLine=2421(bool singleLine,)

# Get the HotspotSingleLine property
get bool GetHotspotSingleLine=2497(,)

# Move caret between paragraphs (delimited by empty lines).
fun void ParaDown=2413(,)
fun void ParaDownExtend=2414(,)
fun void ParaUp=2415(,)
fun void ParaUpExtend=2416(,)

# Given a valid document position, return the previous position taking code
# page into account. Returns 0 if passed 0.
fun position PositionBefore=2417(position pos,)

# Given a valid document position, return the next position taking code
# page into account. Maximum value returned is the last position in the document.
fun position PositionAfter=2418(position pos,)

# Copy a range of text to the clipboard. Positions are clipped into the document.
fun void CopyRange=2419(position start, position end)

# Copy argument text to the clipboard.
fun void CopyText=2420(int length, string text)

enu SelectionMode=SC_SEL_
val SC_SEL_STREAM=0
val SC_SEL_RECTANGLE=1
val SC_SEL_LINES=2
val SC_SEL_THIN=3

# Set the selection mode to stream (SC_SEL_STREAM) or rectangular (SC_SEL_RECTANGLE/SC_SEL_THIN) or
# by lines (SC_SEL_LINES).
set void SetSelectionMode=2422(int mode,)

# Get the mode of the current selection.
get int GetSelectionMode=2423(,)

# Retrieve the position of the start of the selection at the given line (INVALID_POSITION if no selection on this line).
fun position GetLineSelStartPosition=2424(int line,)

# Retrieve the position of the end of the selection at the given line (INVALID_POSITION if no selection on this line).
fun position GetLineSelEndPosition=2425(int line,)

## RectExtended rectangular selection moves
# Move caret down one line, extending rectangular selection to new caret position.
fun void LineDownRectExtend=2426(,)

# Move caret up one line, extending rectangular selection to new caret position.
fun void LineUpRectExtend=2427(,)

# Move caret left one character, extending rectangular selection to new caret position.
fun void CharLeftRectExtend=2428(,)

# Move caret right one character, extending rectangular selection to new caret position.
fun void CharRightRectExtend=2429(,)

# Move caret to first position on line, extending rectangular selection to new caret position.
fun void HomeRectExtend=2430(,)

# Move caret to before first visible character on line.
# If already there move to first character on line.
# In either case, extend rectangular selection to new caret position.
fun void VCHomeRectExtend=2431(,)

# Move caret to last position on line, extending rectangular selection to new caret position.
fun void LineEndRectExtend=2432(,)

# Move caret one page up, extending rectangular selection to new caret position.
fun void PageUpRectExtend=2433(,)

# Move caret one page down, extending rectangular selection to new caret position.
fun void PageDownRectExtend=2434(,)


# Move caret to top of page, or one page up if already at top of page.
fun void StutteredPageUp=2435(,)

# Move caret to top of page, or one page up if already at top of page, extending selection to new caret position.
fun void StutteredPageUpExtend=2436(,)

# Move caret to bottom of page, or one page down if already at bottom of page.
fun void StutteredPageDown=2437(,)

# Move caret to bottom of page, or one page down if already at bottom of page, extending selection to new caret position.
fun void StutteredPageDownExtend=2438(,)


# Move caret left one word, position cursor at end of word.
fun void WordLeftEnd=2439(,)

# Move caret left one word, position cursor at end of word, extending selection to new caret position.
fun void WordLeftEndExtend=2440(,)

# Move caret right one word, position cursor at end of word.
fun void WordRightEnd=2441(,)

# Move caret right one word, position cursor at end of word, extending selection to new caret position.
fun void WordRightEndExtend=2442(,)

# Set the set of characters making up whitespace for when moving or selecting by word.
# Should be called after SetWordChars.
set void SetWhitespaceChars=2443(, string characters)

# Reset the set of characters for whitespace and word characters to the defaults.
fun void SetCharsDefault=2444(,)

# Get currently selected item position in the auto-completion list
fun int AutoCGetCurrent=2445(,)

# Get currently selected item text in the auto-completion list
# Returns the length of the item text
fun int AutoCGetCurrentText=2610(, stringresult s)

# Enlarge the document to a particular size of text bytes.
fun void Allocate=2446(int bytes,)

# Returns the target converted to UTF8.
# Return the length in bytes.
fun int TargetAsUTF8=2447(, stringresult s)

# Set the length of the utf8 argument for calling EncodedFromUTF8.
# Set to -1 and the string will be measured to the first nul.
fun void SetLengthForEncode=2448(int bytes,)

# Translates a UTF8 string into the document encoding.
# Return the length of the result in bytes.
# On error return 0.
fun int EncodedFromUTF8=2449(string utf8, stringresult encoded)

# Find the position of a column on a line taking into account tabs and
# multi-byte characters. If beyond end of line, return line end position.
fun int FindColumn=2456(int line, int column)

# Can the caret preferred x position only be changed by explicit movement commands?
get bool GetCaretSticky=2457(,)

# Stop the caret preferred x position changing when the user types.
set void SetCaretSticky=2458(bool useCaretStickyBehaviour,)

# Switch between sticky and non-sticky: meant to be bound to a key.
fun void ToggleCaretSticky=2459(,)

# Enable/Disable convert-on-paste for line endings
set void SetPasteConvertEndings=2467(bool convert,)

# Get convert-on-paste setting
get bool GetPasteConvertEndings=2468(,)

# Duplicate the selection. If selection empty duplicate the line containing the caret.
fun void SelectionDuplicate=2469(,)

val SC_ALPHA_TRANSPARENT=0
val SC_ALPHA_OPAQUE=255
val SC_ALPHA_NOALPHA=256

# Set background alpha of the caret line.
set void SetCaretLineBackAlpha=2470(int alpha,)

# Get the background alpha of the caret line.
get int GetCaretLineBackAlpha=2471(,)

enu CaretStyle=CARETSTYLE_
val CARETSTYLE_INVISIBLE=0
val CARETSTYLE_LINE=1
val CARETSTYLE_BLOCK=2

# Set the style of the caret to be drawn.
set void SetCaretStyle=2512(int caretStyle,)

# Returns the current style of the caret.
get int GetCaretStyle=2513(,)

# Set the indicator used for IndicatorFillRange and IndicatorClearRange
set void SetIndicatorCurrent=2500(int indicator,)

# Get the current indicator
get int GetIndicatorCurrent=2501(,)

# Set the value used for IndicatorFillRange
set void SetIndicatorValue=2502(int value,)

# Get the current indicator vaue
get int GetIndicatorValue=2503(,)

# Turn a indicator on over a range.
fun void IndicatorFillRange=2504(int position, int fillLength)

# Turn a indicator off over a range.
fun void IndicatorClearRange=2505(int position, int clearLength)

# Are any indicators present at position?
fun int IndicatorAllOnFor=2506(int position,)

# What value does a particular indicator have at at a position?
fun int IndicatorValueAt=2507(int indicator, int position)

# Where does a particular indicator start?
fun int IndicatorStart=2508(int indicator, int position)

# Where does a particular indicator end?
fun int IndicatorEnd=2509(int indicator, int position)

# Set number of entries in position cache
set void SetPositionCache=2514(int size,)

# How many entries are allocated to the position cache?
get int GetPositionCache=2515(,)

# Copy the selection, if selection empty copy the line with the caret
fun void CopyAllowLine=2519(,)

# Compact the document buffer and return a read-only pointer to the
# characters in the document.
get int GetCharacterPointer=2520(,)

# Always interpret keyboard input as Unicode
set void SetKeysUnicode=2521(bool keysUnicode,)

# Are keys always interpreted as Unicode?
get bool GetKeysUnicode=2522(,)

# Set the alpha fill colour of the given indicator.
set void IndicSetAlpha=2523(int indicator, int alpha)

# Get the alpha fill colour of the given indicator.
get int IndicGetAlpha=2524(int indicator,)

# Set extra ascent for each line
set void SetExtraAscent=2525(int extraAscent,)

# Get extra ascent for each line
get int GetExtraAscent=2526(,)

# Set extra descent for each line
set void SetExtraDescent=2527(int extraDescent,)

# Get extra descent for each line
get int GetExtraDescent=2528(,)

# Which symbol was defined for markerNumber with MarkerDefine
fun int MarkerSymbolDefined=2529(int markerNumber,)

# Set the text in the text margin for a line
set void MarginSetText=2530(int line, string text)

# Get the text in the text margin for a line
get int MarginGetText=2531(int line, stringresult text)

# Set the style number for the text margin for a line
set void MarginSetStyle=2532(int line, int style)

# Get the style number for the text margin for a line
get int MarginGetStyle=2533(int line,)

# Set the style in the text margin for a line
set void MarginSetStyles=2534(int line, string styles)

# Get the styles in the text margin for a line
get int MarginGetStyles=2535(int line, stringresult styles)

# Clear the margin text on all lines
fun void MarginTextClearAll=2536(,)

# Get the start of the range of style numbers used for margin text
set void MarginSetStyleOffset=2537(int style,)

# Get the start of the range of style numbers used for margin text
get int MarginGetStyleOffset=2538(,)

# Set the annotation text for a line
set void AnnotationSetText=2540(int line, string text)

# Get the annotation text for a line
get int AnnotationGetText=2541(int line, stringresult text)

# Set the style number for the annotations for a line
set void AnnotationSetStyle=2542(int line, int style)

# Get the style number for the annotations for a line
get int AnnotationGetStyle=2543(int line,)

# Set the annotation styles for a line
set void AnnotationSetStyles=2544(int line, string styles)

# Get the annotation styles for a line
get int AnnotationGetStyles=2545(int line, stringresult styles)

# Get the number of annotation lines for a line
get int AnnotationGetLines=2546(int line,)

# Clear the annotations from all lines
fun void AnnotationClearAll=2547(,)

enu AnnotationVisible=ANNOTATION_
val ANNOTATION_HIDDEN=0
val ANNOTATION_STANDARD=1
val ANNOTATION_BOXED=2

# Set the visibility for the annotations for a view
set void AnnotationSetVisible=2548(int visible,)

# Get the visibility for the annotations for a view
get int AnnotationGetVisible=2549(,)

# Get the start of the range of style numbers used for annotations
set void AnnotationSetStyleOffset=2550(int style,)

# Get the start of the range of style numbers used for annotations
get int AnnotationGetStyleOffset=2551(,)

val UNDO_MAY_COALESCE=1

# Add a container action to the undo stack
fun void AddUndoAction=2560(int token, int flags)

# Find the position of a character from a point within the window.
fun position CharPositionFromPoint=2561(int x, int y)

# Find the position of a character from a point within the window.
# Return INVALID_POSITION if not close to text.
fun position CharPositionFromPointClose=2562(int x, int y)

# Set whether multiple selections can be made
set void SetMultipleSelection=2563(bool multipleSelection,)

# Whether multiple selections can be made
get bool GetMultipleSelection=2564(,)

# Set whether typing can be performed into multiple selections
set void SetAdditionalSelectionTyping=2565(bool additionalSelectionTyping,)

