[wxWidgets.git] / utils / wxPython / src / Makefile.pre.in

# Universal Unix Makefile for Python extensions
# =============================================

# Short Instructions
# ------------------

# 1. Build and install Python (1.5 or newer).
# 2. "make -f Makefile.pre.in boot"
# 3. "make"
# You should now have a shared library.

# Long Instructions
# -----------------

# Build *and install* the basic Python 1.5 distribution.  See the
# Python README for instructions.  (This version of Makefile.pre.in
# only withs with Python 1.5, alpha 3 or newer.)

# Create a file Setup.in for your extension.  This file follows the
# format of the Modules/Setup.in file; see the instructions there.
# For a simple module called "spam" on file "spammodule.c", it can
# contain a single line:
#   spam spammodule.c
# You can build as many modules as you want in the same directory --
# just have a separate line for each of them in the Setup.in file.

# If you want to build your extension as a shared library, insert a
# line containing just the string
#   *shared*
# at the top of your Setup.in file.

# Note that the build process copies Setup.in to Setup, and then works
# with Setup.  It doesn't overwrite Setup when Setup.in is changed, so
# while you're in the process of debugging your Setup.in file, you may
# want to edit Setup instead, and copy it back to Setup.in later.
# (All this is done so you can distribute your extension easily and
# someone else can select the modules they actually want to build by
# commenting out lines in the Setup file, without editing the
# original.  Editing Setup is also used to specify nonstandard
# locations for include or library files.)

# Copy this file (Misc/Makefile.pre.in) to the directory containing
# your extension.

# Run "make -f Makefile.pre.in boot".  This creates Makefile
# (producing Makefile.pre and sedscript as intermediate files) and
# config.c, incorporating the values for sys.prefix, sys.exec_prefix
# and sys.version from the installed Python binary.  For this to work,
# the python binary must be on your path.  If this fails, try
#   make -f Makefile.pre.in Makefile VERSION=1.5 installdir=<prefix>
# where <prefix> is the prefix used to install Python for installdir
# (and possibly similar for exec_installdir=<exec_prefix>).

# Note: "make boot" implies "make clobber" -- it assumes that when you
# bootstrap you may have changed platforms so it removes all previous
# output files.

# If you are building your extension as a shared library (your
# Setup.in file starts with *shared*), run "make" or "make sharedmods"
# to build the shared library files.  If you are building a statically
# linked Python binary (the only solution of your platform doesn't
# support shared libraries, and sometimes handy if you want to
# distribute or install the resulting Python binary), run "make
# python".

# Note: Each time you edit Makefile.pre.in or Setup, you must run
# "make Makefile" before running "make".

# Hint: if you want to use VPATH, you can start in an empty
# subdirectory and say (e.g.):
#   make -f ../Makefile.pre.in boot srcdir=.. VPATH=..


# === Bootstrap variables (edited through "make boot") ===

# The prefix used by "make inclinstall libainstall" of core python
installdir=	/usr/local

# The exec_prefix used by the same
exec_installdir=$(installdir)

# Source directory and VPATH in case you want to use VPATH.
# (You will have to edit these two lines yourself -- there is no
# automatic support as the Makefile is not generated by
# config.status.)
srcdir=		.
VPATH=		.

# === Variables that you may want to customize (rarely) ===

# (Static) build target
TARGET=		python

# Installed python binary (used only by boot target)
PYTHON=		python

# Add more -I and -D options here
CFLAGS=		$(OPT) -I$(INCLUDEPY) -I$(EXECINCLUDEPY) $(DEFS)

# These two variables can be set in Setup to merge extensions.
# See example[23].
BASELIB=
BASESETUP=

# === Variables set by makesetup ===

MODOBJS=	_MODOBJS_
MODLIBS=	_MODLIBS_

# === Definitions added by makesetup ===

# === Variables from configure (through sedscript) ===

VERSION=	@VERSION@
CC=		@CC@
LINKCC=		@LINKCC@
SGI_ABI=	@SGI_ABI@
OPT=		@OPT@
LDFLAGS=	@LDFLAGS@
LDLAST=		@LDLAST@
DEFS=		@DEFS@
LIBS=		@LIBS@
LIBM=		@LIBM@
LIBC=		@LIBC@
RANLIB=		@RANLIB@
MACHDEP=	@MACHDEP@
SO=		@SO@
LDSHARED=	@LDSHARED@
CCSHARED=	@CCSHARED@
LINKFORSHARED=	@LINKFORSHARED@
#@SET_CCC@

# Install prefix for architecture-independent files
prefix=		/usr/local

# Install prefix for architecture-dependent files
exec_prefix=	$(prefix)

# === Fixed definitions ===

# Shell used by make (some versions default to the login shell, which is bad)
SHELL=		/bin/sh

# Expanded directories
BINDIR=		$(exec_installdir)/bin
LIBDIR=		$(exec_prefix)/lib
MANDIR=		$(installdir)/man
INCLUDEDIR=	$(installdir)/include
SCRIPTDIR=	$(prefix)/lib

# Detailed destination directories
BINLIBDEST=	$(LIBDIR)/python$(VERSION)
LIBDEST=	$(SCRIPTDIR)/python$(VERSION)
INCLUDEPY=	$(INCLUDEDIR)/python$(VERSION)
EXECINCLUDEPY=	$(exec_installdir)/include/python$(VERSION)
LIBP=		$(exec_installdir)/lib/python$(VERSION)
DESTSHARED=	$(BINLIBDEST)/site-packages

