Added code to show off wxDbGrid (contributed by Paul and Roger Gammans) in wxUSE_NEW_...

[wxWidgets.git] / configure

#! /bin/sh

# From configure.in Id: configure.in






































# Configure paths for GTK+
# Owen Taylor     97-11-3


# Guess values for system-dependent variables and create Makefiles.
# Generated automatically using autoconf version 2.13 
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.

# Defaults:
ac_help=
ac_default_prefix=/usr/local
# Any additions from configure.in:
ac_help="$ac_help
--enable-gui            use GUI classes"
ac_help="$ac_help
  --with-gtk              use GTK+"
ac_help="$ac_help
  --with-motif            use Motif/Lesstif"
ac_help="$ac_help
  --with-mac              use Mac OS X"
ac_help="$ac_help
  --with-wine             use WINE"
ac_help="$ac_help
  --with-cygwin           use Cygwin for MS-Windows"
ac_help="$ac_help
  --with-mingw            use GCC Minimal MS-Windows"
ac_help="$ac_help
  --with-pm               use OS/2 Presentation Manager"
ac_help="$ac_help
  --with-gtk-prefix=PFX   Prefix where GTK is installed"
ac_help="$ac_help
  --with-gtk-exec-prefix=PFX  Exec prefix where GTK is installed"
ac_help="$ac_help
--with-libpng           use libpng (PNG image format)"
ac_help="$ac_help
--with-libjpeg          use libjpeg (JPEG file format)"
ac_help="$ac_help
--with-libtiff          use libtiff (TIFF file format)"
ac_help="$ac_help
--with-freetype         use freetype (font rasterizer)"
ac_help="$ac_help
--with-opengl           use OpenGL (or Mesa)"
ac_help="$ac_help
--with-dmalloc          use dmalloc library (www.letters.com/dmalloc)"
ac_help="$ac_help
--with-zlib             use zlib for LZW compression"
ac_help="$ac_help
--with-odbc             use the IODBC and wxODBC classes"
ac_help="$ac_help
--enable-shared         create shared library code"
ac_help="$ac_help
--enable-burnt_name     create set name in shared library "
ac_help="$ac_help
--enable-optimise       create optimised code"
ac_help="$ac_help
--enable-debug          same as debug_flag and debug_info"
ac_help="$ac_help
--enable-debug_flag     set __WXDEBUG__ flag (recommended for developers!)"
ac_help="$ac_help
--enable-debug_info     create code with debugging information"
ac_help="$ac_help
--enable-debug_gdb      create code with extra GDB debugging information"
ac_help="$ac_help
--enable-debug_cntxt    use wxDebugContext"
ac_help="$ac_help
--enable-mem_tracing    create code with memory tracing"
ac_help="$ac_help
--enable-profile        create code with profiling information"
ac_help="$ac_help
--enable-no_rtti        create code without RTTI information"
ac_help="$ac_help
--enable-no_exceptions  create code without exceptions information"
ac_help="$ac_help
--enable-permissive     compile code disregarding strict ANSI"
ac_help="$ac_help
--enable-no_deps        create code without dependency information"
ac_help="$ac_help
--enable-intl           use internationalization system"
ac_help="$ac_help
--enable-config         use wxConfig (and derived) classes"
ac_help="$ac_help
--enable-sockets        use socket/network classes"
ac_help="$ac_help
--enable-ipc            use interprocess communication (wxSocket etc.)"
ac_help="$ac_help
--enable-dialupman      use dialup network classes"
ac_help="$ac_help
--enable-apple_ieee     use the Apple IEEE codec"
ac_help="$ac_help
--enable-timedate       use date/time classes"
ac_help="$ac_help
--enable-wave           use wxWave class"
ac_help="$ac_help
--enable-fraction       use wxFraction class"
ac_help="$ac_help
--enable-dynlib         use wxLibrary class for DLL loading"
ac_help="$ac_help
--enable-longlong       use wxLongLong class"
ac_help="$ac_help
--enable-geometry       use geometry class"
ac_help="$ac_help
--enable-log            use logging system"
ac_help="$ac_help
--enable-streams        use wxStream etc classes"
ac_help="$ac_help
--enable-file           use wxFile classes"
ac_help="$ac_help
--enable-textfile       use wxTextFile classes"
ac_help="$ac_help
--enable-unicode        compile wxString with Unicode support"
ac_help="$ac_help
--enable-wcsrtombs      use wcsrtombs instead of buggy (GNU libc1/Linux libc5) wcstombs"
ac_help="$ac_help
--enable-wxprintfv      use wxWindows implementation of vprintf()"
ac_help="$ac_help
--enable-std_iostreams  use standard C++ stream classes"
ac_help="$ac_help
--enable-filesystem     use virtual file systems classes"
ac_help="$ac_help
--enable-fs_inet        use virtual HTTP/FTP filesystems"
ac_help="$ac_help
--enable-fs_zip         use virtual ZIP filesystems"
ac_help="$ac_help
--enable-zipstream      use wxZipInputStream"
ac_help="$ac_help
--enable-catch_segvs    catch signals and pass them to wxApp::OnFatalException"
ac_help="$ac_help
--enable-snglinst       use wxSingleInstanceChecker class"
ac_help="$ac_help
--enable-threads        use threads"
ac_help="$ac_help
--enable-serial         use class serialization"
ac_help="$ac_help
--enable-docview        use document view architecture"
ac_help="$ac_help
--enable-help           use help (using external browser at present)"
ac_help="$ac_help
--enable-constraints    use layout-constraints system"
ac_help="$ac_help
--enable-printarch      use printing architecture"
ac_help="$ac_help
--enable-mdi            use multiple document interface architecture"
ac_help="$ac_help
--enable-postscript     use wxPostscriptDC device context (default for gtk+)"
ac_help="$ac_help
--enable-prologio       use Prolog IO library"
ac_help="$ac_help
--enable-resources      use wxWindows resources"
ac_help="$ac_help
--enable-xresources     use X resources for save (default for gtk+)"
ac_help="$ac_help
--enable-clipboard      use wxClipboard classes"
ac_help="$ac_help
--enable-dnd            use Drag'n'Drop classes"
ac_help="$ac_help
--enable-metafile       use win32 metafiles"
ac_help="$ac_help
--enable-wxtree         make wxTree library"
ac_help="$ac_help
--enable-controls       use all usual controls"
ac_help="$ac_help
--enable-accel          use accelerators"
ac_help="$ac_help
--enable-caret          use wxCaret class"
ac_help="$ac_help
--enable-bmpbutton      use wxBitmapButton class"
ac_help="$ac_help
--enable-checkbox       use wxCheckBox class"
ac_help="$ac_help
--enable-checklst       use wxCheckListBox (listbox with checkboxes) class"
ac_help="$ac_help
--enable-choice         use wxChoice class"
ac_help="$ac_help
--enable-combobox       use wxComboBox classes"
ac_help="$ac_help
--enable-gauge          use wxGauge class"
ac_help="$ac_help
--enable-grid           use wxGrid class"
ac_help="$ac_help
--enable-newgrid        use new wxGrid class"
ac_help="$ac_help
--enable-imaglist       use wxImageList class"
ac_help="$ac_help
--enable-listbox        use wxListBox class"
ac_help="$ac_help
--enable-listctrl       use wxListCtrl class"
ac_help="$ac_help
--enable-notebook       use wxNotebook class"
ac_help="$ac_help
--enable-radiobox       use wxRadioBox class"
ac_help="$ac_help
--enable-radiobtn       use wxRadioButton class"
ac_help="$ac_help
--enable-sash           use wxSashWindow class"
ac_help="$ac_help
--enable-scrollbar      use wxScrollBar class and scrollable windows"
ac_help="$ac_help
--enable-slider         use wxSlider class"
ac_help="$ac_help
--enable-spinbtn        use wxSpinButton class"
ac_help="$ac_help
--enable-spinctrl       use wxSpinCtrl class"
ac_help="$ac_help
--enable-splitter       use wxSplitterWindow class"
ac_help="$ac_help
--enable-statbmp        use wxStaticBitmap class"
ac_help="$ac_help
--enable-statbox        use wxStaticBox class"
ac_help="$ac_help
--enable-statline       use wxStaticLine class"
ac_help="$ac_help
--enable-statusbar      use wxStatusBar class"
ac_help="$ac_help
--enable-tabdialog      use wxTabControl class"
ac_help="$ac_help
--enable-togglebtn      use wxToggleButton class"
ac_help="$ac_help
--enable-toolbar        use wxToolBar class"
ac_help="$ac_help
--enable-tbarnative     use native wxToolBar class"
ac_help="$ac_help
--enable-tbarsmpl       use wxToolBarSimple class"
ac_help="$ac_help
--enable-treectrl       use wxTreeCtrl class"
ac_help="$ac_help
--enable-commondlg      use common dialogs (wxDirDialog, wxProgressDialog, wxTextDialog, ...)"
ac_help="$ac_help
--enable-dirdlg         use wxDirDialog"
ac_help="$ac_help
--enable-textdlg        use wxTextDialog"
ac_help="$ac_help
--enable-tipdlg         use startup tips"
ac_help="$ac_help
--enable-progressdlg    use wxProgressDialog"
ac_help="$ac_help
--enable-miniframe      use wxMiniFrame class"
ac_help="$ac_help
--enable-html           use wxHTML sub-library"
ac_help="$ac_help
--enable-tooltips       use wxToolTip class"
ac_help="$ac_help
--enable-splines        use spline drawing code"
ac_help="$ac_help
--enable-validators     use wxValidator and derived classes"
ac_help="$ac_help
--enable-busyinfo       use wxBusyInfo"
ac_help="$ac_help
--enable-joystick       compile in joystick support (Linux only)"
ac_help="$ac_help
--enable-image          use wxImage class"
ac_help="$ac_help
--enable-gif            use gif images (GIF file format)"
ac_help="$ac_help
--enable-pcx            use pcx images (PCX file format)"
ac_help="$ac_help
--enable-pnm            use pnm images (PNM file format)"
ac_help="$ac_help
--enable-xpm            use xpm images (XPM file format)"
ac_help="$ac_help
  --with-gtk-prefix=PFX   Prefix where GTK is installed (optional)"
ac_help="$ac_help
  --with-gtk-exec-prefix=PFX Exec prefix where GTK is installed (optional)"
ac_help="$ac_help
  --disable-gtktest       Do not try to compile and run a test GTK program"
ac_help="$ac_help
  --with-x                use the X Window System"

# Initialize some variables set by options.
# The variables have the same names as the options, with
# dashes changed to underlines.
build=NONE
cache_file=./config.cache
exec_prefix=NONE
host=NONE
no_create=
nonopt=NONE
no_recursion=
prefix=NONE
program_prefix=NONE
program_suffix=NONE
program_transform_name=s,x,x,
silent=
site=
srcdir=
target=NONE
verbose=
x_includes=NONE
x_libraries=NONE
bindir='${exec_prefix}/bin'
sbindir='${exec_prefix}/sbin'
libexecdir='${exec_prefix}/libexec'
datadir='${prefix}/share'
sysconfdir='${prefix}/etc'
sharedstatedir='${prefix}/com'
localstatedir='${prefix}/var'
libdir='${exec_prefix}/lib'
includedir='${prefix}/include'
oldincludedir='/usr/include'
infodir='${prefix}/info'
mandir='${prefix}/man'

# Initialize some other variables.
subdirs=
MFLAGS= MAKEFLAGS=
SHELL=${CONFIG_SHELL-/bin/sh}
# Maximum number of lines to put in a shell here document.
ac_max_here_lines=12

ac_prev=
for ac_option
do

  # If the previous option needs an argument, assign it.
  if test -n "$ac_prev"; then
    eval "$ac_prev=\$ac_option"
    ac_prev=
    continue
  fi

  case "$ac_option" in
  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
  *) ac_optarg= ;;
  esac

  # Accept the important Cygnus configure options, so we can diagnose typos.

  case "$ac_option" in

  -bindir | --bindir | --bindi | --bind | --bin | --bi)
    ac_prev=bindir ;;
  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
    bindir="$ac_optarg" ;;

  -build | --build | --buil | --bui | --bu)
    ac_prev=build ;;
  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
    build="$ac_optarg" ;;

  -cache-file | --cache-file | --cache-fil | --cache-fi \
  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
    ac_prev=cache_file ;;
  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
    cache_file="$ac_optarg" ;;

  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
    ac_prev=datadir ;;
  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
  | --da=*)
    datadir="$ac_optarg" ;;

  -disable-* | --disable-*)
    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
    fi
    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
    eval "enable_${ac_feature}=no" ;;

  -enable-* | --enable-*)
    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
    fi
    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
    case "$ac_option" in
      *=*) ;;
      *) ac_optarg=yes ;;
    esac
    eval "enable_${ac_feature}='$ac_optarg'" ;;

  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
  | --exec | --exe | --ex)
    ac_prev=exec_prefix ;;
  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
  | --exec=* | --exe=* | --ex=*)
    exec_prefix="$ac_optarg" ;;

  -gas | --gas | --ga | --g)
    # Obsolete; use --with-gas.
    with_gas=yes ;;

  -help | --help | --hel | --he)
    # Omit some internal or obsolete options to make the list less imposing.
    # This message is too long to be a string in the A/UX 3.1 sh.
    cat << EOF
Usage: configure [options] [host]
Options: [defaults in brackets after descriptions]
Configuration:
  --cache-file=FILE       cache test results in FILE
  --help                  print this message
  --no-create             do not create output files
  --quiet, --silent       do not print \`checking...' messages
  --version               print the version of autoconf that created configure
Directory and file names:
  --prefix=PREFIX         install architecture-independent files in PREFIX
                          [$ac_default_prefix]
  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
                          [same as prefix]
  --bindir=DIR            user executables in DIR [EPREFIX/bin]
  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
  --datadir=DIR           read-only architecture-independent data in DIR
                          [PREFIX/share]
  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
                          [PREFIX/com]
  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
  --includedir=DIR        C header files in DIR [PREFIX/include]
  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
  --infodir=DIR           info documentation in DIR [PREFIX/info]
  --mandir=DIR            man documentation in DIR [PREFIX/man]
  --srcdir=DIR            find the sources in DIR [configure dir or ..]
  --program-prefix=PREFIX prepend PREFIX to installed program names
  --program-suffix=SUFFIX append SUFFIX to installed program names
  --program-transform-name=PROGRAM
                          run sed PROGRAM on installed program names
EOF
    cat << EOF
Host type:
  --build=BUILD           configure for building on BUILD [BUILD=HOST]
  --host=HOST             configure for HOST [guessed]
  --target=TARGET         configure for TARGET [TARGET=HOST]
Features and packages:
  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
  --x-includes=DIR        X include files are in DIR
  --x-libraries=DIR       X library files are in DIR
EOF
    if test -n "$ac_help"; then
      echo "--enable and --with options recognized:$ac_help"
    fi
    exit 0 ;;

  -host | --host | --hos | --ho)
    ac_prev=host ;;
  -host=* | --host=* | --hos=* | --ho=*)
    host="$ac_optarg" ;;

  -includedir | --includedir | --includedi | --included | --include \
  | --includ | --inclu | --incl | --inc)
    ac_prev=includedir ;;
  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
  | --includ=* | --inclu=* | --incl=* | --inc=*)
    includedir="$ac_optarg" ;;

  -infodir | --infodir | --infodi | --infod | --info | --inf)
    ac_prev=infodir ;;
  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
    infodir="$ac_optarg" ;;

  -libdir | --libdir | --libdi | --libd)
    ac_prev=libdir ;;
  -libdir=* | --libdir=* | --libdi=* | --libd=*)
    libdir="$ac_optarg" ;;

  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
  | --libexe | --libex | --libe)
    ac_prev=libexecdir ;;
  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
  | --libexe=* | --libex=* | --libe=*)
    libexecdir="$ac_optarg" ;;

  -localstatedir | --localstatedir | --localstatedi | --localstated \
  | --localstate | --localstat | --localsta | --localst \
  | --locals | --local | --loca | --loc | --lo)
    ac_prev=localstatedir ;;
  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
    localstatedir="$ac_optarg" ;;

  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
    ac_prev=mandir ;;
  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
    mandir="$ac_optarg" ;;

  -nfp | --nfp | --nf)
    # Obsolete; use --without-fp.
    with_fp=no ;;

  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
  | --no-cr | --no-c)
    no_create=yes ;;

  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
    no_recursion=yes ;;

  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
  | --oldin | --oldi | --old | --ol | --o)
    ac_prev=oldincludedir ;;
  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
    oldincludedir="$ac_optarg" ;;

  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
    ac_prev=prefix ;;
  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
    prefix="$ac_optarg" ;;

  -program-prefix | --program-prefix | --program-prefi | --program-pref \
  | --program-pre | --program-pr | --program-p)
    ac_prev=program_prefix ;;
  -program-prefix=* | --program-prefix=* | --program-prefi=* \
  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
    program_prefix="$ac_optarg" ;;

  -program-suffix | --program-suffix | --program-suffi | --program-suff \
  | --program-suf | --program-su | --program-s)
    ac_prev=program_suffix ;;
  -program-suffix=* | --program-suffix=* | --program-suffi=* \
  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
    program_suffix="$ac_optarg" ;;

  -program-transform-name | --program-transform-name \
  | --program-transform-nam | --program-transform-na \
  | --program-transform-n | --program-transform- \
  | --program-transform | --program-transfor \
  | --program-transfo | --program-transf \
  | --program-trans | --program-tran \
  | --progr-tra | --program-tr | --program-t)
    ac_prev=program_transform_name ;;
  -program-transform-name=* | --program-transform-name=* \
  | --program-transform-nam=* | --program-transform-na=* \
  | --program-transform-n=* | --program-transform-=* \
  | --program-transform=* | --program-transfor=* \
  | --program-transfo=* | --program-transf=* \
  | --program-trans=* | --program-tran=* \
  | --progr-tra=* | --program-tr=* | --program-t=*)
    program_transform_name="$ac_optarg" ;;

  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
  | -silent | --silent | --silen | --sile | --sil)
    silent=yes ;;

  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
    ac_prev=sbindir ;;
  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
  | --sbi=* | --sb=*)
    sbindir="$ac_optarg" ;;

  -sharedstatedir | --sharedstatedir | --sharedstatedi \
  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
  | --sharedst | --shareds | --shared | --share | --shar \
  | --sha | --sh)
    ac_prev=sharedstatedir ;;
  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
  | --sha=* | --sh=*)
    sharedstatedir="$ac_optarg" ;;

  -site | --site | --sit)
    ac_prev=site ;;
  -site=* | --site=* | --sit=*)
    site="$ac_optarg" ;;

  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
    ac_prev=srcdir ;;
  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
    srcdir="$ac_optarg" ;;

  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
  | --syscon | --sysco | --sysc | --sys | --sy)
    ac_prev=sysconfdir ;;
  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
    sysconfdir="$ac_optarg" ;;

  -target | --target | --targe | --targ | --tar | --ta | --t)
    ac_prev=target ;;
  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
    target="$ac_optarg" ;;

  -v | -verbose | --verbose | --verbos | --verbo | --verb)
    verbose=yes ;;

  -version | --version | --versio | --versi | --vers)
    echo "configure generated by autoconf version 2.13"
    exit 0 ;;

  -with-* | --with-*)
    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
    fi
    ac_package=`echo $ac_package| sed 's/-/_/g'`
    case "$ac_option" in
      *=*) ;;
      *) ac_optarg=yes ;;
    esac
    eval "with_${ac_package}='$ac_optarg'" ;;

  -without-* | --without-*)
    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
    fi
    ac_package=`echo $ac_package| sed 's/-/_/g'`
    eval "with_${ac_package}=no" ;;

  --x)
    # Obsolete; use --with-x.
    with_x=yes ;;

  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
  | --x-incl | --x-inc | --x-in | --x-i)
    ac_prev=x_includes ;;
  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
    x_includes="$ac_optarg" ;;

  -x-libraries | --x-libraries | --x-librarie | --x-librari \
  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
    ac_prev=x_libraries ;;
  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
    x_libraries="$ac_optarg" ;;

  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
    ;;

  *)
    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
      echo "configure: warning: $ac_option: invalid host type" 1>&2
    fi
    if test "x$nonopt" != xNONE; then
      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
    fi
    nonopt="$ac_option"
    ;;

  esac
done

if test -n "$ac_prev"; then
  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
fi

trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15

# File descriptor usage:
# 0 standard input
# 1 file creation
# 2 errors and warnings
# 3 some systems may open it to /dev/tty
# 4 used on the Kubota Titan
# 6 checking for... messages and results
# 5 compiler messages saved in config.log
if test "$silent" = yes; then
  exec 6>/dev/null
else
  exec 6>&1
fi
exec 5>./config.log

echo "\
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
" 1>&5

# Strip out --no-create and --no-recursion so they do not pile up.
# Also quote any args containing shell metacharacters.
ac_configure_args=
for ac_arg
do
  case "$ac_arg" in
  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
  | --no-cr | --no-c) ;;
  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
  esac
done

# NLS nuisances.
# Only set these to C if already set.  These must not be set unconditionally
# because not all systems understand e.g. LANG=C (notably SCO).
# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
# Non-C LC_CTYPE values break the ctype check.
if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi

# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -rf conftest* confdefs.h
# AIX cpp loses on an empty file, so make sure it contains at least a newline.
echo > confdefs.h

# A filename unique to this package, relative to the directory that
# configure is in, which we can look for to find out if srcdir is correct.
ac_unique_file=wx-config.in

# Find the source files, if location was not specified.
if test -z "$srcdir"; then
  ac_srcdir_defaulted=yes
  # Try the directory containing this script, then its parent.
  ac_prog=$0
  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
  srcdir=$ac_confdir
  if test ! -r $srcdir/$ac_unique_file; then
    srcdir=..
  fi
else
  ac_srcdir_defaulted=no
fi
if test ! -r $srcdir/$ac_unique_file; then
  if test "$ac_srcdir_defaulted" = yes; then
    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
  else
    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
  fi
fi
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`

# Prefer explicitly selected file to automatically selected ones.
if test -z "$CONFIG_SITE"; then
  if test "x$prefix" != xNONE; then
    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
  else
    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
  fi
fi
for ac_site_file in $CONFIG_SITE; do
  if test -r "$ac_site_file"; then
    echo "loading site script $ac_site_file"
    . "$ac_site_file"
  fi
done

if test -r "$cache_file"; then
  echo "loading cache $cache_file"
  . $cache_file
else
  echo "creating cache $cache_file"
  > $cache_file
fi

ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

ac_exeext=
ac_objext=o
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
    ac_n= ac_c='
' ac_t='	'
  else
    ac_n=-n ac_c= ac_t=
  fi
else
  ac_n= ac_c='\c' ac_t=
fi



ac_aux_dir=
for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
  if test -f $ac_dir/install-sh; then
    ac_aux_dir=$ac_dir
    ac_install_sh="$ac_aux_dir/install-sh -c"
    break
  elif test -f $ac_dir/install.sh; then
    ac_aux_dir=$ac_dir
    ac_install_sh="$ac_aux_dir/install.sh -c"
    break
  fi
done
if test -z "$ac_aux_dir"; then
  { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
fi
ac_config_guess=$ac_aux_dir/config.guess
ac_config_sub=$ac_aux_dir/config.sub
ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.