# Whether typing can be performed into multiple selections
get bool GetAdditionalSelectionTyping=2566(,)

# Set whether additional carets will blink
set void SetAdditionalCaretsBlink=2567(bool additionalCaretsBlink,)

# Whether additional carets will blink
get bool GetAdditionalCaretsBlink=2568(,)

# Set whether additional carets are visible
set void SetAdditionalCaretsVisible=2608(bool additionalCaretsBlink,)

# Whether additional carets are visible
get bool GetAdditionalCaretsVisible=2609(,)

# How many selections are there?
get int GetSelections=2570(,)

# Clear selections to a single empty stream selection
fun void ClearSelections=2571(,)

# Set a simple selection
fun int SetSelection=2572(int caret,int anchor)

# Add a selection
fun int AddSelection=2573(int caret,int anchor)

# Set the main selection
set void SetMainSelection=2574(int selection,)

# Which selection is the main selection
get int GetMainSelection=2575(,)

set void SetSelectionNCaret=2576(int selection, position pos)
get position GetSelectionNCaret=2577(int selection,)
set void SetSelectionNAnchor=2578(int selection, position posAnchor)
get position GetSelectionNAnchor=2579(int selection,)
set void SetSelectionNCaretVirtualSpace=2580(int selection, int space)
get int GetSelectionNCaretVirtualSpace=2581(int selection,)
set void SetSelectionNAnchorVirtualSpace=2582(int selection, int space)
get int GetSelectionNAnchorVirtualSpace=2583(int selection,)

# Sets the position that starts the selection - this becomes the anchor.
set void SetSelectionNStart=2584(int selection, position pos)

# Returns the position at the start of the selection.
get position GetSelectionNStart=2585(int selection,)

# Sets the position that ends the selection - this becomes the currentPosition.
set void SetSelectionNEnd=2586(int selection, position pos,)

# Returns the position at the end of the selection.
get position GetSelectionNEnd=2587(int selection,)

set void SetRectangularSelectionCaret=2588(position pos,)
get position GetRectangularSelectionCaret=2589(,)
set void SetRectangularSelectionAnchor=2590(position posAnchor,)
get position GetRectangularSelectionAnchor=2591(,)
set void SetRectangularSelectionCaretVirtualSpace=2592(int space,)
get int GetRectangularSelectionCaretVirtualSpace=2593(,)
set void SetRectangularSelectionAnchorVirtualSpace=2594(int space,)
get int GetRectangularSelectionAnchorVirtualSpace=2595(,)

enu VirtualSpace=SCVS_
val SCVS_NONE=0
val SCVS_RECTANGULARSELECTION=1
val SCVS_USERACCESSIBLE=2

set void SetVirtualSpaceOptions=2596(int virtualSpaceOptions,)
get int GetVirtualSpaceOptions=2597(,)

# On GTK+, allow selecting the modifier key to use for mouse-based
# rectangular selection. Often the window manager requires Alt+Mouse Drag
# for moving windows.
# Valid values are SCMOD_CTRL(default), SCMOD_ALT, or SCMOD_SUPER.

set void SetRectangularSelectionModifier=2598(int modifier,)

# Get the modifier key used for rectangular selection.
get int GetRectangularSelectionModifier=2599(,)

# Set the foreground colour of additional selections.
# Must have previously called SetSelFore with non-zero first argument for this to have an effect.
set void SetAdditionalSelFore=2600(colour fore,)

# Set the background colour of additional selections.
# Must have previously called SetSelBack with non-zero first argument for this to have an effect.
set void SetAdditionalSelBack=2601(colour back,)

# Set the alpha of the selection.
set void SetAdditionalSelAlpha=2602(int alpha,)

# Get the alpha of the selection.
get int GetAdditionalSelAlpha=2603(,)

# Set the foreground colour of additional carets.
set void SetAdditionalCaretFore=2604(colour fore,)

# Get the foreground colour of additional carets.
get colour GetAdditionalCaretFore=2605(,)

# Set the main selection to the next selection.
fun void RotateSelection=2606(,)

# Swap that caret and anchor of the main selection.
fun void SwapMainAnchorCaret=2607(,)

# Start notifying the container of all key presses and commands.
fun void StartRecord=3001(,)

# Stop notifying the container of all key presses and commands.
fun void StopRecord=3002(,)

# Set the lexing language of the document.
set void SetLexer=4001(int lexer,)

# Retrieve the lexing language of the document.
get int GetLexer=4002(,)

# Colourise a segment of the document using the current lexing language.
fun void Colourise=4003(position start, position end)

# Set up a value that may be used by a lexer for some optional feature.
set void SetProperty=4004(string key, string value)

# Maximum value of keywordSet parameter of SetKeyWords.
val KEYWORDSET_MAX=8

# Set up the key words used by the lexer.
set void SetKeyWords=4005(int keywordSet, string keyWords)

# Set the lexing language of the document based on string name.
set void SetLexerLanguage=4006(, string language)

# Load a lexer library (dll / so).
fun void LoadLexerLibrary=4007(, string path)

# Retrieve a "property" value previously set with SetProperty.
fun int GetProperty=4008(string key, stringresult buf)

# Retrieve a "property" value previously set with SetProperty,
# with "$()" variable replacement on returned buffer.
fun int GetPropertyExpanded=4009(string key, stringresult buf)

# Retrieve a "property" value previously set with SetProperty,
# interpreted as an int AFTER any "$()" variable replacement.
get int GetPropertyInt=4010(string key,)

# Retrieve the number of bits the current lexer needs for styling.
get int GetStyleBitsNeeded=4011(,)

# Retrieve the name of the lexer.
# Return the length of the text.
get int GetLexerLanguage=4012(, stringresult text)

# Notifications
# Type of modification and the action which caused the modification.
# These are defined as a bit mask to make it easy to specify which notifications are wanted.
# One bit is set from each of SC_MOD_* and SC_PERFORMED_*.
enu ModificationFlags=SC_MOD_ SC_PERFORMED_ SC_LAST
val SC_MOD_INSERTTEXT=0x1
val SC_MOD_DELETETEXT=0x2
val SC_MOD_CHANGESTYLE=0x4
val SC_MOD_CHANGEFOLD=0x8
val SC_PERFORMED_USER=0x10
val SC_PERFORMED_UNDO=0x20
val SC_PERFORMED_REDO=0x40
val SC_MULTISTEPUNDOREDO=0x80
val SC_LASTSTEPINUNDOREDO=0x100
val SC_MOD_CHANGEMARKER=0x200
val SC_MOD_BEFOREINSERT=0x400
val SC_MOD_BEFOREDELETE=0x800
val SC_MULTILINEUNDOREDO=0x1000
val SC_STARTACTION=0x2000
val SC_MOD_CHANGEINDICATOR=0x4000
val SC_MOD_CHANGELINESTATE=0x8000
val SC_MOD_CHANGEMARGIN=0x10000
val SC_MOD_CHANGEANNOTATION=0x20000
val SC_MOD_CONTAINER=0x40000
val SC_MODEVENTMASKALL=0x7FFFF

# For compatibility, these go through the COMMAND notification rather than NOTIFY
# and should have had exactly the same values as the EN_* constants.
# Unfortunately the SETFOCUS and KILLFOCUS are flipped over from EN_*
# As clients depend on these constants, this will not be changed.
val SCEN_CHANGE=768
val SCEN_SETFOCUS=512
val SCEN_KILLFOCUS=256

# Symbolic key codes and modifier flags.
# ASCII and other printable characters below 256.
# Extended keys above 300.

enu Keys=SCK_
val SCK_DOWN=300
val SCK_UP=301
val SCK_LEFT=302
val SCK_RIGHT=303
val SCK_HOME=304
val SCK_END=305
val SCK_PRIOR=306
val SCK_NEXT=307
val SCK_DELETE=308
val SCK_INSERT=309
val SCK_ESCAPE=7
val SCK_BACK=8
val SCK_TAB=9
val SCK_RETURN=13
val SCK_ADD=310
val SCK_SUBTRACT=311
val SCK_DIVIDE=312
val SCK_WIN=313
val SCK_RWIN=314
val SCK_MENU=315

enu KeyMod=SCMOD_
val SCMOD_NORM=0
val SCMOD_SHIFT=1
val SCMOD_CTRL=2
val SCMOD_ALT=4
val SCMOD_SUPER=8

################################################
# For SciLexer.h
enu Lexer=SCLEX_
val SCLEX_CONTAINER=0
val SCLEX_NULL=1
val SCLEX_PYTHON=2
val SCLEX_CPP=3
val SCLEX_HTML=4
val SCLEX_XML=5
val SCLEX_PERL=6
val SCLEX_SQL=7
val SCLEX_VB=8
val SCLEX_PROPERTIES=9
val SCLEX_ERRORLIST=10
val SCLEX_MAKEFILE=11
val SCLEX_BATCH=12
val SCLEX_XCODE=13
val SCLEX_LATEX=14
val SCLEX_LUA=15
val SCLEX_DIFF=16
val SCLEX_CONF=17
val SCLEX_PASCAL=18
val SCLEX_AVE=19
val SCLEX_ADA=20
val SCLEX_LISP=21
val SCLEX_RUBY=22
val SCLEX_EIFFEL=23
val SCLEX_EIFFELKW=24
val SCLEX_TCL=25
val SCLEX_NNCRONTAB=26
val SCLEX_BULLANT=27
val SCLEX_VBSCRIPT=28
val SCLEX_BAAN=31
val SCLEX_MATLAB=32
val SCLEX_SCRIPTOL=33
val SCLEX_ASM=34
val SCLEX_CPPNOCASE=35
val SCLEX_FORTRAN=36
val SCLEX_F77=37
val SCLEX_CSS=38
val SCLEX_POV=39
val SCLEX_LOUT=40
val SCLEX_ESCRIPT=41
val SCLEX_PS=42
val SCLEX_NSIS=43
val SCLEX_MMIXAL=44
val SCLEX_CLW=45
val SCLEX_CLWNOCASE=46
val SCLEX_LOT=47
val SCLEX_YAML=48
val SCLEX_TEX=49
val SCLEX_METAPOST=50
val SCLEX_POWERBASIC=51
val SCLEX_FORTH=52
val SCLEX_ERLANG=53
val SCLEX_OCTAVE=54
val SCLEX_MSSQL=55
val SCLEX_VERILOG=56
val SCLEX_KIX=57
val SCLEX_GUI4CLI=58
val SCLEX_SPECMAN=59
val SCLEX_AU3=60
val SCLEX_APDL=61
val SCLEX_BASH=62
val SCLEX_ASN1=63
val SCLEX_VHDL=64
val SCLEX_CAML=65
val SCLEX_BLITZBASIC=66
val SCLEX_PUREBASIC=67
val SCLEX_HASKELL=68
val SCLEX_PHPSCRIPT=69
val SCLEX_TADS3=70
val SCLEX_REBOL=71
val SCLEX_SMALLTALK=72
val SCLEX_FLAGSHIP=73
val SCLEX_CSOUND=74
val SCLEX_FREEBASIC=75
val SCLEX_INNOSETUP=76
val SCLEX_OPAL=77
val SCLEX_SPICE=78
val SCLEX_D=79
val SCLEX_CMAKE=80
val SCLEX_GAP=81
val SCLEX_PLM=82
val SCLEX_PROGRESS=83
val SCLEX_ABAQUS=84
val SCLEX_ASYMPTOTE=85
val SCLEX_R=86
val SCLEX_MAGIK=87
val SCLEX_POWERSHELL=88
val SCLEX_MYSQL=89
val SCLEX_PO=90
val SCLEX_TAL=91
val SCLEX_COBOL=92
val SCLEX_TACL=93
val SCLEX_SORCUS=94
val SCLEX_POWERPRO=95
val SCLEX_NIMROD=96
val SCLEX_SML=97
val SCLEX_MARKDOWN=98