LIBPL=		$(LIBP)/config

PYTHONLIBS=	$(LIBPL)/libpython$(VERSION).a

MAKESETUP=	$(LIBPL)/makesetup
MAKEFILE=	$(LIBPL)/Makefile
CONFIGC=	$(LIBPL)/config.c
CONFIGCIN=	$(LIBPL)/config.c.in
SETUP=		$(LIBPL)/Setup

SYSLIBS=	$(LIBM) $(LIBC)

ADDOBJS=	$(LIBPL)/python.o config.o

# Portable install script (configure doesn't always guess right)
INSTALL=	$(LIBPL)/install-sh -c
# Shared libraries must be installed with executable mode on some systems;
# rather than figuring out exactly which, we always give them executable mode.
# Also, making them read-only seems to be a good idea...
INSTALL_SHARED=	${INSTALL} -m 555

#---------------------------------------------------
# Possibly change some definintions for C++
ifdef MY_LDSHARED
LDSHARED=$(MY_LDSHARED)
endif
ifdef MY_LINKCC
LINKCC=$(MY_LINKCC)
endif


# === Fixed rules ===

# Default target.  This builds shared libraries only
default:	sharedmods

# Build everything
all:		static sharedmods

# Build shared libraries from our extension modules
sharedmods:	$(SHAREDMODS)

# Build a static Python binary containing our extension modules
static:		$(TARGET)
$(TARGET):	$(ADDOBJS) lib.a $(PYTHONLIBS) Makefile $(BASELIB)
		$(LINKCC) $(LDFLAGS) $(LINKFORSHARED) \
		 $(ADDOBJS) lib.a $(PYTHONLIBS) \
		 $(LINKPATH) $(BASELIB) $(MODLIBS) $(LIBS) $(SYSLIBS) \
		 -o $(TARGET) $(LDLAST)

#------------------------------------------------------------------------
#------------------------------------------------------------------------
# This is a default version of the install target for wxPython.  It just
# redirects to wxInstall below...

install:	wxInstall

#install:	sharedmods
#		if test ! -d $(DESTSHARED) ; then \
#			mkdir $(DESTSHARED) ; else true ; fi
#		-for i in X $(SHAREDMODS); do \
#			if test $$i != X; \
#			then $(INSTALL_SHARED) $$i $(DESTSHARED)/$$i; \
#			fi; \
#		done


# Build the library containing our extension modules
lib.a:		$(MODOBJS)
		-rm -f lib.a
		ar cr lib.a $(MODOBJS)
		-$(RANLIB) lib.a

# This runs makesetup *twice* to use the BASESETUP definition from Setup
config.c Makefile:	Makefile.pre Setup $(BASESETUP) $(MAKESETUP)
		$(MAKESETUP) \
		 -m Makefile.pre -c $(CONFIGCIN) Setup -n $(BASESETUP) $(SETUP)
		$(MAKE) -f Makefile do-it-again

# Internal target to run makesetup for the second time
do-it-again:
		$(MAKESETUP) \
		 -m Makefile.pre -c $(CONFIGCIN) Setup -n $(BASESETUP) $(SETUP)

# Make config.o from the config.c created by makesetup
config.o:	config.c
		$(CC) $(CFLAGS) -c config.c

# Setup is copied from Setup.in *only* if it doesn't yet exist
Setup:
		cp Setup.in Setup

# Make the intermediate Makefile.pre from Makefile.pre.in
Makefile.pre: Makefile.pre.in sedscript
		sed -f sedscript Makefile.pre.in >Makefile.pre

# Shortcuts to make the sed arguments on one line
P=prefix
E=exec_prefix
H=Generated automatically from Makefile.pre.in by sedscript.
L=LINKFORSHARED

