wxPython/distrib/wxPythonFull.spec.in

   1 #----------------------------------------------------------------------
   2 # Name:        wxPython.spec
   3 # Purpose:     RPM Build and packaging instructions
   4 #
   5 # Author:      Robin Dunn
   6 #
   7 # RCS-ID:      $Id$
   8 # Copyright:   (c) 2004 by Total Control Software
   9 # Licence:     wxWindows license
  10 #----------------------------------------------------------------------
  11
  12
  13 # The following values can be set on the rpmbuild command line with
  14 # --define 'name VALUE'  If no value is set on the command line then
  15 # the default value set here will be used instead.
  16
  17
  18 # Which version of Python to build with.  Used to assemble python
  19 # binary name so use '2.2', '2.3', etc.
  20 %if %{?pyver:0}%{!?pyver:1}
  21 %define pyver 2.3
  22 %endif
  23
  24
  25 # Which wxWidgets port to build and use.  Current acceptable values
  26 # are 'gtk' and 'gtk2'.
  27 %if %{?port:0}%{!?port:1}
  28 %define port gtk2
  29 %endif
  30
  31
  32 # Build in unicode mode?  Can only be used if port is gtk2, acceptable
  33 # values are '0' and '1'
  34 %if %{?unicode:0}%{!?unicode:1}
  35 %define unicode 1
  36 %endif
  37
  38
  39 # Should the builtin image and etc. libs be used, or system libs?
  40 # Distro specific RPMs should probably set this to 0, generic ones
  41 # should use 1.
  42 # NOTE: I'm trying 0 for this next release to see if I can get rid of
  43 # this...
  44 %if %{?builtin_libs:0}%{!?builtin_libs:1}
  45 %define builtin_libs 0
  46 %endif
  47
  48
  49 # Should --enable-debug_flag be used in release builds?  Using it
  50 # defines __WXDEBUG__ and gives us runtime diagnostics that are turned
  51 # into Python exceptions.  (So turning it on is a very helpful thing
  52 # IMO and is recommended.)  The code is still compiled with
  53 # optimization flags and and without debug info and such when this
  54 # option is used, it simply turns on some extra code.
  55 %if %{?debug_flag:0}%{!?debug_flag:1}
  56 %define debug_flag 1
  57 %endif
  58
  59
  60 # Used to set the Release tag below.  I normally use it to define what
  61 # distro the RPM was build on and also include the version of Python
  62 # it was built with.
  63 %if %{?release:0}%{!?release:1}
  64 %define release 1_py%{pyver}
  65 %endif
  66
  67
  68
  69 #----------------------------------------------------------------------
  70 # Other variables used below
  71
  72 %define pref       %{_prefix}
  73 %define python     /usr/bin/python%{pyver}
  74 %define tarname    @TARNAME@
  75 %define version    @VERSION@
  76 %define ver2       @VER2@
  77
  78 %define chartype   %(if [ "%{unicode}" = "1" ]; then echo unicode; else echo ansi; fi)
  79 %define gtktype    %(if [ "%{port}" = "gtk2" ]; then echo 2; fi)
  80 %define using_gtk1 %(if [ "%{port}" = "gtk" ]; then echo 1; else echo 0; fi)
  81
  82 %define wxprefbase %{pref}/lib/wxPython
  83 %define wxpref     %{wxprefbase}-%{version}-%{port}-%{chartype}
  84 %define pkgname    wxPython
  85
  86 # turn off the generation of debuginfo rpm  (RH9) ??
  87 %define debug_package %{nil}
  88
  89
  90 #----------------------------------------------------------------------
  91 # Package definition
  92 #----------------------------------------------------------------------
  93 Name:      %{pkgname}%{ver2}
  94 Summary:   Cross platform GUI toolkit for Python
  95 Version:   %{version}
  96 Release:   %{release}
  97 Source0:   %{tarname}-%{version}.tar.gz
  98 License:   wx Library Licence, Version 3
  99 URL:       http://wxPython.org/
 100 Packager:  Robin Dunn <robin@alldunn.com>
 101 Group:     Development/Python
 102 BuildRoot: %{_tmppath}/%{pkgname}-buildroot
 103 Prefix:    %{pref}
 104
 105 %description
 106 Cross platform GUI toolkit for Python
 107
 108
 109
 110
 111 %package -n %{pkgname}%{ver2}-%{port}-%{chartype}
 112 Summary:   Cross platform GUI toolkit for Python
 113 Group:     Development/Python
 114 Requires:  %{pkgname}-common
 115 Obsoletes: wxPythonGTK%{gtktype}-py%{pyver}
 116 Provides:  wxPython
 117
 118
 119 %description -n %{pkgname}%{ver2}-%{port}-%{chartype}
 120 wxPython is a GUI toolkit for the Python programming language. It
 121  allows Python programmers to create programs with a robust, highly
 122 functional graphical user interface, simply and easily. It is
 123 implemented as a Python extension module (native code) that wraps the
 124 popular wxWidgets cross platform GUI library, which is written in C++.