# When a lexer specifies its language as SCLEX_AUTOMATIC it receives a
# value assigned in sequence from SCLEX_AUTOMATIC+1.
val SCLEX_AUTOMATIC=1000
# Lexical states for SCLEX_PYTHON
lex Python=SCLEX_PYTHON SCE_P_
lex Nimrod=SCLEX_NIMROD SCE_P_
val SCE_P_DEFAULT=0
val SCE_P_COMMENTLINE=1
val SCE_P_NUMBER=2
val SCE_P_STRING=3
val SCE_P_CHARACTER=4
val SCE_P_WORD=5
val SCE_P_TRIPLE=6
val SCE_P_TRIPLEDOUBLE=7
val SCE_P_CLASSNAME=8
val SCE_P_DEFNAME=9
val SCE_P_OPERATOR=10
val SCE_P_IDENTIFIER=11
val SCE_P_COMMENTBLOCK=12
val SCE_P_STRINGEOL=13
val SCE_P_WORD2=14
val SCE_P_DECORATOR=15
# Lexical states for SCLEX_CPP
lex Cpp=SCLEX_CPP SCE_C_
lex BullAnt=SCLEX_BULLANT SCE_C_
val SCE_C_DEFAULT=0
val SCE_C_COMMENT=1
val SCE_C_COMMENTLINE=2
val SCE_C_COMMENTDOC=3
val SCE_C_NUMBER=4
val SCE_C_WORD=5
val SCE_C_STRING=6
val SCE_C_CHARACTER=7
val SCE_C_UUID=8
val SCE_C_PREPROCESSOR=9
val SCE_C_OPERATOR=10
val SCE_C_IDENTIFIER=11
val SCE_C_STRINGEOL=12
val SCE_C_VERBATIM=13
val SCE_C_REGEX=14
val SCE_C_COMMENTLINEDOC=15
val SCE_C_WORD2=16
val SCE_C_COMMENTDOCKEYWORD=17
val SCE_C_COMMENTDOCKEYWORDERROR=18
val SCE_C_GLOBALCLASS=19
# Lexical states for SCLEX_D
lex D=SCLEX_D SCE_D_
val SCE_D_DEFAULT=0
val SCE_D_COMMENT=1
val SCE_D_COMMENTLINE=2
val SCE_D_COMMENTDOC=3
val SCE_D_COMMENTNESTED=4
val SCE_D_NUMBER=5
val SCE_D_WORD=6
val SCE_D_WORD2=7
val SCE_D_WORD3=8
val SCE_D_TYPEDEF=9
val SCE_D_STRING=10
val SCE_D_STRINGEOL=11
val SCE_D_CHARACTER=12
val SCE_D_OPERATOR=13
val SCE_D_IDENTIFIER=14
val SCE_D_COMMENTLINEDOC=15
val SCE_D_COMMENTDOCKEYWORD=16
val SCE_D_COMMENTDOCKEYWORDERROR=17
val SCE_D_STRINGB=18
val SCE_D_STRINGR=19
val SCE_D_WORD5=20
val SCE_D_WORD6=21
val SCE_D_WORD7=22
# Lexical states for SCLEX_TCL
lex TCL=SCLEX_TCL SCE_TCL_
val SCE_TCL_DEFAULT=0
val SCE_TCL_COMMENT=1
val SCE_TCL_COMMENTLINE=2
val SCE_TCL_NUMBER=3
val SCE_TCL_WORD_IN_QUOTE=4
val SCE_TCL_IN_QUOTE=5
val SCE_TCL_OPERATOR=6
val SCE_TCL_IDENTIFIER=7
val SCE_TCL_SUBSTITUTION=8
val SCE_TCL_SUB_BRACE=9
val SCE_TCL_MODIFIER=10
val SCE_TCL_EXPAND=11
val SCE_TCL_WORD=12
val SCE_TCL_WORD2=13
val SCE_TCL_WORD3=14
val SCE_TCL_WORD4=15
val SCE_TCL_WORD5=16
val SCE_TCL_WORD6=17
val SCE_TCL_WORD7=18
val SCE_TCL_WORD8=19
val SCE_TCL_COMMENT_BOX=20
val SCE_TCL_BLOCK_COMMENT=21
# Lexical states for SCLEX_HTML, SCLEX_XML
lex HTML=SCLEX_HTML SCE_H
lex XML=SCLEX_XML SCE_H
lex ASP=SCLEX_ASP SCE_H
lex PHP=SCLEX_PHP SCE_H
val SCE_H_DEFAULT=0
val SCE_H_TAG=1
val SCE_H_TAGUNKNOWN=2
val SCE_H_ATTRIBUTE=3
val SCE_H_ATTRIBUTEUNKNOWN=4
val SCE_H_NUMBER=5
val SCE_H_DOUBLESTRING=6
val SCE_H_SINGLESTRING=7
val SCE_H_OTHER=8
val SCE_H_COMMENT=9
val SCE_H_ENTITY=10
# XML and ASP
val SCE_H_TAGEND=11
val SCE_H_XMLSTART=12
val SCE_H_XMLEND=13
val SCE_H_SCRIPT=14
val SCE_H_ASP=15
val SCE_H_ASPAT=16
val SCE_H_CDATA=17
val SCE_H_QUESTION=18
# More HTML
val SCE_H_VALUE=19
# X-Code
val SCE_H_XCCOMMENT=20
# SGML
val SCE_H_SGML_DEFAULT=21
val SCE_H_SGML_COMMAND=22
val SCE_H_SGML_1ST_PARAM=23
val SCE_H_SGML_DOUBLESTRING=24
val SCE_H_SGML_SIMPLESTRING=25
val SCE_H_SGML_ERROR=26
val SCE_H_SGML_SPECIAL=27
val SCE_H_SGML_ENTITY=28
val SCE_H_SGML_COMMENT=29
val SCE_H_SGML_1ST_PARAM_COMMENT=30
val SCE_H_SGML_BLOCK_DEFAULT=31
# Embedded Javascript
val SCE_HJ_START=40
val SCE_HJ_DEFAULT=41
val SCE_HJ_COMMENT=42
val SCE_HJ_COMMENTLINE=43
val SCE_HJ_COMMENTDOC=44
val SCE_HJ_NUMBER=45
val SCE_HJ_WORD=46
val SCE_HJ_KEYWORD=47
val SCE_HJ_DOUBLESTRING=48
val SCE_HJ_SINGLESTRING=49
val SCE_HJ_SYMBOLS=50
val SCE_HJ_STRINGEOL=51
val SCE_HJ_REGEX=52
# ASP Javascript
val SCE_HJA_START=55
val SCE_HJA_DEFAULT=56
val SCE_HJA_COMMENT=57
val SCE_HJA_COMMENTLINE=58
val SCE_HJA_COMMENTDOC=59
val SCE_HJA_NUMBER=60
val SCE_HJA_WORD=61
val SCE_HJA_KEYWORD=62
val SCE_HJA_DOUBLESTRING=63
val SCE_HJA_SINGLESTRING=64
val SCE_HJA_SYMBOLS=65
val SCE_HJA_STRINGEOL=66
val SCE_HJA_REGEX=67
# Embedded VBScript
val SCE_HB_START=70
val SCE_HB_DEFAULT=71
val SCE_HB_COMMENTLINE=72
val SCE_HB_NUMBER=73
val SCE_HB_WORD=74
val SCE_HB_STRING=75
val SCE_HB_IDENTIFIER=76
val SCE_HB_STRINGEOL=77
# ASP VBScript
val SCE_HBA_START=80
val SCE_HBA_DEFAULT=81
val SCE_HBA_COMMENTLINE=82
val SCE_HBA_NUMBER=83
val SCE_HBA_WORD=84
val SCE_HBA_STRING=85
val SCE_HBA_IDENTIFIER=86
val SCE_HBA_STRINGEOL=87
# Embedded Python
val SCE_HP_START=90
val SCE_HP_DEFAULT=91
val SCE_HP_COMMENTLINE=92
val SCE_HP_NUMBER=93
val SCE_HP_STRING=94
val SCE_HP_CHARACTER=95
val SCE_HP_WORD=96
val SCE_HP_TRIPLE=97
val SCE_HP_TRIPLEDOUBLE=98
val SCE_HP_CLASSNAME=99
val SCE_HP_DEFNAME=100
val SCE_HP_OPERATOR=101
val SCE_HP_IDENTIFIER=102
# PHP
val SCE_HPHP_COMPLEX_VARIABLE=104
# ASP Python
val SCE_HPA_START=105
val SCE_HPA_DEFAULT=106
val SCE_HPA_COMMENTLINE=107
val SCE_HPA_NUMBER=108
val SCE_HPA_STRING=109
val SCE_HPA_CHARACTER=110
val SCE_HPA_WORD=111
val SCE_HPA_TRIPLE=112
val SCE_HPA_TRIPLEDOUBLE=113
val SCE_HPA_CLASSNAME=114
val SCE_HPA_DEFNAME=115
val SCE_HPA_OPERATOR=116
val SCE_HPA_IDENTIFIER=117
# PHP
val SCE_HPHP_DEFAULT=118
val SCE_HPHP_HSTRING=119
val SCE_HPHP_SIMPLESTRING=120
val SCE_HPHP_WORD=121
val SCE_HPHP_NUMBER=122
val SCE_HPHP_VARIABLE=123
val SCE_HPHP_COMMENT=124
val SCE_HPHP_COMMENTLINE=125
val SCE_HPHP_HSTRING_VARIABLE=126
val SCE_HPHP_OPERATOR=127
# Lexical states for SCLEX_PERL
lex Perl=SCLEX_PERL SCE_PL_
val SCE_PL_DEFAULT=0
val SCE_PL_ERROR=1
val SCE_PL_COMMENTLINE=2
val SCE_PL_POD=3
val SCE_PL_NUMBER=4
val SCE_PL_WORD=5
val SCE_PL_STRING=6
val SCE_PL_CHARACTER=7
val SCE_PL_PUNCTUATION=8
val SCE_PL_PREPROCESSOR=9
val SCE_PL_OPERATOR=10
val SCE_PL_IDENTIFIER=11
val SCE_PL_SCALAR=12
val SCE_PL_ARRAY=13
val SCE_PL_HASH=14
val SCE_PL_SYMBOLTABLE=15
val SCE_PL_VARIABLE_INDEXER=16
val SCE_PL_REGEX=17
val SCE_PL_REGSUBST=18
val SCE_PL_LONGQUOTE=19
val SCE_PL_BACKTICKS=20
val SCE_PL_DATASECTION=21
val SCE_PL_HERE_DELIM=22
val SCE_PL_HERE_Q=23
val SCE_PL_HERE_QQ=24
val SCE_PL_HERE_QX=25
val SCE_PL_STRING_Q=26
val SCE_PL_STRING_QQ=27
val SCE_PL_STRING_QX=28
val SCE_PL_STRING_QR=29
val SCE_PL_STRING_QW=30
val SCE_PL_POD_VERB=31
val SCE_PL_SUB_PROTOTYPE=40
val SCE_PL_FORMAT_IDENT=41
val SCE_PL_FORMAT=42
# Lexical states for SCLEX_RUBY
lex Ruby=SCLEX_RUBY SCE_RB_
val SCE_RB_DEFAULT=0
val SCE_RB_ERROR=1
val SCE_RB_COMMENTLINE=2
val SCE_RB_POD=3
val SCE_RB_NUMBER=4
val SCE_RB_WORD=5
val SCE_RB_STRING=6
val SCE_RB_CHARACTER=7
val SCE_RB_CLASSNAME=8
val SCE_RB_DEFNAME=9
val SCE_RB_OPERATOR=10
val SCE_RB_IDENTIFIER=11
val SCE_RB_REGEX=12
val SCE_RB_GLOBAL=13
val SCE_RB_SYMBOL=14
val SCE_RB_MODULE_NAME=15
val SCE_RB_INSTANCE_VAR=16
val SCE_RB_CLASS_VAR=17
val SCE_RB_BACKTICKS=18
val SCE_RB_DATASECTION=19
val SCE_RB_HERE_DELIM=20
val SCE_RB_HERE_Q=21
val SCE_RB_HERE_QQ=22
val SCE_RB_HERE_QX=23
val SCE_RB_STRING_Q=24
val SCE_RB_STRING_QQ=25
val SCE_RB_STRING_QX=26
val SCE_RB_STRING_QR=27
val SCE_RB_STRING_QW=28
val SCE_RB_WORD_DEMOTED=29
val SCE_RB_STDIN=30
val SCE_RB_STDOUT=31
val SCE_RB_STDERR=40
val SCE_RB_UPPER_BOUND=41
# Lexical states for SCLEX_VB, SCLEX_VBSCRIPT, SCLEX_POWERBASIC
lex VB=SCLEX_VB SCE_B_
lex VBScript=SCLEX_VBSCRIPT SCE_B_
lex PowerBasic=SCLEX_POWERBASIC SCE_B_
val SCE_B_DEFAULT=0
val SCE_B_COMMENT=1
val SCE_B_NUMBER=2
val SCE_B_KEYWORD=3
val SCE_B_STRING=4
val SCE_B_PREPROCESSOR=5
val SCE_B_OPERATOR=6
val SCE_B_IDENTIFIER=7