# Make the sed script used to create Makefile.pre from Makefile.pre.in
sedscript:	$(MAKEFILE)
	sed -n \
	 -e '1s/.*/1i\\/p' \
	 -e '2s%.*%# $H%p' \
	 -e '/^VERSION=/s/^VERSION=[ 	]*\(.*\)/s%@VERSION[@]%\1%/p' \
	 -e '/^CC=/s/^CC=[ 	]*\(.*\)/s%@CC[@]%\1%/p' \
	 -e '/^CCC=/s/^CCC=[ 	]*\(.*\)/s%#@SET_CCC[@]%CCC=\1%/p' \
	 -e '/^LINKCC=/s/^LINKCC=[ 	]*\(.*\)/s%@LINKCC[@]%\1%/p' \
	 -e '/^OPT=/s/^OPT=[ 	]*\(.*\)/s%@OPT[@]%\1%/p' \
	 -e '/^LDFLAGS=/s/^LDFLAGS=[ 	]*\(.*\)/s%@LDFLAGS[@]%\1%/p' \
	 -e '/^DEFS=/s/^DEFS=[ 	]*\(.*\)/s%@DEFS[@]%\1%/p' \
	 -e '/^LIBS=/s/^LIBS=[ 	]*\(.*\)/s%@LIBS[@]%\1%/p' \
	 -e '/^LIBM=/s/^LIBM=[ 	]*\(.*\)/s%@LIBM[@]%\1%/p' \
	 -e '/^LIBC=/s/^LIBC=[ 	]*\(.*\)/s%@LIBC[@]%\1%/p' \
	 -e '/^RANLIB=/s/^RANLIB=[ 	]*\(.*\)/s%@RANLIB[@]%\1%/p' \
	 -e '/^MACHDEP=/s/^MACHDEP=[ 	]*\(.*\)/s%@MACHDEP[@]%\1%/p' \
	 -e '/^SO=/s/^SO=[ 	]*\(.*\)/s%@SO[@]%\1%/p' \
	 -e '/^LDSHARED=/s/^LDSHARED=[ 	]*\(.*\)/s%@LDSHARED[@]%\1%/p' \
	 -e '/^CCSHARED=/s/^CCSHARED=[ 	]*\(.*\)/s%@CCSHARED[@]%\1%/p' \
	 -e '/^$L=/s/^$L=[ 	]*\(.*\)/s%@$L[@]%\1%/p' \
	 -e '/^$P=/s/^$P=\(.*\)/s%^$P=.*%$P=\1%/p' \
	 -e '/^$E=/s/^$E=\(.*\)/s%^$E=.*%$E=\1%/p' \
	 $(MAKEFILE) >sedscript
	echo "/^#@SET_CCC@/d" >>sedscript
	echo "/^installdir=/s%=.*%=	$(installdir)%" >>sedscript
	echo "/^exec_installdir=/s%=.*%=$(exec_installdir)%" >>sedscript
	echo "/^srcdir=/s%=.*%=		$(srcdir)%" >>sedscript
	echo "/^VPATH=/s%=.*%=		$(VPATH)%" >>sedscript
	echo "/^LINKPATH=/s%=.*%=	$(LINKPATH)%" >>sedscript
	echo "/^BASELIB=/s%=.*%=	$(BASELIB)%" >>sedscript
	echo "/^BASESETUP=/s%=.*%=	$(BASESETUP)%" >>sedscript

# Bootstrap target
boot:	clobber
	VERSION=`$(PYTHON) -c "import sys; print sys.version[:3]"`; \
	installdir=`$(PYTHON) -c "import sys; print sys.prefix"`; \
	exec_installdir=`$(PYTHON) -c "import sys; print sys.exec_prefix"`; \
	$(MAKE) -f Makefile.pre.in VPATH=$(VPATH) srcdir=$(srcdir) \
		VERSION=$$VERSION \
		installdir=$$installdir \
		exec_installdir=$$exec_installdir \
		Makefile

# Handy target to remove intermediate files and backups
clean:
		-rm -f *.o *~

# Handy target to remove everything that is easily regenerated
clobber:	clean
		-rm -f *.a tags TAGS config.c Makefile.pre $(TARGET) sedscript
		-rm -f *.so *.sl so_locations


# Handy target to remove everything you don't want to distribute
distclean:	clobber
		-rm -f Makefile Setup


#------------------------------------------------------------------------
#------------------------------------------------------------------------
# Custom rules and dependencies added for wxPython
#

WXP_VERSION=2.1b1

SWIGFLAGS=-c++ -shadow -python -dnone -D__WXGTK__ $(SEPARATE)


PYMODULES = $(GENCODEDIR)/wx.py        $(GENCODEDIR)/events.py    \
	    $(GENCODEDIR)/windows.py   $(GENCODEDIR)/misc.py      \
	    $(GENCODEDIR)/gdi.py       $(GENCODEDIR)/mdi.py       \
	    $(GENCODEDIR)/controls.py  $(GENCODEDIR)/controls2.py \
            $(GENCODEDIR)/windows2.py  $(GENCODEDIR)/cmndlgs.py   \
	    $(GENCODEDIR)/stattool.py  $(GENCODEDIR)/frames.py    \
	    $(GENCODEDIR)/windows3.py  __init__.py                \
	    $(GENCODEDIR)/utils.py     $(GENCODEDIR)/image.py     \
	    $(GENCODEDIR)/printfw.py   $(GENCODEDIR)/misc2.py     \
            $(GENCODEDIR)/glcanvas.py


# Implicit rules to run SWIG
$(GENCODEDIR)/%.cpp : %.i
	swig $(SWIGFLAGS) -c -o $@ $<

$(GENCODEDIR)/%.py : %.i
	swig $(SWIGFLAGS) -c -o $@ $<


# This one must leave out the -c flag so we define the whole rule
$(GENCODEDIR)/wx.cpp $(GENCODEDIR)/wx.py : wx.i my_typemaps.i _defs.i _extras.py
	swig $(SWIGFLAGS) -o $(GENCODEDIR)/wx.cpp wx.i


