wxPython/distrib/wxPythonFull.spec.in

   1 #----------------------------------------------------------------------
   2 # Name:        wxPython.spec
   3 # Purpose:     RPM Build and packaging instructions
   4 #
   5 # Author:      Robin Dunn
   6 #
   7 # RCS-ID:      $Id$
   8 # Copyright:   (c) 2004 by Total Control Software
   9 # Licence:     wxWindows license
  10 #----------------------------------------------------------------------
  11
  12
  13 # The following values can be set on the rpmbuild command line with
  14 # --define 'name VALUE'  If no value is set on the command line then
  15 # the default value set here will be used instead.
  16
  17
  18 # Which version of Python to build with.  Used to assemble python
  19 # binary name so use '2.2', '2.3', etc.
  20 %if %{?pyver:0}%{!?pyver:1}
  21 %define pyver 2.3
  22 %endif
  23
  24
  25 # Which wxWidgets port to build and use.  Current acceptable values
  26 # are 'gtk' and 'gtk2'.
  27 %if %{?port:0}%{!?port:1}
  28 %define port gtk2
  29 %endif
  30
  31
  32 # Build in unicode mode?  Can only be used if port is gtk2, acceptable
  33 # values are '0' and '1'
  34 %if %{?unicode:0}%{!?unicode:1}
  35 %define unicode 1
  36 %endif
  37
  38
  39 # Should the builtin image and etc. libs be used, or system libs?
  40 # Distro specific RPMs should probably set this to 0, generic ones
  41 # should use 1.
  42 # NOTE: I'm trying 0 for this next release to see if I can get rid of
  43 # this...
  44 %if %{?builtin_libs:0}%{!?builtin_libs:1}
  45 %define builtin_libs 0
  46 %endif
  47
  48
  49 # Should --enable-debug_flag be used in release builds?  Using it
  50 # defines __WXDEBUG__ and gives us runtime diagnostics that are turned
  51 # into Python exceptions.  (So turning it on is a very helpful thing
  52 # IMO and is recommended.)  The code is still compiled with
  53 # optimization flags and and without debug info and such when this
  54 # option is used, it simply turns on some extra code.
  55 %if %{?debug_flag:0}%{!?debug_flag:1}
  56 %define debug_flag 1
  57 %endif
  58
  59
  60 # Used to set the Release tag below.  I normally use it to define what
  61 # distro the RPM was build on and also include the version of Python
  62 # it was built with.
  63 %if %{?release:0}%{!?release:1}
  64 %define release 1_py%{pyver}
  65 %endif
  66
  67
  68
  69 #----------------------------------------------------------------------
  70 # Other variables used below
  71
  72 %define pref       %{_prefix}
  73 %define python     /usr/bin/python%{pyver}
  74 %define tarname    @TARNAME@
  75 %define version    @VERSION@
  76 %define ver2       @VER2@
  77
  78 %define chartype   %(if [ "%{unicode}" = "1" ]; then echo unicode; else echo ansi; fi)
  79 %define gtktype    %(if [ "%{port}" = "gtk2" ]; then echo 2; fi)
  80 %define using_gtk1 %(if [ "%{port}" = "gtk" ]; then echo 1; else echo 0; fi)
  81
  82 %define wxprefbase %{pref}/lib/wxPython
  83 %define wxpref     %{wxprefbase}-%{version}-%{port}-%{chartype}
  84 %define pkgname    wxPython
  85
  86 # turn off the generation of debuginfo rpm  (RH9) ??
  87 %define debug_package %{nil}
  88
  89
  90 #----------------------------------------------------------------------
  91 # Package definition
  92 #----------------------------------------------------------------------
  93 Name:      %{pkgname}%{ver2}
  94 Summary:   Cross platform GUI toolkit for Python
  95 Version:   %{version}
  96 Release:   %{release}
  97 Source0:   %{tarname}-%{version}.tar.gz
  98 License:   wx Library Licence, Version 3
  99 URL:       http://wxPython.org/
 100 Packager:  Robin Dunn <robin@alldunn.com>
 101 Group:     Development/Python
 102 BuildRoot: %{_tmppath}/%{pkgname}-buildroot
 103 Prefix:    %{pref}
 104
 105 %description
 106 Cross platform GUI toolkit for Python
 107
 108
 109
 110
 111 %package -n %{pkgname}%{ver2}-%{port}-%{chartype}
 112 Summary:   Cross platform GUI toolkit for Python
 113 Group:     Development/Python
 114 Requires:  %{pkgname}-common
 115 Obsoletes: wxPythonGTK%{gtktype}-py%{pyver}
 116 Provides:  wxPython
 117
 118
 119 %description -n %{pkgname}%{ver2}-%{port}-%{chartype}
 120 wxPython is a GUI toolkit for the Python programming language. It
 121  allows Python programmers to create programs with a robust, highly
 122 functional graphical user interface, simply and easily. It is
 123 implemented as a Python extension module (native code) that wraps the
 124 popular wxWidgets cross platform GUI library, which is written in C++.