val SCE_B_DATE=8
val SCE_B_STRINGEOL=9
val SCE_B_KEYWORD2=10
val SCE_B_KEYWORD3=11
val SCE_B_KEYWORD4=12
val SCE_B_CONSTANT=13
val SCE_B_ASM=14
val SCE_B_LABEL=15
val SCE_B_ERROR=16
val SCE_B_HEXNUMBER=17
val SCE_B_BINNUMBER=18
# Lexical states for SCLEX_PROPERTIES
lex Properties=SCLEX_PROPERTIES SCE_PROPS_
val SCE_PROPS_DEFAULT=0
val SCE_PROPS_COMMENT=1
val SCE_PROPS_SECTION=2
val SCE_PROPS_ASSIGNMENT=3
val SCE_PROPS_DEFVAL=4
val SCE_PROPS_KEY=5
# Lexical states for SCLEX_LATEX
lex LaTeX=SCLEX_LATEX SCE_L_
val SCE_L_DEFAULT=0
val SCE_L_COMMAND=1
val SCE_L_TAG=2
val SCE_L_MATH=3
val SCE_L_COMMENT=4
# Lexical states for SCLEX_LUA
lex Lua=SCLEX_LUA SCE_LUA_
val SCE_LUA_DEFAULT=0
val SCE_LUA_COMMENT=1
val SCE_LUA_COMMENTLINE=2
val SCE_LUA_COMMENTDOC=3
val SCE_LUA_NUMBER=4
val SCE_LUA_WORD=5
val SCE_LUA_STRING=6
val SCE_LUA_CHARACTER=7
val SCE_LUA_LITERALSTRING=8
val SCE_LUA_PREPROCESSOR=9
val SCE_LUA_OPERATOR=10
val SCE_LUA_IDENTIFIER=11
val SCE_LUA_STRINGEOL=12
val SCE_LUA_WORD2=13
val SCE_LUA_WORD3=14
val SCE_LUA_WORD4=15
val SCE_LUA_WORD5=16
val SCE_LUA_WORD6=17
val SCE_LUA_WORD7=18
val SCE_LUA_WORD8=19
# Lexical states for SCLEX_ERRORLIST
lex ErrorList=SCLEX_ERRORLIST SCE_ERR_
val SCE_ERR_DEFAULT=0
val SCE_ERR_PYTHON=1
val SCE_ERR_GCC=2
val SCE_ERR_MS=3
val SCE_ERR_CMD=4
val SCE_ERR_BORLAND=5
val SCE_ERR_PERL=6
val SCE_ERR_NET=7
val SCE_ERR_LUA=8
val SCE_ERR_CTAG=9
val SCE_ERR_DIFF_CHANGED=10
val SCE_ERR_DIFF_ADDITION=11
val SCE_ERR_DIFF_DELETION=12
val SCE_ERR_DIFF_MESSAGE=13
val SCE_ERR_PHP=14
val SCE_ERR_ELF=15
val SCE_ERR_IFC=16
val SCE_ERR_IFORT=17
val SCE_ERR_ABSF=18
val SCE_ERR_TIDY=19
val SCE_ERR_JAVA_STACK=20
val SCE_ERR_VALUE=21
# Lexical states for SCLEX_BATCH
lex Batch=SCLEX_BATCH SCE_BAT_
val SCE_BAT_DEFAULT=0
val SCE_BAT_COMMENT=1
val SCE_BAT_WORD=2
val SCE_BAT_LABEL=3
val SCE_BAT_HIDE=4
val SCE_BAT_COMMAND=5
val SCE_BAT_IDENTIFIER=6
val SCE_BAT_OPERATOR=7
# Lexical states for SCLEX_MAKEFILE
lex MakeFile=SCLEX_MAKEFILE SCE_MAKE_
val SCE_MAKE_DEFAULT=0
val SCE_MAKE_COMMENT=1
val SCE_MAKE_PREPROCESSOR=2
val SCE_MAKE_IDENTIFIER=3
val SCE_MAKE_OPERATOR=4
val SCE_MAKE_TARGET=5
val SCE_MAKE_IDEOL=9
# Lexical states for SCLEX_DIFF
lex Diff=SCLEX_DIFF SCE_DIFF_
val SCE_DIFF_DEFAULT=0
val SCE_DIFF_COMMENT=1
val SCE_DIFF_COMMAND=2
val SCE_DIFF_HEADER=3
val SCE_DIFF_POSITION=4
val SCE_DIFF_DELETED=5
val SCE_DIFF_ADDED=6
val SCE_DIFF_CHANGED=7
# Lexical states for SCLEX_CONF (Apache Configuration Files Lexer)
lex Conf=SCLEX_CONF SCE_CONF_
val SCE_CONF_DEFAULT=0
val SCE_CONF_COMMENT=1
val SCE_CONF_NUMBER=2
val SCE_CONF_IDENTIFIER=3
val SCE_CONF_EXTENSION=4
val SCE_CONF_PARAMETER=5
val SCE_CONF_STRING=6
val SCE_CONF_OPERATOR=7
val SCE_CONF_IP=8
val SCE_CONF_DIRECTIVE=9
# Lexical states for SCLEX_AVE, Avenue
lex Avenue=SCLEX_AVE SCE_AVE_
val SCE_AVE_DEFAULT=0
val SCE_AVE_COMMENT=1
val SCE_AVE_NUMBER=2
val SCE_AVE_WORD=3
val SCE_AVE_STRING=6
val SCE_AVE_ENUM=7
val SCE_AVE_STRINGEOL=8
val SCE_AVE_IDENTIFIER=9
val SCE_AVE_OPERATOR=10
val SCE_AVE_WORD1=11
val SCE_AVE_WORD2=12
val SCE_AVE_WORD3=13
val SCE_AVE_WORD4=14
val SCE_AVE_WORD5=15
val SCE_AVE_WORD6=16
# Lexical states for SCLEX_ADA
lex Ada=SCLEX_ADA SCE_ADA_
val SCE_ADA_DEFAULT=0
val SCE_ADA_WORD=1
val SCE_ADA_IDENTIFIER=2
val SCE_ADA_NUMBER=3
val SCE_ADA_DELIMITER=4
val SCE_ADA_CHARACTER=5
val SCE_ADA_CHARACTEREOL=6
val SCE_ADA_STRING=7
val SCE_ADA_STRINGEOL=8
val SCE_ADA_LABEL=9
val SCE_ADA_COMMENTLINE=10
val SCE_ADA_ILLEGAL=11
# Lexical states for SCLEX_BAAN
lex Baan=SCLEX_BAAN SCE_BAAN_
val SCE_BAAN_DEFAULT=0
val SCE_BAAN_COMMENT=1
val SCE_BAAN_COMMENTDOC=2
val SCE_BAAN_NUMBER=3
val SCE_BAAN_WORD=4
val SCE_BAAN_STRING=5
val SCE_BAAN_PREPROCESSOR=6
val SCE_BAAN_OPERATOR=7
val SCE_BAAN_IDENTIFIER=8
val SCE_BAAN_STRINGEOL=9
val SCE_BAAN_WORD2=10
# Lexical states for SCLEX_LISP
lex Lisp=SCLEX_LISP SCE_LISP_
val SCE_LISP_DEFAULT=0
val SCE_LISP_COMMENT=1
val SCE_LISP_NUMBER=2
val SCE_LISP_KEYWORD=3
val SCE_LISP_KEYWORD_KW=4
val SCE_LISP_SYMBOL=5
val SCE_LISP_STRING=6
val SCE_LISP_STRINGEOL=8
val SCE_LISP_IDENTIFIER=9
val SCE_LISP_OPERATOR=10
val SCE_LISP_SPECIAL=11
val SCE_LISP_MULTI_COMMENT=12
# Lexical states for SCLEX_EIFFEL and SCLEX_EIFFELKW
lex Eiffel=SCLEX_EIFFEL SCE_EIFFEL_
lex EiffelKW=SCLEX_EIFFELKW SCE_EIFFEL_
val SCE_EIFFEL_DEFAULT=0
val SCE_EIFFEL_COMMENTLINE=1
val SCE_EIFFEL_NUMBER=2
val SCE_EIFFEL_WORD=3
val SCE_EIFFEL_STRING=4
val SCE_EIFFEL_CHARACTER=5
val SCE_EIFFEL_OPERATOR=6
val SCE_EIFFEL_IDENTIFIER=7
val SCE_EIFFEL_STRINGEOL=8
# Lexical states for SCLEX_NNCRONTAB (nnCron crontab Lexer)
lex NNCronTab=SCLEX_NNCRONTAB SCE_NNCRONTAB_
val SCE_NNCRONTAB_DEFAULT=0
val SCE_NNCRONTAB_COMMENT=1
val SCE_NNCRONTAB_TASK=2
val SCE_NNCRONTAB_SECTION=3
val SCE_NNCRONTAB_KEYWORD=4
val SCE_NNCRONTAB_MODIFIER=5
val SCE_NNCRONTAB_ASTERISK=6
val SCE_NNCRONTAB_NUMBER=7
val SCE_NNCRONTAB_STRING=8
val SCE_NNCRONTAB_ENVIRONMENT=9
val SCE_NNCRONTAB_IDENTIFIER=10
# Lexical states for SCLEX_FORTH (Forth Lexer)
lex Forth=SCLEX_FORTH SCE_FORTH_
val SCE_FORTH_DEFAULT=0
val SCE_FORTH_COMMENT=1
val SCE_FORTH_COMMENT_ML=2
val SCE_FORTH_IDENTIFIER=3
val SCE_FORTH_CONTROL=4
val SCE_FORTH_KEYWORD=5
val SCE_FORTH_DEFWORD=6
val SCE_FORTH_PREWORD1=7
val SCE_FORTH_PREWORD2=8
val SCE_FORTH_NUMBER=9
val SCE_FORTH_STRING=10
val SCE_FORTH_LOCALE=11
# Lexical states for SCLEX_MATLAB
lex MatLab=SCLEX_MATLAB SCE_MATLAB_
val SCE_MATLAB_DEFAULT=0
val SCE_MATLAB_COMMENT=1
val SCE_MATLAB_COMMAND=2
val SCE_MATLAB_NUMBER=3
val SCE_MATLAB_KEYWORD=4
# single quoted string
val SCE_MATLAB_STRING=5
val SCE_MATLAB_OPERATOR=6
val SCE_MATLAB_IDENTIFIER=7
val SCE_MATLAB_DOUBLEQUOTESTRING=8
# Lexical states for SCLEX_SCRIPTOL
lex Sol=SCLEX_SCRIPTOL SCE_SCRIPTOL_
val SCE_SCRIPTOL_DEFAULT=0
val SCE_SCRIPTOL_WHITE=1
val SCE_SCRIPTOL_COMMENTLINE=2
val SCE_SCRIPTOL_PERSISTENT=3
val SCE_SCRIPTOL_CSTYLE=4
val SCE_SCRIPTOL_COMMENTBLOCK=5
val SCE_SCRIPTOL_NUMBER=6
val SCE_SCRIPTOL_STRING=7
val SCE_SCRIPTOL_CHARACTER=8
val SCE_SCRIPTOL_STRINGEOL=9
val SCE_SCRIPTOL_KEYWORD=10
val SCE_SCRIPTOL_OPERATOR=11
val SCE_SCRIPTOL_IDENTIFIER=12
val SCE_SCRIPTOL_TRIPLE=13
val SCE_SCRIPTOL_CLASSNAME=14
val SCE_SCRIPTOL_PREPROCESSOR=15
# Lexical states for SCLEX_ASM
lex Asm=SCLEX_ASM SCE_ASM_
val SCE_ASM_DEFAULT=0
val SCE_ASM_COMMENT=1
val SCE_ASM_NUMBER=2
val SCE_ASM_STRING=3
val SCE_ASM_OPERATOR=4
val SCE_ASM_IDENTIFIER=5
val SCE_ASM_CPUINSTRUCTION=6
val SCE_ASM_MATHINSTRUCTION=7
val SCE_ASM_REGISTER=8
val SCE_ASM_DIRECTIVE=9
val SCE_ASM_DIRECTIVEOPERAND=10
val SCE_ASM_COMMENTBLOCK=11
val SCE_ASM_CHARACTER=12
val SCE_ASM_STRINGEOL=13
val SCE_ASM_EXTINSTRUCTION=14
# Lexical states for SCLEX_FORTRAN
lex Fortran=SCLEX_FORTRAN SCE_F_
lex F77=SCLEX_F77 SCE_F_
val SCE_F_DEFAULT=0
val SCE_F_COMMENT=1
val SCE_F_NUMBER=2
val SCE_F_STRING1=3
val SCE_F_STRING2=4
val SCE_F_STRINGEOL=5
val SCE_F_OPERATOR=6
val SCE_F_IDENTIFIER=7
val SCE_F_WORD=8
val SCE_F_WORD2=9
val SCE_F_WORD3=10
val SCE_F_PREPROCESSOR=11
val SCE_F_OPERATOR2=12
val SCE_F_LABEL=13
val SCE_F_CONTINUATION=14
# Lexical states for SCLEX_CSS
lex CSS=SCLEX_CSS SCE_CSS_
val SCE_CSS_DEFAULT=0
val SCE_CSS_TAG=1
val SCE_CSS_CLASS=2
val SCE_CSS_PSEUDOCLASS=3
val SCE_CSS_UNKNOWN_PSEUDOCLASS=4
val SCE_CSS_OPERATOR=5
val SCE_CSS_IDENTIFIER=6