# define some dependencies
$(GENCODEDIR)/windows.cpp   $(GENCODEDIR)/windows.py   : windows.i    my_typemaps.i _defs.i
$(GENCODEDIR)/windows2.cpp  $(GENCODEDIR)/windows2.py  : windows2.i   my_typemaps.i _defs.i
$(GENCODEDIR)/windows3.cpp  $(GENCODEDIR)/windows3.py  : windows3.i   my_typemaps.i _defs.i
$(GENCODEDIR)/events.cpp    $(GENCODEDIR)/events.py    : events.i     my_typemaps.i _defs.i
$(GENCODEDIR)/misc.cpp      $(GENCODEDIR)/misc.py      : misc.i       my_typemaps.i _defs.i
$(GENCODEDIR)/misc2.cpp     $(GENCODEDIR)/misc2.py     : misc2.i      my_typemaps.i _defs.i
$(GENCODEDIR)/gdi.cpp       $(GENCODEDIR)/gdi.py       : gdi.i        my_typemaps.i _defs.i
$(GENCODEDIR)/mdi.cpp       $(GENCODEDIR)/mdi.py       : mdi.i        my_typemaps.i _defs.i
$(GENCODEDIR)/controls.cpp  $(GENCODEDIR)/controls.py  : controls.i   my_typemaps.i _defs.i
$(GENCODEDIR)/controls2.cpp $(GENCODEDIR)/controls2.py : controls2.i  my_typemaps.i _defs.i
$(GENCODEDIR)/cmndlgs.cpp   $(GENCODEDIR)/cmndlgs.py   : cmndlgs.i    my_typemaps.i _defs.i
$(GENCODEDIR)/frames.cpp    $(GENCODEDIR)/frames.py    : frames.i     my_typemaps.i _defs.i
$(GENCODEDIR)/stattool.cpp  $(GENCODEDIR)/stattool.py  : stattool.i   my_typemaps.i _defs.i
$(GENCODEDIR)/image.cpp     $(GENCODEDIR)/image.py     : image.i      my_typemaps.i _defs.i
$(GENCODEDIR)/utils.cpp     $(GENCODEDIR)/utils.py     : utils.i      my_typemaps.i _defs.i
$(GENCODEDIR)/printfw.cpp   $(GENCODEDIR)/printfw.py   : printfw.i    my_typemaps.i _defs.i
$(GENCODEDIR)/glcanvas.cpp  $(GENCODEDIR)/glcanvas.py  : glcanvas.i   my_typemaps.i _defs.i

$(GENCODEDIR)/helpers.cpp:
	ln -s `pwd`/helpers.cpp $@

$(GENCODEDIR)/_glcanvas.cpp:
	-cp $(WXWIN)/utils/glcanvas/$(GENCODEDIR)/glcanvas.cpp $@
	-cp $(WXWIN)/utils/glcanvas/$(GENCODEDIR)/glcanvas.h ./glcanvas.h


wxInstall :	sharedmods $(PYMODULES)
	if test ! -d $(TARGETDIR) ; then \
		mkdir $(TARGETDIR) ; else true ; fi
	if [ "$(SHAREDMODS)" != "" ]; then \
		 chmod 755 $(SHAREDMODS); \
		 cp $(SHAREDMODS) $(TARGETDIR); fi
	-for i in $(PYMODULES); do \
		cp $$i $(TARGETDIR); \
	done
	if [ "$(TARGETDIR)" != ".." ]; then        		\
		mkdir $(TARGETDIR)/lib;            		\
		mkdir $(TARGETDIR)/lib/sizers;     		\
		mkdir $(TARGETDIR)/demo;           		\
		mkdir $(TARGETDIR)/demo/bitmaps;      		\
		cp ../lib/*.py $(TARGETDIR)/lib;   		\
		cp ../lib/sizers/*.py $(TARGETDIR)/lib/sizers;	\
		cp ../demo/*.py $(TARGETDIR)/demo; 		\
		cp ../lib/*.txt $(TARGETDIR)/lib;  		\
		cp ../lib/sizers/*.txt $(TARGETDIR)/lib/sizers;	\
		cp ../demo/*.txt $(TARGETDIR)/demo;		\
		cp ../demo/bitmaps/[a-z]* $(TARGETDIR)/demo/bitmaps;	\
	fi
	if [ "$(TARGETDIR)" != ".." ]; then      \
		python $(LIBDEST)/compileall.py $(TARGETDIR);      \
		python -O $(LIBDEST)/compileall.py $(TARGETDIR);   \
	else                                                       \
		python $(LIBDEST)/compileall.py -l $(TARGETDIR);   \
		python -O $(LIBDEST)/compileall.py -l $(TARGETDIR);\
	fi


lib : libwxPython.a

libwxPython.a : lib.a
	cp $< $@

dist: tgz rpm

tgz:
	cd ../..; wxPython/distrib/maketgz $(WXP_VERSION)

