]>
Commit | Line | Data |
---|---|---|
1 | ///////////////////////////////////////////////////////////////////////////// | |
2 | // Name: wx/msw/setup.h | |
3 | // Purpose: Configuration for the library | |
4 | // Author: Julian Smart | |
5 | // Modified by: | |
6 | // Created: 01/02/97 | |
7 | // RCS-ID: $Id$ | |
8 | // Copyright: (c) Julian Smart | |
9 | // Licence: wxWindows licence | |
10 | ///////////////////////////////////////////////////////////////////////////// | |
11 | ||
12 | #ifndef _WX_SETUP_H_ | |
13 | #define _WX_SETUP_H_ | |
14 | ||
15 | /* --- start common options --- */ | |
16 | // ---------------------------------------------------------------------------- | |
17 | // global settings | |
18 | // ---------------------------------------------------------------------------- | |
19 | ||
20 | // define this to 0 when building wxBase library - this can also be done from | |
21 | // makefile/project file overriding the value here | |
22 | #ifndef wxUSE_GUI | |
23 | #define wxUSE_GUI 1 | |
24 | #endif // wxUSE_GUI | |
25 | ||
26 | // ---------------------------------------------------------------------------- | |
27 | // compatibility settings | |
28 | // ---------------------------------------------------------------------------- | |
29 | ||
30 | // This setting determines the compatibility with 2.6 API: set it to 0 to | |
31 | // flag all cases of using deprecated functions. | |
32 | // | |
33 | // Default is 1 but please try building your code with 0 as the default will | |
34 | // change to 0 in the next version and the deprecated functions will disappear | |
35 | // in the version after it completely. | |
36 | // | |
37 | // Recommended setting: 0 (please update your code) | |
38 | #define WXWIN_COMPATIBILITY_2_6 0 | |
39 | ||
40 | // This setting determines the compatibility with 2.8 API: set it to 0 to | |
41 | // flag all cases of using deprecated functions. | |
42 | // | |
43 | // Default is 1 but please try building your code with 0 as the default will | |
44 | // change to 0 in the next version and the deprecated functions will disappear | |
45 | // in the version after it completely. | |
46 | // | |
47 | // Recommended setting: 0 (please update your code) | |
48 | #define WXWIN_COMPATIBILITY_2_8 1 | |
49 | ||
50 | // MSW-only: Set to 0 for accurate dialog units, else 1 for old behaviour when | |
51 | // default system font is used for wxWindow::GetCharWidth/Height() instead of | |
52 | // the current font. | |
53 | // | |
54 | // Default is 0 | |
55 | // | |
56 | // Recommended setting: 0 | |
57 | #define wxDIALOG_UNIT_COMPATIBILITY 0 | |
58 | ||
59 | // ---------------------------------------------------------------------------- | |
60 | // debugging settings | |
61 | // ---------------------------------------------------------------------------- | |
62 | ||
63 | // Generic comment about debugging settings: they are very useful if you don't | |
64 | // use any other memory leak detection tools such as Purify/BoundsChecker, but | |
65 | // are probably redundant otherwise. Also, Visual C++ CRT has the same features | |
66 | // as wxWidgets memory debugging subsystem built in since version 5.0 and you | |
67 | // may prefer to use it instead of built in memory debugging code because it is | |
68 | // faster and more fool proof. | |
69 | // | |
70 | // Using VC++ CRT memory debugging is enabled by default in debug mode | |
71 | // (__WXDEBUG__) if wxUSE_GLOBAL_MEMORY_OPERATORS is *not* enabled (i.e. is 0) | |
72 | // and if __NO_VC_CRTDBG__ is not defined. | |
73 | ||
74 | // If 1, enables wxDebugContext, for writing error messages to file, etc. If | |
75 | // __WXDEBUG__ is not defined, will still use the normal memory operators. | |
76 | // | |
77 | // Default is 0 | |
78 | // | |
79 | // Recommended setting: 0 | |
80 | #define wxUSE_DEBUG_CONTEXT 0 | |
81 | ||
82 | // If 1, enables debugging versions of wxObject::new and wxObject::delete *IF* | |
83 | // __WXDEBUG__ is also defined. | |
84 | // | |
85 | // WARNING: this code may not work with all architectures, especially if | |
86 | // alignment is an issue. This switch is currently ignored for mingw / cygwin | |
87 | // | |
88 | // Default is 0 | |
89 | // | |
90 | // Recommended setting: 1 if you are not using a memory debugging tool, else 0 | |
91 | #define wxUSE_MEMORY_TRACING 0 | |
92 | ||
93 | // In debug mode, cause new and delete to be redefined globally. | |
94 | // If this causes problems (e.g. link errors which is a common problem | |
95 | // especially if you use another library which also redefines the global new | |
96 | // and delete), set this to 0. | |
97 | // This switch is currently ignored for mingw / cygwin | |
98 | // | |
99 | // Default is 0 | |
100 | // | |
101 | // Recommended setting: 0 | |
102 | #define wxUSE_GLOBAL_MEMORY_OPERATORS 0 | |
103 | ||
104 | // In debug mode, causes new to be defined to be WXDEBUG_NEW (see object.h). If | |
105 | // this causes problems (e.g. link errors), set this to 0. You may need to set | |
106 | // this to 0 if using templates (at least for VC++). This switch is currently | |
107 | // ignored for mingw / cygwin / CodeWarrior | |
108 | // | |
109 | // Default is 0 | |
110 | // | |
111 | // Recommended setting: 0 | |
112 | #define wxUSE_DEBUG_NEW_ALWAYS 0 | |
113 | ||
114 | // wxHandleFatalExceptions() may be used to catch the program faults at run | |
115 | // time and, instead of terminating the program with a usual GPF message box, | |
116 | // call the user-defined wxApp::OnFatalException() function. If you set | |
117 | // wxUSE_ON_FATAL_EXCEPTION to 0, wxHandleFatalExceptions() will not work. | |
118 | // | |
119 | // This setting is for Win32 only and can only be enabled if your compiler | |
120 | // supports Win32 structured exception handling (currently only VC++ does) | |
121 | // | |
122 | // Default is 1 | |
123 | // | |
124 | // Recommended setting: 1 if your compiler supports it. | |
125 | #define wxUSE_ON_FATAL_EXCEPTION 1 | |
126 | ||
127 | // Set this to 1 to be able to generate a human-readable (unlike | |
128 | // machine-readable minidump created by wxCrashReport::Generate()) stack back | |
129 | // trace when your program crashes using wxStackWalker | |
130 | // | |
131 | // Default is 1 if supported by the compiler. | |
132 | // | |
133 | // Recommended setting: 1, set to 0 if your programs never crash | |
134 | #define wxUSE_STACKWALKER 1 | |
135 | ||
136 | // Set this to 1 to compile in wxDebugReport class which allows you to create | |
137 | // and optionally upload to your web site a debug report consisting of back | |
138 | // trace of the crash (if wxUSE_STACKWALKER == 1) and other information. | |
139 | // | |
140 | // Default is 1 if supported by the compiler. | |
141 | // | |
142 | // Recommended setting: 1, it is compiled into a separate library so there | |
143 | // is no overhead if you don't use it | |
144 | #define wxUSE_DEBUGREPORT 1 | |
145 | ||
146 | // ---------------------------------------------------------------------------- | |
147 | // Unicode support | |
148 | // ---------------------------------------------------------------------------- | |