val SCE_CSS_UNKNOWN_IDENTIFIER=7
val SCE_CSS_VALUE=8
val SCE_CSS_COMMENT=9
val SCE_CSS_ID=10
val SCE_CSS_IMPORTANT=11
val SCE_CSS_DIRECTIVE=12
val SCE_CSS_DOUBLESTRING=13
val SCE_CSS_SINGLESTRING=14
val SCE_CSS_IDENTIFIER2=15
val SCE_CSS_ATTRIBUTE=16
val SCE_CSS_IDENTIFIER3=17
val SCE_CSS_PSEUDOELEMENT=18
val SCE_CSS_EXTENDED_IDENTIFIER=19
val SCE_CSS_EXTENDED_PSEUDOCLASS=20
val SCE_CSS_EXTENDED_PSEUDOELEMENT=21
# Lexical states for SCLEX_POV
lex POV=SCLEX_POV SCE_POV_
val SCE_POV_DEFAULT=0
val SCE_POV_COMMENT=1
val SCE_POV_COMMENTLINE=2
val SCE_POV_NUMBER=3
val SCE_POV_OPERATOR=4
val SCE_POV_IDENTIFIER=5
val SCE_POV_STRING=6
val SCE_POV_STRINGEOL=7
val SCE_POV_DIRECTIVE=8
val SCE_POV_BADDIRECTIVE=9
val SCE_POV_WORD2=10
val SCE_POV_WORD3=11
val SCE_POV_WORD4=12
val SCE_POV_WORD5=13
val SCE_POV_WORD6=14
val SCE_POV_WORD7=15
val SCE_POV_WORD8=16
# Lexical states for SCLEX_LOUT
lex LOUT=SCLEX_LOUT SCE_LOUT_
val SCE_LOUT_DEFAULT=0
val SCE_LOUT_COMMENT=1
val SCE_LOUT_NUMBER=2
val SCE_LOUT_WORD=3
val SCE_LOUT_WORD2=4
val SCE_LOUT_WORD3=5
val SCE_LOUT_WORD4=6
val SCE_LOUT_STRING=7
val SCE_LOUT_OPERATOR=8
val SCE_LOUT_IDENTIFIER=9
val SCE_LOUT_STRINGEOL=10
# Lexical states for SCLEX_ESCRIPT
lex ESCRIPT=SCLEX_ESCRIPT SCE_ESCRIPT_
val SCE_ESCRIPT_DEFAULT=0
val SCE_ESCRIPT_COMMENT=1
val SCE_ESCRIPT_COMMENTLINE=2
val SCE_ESCRIPT_COMMENTDOC=3
val SCE_ESCRIPT_NUMBER=4
val SCE_ESCRIPT_WORD=5
val SCE_ESCRIPT_STRING=6
val SCE_ESCRIPT_OPERATOR=7
val SCE_ESCRIPT_IDENTIFIER=8
val SCE_ESCRIPT_BRACE=9
val SCE_ESCRIPT_WORD2=10
val SCE_ESCRIPT_WORD3=11
# Lexical states for SCLEX_PS
lex PS=SCLEX_PS SCE_PS_
val SCE_PS_DEFAULT=0
val SCE_PS_COMMENT=1
val SCE_PS_DSC_COMMENT=2
val SCE_PS_DSC_VALUE=3
val SCE_PS_NUMBER=4
val SCE_PS_NAME=5
val SCE_PS_KEYWORD=6
val SCE_PS_LITERAL=7
val SCE_PS_IMMEVAL=8
val SCE_PS_PAREN_ARRAY=9
val SCE_PS_PAREN_DICT=10
val SCE_PS_PAREN_PROC=11
val SCE_PS_TEXT=12
val SCE_PS_HEXSTRING=13
val SCE_PS_BASE85STRING=14
val SCE_PS_BADSTRINGCHAR=15
# Lexical states for SCLEX_NSIS
lex NSIS=SCLEX_NSIS SCE_NSIS_
val SCE_NSIS_DEFAULT=0
val SCE_NSIS_COMMENT=1
val SCE_NSIS_STRINGDQ=2
val SCE_NSIS_STRINGLQ=3
val SCE_NSIS_STRINGRQ=4
val SCE_NSIS_FUNCTION=5
val SCE_NSIS_VARIABLE=6
val SCE_NSIS_LABEL=7
val SCE_NSIS_USERDEFINED=8
val SCE_NSIS_SECTIONDEF=9
val SCE_NSIS_SUBSECTIONDEF=10
val SCE_NSIS_IFDEFINEDEF=11
val SCE_NSIS_MACRODEF=12
val SCE_NSIS_STRINGVAR=13
val SCE_NSIS_NUMBER=14
val SCE_NSIS_SECTIONGROUP=15
val SCE_NSIS_PAGEEX=16
val SCE_NSIS_FUNCTIONDEF=17
val SCE_NSIS_COMMENTBOX=18
# Lexical states for SCLEX_MMIXAL
lex MMIXAL=SCLEX_MMIXAL SCE_MMIXAL_
val SCE_MMIXAL_LEADWS=0
val SCE_MMIXAL_COMMENT=1
val SCE_MMIXAL_LABEL=2
val SCE_MMIXAL_OPCODE=3
val SCE_MMIXAL_OPCODE_PRE=4
val SCE_MMIXAL_OPCODE_VALID=5
val SCE_MMIXAL_OPCODE_UNKNOWN=6
val SCE_MMIXAL_OPCODE_POST=7
val SCE_MMIXAL_OPERANDS=8
val SCE_MMIXAL_NUMBER=9
val SCE_MMIXAL_REF=10
val SCE_MMIXAL_CHAR=11
val SCE_MMIXAL_STRING=12
val SCE_MMIXAL_REGISTER=13
val SCE_MMIXAL_HEX=14
val SCE_MMIXAL_OPERATOR=15
val SCE_MMIXAL_SYMBOL=16
val SCE_MMIXAL_INCLUDE=17
# Lexical states for SCLEX_CLW
lex Clarion=SCLEX_CLW SCE_CLW_
val SCE_CLW_DEFAULT=0
val SCE_CLW_LABEL=1
val SCE_CLW_COMMENT=2
val SCE_CLW_STRING=3
val SCE_CLW_USER_IDENTIFIER=4
val SCE_CLW_INTEGER_CONSTANT=5
val SCE_CLW_REAL_CONSTANT=6
val SCE_CLW_PICTURE_STRING=7
val SCE_CLW_KEYWORD=8
val SCE_CLW_COMPILER_DIRECTIVE=9
val SCE_CLW_RUNTIME_EXPRESSIONS=10
val SCE_CLW_BUILTIN_PROCEDURES_FUNCTION=11
val SCE_CLW_STRUCTURE_DATA_TYPE=12
val SCE_CLW_ATTRIBUTE=13
val SCE_CLW_STANDARD_EQUATE=14
val SCE_CLW_ERROR=15
val SCE_CLW_DEPRECATED=16
# Lexical states for SCLEX_LOT
lex LOT=SCLEX_LOT SCE_LOT_
val SCE_LOT_DEFAULT=0
val SCE_LOT_HEADER=1
val SCE_LOT_BREAK=2
val SCE_LOT_SET=3
val SCE_LOT_PASS=4
val SCE_LOT_FAIL=5
val SCE_LOT_ABORT=6
# Lexical states for SCLEX_YAML
lex YAML=SCLEX_YAML SCE_YAML_
val SCE_YAML_DEFAULT=0
val SCE_YAML_COMMENT=1
val SCE_YAML_IDENTIFIER=2
val SCE_YAML_KEYWORD=3
val SCE_YAML_NUMBER=4
val SCE_YAML_REFERENCE=5
val SCE_YAML_DOCUMENT=6
val SCE_YAML_TEXT=7
val SCE_YAML_ERROR=8
val SCE_YAML_OPERATOR=9
# Lexical states for SCLEX_TEX
lex TeX=SCLEX_TEX SCE_TEX_
val SCE_TEX_DEFAULT=0
val SCE_TEX_SPECIAL=1
val SCE_TEX_GROUP=2
val SCE_TEX_SYMBOL=3
val SCE_TEX_COMMAND=4
val SCE_TEX_TEXT=5
lex Metapost=SCLEX_METAPOST SCE_METAPOST_
val SCE_METAPOST_DEFAULT=0
val SCE_METAPOST_SPECIAL=1
val SCE_METAPOST_GROUP=2
val SCE_METAPOST_SYMBOL=3
val SCE_METAPOST_COMMAND=4
val SCE_METAPOST_TEXT=5
val SCE_METAPOST_EXTRA=6
# Lexical states for SCLEX_ERLANG
lex Erlang=SCLEX_ERLANG SCE_ERLANG_
val SCE_ERLANG_DEFAULT=0
val SCE_ERLANG_COMMENT=1
val SCE_ERLANG_VARIABLE=2
val SCE_ERLANG_NUMBER=3
val SCE_ERLANG_KEYWORD=4
val SCE_ERLANG_STRING=5
val SCE_ERLANG_OPERATOR=6
val SCE_ERLANG_ATOM=7
val SCE_ERLANG_FUNCTION_NAME=8
val SCE_ERLANG_CHARACTER=9
val SCE_ERLANG_MACRO=10
val SCE_ERLANG_RECORD=11
val SCE_ERLANG_PREPROC=12
val SCE_ERLANG_NODE_NAME=13
val SCE_ERLANG_COMMENT_FUNCTION=14
val SCE_ERLANG_COMMENT_MODULE=15
val SCE_ERLANG_COMMENT_DOC=16
val SCE_ERLANG_COMMENT_DOC_MACRO=17
val SCE_ERLANG_ATOM_QUOTED=18
val SCE_ERLANG_MACRO_QUOTED=19
val SCE_ERLANG_RECORD_QUOTED=20
val SCE_ERLANG_NODE_NAME_QUOTED=21
val SCE_ERLANG_BIFS=22
val SCE_ERLANG_MODULES=23
val SCE_ERLANG_MODULES_ATT=24
val SCE_ERLANG_UNKNOWN=31
# Lexical states for SCLEX_OCTAVE are identical to MatLab
lex Octave=SCLEX_OCTAVE SCE_MATLAB_
# Lexical states for SCLEX_MSSQL
lex MSSQL=SCLEX_MSSQL SCE_MSSQL_
val SCE_MSSQL_DEFAULT=0
val SCE_MSSQL_COMMENT=1
val SCE_MSSQL_LINE_COMMENT=2
val SCE_MSSQL_NUMBER=3
val SCE_MSSQL_STRING=4
val SCE_MSSQL_OPERATOR=5
val SCE_MSSQL_IDENTIFIER=6
val SCE_MSSQL_VARIABLE=7
val SCE_MSSQL_COLUMN_NAME=8
val SCE_MSSQL_STATEMENT=9
val SCE_MSSQL_DATATYPE=10
val SCE_MSSQL_SYSTABLE=11
val SCE_MSSQL_GLOBAL_VARIABLE=12
val SCE_MSSQL_FUNCTION=13
val SCE_MSSQL_STORED_PROCEDURE=14
val SCE_MSSQL_DEFAULT_PREF_DATATYPE=15
val SCE_MSSQL_COLUMN_NAME_2=16
# Lexical states for SCLEX_VERILOG
lex Verilog=SCLEX_VERILOG SCE_V_
val SCE_V_DEFAULT=0
val SCE_V_COMMENT=1
val SCE_V_COMMENTLINE=2
val SCE_V_COMMENTLINEBANG=3
val SCE_V_NUMBER=4
val SCE_V_WORD=5
val SCE_V_STRING=6
val SCE_V_WORD2=7
val SCE_V_WORD3=8
val SCE_V_PREPROCESSOR=9
val SCE_V_OPERATOR=10
val SCE_V_IDENTIFIER=11
val SCE_V_STRINGEOL=12
val SCE_V_USER=19
# Lexical states for SCLEX_KIX
lex Kix=SCLEX_KIX SCE_KIX_
val SCE_KIX_DEFAULT=0
val SCE_KIX_COMMENT=1
val SCE_KIX_STRING1=2
val SCE_KIX_STRING2=3
val SCE_KIX_NUMBER=4
val SCE_KIX_VAR=5
val SCE_KIX_MACRO=6
val SCE_KIX_KEYWORD=7
val SCE_KIX_FUNCTIONS=8
val SCE_KIX_OPERATOR=9
val SCE_KIX_IDENTIFIER=31
# Lexical states for SCLEX_GUI4CLI
val SCE_GC_DEFAULT=0
val SCE_GC_COMMENTLINE=1
val SCE_GC_COMMENTBLOCK=2
val SCE_GC_GLOBAL=3
val SCE_GC_EVENT=4
val SCE_GC_ATTRIBUTE=5
val SCE_GC_CONTROL=6
val SCE_GC_COMMAND=7
val SCE_GC_STRING=8
val SCE_GC_OPERATOR=9
# Lexical states for SCLEX_SPECMAN
lex Specman=SCLEX_SPECMAN SCE_SN_
val SCE_SN_DEFAULT=0
val SCE_SN_CODE=1
val SCE_SN_COMMENTLINE=2
val SCE_SN_COMMENTLINEBANG=3
val SCE_SN_NUMBER=4
val SCE_SN_WORD=5
val SCE_SN_STRING=6
val SCE_SN_WORD2=7
val SCE_SN_WORD3=8
val SCE_SN_PREPROCESSOR=9
val SCE_SN_OPERATOR=10
val SCE_SN_IDENTIFIER=11
val SCE_SN_STRINGEOL=12
val SCE_SN_REGEXTAG=13
val SCE_SN_SIGNAL=14
val SCE_SN_USER=19
