docs/latex/wx/tconstr.tex

   1 \section{Constraints overview}\label{constraintsoverview}
   2
   3 Classes: \helpref{wxLayoutConstraints}{wxlayoutconstraints}, \helpref{wxIndividualLayoutConstraint}{wxindividuallayoutconstraint}.
   4
   5 {\bf Note:} constraints are now deprecated and you should use \helpref{sizers}{sizeroverview} instead.
   6
   7 Objects of class wxLayoutConstraint can be associated with a window to define
   8 the way it is laid out, with respect to its siblings or the parent.
   9
  10 The class consists of the following eight constraints of class wxIndividualLayoutConstraint,
  11 some or all of which should be accessed directly to set the appropriate
  12 constraints.
  13
  14 \begin{itemize}\itemsep=0pt
  15 \item {\bf left:} represents the left hand edge of the window
  16 \item {\bf right:} represents the right hand edge of the window
  17 \item {\bf top:} represents the top edge of the window
  18 \item {\bf bottom:} represents the bottom edge of the window
  19 \item {\bf width:} represents the width of the window
  20 \item {\bf height:} represents the height of the window
  21 \item {\bf centreX:} represents the horizontal centre point of the window
  22 \item {\bf centreY:} represents the vertical centre point of the window
  23 \end{itemize}
  24
  25 The constraints are initially set to have the relationship wxUnconstrained,
  26 which means that their values should be calculated by looking at known constraints.
  27 To calculate the position and size of the control, the layout algorithm needs to
  28 know exactly 4 constraints (as it has 4 numbers to calculate from them), so you
  29 should always set exactly 4 of the constraints from the above table.
  30
  31 If you want the controls height or width to have the default value, you may use
  32 a special value for the constraint: wxAsIs. If the constraint is wxAsIs, the
  33 dimension will not be changed which is useful for the dialog controls which
  34 often have the default size (e.g. the buttons whose size is determined by their
  35 label).
  36
  37 The constrains calculation is done in \helpref{wxWindow::Layout}{wxwindowlayout}
  38 function which evaluates constraints. To call it you can either call
  39 \helpref{wxWindow::SetAutoLayout}{wxwindowsetautolayout} if the parent window
  40 is a frame, panel or a dialog to tell default OnSize handlers to call Layout
  41 automatically whenever the window size changes, or override OnSize and call
  42 Layout yourself (note that you do have to call
  43 \helpref{Layout}{wxwindowlayout} yourself if the parent window is not a
  44 frame, panel or dialog).
  45
  46 \subsection{Constraint layout: more detail}
  47
  48 By default, windows do not have a wxLayoutConstraints object. In this case, much layout
  49 must be done explicitly, by performing calculations in OnSize members, except
  50 for the case of frames that have exactly one subwindow (not counting toolbar and
  51 statusbar which are also positioned by the frame automatically), where wxFrame::OnSize
  52 takes care of resizing the child to always fill the frame.
  53
  54 To avoid the need for these rather awkward calculations, the user can create
  55 a wxLayoutConstraints object and associate it with a window with wxWindow::SetConstraints.
  56 This object contains a constraint for each of the window edges, two for the centre point,
  57 and two for the window size. By setting some or all of these constraints appropriately,
  58 the user can achieve quite complex layout by defining relationships between windows.
  59
  60 In wxWindows, each window can be constrained relative to either its {\it
  61 siblings} on the same window, or the {\it parent}. The layout algorithm
  62 therefore operates in a top-down manner, finding the correct layout for
  63 the children of a window, then the layout for the grandchildren, and so
  64 on. Note that this differs markedly from native Motif layout, where
  65 constraints can ripple upwards and can eventually change the frame
  66 window or dialog box size. We assume in wxWindows that the {\it user} is
  67 always `boss' and specifies the size of the outer window, to which
  68 subwindows must conform. Obviously, this might be a limitation in some
  69 circumstances, but it suffices for most situations, and the
  70 simplification avoids some of the nightmarish problems associated with
  71 programming Motif.
  72
  73 When the user sets constraints, many of the constraints for windows
  74 edges and dimensions remain unconstrained. For a given window,
  75 the wxWindow::Layout algorithm first resets all constraints
  76 in all children to have unknown edge or dimension values, and then iterates through the constraints,
  77 evaluating them. For unconstrained edges and dimensions, it
  78 tries to find the value using known relationships that always hold. For example,
  79 an unconstrained {\it width} may be calculated from the {\it left} and {\it right edges}, if
  80 both are currently known. For edges and dimensions with user-supplied constraints, these
  81 constraints are evaluated if the inputs of the constraint are known.
  82
  83 The algorithm stops when all child edges and dimension are known (success), or
  84 there are unknown edges or dimensions but there has been no change in this cycle (failure).