 125
 126 wxPython is a cross-platform toolkit. The same program will usually
 127 run on multiple platforms without modification. Currently supported
 128 platforms are 32-bit Microsoft Windows, most Unix or unix-like
 129 systems, and Macintosh OS X.
 130
 131 This package contains the wxPython runtime files built for the
 132 wxWidgets %{port} port with %{chartype} character type.
 133
 134
 135
 136
 137
 138 %package -n %{pkgname}-common-%{port}-%{chartype}
 139 Summary: Common files for needed by all wxPython runtimes
 140 Group: Development/Python
 141 Provides: %{pkgname}-common
 142
 143 # They obsolete each other so any of them can be installed over another
 144 # without conflicts
 145 Obsoletes: %{pkgname}-common-gtk-ansi
 146 Obsoletes: %{pkgname}-common-gtk2-ansi
 147 Obsoletes: %{pkgname}-common-gtk2-unicode
 148
 149 %description -n %{pkgname}-common-%{port}-%{chartype}
 150 This package contains the common files needed by any version of the
 151 wxPython runtime.  This pacakge also installs a wx.pth file which will
 152 determine which of the installed runtimes is the default version of
 153 wxPython that is imported automatically with a bare "import wx".
 154
 155
 156
 157
 158
 159 %package -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
 160 Summary: wxPython development files
 161 Group: Development/Libraries
 162 Requires: %{pkgname}%{ver2}-%{port}-%{chartype} = %{version}
 163
 164 %description -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
 165 This packages contains the headers and etc. for building apps or
 166 Python extension modules that use the same wxWidgets shared libraries
 167 that wxPython uses.
 168
 169
 170
 171 #----------------------------------------------------------------------
 172 %prep
 173 %setup -q -n %{tarname}-%{version}
 174
 175
 176 #----------------------------------------------------------------------
 177 %build
 178
 179 WXDIR=`pwd`
 180
 181 # Configure and build wxWidgets
 182 mkdir bld
 183 cd bld
 184 ../configure --with-gtk \
 185         --prefix=%{wxpref} \
 186         --enable-monolithic \
 187         --disable-rpath \
 188         --with-opengl \
 189         --enable-geometry \
 190         --enable-optimise \
 191         --enable-sound  --with-sdl \
 192         --enable-display \
 193 %if %{using_gtk1}
 194         --disable-gtk2 \
 195 %else
 196         --enable-gtk2 \
 197 %endif
 198 %if %{unicode}
 199         --enable-unicode \
 200 %endif
 201 %if %{debug_flag}
 202         --enable-debug_flag \
 203 %endif
 204         --disable-debugreport \
 205 %if %{builtin_libs}
 206         --with-libjpeg=builtin \
 207         --with-libpng=builtin \
 208         --with-libtiff=builtin \
 209         --with-zlib=builtin \
 210 %endif
 211
 212
 213 make
 214 make -C contrib/src/gizmos
 215 ##make -C contrib/src/ogl CXXFLAGS="-DwxUSE_DEPRECATED=0"
 216 make -C contrib/src/stc
 217
 218
 219
 220 # Build wxPython
 221 cd $WXDIR/wxPython
 222 %{python} setup.py \
 223         WXPORT=%{port} \
 224         UNICODE=%{unicode} \
 225         EP_ADD_OPTS=1 \
 226         NO_SCRIPTS=1 \
 227         WX_CONFIG="$WXDIR/bld/wx-config --no_rpath" \
 228         build_ext --rpath=%{wxpref}/lib \
 229         build
 230
 231
 232
 233 #----------------------------------------------------------------------
 234 %install
 235
 236 WXDIR=`pwd`
 237
 238 # Install wxGTK and contribs
 239 cd bld
 240 make prefix=$RPM_BUILD_ROOT%{wxpref} install