149 | ||
150 | // Set wxUSE_UNICODE to 1 to compile wxWidgets in Unicode mode: wxChar will be | |
151 | // defined as wchar_t, wxString will use Unicode internally. If you set this | |
152 | // to 1, you must use wxT() macro for all literal strings in the program. | |
153 | // | |
154 | // Unicode is currently only fully supported under Windows NT/2000/XP | |
155 | // (Windows 9x doesn't support it and the programs compiled in Unicode mode | |
156 | // will not run under 9x -- but see wxUSE_UNICODE_MSLU below). | |
157 | // | |
158 | // Default is 0 | |
159 | // | |
160 | // Recommended setting: 0 (unless you only plan to use Windows NT/2000/XP) | |
161 | #ifndef wxUSE_UNICODE | |
162 | #define wxUSE_UNICODE 0 | |
163 | #endif | |
164 | ||
165 | // Setting wxUSE_WCHAR_T to 1 gives you some degree of Unicode support without | |
166 | // compiling the program in Unicode mode. More precisely, it will be possible | |
167 | // to construct wxString from a wide (Unicode) string and convert any wxString | |
168 | // to Unicode. | |
169 | // | |
170 | // Default is 1 | |
171 | // | |
172 | // Recommended setting: 1 | |
173 | #define wxUSE_WCHAR_T 1 | |
174 | ||
175 | // ---------------------------------------------------------------------------- | |
176 | // global features | |
177 | // ---------------------------------------------------------------------------- | |
178 | ||
179 | // Compile library in exception-safe mode? If set to 1, the library will try to | |
180 | // behave correctly in presence of exceptions (even though it still will not | |
181 | // use the exceptions itself) and notify the user code about any unhandled | |
182 | // exceptions. If set to 0, propagation of the exceptions through the library | |
183 | // code will lead to undefined behaviour -- but the code itself will be | |
184 | // slightly smaller and faster. | |
185 | // | |
186 | // Note that like wxUSE_THREADS this option is automatically set to 0 if | |
187 | // wxNO_EXCEPTIONS is defined. | |
188 | // | |
189 | // Default is 1 | |
190 | // | |
191 | // Recommended setting: depends on whether you intend to use C++ exceptions | |
192 | // in your own code (1 if you do, 0 if you don't) | |
193 | #define wxUSE_EXCEPTIONS 1 | |
194 | ||
195 | // Set wxUSE_EXTENDED_RTTI to 1 to use extended RTTI | |
196 | // | |
197 | // Default is 0 | |
198 | // | |
199 | // Recommended setting: 0 (this is still work in progress...) | |
200 | #define wxUSE_EXTENDED_RTTI 0 | |
201 | ||
202 | // Set wxUSE_STL to 1 to derive wxList(Foo) and wxArray(Foo) from | |
203 | // std::list<Foo*> and std::vector<Foo*>, with a compatibility interface, | |
204 | // and for wxHashMap to be implemented with templates. | |
205 | // | |
206 | // Default is 0 | |
207 | // | |
208 | // Recommended setting: YMMV | |
209 | #define wxUSE_STL 0 | |
210 | ||
211 | // Support for message/error logging. This includes wxLogXXX() functions and | |
212 | // wxLog and derived classes. Don't set this to 0 unless you really know what | |
213 | // you are doing. | |
214 | // | |
215 | // Default is 1 | |
216 | // | |
217 | // Recommended setting: 1 (always) | |
218 | #define wxUSE_LOG 1 | |
219 | ||
220 | // Recommended setting: 1 | |
221 | #define wxUSE_LOGWINDOW 1 | |
222 | ||
223 | // Recommended setting: 1 | |
224 | #define wxUSE_LOGGUI 1 | |
225 | ||
226 | // Recommended setting: 1 | |
227 | #define wxUSE_LOG_DIALOG 1 | |
228 | ||
229 | // Support for command line parsing using wxCmdLineParser class. | |
230 | // | |
231 | // Default is 1 | |
232 | // | |
233 | // Recommended setting: 1 (can be set to 0 if you don't use the cmd line) | |
234 | #define wxUSE_CMDLINE_PARSER 1 | |
235 | ||
236 | // Support for multithreaded applications: if 1, compile in thread classes | |
237 | // (thread.h) and make the library a bit more thread safe. Although thread | |
238 | // support is quite stable by now, you may still consider recompiling the | |
239 | // library without it if you have no use for it - this will result in a | |
240 | // somewhat smaller and faster operation. | |
241 | // | |
242 | // Notice that if wxNO_THREADS is defined, wxUSE_THREADS is automatically reset | |
243 | // to 0 in wx/chkconf.h, so, for example, if you set USE_THREADS to 0 in | |
244 | // build/msw/config.* file this value will have no effect. | |
245 | // | |
246 | // Default is 1 | |
247 | // | |
248 | // Recommended setting: 0 unless you do plan to develop MT applications | |
249 | #define wxUSE_THREADS 1 | |
250 | ||
251 | // If enabled, compiles wxWidgets streams classes | |
252 | // | |
253 | // wx stream classes are used for image IO, process IO redirection, network | |
254 | // protocols implementation and much more and so disabling this results in a | |
255 | // lot of other functionality being lost. | |
256 | // | |
257 | // Default is 1 | |
258 | // | |
259 | // Recommended setting: 1 as setting it to 0 disables many other things | |
260 | #define wxUSE_STREAMS 1 | |
261 | ||
262 | // Use standard C++ streams if 1 instead of wx streams in some places. If | |
263 | // disabled (default), wx streams are used everywhere and wxWidgets doesn't | |
264 | // depend on the standard streams library. | |
265 | // | |
266 | // Notice that enabling this does not replace wx streams with std streams | |
267 | // everywhere, in a lot of places wx streams are used no matter what. | |
268 | // | |
269 | // Default is 0 | |
270 | // | |
271 | // Recommended setting: 1 if you use the standard streams anyhow and so | |
272 | // dependency on the standard streams library is not a | |
273 | // problem | |
274 | #define wxUSE_STD_IOSTREAM 0 | |
275 | ||
276 | // Enable conversion to standard C++ string if 1. | |
277 | // | |
278 | // Default is 1 for most compilers. | |
279 | // | |
280 | // Currently the Digital Mars and Watcom compilers come without standard C++ | |
281 | // library headers by default, wxUSE_STD_STRING can be set to 1 if you do have | |
282 | // them (e.g. from STLPort). | |
283 | // | |
284 | // VC++ 5.0 does include standard C++ library header, however they produce | |
285 | // many warnings that can't be turned off when compiled at warning level 4. | |
286 | #if defined(__DMC__) || defined(__WATCOMC__) \ | |
287 | || (defined(_MSC_VER) && _MSC_VER < 1200) | |
288 | #define wxUSE_STD_STRING 0 | |
289 | #else | |
290 | #define wxUSE_STD_STRING 1 | |
291 | #endif | |
292 | ||
293 | // Support for positional parameters (e.g. %1$d, %2$s ...) in wxVsnprintf. | |
294 | // Note that if the system's implementation does not support positional | |
295 | // parameters, setting this to 1 forces the use of the wxWidgets implementation | |
296 | // of wxVsnprintf. The standard vsnprintf() supports positional parameters on | |
297 | // many Unix systems but usually doesn't under Windows. | |
298 | // | |
299 | // Positional parameters are very useful when translating a program since using | |
300 | // them in formatting strings allow translators to correctly reorder the | |
301 | // translated sentences. | |
302 | // | |
303 | // Default is 1 | |