  85
  86 It then sets all the window positions and sizes according to the values it has found.
  87
  88 Because the algorithm is iterative, the order in which constraints are considered is
  89 irrelevant, however you may reduce the number of iterations (and thus speed up
  90 the layout calculations) by creating the controls in such order that as many
  91 constraints as possible can be calculated during the first iteration. For example, if
  92 you have 2 buttons which you'd like to position in the lower right corner, it is
  93 slightly more efficient to first create the second button and specify that its
  94 right border IsSameAs(parent, wxRight) and then create the first one by
  95 specifying that it should be LeftOf() the second one than to do in a more
  96 natural left-to-right order.
  97
  98 \subsection{Window layout examples}\label{layoutexamples}
  99
 100 \subsubsection{Example 1: subwindow layout}
 101
 102 This example specifies a panel and a window side by side,
 103 with a text subwindow below it.
 104
 105 \begin{verbatim}
 106   frame->panel = new wxPanel(frame, -1, wxPoint(0, 0), wxSize(1000, 500), 0);
 107   frame->scrollWindow = new MyScrolledWindow(frame, -1, wxPoint(0, 0), wxSize(400, 400), wxRETAINED);
 108   frame->text_window = new MyTextWindow(frame, -1, wxPoint(0, 250), wxSize(400, 250));
 109
 110   // Set constraints for panel subwindow
 111   wxLayoutConstraints *c1 = new wxLayoutConstraints;
 112
 113   c1->left.SameAs       (frame, wxLeft);
 114   c1->top.SameAs        (frame, wxTop);
 115   c1->right.PercentOf   (frame, wxWidth, 50);
 116   c1->height.PercentOf  (frame, wxHeight, 50);
 117
 118   frame->panel->SetConstraints(c1);
 119
 120   // Set constraints for scrollWindow subwindow
 121   wxLayoutConstraints *c2 = new wxLayoutConstraints;
 122
 123   c2->left.SameAs       (frame->panel, wxRight);
 124   c2->top.SameAs        (frame, wxTop);
 125   c2->right.SameAs      (frame, wxRight);
 126   c2->height.PercentOf  (frame, wxHeight, 50);
 127
 128   frame->scrollWindow->SetConstraints(c2);
 129
 130   // Set constraints for text subwindow
 131   wxLayoutConstraints *c3 = new wxLayoutConstraints;
 132   c3->left.SameAs       (frame, wxLeft);
 133   c3->top.Below         (frame->panel);
 134   c3->right.SameAs      (frame, wxRight);
 135   c3->bottom.SameAs     (frame, wxBottom);
 136
 137   frame->text_window->SetConstraints(c3);
 138 \end{verbatim}
 139
 140 \subsubsection{Example 2: panel item layout}
 141
 142 This example sizes a button width to 80 percent of the panel width, and centres
 143 it horizontally. A listbox and multitext item are placed below it. The listbox
 144 takes up 40 percent of the panel width, and the multitext item takes up
 145 the remainder of the width. Margins of 5 pixels are used.
 146
 147 \begin{verbatim}
 148   // Create some panel items
 149   wxButton *btn1 = new wxButton(frame->panel, -1, "A button") ;
 150
 151   wxLayoutConstraints *b1 = new wxLayoutConstraints;
 152   b1->centreX.SameAs    (frame->panel, wxCentreX);
 153   b1->top.SameAs        (frame->panel, wxTop, 5);
 154   b1->width.PercentOf   (frame->panel, wxWidth, 80);
 155   b1->height.PercentOf  (frame->panel, wxHeight, 10);
 156   btn1->SetConstraints(b1);
 157
 158   wxListBox *list = new wxListBox(frame->panel, -1, "A list",
 159                                   wxPoint(-1, -1), wxSize(200, 100));
 160
 161   wxLayoutConstraints *b2 = new wxLayoutConstraints;
 162   b2->top.Below         (btn1, 5);
 163   b2->left.SameAs       (frame->panel, wxLeft, 5);
 164   b2->width.PercentOf   (frame->panel, wxWidth, 40);
 165   b2->bottom.SameAs     (frame->panel, wxBottom, 5);
 166   list->SetConstraints(b2);
 167
 168   wxTextCtrl *mtext = new wxTextCtrl(frame->panel, -1, "Multiline text", "Some text",
 169                         wxPoint(-1, -1), wxSize(150, 100), wxTE_MULTILINE);
 170
 171   wxLayoutConstraints *b3 = new wxLayoutConstraints;
 172   b3->top.Below         (btn1, 5);
 173   b3->left.RightOf      (list, 5);
 174   b3->right.SameAs      (frame->panel, wxRight, 5);
 175   b3->bottom.SameAs     (frame->panel, wxBottom, 5);
 176   mtext->SetConstraints(b3);
 177 \end{verbatim}
 178
 179