 241 make -C contrib/src/gizmos prefix=$RPM_BUILD_ROOT%{wxpref} install
 242 ##make -C contrib/src/ogl CXXFLAGS="-DwxUSE_DEPRECATED=0" prefix=$RPM_BUILD_ROOT%{wxpref} install
 243 make -C contrib/src/stc prefix=$RPM_BUILD_ROOT%{wxpref} install
 244
 245
 246
 247 # Install wxPython for wxGTK
 248 cd $WXDIR/wxPython
 249 %{python} setup.py \
 250         WXPORT=%{port} \
 251         UNICODE=%{unicode} \
 252         EP_ADD_OPTS=1 \
 253         NO_SCRIPTS=1 \
 254         WX_CONFIG="$RPM_BUILD_ROOT%{wxpref}/bin/wx-config --prefix=$RPM_BUILD_ROOT%{wxpref} --no_rpath" \
 255         build_ext --rpath=%{wxpref}/lib \
 256         install \
 257         --root=$RPM_BUILD_ROOT
 258
 259
 260 # remove the wx-config symlink, we'll redo it when installing the -devel package
 261 rm $RPM_BUILD_ROOT%{wxpref}/bin/wx-config
 262
 263 # make sure that debug info is stripped
 264 strip $RPM_BUILD_ROOT%{pref}/lib*/python%{pyver}/site-packages/wx-%{ver2}*-%{port}-%{chartype}/wx/*.so
 265
 266
 267 # Since I want this RPM to be as generic as possible I won't let
 268 # distutils copy the scripts (NO_SCRIPTS=1 above) since it will mangle
 269 # the #! line to use the real python pathname.  Since some distros
 270 # install python 2.2 as python2 and others as python I can't let
 271 # distutils do that otherwise the dependencies will be fouled up.
 272 # Copy them manually instead, leaving the #!/usr/bin/env line intact.
 273 cd $WXDIR/wxPython
 274 mkdir -p $RPM_BUILD_ROOT%{pref}/bin
 275 for s in \
 276         helpviewer \
 277         img2png \
 278         img2py \
 279         img2xpm \
 280         pyalacarte \
 281         pyalamode \
 282         pycrust \
 283         pywrap \
 284         pyshell \
 285         pywxrc \
 286         xrced; do
 287     cp scripts/$s $RPM_BUILD_ROOT%{pref}/bin
 288 done
 289
 290
 291
 292 # install KDE & GNOME menu items
 293 mkdir -p $RPM_BUILD_ROOT%{_datadir}/applnk/Development
 294 mkdir -p $RPM_BUILD_ROOT%{_datadir}/applications
 295 for d in distrib/*.desktop; do
 296         install -m 644 $d $RPM_BUILD_ROOT%{_datadir}/applnk/Development
 297         install -m 644 $d $RPM_BUILD_ROOT%{_datadir}/applications
 298 done
 299
 300 # install KDE icons
 301 mkdir -p $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/{16x16,32x32}/apps
 302 mkdir -p $RPM_BUILD_ROOT%{_datadir}/pixmaps
 303 install -m 644 wx/py/PyCrust_16.png $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/16x16/apps/PyCrust.png
 304 install -m 644 wx/py/PyCrust_32.png $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/32x32/apps/PyCrust.png
 305 install -m 644 wx/py/PyCrust_32.png $RPM_BUILD_ROOT%{_datadir}/pixmaps/PyCrust.png
 306 install -m 644 wx/tools/XRCed/XRCed_16.png $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/16x16/apps/XRCed.png
 307 install -m 644 wx/tools/XRCed/XRCed_32.png $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/32x32/apps/XRCed.png
 308 install -m 644 wx/tools/XRCed/XRCed_32.png $RPM_BUILD_ROOT%{_datadir}/pixmaps/XRCed.png
 309
 310 # install Mandrake menu items
 311 mkdir -p $RPM_BUILD_ROOT%{_libdir}/menu
 312 cat > $RPM_BUILD_ROOT%{_libdir}/menu/%{pkgname} <<EOF
 313 ?package(%{pkgname}): \\
 314         command="%{_bindir}/pyshell" \\
 315         needs="X11" \\
 316         icon="PyCrust.png" \\
 317         section="Applications/Development/Tools" \\
 318         title="PyShell" \\
 319         longtitle="GUI Python Shell"