 125
 126 wxPython is a cross-platform toolkit. The same program will usually
 127 run on multiple platforms without modification. Currently supported
 128 platforms are 32-bit Microsoft Windows, most Unix or unix-like
 129 systems, and Macintosh OS X.
 130
 131 This package contains the wxPython runtime files built for the
 132 wxWidgets %{port} port with %{chartype} character type.
 133
 134
 135
 136
 137
 138 %package -n %{pkgname}-common-%{port}-%{chartype}
 139 Summary: Common files for needed by all wxPython runtimes
 140 Group: Development/Python
 141 Provides: %{pkgname}-common
 142
 143 # They obsolete each other so any of them can be installed over another
 144 # without conflicts
 145 Obsoletes: %{pkgname}-common-gtk-ansi
 146 Obsoletes: %{pkgname}-common-gtk2-ansi
 147 Obsoletes: %{pkgname}-common-gtk2-unicode
 148
 149 %description -n %{pkgname}-common-%{port}-%{chartype}
 150 This package contains the common files needed by any version of the
 151 wxPython runtime.  This pacakge also installs a wx.pth file which will
 152 determine which of the installed runtimes is the default version of
 153 wxPython that is imported automatically with a bare "import wx".
 154
 155
 156
 157
 158
 159 %package -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
 160 Summary: wxPython development files
 161 Group: Development/Libraries
 162 Requires: %{pkgname}%{ver2}-%{port}-%{chartype} = %{version}
 163
 164 %description -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
 165 This packages contains the headers and etc. for building apps or
 166 Python extension modules that use the same wxWidgets shared libraries
 167 that wxPython uses.
 168
 169
 170
 171 #----------------------------------------------------------------------
 172 %prep
 173 %setup -q -n %{tarname}-%{version}
 174
 175
 176 #----------------------------------------------------------------------
 177 %build
 178
 179 WXDIR=`pwd`
 180
 181 # Configure and build wxWidgets
 182 mkdir bld
 183 cd bld
 184 ../configure --with-gtk \
 185         --prefix=%{wxpref} \
 186         --enable-monolithic \
 187         --enable-rpath=%{wxpref}/lib \
 188         --with-opengl \
 189         --enable-geometry \
 190         --enable-optimise \
 191         --enable-sound  --with-sdl \
 192         --enable-display \
 193 %if %{using_gtk1}
 194         --disable-gtk2 \
 195 %else
 196         --enable-gtk2 \
 197 %endif
 198 %if %{unicode}
 199         --enable-unicode \
 200 %endif
 201 %if %{debug_flag}
 202         --enable-debug_flag \
 203 %endif
 204 %if %{builtin_libs}
 205         --with-libjpeg=builtin \
 206         --with-libpng=builtin \
 207         --with-libtiff=builtin \
 208         --with-zlib=builtin \
 209 %endif
 210
 211
 212 make
 213 make -C contrib/src/gizmos
 214 ##make -C contrib/src/ogl CXXFLAGS="-DwxUSE_DEPRECATED=0"
 215 make -C contrib/src/stc
 216
 217
 218
 219 # Build wxPython
 220 cd $WXDIR/wxPython
 221 %{python} setup.py \
 222         WXPORT=%{port} \
 223         UNICODE=%{unicode} \
 224         EP_ADD_OPTS=1 \
 225         NO_SCRIPTS=1 \
 226         WX_CONFIG="$WXDIR/bld/wx-config --inplace" \
 227         build
 228
 229
 230
 231 #----------------------------------------------------------------------
 232 %install
 233
 234 WXDIR=`pwd`
 235
 236 # Install wxGTK and contribs
 237 cd bld
 238 make prefix=$RPM_BUILD_ROOT%{wxpref} install