304 | // | |
305 | // Recommended setting: 1 if you want to support multiple languages | |
306 | #define wxUSE_PRINTF_POS_PARAMS 1 | |
307 | ||
308 | // ---------------------------------------------------------------------------- | |
309 | // non GUI features selection | |
310 | // ---------------------------------------------------------------------------- | |
311 | ||
312 | // Set wxUSE_LONGLONG to 1 to compile the wxLongLong class. This is a 64 bit | |
313 | // integer which is implemented in terms of native 64 bit integers if any or | |
314 | // uses emulation otherwise. | |
315 | // | |
316 | // This class is required by wxDateTime and so you should enable it if you want | |
317 | // to use wxDateTime. For most modern platforms, it will use the native 64 bit | |
318 | // integers in which case (almost) all of its functions are inline and it | |
319 | // almost does not take any space, so there should be no reason to switch it | |
320 | // off. | |
321 | // | |
322 | // Recommended setting: 1 | |
323 | #define wxUSE_LONGLONG 1 | |
324 | ||
325 | // Set wxUSE_(F)FILE to 1 to compile wx(F)File classes. wxFile uses low level | |
326 | // POSIX functions for file access, wxFFile uses ANSI C stdio.h functions. | |
327 | // | |
328 | // Default is 1 | |
329 | // | |
330 | // Recommended setting: 1 (wxFile is highly recommended as it is required by | |
331 | // i18n code, wxFileConfig and others) | |
332 | #define wxUSE_FILE 1 | |
333 | #define wxUSE_FFILE 1 | |
334 | ||
335 | // Use wxFSVolume class providing access to the configured/active mount points | |
336 | // | |
337 | // Default is 1 | |
338 | // | |
339 | // Recommended setting: 1 (but may be safely disabled if you don't use it) | |
340 | #define wxUSE_FSVOLUME 1 | |
341 | ||
342 | // Use wxStandardPaths class which allows to retrieve some standard locations | |
343 | // in the file system | |
344 | // | |
345 | // Default is 1 | |
346 | // | |
347 | // Recommended setting: 1 (may be disabled to save space, but not much) | |
348 | #define wxUSE_STDPATHS 1 | |
349 | ||
350 | // use wxTextBuffer class: required by wxTextFile | |
351 | #define wxUSE_TEXTBUFFER 1 | |
352 | ||
353 | // use wxTextFile class: requires wxFile and wxTextBuffer, required by | |
354 | // wxFileConfig | |
355 | #define wxUSE_TEXTFILE 1 | |
356 | ||
357 | // i18n support: _() macro, wxLocale class. Requires wxTextFile. | |
358 | #define wxUSE_INTL 1 | |
359 | ||
360 | // Set wxUSE_DATETIME to 1 to compile the wxDateTime and related classes which | |
361 | // allow to manipulate dates, times and time intervals. wxDateTime replaces the | |
362 | // old wxTime and wxDate classes which are still provided for backwards | |
363 | // compatibility (and implemented in terms of wxDateTime). | |
364 | // | |
365 | // Note that this class is relatively new and is still officially in alpha | |
366 | // stage because some features are not yet (fully) implemented. It is already | |
367 | // quite useful though and should only be disabled if you are aiming at | |
368 | // absolutely minimal version of the library. | |
369 | // | |
370 | // Requires: wxUSE_LONGLONG | |
371 | // | |
372 | // Default is 1 | |
373 | // | |
374 | // Recommended setting: 1 | |
375 | #define wxUSE_DATETIME 1 | |
376 | ||
377 | // Set wxUSE_TIMER to 1 to compile wxTimer class | |
378 | // | |
379 | // Default is 1 | |
380 | // | |
381 | // Recommended setting: 1 | |
382 | #define wxUSE_TIMER 1 | |
383 | ||
384 | // Use wxStopWatch clas. | |
385 | // | |
386 | // Default is 1 | |
387 | // | |
388 | // Recommended setting: 1 (needed by wxSocket) | |
389 | #define wxUSE_STOPWATCH 1 | |
390 | ||
391 | // Setting wxUSE_CONFIG to 1 enables the use of wxConfig and related classes | |
392 | // which allow the application to store its settings in the persistent | |
393 | // storage. Setting this to 1 will also enable on-demand creation of the | |
394 | // global config object in wxApp. | |
395 | // | |
396 | // See also wxUSE_CONFIG_NATIVE below. | |
397 | // | |
398 | // Recommended setting: 1 | |
399 | #define wxUSE_CONFIG 1 | |
400 | ||
401 | // If wxUSE_CONFIG is 1, you may choose to use either the native config | |
402 | // classes under Windows (using .INI files under Win16 and the registry under | |
403 | // Win32) or the portable text file format used by the config classes under | |
404 | // Unix. | |
405 | // | |
406 | // Default is 1 to use native classes. Note that you may still use | |
407 | // wxFileConfig even if you set this to 1 - just the config object created by | |
408 | // default for the applications needs will be a wxRegConfig or wxIniConfig and | |
409 | // not wxFileConfig. | |
410 | // | |
411 | // Recommended setting: 1 | |
412 | #define wxUSE_CONFIG_NATIVE 1 | |
413 | ||
414 | // If wxUSE_DIALUP_MANAGER is 1, compile in wxDialUpManager class which allows | |
415 | // to connect/disconnect from the network and be notified whenever the dial-up | |
416 | // network connection is established/terminated. Requires wxUSE_DYNAMIC_LOADER. | |
417 | // | |
418 | // Default is 1. | |
419 | // | |
420 | // Recommended setting: 1 | |
421 | #define wxUSE_DIALUP_MANAGER 1 | |
422 | ||
423 | // Compile in classes for run-time DLL loading and function calling. | |
424 | // Required by wxUSE_DIALUP_MANAGER. | |
425 | // | |
426 | // This setting is for Win32 only | |
427 | // | |
428 | // Default is 1. | |
429 | // | |
430 | // Recommended setting: 1 | |
431 | #define wxUSE_DYNLIB_CLASS 1 | |
432 | ||
433 | // experimental, don't use for now | |
434 | #define wxUSE_DYNAMIC_LOADER 1 | |
435 | ||
436 | // Set to 1 to use socket classes | |
437 | #define wxUSE_SOCKETS 1 | |
438 | ||
439 | // Set to 1 to enable virtual file systems (required by wxHTML) | |
440 | #define wxUSE_FILESYSTEM 1 | |
441 | ||
442 | // Set to 1 to enable virtual ZIP filesystem (requires wxUSE_FILESYSTEM) | |
443 | #define wxUSE_FS_ZIP 1 | |
444 | ||
445 | // Set to 1 to enable virtual archive filesystem (requires wxUSE_FILESYSTEM) | |
446 | #define wxUSE_FS_ARCHIVE 1 | |
447 | ||
448 | // Set to 1 to enable virtual Internet filesystem (requires wxUSE_FILESYSTEM) | |
449 | #define wxUSE_FS_INET 1 | |
450 | ||
451 | // wxArchive classes for accessing archives such as zip and tar | |
452 | #define wxUSE_ARCHIVE_STREAMS 1 | |
453 | ||
454 | // Set to 1 to compile wxZipInput/OutputStream classes. | |
455 | #define wxUSE_ZIPSTREAM 1 | |
456 | ||
457 | // Set to 1 to compile wxTarInput/OutputStream classes. | |
458 | #define wxUSE_TARSTREAM 1 | |
459 | ||
460 | // Set to 1 to compile wxZlibInput/OutputStream classes. Also required by | |
461 | // wxUSE_LIBPNG | |
462 | #define wxUSE_ZLIB 1 | |
463 | ||
464 | // If enabled, the code written by Apple will be used to write, in a portable | |
465 | // way, float on the disk. See extended.c for the license which is different | |
466 | // from wxWidgets one. | |
467 | // | |
468 | // Default is 1. | |
469 | // | |
470 | // Recommended setting: 1 unless you don't like the license terms (unlikely) | |
471 | #define wxUSE_APPLE_IEEE 1 | |
472 | ||
473 | // Joystick support class | |