 320 ?package(%{pkgname}): \\
 321         command="%{_bindir}/pycrust" \\
 322         needs="X11" \\
 323         icon="PyCrust.png" \\
 324         section="Applications/Development/Tools" \\
 325         title="PyCrust" \\
 326         longtitle="GUI Python Shell with Filling"
 327 ?package(%{pkgname}): \\
 328         command="%{_bindir}/pyalamode" \\
 329         needs="X11" \\
 330         icon="PyCrust.png" \\
 331         section="Applications/Development/Tools" \\
 332         title="PyAlaMode" \\
 333         longtitle="GUI Python Shell with Filling and editor windows"
 334 ?package(%{pkgname}): \\
 335         command="%{_bindir}/xrced" \\
 336         needs="X11" \\
 337         icon="XRCed.png" \\
 338         section="Applications/Development/Tools" \\
 339         title="XRCed" \\
 340         longtitle="wxPython XRC resource editor"
 341 EOF
 342
 343
 344 #----------------------------------------------------------------------
 345
 346 %post -n %{pkgname}%{ver2}-%{port}-%{chartype}
 347 if [ ! -e %{wxprefbase} ]; then
 348         ln -s %{pkgname}-%{version}-%{port}-%{chartype}  %{wxprefbase}
 349 fi
 350
 351 %preun -n %{pkgname}%{ver2}-%{port}-%{chartype}
 352 if [ -L %{wxprefbase} ]; then
 353         if [ `readlink %{wxprefbase}` == %{pkgname}-%{version}-%{port}-%{chartype} ]; then
 354                 rm -f %{wxprefbase}
 355         fi
 356 fi
 357
 358
 359
 360
 361 %post -n %{pkgname}-common-%{port}-%{chartype}
 362 # This is done on Mandrake to update its menus:
 363 if [ -x /usr/bin/update-menus ]; then /usr/bin/update-menus || true ; fi
 364
 365 %postun -n %{pkgname}-common-%{port}-%{chartype}
 366 # This is done on Mandrake to update its menus:
 367 if [ "$1" = "0" -a -x /usr/bin/update-menus ]; then /usr/bin/update-menus || true ; fi
 368
 369
 370
 371 %post -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
 372 cd %{wxpref}/bin
 373 ln -s ../lib/wx/config/%{port}-%{chartype}*  wx-config
 374
 375 %preun -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
 376 rm %{wxpref}/bin/wx-config
 377
 378
 379 #----------------------------------------------------------------------
 380 %clean
 381 [ "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT
 382
 383
 384 #----------------------------------------------------------------------
 385
 386 %files -n %{pkgname}%{ver2}-%{port}-%{chartype}
 387 %defattr(-,root,root)
 388 %doc docs/preamble.txt docs/licence.txt docs/lgpl.txt docs/readme.txt docs/changes.txt
 389 %doc wxPython/docs/*
 390 %dir %{pref}/lib*/python%{pyver}/site-packages/wx-%{ver2}*-%{port}-%{chartype}
 391 %{pref}/lib*/python%{pyver}/site-packages/wx-%{ver2}*-%{port}-%{chartype}/*
 392 %dir %{wxpref}
 393 %dir %{wxpref}/lib
 394 %{wxpref}/lib/libwx_gtk*
 395 %{wxpref}/share
 396
 397
 398
 399 %files -n %{pkgname}-common-%{port}-%{chartype}
 400 %defattr(-,root,root)
 401 %{pref}/lib*/python%{pyver}/site-packages/wxversion.*
 402 %{pref}/lib*/python%{pyver}/site-packages/wx.pth
 403 %{_bindir}/*
 404 %{_datadir}/applnk/Development/*
 405 %{_datadir}/applications/*
 406 %{_datadir}/icons/hicolor/*/apps/*
 407 %{_datadir}/pixmaps/*
 408 %{_libdir}/menu/*
 409
 410
 411
 412
 413
 414 %files -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
 415 %defattr(-,root,root)
 416 %{wxpref}/include
 417 %{wxpref}/lib/wx
 418 %dir %{wxpref}/bin
 419
 420
 421 #----------------------------------------------------------------------
 422 # end of file