rpm:
	cd ../distrib; ./makerpm $(WXP_VERSION)
Commit	Line	Data
c8c5323c RR	1	# Universal Unix Makefile for Python extensions
	2	# =============================================
	3
	4	# Short Instructions
	5	# ------------------
	6
	7	# 1. Build and install Python (1.5 or newer).
	8	# 2. "make -f Makefile.pre.in boot"
	9	# 3. "make"
	10	# You should now have a shared library.
	11
	12	# Long Instructions
	13	# -----------------
	14
	15	# Build and install the basic Python 1.5 distribution. See the
	16	# Python README for instructions. (This version of Makefile.pre.in
	17	# only withs with Python 1.5, alpha 3 or newer.)
	18
	19	# Create a file Setup.in for your extension. This file follows the
	20	# format of the Modules/Setup.in file; see the instructions there.
	21	# For a simple module called "spam" on file "spammodule.c", it can
	22	# contain a single line:
	23	# spam spammodule.c
	24	# You can build as many modules as you want in the same directory --
	25	# just have a separate line for each of them in the Setup.in file.
	26
	27	# If you want to build your extension as a shared library, insert a
	28	# line containing just the string
	29	# shared
	30	# at the top of your Setup.in file.
	31
	32	# Note that the build process copies Setup.in to Setup, and then works
	33	# with Setup. It doesn't overwrite Setup when Setup.in is changed, so
	34	# while you're in the process of debugging your Setup.in file, you may
	35	# want to edit Setup instead, and copy it back to Setup.in later.
	36	# (All this is done so you can distribute your extension easily and
	37	# someone else can select the modules they actually want to build by
	38	# commenting out lines in the Setup file, without editing the
	39	# original. Editing Setup is also used to specify nonstandard
	40	# locations for include or library files.)
	41
	42	# Copy this file (Misc/Makefile.pre.in) to the directory containing
	43	# your extension.
	44
	45	# Run "make -f Makefile.pre.in boot". This creates Makefile
	46	# (producing Makefile.pre and sedscript as intermediate files) and
	47	# config.c, incorporating the values for sys.prefix, sys.exec_prefix
	48	# and sys.version from the installed Python binary. For this to work,
	49	# the python binary must be on your path. If this fails, try
	50	# make -f Makefile.pre.in Makefile VERSION=1.5 installdir=<prefix>
	51	# where <prefix> is the prefix used to install Python for installdir
	52	# (and possibly similar for exec_installdir=<exec_prefix>).
	53
	54	# Note: "make boot" implies "make clobber" -- it assumes that when you
	55	# bootstrap you may have changed platforms so it removes all previous
	56	# output files.
	57
	58	# If you are building your extension as a shared library (your
	59	# Setup.in file starts with shared), run "make" or "make sharedmods"
	60	# to build the shared library files. If you are building a statically
	61	# linked Python binary (the only solution of your platform doesn't
	62	# support shared libraries, and sometimes handy if you want to
	63	# distribute or install the resulting Python binary), run "make
	64	# python".
65
66	# Note: Each time you edit Makefile.pre.in or Setup, you must run
67	# "make Makefile" before running "make".
68
69	# Hint: if you want to use VPATH, you can start in an empty
70	# subdirectory and say (e.g.):
71	# make -f ../Makefile.pre.in boot srcdir=.. VPATH=..
72
73
74	# === Bootstrap variables (edited through "make boot") ===
75
76	# The prefix used by "make inclinstall libainstall" of core python
77	installdir= /usr/local
78
79	# The exec_prefix used by the same
80	exec_installdir=$(installdir)
81
82	# Source directory and VPATH in case you want to use VPATH.
83	# (You will have to edit these two lines yourself -- there is no
84	# automatic support as the Makefile is not generated by
85	# config.status.)
86	srcdir= .
87	VPATH= .
88
89	# === Variables that you may want to customize (rarely) ===
90
91	# (Static) build target
92	TARGET= python