# Do some error checking and defaulting for the host and target type.
# The inputs are:
#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
#
# The rules are:
# 1. You are not allowed to specify --host, --target, and nonopt at the
#    same time.
# 2. Host defaults to nonopt.
# 3. If nonopt is not specified, then host defaults to the current host,
#    as determined by config.guess.
# 4. Target and build default to nonopt.
# 5. If nonopt is not specified, then target and build default to host.

# The aliases save the names the user supplied, while $host etc.
# will get canonicalized.
case $host---$target---$nonopt in
NONE---*---* | *---NONE---* | *---*---NONE) ;;
*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
esac


# Make sure we can run config.sub.
if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi

echo $ac_n "checking host system type""... $ac_c" 1>&6
echo "configure:870: checking host system type" >&5

host_alias=$host
case "$host_alias" in
NONE)
  case $nonopt in
  NONE)
    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
    fi ;;
  *) host_alias=$nonopt ;;
  esac ;;
esac

host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6

echo $ac_n "checking target system type""... $ac_c" 1>&6
echo "configure:891: checking target system type" >&5

target_alias=$target
case "$target_alias" in
NONE)
  case $nonopt in
  NONE) target_alias=$host_alias ;;
  *) target_alias=$nonopt ;;
  esac ;;
esac

target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$target" 1>&6

echo $ac_n "checking build system type""... $ac_c" 1>&6
echo "configure:909: checking build system type" >&5

build_alias=$build
case "$build_alias" in
NONE)
  case $nonopt in
  NONE) build_alias=$host_alias ;;
  *) build_alias=$nonopt ;;
  esac ;;
esac

build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$build" 1>&6

test "$host_alias" != "$target_alias" &&
  test "$program_prefix$program_suffix$program_transform_name" = \
    NONENONEs,x,x, &&
  program_prefix=${target_alias}-



WX_MAJOR_VERSION_NUMBER=2
WX_MINOR_VERSION_NUMBER=3
WX_RELEASE_NUMBER=1

WX_VERSION=$WX_MAJOR_VERSION_NUMBER.$WX_MINOR_VERSION_NUMBER.$WX_RELEASE_NUMBER
WX_RELEASE=$WX_MAJOR_VERSION_NUMBER.$WX_MINOR_VERSION_NUMBER

WX_CURRENT=0
WX_REVISION=0
WX_AGE=0



USE_UNIX=1
USE_WIN32=0
USE_BEOS=0
USE_MAC=0

USE_LINUX=
USE_SGI=
USE_HPUX=
USE_SYSV=
USE_SVR4=
USE_AIX=
USE_SUN=
USE_SOLARIS=
USE_SUNOS=
USE_ALPHA=
USE_OSF=
USE_BSD=
USE_FREEBSD=
USE_OPENBSD=
USE_NETBSD=
USE_VMS=
USE_ULTRIX=
USE_CYGWIN=
USE_MINGW=
USE_DATA_GENERAL=

NEEDS_D_REENTRANT_FOR_R_FUNCS=0

ALL_TOOLKITS="CYGWIN GTK MINGW MOTIF MAC WINE PM"

DEFAULT_wxUSE_GTK=0
DEFAULT_wxUSE_MOTIF=0
DEFAULT_wxUSE_MSW=0
DEFAULT_wxUSE_MAC=0
DEFAULT_wxUSE_WINE=0
DEFAULT_wxUSE_PM=0

DEFAULT_DEFAULT_wxUSE_GTK=0
DEFAULT_DEFAULT_wxUSE_MOTIF=0
DEFAULT_DEFAULT_wxUSE_MSW=0
DEFAULT_DEFAULT_wxUSE_MAC=0
DEFAULT_DEFAULT_wxUSE_WINE=0
DEFAULT_DEFAULT_wxUSE_PM=0

PROGRAM_EXT=

case "${host}" in
  *-hp-hpux* )
    USE_HPUX=1
    DEFAULT_DEFAULT_wxUSE_MOTIF=1
    NEEDS_D_REENTRANT_FOR_R_FUNCS=1
    cat >> confdefs.h <<\EOF
#define __HPUX__ 1
EOF

  ;;
  *-*-linux* )
    USE_LINUX=1
    cat >> confdefs.h <<\EOF
#define __LINUX__ 1
EOF

    TMP=`uname -m`
    if test "x$TMP" = "xalpha"; then
      USE_ALPHA=1
      cat >> confdefs.h <<\EOF
#define __ALPHA__ 1
EOF

    fi
    DEFAULT_DEFAULT_wxUSE_GTK=1
  ;;
  *-*-irix5* | *-*-irix6* )
    USE_SGI=1
    USE_SVR4=1
    cat >> confdefs.h <<\EOF
#define __SGI__ 1
EOF

    cat >> confdefs.h <<\EOF
#define __SVR4__ 1
EOF

    DEFAULT_DEFAULT_wxUSE_MOTIF=1
  ;;
  *-*-solaris2* )
    USE_SUN=1
    USE_SOLARIS=1
    USE_SVR4=1
    cat >> confdefs.h <<\EOF
#define __SUN__ 1
EOF

    cat >> confdefs.h <<\EOF
#define __SOLARIS__ 1
EOF

    cat >> confdefs.h <<\EOF
#define __SVR4__ 1
EOF

    DEFAULT_DEFAULT_wxUSE_MOTIF=1
    NEEDS_D_REENTRANT_FOR_R_FUNCS=1
  ;;
  *-*-sunos4* )
    USE_SUN=1
    USE_SUNOS=1
    USE_BSD=1
    cat >> confdefs.h <<\EOF
#define __SUN__ 1
EOF

    cat >> confdefs.h <<\EOF
#define __SUNOS__ 1
EOF

    cat >> confdefs.h <<\EOF
#define __BSD__ 1
EOF

    DEFAULT_DEFAULT_wxUSE_MOTIF=1
  ;;
  *-*-freebsd*)
    USE_BSD=1
    USE_FREEBSD=1
    cat >> confdefs.h <<\EOF
#define __FREEBSD__ 1
EOF

    cat >> confdefs.h <<\EOF
#define __BSD__ 1
EOF

    DEFAULT_DEFAULT_wxUSE_GTK=1
  ;;
  *-*-openbsd*)
    USE_BSD=1
    USE_OPENBSD=1
    cat >> confdefs.h <<\EOF
#define __FREEBSD__ 1
EOF

    cat >> confdefs.h <<\EOF
#define __OPENBSD__ 1
EOF

    DEFAULT_DEFAULT_wxUSE_GTK=1
  ;;
  *-*-netbsd*)
    USE_BSD=1
    USE_NETBSD=1
    cat >> confdefs.h <<\EOF
#define __FREEBSD__ 1
EOF

    cat >> confdefs.h <<\EOF
#define __NETBSD__ 1
EOF

    DEFAULT_DEFAULT_wxUSE_GTK=1
  ;;
  *-*-osf* )
    USE_ALPHA=1
    USE_OSF=1
    cat >> confdefs.h <<\EOF
#define __ALPHA__ 1
EOF

    cat >> confdefs.h <<\EOF
#define __OSF__ 1
EOF

    DEFAULT_DEFAULT_wxUSE_MOTIF=1
    NEEDS_D_REENTRANT_FOR_R_FUNCS=1
  ;;
  *-*-dgux5* )
    USE_ALPHA=1
    USE_SVR4=1
    cat >> confdefs.h <<\EOF
#define __ALPHA__ 1
EOF

    cat >> confdefs.h <<\EOF
#define __SVR4__ 1
EOF

    DEFAULT_DEFAULT_wxUSE_MOTIF=1
  ;;
  *-*-sysv5* )
    USE_SYSV=1
    USE_SVR4=1
    cat >> confdefs.h <<\EOF
#define __SYSV__ 1
EOF

    cat >> confdefs.h <<\EOF
#define __SVR4__ 1
EOF

    DEFAULT_DEFAULT_wxUSE_MOTIF=1
  ;;
  *-*-aix* )
    USE_AIX=1
    USE_SYSV=1
    USE_SVR4=1
    cat >> confdefs.h <<\EOF
#define __AIX__ 1
EOF

    cat >> confdefs.h <<\EOF
#define __SYSV__ 1
EOF

    cat >> confdefs.h <<\EOF
#define __SVR4__ 1
EOF

    DEFAULT_DEFAULT_wxUSE_MOTIF=1
  ;;

  *-*-cygwin* | *-*-mingw32* )
    USE_UNIX=0
    USE_WIN32=1
    cat >> confdefs.h <<\EOF
#define __WIN32__ 1
EOF

    cat >> confdefs.h <<\EOF
#define __WIN95__ 1
EOF

    cat >> confdefs.h <<\EOF
#define __WINDOWS__ 1
EOF

    cat >> confdefs.h <<\EOF
#define __GNUWIN32__ 1
EOF

    cat >> confdefs.h <<\EOF
#define STRICT 1
EOF

    cat >> confdefs.h <<\EOF
#define WINVER 0x0400
EOF

    PROGRAM_EXT=".exe"
    DEFAULT_DEFAULT_wxUSE_MSW=1
  ;;

  *-pc-os2_emx )
    cat >> confdefs.h <<\EOF
#define __EMX__ 1
EOF

    PROGRAM_EXT=".exe"
    DEFAULT_DEFAULT_wxUSE_PM=1
  ;;

  *-*-darwin* )
    USE_BSD=1
    USE_MAC=1
    cat >> confdefs.h <<\EOF
#define __MAC__ 1
EOF

    cat >> confdefs.h <<\EOF
#define __BSD__ 1
EOF

    cat >> confdefs.h <<\EOF
#define __UNIX__ 1
EOF

    DEFAULT_DEFAULT_wxUSE_MAC=1
  ;;

  *-*-beos* )
        USE_BEOS=1
    cat >> confdefs.h <<\EOF
#define __BEOS__ 1
EOF

  ;;

  *)
    { echo "configure: error: unknown system type ${host}." 1>&2; exit 1; }
esac

if test "$USE_UNIX" = 1 ; then
    wxUSE_UNIX=yes
    cat >> confdefs.h <<\EOF
#define __UNIX__ 1
EOF


    SRC_SUBDIRS="$SRC_SUBDIRS unix"
    INCLUDE_SUBDIRS="$INCLUDE_SUBDIRS unix"
fi

if test "$USE_BEOS" = 1; then
    SRC_SUBDIRS="$SRC_SUBDIRS be"
    INCLUDE_SUBDIRS="$INCLUDE_SUBDIRS be"
fi

if test "$USE_LINUX" = 1; then
  echo $ac_n "checking for gettext in -lc""... $ac_c" 1>&6
echo "configure:1254: checking for gettext in -lc" >&5
ac_lib_var=`echo c'_'gettext | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lc  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 1262 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char gettext();

int main() {
gettext()
; return 0; }
EOF
if { (eval echo configure:1273: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  cat >> confdefs.h <<\EOF
#define wxHAVE_GLIBC2 1
EOF

else
  echo "$ac_t""no" 1>&6
fi

fi




          wx_arg_cache_file="configarg.cache"
          echo "loading argument cache $wx_arg_cache_file"
          rm -f ${wx_arg_cache_file}.tmp
          touch ${wx_arg_cache_file}.tmp
          touch ${wx_arg_cache_file}
        

DEBUG_CONFIGURE=0
if test $DEBUG_CONFIGURE = 1; then
  DEFAULT_wxUSE_THREADS=yes

  DEFAULT_wxUSE_SHARED=yes
  DEFAULT_wxUSE_BURNT_NAME=no
  DEFAULT_wxUSE_OPTIMISE=yes
  DEFAULT_wxUSE_PROFILE=no
  DEFAULT_wxUSE_NO_DEPS=no
  DEFAULT_wxUSE_NO_RTTI=no
  DEFAULT_wxUSE_NO_EXCEPTIONS=no
  DEFAULT_wxUSE_PERMISSIVE=no
  DEFAULT_wxUSE_DEBUG_FLAG=yes
  DEFAULT_wxUSE_DEBUG_INFO=yes
  DEFAULT_wxUSE_DEBUG_GDB=yes
  DEFAULT_wxUSE_MEM_TRACING=no
  DEFAULT_wxUSE_DEBUG_CONTEXT=no
  DEFAULT_wxUSE_DMALLOC=no
  DEFAULT_wxUSE_APPLE_IEEE=no

  DEFAULT_wxUSE_LOG=yes

  DEFAULT_wxUSE_GUI=yes

  DEFAULT_wxUSE_ZLIB=no
  DEFAULT_wxUSE_LIBPNG=no
  DEFAULT_wxUSE_LIBJPEG=no
  DEFAULT_wxUSE_LIBTIFF=no
  DEFAULT_wxUSE_ODBC=no
  DEFAULT_wxUSE_FREETYPE=no
  DEFAULT_wxUSE_OPENGL=no

  DEFAULT_wxUSE_ON_FATAL_EXCEPTION=no
  DEFAULT_wxUSE_SNGLINST_CHECKER=no
  DEFAULT_wxUSE_STD_IOSTREAM=no
  DEFAULT_wxUSE_FILE=no
  DEFAULT_wxUSE_TEXTFILE=no
  DEFAULT_wxUSE_TIMEDATE=no
  DEFAULT_wxUSE_WAVE=no
  DEFAULT_wxUSE_INTL=no
  DEFAULT_wxUSE_CONFIG=no
  DEFAULT_wxUSE_STREAMS=no
  DEFAULT_wxUSE_SOCKETS=no
  DEFAULT_wxUSE_DIALUP_MANAGER=no
  DEFAULT_wxUSE_SERIAL=no
  DEFAULT_wxUSE_JOYSTICK=no
  DEFAULT_wxUSE_DYNLIB_CLASS=no
  DEFAULT_wxUSE_LONGLONG=no
  DEFAULT_wxUSE_GEOMETRY=no

  DEFAULT_wxUSE_AFM_FOR_POSTSCRIPT=no
  DEFAULT_wxUSE_NORMALIZED_PS_FONTS=no
  DEFAULT_wxUSE_POSTSCRIPT=no

  DEFAULT_wxUSE_X_RESOURCES=no
  DEFAULT_wxUSE_CLIPBOARD=no
  DEFAULT_wxUSE_TOOLTIPS=no
  DEFAULT_wxUSE_DRAG_AND_DROP=no
  DEFAULT_wxUSE_SPLINES=no

  DEFAULT_wxUSE_MDI_ARCHITECTURE=no
  DEFAULT_wxUSE_DOC_VIEW_ARCHITECTURE=no
  DEFAULT_wxUSE_PRINTING_ARCHITECTURE=no

  DEFAULT_wxUSE_PROLOGIO=no
  DEFAULT_wxUSE_RESOURCES=no
  DEFAULT_wxUSE_CONSTRAINTS=no
  DEFAULT_wxUSE_IPC=no
  DEFAULT_wxUSE_HELP=no
  DEFAULT_wxUSE_WXTREE=no
  DEFAULT_wxUSE_METAFILE=no

  DEFAULT_wxUSE_COMMONDLGS=no
  DEFAULT_wxUSE_DIRDLG=no
  DEFAULT_wxUSE_TEXTDLG=no
  DEFAULT_wxUSE_STARTUP_TIPS=no
  DEFAULT_wxUSE_PROGRESSDLG=no
  DEFAULT_wxUSE_MINIFRAME=no
  DEFAULT_wxUSE_HTML=no
  DEFAULT_wxUSE_FILESYSTEM=no
  DEFAULT_wxUSE_FS_INET=no
  DEFAULT_wxUSE_FS_ZIP=no
  DEFAULT_wxUSE_BUSYINFO=no
  DEFAULT_wxUSE_ZIPSTREAM=no
  DEFAULT_wxUSE_VALIDATORS=yes

  DEFAULT_wxUSE_ACCEL=no
  DEFAULT_wxUSE_CARET=no
  DEFAULT_wxUSE_BMPBUTTON=no
  DEFAULT_wxUSE_CHECKBOX=no
  DEFAULT_wxUSE_CHECKLST=no
  DEFAULT_wxUSE_CHOICE=yes
  DEFAULT_wxUSE_COMBOBOX=no
  DEFAULT_wxUSE_GAUGE=no
  DEFAULT_wxUSE_GRID=no
  DEFAULT_wxUSE_NEW_GRID=no
  DEFAULT_wxUSE_IMAGLIST=no
  DEFAULT_wxUSE_LISTBOX=no
  DEFAULT_wxUSE_LISTCTRL=no
  DEFAULT_wxUSE_NOTEBOOK=no
  DEFAULT_wxUSE_RADIOBOX=no
  DEFAULT_wxUSE_RADIOBTN=no
  DEFAULT_wxUSE_SASH=no
  DEFAULT_wxUSE_SCROLLBAR=no
  DEFAULT_wxUSE_SLIDER=no
  DEFAULT_wxUSE_SPINBTN=no
  DEFAULT_wxUSE_SPINCTRL=no
  DEFAULT_wxUSE_SPLITTER=no
  DEFAULT_wxUSE_STATBMP=no
  DEFAULT_wxUSE_STATBOX=no
  DEFAULT_wxUSE_STATLINE=no
  DEFAULT_wxUSE_STATUSBAR=yes
  DEFAULT_wxUSE_TABDIALOG=no
  DEFAULT_wxUSE_TOGGLEBTN=no
  DEFAULT_wxUSE_TOOLBAR=no
  DEFAULT_wxUSE_TOOLBAR_NATIVE=no
  DEFAULT_wxUSE_TOOLBAR_SIMPLE=no
  DEFAULT_wxUSE_TREECTRL=no

  DEFAULT_wxUSE_UNICODE=no
  DEFAULT_wxUSE_WCSRTOMBS=no

  DEFAULT_wxUSE_IMAGE=no
  DEFAULT_wxUSE_GIF=no
  DEFAULT_wxUSE_PCX=no
  DEFAULT_wxUSE_PNM=no
  DEFAULT_wxUSE_XPM=no
else
  DEFAULT_wxUSE_THREADS=yes

  DEFAULT_wxUSE_SHARED=yes
  DEFAULT_wxUSE_BURNT_NAME=no
  DEFAULT_wxUSE_OPTIMISE=yes
  DEFAULT_wxUSE_PROFILE=no
  DEFAULT_wxUSE_NO_DEPS=no
  DEFAULT_wxUSE_NO_RTTI=no
  DEFAULT_wxUSE_NO_EXCEPTIONS=no
  DEFAULT_wxUSE_PERMISSIVE=no
  DEFAULT_wxUSE_DEBUG_FLAG=no
  DEFAULT_wxUSE_DEBUG_INFO=no
  DEFAULT_wxUSE_DEBUG_GDB=no
  DEFAULT_wxUSE_MEM_TRACING=no
  DEFAULT_wxUSE_DEBUG_CONTEXT=no
  DEFAULT_wxUSE_DMALLOC=no
  DEFAULT_wxUSE_APPLE_IEEE=yes