474 | #define wxUSE_JOYSTICK 1 | |
475 | ||
476 | // wxFontMapper class | |
477 | #define wxUSE_FONTMAP 1 | |
478 | ||
479 | // wxMimeTypesManager class | |
480 | #define wxUSE_MIMETYPE 1 | |
481 | ||
482 | // wxProtocol and related classes: if you want to use either of wxFTP, wxHTTP | |
483 | // or wxURL you need to set this to 1. | |
484 | // | |
485 | // Default is 1. | |
486 | // | |
487 | // Recommended setting: 1 | |
488 | #define wxUSE_PROTOCOL 1 | |
489 | ||
490 | // The settings for the individual URL schemes | |
491 | #define wxUSE_PROTOCOL_FILE 1 | |
492 | #define wxUSE_PROTOCOL_FTP 1 | |
493 | #define wxUSE_PROTOCOL_HTTP 1 | |
494 | ||
495 | // Define this to use wxURL class. | |
496 | #define wxUSE_URL 1 | |
497 | ||
498 | // Define this to use native platform url and protocol support. | |
499 | // Currently valid only for MS-Windows. | |
500 | // Note: if you set this to 1, you can open ftp/http/gopher sites | |
501 | // and obtain a valid input stream for these sites | |
502 | // even when you set wxUSE_PROTOCOL_FTP/HTTP to 0. | |
503 | // Doing so reduces the code size. | |
504 | // | |
505 | // This code is experimental and subject to change. | |
506 | #define wxUSE_URL_NATIVE 0 | |
507 | ||
508 | // Support for wxVariant class used in several places throughout the library, | |
509 | // notably in wxDataViewCtrl API. | |
510 | // | |
511 | // Default is 1. | |
512 | // | |
513 | // Recommended setting: 1 unless you want to reduce the library size as much as | |
514 | // possible in which case setting this to 0 can gain up to 100KB. | |
515 | #define wxUSE_VARIANT 1 | |
516 | ||
517 | // Support for regular expression matching via wxRegEx class: enable this to | |
518 | // use POSIX regular expressions in your code. You need to compile regex | |
519 | // library from src/regex to use it under Windows. | |
520 | // | |
521 | // Default is 0 | |
522 | // | |
523 | // Recommended setting: 1 if your compiler supports it, if it doesn't please | |
524 | // contribute us a makefile for src/regex for it | |
525 | #define wxUSE_REGEX 1 | |
526 | ||
527 | // wxSystemOptions class | |
528 | #define wxUSE_SYSTEM_OPTIONS 1 | |
529 | ||
530 | // wxSound class | |
531 | #define wxUSE_SOUND 1 | |
532 | ||
533 | // Use wxMediaCtrl | |
534 | // | |
535 | // Default is 1. | |
536 | // | |
537 | // Recommended setting: 1 | |
538 | #define wxUSE_MEDIACTRL 1 | |
539 | ||
540 | // Use GStreamer for Unix (req a lot of dependancies) | |
541 | // | |
542 | // Default is 0 | |
543 | // | |
544 | // Recommended setting: 1 (wxMediaCtrl won't work by default without it) | |
545 | #define wxUSE_GSTREAMER 0 | |
546 | ||
547 | // Use wxWidget's XRC XML-based resource system. Recommended. | |
548 | // | |
549 | // Default is 1 | |
550 | // | |
551 | // Recommended setting: 1 (requires wxUSE_XML) | |
552 | #define wxUSE_XRC 1 | |
553 | ||
554 | // XML parsing classes. Note that their API will change in the future, so | |
555 | // using wxXmlDocument and wxXmlNode in your app is not recommended. | |
556 | // | |
557 | // Default is the same as wxUSE_XRC, i.e. 1 by default. | |
558 | // | |
559 | // Recommended setting: 1 (required by XRC) | |
560 | #define wxUSE_XML wxUSE_XRC | |
561 | ||
562 | // Use wxWidget's AUI docking system | |
563 | // | |
564 | // Default is 1 | |
565 | // | |
566 | // Recommended setting: 1 | |
567 | #define wxUSE_AUI 1 | |
568 | ||
569 | ||
570 | // Enable the new wxGraphicsPath and wxGraphicsContext classes for an advanced | |
571 | // 2D drawing API. (Still somewhat experimental) | |
572 | // | |
573 | // Please note that on Windows you will need to link with gdiplus.lib (use | |
574 | // USE_GDIPLUS=1 for makefile builds) and distribute gdiplus.dll with your | |
575 | // application if you want it to be runnable on pre-XP systems. | |
576 | // | |
577 | // Default is 0 | |
578 | // | |
579 | // Recommended setting: 1 | |
580 | #ifndef wxUSE_GRAPHICS_CONTEXT | |
581 | #define wxUSE_GRAPHICS_CONTEXT 0 | |
582 | #endif | |
583 | ||
584 | // ---------------------------------------------------------------------------- | |
585 | // Individual GUI controls | |
586 | // ---------------------------------------------------------------------------- | |
587 | ||
588 | // You must set wxUSE_CONTROLS to 1 if you are using any controls at all | |
589 | // (without it, wxControl class is not compiled) | |
590 | // | |
591 | // Default is 1 | |
592 | // | |
593 | // Recommended setting: 1 (don't change except for very special programs) | |
594 | #define wxUSE_CONTROLS 1 | |
595 | ||
596 | // wxPopupWindow class is a top level transient window. It is currently used | |
597 | // to implement wxTipWindow | |
598 | // | |
599 | // Default is 1 | |
600 | // | |
601 | // Recommended setting: 1 (may be set to 0 if you don't wxUSE_TIPWINDOW) | |
602 | #define wxUSE_POPUPWIN 1 | |
603 | ||
604 | // wxTipWindow allows to implement the custom tooltips, it is used by the | |
605 | // context help classes. Requires wxUSE_POPUPWIN. | |
606 | // | |
607 | // Default is 1 | |
608 | // | |
609 | // Recommended setting: 1 (may be set to 0) | |
610 | #define wxUSE_TIPWINDOW 1 | |
611 | ||
612 | // Each of the settings below corresponds to one wxWidgets control. They are | |
613 | // all switched on by default but may be disabled if you are sure that your | |
614 | // program (including any standard dialogs it can show!) doesn't need them and | |
615 | // if you desperately want to save some space. If you use any of these you must | |
616 | // set wxUSE_CONTROLS as well. | |
617 | // | |
618 | // Default is 1 | |
619 | // | |
620 | // Recommended setting: 1 | |
621 | #define wxUSE_ANIMATIONCTRL 1 // wxAnimationCtrl | |
622 | #define wxUSE_BUTTON 1 // wxButton | |
623 | #define wxUSE_BMPBUTTON 1 // wxBitmapButton | |
624 | #define wxUSE_CALENDARCTRL 1 // wxCalendarCtrl | |
625 | #define wxUSE_CHECKBOX 1 // wxCheckBox | |
626 | #define wxUSE_CHECKLISTBOX 1 // wxCheckListBox (requires wxUSE_OWNER_DRAWN) | |
627 | #define wxUSE_CHOICE 1 // wxChoice | |
628 | #define wxUSE_COLLPANE 1 // wxCollapsiblePane | |
629 | #define wxUSE_COLOURPICKERCTRL 1 // wxColourPickerCtrl | |
630 | #define wxUSE_COMBOBOX 1 // wxComboBox | |
631 | #define wxUSE_DATAVIEWCTRL 1 // wxDataViewCtrl | |
632 | #define wxUSE_DATEPICKCTRL 1 // wxDatePickerCtrl | |
633 | #define wxUSE_DIRPICKERCTRL 1 // wxDirPickerCtrl | |
634 | #define wxUSE_FILEPICKERCTRL 1 // wxFilePickerCtrl | |
635 | #define wxUSE_FONTPICKERCTRL 1 // wxFontPickerCtrl | |
636 | #define wxUSE_GAUGE 1 // wxGauge | |
637 | #define wxUSE_HYPERLINKCTRL 1 // wxHyperlinkCtrl | |
638 | #define wxUSE_LISTBOX 1 // wxListBox | |
639 | #define wxUSE_LISTCTRL 1 // wxListCtrl | |
640 | #define wxUSE_RADIOBOX 1 // wxRadioBox | |
641 | #define wxUSE_RADIOBTN 1 // wxRadioButton | |
642 | #define wxUSE_SCROLLBAR 1 // wxScrollBar | |
643 | #define wxUSE_SEARCHCTRL 1 // wxSearchCtrl | |
644 | #define wxUSE_SLIDER 1 // wxSlider | |
645 | #define wxUSE_SPINBTN 1 // wxSpinButton | |
646 | #define wxUSE_SPINCTRL 1 // wxSpinCtrl | |
647 | #define wxUSE_STATBOX 1 // wxStaticBox | |