# Lexical states for SCLEX_AU3
lex Au3=SCLEX_AU3 SCE_AU3_
val SCE_AU3_DEFAULT=0
val SCE_AU3_COMMENT=1
val SCE_AU3_COMMENTBLOCK=2
val SCE_AU3_NUMBER=3
val SCE_AU3_FUNCTION=4
val SCE_AU3_KEYWORD=5
val SCE_AU3_MACRO=6
val SCE_AU3_STRING=7
val SCE_AU3_OPERATOR=8
val SCE_AU3_VARIABLE=9
val SCE_AU3_SENT=10
val SCE_AU3_PREPROCESSOR=11
val SCE_AU3_SPECIAL=12
val SCE_AU3_EXPAND=13
val SCE_AU3_COMOBJ=14
val SCE_AU3_UDF=15
# Lexical states for SCLEX_APDL
lex APDL=SCLEX_APDL SCE_APDL_
val SCE_APDL_DEFAULT=0
val SCE_APDL_COMMENT=1
val SCE_APDL_COMMENTBLOCK=2
val SCE_APDL_NUMBER=3
val SCE_APDL_STRING=4
val SCE_APDL_OPERATOR=5
val SCE_APDL_WORD=6
val SCE_APDL_PROCESSOR=7
val SCE_APDL_COMMAND=8
val SCE_APDL_SLASHCOMMAND=9
val SCE_APDL_STARCOMMAND=10
val SCE_APDL_ARGUMENT=11
val SCE_APDL_FUNCTION=12
# Lexical states for SCLEX_BASH
lex Bash=SCLEX_BASH SCE_SH_
val SCE_SH_DEFAULT=0
val SCE_SH_ERROR=1
val SCE_SH_COMMENTLINE=2
val SCE_SH_NUMBER=3
val SCE_SH_WORD=4
val SCE_SH_STRING=5
val SCE_SH_CHARACTER=6
val SCE_SH_OPERATOR=7
val SCE_SH_IDENTIFIER=8
val SCE_SH_SCALAR=9
val SCE_SH_PARAM=10
val SCE_SH_BACKTICKS=11
val SCE_SH_HERE_DELIM=12
val SCE_SH_HERE_Q=13
# Lexical states for SCLEX_ASN1
lex Asn1=SCLEX_ASN1 SCE_ASN1_
val SCE_ASN1_DEFAULT=0
val SCE_ASN1_COMMENT=1
val SCE_ASN1_IDENTIFIER=2
val SCE_ASN1_STRING=3
val SCE_ASN1_OID=4
val SCE_ASN1_SCALAR=5
val SCE_ASN1_KEYWORD=6
val SCE_ASN1_ATTRIBUTE=7
val SCE_ASN1_DESCRIPTOR=8
val SCE_ASN1_TYPE=9
val SCE_ASN1_OPERATOR=10
# Lexical states for SCLEX_VHDL
lex VHDL=SCLEX_VHDL SCE_VHDL_
val SCE_VHDL_DEFAULT=0
val SCE_VHDL_COMMENT=1
val SCE_VHDL_COMMENTLINEBANG=2
val SCE_VHDL_NUMBER=3
val SCE_VHDL_STRING=4
val SCE_VHDL_OPERATOR=5
val SCE_VHDL_IDENTIFIER=6
val SCE_VHDL_STRINGEOL=7
val SCE_VHDL_KEYWORD=8
val SCE_VHDL_STDOPERATOR=9
val SCE_VHDL_ATTRIBUTE=10
val SCE_VHDL_STDFUNCTION=11
val SCE_VHDL_STDPACKAGE=12
val SCE_VHDL_STDTYPE=13
val SCE_VHDL_USERWORD=14
# Lexical states for SCLEX_CAML
lex Caml=SCLEX_CAML SCE_CAML_
val SCE_CAML_DEFAULT=0
val SCE_CAML_IDENTIFIER=1
val SCE_CAML_TAGNAME=2
val SCE_CAML_KEYWORD=3
val SCE_CAML_KEYWORD2=4
val SCE_CAML_KEYWORD3=5
val SCE_CAML_LINENUM=6
val SCE_CAML_OPERATOR=7
val SCE_CAML_NUMBER=8
val SCE_CAML_CHAR=9
val SCE_CAML_WHITE=10
val SCE_CAML_STRING=11
val SCE_CAML_COMMENT=12
val SCE_CAML_COMMENT1=13
val SCE_CAML_COMMENT2=14
val SCE_CAML_COMMENT3=15
# Lexical states for SCLEX_HASKELL
lex Haskell=SCLEX_HASKELL SCE_HA_
val SCE_HA_DEFAULT=0
val SCE_HA_IDENTIFIER=1
val SCE_HA_KEYWORD=2
val SCE_HA_NUMBER=3
val SCE_HA_STRING=4
val SCE_HA_CHARACTER=5
val SCE_HA_CLASS=6
val SCE_HA_MODULE=7
val SCE_HA_CAPITAL=8
val SCE_HA_DATA=9
val SCE_HA_IMPORT=10
val SCE_HA_OPERATOR=11
val SCE_HA_INSTANCE=12
val SCE_HA_COMMENTLINE=13
val SCE_HA_COMMENTBLOCK=14
val SCE_HA_COMMENTBLOCK2=15
val SCE_HA_COMMENTBLOCK3=16
# Lexical states of SCLEX_TADS3
lex TADS3=SCLEX_TADS3 SCE_T3_
val SCE_T3_DEFAULT=0
val SCE_T3_X_DEFAULT=1
val SCE_T3_PREPROCESSOR=2
val SCE_T3_BLOCK_COMMENT=3
val SCE_T3_LINE_COMMENT=4
val SCE_T3_OPERATOR=5
val SCE_T3_KEYWORD=6
val SCE_T3_NUMBER=7
val SCE_T3_IDENTIFIER=8
val SCE_T3_S_STRING=9
val SCE_T3_D_STRING=10
val SCE_T3_X_STRING=11
val SCE_T3_LIB_DIRECTIVE=12
val SCE_T3_MSG_PARAM=13
val SCE_T3_HTML_TAG=14
val SCE_T3_HTML_DEFAULT=15
val SCE_T3_HTML_STRING=16
val SCE_T3_USER1=17
val SCE_T3_USER2=18
val SCE_T3_USER3=19
val SCE_T3_BRACE=20
# Lexical states for SCLEX_REBOL
lex Rebol=SCLEX_REBOL SCE_REBOL_
val SCE_REBOL_DEFAULT=0
val SCE_REBOL_COMMENTLINE=1
val SCE_REBOL_COMMENTBLOCK=2
val SCE_REBOL_PREFACE=3
val SCE_REBOL_OPERATOR=4
val SCE_REBOL_CHARACTER=5
val SCE_REBOL_QUOTEDSTRING=6
val SCE_REBOL_BRACEDSTRING=7
val SCE_REBOL_NUMBER=8
val SCE_REBOL_PAIR=9
val SCE_REBOL_TUPLE=10
val SCE_REBOL_BINARY=11
val SCE_REBOL_MONEY=12
val SCE_REBOL_ISSUE=13
val SCE_REBOL_TAG=14
val SCE_REBOL_FILE=15
val SCE_REBOL_EMAIL=16
val SCE_REBOL_URL=17
val SCE_REBOL_DATE=18
val SCE_REBOL_TIME=19
val SCE_REBOL_IDENTIFIER=20
val SCE_REBOL_WORD=21
val SCE_REBOL_WORD2=22
val SCE_REBOL_WORD3=23
val SCE_REBOL_WORD4=24
val SCE_REBOL_WORD5=25
val SCE_REBOL_WORD6=26
val SCE_REBOL_WORD7=27
val SCE_REBOL_WORD8=28
# Lexical states for SCLEX_SQL
lex SQL=SCLEX_SQL SCE_SQL_
val SCE_SQL_DEFAULT=0
val SCE_SQL_COMMENT=1
val SCE_SQL_COMMENTLINE=2
val SCE_SQL_COMMENTDOC=3
val SCE_SQL_NUMBER=4
val SCE_SQL_WORD=5
val SCE_SQL_STRING=6
val SCE_SQL_CHARACTER=7
val SCE_SQL_SQLPLUS=8
val SCE_SQL_SQLPLUS_PROMPT=9
val SCE_SQL_OPERATOR=10
val SCE_SQL_IDENTIFIER=11
val SCE_SQL_SQLPLUS_COMMENT=13
val SCE_SQL_COMMENTLINEDOC=15
val SCE_SQL_WORD2=16
val SCE_SQL_COMMENTDOCKEYWORD=17
val SCE_SQL_COMMENTDOCKEYWORDERROR=18
val SCE_SQL_USER1=19
val SCE_SQL_USER2=20
val SCE_SQL_USER3=21
val SCE_SQL_USER4=22
val SCE_SQL_QUOTEDIDENTIFIER=23
# Lexical states for SCLEX_SMALLTALK
lex Smalltalk=SCLEX_SMALLTALK SCE_ST_
val SCE_ST_DEFAULT=0
val SCE_ST_STRING=1
val SCE_ST_NUMBER=2
val SCE_ST_COMMENT=3
val SCE_ST_SYMBOL=4
val SCE_ST_BINARY=5
val SCE_ST_BOOL=6
val SCE_ST_SELF=7
val SCE_ST_SUPER=8
val SCE_ST_NIL=9
val SCE_ST_GLOBAL=10
val SCE_ST_RETURN=11
val SCE_ST_SPECIAL=12
val SCE_ST_KWSEND=13
val SCE_ST_ASSIGN=14
val SCE_ST_CHARACTER=15
val SCE_ST_SPEC_SEL=16
# Lexical states for SCLEX_FLAGSHIP (clipper)
lex FlagShip=SCLEX_FLAGSHIP SCE_B_
val SCE_FS_DEFAULT=0
val SCE_FS_COMMENT=1
val SCE_FS_COMMENTLINE=2
val SCE_FS_COMMENTDOC=3
val SCE_FS_COMMENTLINEDOC=4
val SCE_FS_COMMENTDOCKEYWORD=5
val SCE_FS_COMMENTDOCKEYWORDERROR=6
val SCE_FS_KEYWORD=7
val SCE_FS_KEYWORD2=8
val SCE_FS_KEYWORD3=9
val SCE_FS_KEYWORD4=10
val SCE_FS_NUMBER=11
val SCE_FS_STRING=12
val SCE_FS_PREPROCESSOR=13
val SCE_FS_OPERATOR=14
val SCE_FS_IDENTIFIER=15
val SCE_FS_DATE=16
val SCE_FS_STRINGEOL=17
val SCE_FS_CONSTANT=18
val SCE_FS_ASM=19
val SCE_FS_LABEL=20
val SCE_FS_ERROR=21
val SCE_FS_HEXNUMBER=22
val SCE_FS_BINNUMBER=23
# Lexical states for SCLEX_CSOUND
lex Csound=SCLEX_CSOUND SCE_CSOUND_
val SCE_CSOUND_DEFAULT=0
val SCE_CSOUND_COMMENT=1
val SCE_CSOUND_NUMBER=2
val SCE_CSOUND_OPERATOR=3
val SCE_CSOUND_INSTR=4
val SCE_CSOUND_IDENTIFIER=5
val SCE_CSOUND_OPCODE=6
val SCE_CSOUND_HEADERSTMT=7
val SCE_CSOUND_USERKEYWORD=8
val SCE_CSOUND_COMMENTBLOCK=9
val SCE_CSOUND_PARAM=10
val SCE_CSOUND_ARATE_VAR=11
val SCE_CSOUND_KRATE_VAR=12
val SCE_CSOUND_IRATE_VAR=13
val SCE_CSOUND_GLOBAL_VAR=14
val SCE_CSOUND_STRINGEOL=15
# Lexical states for SCLEX_INNOSETUP
lex Inno=SCLEX_INNOSETUP SCE_INNO_
val SCE_INNO_DEFAULT=0
val SCE_INNO_COMMENT=1
val SCE_INNO_KEYWORD=2
val SCE_INNO_PARAMETER=3
val SCE_INNO_SECTION=4
val SCE_INNO_PREPROC=5
val SCE_INNO_INLINE_EXPANSION=6
val SCE_INNO_COMMENT_PASCAL=7
val SCE_INNO_KEYWORD_PASCAL=8
val SCE_INNO_KEYWORD_USER=9
val SCE_INNO_STRING_DOUBLE=10
val SCE_INNO_STRING_SINGLE=11
val SCE_INNO_IDENTIFIER=12
# Lexical states for SCLEX_OPAL
lex Opal=SCLEX_OPAL SCE_OPAL_
val SCE_OPAL_SPACE=0
val SCE_OPAL_COMMENT_BLOCK=1
val SCE_OPAL_COMMENT_LINE=2
val SCE_OPAL_INTEGER=3
val SCE_OPAL_KEYWORD=4
val SCE_OPAL_SORT=5
val SCE_OPAL_STRING=6
val SCE_OPAL_PAR=7
val SCE_OPAL_BOOL_CONST=8
val SCE_OPAL_DEFAULT=32
# Lexical states for SCLEX_SPICE
lex Spice=SCLEX_SPICE SCE_SPICE_
val SCE_SPICE_DEFAULT=0
val SCE_SPICE_IDENTIFIER=1
val SCE_SPICE_KEYWORD=2
val SCE_SPICE_KEYWORD2=3
val SCE_SPICE_KEYWORD3=4
val SCE_SPICE_NUMBER=5