  DEFAULT_wxUSE_LOG=yes

  DEFAULT_wxUSE_GUI=yes

  DEFAULT_wxUSE_ZLIB=yes
  DEFAULT_wxUSE_LIBPNG=yes
  DEFAULT_wxUSE_LIBJPEG=yes
  DEFAULT_wxUSE_LIBTIFF=yes
  DEFAULT_wxUSE_ODBC=no
  DEFAULT_wxUSE_FREETYPE=no
  DEFAULT_wxUSE_OPENGL=no

  DEFAULT_wxUSE_ON_FATAL_EXCEPTION=yes
  DEFAULT_wxUSE_SNGLINST_CHECKER=yes
  DEFAULT_wxUSE_STD_IOSTREAM=no
  DEFAULT_wxUSE_FILE=yes
  DEFAULT_wxUSE_TEXTFILE=yes
  DEFAULT_wxUSE_TIMEDATE=yes
  DEFAULT_wxUSE_WAVE=no
  DEFAULT_wxUSE_INTL=yes
  DEFAULT_wxUSE_CONFIG=yes
  DEFAULT_wxUSE_STREAMS=yes
  DEFAULT_wxUSE_SOCKETS=yes
  DEFAULT_wxUSE_DIALUP_MANAGER=yes
  DEFAULT_wxUSE_SERIAL=yes
  DEFAULT_wxUSE_JOYSTICK=yes
  DEFAULT_wxUSE_DYNLIB_CLASS=yes
  DEFAULT_wxUSE_LONGLONG=yes
  DEFAULT_wxUSE_GEOMETRY=yes

  DEFAULT_wxUSE_AFM_FOR_POSTSCRIPT=yes
  DEFAULT_wxUSE_NORMALIZED_PS_FONTS=yes
  DEFAULT_wxUSE_POSTSCRIPT=yes

  DEFAULT_wxUSE_X_RESOURCES=no
  DEFAULT_wxUSE_CLIPBOARD=yes
  DEFAULT_wxUSE_TOOLTIPS=yes
  DEFAULT_wxUSE_DRAG_AND_DROP=yes
  DEFAULT_wxUSE_SPLINES=yes

  DEFAULT_wxUSE_MDI_ARCHITECTURE=yes
  DEFAULT_wxUSE_DOC_VIEW_ARCHITECTURE=yes
  DEFAULT_wxUSE_PRINTING_ARCHITECTURE=yes

  DEFAULT_wxUSE_PROLOGIO=yes
  DEFAULT_wxUSE_RESOURCES=yes
  DEFAULT_wxUSE_CONSTRAINTS=yes
  DEFAULT_wxUSE_IPC=yes
  DEFAULT_wxUSE_HELP=yes
  DEFAULT_wxUSE_WXTREE=yes
  DEFAULT_wxUSE_METAFILE=yes

  DEFAULT_wxUSE_COMMONDLGS=yes
  DEFAULT_wxUSE_DIRDLG=yes
  DEFAULT_wxUSE_TEXTDLG=yes
  DEFAULT_wxUSE_STARTUP_TIPS=yes
  DEFAULT_wxUSE_PROGRESSDLG=yes
  DEFAULT_wxUSE_MINIFRAME=yes
  DEFAULT_wxUSE_HTML=yes
  DEFAULT_wxUSE_FILESYSTEM=yes
  DEFAULT_wxUSE_FS_INET=yes
  DEFAULT_wxUSE_FS_ZIP=yes
  DEFAULT_wxUSE_BUSYINFO=yes
  DEFAULT_wxUSE_ZIPSTREAM=yes
  DEFAULT_wxUSE_VALIDATORS=yes

  DEFAULT_wxUSE_ACCEL=yes
  DEFAULT_wxUSE_CARET=yes
  DEFAULT_wxUSE_BMPBUTTON=yes
  DEFAULT_wxUSE_CHECKBOX=yes
  DEFAULT_wxUSE_CHECKLST=yes
  DEFAULT_wxUSE_CHOICE=yes
  DEFAULT_wxUSE_COMBOBOX=yes
  DEFAULT_wxUSE_GAUGE=yes
  DEFAULT_wxUSE_GRID=yes
  DEFAULT_wxUSE_NEW_GRID=yes
  DEFAULT_wxUSE_IMAGLIST=yes
  DEFAULT_wxUSE_LISTBOX=yes
  DEFAULT_wxUSE_LISTCTRL=yes
  DEFAULT_wxUSE_NOTEBOOK=yes
  DEFAULT_wxUSE_RADIOBOX=yes
  DEFAULT_wxUSE_RADIOBTN=yes
  DEFAULT_wxUSE_SASH=yes
  DEFAULT_wxUSE_SCROLLBAR=yes
  DEFAULT_wxUSE_SLIDER=yes
  DEFAULT_wxUSE_SPINBTN=yes
  DEFAULT_wxUSE_SPINCTRL=yes
  DEFAULT_wxUSE_SPLITTER=yes
  DEFAULT_wxUSE_STATBMP=yes
  DEFAULT_wxUSE_STATBOX=yes
  DEFAULT_wxUSE_STATLINE=yes
  DEFAULT_wxUSE_STATUSBAR=yes
  DEFAULT_wxUSE_TABDIALOG=no
  DEFAULT_wxUSE_TOGGLEBTN=yes
  DEFAULT_wxUSE_TOOLBAR=yes
  DEFAULT_wxUSE_TOOLBAR_NATIVE=yes
  DEFAULT_wxUSE_TOOLBAR_SIMPLE=yes
  DEFAULT_wxUSE_TREECTRL=yes

  DEFAULT_wxUSE_UNICODE=no
  DEFAULT_wxUSE_WCSRTOMBS=no

  DEFAULT_wxUSE_IMAGE=yes
  DEFAULT_wxUSE_GIF=yes
  DEFAULT_wxUSE_PCX=yes
  DEFAULT_wxUSE_PNM=yes
  DEFAULT_wxUSE_XPM=yes
fi



for toolkit in `echo $ALL_TOOLKITS`; do
  LINE=`grep "wxUSE_$toolkit" ${wx_arg_cache_file}`
  if test "x$LINE" != x ; then
    has_toolkit_in_cache=1
    eval "DEFAULT_$LINE"
    eval "CACHE_$toolkit=1"
  fi
done



          echo $ac_n "checking "for --enable-gui"""... $ac_c" 1>&6
echo "configure:1577: checking "for --enable-gui"" >&5
          no_cache=0
          # Check whether --enable-gui or --disable-gui was given.
if test "${enable_gui+set}" = set; then
  enableval="$enable_gui"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_gui='wxUSE_GUI=yes'
                          else
                            ac_cv_use_gui='wxUSE_GUI=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_GUI" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_gui='wxUSE_GUI='$DEFAULT_wxUSE_GUI
                        
fi


          eval "$ac_cv_use_gui"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_gui >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_GUI" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

if test "$wxUSE_GUI" = "yes"; then

# Check whether --with-gtk or --without-gtk was given.
if test "${with_gtk+set}" = set; then
  withval="$with_gtk"
  wxUSE_GTK="$withval" CACHE_GTK=1 TOOLKIT_GIVEN=1
fi

# Check whether --with-motif or --without-motif was given.
if test "${with_motif+set}" = set; then
  withval="$with_motif"
  wxUSE_MOTIF="$withval" CACHE_MOTIF=1 TOOLKIT_GIVEN=1
fi

# Check whether --with-mac or --without-mac was given.
if test "${with_mac+set}" = set; then
  withval="$with_mac"
  wxUSE_MAC="$withval" TOOLKIT_GIVEN=1
fi

# Check whether --with-wine or --without-wine was given.
if test "${with_wine+set}" = set; then
  withval="$with_wine"
  wxUSE_WINE="$withval" CACHE_WINE=1 TOOLKIT_GIVEN=1
fi

# Check whether --with-cygwin or --without-cygwin was given.
if test "${with_cygwin+set}" = set; then
  withval="$with_cygwin"
  wxUSE_CYGWIN="$withval" CACHE_CYGWIN=1 TOOLKIT_GIVEN=1
fi

# Check whether --with-mingw or --without-mingw was given.
if test "${with_mingw+set}" = set; then
  withval="$with_mingw"
  wxUSE_MINGW="$withval" CACHE_MINGW=1 TOOLKIT_GIVEN=1
fi

# Check whether --with-pm or --without-pm was given.
if test "${with_pm+set}" = set; then
  withval="$with_pm"
  wxUSE_PM="$withval" CACHE_PM=1 TOOLKIT_GIVEN=1
fi


# Check whether --with-gtk-prefix or --without-gtk-prefix was given.
if test "${with_gtk_prefix+set}" = set; then
  withval="$with_gtk_prefix"
  gtk_config_prefix="$withval"
else
  gtk_config_prefix=""
fi

# Check whether --with-gtk-exec-prefix or --without-gtk-exec-prefix was given.
if test "${with_gtk_exec_prefix+set}" = set; then
  withval="$with_gtk_exec_prefix"
  gtk_config_exec_prefix="$withval"
else
  gtk_config_exec_prefix=""
fi



          echo $ac_n "checking "for --with-libpng"""... $ac_c" 1>&6
echo "configure:1679: checking "for --with-libpng"" >&5
          no_cache=0
          # Check whether --with-libpng or --without-libpng was given.
if test "${with_libpng+set}" = set; then
  withval="$with_libpng"
  
                        if test "$withval" = yes; then
                          ac_cv_use_libpng='wxUSE_LIBPNG=yes'
                        elif test "$withval" = no; then
                          ac_cv_use_libpng='wxUSE_LIBPNG=no'
                        elif test "$withval" = sys; then
                          ac_cv_use_libpng='wxUSE_LIBPNG=sys'
                        else
                          { echo "configure: error: Invalid value for --with-libpng: should be yes, no or sys" 1>&2; exit 1; }
                        fi
                      
else
  
                        LINE=`grep "wxUSE_LIBPNG" ${wx_arg_cache_file}`
                        if test "x$LINE" != x ; then
                          eval "DEFAULT_$LINE"
                        else
                          no_cache=1
                        fi

                        ac_cv_use_libpng='wxUSE_LIBPNG='$DEFAULT_wxUSE_LIBPNG
                      
fi


          eval "$ac_cv_use_libpng"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_libpng >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_LIBPNG" = yes; then
            echo "$ac_t""yes" 1>&6
          elif test "$wxUSE_LIBPNG" = no; then
            echo "$ac_t""no" 1>&6
          elif test "$wxUSE_LIBPNG" = sys; then
            echo "$ac_t""system version" 1>&6
          else
            { echo "configure: error: Invalid value for --with-libpng: should be yes, no or sys" 1>&2; exit 1; }
          fi
        

          echo $ac_n "checking "for --with-libjpeg"""... $ac_c" 1>&6
echo "configure:1726: checking "for --with-libjpeg"" >&5
          no_cache=0
          # Check whether --with-libjpeg or --without-libjpeg was given.
if test "${with_libjpeg+set}" = set; then
  withval="$with_libjpeg"
  
                        if test "$withval" = yes; then
                          ac_cv_use_libjpeg='wxUSE_LIBJPEG=yes'
                        elif test "$withval" = no; then
                          ac_cv_use_libjpeg='wxUSE_LIBJPEG=no'
                        elif test "$withval" = sys; then
                          ac_cv_use_libjpeg='wxUSE_LIBJPEG=sys'
                        else
                          { echo "configure: error: Invalid value for --with-libjpeg: should be yes, no or sys" 1>&2; exit 1; }
                        fi
                      
else
  
                        LINE=`grep "wxUSE_LIBJPEG" ${wx_arg_cache_file}`
                        if test "x$LINE" != x ; then
                          eval "DEFAULT_$LINE"
                        else
                          no_cache=1
                        fi

                        ac_cv_use_libjpeg='wxUSE_LIBJPEG='$DEFAULT_wxUSE_LIBJPEG
                      
fi


          eval "$ac_cv_use_libjpeg"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_libjpeg >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_LIBJPEG" = yes; then
            echo "$ac_t""yes" 1>&6
          elif test "$wxUSE_LIBJPEG" = no; then
            echo "$ac_t""no" 1>&6
          elif test "$wxUSE_LIBJPEG" = sys; then
            echo "$ac_t""system version" 1>&6
          else
            { echo "configure: error: Invalid value for --with-libjpeg: should be yes, no or sys" 1>&2; exit 1; }
          fi
        

          echo $ac_n "checking "for --with-libtiff"""... $ac_c" 1>&6
echo "configure:1773: checking "for --with-libtiff"" >&5
          no_cache=0
          # Check whether --with-libtiff or --without-libtiff was given.
if test "${with_libtiff+set}" = set; then
  withval="$with_libtiff"
  
                        if test "$withval" = yes; then
                          ac_cv_use_libtiff='wxUSE_LIBTIFF=yes'
                        elif test "$withval" = no; then
                          ac_cv_use_libtiff='wxUSE_LIBTIFF=no'
                        elif test "$withval" = sys; then
                          ac_cv_use_libtiff='wxUSE_LIBTIFF=sys'
                        else
                          { echo "configure: error: Invalid value for --with-libtiff: should be yes, no or sys" 1>&2; exit 1; }
                        fi
                      
else
  
                        LINE=`grep "wxUSE_LIBTIFF" ${wx_arg_cache_file}`
                        if test "x$LINE" != x ; then
                          eval "DEFAULT_$LINE"
                        else
                          no_cache=1
                        fi

                        ac_cv_use_libtiff='wxUSE_LIBTIFF='$DEFAULT_wxUSE_LIBTIFF
                      
fi


          eval "$ac_cv_use_libtiff"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_libtiff >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_LIBTIFF" = yes; then
            echo "$ac_t""yes" 1>&6
          elif test "$wxUSE_LIBTIFF" = no; then
            echo "$ac_t""no" 1>&6
          elif test "$wxUSE_LIBTIFF" = sys; then
            echo "$ac_t""system version" 1>&6
          else
            { echo "configure: error: Invalid value for --with-libtiff: should be yes, no or sys" 1>&2; exit 1; }
          fi
        

          echo $ac_n "checking "for --with-freetype"""... $ac_c" 1>&6
echo "configure:1820: checking "for --with-freetype"" >&5
          no_cache=0
          # Check whether --with-freetype or --without-freetype was given.
if test "${with_freetype+set}" = set; then
  withval="$with_freetype"
  
                        if test "$withval" = yes; then
                          ac_cv_use_freetype='wxUSE_FREETYPE=yes'
                        elif test "$withval" = no; then
                          ac_cv_use_freetype='wxUSE_FREETYPE=no'
                        elif test "$withval" = sys; then
                          ac_cv_use_freetype='wxUSE_FREETYPE=sys'
                        else
                          { echo "configure: error: Invalid value for --with-freetype: should be yes, no or sys" 1>&2; exit 1; }
                        fi
                      
else
  
                        LINE=`grep "wxUSE_FREETYPE" ${wx_arg_cache_file}`
                        if test "x$LINE" != x ; then
                          eval "DEFAULT_$LINE"
                        else
                          no_cache=1
                        fi

                        ac_cv_use_freetype='wxUSE_FREETYPE='$DEFAULT_wxUSE_FREETYPE
                      
fi


          eval "$ac_cv_use_freetype"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_freetype >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_FREETYPE" = yes; then
            echo "$ac_t""yes" 1>&6
          elif test "$wxUSE_FREETYPE" = no; then
            echo "$ac_t""no" 1>&6
          elif test "$wxUSE_FREETYPE" = sys; then
            echo "$ac_t""system version" 1>&6
          else
            { echo "configure: error: Invalid value for --with-freetype: should be yes, no or sys" 1>&2; exit 1; }
          fi
        

          echo $ac_n "checking "for --with-opengl"""... $ac_c" 1>&6
echo "configure:1867: checking "for --with-opengl"" >&5
          no_cache=0
          # Check whether --with-opengl or --without-opengl was given.
if test "${with_opengl+set}" = set; then
  withval="$with_opengl"
  
                        if test "$withval" = yes; then
                          ac_cv_use_opengl='wxUSE_OPENGL=yes'
                        else
                          ac_cv_use_opengl='wxUSE_OPENGL=no'
                        fi
                      
else
  
                        LINE=`grep "wxUSE_OPENGL" ${wx_arg_cache_file}`
                        if test "x$LINE" != x ; then
                          eval "DEFAULT_$LINE"
                        else
                          no_cache=1
                        fi

                        ac_cv_use_opengl='wxUSE_OPENGL='$DEFAULT_wxUSE_OPENGL
                      
fi


          eval "$ac_cv_use_opengl"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_opengl >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_OPENGL" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

fi


          echo $ac_n "checking "for --with-dmalloc"""... $ac_c" 1>&6
echo "configure:1909: checking "for --with-dmalloc"" >&5
          no_cache=0
          # Check whether --with-dmalloc or --without-dmalloc was given.
if test "${with_dmalloc+set}" = set; then
  withval="$with_dmalloc"
  
                        if test "$withval" = yes; then
                          ac_cv_use_dmalloc='wxUSE_DMALLOC=yes'
                        else
                          ac_cv_use_dmalloc='wxUSE_DMALLOC=no'
                        fi
                      
else
  
                        LINE=`grep "wxUSE_DMALLOC" ${wx_arg_cache_file}`
                        if test "x$LINE" != x ; then
                          eval "DEFAULT_$LINE"
                        else
                          no_cache=1
                        fi

                        ac_cv_use_dmalloc='wxUSE_DMALLOC='$DEFAULT_wxUSE_DMALLOC
                      
fi


          eval "$ac_cv_use_dmalloc"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_dmalloc >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_DMALLOC" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --with-zlib"""... $ac_c" 1>&6
echo "configure:1948: checking "for --with-zlib"" >&5
          no_cache=0
          # Check whether --with-zlib or --without-zlib was given.
if test "${with_zlib+set}" = set; then
  withval="$with_zlib"
  
                        if test "$withval" = yes; then
                          ac_cv_use_zlib='wxUSE_ZLIB=yes'
                        elif test "$withval" = no; then
                          ac_cv_use_zlib='wxUSE_ZLIB=no'
                        elif test "$withval" = sys; then
                          ac_cv_use_zlib='wxUSE_ZLIB=sys'
                        else
                          { echo "configure: error: Invalid value for --with-zlib: should be yes, no or sys" 1>&2; exit 1; }
                        fi
                      
else
  
                        LINE=`grep "wxUSE_ZLIB" ${wx_arg_cache_file}`
                        if test "x$LINE" != x ; then
                          eval "DEFAULT_$LINE"
                        else
                          no_cache=1
                        fi

                        ac_cv_use_zlib='wxUSE_ZLIB='$DEFAULT_wxUSE_ZLIB
                      
fi


          eval "$ac_cv_use_zlib"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_zlib >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_ZLIB" = yes; then
            echo "$ac_t""yes" 1>&6
          elif test "$wxUSE_ZLIB" = no; then
            echo "$ac_t""no" 1>&6
          elif test "$wxUSE_ZLIB" = sys; then
            echo "$ac_t""system version" 1>&6
          else
            { echo "configure: error: Invalid value for --with-zlib: should be yes, no or sys" 1>&2; exit 1; }
          fi
        

          echo $ac_n "checking "for --with-odbc"""... $ac_c" 1>&6
echo "configure:1995: checking "for --with-odbc"" >&5
          no_cache=0
          # Check whether --with-odbc or --without-odbc was given.
if test "${with_odbc+set}" = set; then
  withval="$with_odbc"
  
                        if test "$withval" = yes; then
                          ac_cv_use_odbc='wxUSE_ODBC=yes'
                        else
                          ac_cv_use_odbc='wxUSE_ODBC=no'
                        fi
                      
else
  
                        LINE=`grep "wxUSE_ODBC" ${wx_arg_cache_file}`
                        if test "x$LINE" != x ; then
                          eval "DEFAULT_$LINE"
                        else
                          no_cache=1
                        fi