648 | #define wxUSE_STATLINE 1 // wxStaticLine | |
649 | #define wxUSE_STATTEXT 1 // wxStaticText | |
650 | #define wxUSE_STATBMP 1 // wxStaticBitmap | |
651 | #define wxUSE_TEXTCTRL 1 // wxTextCtrl | |
652 | #define wxUSE_TOGGLEBTN 1 // requires wxButton | |
653 | #define wxUSE_TREECTRL 1 // wxTreeCtrl | |
654 | ||
655 | // Use a status bar class? Depending on the value of wxUSE_NATIVE_STATUSBAR | |
656 | // below either wxStatusBar95 or a generic wxStatusBar will be used. | |
657 | // | |
658 | // Default is 1 | |
659 | // | |
660 | // Recommended setting: 1 | |
661 | #define wxUSE_STATUSBAR 1 | |
662 | ||
663 | // Two status bar implementations are available under Win32: the generic one | |
664 | // or the wrapper around native control. For native look and feel the native | |
665 | // version should be used. | |
666 | // | |
667 | // Default is 1 for the platforms where native status bar is supported. | |
668 | // | |
669 | // Recommended setting: 1 (there is no advantage in using the generic one) | |
670 | #define wxUSE_NATIVE_STATUSBAR 1 | |
671 | ||
672 | // wxToolBar related settings: if wxUSE_TOOLBAR is 0, don't compile any toolbar | |
673 | // classes at all. Otherwise, use the native toolbar class unless | |
674 | // wxUSE_TOOLBAR_NATIVE is 0. | |
675 | // | |
676 | // Default is 1 for all settings. | |
677 | // | |
678 | // Recommended setting: 1 for wxUSE_TOOLBAR and wxUSE_TOOLBAR_NATIVE. | |
679 | #define wxUSE_TOOLBAR 1 | |
680 | #define wxUSE_TOOLBAR_NATIVE 1 | |
681 | ||
682 | // wxNotebook is a control with several "tabs" located on one of its sides. It | |
683 | // may be used to logically organise the data presented to the user instead of | |
684 | // putting everything in one huge dialog. It replaces wxTabControl and related | |
685 | // classes of wxWin 1.6x. | |
686 | // | |
687 | // Default is 1. | |
688 | // | |
689 | // Recommended setting: 1 | |
690 | #define wxUSE_NOTEBOOK 1 | |
691 | ||
692 | // wxListbook control is similar to wxNotebook but uses wxListCtrl instead of | |
693 | // the tabs | |
694 | // | |
695 | // Default is 1. | |
696 | // | |
697 | // Recommended setting: 1 | |
698 | #define wxUSE_LISTBOOK 1 | |
699 | ||
700 | // wxChoicebook control is similar to wxNotebook but uses wxChoice instead of | |
701 | // the tabs | |
702 | // | |
703 | // Default is 1. | |
704 | // | |
705 | // Recommended setting: 1 | |
706 | #define wxUSE_CHOICEBOOK 1 | |
707 | ||
708 | // wxTreebook control is similar to wxNotebook but uses wxTreeCtrl instead of | |
709 | // the tabs | |
710 | // | |
711 | // Default is 1. | |
712 | // | |
713 | // Recommended setting: 1 | |
714 | #define wxUSE_TREEBOOK 1 | |
715 | ||
716 | // wxToolbook control is similar to wxNotebook but uses wxToolBar instead of | |
717 | // tabs | |
718 | // | |
719 | // Default is 1. | |
720 | // | |
721 | // Recommended setting: 1 | |
722 | #define wxUSE_TOOLBOOK 1 | |
723 | ||
724 | // wxTabDialog is a generic version of wxNotebook but it is incompatible with | |
725 | // the new class. It shouldn't be used in new code. | |
726 | // | |
727 | // Default is 0. | |
728 | // | |
729 | // Recommended setting: 0 (use wxNotebook) | |
730 | #define wxUSE_TAB_DIALOG 0 | |
731 | ||
732 | // wxGrid class | |
733 | // | |
734 | // Default is 1, set to 0 to cut down compilation time and binaries size if you | |
735 | // don't use it. | |
736 | // | |
737 | // Recommended setting: 1 | |
738 | // | |
739 | #define wxUSE_GRID 1 | |
740 | ||
741 | // wxMiniFrame class: a frame with narrow title bar | |
742 | // | |
743 | // Default is 1. | |
744 | // | |
745 | // Recommended setting: 1 (it doesn't cost almost anything) | |
746 | #define wxUSE_MINIFRAME 1 | |
747 | ||
748 | // wxComboCtrl and related classes: combobox with custom popup window and | |
749 | // not necessarily a listbox. | |
750 | // | |
751 | // Default is 1. | |
752 | // | |
753 | // Recommended setting: 1 but can be safely set to 0 except for wxUniv where it | |
754 | // it used by wxComboBox | |
755 | #define wxUSE_COMBOCTRL 1 | |
756 | ||
757 | // wxOwnerDrawnComboBox is a custom combobox allowing to paint the combobox | |
758 | // items. | |
759 | // | |
760 | // Default is 1. | |
761 | // | |
762 | // Recommended setting: 1 but can be safely set to 0, except where it is | |
763 | // needed as a base class for generic wxBitmapComboBox. | |
764 | #define wxUSE_ODCOMBOBOX 1 | |
765 | ||
766 | // wxBitmapComboBox is a combobox that can have images in front of text items. | |
767 | // | |
768 | // Default is 1. | |
769 | // | |
770 | // Recommended setting: 1 but can be safely set to 0 | |
771 | #define wxUSE_BITMAPCOMBOBOX 1 | |
772 | ||
773 | // ---------------------------------------------------------------------------- | |
774 | // Miscellaneous GUI stuff | |
775 | // ---------------------------------------------------------------------------- | |
776 | ||
777 | // wxAcceleratorTable/Entry classes and support for them in wxMenu(Bar) | |
778 | #define wxUSE_ACCEL 1 | |
779 | ||
780 | // Hotkey support (currently Windows only) | |
781 | #define wxUSE_HOTKEY 1 | |
782 | ||
783 | // Use wxCaret: a class implementing a "cursor" in a text control (called caret | |
784 | // under Windows). | |
785 | // | |
786 | // Default is 1. | |
787 | // | |
788 | // Recommended setting: 1 (can be safely set to 0, not used by the library) | |
789 | #define wxUSE_CARET 1 | |
790 | ||
791 | // Use wxDisplay class: it allows enumerating all displays on a system and | |
792 | // their geometries as well as finding the display on which the given point or | |
793 | // window lies. | |
794 | // | |
795 | // Default is 1. | |
796 | // | |
797 | // Recommended setting: 1 if you need it, can be safely set to 0 otherwise | |
798 | #define wxUSE_DISPLAY 1 | |
799 | ||
800 | // Miscellaneous geometry code: needed for Canvas library | |
801 | #define wxUSE_GEOMETRY 1 | |
802 | ||
803 | // Use wxImageList. This class is needed by wxNotebook, wxTreeCtrl and | |
804 | // wxListCtrl. | |
805 | // | |
806 | // Default is 1. | |
807 | // | |
808 | // Recommended setting: 1 (set it to 0 if you don't use any of the controls | |
809 | // enumerated above, then this class is mostly useless too) | |
810 | #define wxUSE_IMAGLIST 1 | |
811 | ||
812 | // Use wxMenu, wxMenuBar, wxMenuItem. | |
813 | // | |
814 | // Default is 1. | |
815 | // | |
816 | // Recommended setting: 1 (can't be disabled under MSW) | |
817 | #define wxUSE_MENUS 1 | |
818 | ||
819 | // Use wxSashWindow class. | |
820 | // | |
821 | // Default is 1. | |
822 | // | |
823 | // Recommended setting: 1 | |
824 | #define wxUSE_SASH 1 | |
825 | ||
826 | // Use wxSplitterWindow class. | |
827 | // | |
828 | // Default is 1. | |
829 | // | |
830 | // Recommended setting: 1 | |
831 | #define wxUSE_SPLITTER 1 | |
832 | ||
833 | // Use wxToolTip and wxWindow::Set/GetToolTip() methods. | |
834 | // | |
835 | // Default is 1. | |
836 | // | |
837 | // Recommended setting: 1 | |
838 | #define wxUSE_TOOLTIPS 1 | |
839 | ||
840 | // wxValidator class and related methods | |
841 | #define wxUSE_VALIDATORS 1 | |
842 | ||