93
94	# Installed python binary (used only by boot target)
95	PYTHON= python
96
97	# Add more -I and -D options here
98	CFLAGS= $(OPT) -I$(INCLUDEPY) -I$(EXECINCLUDEPY) $(DEFS)
99
100	# These two variables can be set in Setup to merge extensions.
101	# See example[23].
102	BASELIB=
103	BASESETUP=
104
105	# === Variables set by makesetup ===
106
107	MODOBJS= _MODOBJS_
108	MODLIBS= _MODLIBS_
109
110	# === Definitions added by makesetup ===
111
112	# === Variables from configure (through sedscript) ===
113
114	VERSION= @VERSION@
115	CC= @CC@
116	LINKCC= @LINKCC@
117	SGI_ABI= @SGI_ABI@
118	OPT= @OPT@
119	LDFLAGS= @LDFLAGS@
120	LDLAST= @LDLAST@
121	DEFS= @DEFS@
122	LIBS= @LIBS@
123	LIBM= @LIBM@
124	LIBC= @LIBC@
125	RANLIB= @RANLIB@
126	MACHDEP= @MACHDEP@
127	SO= @SO@
128	LDSHARED= @LDSHARED@
129	CCSHARED= @CCSHARED@
130	LINKFORSHARED= @LINKFORSHARED@
131	#@SET_CCC@
132
133	# Install prefix for architecture-independent files
134	prefix= /usr/local
135
136	# Install prefix for architecture-dependent files
137	exec_prefix= $(prefix)
138
139	# === Fixed definitions ===
140
141	# Shell used by make (some versions default to the login shell, which is bad)
142	SHELL= /bin/sh
143
144	# Expanded directories
145	BINDIR= $(exec_installdir)/bin
146	LIBDIR= $(exec_prefix)/lib
147	MANDIR= $(installdir)/man
148	INCLUDEDIR= $(installdir)/include
149	SCRIPTDIR= $(prefix)/lib
150
151	# Detailed destination directories
152	BINLIBDEST= $(LIBDIR)/python$(VERSION)
153	LIBDEST= $(SCRIPTDIR)/python$(VERSION)
154	INCLUDEPY= $(INCLUDEDIR)/python$(VERSION)
155	EXECINCLUDEPY= $(exec_installdir)/include/python$(VERSION)
156	LIBP= $(exec_installdir)/lib/python$(VERSION)
157	DESTSHARED= $(BINLIBDEST)/site-packages
158
159	LIBPL= $(LIBP)/config
160
161	PYTHONLIBS= $(LIBPL)/libpython$(VERSION).a
162
163	MAKESETUP= $(LIBPL)/makesetup
164	MAKEFILE= $(LIBPL)/Makefile
165	CONFIGC= $(LIBPL)/config.c
166	CONFIGCIN= $(LIBPL)/config.c.in
167	SETUP= $(LIBPL)/Setup
168
169	SYSLIBS= $(LIBM) $(LIBC)
170
171	ADDOBJS= $(LIBPL)/python.o config.o
172
173	# Portable install script (configure doesn't always guess right)
174	INSTALL= $(LIBPL)/install-sh -c
175	# Shared libraries must be installed with executable mode on some systems;
176	# rather than figuring out exactly which, we always give them executable mode.
177	# Also, making them read-only seems to be a good idea...
178	INSTALL_SHARED= ${INSTALL} -m 555
179
180	#---------------------------------------------------
181	# Possibly change some definintions for C++
182	ifdef MY_LDSHARED
183	LDSHARED=$(MY_LDSHARED)
184	endif
185	ifdef MY_LINKCC
186	LINKCC=$(MY_LINKCC)
187	endif
188
189
190	# === Fixed rules ===
191
192	# Default target. This builds shared libraries only
193	default: sharedmods
194
195	# Build everything
196	all: static sharedmods
197
198	# Build shared libraries from our extension modules
199	sharedmods: $(SHAREDMODS)
200
201	# Build a static Python binary containing our extension modules
202	static: $(TARGET)
203	$(TARGET): $(ADDOBJS) lib.a $(PYTHONLIBS) Makefile $(BASELIB)
204	$(LINKCC) $(LDFLAGS) $(LINKFORSHARED) \
205	$(ADDOBJS) lib.a $(PYTHONLIBS) \
206	$(LINKPATH) $(BASELIB) $(MODLIBS) $(LIBS) $(SYSLIBS) \
207	-o $(TARGET) $(LDLAST)
208
209	#------------------------------------------------------------------------
210	#------------------------------------------------------------------------
211	# This is a default version of the install target for wxPython. It just
212	# redirects to wxInstall below...
213
214	install: wxInstall
215
216	#install: sharedmods
217	# if test ! -d $(DESTSHARED) ; then \
218	# mkdir $(DESTSHARED) ; else true ; fi
219	# -for i in X $(SHAREDMODS); do \
220	# if test $$i != X; \
221	# then $(INSTALL_SHARED) $$i $(DESTSHARED)/$$i; \
222	# fi; \
223	# done
224
225
226	# Build the library containing our extension modules
227	lib.a: $(MODOBJS)
228	-rm -f lib.a
229	ar cr lib.a $(MODOBJS)
230	-$(RANLIB) lib.a
231