                        ac_cv_use_odbc='wxUSE_ODBC='$DEFAULT_wxUSE_ODBC
                      
fi


          eval "$ac_cv_use_odbc"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_odbc >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_ODBC" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        




          echo $ac_n "checking "for --enable-shared"""... $ac_c" 1>&6
echo "configure:2037: checking "for --enable-shared"" >&5
          no_cache=0
          # Check whether --enable-shared or --disable-shared was given.
if test "${enable_shared+set}" = set; then
  enableval="$enable_shared"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_shared='wxUSE_SHARED=yes'
                          else
                            ac_cv_use_shared='wxUSE_SHARED=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_SHARED" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_shared='wxUSE_SHARED='$DEFAULT_wxUSE_SHARED
                        
fi


          eval "$ac_cv_use_shared"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_shared >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_SHARED" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-burnt_name"""... $ac_c" 1>&6
echo "configure:2076: checking "for --enable-burnt_name"" >&5
          no_cache=0
          # Check whether --enable-burnt_name or --disable-burnt_name was given.
if test "${enable_burnt_name+set}" = set; then
  enableval="$enable_burnt_name"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_burnt_name='wxUSE_BURNT_NAME=yes'
                          else
                            ac_cv_use_burnt_name='wxUSE_BURNT_NAME=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_BURNT_NAME" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_burnt_name='wxUSE_BURNT_NAME='$DEFAULT_wxUSE_BURNT_NAME
                        
fi


          eval "$ac_cv_use_burnt_name"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_burnt_name >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_BURNT_NAME" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-optimise"""... $ac_c" 1>&6
echo "configure:2115: checking "for --enable-optimise"" >&5
          no_cache=0
          # Check whether --enable-optimise or --disable-optimise was given.
if test "${enable_optimise+set}" = set; then
  enableval="$enable_optimise"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_optimise='wxUSE_OPTIMISE=yes'
                          else
                            ac_cv_use_optimise='wxUSE_OPTIMISE=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_OPTIMISE" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_optimise='wxUSE_OPTIMISE='$DEFAULT_wxUSE_OPTIMISE
                        
fi


          eval "$ac_cv_use_optimise"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_optimise >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_OPTIMISE" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-debug"""... $ac_c" 1>&6
echo "configure:2154: checking "for --enable-debug"" >&5
          no_cache=0
          # Check whether --enable-debug or --disable-debug was given.
if test "${enable_debug+set}" = set; then
  enableval="$enable_debug"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_debug='wxUSE_DEBUG=yes'
                          else
                            ac_cv_use_debug='wxUSE_DEBUG=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_DEBUG" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_debug='wxUSE_DEBUG='$DEFAULT_wxUSE_DEBUG
                        
fi


          eval "$ac_cv_use_debug"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_debug >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_DEBUG" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

if test "$wxUSE_DEBUG" = "yes"; then
  DEFAULT_wxUSE_DEBUG_FLAG=yes
  DEFAULT_wxUSE_DEBUG_INFO=yes
elif test "$wxUSE_DEBUG" = "no"; then
  DEFAULT_wxUSE_DEBUG_FLAG=no
  DEFAULT_wxUSE_DEBUG_INFO=no
fi


          echo $ac_n "checking "for --enable-debug_flag"""... $ac_c" 1>&6
echo "configure:2202: checking "for --enable-debug_flag"" >&5
          no_cache=0
          # Check whether --enable-debug_flag or --disable-debug_flag was given.
if test "${enable_debug_flag+set}" = set; then
  enableval="$enable_debug_flag"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_debug_flag='wxUSE_DEBUG_FLAG=yes'
                          else
                            ac_cv_use_debug_flag='wxUSE_DEBUG_FLAG=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_DEBUG_FLAG" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_debug_flag='wxUSE_DEBUG_FLAG='$DEFAULT_wxUSE_DEBUG_FLAG
                        
fi


          eval "$ac_cv_use_debug_flag"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_debug_flag >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_DEBUG_FLAG" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-debug_info"""... $ac_c" 1>&6
echo "configure:2241: checking "for --enable-debug_info"" >&5
          no_cache=0
          # Check whether --enable-debug_info or --disable-debug_info was given.
if test "${enable_debug_info+set}" = set; then
  enableval="$enable_debug_info"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_debug_info='wxUSE_DEBUG_INFO=yes'
                          else
                            ac_cv_use_debug_info='wxUSE_DEBUG_INFO=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_DEBUG_INFO" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_debug_info='wxUSE_DEBUG_INFO='$DEFAULT_wxUSE_DEBUG_INFO
                        
fi


          eval "$ac_cv_use_debug_info"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_debug_info >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_DEBUG_INFO" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-debug_gdb"""... $ac_c" 1>&6
echo "configure:2280: checking "for --enable-debug_gdb"" >&5
          no_cache=0
          # Check whether --enable-debug_gdb or --disable-debug_gdb was given.
if test "${enable_debug_gdb+set}" = set; then
  enableval="$enable_debug_gdb"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_debug_gdb='wxUSE_DEBUG_GDB=yes'
                          else
                            ac_cv_use_debug_gdb='wxUSE_DEBUG_GDB=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_DEBUG_GDB" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_debug_gdb='wxUSE_DEBUG_GDB='$DEFAULT_wxUSE_DEBUG_GDB
                        
fi


          eval "$ac_cv_use_debug_gdb"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_debug_gdb >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_DEBUG_GDB" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-debug_cntxt"""... $ac_c" 1>&6
echo "configure:2319: checking "for --enable-debug_cntxt"" >&5
          no_cache=0
          # Check whether --enable-debug_cntxt or --disable-debug_cntxt was given.
if test "${enable_debug_cntxt+set}" = set; then
  enableval="$enable_debug_cntxt"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_debug_cntxt='wxUSE_DEBUG_CONTEXT=yes'
                          else
                            ac_cv_use_debug_cntxt='wxUSE_DEBUG_CONTEXT=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_DEBUG_CONTEXT" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_debug_cntxt='wxUSE_DEBUG_CONTEXT='$DEFAULT_wxUSE_DEBUG_CONTEXT
                        
fi


          eval "$ac_cv_use_debug_cntxt"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_debug_cntxt >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_DEBUG_CONTEXT" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-mem_tracing"""... $ac_c" 1>&6
echo "configure:2358: checking "for --enable-mem_tracing"" >&5
          no_cache=0
          # Check whether --enable-mem_tracing or --disable-mem_tracing was given.
if test "${enable_mem_tracing+set}" = set; then
  enableval="$enable_mem_tracing"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_mem_tracing='wxUSE_MEM_TRACING=yes'
                          else
                            ac_cv_use_mem_tracing='wxUSE_MEM_TRACING=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_MEM_TRACING" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_mem_tracing='wxUSE_MEM_TRACING='$DEFAULT_wxUSE_MEM_TRACING
                        
fi


          eval "$ac_cv_use_mem_tracing"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_mem_tracing >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_MEM_TRACING" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-profile"""... $ac_c" 1>&6
echo "configure:2397: checking "for --enable-profile"" >&5
          no_cache=0
          # Check whether --enable-profile or --disable-profile was given.
if test "${enable_profile+set}" = set; then
  enableval="$enable_profile"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_profile='wxUSE_PROFILE=yes'
                          else
                            ac_cv_use_profile='wxUSE_PROFILE=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_PROFILE" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_profile='wxUSE_PROFILE='$DEFAULT_wxUSE_PROFILE
                        
fi


          eval "$ac_cv_use_profile"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_profile >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_PROFILE" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-no_rtti"""... $ac_c" 1>&6
echo "configure:2436: checking "for --enable-no_rtti"" >&5
          no_cache=0
          # Check whether --enable-no_rtti or --disable-no_rtti was given.
if test "${enable_no_rtti+set}" = set; then
  enableval="$enable_no_rtti"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_no_rtti='wxUSE_NO_RTTI=yes'
                          else
                            ac_cv_use_no_rtti='wxUSE_NO_RTTI=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_NO_RTTI" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_no_rtti='wxUSE_NO_RTTI='$DEFAULT_wxUSE_NO_RTTI
                        
fi


          eval "$ac_cv_use_no_rtti"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_no_rtti >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_NO_RTTI" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-no_exceptions"""... $ac_c" 1>&6
echo "configure:2475: checking "for --enable-no_exceptions"" >&5
          no_cache=0
          # Check whether --enable-no_exceptions or --disable-no_exceptions was given.
if test "${enable_no_exceptions+set}" = set; then
  enableval="$enable_no_exceptions"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_no_exceptions='wxUSE_NO_EXCEPTIONS=yes'
                          else
                            ac_cv_use_no_exceptions='wxUSE_NO_EXCEPTIONS=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_NO_EXCEPTIONS" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_no_exceptions='wxUSE_NO_EXCEPTIONS='$DEFAULT_wxUSE_NO_EXCEPTIONS
                        
fi


          eval "$ac_cv_use_no_exceptions"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_no_exceptions >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_NO_EXCEPTIONS" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-permissive"""... $ac_c" 1>&6
echo "configure:2514: checking "for --enable-permissive"" >&5
          no_cache=0
          # Check whether --enable-permissive or --disable-permissive was given.
if test "${enable_permissive+set}" = set; then
  enableval="$enable_permissive"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_permissive='wxUSE_PERMISSIVE=yes'
                          else
                            ac_cv_use_permissive='wxUSE_PERMISSIVE=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_PERMISSIVE" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_permissive='wxUSE_PERMISSIVE='$DEFAULT_wxUSE_PERMISSIVE
                        
fi


          eval "$ac_cv_use_permissive"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_permissive >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_PERMISSIVE" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-no_deps"""... $ac_c" 1>&6
echo "configure:2553: checking "for --enable-no_deps"" >&5
          no_cache=0
          # Check whether --enable-no_deps or --disable-no_deps was given.
if test "${enable_no_deps+set}" = set; then
  enableval="$enable_no_deps"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_no_deps='wxUSE_NO_DEPS=yes'
                          else
                            ac_cv_use_no_deps='wxUSE_NO_DEPS=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_NO_DEPS" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_no_deps='wxUSE_NO_DEPS='$DEFAULT_wxUSE_NO_DEPS
                        
fi


          eval "$ac_cv_use_no_deps"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_no_deps >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_NO_DEPS" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        



          echo $ac_n "checking "for --enable-intl"""... $ac_c" 1>&6
echo "configure:2594: checking "for --enable-intl"" >&5
          no_cache=0
          # Check whether --enable-intl or --disable-intl was given.
if test "${enable_intl+set}" = set; then
  enableval="$enable_intl"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_intl='wxUSE_INTL=yes'
                          else
                            ac_cv_use_intl='wxUSE_INTL=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_INTL" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_intl='wxUSE_INTL='$DEFAULT_wxUSE_INTL
                        
fi


          eval "$ac_cv_use_intl"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_intl >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_INTL" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-config"""... $ac_c" 1>&6
echo "configure:2633: checking "for --enable-config"" >&5
          no_cache=0
          # Check whether --enable-config or --disable-config was given.
if test "${enable_config+set}" = set; then
  enableval="$enable_config"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_config='wxUSE_CONFIG=yes'
                          else
                            ac_cv_use_config='wxUSE_CONFIG=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_CONFIG" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_config='wxUSE_CONFIG='$DEFAULT_wxUSE_CONFIG
                        
fi


          eval "$ac_cv_use_config"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_config >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_CONFIG" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        


          echo $ac_n "checking "for --enable-sockets"""... $ac_c" 1>&6
echo "configure:2673: checking "for --enable-sockets"" >&5
          no_cache=0
          # Check whether --enable-sockets or --disable-sockets was given.
if test "${enable_sockets+set}" = set; then
  enableval="$enable_sockets"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_sockets='wxUSE_SOCKETS=yes'
                          else
                            ac_cv_use_sockets='wxUSE_SOCKETS=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_SOCKETS" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_sockets='wxUSE_SOCKETS='$DEFAULT_wxUSE_SOCKETS
                        
fi


          eval "$ac_cv_use_sockets"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_sockets >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_SOCKETS" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        


          echo $ac_n "checking "for --enable-ipc"""... $ac_c" 1>&6
echo "configure:2713: checking "for --enable-ipc"" >&5
          no_cache=0
          # Check whether --enable-ipc or --disable-ipc was given.
if test "${enable_ipc+set}" = set; then
  enableval="$enable_ipc"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_ipc='wxUSE_IPC=yes'
                          else
                            ac_cv_use_ipc='wxUSE_IPC=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_IPC" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_ipc='wxUSE_IPC='$DEFAULT_wxUSE_IPC
                        
fi


          eval "$ac_cv_use_ipc"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_ipc >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_IPC" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        


          echo $ac_n "checking "for --enable-dialupman"""... $ac_c" 1>&6
echo "configure:2753: checking "for --enable-dialupman"" >&5
          no_cache=0
          # Check whether --enable-dialupman or --disable-dialupman was given.
if test "${enable_dialupman+set}" = set; then
  enableval="$enable_dialupman"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_dialupman='wxUSE_DIALUP_MANAGER=yes'
                          else
                            ac_cv_use_dialupman='wxUSE_DIALUP_MANAGER=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_DIALUP_MANAGER" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_dialupman='wxUSE_DIALUP_MANAGER='$DEFAULT_wxUSE_DIALUP_MANAGER
                        
fi


          eval "$ac_cv_use_dialupman"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_dialupman >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_DIALUP_MANAGER" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-apple_ieee"""... $ac_c" 1>&6
echo "configure:2792: checking "for --enable-apple_ieee"" >&5
          no_cache=0
          # Check whether --enable-apple_ieee or --disable-apple_ieee was given.
if test "${enable_apple_ieee+set}" = set; then
  enableval="$enable_apple_ieee"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_apple_ieee='wxUSE_APPLE_IEEE=yes'
                          else
                            ac_cv_use_apple_ieee='wxUSE_APPLE_IEEE=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_APPLE_IEEE" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_apple_ieee='wxUSE_APPLE_IEEE='$DEFAULT_wxUSE_APPLE_IEEE
                        
fi


          eval "$ac_cv_use_apple_ieee"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_apple_ieee >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_APPLE_IEEE" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-timedate"""... $ac_c" 1>&6
echo "configure:2831: checking "for --enable-timedate"" >&5
          no_cache=0
          # Check whether --enable-timedate or --disable-timedate was given.
if test "${enable_timedate+set}" = set; then
  enableval="$enable_timedate"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_timedate='wxUSE_TIMEDATE=yes'
                          else
                            ac_cv_use_timedate='wxUSE_TIMEDATE=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_TIMEDATE" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_timedate='wxUSE_TIMEDATE='$DEFAULT_wxUSE_TIMEDATE
                        
fi


          eval "$ac_cv_use_timedate"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_timedate >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_TIMEDATE" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-wave"""... $ac_c" 1>&6
echo "configure:2870: checking "for --enable-wave"" >&5
          no_cache=0
          # Check whether --enable-wave or --disable-wave was given.
if test "${enable_wave+set}" = set; then
  enableval="$enable_wave"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_wave='wxUSE_WAVE=yes'
                          else
                            ac_cv_use_wave='wxUSE_WAVE=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_WAVE" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_wave='wxUSE_WAVE='$DEFAULT_wxUSE_WAVE
                        
fi


          eval "$ac_cv_use_wave"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_wave >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_WAVE" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-fraction"""... $ac_c" 1>&6
echo "configure:2909: checking "for --enable-fraction"" >&5
          no_cache=0
          # Check whether --enable-fraction or --disable-fraction was given.
if test "${enable_fraction+set}" = set; then
  enableval="$enable_fraction"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_fraction='wxUSE_FRACTION=yes'
                          else
                            ac_cv_use_fraction='wxUSE_FRACTION=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_FRACTION" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_fraction='wxUSE_FRACTION='$DEFAULT_wxUSE_FRACTION
                        
fi


          eval "$ac_cv_use_fraction"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_fraction >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_FRACTION" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-dynlib"""... $ac_c" 1>&6
echo "configure:2948: checking "for --enable-dynlib"" >&5
          no_cache=0
          # Check whether --enable-dynlib or --disable-dynlib was given.
if test "${enable_dynlib+set}" = set; then
  enableval="$enable_dynlib"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_dynlib='wxUSE_DYNLIB_CLASS=yes'
                          else
                            ac_cv_use_dynlib='wxUSE_DYNLIB_CLASS=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_DYNLIB_CLASS" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_dynlib='wxUSE_DYNLIB_CLASS='$DEFAULT_wxUSE_DYNLIB_CLASS
                        
fi


          eval "$ac_cv_use_dynlib"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_dynlib >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_DYNLIB_CLASS" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-longlong"""... $ac_c" 1>&6
echo "configure:2987: checking "for --enable-longlong"" >&5
          no_cache=0
          # Check whether --enable-longlong or --disable-longlong was given.
if test "${enable_longlong+set}" = set; then
  enableval="$enable_longlong"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_longlong='wxUSE_LONGLONG=yes'
                          else
                            ac_cv_use_longlong='wxUSE_LONGLONG=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_LONGLONG" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_longlong='wxUSE_LONGLONG='$DEFAULT_wxUSE_LONGLONG
                        
fi


          eval "$ac_cv_use_longlong"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_longlong >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_LONGLONG" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-geometry"""... $ac_c" 1>&6
echo "configure:3026: checking "for --enable-geometry"" >&5
          no_cache=0
          # Check whether --enable-geometry or --disable-geometry was given.
if test "${enable_geometry+set}" = set; then
  enableval="$enable_geometry"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_geometry='wxUSE_GEOMETRY=yes'
                          else
                            ac_cv_use_geometry='wxUSE_GEOMETRY=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_GEOMETRY" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_geometry='wxUSE_GEOMETRY='$DEFAULT_wxUSE_GEOMETRY
                        
fi


          eval "$ac_cv_use_geometry"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_geometry >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_GEOMETRY" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-log"""... $ac_c" 1>&6
echo "configure:3065: checking "for --enable-log"" >&5
          no_cache=0
          # Check whether --enable-log or --disable-log was given.
if test "${enable_log+set}" = set; then
  enableval="$enable_log"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_log='wxUSE_LOG=yes'
                          else
                            ac_cv_use_log='wxUSE_LOG=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_LOG" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_log='wxUSE_LOG='$DEFAULT_wxUSE_LOG
                        
fi


          eval "$ac_cv_use_log"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_log >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_LOG" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-streams"""... $ac_c" 1>&6
echo "configure:3104: checking "for --enable-streams"" >&5
          no_cache=0
          # Check whether --enable-streams or --disable-streams was given.
if test "${enable_streams+set}" = set; then
  enableval="$enable_streams"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_streams='wxUSE_STREAMS=yes'
                          else
                            ac_cv_use_streams='wxUSE_STREAMS=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_STREAMS" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_streams='wxUSE_STREAMS='$DEFAULT_wxUSE_STREAMS
                        
fi


          eval "$ac_cv_use_streams"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_streams >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_STREAMS" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-file"""... $ac_c" 1>&6
echo "configure:3143: checking "for --enable-file"" >&5
          no_cache=0
          # Check whether --enable-file or --disable-file was given.
if test "${enable_file+set}" = set; then
  enableval="$enable_file"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_file='wxUSE_FILE=yes'
                          else
                            ac_cv_use_file='wxUSE_FILE=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_FILE" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_file='wxUSE_FILE='$DEFAULT_wxUSE_FILE
                        
fi


          eval "$ac_cv_use_file"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_file >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_FILE" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-textfile"""... $ac_c" 1>&6
echo "configure:3182: checking "for --enable-textfile"" >&5
          no_cache=0
          # Check whether --enable-textfile or --disable-textfile was given.
if test "${enable_textfile+set}" = set; then
  enableval="$enable_textfile"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_textfile='wxUSE_TEXTFILE=yes'
                          else
                            ac_cv_use_textfile='wxUSE_TEXTFILE=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_TEXTFILE" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_textfile='wxUSE_TEXTFILE='$DEFAULT_wxUSE_TEXTFILE
                        
fi


          eval "$ac_cv_use_textfile"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_textfile >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_TEXTFILE" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-unicode"""... $ac_c" 1>&6
echo "configure:3221: checking "for --enable-unicode"" >&5
          no_cache=0
          # Check whether --enable-unicode or --disable-unicode was given.
if test "${enable_unicode+set}" = set; then
  enableval="$enable_unicode"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_unicode='wxUSE_UNICODE=yes'
                          else
                            ac_cv_use_unicode='wxUSE_UNICODE=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_UNICODE" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_unicode='wxUSE_UNICODE='$DEFAULT_wxUSE_UNICODE
                        
fi


          eval "$ac_cv_use_unicode"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_unicode >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_UNICODE" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-wcsrtombs"""... $ac_c" 1>&6
echo "configure:3260: checking "for --enable-wcsrtombs"" >&5
          no_cache=0
          # Check whether --enable-wcsrtombs or --disable-wcsrtombs was given.
if test "${enable_wcsrtombs+set}" = set; then
  enableval="$enable_wcsrtombs"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_wcsrtombs='wxUSE_WCSRTOMBS=yes'
                          else
                            ac_cv_use_wcsrtombs='wxUSE_WCSRTOMBS=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_WCSRTOMBS" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_wcsrtombs='wxUSE_WCSRTOMBS='$DEFAULT_wxUSE_WCSRTOMBS
                        
fi


          eval "$ac_cv_use_wcsrtombs"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_wcsrtombs >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_WCSRTOMBS" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-wxprintfv"""... $ac_c" 1>&6
echo "configure:3299: checking "for --enable-wxprintfv"" >&5
          no_cache=0
          # Check whether --enable-wxprintfv or --disable-wxprintfv was given.
if test "${enable_wxprintfv+set}" = set; then
  enableval="$enable_wxprintfv"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_wxprintfv='wxUSE_EXPERIMENTAL_PRINTF=yes'
                          else
                            ac_cv_use_wxprintfv='wxUSE_EXPERIMENTAL_PRINTF=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_EXPERIMENTAL_PRINTF" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_wxprintfv='wxUSE_EXPERIMENTAL_PRINTF='$DEFAULT_wxUSE_EXPERIMENTAL_PRINTF
                        