 239 make -C contrib/src/gizmos prefix=$RPM_BUILD_ROOT%{wxpref} install
 240 ##make -C contrib/src/ogl CXXFLAGS="-DwxUSE_DEPRECATED=0" prefix=$RPM_BUILD_ROOT%{wxpref} install
 241 make -C contrib/src/stc prefix=$RPM_BUILD_ROOT%{wxpref} install
 242
 243
 244
 245 # Install wxPython for wxGTK
 246 cd $WXDIR/wxPython
 247 %{python} setup.py \
 248         WXPORT=%{port} \
 249         UNICODE=%{unicode} \
 250         EP_ADD_OPTS=1 \
 251         NO_SCRIPTS=1 \
 252         WX_CONFIG="$RPM_BUILD_ROOT%{wxpref}/bin/wx-config --prefix=$RPM_BUILD_ROOT%{wxpref}" \
 253         install \
 254         --root=$RPM_BUILD_ROOT
 255
 256
 257 # remove the wx-config symlink, we'll redo it when installing the -devel package
 258 rm $RPM_BUILD_ROOT%{wxpref}/bin/wx-config
 259
 260 # make sure that debug info is stripped
 261 strip $RPM_BUILD_ROOT%{pref}/lib*/python%{pyver}/site-packages/wx-%{ver2}*-%{port}-%{chartype}/wx/*.so
 262
 263
 264 # Since I want this RPM to be as generic as possible I won't let
 265 # distutils copy the scripts (NO_SCRIPTS=1 above) since it will mangle
 266 # the #! line to use the real python pathname.  Since some distros
 267 # install python 2.2 as python2 and others as python I can't let
 268 # distutils do that otherwise the dependencies will be fouled up.
 269 # Copy them manually instead, leaving the #!/usr/bin/env line intact.
 270 cd $WXDIR/wxPython
 271 mkdir -p $RPM_BUILD_ROOT%{pref}/bin
 272 for s in \
 273         helpviewer \
 274         img2png \
 275         img2py \
 276         img2xpm \
 277         pyalacarte \
 278         pyalamode \
 279         pycrust \
 280         pywrap \
 281         pyshell \
 282         pywxrc \
 283         xrced; do
 284     cp scripts/$s $RPM_BUILD_ROOT%{pref}/bin
 285 done
 286
 287
 288
 289 # install KDE & GNOME menu items
 290 mkdir -p $RPM_BUILD_ROOT%{_datadir}/applnk/Development
 291 mkdir -p $RPM_BUILD_ROOT%{_datadir}/applications
 292 for d in distrib/*.desktop; do
 293         install -m 644 $d $RPM_BUILD_ROOT%{_datadir}/applnk/Development
 294         install -m 644 $d $RPM_BUILD_ROOT%{_datadir}/applications
 295 done
 296
 297 # install KDE icons
 298 mkdir -p $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/{16x16,32x32}/apps
 299 mkdir -p $RPM_BUILD_ROOT%{_datadir}/pixmaps
 300 install -m 644 wx/py/PyCrust_16.png $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/16x16/apps/PyCrust.png
 301 install -m 644 wx/py/PyCrust_32.png $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/32x32/apps/PyCrust.png
 302 install -m 644 wx/py/PyCrust_32.png $RPM_BUILD_ROOT%{_datadir}/pixmaps/PyCrust.png
 303 install -m 644 wx/tools/XRCed/XRCed_16.png $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/16x16/apps/XRCed.png
 304 install -m 644 wx/tools/XRCed/XRCed_32.png $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/32x32/apps/XRCed.png
 305 install -m 644 wx/tools/XRCed/XRCed_32.png $RPM_BUILD_ROOT%{_datadir}/pixmaps/XRCed.png
 306
 307 # install Mandrake menu items
 308 mkdir -p $RPM_BUILD_ROOT%{_libdir}/menu
 309 cat > $RPM_BUILD_ROOT%{_libdir}/menu/%{pkgname} <<EOF
 310 ?package(%{pkgname}): \\
 311         command="%{_bindir}/pyshell" \\
 312         needs="X11" \\
 313         icon="PyCrust.png" \\
 314         section="Applications/Development/Tools" \\
 315         title="PyShell" \\
 316         longtitle="GUI Python Shell"
 317 ?package(%{pkgname}): \\