232	# This runs makesetup twice to use the BASESETUP definition from Setup
233	config.c Makefile: Makefile.pre Setup $(BASESETUP) $(MAKESETUP)
234	$(MAKESETUP) \
235	-m Makefile.pre -c $(CONFIGCIN) Setup -n $(BASESETUP) $(SETUP)
236	$(MAKE) -f Makefile do-it-again
237
238	# Internal target to run makesetup for the second time
239	do-it-again:
240	$(MAKESETUP) \
241	-m Makefile.pre -c $(CONFIGCIN) Setup -n $(BASESETUP) $(SETUP)
242
243	# Make config.o from the config.c created by makesetup
244	config.o: config.c
245	$(CC) $(CFLAGS) -c config.c
246
247	# Setup is copied from Setup.in only if it doesn't yet exist
248	Setup:
249	cp Setup.in Setup
250
251	# Make the intermediate Makefile.pre from Makefile.pre.in
252	Makefile.pre: Makefile.pre.in sedscript
253	sed -f sedscript Makefile.pre.in >Makefile.pre
254
255	# Shortcuts to make the sed arguments on one line
256	P=prefix
257	E=exec_prefix
258	H=Generated automatically from Makefile.pre.in by sedscript.
259	L=LINKFORSHARED
260
261	# Make the sed script used to create Makefile.pre from Makefile.pre.in
262	sedscript: $(MAKEFILE)
263	sed -n \
264	-e '1s/.*/1i\\/p' \
265	-e '2s%.*%# $H%p' \
266	-e '/^VERSION=/s/^VERSION=[ ]\(.\)/s%@VERSION[@]%\1%/p' \
267	-e '/^CC=/s/^CC=[ ]\(.\)/s%@CC[@]%\1%/p' \
268	-e '/^CCC=/s/^CCC=[ ]\(.\)/s%#@SET_CCC[@]%CCC=\1%/p' \
269	-e '/^LINKCC=/s/^LINKCC=[ ]\(.\)/s%@LINKCC[@]%\1%/p' \
270	-e '/^OPT=/s/^OPT=[ ]\(.\)/s%@OPT[@]%\1%/p' \
271	-e '/^LDFLAGS=/s/^LDFLAGS=[ ]\(.\)/s%@LDFLAGS[@]%\1%/p' \
272	-e '/^DEFS=/s/^DEFS=[ ]\(.\)/s%@DEFS[@]%\1%/p' \
273	-e '/^LIBS=/s/^LIBS=[ ]\(.\)/s%@LIBS[@]%\1%/p' \
274	-e '/^LIBM=/s/^LIBM=[ ]\(.\)/s%@LIBM[@]%\1%/p' \
275	-e '/^LIBC=/s/^LIBC=[ ]\(.\)/s%@LIBC[@]%\1%/p' \
276	-e '/^RANLIB=/s/^RANLIB=[ ]\(.\)/s%@RANLIB[@]%\1%/p' \
277	-e '/^MACHDEP=/s/^MACHDEP=[ ]\(.\)/s%@MACHDEP[@]%\1%/p' \
278	-e '/^SO=/s/^SO=[ ]\(.\)/s%@SO[@]%\1%/p' \
279	-e '/^LDSHARED=/s/^LDSHARED=[ ]\(.\)/s%@LDSHARED[@]%\1%/p' \
280	-e '/^CCSHARED=/s/^CCSHARED=[ ]\(.\)/s%@CCSHARED[@]%\1%/p' \
281	-e '/^$L=/s/^$L=[ ]\(.\)/s%@$L[@]%\1%/p' \
282	-e '/^$P=/s/^$P=\(.\)/s%^$P=.%$P=\1%/p' \
283	-e '/^$E=/s/^$E=\(.\)/s%^$E=.%$E=\1%/p' \
284	$(MAKEFILE) >sedscript
285	echo "/^#@SET_CCC@/d" >>sedscript
286	echo "/^installdir=/s%=.*%= $(installdir)%" >>sedscript
287	echo "/^exec_installdir=/s%=.*%=$(exec_installdir)%" >>sedscript
288	echo "/^srcdir=/s%=.*%= $(srcdir)%" >>sedscript
289	echo "/^VPATH=/s%=.*%= $(VPATH)%" >>sedscript
290	echo "/^LINKPATH=/s%=.*%= $(LINKPATH)%" >>sedscript
291	echo "/^BASELIB=/s%=.*%= $(BASELIB)%" >>sedscript
292	echo "/^BASESETUP=/s%=.*%= $(BASESETUP)%" >>sedscript
293
294	# Bootstrap target
295	boot: clobber
296	VERSION=`$(PYTHON) -c "import sys; print sys.version[:3]"`; \
297	installdir=`$(PYTHON) -c "import sys; print sys.prefix"`; \
298	exec_installdir=`$(PYTHON) -c "import sys; print sys.exec_prefix"`; \
299	$(MAKE) -f Makefile.pre.in VPATH=$(VPATH) srcdir=$(srcdir) \
300	VERSION=$$VERSION \
301	installdir=$$installdir \
302	exec_installdir=$$exec_installdir \
303	Makefile
304
305	# Handy target to remove intermediate files and backups
306	clean:
307	-rm -f .o ~
308
309	# Handy target to remove everything that is easily regenerated
310	clobber: clean
311	-rm -f *.a tags TAGS config.c Makefile.pre $(TARGET) sedscript
312	-rm -f .so .sl so_locations
313
314
315	# Handy target to remove everything you don't want to distribute
316	distclean: clobber
317	-rm -f Makefile Setup
318
319
320
321
322	#------------------------------------------------------------------------
323	#------------------------------------------------------------------------
324	# Custom rules and dependencies added for wxPython
325	#
326
bb0054cd	327	WXP_VERSION=2.1b1
c8c5323c RR	328
	329	SWIGFLAGS=-c++ -shadow -python -dnone -D__WXGTK__ $(SEPARATE)
	330
	331
d24a34bb RD	332	PYMODULES = $(GENCODEDIR)/wx.py $(GENCODEDIR)/events.py \
	333	$(GENCODEDIR)/windows.py $(GENCODEDIR)/misc.py \
	334	$(GENCODEDIR)/gdi.py $(GENCODEDIR)/mdi.py \