fi


          eval "$ac_cv_use_wxprintfv"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_wxprintfv >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_EXPERIMENTAL_PRINTF" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-std_iostreams"""... $ac_c" 1>&6
echo "configure:3338: checking "for --enable-std_iostreams"" >&5
          no_cache=0
          # Check whether --enable-std_iostreams or --disable-std_iostreams was given.
if test "${enable_std_iostreams+set}" = set; then
  enableval="$enable_std_iostreams"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_std_iostreams='wxUSE_STD_IOSTREAM=yes'
                          else
                            ac_cv_use_std_iostreams='wxUSE_STD_IOSTREAM=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_STD_IOSTREAM" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_std_iostreams='wxUSE_STD_IOSTREAM='$DEFAULT_wxUSE_STD_IOSTREAM
                        
fi


          eval "$ac_cv_use_std_iostreams"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_std_iostreams >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_STD_IOSTREAM" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-filesystem"""... $ac_c" 1>&6
echo "configure:3377: checking "for --enable-filesystem"" >&5
          no_cache=0
          # Check whether --enable-filesystem or --disable-filesystem was given.
if test "${enable_filesystem+set}" = set; then
  enableval="$enable_filesystem"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_filesystem='wxUSE_FILESYSTEM=yes'
                          else
                            ac_cv_use_filesystem='wxUSE_FILESYSTEM=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_FILESYSTEM" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_filesystem='wxUSE_FILESYSTEM='$DEFAULT_wxUSE_FILESYSTEM
                        
fi


          eval "$ac_cv_use_filesystem"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_filesystem >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_FILESYSTEM" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-fs_inet"""... $ac_c" 1>&6
echo "configure:3416: checking "for --enable-fs_inet"" >&5
          no_cache=0
          # Check whether --enable-fs_inet or --disable-fs_inet was given.
if test "${enable_fs_inet+set}" = set; then
  enableval="$enable_fs_inet"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_fs_inet='wxUSE_FS_INET=yes'
                          else
                            ac_cv_use_fs_inet='wxUSE_FS_INET=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_FS_INET" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_fs_inet='wxUSE_FS_INET='$DEFAULT_wxUSE_FS_INET
                        
fi


          eval "$ac_cv_use_fs_inet"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_fs_inet >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_FS_INET" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-fs_zip"""... $ac_c" 1>&6
echo "configure:3455: checking "for --enable-fs_zip"" >&5
          no_cache=0
          # Check whether --enable-fs_zip or --disable-fs_zip was given.
if test "${enable_fs_zip+set}" = set; then
  enableval="$enable_fs_zip"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_fs_zip='wxUSE_FS_ZIP=yes'
                          else
                            ac_cv_use_fs_zip='wxUSE_FS_ZIP=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_FS_ZIP" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_fs_zip='wxUSE_FS_ZIP='$DEFAULT_wxUSE_FS_ZIP
                        
fi


          eval "$ac_cv_use_fs_zip"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_fs_zip >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_FS_ZIP" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-zipstream"""... $ac_c" 1>&6
echo "configure:3494: checking "for --enable-zipstream"" >&5
          no_cache=0
          # Check whether --enable-zipstream or --disable-zipstream was given.
if test "${enable_zipstream+set}" = set; then
  enableval="$enable_zipstream"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_zipstream='wxUSE_ZIPSTREAM=yes'
                          else
                            ac_cv_use_zipstream='wxUSE_ZIPSTREAM=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_ZIPSTREAM" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_zipstream='wxUSE_ZIPSTREAM='$DEFAULT_wxUSE_ZIPSTREAM
                        
fi


          eval "$ac_cv_use_zipstream"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_zipstream >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_ZIPSTREAM" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        


          echo $ac_n "checking "for --enable-catch_segvs"""... $ac_c" 1>&6
echo "configure:3534: checking "for --enable-catch_segvs"" >&5
          no_cache=0
          # Check whether --enable-catch_segvs or --disable-catch_segvs was given.
if test "${enable_catch_segvs+set}" = set; then
  enableval="$enable_catch_segvs"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_catch_segvs='wxUSE_ON_FATAL_EXCEPTION=yes'
                          else
                            ac_cv_use_catch_segvs='wxUSE_ON_FATAL_EXCEPTION=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_ON_FATAL_EXCEPTION" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_catch_segvs='wxUSE_ON_FATAL_EXCEPTION='$DEFAULT_wxUSE_ON_FATAL_EXCEPTION
                        
fi


          eval "$ac_cv_use_catch_segvs"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_catch_segvs >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_ON_FATAL_EXCEPTION" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-snglinst"""... $ac_c" 1>&6
echo "configure:3573: checking "for --enable-snglinst"" >&5
          no_cache=0
          # Check whether --enable-snglinst or --disable-snglinst was given.
if test "${enable_snglinst+set}" = set; then
  enableval="$enable_snglinst"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_snglinst='wxUSE_SNGLINST_CHECKER=yes'
                          else
                            ac_cv_use_snglinst='wxUSE_SNGLINST_CHECKER=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_SNGLINST_CHECKER" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_snglinst='wxUSE_SNGLINST_CHECKER='$DEFAULT_wxUSE_SNGLINST_CHECKER
                        
fi


          eval "$ac_cv_use_snglinst"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_snglinst >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_SNGLINST_CHECKER" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        



          echo $ac_n "checking "for --enable-threads"""... $ac_c" 1>&6
echo "configure:3614: checking "for --enable-threads"" >&5
          no_cache=0
          # Check whether --enable-threads or --disable-threads was given.
if test "${enable_threads+set}" = set; then
  enableval="$enable_threads"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_threads='wxUSE_THREADS=yes'
                          else
                            ac_cv_use_threads='wxUSE_THREADS=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_THREADS" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_threads='wxUSE_THREADS='$DEFAULT_wxUSE_THREADS
                        
fi


          eval "$ac_cv_use_threads"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_threads >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_THREADS" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-serial"""... $ac_c" 1>&6
echo "configure:3653: checking "for --enable-serial"" >&5
          no_cache=0
          # Check whether --enable-serial or --disable-serial was given.
if test "${enable_serial+set}" = set; then
  enableval="$enable_serial"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_serial='wxUSE_SERIAL=yes'
                          else
                            ac_cv_use_serial='wxUSE_SERIAL=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_SERIAL" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_serial='wxUSE_SERIAL='$DEFAULT_wxUSE_SERIAL
                        
fi


          eval "$ac_cv_use_serial"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_serial >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_SERIAL" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

if test "$wxUSE_GUI" = "yes"; then



          echo $ac_n "checking "for --enable-docview"""... $ac_c" 1>&6
echo "configure:3696: checking "for --enable-docview"" >&5
          no_cache=0
          # Check whether --enable-docview or --disable-docview was given.
if test "${enable_docview+set}" = set; then
  enableval="$enable_docview"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_docview='wxUSE_DOC_VIEW_ARCHITECTURE=yes'
                          else
                            ac_cv_use_docview='wxUSE_DOC_VIEW_ARCHITECTURE=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_DOC_VIEW_ARCHITECTURE" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_docview='wxUSE_DOC_VIEW_ARCHITECTURE='$DEFAULT_wxUSE_DOC_VIEW_ARCHITECTURE
                        
fi


          eval "$ac_cv_use_docview"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_docview >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_DOC_VIEW_ARCHITECTURE" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-help"""... $ac_c" 1>&6
echo "configure:3735: checking "for --enable-help"" >&5
          no_cache=0
          # Check whether --enable-help or --disable-help was given.
if test "${enable_help+set}" = set; then
  enableval="$enable_help"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_help='wxUSE_HELP=yes'
                          else
                            ac_cv_use_help='wxUSE_HELP=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_HELP" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_help='wxUSE_HELP='$DEFAULT_wxUSE_HELP
                        
fi


          eval "$ac_cv_use_help"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_help >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_HELP" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-constraints"""... $ac_c" 1>&6
echo "configure:3774: checking "for --enable-constraints"" >&5
          no_cache=0
          # Check whether --enable-constraints or --disable-constraints was given.
if test "${enable_constraints+set}" = set; then
  enableval="$enable_constraints"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_constraints='wxUSE_CONSTRAINTS=yes'
                          else
                            ac_cv_use_constraints='wxUSE_CONSTRAINTS=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_CONSTRAINTS" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_constraints='wxUSE_CONSTRAINTS='$DEFAULT_wxUSE_CONSTRAINTS
                        
fi


          eval "$ac_cv_use_constraints"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_constraints >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_CONSTRAINTS" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-printarch"""... $ac_c" 1>&6
echo "configure:3813: checking "for --enable-printarch"" >&5
          no_cache=0
          # Check whether --enable-printarch or --disable-printarch was given.
if test "${enable_printarch+set}" = set; then
  enableval="$enable_printarch"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_printarch='wxUSE_PRINTING_ARCHITECTURE=yes'
                          else
                            ac_cv_use_printarch='wxUSE_PRINTING_ARCHITECTURE=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_PRINTING_ARCHITECTURE" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_printarch='wxUSE_PRINTING_ARCHITECTURE='$DEFAULT_wxUSE_PRINTING_ARCHITECTURE
                        
fi


          eval "$ac_cv_use_printarch"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_printarch >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_PRINTING_ARCHITECTURE" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-mdi"""... $ac_c" 1>&6
echo "configure:3852: checking "for --enable-mdi"" >&5
          no_cache=0
          # Check whether --enable-mdi or --disable-mdi was given.
if test "${enable_mdi+set}" = set; then
  enableval="$enable_mdi"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_mdi='wxUSE_MDI_ARCHITECTURE=yes'
                          else
                            ac_cv_use_mdi='wxUSE_MDI_ARCHITECTURE=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_MDI_ARCHITECTURE" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_mdi='wxUSE_MDI_ARCHITECTURE='$DEFAULT_wxUSE_MDI_ARCHITECTURE
                        
fi


          eval "$ac_cv_use_mdi"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_mdi >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_MDI_ARCHITECTURE" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        


          echo $ac_n "checking "for --enable-postscript"""... $ac_c" 1>&6
echo "configure:3892: checking "for --enable-postscript"" >&5
          no_cache=0
          # Check whether --enable-postscript or --disable-postscript was given.
if test "${enable_postscript+set}" = set; then
  enableval="$enable_postscript"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_postscript='wxUSE_POSTSCRIPT=yes'
                          else
                            ac_cv_use_postscript='wxUSE_POSTSCRIPT=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_POSTSCRIPT" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_postscript='wxUSE_POSTSCRIPT='$DEFAULT_wxUSE_POSTSCRIPT
                        
fi


          eval "$ac_cv_use_postscript"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_postscript >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_POSTSCRIPT" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        



          echo $ac_n "checking "for --enable-prologio"""... $ac_c" 1>&6
echo "configure:3933: checking "for --enable-prologio"" >&5
          no_cache=0
          # Check whether --enable-prologio or --disable-prologio was given.
if test "${enable_prologio+set}" = set; then
  enableval="$enable_prologio"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_prologio='wxUSE_PROLOGIO=yes'
                          else
                            ac_cv_use_prologio='wxUSE_PROLOGIO=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_PROLOGIO" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_prologio='wxUSE_PROLOGIO='$DEFAULT_wxUSE_PROLOGIO
                        
fi


          eval "$ac_cv_use_prologio"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_prologio >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_PROLOGIO" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-resources"""... $ac_c" 1>&6
echo "configure:3972: checking "for --enable-resources"" >&5
          no_cache=0
          # Check whether --enable-resources or --disable-resources was given.
if test "${enable_resources+set}" = set; then
  enableval="$enable_resources"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_resources='wxUSE_RESOURCES=yes'
                          else
                            ac_cv_use_resources='wxUSE_RESOURCES=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_RESOURCES" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_resources='wxUSE_RESOURCES='$DEFAULT_wxUSE_RESOURCES
                        
fi


          eval "$ac_cv_use_resources"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_resources >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_RESOURCES" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        


          echo $ac_n "checking "for --enable-xresources"""... $ac_c" 1>&6
echo "configure:4012: checking "for --enable-xresources"" >&5
          no_cache=0
          # Check whether --enable-xresources or --disable-xresources was given.
if test "${enable_xresources+set}" = set; then
  enableval="$enable_xresources"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_xresources='wxUSE_X_RESOURCES=yes'
                          else
                            ac_cv_use_xresources='wxUSE_X_RESOURCES=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_X_RESOURCES" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_xresources='wxUSE_X_RESOURCES='$DEFAULT_wxUSE_X_RESOURCES
                        
fi


          eval "$ac_cv_use_xresources"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_xresources >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_X_RESOURCES" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        



          echo $ac_n "checking "for --enable-clipboard"""... $ac_c" 1>&6
echo "configure:4053: checking "for --enable-clipboard"" >&5
          no_cache=0
          # Check whether --enable-clipboard or --disable-clipboard was given.
if test "${enable_clipboard+set}" = set; then
  enableval="$enable_clipboard"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_clipboard='wxUSE_CLIPBOARD=yes'
                          else
                            ac_cv_use_clipboard='wxUSE_CLIPBOARD=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_CLIPBOARD" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_clipboard='wxUSE_CLIPBOARD='$DEFAULT_wxUSE_CLIPBOARD
                        
fi


          eval "$ac_cv_use_clipboard"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_clipboard >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_CLIPBOARD" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-dnd"""... $ac_c" 1>&6
echo "configure:4092: checking "for --enable-dnd"" >&5
          no_cache=0
          # Check whether --enable-dnd or --disable-dnd was given.
if test "${enable_dnd+set}" = set; then
  enableval="$enable_dnd"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_dnd='wxUSE_DRAG_AND_DROP=yes'
                          else
                            ac_cv_use_dnd='wxUSE_DRAG_AND_DROP=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_DRAG_AND_DROP" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_dnd='wxUSE_DRAG_AND_DROP='$DEFAULT_wxUSE_DRAG_AND_DROP
                        
fi


          eval "$ac_cv_use_dnd"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_dnd >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_DRAG_AND_DROP" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-metafile"""... $ac_c" 1>&6
echo "configure:4131: checking "for --enable-metafile"" >&5
          no_cache=0
          # Check whether --enable-metafile or --disable-metafile was given.
if test "${enable_metafile+set}" = set; then
  enableval="$enable_metafile"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_metafile='wxUSE_METAFILE=yes'
                          else
                            ac_cv_use_metafile='wxUSE_METAFILE=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_METAFILE" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_metafile='wxUSE_METAFILE='$DEFAULT_wxUSE_METAFILE
                        
fi


          eval "$ac_cv_use_metafile"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_metafile >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_METAFILE" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        


          echo $ac_n "checking "for --enable-wxtree"""... $ac_c" 1>&6
echo "configure:4171: checking "for --enable-wxtree"" >&5
          no_cache=0
          # Check whether --enable-wxtree or --disable-wxtree was given.
if test "${enable_wxtree+set}" = set; then
  enableval="$enable_wxtree"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_wxtree='wxUSE_WXTREE=yes'
                          else
                            ac_cv_use_wxtree='wxUSE_WXTREE=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_WXTREE" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_wxtree='wxUSE_WXTREE='$DEFAULT_wxUSE_WXTREE
                        
fi


          eval "$ac_cv_use_wxtree"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_wxtree >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_WXTREE" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        



          echo $ac_n "checking "for --enable-controls"""... $ac_c" 1>&6
echo "configure:4212: checking "for --enable-controls"" >&5
          no_cache=0
          # Check whether --enable-controls or --disable-controls was given.
if test "${enable_controls+set}" = set; then
  enableval="$enable_controls"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_controls='wxUSE_CONTROLS=yes'
                          else
                            ac_cv_use_controls='wxUSE_CONTROLS=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_CONTROLS" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_controls='wxUSE_CONTROLS='$DEFAULT_wxUSE_CONTROLS
                        
fi


          eval "$ac_cv_use_controls"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_controls >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_CONTROLS" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

if test "$wxUSE_CONTROLS" = "yes"; then
  DEFAULT_wxUSE_ACCEL=yes
  DEFAULT_wxUSE_CARET=yes
  DEFAULT_wxUSE_COMBOBOX=yes
  DEFAULT_wxUSE_BMPBUTTON=yes
  DEFAULT_wxUSE_CHECKBOX=yes
  DEFAULT_wxUSE_CHECKLISTBOX=yes
  DEFAULT_wxUSE_CHOICE=yes
  DEFAULT_wxUSE_GAUGE=yes
  DEFAULT_wxUSE_GRID=yes
  DEFAULT_wxUSE_NEW_GRID=yes
  DEFAULT_wxUSE_IMAGLIST=yes
  DEFAULT_wxUSE_LISTBOX=yes
  DEFAULT_wxUSE_LISTCTRL=yes
  DEFAULT_wxUSE_NOTEBOOK=yes
  DEFAULT_wxUSE_RADIOBOX=yes
  DEFAULT_wxUSE_RADIOBTN=yes
  DEFAULT_wxUSE_SASH=yes
  DEFAULT_wxUSE_SCROLLBAR=yes
  DEFAULT_wxUSE_SLIDER=yes
  DEFAULT_wxUSE_SPINBTN=yes
  DEFAULT_wxUSE_SPINCTRL=yes
  DEFAULT_wxUSE_SPLITTER=yes
  DEFAULT_wxUSE_STATBMP=yes
  DEFAULT_wxUSE_STATBOX=yes
  DEFAULT_wxUSE_STATLINE=yes
  DEFAULT_wxUSE_STATUSBAR=yes
  DEFAULT_wxUSE_TAB_DIALOG=yes
  DEFAULT_wxUSE_TOGGLEBTN=yes
  DEFAULT_wxUSE_TOOLBAR=yes
  DEFAULT_wxUSE_TOOLBAR_NATIVE=yes
  DEFAULT_wxUSE_TOOLBAR_SIMPLE=yes
  DEFAULT_wxUSE_TOOLTIPS=yes
  DEFAULT_wxUSE_TREECTRL=yes
elif test "$wxUSE_CONTROLS" = "no"; then
  DEFAULT_wxUSE_ACCEL=no
  DEFAULT_wxUSE_CARET=no
  DEFAULT_wxUSE_COMBOBOX=no
  DEFAULT_wxUSE_BMPBUTTON=no
  DEFAULT_wxUSE_CHECKBOX=no
  DEFAULT_wxUSE_CHECKLISTBOX=no
  DEFAULT_wxUSE_CHOICE=no
  DEFAULT_wxUSE_GAUGE=no
  DEFAULT_wxUSE_GRID=no
  DEFAULT_wxUSE_NEW_GRID=no
  DEFAULT_wxUSE_IMAGLIST=no
  DEFAULT_wxUSE_LISTBOX=no
  DEFAULT_wxUSE_LISTCTRL=no
  DEFAULT_wxUSE_NOTEBOOK=no
  DEFAULT_wxUSE_RADIOBOX=no
  DEFAULT_wxUSE_RADIOBTN=no
  DEFAULT_wxUSE_SASH=no
  DEFAULT_wxUSE_SCROLLBAR=no
  DEFAULT_wxUSE_SLIDER=no
  DEFAULT_wxUSE_SPINBTN=no
  DEFAULT_wxUSE_SPINCTRL=no
  DEFAULT_wxUSE_SPLITTER=no
  DEFAULT_wxUSE_STATBMP=no
  DEFAULT_wxUSE_STATBOX=no
  DEFAULT_wxUSE_STATLINE=no
  DEFAULT_wxUSE_STATUSBAR=no
  DEFAULT_wxUSE_TAB_DIALOG=no
  DEFAULT_wxUSE_TOGGLEBTN=no
  DEFAULT_wxUSE_TOOLBAR=no
  DEFAULT_wxUSE_TOOLBAR_NATIVE=no
  DEFAULT_wxUSE_TOOLBAR_SIMPLE=no
  DEFAULT_wxUSE_TOOLTIPS=no
  DEFAULT_wxUSE_TREECTRL=no
fi


          echo $ac_n "checking "for --enable-accel"""... $ac_c" 1>&6
echo "configure:4322: checking "for --enable-accel"" >&5
          no_cache=0
          # Check whether --enable-accel or --disable-accel was given.
if test "${enable_accel+set}" = set; then
  enableval="$enable_accel"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_accel='wxUSE_ACCEL=yes'
                          else
                            ac_cv_use_accel='wxUSE_ACCEL=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_ACCEL" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_accel='wxUSE_ACCEL='$DEFAULT_wxUSE_ACCEL
                        
fi


          eval "$ac_cv_use_accel"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_accel >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_ACCEL" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-caret"""... $ac_c" 1>&6
echo "configure:4361: checking "for --enable-caret"" >&5
          no_cache=0
          # Check whether --enable-caret or --disable-caret was given.
if test "${enable_caret+set}" = set; then
  enableval="$enable_caret"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_caret='wxUSE_CARET=yes'
                          else
                            ac_cv_use_caret='wxUSE_CARET=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_CARET" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_caret='wxUSE_CARET='$DEFAULT_wxUSE_CARET
                        