843 | // ---------------------------------------------------------------------------- | |
844 | // common dialogs | |
845 | // ---------------------------------------------------------------------------- | |
846 | ||
847 | // On rare occasions (e.g. using DJGPP) may want to omit common dialogs (e.g. | |
848 | // file selector, printer dialog). Switching this off also switches off the | |
849 | // printing architecture and interactive wxPrinterDC. | |
850 | // | |
851 | // Default is 1 | |
852 | // | |
853 | // Recommended setting: 1 (unless it really doesn't work) | |
854 | #define wxUSE_COMMON_DIALOGS 1 | |
855 | ||
856 | // wxBusyInfo displays window with message when app is busy. Works in same way | |
857 | // as wxBusyCursor | |
858 | #define wxUSE_BUSYINFO 1 | |
859 | ||
860 | // Use single/multiple choice dialogs. | |
861 | // | |
862 | // Default is 1 | |
863 | // | |
864 | // Recommended setting: 1 (used in the library itself) | |
865 | #define wxUSE_CHOICEDLG 1 | |
866 | ||
867 | // Use colour picker dialog | |
868 | // | |
869 | // Default is 1 | |
870 | // | |
871 | // Recommended setting: 1 | |
872 | #define wxUSE_COLOURDLG 1 | |
873 | ||
874 | // wxDirDlg class for getting a directory name from user | |
875 | #define wxUSE_DIRDLG 1 | |
876 | ||
877 | // TODO: setting to choose the generic or native one | |
878 | ||
879 | // Use file open/save dialogs. | |
880 | // | |
881 | // Default is 1 | |
882 | // | |
883 | // Recommended setting: 1 (used in many places in the library itself) | |
884 | #define wxUSE_FILEDLG 1 | |
885 | ||
886 | // Use find/replace dialogs. | |
887 | // | |
888 | // Default is 1 | |
889 | // | |
890 | // Recommended setting: 1 (but may be safely set to 0) | |
891 | #define wxUSE_FINDREPLDLG 1 | |
892 | ||
893 | // Use font picker dialog | |
894 | // | |
895 | // Default is 1 | |
896 | // | |
897 | // Recommended setting: 1 (used in the library itself) | |
898 | #define wxUSE_FONTDLG 1 | |
899 | ||
900 | // Use wxMessageDialog and wxMessageBox. | |
901 | // | |
902 | // Default is 1 | |
903 | // | |
904 | // Recommended setting: 1 (used in the library itself) | |
905 | #define wxUSE_MSGDLG 1 | |
906 | ||
907 | // progress dialog class for lengthy operations | |
908 | #define wxUSE_PROGRESSDLG 1 | |
909 | ||
910 | // support for startup tips (wxShowTip &c) | |
911 | #define wxUSE_STARTUP_TIPS 1 | |
912 | ||
913 | // text entry dialog and wxGetTextFromUser function | |
914 | #define wxUSE_TEXTDLG 1 | |
915 | ||
916 | // number entry dialog | |
917 | #define wxUSE_NUMBERDLG 1 | |
918 | ||
919 | // splash screen class | |
920 | #define wxUSE_SPLASH 1 | |
921 | ||
922 | // wizards | |
923 | #define wxUSE_WIZARDDLG 1 | |
924 | ||
925 | // Compile in wxAboutBox() function showing the standard "About" dialog. | |
926 | // | |
927 | // Default is 1 | |
928 | // | |
929 | // Recommended setting: 1 but can be set to 0 to save some space if you don't | |
930 | // use this function | |
931 | #define wxUSE_ABOUTDLG 1 | |
932 | ||
933 | // ---------------------------------------------------------------------------- | |
934 | // Metafiles support | |
935 | // ---------------------------------------------------------------------------- | |
936 | ||
937 | // Windows supports the graphics format known as metafile which is, though not | |
938 | // portable, is widely used under Windows and so is supported by wxWin (under | |
939 | // Windows only, of course). Win16 (Win3.1) used the so-called "Window | |
940 | // MetaFiles" or WMFs which were replaced with "Enhanced MetaFiles" or EMFs in | |
941 | // Win32 (Win9x, NT, 2000). Both of these are supported in wxWin and, by | |
942 | // default, WMFs will be used under Win16 and EMFs under Win32. This may be | |
943 | // changed by setting wxUSE_WIN_METAFILES_ALWAYS to 1 and/or setting | |
944 | // wxUSE_ENH_METAFILE to 0. You may also set wxUSE_METAFILE to 0 to not compile | |
945 | // in any metafile related classes at all. | |
946 | // | |
947 | // Default is 1 for wxUSE_ENH_METAFILE and 0 for wxUSE_WIN_METAFILES_ALWAYS. | |
948 | // | |
949 | // Recommended setting: default or 0 for everything for portable programs. | |
950 | #define wxUSE_METAFILE 1 | |
951 | #define wxUSE_ENH_METAFILE 1 | |
952 | #define wxUSE_WIN_METAFILES_ALWAYS 0 | |
953 | ||
954 | // ---------------------------------------------------------------------------- | |
955 | // Big GUI components | |
956 | // ---------------------------------------------------------------------------- | |
957 | ||
958 | // Set to 0 to disable MDI support. | |
959 | // | |
960 | // Requires wxUSE_NOTEBOOK under platforms other than MSW. | |
961 | // | |
962 | // Default is 1. | |
963 | // | |
964 | // Recommended setting: 1, can be safely set to 0. | |
965 | #define wxUSE_MDI 1 | |
966 | ||
967 | // Set to 0 to disable document/view architecture | |
968 | #define wxUSE_DOC_VIEW_ARCHITECTURE 1 | |
969 | ||
970 | // Set to 0 to disable MDI document/view architecture | |
971 | // | |
972 | // Requires wxUSE_MDI && wxUSE_DOC_VIEW_ARCHITECTURE | |
973 | #define wxUSE_MDI_ARCHITECTURE 1 | |
974 | ||
975 | // Set to 0 to disable print/preview architecture code | |
976 | #define wxUSE_PRINTING_ARCHITECTURE 1 | |
977 | ||
978 | // wxHTML sublibrary allows to display HTML in wxWindow programs and much, | |
979 | // much more. | |
980 | // | |
981 | // Default is 1. | |
982 | // | |
983 | // Recommended setting: 1 (wxHTML is great!), set to 0 if you want compile a | |
984 | // smaller library. | |
985 | #define wxUSE_HTML 1 | |
986 | ||
987 | // Setting wxUSE_GLCANVAS to 1 enables OpenGL support. You need to have OpenGL | |
988 | // headers and libraries to be able to compile the library with wxUSE_GLCANVAS | |
989 | // set to 1. Note that for some compilers (notably Microsoft Visual C++) you | |
990 | // will need to manually add opengl32.lib and glu32.lib to the list of | |
991 | // libraries linked with your program if you use OpenGL. | |
992 | // | |
993 | // Default is 0. | |
994 | // | |
995 | // Recommended setting: 1 if you intend to use OpenGL, 0 otherwise | |
996 | #define wxUSE_GLCANVAS 0 | |
997 | ||
998 | // wxRichTextCtrl allows editing of styled text. | |
999 | // | |
1000 | // Default is 1. | |
1001 | // | |
1002 | // Recommended setting: 1, set to 0 if you want compile a | |
1003 | // smaller library. | |
1004 | #define wxUSE_RICHTEXT 1 | |
1005 | ||
1006 | // ---------------------------------------------------------------------------- | |
1007 | // Data transfer | |
1008 | // ---------------------------------------------------------------------------- | |
1009 | ||
1010 | // Use wxClipboard class for clipboard copy/paste. | |
1011 | // | |
1012 | // Default is 1. | |
1013 | // | |
1014 | // Recommended setting: 1 | |
1015 | #define wxUSE_CLIPBOARD 1 | |
1016 | ||
1017 | // Use wxDataObject and related classes. Needed for clipboard and OLE drag and | |
1018 | // drop | |
1019 | // | |
1020 | // Default is 1. | |
1021 | // | |
1022 | // Recommended setting: 1 | |
1023 | #define wxUSE_DATAOBJ 1 | |
1024 | ||
1025 | // Use wxDropTarget and wxDropSource classes for drag and drop (this is | |