	335	$(GENCODEDIR)/controls.py $(GENCODEDIR)/controls2.py \
	336	$(GENCODEDIR)/windows2.py $(GENCODEDIR)/cmndlgs.py \
	337	$(GENCODEDIR)/stattool.py $(GENCODEDIR)/frames.py \
	338	$(GENCODEDIR)/windows3.py __init__.py \
	339	$(GENCODEDIR)/utils.py $(GENCODEDIR)/image.py \
	340	$(GENCODEDIR)/printfw.py $(GENCODEDIR)/misc2.py \
	341	$(GENCODEDIR)/glcanvas.py
c8c5323c RR	342
	343
	344	# Implicit rules to run SWIG
	345	$(GENCODEDIR)/%.cpp : %.i
	346	swig $(SWIGFLAGS) -c -o $@ $<
	347
	348	$(GENCODEDIR)/%.py : %.i
	349	swig $(SWIGFLAGS) -c -o $@ $<
	350
	351
	352	# This one must leave out the -c flag so we define the whole rule
	353	$(GENCODEDIR)/wx.cpp $(GENCODEDIR)/wx.py : wx.i my_typemaps.i _defs.i _extras.py
	354	swig $(SWIGFLAGS) -o $(GENCODEDIR)/wx.cpp wx.i
	355
	356
	357	# define some dependencies
	358	$(GENCODEDIR)/windows.cpp $(GENCODEDIR)/windows.py : windows.i my_typemaps.i _defs.i
	359	$(GENCODEDIR)/windows2.cpp $(GENCODEDIR)/windows2.py : windows2.i my_typemaps.i _defs.i
	360	$(GENCODEDIR)/windows3.cpp $(GENCODEDIR)/windows3.py : windows3.i my_typemaps.i _defs.i
	361	$(GENCODEDIR)/events.cpp $(GENCODEDIR)/events.py : events.i my_typemaps.i _defs.i
	362	$(GENCODEDIR)/misc.cpp $(GENCODEDIR)/misc.py : misc.i my_typemaps.i _defs.i
bb0054cd	363	$(GENCODEDIR)/misc2.cpp $(GENCODEDIR)/misc2.py : misc2.i my_typemaps.i _defs.i
c8c5323c RR	364	$(GENCODEDIR)/gdi.cpp $(GENCODEDIR)/gdi.py : gdi.i my_typemaps.i _defs.i
	365	$(GENCODEDIR)/mdi.cpp $(GENCODEDIR)/mdi.py : mdi.i my_typemaps.i _defs.i
	366	$(GENCODEDIR)/controls.cpp $(GENCODEDIR)/controls.py : controls.i my_typemaps.i _defs.i
	367	$(GENCODEDIR)/controls2.cpp $(GENCODEDIR)/controls2.py : controls2.i my_typemaps.i _defs.i
	368	$(GENCODEDIR)/cmndlgs.cpp $(GENCODEDIR)/cmndlgs.py : cmndlgs.i my_typemaps.i _defs.i
	369	$(GENCODEDIR)/frames.cpp $(GENCODEDIR)/frames.py : frames.i my_typemaps.i _defs.i
	370	$(GENCODEDIR)/stattool.cpp $(GENCODEDIR)/stattool.py : stattool.i my_typemaps.i _defs.i
	371	$(GENCODEDIR)/image.cpp $(GENCODEDIR)/image.py : image.i my_typemaps.i _defs.i
	372	$(GENCODEDIR)/utils.cpp $(GENCODEDIR)/utils.py : utils.i my_typemaps.i _defs.i
d24a34bb	373	$(GENCODEDIR)/printfw.cpp $(GENCODEDIR)/printfw.py : printfw.i my_typemaps.i _defs.i
c8c5323c RR	374	$(GENCODEDIR)/glcanvas.cpp $(GENCODEDIR)/glcanvas.py : glcanvas.i my_typemaps.i _defs.i
	375
	376	$(GENCODEDIR)/helpers.cpp:
	377	ln -s `pwd`/helpers.cpp $@
	378
	379	$(GENCODEDIR)/_glcanvas.cpp:
	380	-cp $(WXWIN)/utils/glcanvas/$(GENCODEDIR)/glcanvas.cpp $@
	381	-cp $(WXWIN)/utils/glcanvas/$(GENCODEDIR)/glcanvas.h ./glcanvas.h
	382
	383
	384	wxInstall : sharedmods $(PYMODULES)
	385	if test ! -d $(TARGETDIR) ; then \
	386	mkdir $(TARGETDIR) ; else true ; fi
	387	if [ "$(SHAREDMODS)" != "" ]; then \
	388	chmod 755 $(SHAREDMODS); \
	389	cp $(SHAREDMODS) $(TARGETDIR); fi
	390	-for i in $(PYMODULES); do \
	391	cp $$i $(TARGETDIR); \
	392	done
2d9f5597 RD	393	if [ "$(TARGETDIR)" != ".." ]; then \
	394	mkdir $(TARGETDIR)/lib; \
	395	mkdir $(TARGETDIR)/lib/sizers; \
	396	mkdir $(TARGETDIR)/demo; \
	397	mkdir $(TARGETDIR)/demo/bitmaps; \
	398	cp ../lib/*.py $(TARGETDIR)/lib; \
	399	cp ../lib/sizers/*.py $(TARGETDIR)/lib/sizers; \
	400	cp ../demo/*.py $(TARGETDIR)/demo; \
	401	cp ../lib/*.txt $(TARGETDIR)/lib; \
	402	cp ../lib/sizers/*.txt $(TARGETDIR)/lib/sizers; \
	403	cp ../demo/*.txt $(TARGETDIR)/demo; \
	404	cp ../demo/bitmaps/[a-z]* $(TARGETDIR)/demo/bitmaps; \
c8c5323c RR	405	fi
	406	if [ "$(TARGETDIR)" != ".." ]; then \
	407	python $(LIBDEST)/compileall.py $(TARGETDIR); \
	408	python -O $(LIBDEST)/compileall.py $(TARGETDIR); \
	409	else \
	410	python $(LIBDEST)/compileall.py -l $(TARGETDIR); \
	411	python -O $(LIBDEST)/compileall.py -l $(TARGETDIR);\
	412	fi
	413
	414
	415
	416
	417	lib : libwxPython.a
	418
	419	libwxPython.a : lib.a
	420	cp $< $@
	421
	422	dist: tgz rpm
	423
	424	tgz:
	425	cd ../..; wxPython/distrib/maketgz $(WXP_VERSION)
	426
	427	rpm:
	428	cd ../distrib; ./makerpm $(WXP_VERSION)
	429