fi


          eval "$ac_cv_use_caret"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_caret >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_CARET" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-bmpbutton"""... $ac_c" 1>&6
echo "configure:4400: checking "for --enable-bmpbutton"" >&5
          no_cache=0
          # Check whether --enable-bmpbutton or --disable-bmpbutton was given.
if test "${enable_bmpbutton+set}" = set; then
  enableval="$enable_bmpbutton"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_bmpbutton='wxUSE_BMPBUTTON=yes'
                          else
                            ac_cv_use_bmpbutton='wxUSE_BMPBUTTON=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_BMPBUTTON" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_bmpbutton='wxUSE_BMPBUTTON='$DEFAULT_wxUSE_BMPBUTTON
                        
fi


          eval "$ac_cv_use_bmpbutton"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_bmpbutton >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_BMPBUTTON" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-checkbox"""... $ac_c" 1>&6
echo "configure:4439: checking "for --enable-checkbox"" >&5
          no_cache=0
          # Check whether --enable-checkbox or --disable-checkbox was given.
if test "${enable_checkbox+set}" = set; then
  enableval="$enable_checkbox"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_checkbox='wxUSE_CHECKBOX=yes'
                          else
                            ac_cv_use_checkbox='wxUSE_CHECKBOX=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_CHECKBOX" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_checkbox='wxUSE_CHECKBOX='$DEFAULT_wxUSE_CHECKBOX
                        
fi


          eval "$ac_cv_use_checkbox"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_checkbox >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_CHECKBOX" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-checklst"""... $ac_c" 1>&6
echo "configure:4478: checking "for --enable-checklst"" >&5
          no_cache=0
          # Check whether --enable-checklst or --disable-checklst was given.
if test "${enable_checklst+set}" = set; then
  enableval="$enable_checklst"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_checklst='wxUSE_CHECKLST=yes'
                          else
                            ac_cv_use_checklst='wxUSE_CHECKLST=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_CHECKLST" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_checklst='wxUSE_CHECKLST='$DEFAULT_wxUSE_CHECKLST
                        
fi


          eval "$ac_cv_use_checklst"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_checklst >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_CHECKLST" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-choice"""... $ac_c" 1>&6
echo "configure:4517: checking "for --enable-choice"" >&5
          no_cache=0
          # Check whether --enable-choice or --disable-choice was given.
if test "${enable_choice+set}" = set; then
  enableval="$enable_choice"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_choice='wxUSE_CHOICE=yes'
                          else
                            ac_cv_use_choice='wxUSE_CHOICE=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_CHOICE" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_choice='wxUSE_CHOICE='$DEFAULT_wxUSE_CHOICE
                        
fi


          eval "$ac_cv_use_choice"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_choice >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_CHOICE" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-combobox"""... $ac_c" 1>&6
echo "configure:4556: checking "for --enable-combobox"" >&5
          no_cache=0
          # Check whether --enable-combobox or --disable-combobox was given.
if test "${enable_combobox+set}" = set; then
  enableval="$enable_combobox"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_combobox='wxUSE_COMBOBOX=yes'
                          else
                            ac_cv_use_combobox='wxUSE_COMBOBOX=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_COMBOBOX" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_combobox='wxUSE_COMBOBOX='$DEFAULT_wxUSE_COMBOBOX
                        
fi


          eval "$ac_cv_use_combobox"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_combobox >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_COMBOBOX" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-gauge"""... $ac_c" 1>&6
echo "configure:4595: checking "for --enable-gauge"" >&5
          no_cache=0
          # Check whether --enable-gauge or --disable-gauge was given.
if test "${enable_gauge+set}" = set; then
  enableval="$enable_gauge"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_gauge='wxUSE_GAUGE=yes'
                          else
                            ac_cv_use_gauge='wxUSE_GAUGE=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_GAUGE" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_gauge='wxUSE_GAUGE='$DEFAULT_wxUSE_GAUGE
                        
fi


          eval "$ac_cv_use_gauge"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_gauge >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_GAUGE" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-grid"""... $ac_c" 1>&6
echo "configure:4634: checking "for --enable-grid"" >&5
          no_cache=0
          # Check whether --enable-grid or --disable-grid was given.
if test "${enable_grid+set}" = set; then
  enableval="$enable_grid"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_grid='wxUSE_GRID=yes'
                          else
                            ac_cv_use_grid='wxUSE_GRID=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_GRID" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_grid='wxUSE_GRID='$DEFAULT_wxUSE_GRID
                        
fi


          eval "$ac_cv_use_grid"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_grid >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_GRID" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-newgrid"""... $ac_c" 1>&6
echo "configure:4673: checking "for --enable-newgrid"" >&5
          no_cache=0
          # Check whether --enable-newgrid or --disable-newgrid was given.
if test "${enable_newgrid+set}" = set; then
  enableval="$enable_newgrid"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_newgrid='wxUSE_NEW_GRID=yes'
                          else
                            ac_cv_use_newgrid='wxUSE_NEW_GRID=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_NEW_GRID" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_newgrid='wxUSE_NEW_GRID='$DEFAULT_wxUSE_NEW_GRID
                        
fi


          eval "$ac_cv_use_newgrid"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_newgrid >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_NEW_GRID" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-imaglist"""... $ac_c" 1>&6
echo "configure:4712: checking "for --enable-imaglist"" >&5
          no_cache=0
          # Check whether --enable-imaglist or --disable-imaglist was given.
if test "${enable_imaglist+set}" = set; then
  enableval="$enable_imaglist"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_imaglist='wxUSE_IMAGLIST=yes'
                          else
                            ac_cv_use_imaglist='wxUSE_IMAGLIST=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_IMAGLIST" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_imaglist='wxUSE_IMAGLIST='$DEFAULT_wxUSE_IMAGLIST
                        
fi


          eval "$ac_cv_use_imaglist"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_imaglist >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_IMAGLIST" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-listbox"""... $ac_c" 1>&6
echo "configure:4751: checking "for --enable-listbox"" >&5
          no_cache=0
          # Check whether --enable-listbox or --disable-listbox was given.
if test "${enable_listbox+set}" = set; then
  enableval="$enable_listbox"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_listbox='wxUSE_LISTBOX=yes'
                          else
                            ac_cv_use_listbox='wxUSE_LISTBOX=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_LISTBOX" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_listbox='wxUSE_LISTBOX='$DEFAULT_wxUSE_LISTBOX
                        
fi


          eval "$ac_cv_use_listbox"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_listbox >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_LISTBOX" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-listctrl"""... $ac_c" 1>&6
echo "configure:4790: checking "for --enable-listctrl"" >&5
          no_cache=0
          # Check whether --enable-listctrl or --disable-listctrl was given.
if test "${enable_listctrl+set}" = set; then
  enableval="$enable_listctrl"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_listctrl='wxUSE_LISTCTRL=yes'
                          else
                            ac_cv_use_listctrl='wxUSE_LISTCTRL=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_LISTCTRL" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_listctrl='wxUSE_LISTCTRL='$DEFAULT_wxUSE_LISTCTRL
                        
fi


          eval "$ac_cv_use_listctrl"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_listctrl >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_LISTCTRL" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-notebook"""... $ac_c" 1>&6
echo "configure:4829: checking "for --enable-notebook"" >&5
          no_cache=0
          # Check whether --enable-notebook or --disable-notebook was given.
if test "${enable_notebook+set}" = set; then
  enableval="$enable_notebook"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_notebook='wxUSE_NOTEBOOK=yes'
                          else
                            ac_cv_use_notebook='wxUSE_NOTEBOOK=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_NOTEBOOK" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_notebook='wxUSE_NOTEBOOK='$DEFAULT_wxUSE_NOTEBOOK
                        
fi


          eval "$ac_cv_use_notebook"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_notebook >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_NOTEBOOK" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-radiobox"""... $ac_c" 1>&6
echo "configure:4868: checking "for --enable-radiobox"" >&5
          no_cache=0
          # Check whether --enable-radiobox or --disable-radiobox was given.
if test "${enable_radiobox+set}" = set; then
  enableval="$enable_radiobox"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_radiobox='wxUSE_RADIOBOX=yes'
                          else
                            ac_cv_use_radiobox='wxUSE_RADIOBOX=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_RADIOBOX" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_radiobox='wxUSE_RADIOBOX='$DEFAULT_wxUSE_RADIOBOX
                        
fi


          eval "$ac_cv_use_radiobox"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_radiobox >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_RADIOBOX" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-radiobtn"""... $ac_c" 1>&6
echo "configure:4907: checking "for --enable-radiobtn"" >&5
          no_cache=0
          # Check whether --enable-radiobtn or --disable-radiobtn was given.
if test "${enable_radiobtn+set}" = set; then
  enableval="$enable_radiobtn"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_radiobtn='wxUSE_RADIOBTN=yes'
                          else
                            ac_cv_use_radiobtn='wxUSE_RADIOBTN=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_RADIOBTN" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_radiobtn='wxUSE_RADIOBTN='$DEFAULT_wxUSE_RADIOBTN
                        
fi


          eval "$ac_cv_use_radiobtn"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_radiobtn >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_RADIOBTN" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-sash"""... $ac_c" 1>&6
echo "configure:4946: checking "for --enable-sash"" >&5
          no_cache=0
          # Check whether --enable-sash or --disable-sash was given.
if test "${enable_sash+set}" = set; then
  enableval="$enable_sash"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_sash='wxUSE_SASH=yes'
                          else
                            ac_cv_use_sash='wxUSE_SASH=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_SASH" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_sash='wxUSE_SASH='$DEFAULT_wxUSE_SASH
                        
fi


          eval "$ac_cv_use_sash"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_sash >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_SASH" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-scrollbar"""... $ac_c" 1>&6
echo "configure:4985: checking "for --enable-scrollbar"" >&5
          no_cache=0
          # Check whether --enable-scrollbar or --disable-scrollbar was given.
if test "${enable_scrollbar+set}" = set; then
  enableval="$enable_scrollbar"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_scrollbar='wxUSE_SCROLLBAR=yes'
                          else
                            ac_cv_use_scrollbar='wxUSE_SCROLLBAR=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_SCROLLBAR" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_scrollbar='wxUSE_SCROLLBAR='$DEFAULT_wxUSE_SCROLLBAR
                        
fi


          eval "$ac_cv_use_scrollbar"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_scrollbar >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_SCROLLBAR" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-slider"""... $ac_c" 1>&6
echo "configure:5024: checking "for --enable-slider"" >&5
          no_cache=0
          # Check whether --enable-slider or --disable-slider was given.
if test "${enable_slider+set}" = set; then
  enableval="$enable_slider"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_slider='wxUSE_SLIDER=yes'
                          else
                            ac_cv_use_slider='wxUSE_SLIDER=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_SLIDER" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_slider='wxUSE_SLIDER='$DEFAULT_wxUSE_SLIDER
                        
fi


          eval "$ac_cv_use_slider"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_slider >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_SLIDER" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-spinbtn"""... $ac_c" 1>&6
echo "configure:5063: checking "for --enable-spinbtn"" >&5
          no_cache=0
          # Check whether --enable-spinbtn or --disable-spinbtn was given.
if test "${enable_spinbtn+set}" = set; then
  enableval="$enable_spinbtn"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_spinbtn='wxUSE_SPINBTN=yes'
                          else
                            ac_cv_use_spinbtn='wxUSE_SPINBTN=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_SPINBTN" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_spinbtn='wxUSE_SPINBTN='$DEFAULT_wxUSE_SPINBTN
                        
fi


          eval "$ac_cv_use_spinbtn"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_spinbtn >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_SPINBTN" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-spinctrl"""... $ac_c" 1>&6
echo "configure:5102: checking "for --enable-spinctrl"" >&5
          no_cache=0
          # Check whether --enable-spinctrl or --disable-spinctrl was given.
if test "${enable_spinctrl+set}" = set; then
  enableval="$enable_spinctrl"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_spinctrl='wxUSE_SPINCTRL=yes'
                          else
                            ac_cv_use_spinctrl='wxUSE_SPINCTRL=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_SPINCTRL" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_spinctrl='wxUSE_SPINCTRL='$DEFAULT_wxUSE_SPINCTRL
                        
fi


          eval "$ac_cv_use_spinctrl"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_spinctrl >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_SPINCTRL" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-splitter"""... $ac_c" 1>&6
echo "configure:5141: checking "for --enable-splitter"" >&5
          no_cache=0
          # Check whether --enable-splitter or --disable-splitter was given.
if test "${enable_splitter+set}" = set; then
  enableval="$enable_splitter"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_splitter='wxUSE_SPLITTER=yes'
                          else
                            ac_cv_use_splitter='wxUSE_SPLITTER=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_SPLITTER" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_splitter='wxUSE_SPLITTER='$DEFAULT_wxUSE_SPLITTER
                        
fi


          eval "$ac_cv_use_splitter"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_splitter >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_SPLITTER" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-statbmp"""... $ac_c" 1>&6
echo "configure:5180: checking "for --enable-statbmp"" >&5
          no_cache=0
          # Check whether --enable-statbmp or --disable-statbmp was given.
if test "${enable_statbmp+set}" = set; then
  enableval="$enable_statbmp"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_statbmp='wxUSE_STATBMP=yes'
                          else
                            ac_cv_use_statbmp='wxUSE_STATBMP=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_STATBMP" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_statbmp='wxUSE_STATBMP='$DEFAULT_wxUSE_STATBMP
                        
fi


          eval "$ac_cv_use_statbmp"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_statbmp >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_STATBMP" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-statbox"""... $ac_c" 1>&6
echo "configure:5219: checking "for --enable-statbox"" >&5
          no_cache=0
          # Check whether --enable-statbox or --disable-statbox was given.
if test "${enable_statbox+set}" = set; then
  enableval="$enable_statbox"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_statbox='wxUSE_STATBOX=yes'
                          else
                            ac_cv_use_statbox='wxUSE_STATBOX=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_STATBOX" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_statbox='wxUSE_STATBOX='$DEFAULT_wxUSE_STATBOX
                        
fi


          eval "$ac_cv_use_statbox"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_statbox >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_STATBOX" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-statline"""... $ac_c" 1>&6
echo "configure:5258: checking "for --enable-statline"" >&5
          no_cache=0
          # Check whether --enable-statline or --disable-statline was given.
if test "${enable_statline+set}" = set; then
  enableval="$enable_statline"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_statline='wxUSE_STATLINE=yes'
                          else
                            ac_cv_use_statline='wxUSE_STATLINE=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_STATLINE" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_statline='wxUSE_STATLINE='$DEFAULT_wxUSE_STATLINE
                        
fi


          eval "$ac_cv_use_statline"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_statline >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_STATLINE" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-statusbar"""... $ac_c" 1>&6
echo "configure:5297: checking "for --enable-statusbar"" >&5
          no_cache=0
          # Check whether --enable-statusbar or --disable-statusbar was given.
if test "${enable_statusbar+set}" = set; then
  enableval="$enable_statusbar"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_statusbar='wxUSE_STATUSBAR=yes'
                          else
                            ac_cv_use_statusbar='wxUSE_STATUSBAR=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_STATUSBAR" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_statusbar='wxUSE_STATUSBAR='$DEFAULT_wxUSE_STATUSBAR
                        
fi


          eval "$ac_cv_use_statusbar"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_statusbar >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_STATUSBAR" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-tabdialog"""... $ac_c" 1>&6
echo "configure:5336: checking "for --enable-tabdialog"" >&5
          no_cache=0
          # Check whether --enable-tabdialog or --disable-tabdialog was given.
if test "${enable_tabdialog+set}" = set; then
  enableval="$enable_tabdialog"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_tabdialog='wxUSE_TABDIALOG=yes'
                          else
                            ac_cv_use_tabdialog='wxUSE_TABDIALOG=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_TABDIALOG" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_tabdialog='wxUSE_TABDIALOG='$DEFAULT_wxUSE_TABDIALOG
                        
fi


          eval "$ac_cv_use_tabdialog"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_tabdialog >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_TABDIALOG" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-togglebtn"""... $ac_c" 1>&6
echo "configure:5375: checking "for --enable-togglebtn"" >&5
          no_cache=0
          # Check whether --enable-togglebtn or --disable-togglebtn was given.
if test "${enable_togglebtn+set}" = set; then
  enableval="$enable_togglebtn"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_togglebtn='wxUSE_TOGGLEBTN=yes'
                          else
                            ac_cv_use_togglebtn='wxUSE_TOGGLEBTN=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_TOGGLEBTN" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_togglebtn='wxUSE_TOGGLEBTN='$DEFAULT_wxUSE_TOGGLEBTN
                        
fi


          eval "$ac_cv_use_togglebtn"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_togglebtn >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_TOGGLEBTN" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-toolbar"""... $ac_c" 1>&6
echo "configure:5414: checking "for --enable-toolbar"" >&5
          no_cache=0
          # Check whether --enable-toolbar or --disable-toolbar was given.
if test "${enable_toolbar+set}" = set; then
  enableval="$enable_toolbar"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_toolbar='wxUSE_TOOLBAR=yes'
                          else
                            ac_cv_use_toolbar='wxUSE_TOOLBAR=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_TOOLBAR" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_toolbar='wxUSE_TOOLBAR='$DEFAULT_wxUSE_TOOLBAR
                        
fi


          eval "$ac_cv_use_toolbar"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_toolbar >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_TOOLBAR" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-tbarnative"""... $ac_c" 1>&6
echo "configure:5453: checking "for --enable-tbarnative"" >&5
          no_cache=0
          # Check whether --enable-tbarnative or --disable-tbarnative was given.
if test "${enable_tbarnative+set}" = set; then
  enableval="$enable_tbarnative"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_tbarnative='wxUSE_TOOLBAR_NATIVE=yes'
                          else
                            ac_cv_use_tbarnative='wxUSE_TOOLBAR_NATIVE=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_TOOLBAR_NATIVE" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_tbarnative='wxUSE_TOOLBAR_NATIVE='$DEFAULT_wxUSE_TOOLBAR_NATIVE
                        
fi


          eval "$ac_cv_use_tbarnative"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_tbarnative >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_TOOLBAR_NATIVE" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-tbarsmpl"""... $ac_c" 1>&6
echo "configure:5492: checking "for --enable-tbarsmpl"" >&5
          no_cache=0
          # Check whether --enable-tbarsmpl or --disable-tbarsmpl was given.
if test "${enable_tbarsmpl+set}" = set; then
  enableval="$enable_tbarsmpl"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_tbarsmpl='wxUSE_TOOLBAR_SIMPLE=yes'
                          else
                            ac_cv_use_tbarsmpl='wxUSE_TOOLBAR_SIMPLE=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_TOOLBAR_SIMPLE" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_tbarsmpl='wxUSE_TOOLBAR_SIMPLE='$DEFAULT_wxUSE_TOOLBAR_SIMPLE
                        
fi


          eval "$ac_cv_use_tbarsmpl"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_tbarsmpl >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_TOOLBAR_SIMPLE" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-treectrl"""... $ac_c" 1>&6
echo "configure:5531: checking "for --enable-treectrl"" >&5
          no_cache=0
          # Check whether --enable-treectrl or --disable-treectrl was given.
if test "${enable_treectrl+set}" = set; then
  enableval="$enable_treectrl"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_treectrl='wxUSE_TREECTRL=yes'
                          else
                            ac_cv_use_treectrl='wxUSE_TREECTRL=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_TREECTRL" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_treectrl='wxUSE_TREECTRL='$DEFAULT_wxUSE_TREECTRL
                        
fi


          eval "$ac_cv_use_treectrl"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_treectrl >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_TREECTRL" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        



          echo $ac_n "checking "for --enable-commondlg"""... $ac_c" 1>&6
echo "configure:5572: checking "for --enable-commondlg"" >&5
          no_cache=0
          # Check whether --enable-commondlg or --disable-commondlg was given.
if test "${enable_commondlg+set}" = set; then
  enableval="$enable_commondlg"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_commondlg='wxUSE_COMMONDLGS=yes'
                          else
                            ac_cv_use_commondlg='wxUSE_COMMONDLGS=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_COMMONDLGS" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_commondlg='wxUSE_COMMONDLGS='$DEFAULT_wxUSE_COMMONDLGS
                        
fi


          eval "$ac_cv_use_commondlg"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_commondlg >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_COMMONDLGS" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-dirdlg"""... $ac_c" 1>&6
echo "configure:5611: checking "for --enable-dirdlg"" >&5
          no_cache=0
          # Check whether --enable-dirdlg or --disable-dirdlg was given.
if test "${enable_dirdlg+set}" = set; then
  enableval="$enable_dirdlg"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_dirdlg='wxUSE_DIRDLG=yes'
                          else
                            ac_cv_use_dirdlg='wxUSE_DIRDLG=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_DIRDLG" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_dirdlg='wxUSE_DIRDLG='$DEFAULT_wxUSE_DIRDLG
                        