1026 | // different from "built in" drag and drop in wxTreeCtrl which is always | |
1027 | // available). Requires wxUSE_DATAOBJ. | |
1028 | // | |
1029 | // Default is 1. | |
1030 | // | |
1031 | // Recommended setting: 1 | |
1032 | #define wxUSE_DRAG_AND_DROP 1 | |
1033 | ||
1034 | // Use wxAccessible for enhanced and customisable accessibility. | |
1035 | // Depends on wxUSE_OLE. | |
1036 | // | |
1037 | // Default is 0. | |
1038 | // | |
1039 | // Recommended setting (at present): 0 | |
1040 | #define wxUSE_ACCESSIBILITY 0 | |
1041 | ||
1042 | // ---------------------------------------------------------------------------- | |
1043 | // miscellaneous settings | |
1044 | // ---------------------------------------------------------------------------- | |
1045 | ||
1046 | // wxSingleInstanceChecker class allows to verify at startup if another program | |
1047 | // instance is running (it is only available under Win32) | |
1048 | // | |
1049 | // Default is 1 | |
1050 | // | |
1051 | // Recommended setting: 1 (the class is tiny, disabling it won't save much | |
1052 | // space) | |
1053 | #define wxUSE_SNGLINST_CHECKER 1 | |
1054 | ||
1055 | #define wxUSE_DRAGIMAGE 1 | |
1056 | ||
1057 | #define wxUSE_IPC 1 | |
1058 | // 0 for no interprocess comms | |
1059 | #define wxUSE_HELP 1 | |
1060 | // 0 for no help facility | |
1061 | ||
1062 | // Should we use MS HTML help for wxHelpController? If disabled, neither | |
1063 | // wxCHMHelpController nor wxBestHelpController are available. | |
1064 | // | |
1065 | // Default is 1 under MSW, 0 is always used for the other platforms. | |
1066 | // | |
1067 | // Recommended setting: 1, only set to 0 if you have trouble compiling | |
1068 | // wxCHMHelpController (could be a problem with really ancient compilers) | |
1069 | #define wxUSE_MS_HTML_HELP 1 | |
1070 | ||
1071 | ||
1072 | // Use wxHTML-based help controller? | |
1073 | #define wxUSE_WXHTML_HELP 1 | |
1074 | ||
1075 | #define wxUSE_RESOURCES 0 | |
1076 | // 0 for no wxGetResource/wxWriteResource | |
1077 | #define wxUSE_CONSTRAINTS 1 | |
1078 | // 0 for no window layout constraint system | |
1079 | ||
1080 | #define wxUSE_SPLINES 1 | |
1081 | // 0 for no splines | |
1082 | ||
1083 | #define wxUSE_MOUSEWHEEL 1 | |
1084 | // Include mouse wheel support | |
1085 | ||
1086 | // ---------------------------------------------------------------------------- | |
1087 | // postscript support settings | |
1088 | // ---------------------------------------------------------------------------- | |
1089 | ||
1090 | // Set to 1 for PostScript device context. | |
1091 | #define wxUSE_POSTSCRIPT 0 | |
1092 | ||
1093 | // Set to 1 to use font metric files in GetTextExtent | |
1094 | #define wxUSE_AFM_FOR_POSTSCRIPT 1 | |
1095 | ||
1096 | // ---------------------------------------------------------------------------- | |
1097 | // database classes | |
1098 | // ---------------------------------------------------------------------------- | |
1099 | ||
1100 | // Define 1 to use ODBC classes | |
1101 | #define wxUSE_ODBC 0 | |
1102 | ||
1103 | // For backward compatibility reasons, this parameter now only controls the | |
1104 | // default scrolling method used by cursors. This default behavior can be | |
1105 | // overriden by setting the second param of wxDB::wxDbGetConnection() or | |
1106 | // wxDb() constructor to indicate whether the connection (and any wxDbTable()s | |
1107 | // that use the connection) should support forward only scrolling of cursors, | |
1108 | // or both forward and backward support for backward scrolling cursors is | |
1109 | // dependent on the data source as well as the ODBC driver being used. | |
1110 | #define wxODBC_FWD_ONLY_CURSORS 1 | |
1111 | ||
1112 | // Default is 0. Set to 1 to use the deprecated classes, enum types, function, | |
1113 | // member variables. With a setting of 1, full backward compatibility with the | |
1114 | // 2.0.x release is possible. It is STRONGLY recommended that this be set to 0, | |
1115 | // as future development will be done only on the non-deprecated | |
1116 | // functions/classes/member variables/etc. | |
1117 | #define wxODBC_BACKWARD_COMPATABILITY 0 | |
1118 | ||
1119 | // ---------------------------------------------------------------------------- | |
1120 | // other compiler (mis)features | |
1121 | // ---------------------------------------------------------------------------- | |
1122 | ||
1123 | // Set this to 0 if your compiler can't cope with omission of prototype | |
1124 | // parameters. | |
1125 | // | |
1126 | // Default is 1. | |
1127 | // | |
1128 | // Recommended setting: 1 (should never need to set this to 0) | |
1129 | #define REMOVE_UNUSED_ARG 1 | |
1130 | ||
1131 | // VC++ 4.2 and above allows <iostream> and <iostream.h> but you can't mix | |
1132 | // them. Set to 1 for <iostream.h>, 0 for <iostream>. Note that VC++ 7.1 | |
1133 | // and later doesn't support wxUSE_IOSTREAMH == 1 and so <iostream> will be | |
1134 | // used anyhow. | |
1135 | // | |
1136 | // Default is 1. | |
1137 | // | |
1138 | // Recommended setting: whatever your compiler likes more | |
1139 | #define wxUSE_IOSTREAMH 1 | |
1140 | ||
1141 | // ---------------------------------------------------------------------------- | |
1142 | // image format support | |
1143 | // ---------------------------------------------------------------------------- | |
1144 | ||
1145 | // wxImage supports many different image formats which can be configured at | |
1146 | // compile-time. BMP is always supported, others are optional and can be safely | |
1147 | // disabled if you don't plan to use images in such format sometimes saving | |
1148 | // substantial amount of code in the final library. | |
1149 | // | |
1150 | // Some formats require an extra library which is included in wxWin sources | |
1151 | // which is mentioned if it is the case. | |
1152 | ||
1153 | // Set to 1 for wxImage support (recommended). | |
1154 | #define wxUSE_IMAGE 1 | |
1155 | ||
1156 | // Set to 1 for PNG format support (requires libpng). Also requires wxUSE_ZLIB. | |
1157 | #define wxUSE_LIBPNG 1 | |
1158 | ||
1159 | // Set to 1 for JPEG format support (requires libjpeg) | |
1160 | #define wxUSE_LIBJPEG 1 | |
1161 | ||
1162 | // Set to 1 for TIFF format support (requires libtiff) | |
1163 | #define wxUSE_LIBTIFF 1 | |
1164 | ||
1165 | // Set to 1 for TGA format support (loading only) | |
1166 | #define wxUSE_TGA 1 | |
1167 | ||
1168 | // Set to 1 for GIF format support | |
1169 | #define wxUSE_GIF 1 | |
1170 | ||
1171 | // Set to 1 for PNM format support | |
1172 | #define wxUSE_PNM 1 | |
1173 | ||
1174 | // Set to 1 for PCX format support | |
1175 | #define wxUSE_PCX 1 | |
1176 | ||
1177 | // Set to 1 for IFF format support (Amiga format) | |
1178 | #define wxUSE_IFF 0 | |
1179 | ||
1180 | // Set to 1 for XPM format support | |
1181 | #define wxUSE_XPM 1 | |
1182 | ||
1183 | // Set to 1 for MS Icons and Cursors format support | |
1184 | #define wxUSE_ICO_CUR 1 | |
1185 | ||
1186 | // Set to 1 to compile in wxPalette class | |
1187 | #define wxUSE_PALETTE 1 | |
1188 | ||