val SCE_SPICE_DELIMITER=6
val SCE_SPICE_VALUE=7
val SCE_SPICE_COMMENTLINE=8
# Lexical states for SCLEX_CMAKE
lex CMAKE=SCLEX_CMAKE SCE_CMAKE_
val SCE_CMAKE_DEFAULT=0
val SCE_CMAKE_COMMENT=1
val SCE_CMAKE_STRINGDQ=2
val SCE_CMAKE_STRINGLQ=3
val SCE_CMAKE_STRINGRQ=4
val SCE_CMAKE_COMMANDS=5
val SCE_CMAKE_PARAMETERS=6
val SCE_CMAKE_VARIABLE=7
val SCE_CMAKE_USERDEFINED=8
val SCE_CMAKE_WHILEDEF=9
val SCE_CMAKE_FOREACHDEF=10
val SCE_CMAKE_IFDEFINEDEF=11
val SCE_CMAKE_MACRODEF=12
val SCE_CMAKE_STRINGVAR=13
val SCE_CMAKE_NUMBER=14
# Lexical states for SCLEX_GAP
lex Gap=SCLEX_GAP SCE_GAP_
val SCE_GAP_DEFAULT=0
val SCE_GAP_IDENTIFIER=1
val SCE_GAP_KEYWORD=2
val SCE_GAP_KEYWORD2=3
val SCE_GAP_KEYWORD3=4
val SCE_GAP_KEYWORD4=5
val SCE_GAP_STRING=6
val SCE_GAP_CHAR=7
val SCE_GAP_OPERATOR=8
val SCE_GAP_COMMENT=9
val SCE_GAP_NUMBER=10
val SCE_GAP_STRINGEOL=11
# Lexical state for SCLEX_PLM
lex PLM=SCLEX_PLM SCE_PLM_
val SCE_PLM_DEFAULT=0
val SCE_PLM_COMMENT=1
val SCE_PLM_STRING=2
val SCE_PLM_NUMBER=3
val SCE_PLM_IDENTIFIER=4
val SCE_PLM_OPERATOR=5
val SCE_PLM_CONTROL=6
val SCE_PLM_KEYWORD=7
# Lexical state for SCLEX_PROGRESS
lex Progress=SCLEX_PROGRESS SCE_4GL_
val SCE_4GL_DEFAULT=0
val SCE_4GL_NUMBER=1
val SCE_4GL_WORD=2
val SCE_4GL_STRING=3
val SCE_4GL_CHARACTER=4
val SCE_4GL_PREPROCESSOR=5
val SCE_4GL_OPERATOR=6
val SCE_4GL_IDENTIFIER=7
val SCE_4GL_BLOCK=8
val SCE_4GL_END=9
val SCE_4GL_COMMENT1=10
val SCE_4GL_COMMENT2=11
val SCE_4GL_COMMENT3=12
val SCE_4GL_COMMENT4=13
val SCE_4GL_COMMENT5=14
val SCE_4GL_COMMENT6=15
val SCE_4GL_DEFAULT_=16
val SCE_4GL_NUMBER_=17
val SCE_4GL_WORD_=18
val SCE_4GL_STRING_=19
val SCE_4GL_CHARACTER_=20
val SCE_4GL_PREPROCESSOR_=21
val SCE_4GL_OPERATOR_=22
val SCE_4GL_IDENTIFIER_=23
val SCE_4GL_BLOCK_=24
val SCE_4GL_END_=25
val SCE_4GL_COMMENT1_=26
val SCE_4GL_COMMENT2_=27
val SCE_4GL_COMMENT3_=28
val SCE_4GL_COMMENT4_=29
val SCE_4GL_COMMENT5_=30
val SCE_4GL_COMMENT6_=31
# Lexical states for SCLEX_ABAQUS
lex ABAQUS=SCLEX_ABAQUS SCE_ABAQUS_
val SCE_ABAQUS_DEFAULT=0
val SCE_ABAQUS_COMMENT=1
val SCE_ABAQUS_COMMENTBLOCK=2
val SCE_ABAQUS_NUMBER=3
val SCE_ABAQUS_STRING=4
val SCE_ABAQUS_OPERATOR=5
val SCE_ABAQUS_WORD=6
val SCE_ABAQUS_PROCESSOR=7
val SCE_ABAQUS_COMMAND=8
val SCE_ABAQUS_SLASHCOMMAND=9
val SCE_ABAQUS_STARCOMMAND=10
val SCE_ABAQUS_ARGUMENT=11
val SCE_ABAQUS_FUNCTION=12
# Lexical states for SCLEX_ASYMPTOTE
lex Asymptote=SCLEX_ASYMPTOTE SCE_ASY_
val SCE_ASY_DEFAULT=0
val SCE_ASY_COMMENT=1
val SCE_ASY_COMMENTLINE=2
val SCE_ASY_NUMBER=3
val SCE_ASY_WORD=4
val SCE_ASY_STRING=5
val SCE_ASY_CHARACTER=6
val SCE_ASY_OPERATOR=7
val SCE_ASY_IDENTIFIER=8
val SCE_ASY_STRINGEOL=9
val SCE_ASY_COMMENTLINEDOC=10
val SCE_ASY_WORD2=11
# Lexical states for SCLEX_R
lex R=SCLEX_R SCE_R_
val SCE_R_DEFAULT=0
val SCE_R_COMMENT=1
val SCE_R_KWORD=2
val SCE_R_BASEKWORD=3
val SCE_R_OTHERKWORD=4
val SCE_R_NUMBER=5
val SCE_R_STRING=6
val SCE_R_STRING2=7
val SCE_R_OPERATOR=8
val SCE_R_IDENTIFIER=9
val SCE_R_INFIX=10
val SCE_R_INFIXEOL=11
# Lexical state for SCLEX_MAGIKSF
lex MagikSF=SCLEX_MAGIKSF SCE_MAGIK_
val SCE_MAGIK_DEFAULT=0
val SCE_MAGIK_COMMENT=1
val SCE_MAGIK_HYPER_COMMENT=16
val SCE_MAGIK_STRING=2
val SCE_MAGIK_CHARACTER=3
val SCE_MAGIK_NUMBER=4
val SCE_MAGIK_IDENTIFIER=5
val SCE_MAGIK_OPERATOR=6
val SCE_MAGIK_FLOW=7
val SCE_MAGIK_CONTAINER=8
val SCE_MAGIK_BRACKET_BLOCK=9
val SCE_MAGIK_BRACE_BLOCK=10
val SCE_MAGIK_SQBRACKET_BLOCK=11
val SCE_MAGIK_UNKNOWN_KEYWORD=12
val SCE_MAGIK_KEYWORD=13
val SCE_MAGIK_PRAGMA=14
val SCE_MAGIK_SYMBOL=15
# Lexical state for SCLEX_POWERSHELL
lex PowerShell=SCLEX_POWERSHELL SCE_POWERSHELL_
val SCE_POWERSHELL_DEFAULT=0
val SCE_POWERSHELL_COMMENT=1
val SCE_POWERSHELL_STRING=2
val SCE_POWERSHELL_CHARACTER=3
val SCE_POWERSHELL_NUMBER=4
val SCE_POWERSHELL_VARIABLE=5
val SCE_POWERSHELL_OPERATOR=6
val SCE_POWERSHELL_IDENTIFIER=7
val SCE_POWERSHELL_KEYWORD=8
val SCE_POWERSHELL_CMDLET=9
val SCE_POWERSHELL_ALIAS=10
# Lexical state for SCLEX_MYSQL
lex MySQL=SCLEX_MYSQL SCE_MYSQL_
val SCE_MYSQL_DEFAULT=0
val SCE_MYSQL_COMMENT=1
val SCE_MYSQL_COMMENTLINE=2
val SCE_MYSQL_VARIABLE=3
val SCE_MYSQL_SYSTEMVARIABLE=4
val SCE_MYSQL_KNOWNSYSTEMVARIABLE=5
val SCE_MYSQL_NUMBER=6
val SCE_MYSQL_MAJORKEYWORD=7
val SCE_MYSQL_KEYWORD=8
val SCE_MYSQL_DATABASEOBJECT=9
val SCE_MYSQL_PROCEDUREKEYWORD=10
val SCE_MYSQL_STRING=11
val SCE_MYSQL_SQSTRING=12
val SCE_MYSQL_DQSTRING=13
val SCE_MYSQL_OPERATOR=14
val SCE_MYSQL_FUNCTION=15
val SCE_MYSQL_IDENTIFIER=16
val SCE_MYSQL_QUOTEDIDENTIFIER=17
val SCE_MYSQL_USER1=18
val SCE_MYSQL_USER2=19
val SCE_MYSQL_USER3=20
val SCE_MYSQL_HIDDENCOMMAND=21
# Lexical state for SCLEX_PO
lex Po=SCLEX_PO SCE_PO_
val SCE_PO_DEFAULT=0
val SCE_PO_COMMENT=1
val SCE_PO_MSGID=2
val SCE_PO_MSGID_TEXT=3
val SCE_PO_MSGSTR=4
val SCE_PO_MSGSTR_TEXT=5
val SCE_PO_MSGCTXT=6
val SCE_PO_MSGCTXT_TEXT=7
val SCE_PO_FUZZY=8
# Lexical states for SCLEX_PASCAL
lex Pascal=SCLEX_PASCAL SCE_PAS_
val SCE_PAS_DEFAULT=0
val SCE_PAS_IDENTIFIER=1
val SCE_PAS_COMMENT=2
val SCE_PAS_COMMENT2=3
val SCE_PAS_COMMENTLINE=4
val SCE_PAS_PREPROCESSOR=5
val SCE_PAS_PREPROCESSOR2=6
val SCE_PAS_NUMBER=7
val SCE_PAS_HEXNUMBER=8
val SCE_PAS_WORD=9
val SCE_PAS_STRING=10
val SCE_PAS_STRINGEOL=11
val SCE_PAS_CHARACTER=12
val SCE_PAS_OPERATOR=13
val SCE_PAS_ASM=14
# Lexical state for SCLEX_SORCUS
lex SORCUS=SCLEX_SORCUS SCE_SORCUS_
val SCE_SORCUS_DEFAULT=0
val SCE_SORCUS_COMMAND=1
val SCE_SORCUS_PARAMETER=2
val SCE_SORCUS_COMMENTLINE=3
val SCE_SORCUS_STRING=4
val SCE_SORCUS_STRINGEOL=5
val SCE_SORCUS_IDENTIFIER=6
val SCE_SORCUS_OPERATOR=7
val SCE_SORCUS_NUMBER=8
val SCE_SORCUS_CONSTANT=9
# Lexical state for SCLEX_POWERPRO
lex PowerPro=SCLEX_POWERPRO SCE_POWERPRO_
val SCE_POWERPRO_DEFAULT=0
val SCE_POWERPRO_COMMENTBLOCK=1
val SCE_POWERPRO_COMMENTLINE=2
val SCE_POWERPRO_NUMBER=3
val SCE_POWERPRO_WORD=4
val SCE_POWERPRO_WORD2=5
val SCE_POWERPRO_WORD3=6
val SCE_POWERPRO_WORD4=7
val SCE_POWERPRO_DOUBLEQUOTEDSTRING=8
val SCE_POWERPRO_SINGLEQUOTEDSTRING=9
val SCE_POWERPRO_LINECONTINUE=10
val SCE_POWERPRO_OPERATOR=11
val SCE_POWERPRO_IDENTIFIER=12
val SCE_POWERPRO_STRINGEOL=13
val SCE_POWERPRO_VERBATIM=14
val SCE_POWERPRO_ALTQUOTE=15
val SCE_POWERPRO_FUNCTION=16
# Lexical states for SCLEX_SML
lex SML=SCLEX_SML SCE_SML_
val SCE_SML_DEFAULT=0
val SCE_SML_IDENTIFIER=1
val SCE_SML_TAGNAME=2
val SCE_SML_KEYWORD=3
val SCE_SML_KEYWORD2=4
val SCE_SML_KEYWORD3=5
val SCE_SML_LINENUM=6
val SCE_SML_OPERATOR=7
val SCE_SML_NUMBER=8
val SCE_SML_CHAR=9
val SCE_SML_STRING=11
val SCE_SML_COMMENT=12
val SCE_SML_COMMENT1=13
val SCE_SML_COMMENT2=14
val SCE_SML_COMMENT3=15
# Lexical state for SCLEX_MARKDOWN
lex Markdown=SCLEX_MARKDOWN SCE_MARKDOWN_
val SCE_MARKDOWN_DEFAULT=0
val SCE_MARKDOWN_LINE_BEGIN=1
val SCE_MARKDOWN_STRONG1=2
val SCE_MARKDOWN_STRONG2=3
val SCE_MARKDOWN_EM1=4
val SCE_MARKDOWN_EM2=5
val SCE_MARKDOWN_HEADER1=6
val SCE_MARKDOWN_HEADER2=7
val SCE_MARKDOWN_HEADER3=8
val SCE_MARKDOWN_HEADER4=9
val SCE_MARKDOWN_HEADER5=10
val SCE_MARKDOWN_HEADER6=11
val SCE_MARKDOWN_PRECHAR=12
val SCE_MARKDOWN_ULIST_ITEM=13
val SCE_MARKDOWN_OLIST_ITEM=14
val SCE_MARKDOWN_BLOCKQUOTE=15
val SCE_MARKDOWN_STRIKEOUT=16
val SCE_MARKDOWN_HRULE=17
val SCE_MARKDOWN_LINK=18
val SCE_MARKDOWN_CODE=19
val SCE_MARKDOWN_CODE2=20
val SCE_MARKDOWN_CODEBK=21