fi


          eval "$ac_cv_use_dirdlg"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_dirdlg >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_DIRDLG" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-textdlg"""... $ac_c" 1>&6
echo "configure:5650: checking "for --enable-textdlg"" >&5
          no_cache=0
          # Check whether --enable-textdlg or --disable-textdlg was given.
if test "${enable_textdlg+set}" = set; then
  enableval="$enable_textdlg"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_textdlg='wxUSE_TEXTDLG=yes'
                          else
                            ac_cv_use_textdlg='wxUSE_TEXTDLG=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_TEXTDLG" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_textdlg='wxUSE_TEXTDLG='$DEFAULT_wxUSE_TEXTDLG
                        
fi


          eval "$ac_cv_use_textdlg"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_textdlg >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_TEXTDLG" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-tipdlg"""... $ac_c" 1>&6
echo "configure:5689: checking "for --enable-tipdlg"" >&5
          no_cache=0
          # Check whether --enable-tipdlg or --disable-tipdlg was given.
if test "${enable_tipdlg+set}" = set; then
  enableval="$enable_tipdlg"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_tipdlg='wxUSE_STARTUP_TIPS=yes'
                          else
                            ac_cv_use_tipdlg='wxUSE_STARTUP_TIPS=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_STARTUP_TIPS" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_tipdlg='wxUSE_STARTUP_TIPS='$DEFAULT_wxUSE_STARTUP_TIPS
                        
fi


          eval "$ac_cv_use_tipdlg"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_tipdlg >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_STARTUP_TIPS" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-progressdlg"""... $ac_c" 1>&6
echo "configure:5728: checking "for --enable-progressdlg"" >&5
          no_cache=0
          # Check whether --enable-progressdlg or --disable-progressdlg was given.
if test "${enable_progressdlg+set}" = set; then
  enableval="$enable_progressdlg"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_progressdlg='wxUSE_PROGRESSDLG=yes'
                          else
                            ac_cv_use_progressdlg='wxUSE_PROGRESSDLG=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_PROGRESSDLG" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_progressdlg='wxUSE_PROGRESSDLG='$DEFAULT_wxUSE_PROGRESSDLG
                        
fi


          eval "$ac_cv_use_progressdlg"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_progressdlg >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_PROGRESSDLG" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-miniframe"""... $ac_c" 1>&6
echo "configure:5767: checking "for --enable-miniframe"" >&5
          no_cache=0
          # Check whether --enable-miniframe or --disable-miniframe was given.
if test "${enable_miniframe+set}" = set; then
  enableval="$enable_miniframe"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_miniframe='wxUSE_MINIFRAME=yes'
                          else
                            ac_cv_use_miniframe='wxUSE_MINIFRAME=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_MINIFRAME" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_miniframe='wxUSE_MINIFRAME='$DEFAULT_wxUSE_MINIFRAME
                        
fi


          eval "$ac_cv_use_miniframe"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_miniframe >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_MINIFRAME" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-html"""... $ac_c" 1>&6
echo "configure:5806: checking "for --enable-html"" >&5
          no_cache=0
          # Check whether --enable-html or --disable-html was given.
if test "${enable_html+set}" = set; then
  enableval="$enable_html"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_html='wxUSE_HTML=yes'
                          else
                            ac_cv_use_html='wxUSE_HTML=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_HTML" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_html='wxUSE_HTML='$DEFAULT_wxUSE_HTML
                        
fi


          eval "$ac_cv_use_html"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_html >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_HTML" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-tooltips"""... $ac_c" 1>&6
echo "configure:5845: checking "for --enable-tooltips"" >&5
          no_cache=0
          # Check whether --enable-tooltips or --disable-tooltips was given.
if test "${enable_tooltips+set}" = set; then
  enableval="$enable_tooltips"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_tooltips='wxUSE_TOOLTIPS=yes'
                          else
                            ac_cv_use_tooltips='wxUSE_TOOLTIPS=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_TOOLTIPS" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_tooltips='wxUSE_TOOLTIPS='$DEFAULT_wxUSE_TOOLTIPS
                        
fi


          eval "$ac_cv_use_tooltips"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_tooltips >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_TOOLTIPS" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-splines"""... $ac_c" 1>&6
echo "configure:5884: checking "for --enable-splines"" >&5
          no_cache=0
          # Check whether --enable-splines or --disable-splines was given.
if test "${enable_splines+set}" = set; then
  enableval="$enable_splines"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_splines='wxUSE_SPLINES=yes'
                          else
                            ac_cv_use_splines='wxUSE_SPLINES=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_SPLINES" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_splines='wxUSE_SPLINES='$DEFAULT_wxUSE_SPLINES
                        
fi


          eval "$ac_cv_use_splines"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_splines >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_SPLINES" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-validators"""... $ac_c" 1>&6
echo "configure:5923: checking "for --enable-validators"" >&5
          no_cache=0
          # Check whether --enable-validators or --disable-validators was given.
if test "${enable_validators+set}" = set; then
  enableval="$enable_validators"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_validators='wxUSE_VALIDATORS=yes'
                          else
                            ac_cv_use_validators='wxUSE_VALIDATORS=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_VALIDATORS" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_validators='wxUSE_VALIDATORS='$DEFAULT_wxUSE_VALIDATORS
                        
fi


          eval "$ac_cv_use_validators"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_validators >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_VALIDATORS" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-busyinfo"""... $ac_c" 1>&6
echo "configure:5962: checking "for --enable-busyinfo"" >&5
          no_cache=0
          # Check whether --enable-busyinfo or --disable-busyinfo was given.
if test "${enable_busyinfo+set}" = set; then
  enableval="$enable_busyinfo"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_busyinfo='wxUSE_BUSYINFO=yes'
                          else
                            ac_cv_use_busyinfo='wxUSE_BUSYINFO=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_BUSYINFO" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_busyinfo='wxUSE_BUSYINFO='$DEFAULT_wxUSE_BUSYINFO
                        
fi


          eval "$ac_cv_use_busyinfo"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_busyinfo >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_BUSYINFO" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-joystick"""... $ac_c" 1>&6
echo "configure:6001: checking "for --enable-joystick"" >&5
          no_cache=0
          # Check whether --enable-joystick or --disable-joystick was given.
if test "${enable_joystick+set}" = set; then
  enableval="$enable_joystick"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_joystick='wxUSE_JOYSTICK=yes'
                          else
                            ac_cv_use_joystick='wxUSE_JOYSTICK=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_JOYSTICK" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_joystick='wxUSE_JOYSTICK='$DEFAULT_wxUSE_JOYSTICK
                        
fi


          eval "$ac_cv_use_joystick"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_joystick >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_JOYSTICK" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        



          echo $ac_n "checking "for --enable-image"""... $ac_c" 1>&6
echo "configure:6042: checking "for --enable-image"" >&5
          no_cache=0
          # Check whether --enable-image or --disable-image was given.
if test "${enable_image+set}" = set; then
  enableval="$enable_image"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_image='wxUSE_IMAGE=yes'
                          else
                            ac_cv_use_image='wxUSE_IMAGE=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_IMAGE" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_image='wxUSE_IMAGE='$DEFAULT_wxUSE_IMAGE
                        
fi


          eval "$ac_cv_use_image"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_image >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_IMAGE" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-gif"""... $ac_c" 1>&6
echo "configure:6081: checking "for --enable-gif"" >&5
          no_cache=0
          # Check whether --enable-gif or --disable-gif was given.
if test "${enable_gif+set}" = set; then
  enableval="$enable_gif"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_gif='wxUSE_GIF=yes'
                          else
                            ac_cv_use_gif='wxUSE_GIF=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_GIF" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_gif='wxUSE_GIF='$DEFAULT_wxUSE_GIF
                        
fi


          eval "$ac_cv_use_gif"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_gif >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_GIF" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-pcx"""... $ac_c" 1>&6
echo "configure:6120: checking "for --enable-pcx"" >&5
          no_cache=0
          # Check whether --enable-pcx or --disable-pcx was given.
if test "${enable_pcx+set}" = set; then
  enableval="$enable_pcx"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_pcx='wxUSE_PCX=yes'
                          else
                            ac_cv_use_pcx='wxUSE_PCX=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_PCX" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_pcx='wxUSE_PCX='$DEFAULT_wxUSE_PCX
                        
fi


          eval "$ac_cv_use_pcx"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_pcx >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_PCX" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-pnm"""... $ac_c" 1>&6
echo "configure:6159: checking "for --enable-pnm"" >&5
          no_cache=0
          # Check whether --enable-pnm or --disable-pnm was given.
if test "${enable_pnm+set}" = set; then
  enableval="$enable_pnm"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_pnm='wxUSE_PNM=yes'
                          else
                            ac_cv_use_pnm='wxUSE_PNM=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_PNM" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_pnm='wxUSE_PNM='$DEFAULT_wxUSE_PNM
                        
fi


          eval "$ac_cv_use_pnm"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_pnm >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_PNM" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

          echo $ac_n "checking "for --enable-pnm"""... $ac_c" 1>&6
echo "configure:6198: checking "for --enable-pnm"" >&5
          no_cache=0
          # Check whether --enable-pnm or --disable-pnm was given.
if test "${enable_pnm+set}" = set; then
  enableval="$enable_pnm"
  
                          if test "$enableval" = yes; then
                            ac_cv_use_pnm='wxUSE_XPM=yes'
                          else
                            ac_cv_use_pnm='wxUSE_XPM=no'
                          fi
                        
else
  
                          LINE=`grep "wxUSE_XPM" ${wx_arg_cache_file}`
                          if test "x$LINE" != x ; then
                            eval "DEFAULT_$LINE"
                          else
                            no_cache=1
                          fi

                          ac_cv_use_pnm='wxUSE_XPM='$DEFAULT_wxUSE_XPM
                        
fi


          eval "$ac_cv_use_pnm"
          if test "$no_cache" != 1; then
            echo $ac_cv_use_pnm >> ${wx_arg_cache_file}.tmp
          fi

          if test "$wxUSE_XPM" = yes; then
            echo "$ac_t""yes" 1>&6
          else
            echo "$ac_t""no" 1>&6
          fi
        

fi


          echo "saving argument cache $wx_arg_cache_file"
          mv ${wx_arg_cache_file}.tmp ${wx_arg_cache_file}
        


echo $ac_n "checking for toolkit""... $ac_c" 1>&6
echo "configure:6245: checking for toolkit" >&5

if test "$wxUSE_GUI" = "yes"; then

if test "$USE_BEOS" = 1; then
    { echo "configure: error: BeOS GUI is not supported yet, use --disable-gui" 1>&2; exit 1; }
fi

if test "$TOOLKIT_GIVEN" = 1; then
    for toolkit in `echo $ALL_TOOLKITS`; do
    var=wxUSE_$toolkit
    eval "value=\$${var}"
    eval "$var=`echo \$value | sed -e "s/yes/1/" -e "s/no/0/"`"
  done
else
    for toolkit in `echo $ALL_TOOLKITS`; do
    if test "$has_toolkit_in_cache" != 1; then
      var=DEFAULT_DEFAULT_wxUSE_$toolkit
    else
      var=DEFAULT_wxUSE_$toolkit
    fi
    eval "wxUSE_$toolkit=\$${var}"
  done
fi

NUM_TOOLKITS=`expr ${wxUSE_GTK:-0} + ${wxUSE_MOTIF:-0} + ${wxUSE_MAC:-0} + ${wxUSE_WINE:-0} + ${wxUSE_MINGW:-0} + ${wxUSE_CYGWIN:-0}`

case "${host}" in
  *-pc-os2_emx )
    NUM_TOOLKITS=`expr ${NUM_TOOLKITS} + ${wxUSE_PM:-0}`
    # PATH_IFS is autodetected by OS/2's configure (usually ';')
    LEX_STEM="lexyy"
  ;;
  *)
    PATH_IFS=':'
    LEX_STEM="lex.yy"
  ;;
esac

case "$NUM_TOOLKITS" in
  1)
  ;;
  0)
    { echo "configure: error: Please specify a toolkit - cannot determine the default for ${host}" 1>&2; exit 1; }
  ;;
  *)
    { echo "configure: error: Please specify at most one toolkit (may be some are cached?)" 1>&2; exit 1; }
esac

for toolkit in `echo $ALL_TOOLKITS`; do
  var=wxUSE_$toolkit
  eval "value=\$${var}"
  if test "x$value" != x; then
    cache_var=CACHE_$toolkit
    eval "cache=\$${cache_var}"
    if test "$cache" = 1; then
      echo "$var=$value" >> ${wx_arg_cache_file}
    fi
    if test "$value" = 1; then
      echo "$ac_t""`echo $toolkit | tr A-Z a-z`" 1>&6
    fi
  fi
done

else
    PATH_IFS=':'
    echo "$ac_t""base only" 1>&6
fi


cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs.  It is not useful on other systems.
# If it contains results you don't want to keep, you may remove or edit it.
#
# By default, configure uses ./config.cache as the cache file,
# creating it if it does not exist already.  You can give configure
# the --cache-file=FILE option to use a different cache file; that is
# what configure does when it calls configure scripts in
# subdirectories, so they share the cache.
# Giving --cache-file=/dev/null disables caching, for debugging configure.
# config.status only pays attention to the cache file if you give it the
# --recheck option to rerun configure.
#
EOF
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
  case `(ac_space=' '; set | grep ac_space) 2>&1` in
  *ac_space=\ *)
    # `set' does not quote correctly, so add quotes (double-quote substitution
    # turns \\\\ into \\, and sed turns \\ into \).
    sed -n \
      -e "s/'/'\\\\''/g" \
      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
    ;;
  *)
    # `set' quotes correctly as required by POSIX, so do not add quotes.
    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
    ;;
  esac >> confcache
if cmp -s $cache_file confcache; then
  :
else
  if test -w $cache_file; then
    echo "updating cache $cache_file"
    cat confcache > $cache_file
  else
    echo "not updating unwritable cache $cache_file"
  fi
fi
rm -f confcache


if test "$build" != "$host" ; then
    CC=$host_alias-gcc
    CXX=$host_alias-c++
    AR=$host_alias-ar
    RANLIB=$host_alias-ranlib
    DLLTOOL=$host_alias-dlltool
    RESCOMP=$host_alias-windres
    LD=$host_alias-ld
    NM=$host_alias-nm
    STRIP=$host_alias-strip
fi

# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:6378: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_CC="gcc"
      break
    fi
  done
  IFS="$ac_save_ifs"
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
  echo "$ac_t""$CC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

if test -z "$CC"; then
  # Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:6408: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_prog_rejected=no
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
        ac_prog_rejected=yes
	continue
      fi
      ac_cv_prog_CC="cc"
      break
    fi
  done
  IFS="$ac_save_ifs"
if test $ac_prog_rejected = yes; then
  # We found a bogon in the path, so make sure we never use it.
  set dummy $ac_cv_prog_CC
  shift
  if test $# -gt 0; then
    # We chose a different compiler from the bogus one.
    # However, it has the same basename, so the bogon will be chosen
    # first if we set CC to just the basename; use the full file name.
    shift
    set dummy "$ac_dir/$ac_word" "$@"
    shift
    ac_cv_prog_CC="$@"
  fi
fi
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
  echo "$ac_t""$CC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

  if test -z "$CC"; then
    case "`uname -s`" in
    *win32* | *WIN32*)
      # Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:6459: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_CC="cl"
      break
    fi
  done
  IFS="$ac_save_ifs"
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
  echo "$ac_t""$CC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi
 ;;
    esac
  fi
  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi

echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
echo "configure:6491: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5

ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

cat > conftest.$ac_ext << EOF

#line 6502 "configure"
#include "confdefs.h"

main(){return(0);}
EOF
if { (eval echo configure:6507: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  ac_cv_prog_cc_works=yes
  # If we can't run a trivial program, we are probably using a cross compiler.
  if (./conftest; exit) 2>/dev/null; then
    ac_cv_prog_cc_cross=no
  else
    ac_cv_prog_cc_cross=yes
  fi
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  ac_cv_prog_cc_works=no
fi
rm -fr conftest*
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
if test $ac_cv_prog_cc_works = no; then
  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
echo "configure:6533: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross

echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
echo "configure:6538: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.c <<EOF
#ifdef __GNUC__
  yes;
#endif
EOF
if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:6547: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
  ac_cv_prog_gcc=yes
else
  ac_cv_prog_gcc=no
fi
fi

echo "$ac_t""$ac_cv_prog_gcc" 1>&6

if test $ac_cv_prog_gcc = yes; then
  GCC=yes
else
  GCC=
fi

ac_test_CFLAGS="${CFLAGS+set}"
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
echo "configure:6566: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  echo 'void f(){}' > conftest.c
if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
  ac_cv_prog_cc_g=yes
else
  ac_cv_prog_cc_g=no
fi
rm -f conftest*

fi

echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
if test "$ac_test_CFLAGS" = set; then
  CFLAGS="$ac_save_CFLAGS"
elif test $ac_cv_prog_cc_g = yes; then
  if test "$GCC" = yes; then
    CFLAGS="-g -O2"
  else
    CFLAGS="-g"
  fi
else
  if test "$GCC" = yes; then
    CFLAGS="-O2"
  else
    CFLAGS=
  fi
fi


CFLAGS=`echo "$CFLAGS" | sed 's/-g//g'`

echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
echo "configure:6601: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
  CPP=
fi
if test -z "$CPP"; then
if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
    # This must be in double quotes, not single quotes, because CPP may get
  # substituted into the Makefile and "${CC-cc}" will confuse make.
  CPP="${CC-cc} -E"
  # On the NeXT, cc -E runs the code through the compiler's parser,
  # not just through cpp.
  cat > conftest.$ac_ext <<EOF
#line 6616 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:6622: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  :
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  CPP="${CC-cc} -E -traditional-cpp"
  cat > conftest.$ac_ext <<EOF
#line 6633 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:6639: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  :
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  CPP="${CC-cc} -nologo -E"
  cat > conftest.$ac_ext <<EOF
#line 6650 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:6656: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  :
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  CPP=/lib/cpp
fi
rm -f conftest*
fi
rm -f conftest*
fi
rm -f conftest*
  ac_cv_prog_CPP="$CPP"
fi
  CPP="$ac_cv_prog_CPP"
else
  ac_cv_prog_CPP="$CPP"
fi
echo "$ac_t""$CPP" 1>&6


if test $ac_cv_prog_gcc = yes; then
    echo $ac_n "checking whether ${CC-cc} needs -traditional""... $ac_c" 1>&6
echo "configure:6683: checking whether ${CC-cc} needs -traditional" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc_traditional'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
    ac_pattern="Autoconf.*'x'"
  cat > conftest.$ac_ext <<EOF
#line 6689 "configure"
#include "confdefs.h"
#include <sgtty.h>
Autoconf TIOCGETP
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  egrep "$ac_pattern" >/dev/null 2>&1; then
  rm -rf conftest*
  ac_cv_prog_gcc_traditional=yes
else
  rm -rf conftest*
  ac_cv_prog_gcc_traditional=no
fi
rm -f conftest*


  if test $ac_cv_prog_gcc_traditional = no; then
    cat > conftest.$ac_ext <<EOF
#line 6707 "configure"
#include "confdefs.h"
#include <termio.h>
Autoconf TCGETA
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  egrep "$ac_pattern" >/dev/null 2>&1; then
  rm -rf conftest*
  ac_cv_prog_gcc_traditional=yes
fi
rm -f conftest*

  fi
fi

echo "$ac_t""$ac_cv_prog_gcc_traditional" 1>&6
  if test $ac_cv_prog_gcc_traditional = yes; then
    CC="$CC -traditional"
  fi
fi



ac_ext=C
# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cxx_cross


for ac_prog in $CCC c++ g++ gcc CC cxx cc++ cl
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:6743: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$CXX"; then
  ac_cv_prog_CXX="$CXX" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_CXX="$ac_prog"
      break
    fi
  done
  IFS="$ac_save_ifs"
fi
fi
CXX="$ac_cv_prog_CXX"
if test -n "$CXX"; then
  echo "$ac_t""$CXX" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

test -n "$CXX" && break
done
test -n "$CXX" || CXX="gcc"


echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6
echo "configure:6775: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5

ac_ext=C
# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cxx_cross

cat > conftest.$ac_ext << EOF

#line 6786 "configure"
#include "confdefs.h"

int main(){return(0);}
EOF
if { (eval echo configure:6791: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  ac_cv_prog_cxx_works=yes
  # If we can't run a trivial program, we are probably using a cross compiler.
  if (./conftest; exit) 2>/dev/null; then
    ac_cv_prog_cxx_cross=no
  else
    ac_cv_prog_cxx_cross=yes
  fi
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  ac_cv_prog_cxx_works=no
fi
rm -fr conftest*
ac_ext=C
# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cxx_cross

echo "$ac_t""$ac_cv_prog_cxx_works" 1>&6
if test $ac_cv_prog_cxx_works = no; then
  { echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
echo "configure:6817: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6
cross_compiling=$ac_cv_prog_cxx_cross

echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6
echo "configure:6822: checking whether we are using GNU C++" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.C <<EOF
#ifdef __GNUC__
  yes;
#endif
EOF
if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:6831: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
  ac_cv_prog_gxx=yes
else
  ac_cv_prog_gxx=no
fi
fi

echo "$ac_t""$ac_cv_prog_gxx" 1>&6

if test $ac_cv_prog_gxx = yes; then
  GXX=yes
else
  GXX=
fi

ac_test_CXXFLAGS="${CXXFLAGS+set}"
ac_save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS=
echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6
echo "configure:6850: checking whether ${CXX-g++} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  echo 'void f(){}' > conftest.cc
if test -z "`${CXX-g++} -g -c conftest.cc 2>&1`"; then
  ac_cv_prog_cxx_g=yes
else
  ac_cv_prog_cxx_g=no
fi
rm -f conftest*

fi

echo "$ac_t""$ac_cv_prog_cxx_g" 1>&6
if test "$ac_test_CXXFLAGS" = set; then
  CXXFLAGS="$ac_save_CXXFLAGS"
elif test $ac_cv_prog_cxx_g = yes; then
  if test "$GXX" = yes; then
    CXXFLAGS="-g -O2"
  else
    CXXFLAGS="-g"
  fi
else
  if test "$GXX" = yes; then
    CXXFLAGS="-O2"
  else
    CXXFLAGS=
  fi
fi


echo $ac_n "checking how to run the C++ preprocessor""... $ac_c" 1>&6
echo "configure:6883: checking how to run the C++ preprocessor" >&5
if test -z "$CXXCPP"; then
if eval "test \"`echo '$''{'ac_cv_prog_CXXCPP'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_ext=C
# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cxx_cross
  CXXCPP="${CXX-g++} -E"
  cat > conftest.$ac_ext <<EOF
#line 6896 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:6901: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  :
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  CXXCPP=/lib/cpp
fi
rm -f conftest*
  ac_cv_prog_CXXCPP="$CXXCPP"
ac_ext=C
# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cxx_cross
fi
fi
CXXCPP="$ac_cv_prog_CXXCPP"
echo "$ac_t""$CXXCPP" 1>&6