 318         command="%{_bindir}/pycrust" \\
 319         needs="X11" \\
 320         icon="PyCrust.png" \\
 321         section="Applications/Development/Tools" \\
 322         title="PyCrust" \\
 323         longtitle="GUI Python Shell with Filling"
 324 ?package(%{pkgname}): \\
 325         command="%{_bindir}/pyalamode" \\
 326         needs="X11" \\
 327         icon="PyCrust.png" \\
 328         section="Applications/Development/Tools" \\
 329         title="PyAlaMode" \\
 330         longtitle="GUI Python Shell with Filling and editor windows"
 331 ?package(%{pkgname}): \\
 332         command="%{_bindir}/xrced" \\
 333         needs="X11" \\
 334         icon="XRCed.png" \\
 335         section="Applications/Development/Tools" \\
 336         title="XRCed" \\
 337         longtitle="wxPython XRC resource editor"
 338 EOF
 339
 340
 341 #----------------------------------------------------------------------
 342
 343 %post -n %{pkgname}%{ver2}-%{port}-%{chartype}
 344 if [ ! -e %{wxprefbase} ]; then
 345         ln -s %{pkgname}-%{version}-%{port}-%{chartype}  %{wxprefbase}
 346 fi
 347
 348 %preun -n %{pkgname}%{ver2}-%{port}-%{chartype}
 349 if [ -L %{wxprefbase} ]; then
 350         if [ `readlink %{wxprefbase}` == %{pkgname}-%{version}-%{port}-%{chartype} ]; then
 351                 rm -f %{wxprefbase}
 352         fi
 353 fi
 354
 355
 356
 357
 358 %post -n %{pkgname}-common-%{port}-%{chartype}
 359 # This is done on Mandrake to update its menus:
 360 if [ -x /usr/bin/update-menus ]; then /usr/bin/update-menus || true ; fi
 361
 362 %postun -n %{pkgname}-common-%{port}-%{chartype}
 363 # This is done on Mandrake to update its menus:
 364 if [ "$1" = "0" -a -x /usr/bin/update-menus ]; then /usr/bin/update-menus || true ; fi
 365
 366
 367
 368 %post -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
 369 cd %{wxpref}/bin
 370 ln -s ../lib/wx/config/%{port}-%{chartype}*  wx-config
 371
 372 %preun -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
 373 rm %{wxpref}/bin/wx-config
 374
 375
 376 #----------------------------------------------------------------------
 377 %clean
 378 [ "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT
 379
 380
 381 #----------------------------------------------------------------------
 382
 383 %files -n %{pkgname}%{ver2}-%{port}-%{chartype}
 384 %defattr(-,root,root)
 385 %doc docs/preamble.txt docs/licence.txt docs/lgpl.txt docs/readme.txt docs/changes.txt
 386 %doc wxPython/docs/*
 387 %dir %{pref}/lib*/python%{pyver}/site-packages/wx-%{ver2}*-%{port}-%{chartype}
 388 %{pref}/lib*/python%{pyver}/site-packages/wx-%{ver2}*-%{port}-%{chartype}/*
 389 %dir %{wxpref}
 390 %dir %{wxpref}/lib
 391 %{wxpref}/lib/libwx_gtk*
 392 %{wxpref}/share
 393
 394
 395
 396 %files -n %{pkgname}-common-%{port}-%{chartype}
 397 %defattr(-,root,root)
 398 %{pref}/lib*/python%{pyver}/site-packages/wxversion.*
 399 %{pref}/lib*/python%{pyver}/site-packages/wx.pth
 400 %{_bindir}/*
 401 %{_datadir}/applnk/Development/*
 402 %{_datadir}/applications/*
 403 %{_datadir}/icons/hicolor/*/apps/*
 404 %{_datadir}/pixmaps/*
 405 %{_libdir}/menu/*
 406
 407
 408
 409
 410
 411 %files -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
 412 %defattr(-,root,root)
 413 %{wxpref}/include
 414 %{wxpref}/lib/wx
 415 %dir %{wxpref}/bin
 416
 417
 418 #----------------------------------------------------------------------
 419 # end of file