| | 1 | # =========================================================================\r |
| | 2 | # This configuration file was generated by\r |
| | 3 | # Bakefile 0.2.9 (http://www.bakefile.org)\r |
| | 4 | # Beware that all changes made to this file will be overwritten next\r |
| | 5 | # time you run Bakefile!\r |
| | 6 | # =========================================================================\r |
| | 7 | \r |
| | 8 | \r |
| | 9 | # -------------------------------------------------------------------------\r |
| | 10 | # These are configurable options:\r |
| | 11 | # -------------------------------------------------------------------------\r |
| | 12 | \r |
| | 13 | # Compiler flags to link shared library \r |
| | 14 | LINK_DLL_FLAGS ?= -shared\r |
| | 15 | \r |
| | 16 | # Compiler flags to link loadable module \r |
| | 17 | LINK_MODULE_FLAGS ?= -shared\r |
| | 18 | \r |
| | 19 | # C compiler \r |
| | 20 | CC = gcc\r |
| | 21 | \r |
| | 22 | # C++ compiler \r |
| | 23 | CXX = g++\r |
| | 24 | \r |
| | 25 | # Standard flags for CC \r |
| | 26 | CFLAGS ?= \r |
| | 27 | \r |
| | 28 | # Standard flags for C++ \r |
| | 29 | CXXFLAGS ?= \r |
| | 30 | \r |
| | 31 | # Standard preprocessor flags (common for CC and CXX) \r |
| | 32 | CPPFLAGS ?= \r |
| | 33 | \r |
| | 34 | # Standard linker flags \r |
| | 35 | LDFLAGS ?= \r |
| | 36 | \r |
| | 37 | # The C preprocessor \r |
| | 38 | CPP ?= $(CC) -E\r |
| | 39 | \r |
| | 40 | # What type of library to build? [0,1]\r |
| | 41 | SHARED ?= 0\r |
| | 42 | \r |
| | 43 | # GTK+ toolkit version [,2]\r |
| | 44 | TOOLKIT_VERSION ?= \r |
| | 45 | \r |
| | 46 | # Build wxUniversal instead of native port? [0,1]\r |
| | 47 | WXUNIV ?= 0\r |
| | 48 | \r |
| | 49 | # Compile Unicode build of wxWidgets? [0,1]\r |
| | 50 | UNICODE ?= 1\r |
| | 51 | \r |
| | 52 | # Use MSLU library when building Unicode version. [0,1]\r |
| | 53 | MSLU ?= 0\r |
| | 54 | \r |
| | 55 | # Type of compiled binaries [debug,release]\r |
| | 56 | BUILD ?= debug\r |
| | 57 | \r |
| | 58 | # Should debugging info be included in the executables? The default value\r |
| | 59 | # "default" means that debug info will be included if BUILD=debug\r |
| | 60 | # and not included if BUILD=release. [0,1,default]\r |
| | 61 | DEBUG_INFO ?= default\r |
| | 62 | \r |
| | 63 | # Value of wxDEBUG_LEVEL. The default value is the same as 1 and means that all\r |
| | 64 | # but expensive assert checks are enabled, use 0 to completely remove debugging\r |
| | 65 | # code. [0,1,default]\r |
| | 66 | DEBUG_FLAG ?= 1\r |
| | 67 | \r |
| | 68 | # Multiple libraries or single huge monolithic one? [0,1]\r |
| | 69 | MONOLITHIC ?= 0\r |
| | 70 | \r |
| | 71 | # Build GUI libraries? [0,1]\r |
| | 72 | USE_GUI ?= 1\r |
| | 73 | \r |
| | 74 | # Build wxHTML library (USE_GUI must be 1)? [0,1]\r |
| | 75 | USE_HTML ?= 1\r |
| | 76 | \r |
| | 77 | # Build wxWebView library (USE_GUI must be 1)? [0,1]\r |
| | 78 | USE_WEBVIEW ?= 1\r |
| | 79 | \r |
| | 80 | # Build multimedia library (USE_GUI must be 1)? [0,1]\r |