1189 | // ---------------------------------------------------------------------------- | |
1190 | // wxUniversal-only options | |
1191 | // ---------------------------------------------------------------------------- | |
1192 | ||
1193 | // Set to 1 to enable compilation of all themes, this is the default | |
1194 | #define wxUSE_ALL_THEMES 1 | |
1195 | ||
1196 | // Set to 1 to enable the compilation of individual theme if wxUSE_ALL_THEMES | |
1197 | // is unset, if it is set these options are not used; notice that metal theme | |
1198 | // uses Win32 one | |
1199 | #define wxUSE_THEME_GTK 0 | |
1200 | #define wxUSE_THEME_METAL 0 | |
1201 | #define wxUSE_THEME_MONO 0 | |
1202 | #define wxUSE_THEME_WIN32 0 | |
1203 | ||
1204 | ||
1205 | /* --- end common options --- */ | |
1206 | ||
1207 | // ---------------------------------------------------------------------------- | |
1208 | // Windows-only settings | |
1209 | // ---------------------------------------------------------------------------- | |
1210 | ||
1211 | // Set wxUSE_UNICODE_MSLU to 1 if you're compiling wxWidgets in Unicode mode | |
1212 | // and want to run your programs under Windows 9x and not only NT/2000/XP. | |
1213 | // This setting enables use of unicows.dll from MSLU (MS Layer for Unicode, see | |
1214 | // http://www.microsoft.com/globaldev/handson/dev/mslu_announce.mspx). Note | |
1215 | // that you will have to modify the makefiles to include unicows.lib import | |
1216 | // library as the first library (see installation instructions in install.txt | |
1217 | // to learn how to do it when building the library or samples). | |
1218 | // | |
1219 | // If your compiler doesn't have unicows.lib, you can get a version of it at | |
1220 | // http://libunicows.sourceforge.net | |
1221 | // | |
1222 | // Default is 0 | |
1223 | // | |
1224 | // Recommended setting: 0 (1 if you want to deploy Unicode apps on 9x systems) | |
1225 | #ifndef wxUSE_UNICODE_MSLU | |
1226 | #define wxUSE_UNICODE_MSLU 0 | |
1227 | #endif | |
1228 | ||
1229 | // Set this to 1 if you want to use wxWidgets and MFC in the same program. This | |
1230 | // will override some other settings (see below) | |
1231 | // | |
1232 | // Default is 0. | |
1233 | // | |
1234 | // Recommended setting: 0 unless you really have to use MFC | |
1235 | #define wxUSE_MFC 0 | |
1236 | ||
1237 | // Set this to 1 for generic OLE support: this is required for drag-and-drop, | |
1238 | // clipboard, OLE Automation. Only set it to 0 if your compiler is very old and | |
1239 | // can't compile/doesn't have the OLE headers. | |
1240 | // | |
1241 | // Default is 1. | |
1242 | // | |
1243 | // Recommended setting: 1 | |
1244 | #define wxUSE_OLE 1 | |
1245 | ||
1246 | // Set this to 1 to enable wxAutomationObject class. | |
1247 | // | |
1248 | // Default is 1. | |
1249 | // | |
1250 | // Recommended setting: 1 if you need to control other applications via OLE | |
1251 | // Automation, can be safely set to 0 otherwise | |
1252 | #define wxUSE_OLE_AUTOMATION 1 | |
1253 | ||
1254 | // Set this to 1 to enable wxActiveXContainer class allowing to embed OLE | |
1255 | // controls in wx. | |
1256 | // | |
1257 | // Default is 1. | |
1258 | // | |
1259 | // Recommended setting: 1, required by wxMediaCtrl | |
1260 | #define wxUSE_ACTIVEX 1 | |
1261 | ||
1262 | // wxDC cacheing implementation | |
1263 | #define wxUSE_DC_CACHEING 1 | |
1264 | ||
1265 | // Set this to 1 to enable wxDIB class used internally for manipulating | |
1266 | // wxBitmao data. | |
1267 | // | |
1268 | // Default is 1, set it to 0 only if you don't use wxImage neither | |
1269 | // | |
1270 | // Recommended setting: 1 (without it conversion to/from wxImage won't work) | |
1271 | #define wxUSE_WXDIB 1 | |
1272 | ||
1273 | // Set to 0 to disable PostScript print/preview architecture code under Windows | |
1274 | // (just use Windows printing). | |
1275 | #define wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW 1 | |
1276 | ||
1277 | // Set this to 1 to use RICHEDIT controls for wxTextCtrl with style wxTE_RICH | |
1278 | // which allows to put more than ~32Kb of text in it even under Win9x (NT | |
1279 | // doesn't have such limitation). | |
1280 | // | |
1281 | // Default is 1 for compilers which support it | |
1282 | // | |
1283 | // Recommended setting: 1, only set it to 0 if your compiler doesn't have | |
1284 | // or can't compile <richedit.h> | |
1285 | #define wxUSE_RICHEDIT 1 | |
1286 | ||
1287 | // Set this to 1 to use extra features of richedit v2 and later controls | |
1288 | // | |
1289 | // Default is 1 for compilers which support it | |
1290 | // | |
1291 | // Recommended setting: 1 | |
1292 | #define wxUSE_RICHEDIT2 1 | |
1293 | ||
1294 | // Set this to 1 to enable support for the owner-drawn menu and listboxes. This | |
1295 | // is required by wxUSE_CHECKLISTBOX. | |
1296 | // | |
1297 | // Default is 1. | |
1298 | // | |
1299 | // Recommended setting: 1, set to 0 for a small library size reduction | |
1300 | #define wxUSE_OWNER_DRAWN 1 | |
1301 | ||
1302 | // Set to 1 to compile MS Windows XP theme engine support | |
1303 | #define wxUSE_UXTHEME 1 | |
1304 | ||
1305 | // Set to 1 to auto-adapt to MS Windows XP themes where possible | |
1306 | // (notably, wxNotebook pages) | |
1307 | #define wxUSE_UXTHEME_AUTO 1 | |
1308 | ||
1309 | // Set to 1 to use InkEdit control (Tablet PC), if available | |
1310 | #define wxUSE_INKEDIT 0 | |
1311 | ||
1312 | // ---------------------------------------------------------------------------- | |
1313 | // Generic versions of native controls | |
1314 | // ---------------------------------------------------------------------------- | |
1315 | ||
1316 | // Set this to 1 to be able to use wxDatePickerCtrlGeneric in addition to the | |
1317 | // native wxDatePickerCtrl | |
1318 | // | |
1319 | // Default is 0. | |
1320 | // | |
1321 | // Recommended setting: 0, this is mainly used for testing | |
1322 | #define wxUSE_DATEPICKCTRL_GENERIC 0 | |
1323 | ||
1324 | // ---------------------------------------------------------------------------- | |
1325 | // Crash debugging helpers | |
1326 | // ---------------------------------------------------------------------------- | |
1327 | ||
1328 | // Set this to 1 to be able to use wxCrashReport::Generate() to create mini | |
1329 | // dumps of your program when it crashes (or at any other moment) | |
1330 | // | |
1331 | // Default is 1 if supported by the compiler (VC++ and recent BC++ only). | |
1332 | // | |
1333 | // Recommended setting: 1, set to 0 if your programs never crash | |
1334 | #define wxUSE_CRASHREPORT 1 | |
1335 | ||
1336 | // ---------------------------------------------------------------------------- | |
1337 | // obsolete settings | |
1338 | // ---------------------------------------------------------------------------- | |
1339 | ||
1340 | // NB: all settings in this section are obsolete and should not be used/changed | |
1341 | // at all, they will disappear | |
1342 | ||
1343 | // Define 1 to use bitmap messages. | |
1344 | #define wxUSE_BITMAP_MESSAGE 1 | |
1345 | ||
1346 | #endif // _WX_SETUP_H_ | |
1347 |