# Events

evt void StyleNeeded=2000(int position)
evt void CharAdded=2001(int ch)
evt void SavePointReached=2002(void)
evt void SavePointLeft=2003(void)
evt void ModifyAttemptRO=2004(void)
# GTK+ Specific to work around focus and accelerator problems:
evt void Key=2005(int ch, int modifiers)
evt void DoubleClick=2006(void)
evt void UpdateUI=2007(void)
evt void Modified=2008(int position, int modificationType, string text, int length, int linesAdded, int line, int foldLevelNow, int foldLevelPrev)
evt void MacroRecord=2009(int message, int wParam, int lParam)
evt void MarginClick=2010(int modifiers, int position, int margin)
evt void NeedShown=2011(int position, int length)
evt void Painted=2013(void)
evt void UserListSelection=2014(int listType, string text)
evt void URIDropped=2015(string text)
evt void DwellStart=2016(int position)
evt void DwellEnd=2017(int position)
evt void Zoom=2018(void)
evt void HotSpotClick=2019(int modifiers, int position)
evt void HotSpotDoubleClick=2020(int modifiers, int position)
evt void CallTipClick=2021(int position)
evt void AutoCSelection=2022(string text)
evt void IndicatorClick=2023(int modifiers, int position)
evt void IndicatorRelease=2024(int modifiers, int position)
evt void AutoCCancelled=2025(void)
evt void AutoCCharDeleted=2026(void)