| | 81 | USE_MEDIA ?= 1\r |
| | 82 | \r |
| | 83 | # Build wxXRC library (USE_GUI must be 1)? [0,1]\r |
| | 84 | USE_XRC ?= 1\r |
| | 85 | \r |
| | 86 | # Build wxAUI library (USE_GUI must be 1)? [0,1]\r |
| | 87 | USE_AUI ?= 1\r |
| | 88 | \r |
| | 89 | # Build wxRibbon library (USE_GUI must be 1)? [0,1]\r |
| | 90 | USE_RIBBON ?= 1\r |
| | 91 | \r |
| | 92 | # Build wxPropertyGrid library (USE_GUI must be 1)? [0,1]\r |
| | 93 | USE_PROPGRID ?= 1\r |
| | 94 | \r |
| | 95 | # Build wxRichTextCtrl library (USE_GUI must be 1)? [0,1]\r |
| | 96 | USE_RICHTEXT ?= 1\r |
| | 97 | \r |
| | 98 | # Build wxStyledTextCtrl library (USE_GUI must be 1)? [0,1]\r |
| | 99 | USE_STC ?= 1\r |
| | 100 | \r |
| | 101 | # Build OpenGL canvas library (USE_GUI must be 1)? [0,1]\r |
| | 102 | USE_OPENGL ?= 1\r |
| | 103 | \r |
| | 104 | # Build quality assurance classes library (USE_GUI must be 1)? [0,1]\r |
| | 105 | USE_QA ?= 0\r |
| | 106 | \r |
| | 107 | # Enable exceptions in compiled code. [0,1]\r |
| | 108 | USE_EXCEPTIONS ?= 1\r |
| | 109 | \r |
| | 110 | # Enable run-time type information (RTTI) in compiled code. [0,1]\r |
| | 111 | USE_RTTI ?= 1\r |
| | 112 | \r |
| | 113 | # Enable threading in compiled code. [0,1]\r |
| | 114 | USE_THREADS ?= 1\r |
| | 115 | \r |
| | 116 | # Enable wxCairoContext for platforms other than Linux/GTK. [0,1]\r |
| | 117 | USE_CAIRO ?= 0\r |
| | 118 | \r |
| | 119 | # Is this official build by wxWidgets developers? [0,1]\r |
| | 120 | OFFICIAL_BUILD ?= 0\r |
| | 121 | \r |
| | 122 | # Use this to name your customized DLLs differently \r |
| | 123 | VENDOR ?= custom\r |
| | 124 | \r |
| | 125 | # \r |
| | 126 | WX_FLAVOUR ?= \r |
| | 127 | \r |
| | 128 | # \r |
| | 129 | WX_LIB_FLAVOUR ?= \r |
| | 130 | \r |
| | 131 | # Name of your custom configuration. This affects directory\r |
| | 132 | # where object files are stored as well as the location of\r |
| | 133 | # compiled .lib files and setup.h under the lib/ toplevel directory. \r |
| | 134 | CFG ?= \r |
| | 135 | \r |
| | 136 | # Compiler flags needed to compile test suite in tests directory. If you want\r |
| | 137 | # to run the tests, set it so that the compiler can find CppUnit headers. \r |
| | 138 | CPPUNIT_CFLAGS ?= \r |
| | 139 | \r |
| | 140 | # Linker flags needed to link test suite in tests directory. If you want\r |
| | 141 | # to run the tests, include CppUnit library here. \r |
| | 142 | CPPUNIT_LIBS ?= \r |
| | 143 | \r |
| | 144 | # Version of C runtime library to use. You can change this to\r |
| | 145 | # static if SHARED=0, but it is highly recommended to not do\r |
| | 146 | # it if SHARED=1 unless you know what you are doing. [dynamic,static]\r |
| | 147 | RUNTIME_LIBS ?= dynamic\r |
| | 148 | \r |
| | 149 | # Set the version of your Mingw installation here.\r |
| | 150 | # "3" ...... this is for Mingw 2.0 or newer (comes with gcc3)\r |
| | 151 | # "2.95" ... for Mingw 1.1 or any of the older versions [3,2.95]\r |
| | 152 | GCC_VERSION ?= 3\r |
| | 153 | \r |
projects / wxWidgets.git / blame_incremental