CXXFLAGS=`echo "$CXXFLAGS" | sed 's/-g//g'`

ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross


# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:6939: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$RANLIB"; then
  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_RANLIB="ranlib"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
fi
fi
RANLIB="$ac_cv_prog_RANLIB"
if test -n "$RANLIB"; then
  echo "$ac_t""$RANLIB" 1>&6
else
  echo "$ac_t""no" 1>&6
fi


# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:6970: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$AR"; then
  ac_cv_prog_AR="$AR" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_AR="ar"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
fi
fi
AR="$ac_cv_prog_AR"
if test -n "$AR"; then
  echo "$ac_t""$AR" 1>&6
else
  echo "$ac_t""no" 1>&6
fi


# Find a good install program.  We prefer a C program (faster),
# so one script is as good as another.  But avoid the broken or
# incompatible versions:
# SysV /etc/install, /usr/sbin/install
# SunOS /usr/etc/install
# IRIX /sbin/install
# AIX /bin/install
# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
# AFS /usr/afsws/bin/install, which mishandles nonexistent args
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
echo "configure:7010: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
  for ac_dir in $PATH; do
    # Account for people who put trailing slashes in PATH elements.
    case "$ac_dir/" in
    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
    *)
      # OSF1 and SCO ODT 3.0 have their own names for install.
      # Don't use installbsd from OSF since it installs stuff as root
      # by default.
      for ac_prog in ginstall scoinst install; do
        if test -f $ac_dir/$ac_prog; then
	  if test $ac_prog = install &&
            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
	    # AIX install.  It has an incompatible calling convention.
	    :
	  else
	    ac_cv_path_install="$ac_dir/$ac_prog -c"
	    break 2
	  fi
	fi
      done
      ;;
    esac
  done
  IFS="$ac_save_IFS"

fi
  if test "${ac_cv_path_install+set}" = set; then
    INSTALL="$ac_cv_path_install"
  else
    # As a last resort, use the slow shell script.  We don't cache a
    # path for INSTALL within a source directory, because that will
    # break other packages using the cache if that directory is
    # removed, or if the path is relative.
    INSTALL="$ac_install_sh"
  fi
fi
echo "$ac_t""$INSTALL" 1>&6

# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'

test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'

test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'


# Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:7066: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$STRIP"; then
  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_STRIP="strip"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP="true"
fi
fi
STRIP="$ac_cv_prog_STRIP"
if test -n "$STRIP"; then
  echo "$ac_t""$STRIP" 1>&6
else
  echo "$ac_t""no" 1>&6
fi


echo $ac_n "checking "make for VPATH support"""... $ac_c" 1>&6
echo "configure:7095: checking "make for VPATH support"" >&5
cat - << EOF > confMake
check : file
	cp \$? \$@
	cp \$? final_file
EOF

if test ! -d sub ; then
  mkdir sub
fi
echo dummy > sub/file
${MAKE-make} -f confMake VPATH=sub 2>&5 > /dev/null
RESULT=$?
rm -f sub/file check final_file confMake
rmdir sub
if test "$RESULT" = 0; then
  echo "$ac_t""yes" 1>&6
else
  echo "$ac_t""no" 1>&6
  { echo "configure: error: You need a make-utility that is able to use the variable
VPATH correctly.
If your version of make does not support VPATH correctly" 1>&2; exit 1; }
fi

for ac_prog in 'bison -y' byacc
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:7124: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$YACC"; then
  ac_cv_prog_YACC="$YACC" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_YACC="$ac_prog"
      break
    fi
  done
  IFS="$ac_save_ifs"
fi
fi
YACC="$ac_cv_prog_YACC"
if test -n "$YACC"; then
  echo "$ac_t""$YACC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

test -n "$YACC" && break
done
test -n "$YACC" || YACC="yacc"


# Extract the first word of "flex", so it can be a program name with args.
set dummy flex; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:7158: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$LEX"; then
  ac_cv_prog_LEX="$LEX" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_LEX="flex"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_prog_LEX" && ac_cv_prog_LEX="lex"
fi
fi
LEX="$ac_cv_prog_LEX"
if test -n "$LEX"; then
  echo "$ac_t""$LEX" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

if test -z "$LEXLIB"
then
  case "$LEX" in
  flex*) ac_lib=fl ;;
  *) ac_lib=l ;;
  esac
  echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
echo "configure:7192: checking for yywrap in -l$ac_lib" >&5
ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-l$ac_lib  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 7200 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char yywrap();

int main() {
yywrap()
; return 0; }
EOF
if { (eval echo configure:7211: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  LEXLIB="-l$ac_lib"
else
  echo "$ac_t""no" 1>&6
fi

fi


echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
echo "configure:7235: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  rm -f conftestdata
if ln -s X conftestdata 2>/dev/null
then
  rm -f conftestdata
  ac_cv_prog_LN_S="ln -s"
else
  ac_cv_prog_LN_S=ln
fi
fi
LN_S="$ac_cv_prog_LN_S"
if test "$ac_cv_prog_LN_S" = "ln -s"; then
  echo "$ac_t""yes" 1>&6
else
  echo "$ac_t""no" 1>&6
fi



SEARCH_INCLUDE="\
    /usr/local/include        \
                              \
    /usr/Motif-1.2/include    \
    /usr/Motif-2.1/include    \
                              \
    /usr/include/Motif1.2     \
    /opt/xpm/include/X11      \
    /opt/GBxpm/include/       \
    /opt/GBxpm/X11/include/   \
                              \
    /usr/Motif1.2/include     \
    /usr/dt/include           \
    /usr/openwin/include      \
                              \
    /usr/include/Xm           \
                              \
    /usr/X11R6/include        \
    /usr/X11R6.4/include      \
    /usr/X11R5/include        \
    /usr/X11R4/include        \
                              \
    /usr/include/X11R6        \
    /usr/include/X11R5        \
    /usr/include/X11R4        \
                              \
    /usr/local/X11R6/include  \
    /usr/local/X11R5/include  \
    /usr/local/X11R4/include  \
                              \
    /usr/local/include/X11R6  \
    /usr/local/include/X11R5  \
    /usr/local/include/X11R4  \
                              \
    /usr/X11/include          \
    /usr/include/X11          \
    /usr/local/X11/include    \
    /usr/local/include/X11    \
                              \
    /usr/X386/include         \
    /usr/x386/include         \
    /usr/XFree86/include/X11  \
                              \
    X:/XFree86/include        \
    X:/XFree86/include/X11    \
                              \
    /usr/include/gtk          \
    /usr/local/include/gtk    \
    /usr/include/glib         \
    /usr/local/include/glib   \
                              \
    /usr/include/qt           \
    /usr/local/include/qt     \
                              \
    /usr/include/windows      \
    /usr/include/wine         \
    /usr/local/include/wine   \
                              \
    /usr/unsupported/include  \
    /usr/athena/include       \
    /usr/local/x11r5/include  \
    /usr/lpp/Xamples/include  \
                              \
    /usr/openwin/share/include \
                               \
    /usr/include"

SEARCH_LIB="`echo "$SEARCH_INCLUDE" | sed s/include/lib/g` "


cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs.  It is not useful on other systems.
# If it contains results you don't want to keep, you may remove or edit it.
#
# By default, configure uses ./config.cache as the cache file,
# creating it if it does not exist already.  You can give configure
# the --cache-file=FILE option to use a different cache file; that is
# what configure does when it calls configure scripts in
# subdirectories, so they share the cache.
# Giving --cache-file=/dev/null disables caching, for debugging configure.
# config.status only pays attention to the cache file if you give it the
# --recheck option to rerun configure.
#
EOF
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
  case `(ac_space=' '; set | grep ac_space) 2>&1` in
  *ac_space=\ *)
    # `set' does not quote correctly, so add quotes (double-quote substitution
    # turns \\\\ into \\, and sed turns \\ into \).
    sed -n \
      -e "s/'/'\\\\''/g" \
      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
    ;;
  *)
    # `set' quotes correctly as required by POSIX, so do not add quotes.
    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
    ;;
  esac >> confcache
if cmp -s $cache_file confcache; then
  :
else
  if test -w $cache_file; then
    echo "updating cache $cache_file"
    cat confcache > $cache_file
  else
    echo "not updating unwritable cache $cache_file"
  fi
fi
rm -f confcache



AFMINSTALL=

if test "$wxUSE_GUI" = "yes"; then

USE_GUI=1

TOOLKIT=
TOOLKIT_INCLUDE=

GUI_TK_LIBRARY=
GUI_TK_LINK=

WXGTK12=
WXGTK127=
WXGTK20=

WXWINE=

if test "$wxUSE_CYGWIN" = 1 || test "$wxUSE_MINGW" = 1 ; then
    if test "$cross_compiling" = "yes" ; then
                echo "configure: warning: skipping windows.h check for cross-compilation" 1>&2
    else
        echo $ac_n "checking for Windows headers""... $ac_c" 1>&6
echo "configure:7399: checking for Windows headers" >&5
        
ac_find_includes=
for ac_dir in $SEARCH_INCLUDE;
  do
    if test -f "$ac_dir/windows.h"; then
      ac_find_includes=$ac_dir
      break
    fi
  done

        if test "$ac_find_includes" != "" ; then
            echo "$ac_t""found $ac_find_includes" 1>&6
            TOOLKIT_INCLUDE="$TOOLKIT_INCLUDE -I$ac_find_includes"
        else
            echo "$ac_t""no" 1>&6
            { echo "configure: error: please set CFLAGS to contain the location of windows.h" 1>&2; exit 1; }
        fi
    fi

    INCLUDE_SUBDIRS="$INCLUDE_SUBDIRS msw"
            LIBS="$LIBS -lkernel32 -luser32 -lgdi32 -lcomdlg32 -lwinspool -lwinmm -lshell32 -lcomctl32 -lctl3d32 -lcrtdll -ladvapi32 -lwsock32"

        if test "$wxUSE_ODBC" = "yes" ; then
        LIBS="$LIBS -lodbc32 -lole32 -loleaut32"
    fi

        if test "$wxUSE_MINGW" = 1; then
        LDFLAGS="$LDFLAGS -mwindows"
    fi

    TOOLKIT=MSW
    GUIDIST=MSW_DIST

        RCINCSWITCH="--include-dir"
    RCDEFSWITCH="--define"
    RCPREPROCESSOR="--preprocessor \"\$(CC) -c -E -xc-header -DRC_INVOKED\""
    RCINPUTSWITCH="-i"
    RCOUTPUTSWITCH="-o"
    RESFLAGS="$RCPREPROCESSOR $RCINCSWITCH \$(top_srcdir)/include $RCINCSWITCH \$(top_srcdir)/\$(program_dir) $RCDEFSWITCH __WIN32__ $RCDEFSWITCH __WIN95__ $RCDEFSWITCH __GNUWIN32__"

        RESPROGRAM="\$(RES_PROGRAM)"

fi

if test "$wxUSE_GTK" = 1; then
            # Check whether --with-gtk-prefix or --without-gtk-prefix was given.
if test "${with_gtk_prefix+set}" = set; then
  withval="$with_gtk_prefix"
  gtk_config_prefix="$withval"
else
  gtk_config_prefix=""
fi

# Check whether --with-gtk-exec-prefix or --without-gtk-exec-prefix was given.
if test "${with_gtk_exec_prefix+set}" = set; then
  withval="$with_gtk_exec_prefix"
  gtk_config_exec_prefix="$withval"
else
  gtk_config_exec_prefix=""
fi

# Check whether --enable-gtktest or --disable-gtktest was given.
if test "${enable_gtktest+set}" = set; then
  enableval="$enable_gtktest"
  :
else
  enable_gtktest=yes
fi


  for module in . gthread
  do
      case "$module" in
         gthread) 
             gtk_config_args="$gtk_config_args gthread"
         ;;
      esac
  done

  if test x$gtk_config_exec_prefix != x ; then
     gtk_config_args="$gtk_config_args --exec-prefix=$gtk_config_exec_prefix"
     if test x${GTK_CONFIG_2_0+set} != xset ; then
        GTK_CONFIG_2_0=$gtk_config_exec_prefix/bin/gtk-config-2.0
     fi
  fi
  if test x$gtk_config_prefix != x ; then
     gtk_config_args="$gtk_config_args --prefix=$gtk_config_prefix"
     if test x${GTK_CONFIG_2_0+set} != xset ; then
        GTK_CONFIG_2_0=$gtk_config_prefix/bin/gtk-config-2.0
     fi
  fi

  # Extract the first word of "gtk-config-2.0", so it can be a program name with args.
set dummy gtk-config-2.0; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:7495: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GTK_CONFIG_2_0'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$GTK_CONFIG_2_0" in
  /*)
  ac_cv_path_GTK_CONFIG_2_0="$GTK_CONFIG_2_0" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_GTK_CONFIG_2_0="$GTK_CONFIG_2_0" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_GTK_CONFIG_2_0="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_GTK_CONFIG_2_0" && ac_cv_path_GTK_CONFIG_2_0="no"
  ;;
esac
fi
GTK_CONFIG_2_0="$ac_cv_path_GTK_CONFIG_2_0"
if test -n "$GTK_CONFIG_2_0"; then
  echo "$ac_t""$GTK_CONFIG_2_0" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

  min_gtk_version=1.3.1
  echo $ac_n "checking for GTK - version >= $min_gtk_version""... $ac_c" 1>&6
echo "configure:7530: checking for GTK - version >= $min_gtk_version" >&5
  no_gtk=""
  if test "$GTK_CONFIG_2_0" = "no" ; then
    no_gtk=yes
  else
    GTK_CFLAGS=`$GTK_CONFIG_2_0 $gtk_config_args --cflags`
    GTK_LIBS=`$GTK_CONFIG_2_0 $gtk_config_args --libs`
    gtk_config_major_version=`$GTK_CONFIG_2_0 $gtk_config_args --version | \
           sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'`
    gtk_config_minor_version=`$GTK_CONFIG_2_0 $gtk_config_args --version | \
           sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'`
    gtk_config_micro_version=`$GTK_CONFIG_2_0 $gtk_config_args --version | \
           sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'`
    if test "x$enable_gtktest" = "xyes" ; then
      ac_save_CFLAGS="$CFLAGS"
      ac_save_LIBS="$LIBS"
      CFLAGS="$CFLAGS $GTK_CFLAGS"
      LIBS="$GTK_LIBS $LIBS"
      rm -f conf.gtktest
      if test "$cross_compiling" = yes; then
  echo $ac_n "cross compiling; assumed OK... $ac_c"
else
  cat > conftest.$ac_ext <<EOF
#line 7553 "configure"
#include "confdefs.h"

#include <gtk/gtk.h>
#include <stdio.h>
#include <stdlib.h>

int 
main ()
{
  int major, minor, micro;
  char *tmp_version;

  system ("touch conf.gtktest");

  /* HP/UX 9 (%@#!) writes to sscanf strings */
  tmp_version = g_strdup("$min_gtk_version");
  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
     printf("%s, bad version string\n", "$min_gtk_version");
     exit(1);
   }

  if ((gtk_major_version != $gtk_config_major_version) ||
      (gtk_minor_version != $gtk_config_minor_version) ||
      (gtk_micro_version != $gtk_config_micro_version))
    {
      printf("\n*** 'gtk-config-2.0 --version' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n", 
             $gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version,
             gtk_major_version, gtk_minor_version, gtk_micro_version);
      printf ("*** was found! If gtk-config-2.0 was correct, then it is best\n");
      printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n");
      printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
      printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
      printf("*** required on your system.\n");
      printf("*** If gtk-config-2.0 was wrong, set the environment variable GTK_CONFIG_2_0\n");
      printf("*** to point to the correct copy of gtk-config-2.0, and remove the file config.cache\n");
      printf("*** before re-running configure\n");
    } 
#if defined (GTK_MAJOR_VERSION) && defined (GTK_MINOR_VERSION) && defined (GTK_MICRO_VERSION)
  else if ((gtk_major_version != GTK_MAJOR_VERSION) ||
	   (gtk_minor_version != GTK_MINOR_VERSION) ||
           (gtk_micro_version != GTK_MICRO_VERSION))
    {
      printf("*** GTK+ header files (version %d.%d.%d) do not match\n",
	     GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION);
      printf("*** library (version %d.%d.%d)\n",
	     gtk_major_version, gtk_minor_version, gtk_micro_version);
    }
#endif /* defined (GTK_MAJOR_VERSION) ... */
  else
    {
      if ((gtk_major_version > major) ||
        ((gtk_major_version == major) && (gtk_minor_version > minor)) ||
        ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro)))
      {
        return 0;
       }
     else
      {
        printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n",
               gtk_major_version, gtk_minor_version, gtk_micro_version);
        printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n",
	       major, minor, micro);
        printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n");
        printf("***\n");
        printf("*** If you have already installed a sufficiently new version, this error\n");
        printf("*** probably means that the wrong copy of the gtk-config-2.0 shell script is\n");
        printf("*** being found. The easiest way to fix this is to remove the old version\n");
        printf("*** of GTK+, but you can also set the GTK_CONFIG_2_0 environment to point to the\n");
        printf("*** correct copy of gtk-config-2.0. (In this case, you will have to\n");
        printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
        printf("*** so that the correct libraries are found at run-time))\n");
      }
    }
  return 1;
}

EOF
if { (eval echo configure:7631: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  :
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  no_gtk=yes
fi
rm -fr conftest*
fi

       CFLAGS="$ac_save_CFLAGS"
       LIBS="$ac_save_LIBS"
     fi
  fi
  if test "x$no_gtk" = x ; then
     echo "$ac_t""yes (version $gtk_config_major_version.$gtk_config_minor_version.$gtk_config_micro_version)" 1>&6
     WXGTK20=1     
  else
     echo "$ac_t""no" 1>&6
     if test "$GTK_CONFIG_2_0" = "no" ; then
       echo "*** The gtk-config-2.0 script installed by GTK could not be found"
       echo "*** If GTK was installed in PREFIX, make sure PREFIX/bin is in"
       echo "*** your path, or set the GTK_CONFIG_2_0 environment variable to the"
       echo "*** full path to gtk-config-2.0."
     else
       if test -f conf.gtktest ; then
        :
       else
          echo "*** Could not run GTK test program, checking why..."
          CFLAGS="$CFLAGS $GTK_CFLAGS"
          LIBS="$LIBS $GTK_LIBS"
          cat > conftest.$ac_ext <<EOF
#line 7665 "configure"
#include "confdefs.h"

#include <gtk/gtk.h>
#include <stdio.h>

int main() {
 return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); 
; return 0; }
EOF
if { (eval echo configure:7675: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
   echo "*** The test program compiled, but did not run. This usually means"
          echo "*** that the run-time linker is not finding GTK or finding the wrong"
          echo "*** version of GTK. If it is not finding GTK, you'll need to set your"
          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
          echo "*** is required on your system"
	  echo "***"
          echo "*** If you have an old version installed, it is best to remove it, although"
          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
          echo "***"
          echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
          echo "*** came with the system with the command"
          echo "***"
          echo "***    rpm --erase --nodeps gtk gtk-devel" 
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
   echo "*** The test program failed to compile or link. See the file config.log for the"
          echo "*** exact error that occured. This usually means GTK was incorrectly installed"
          echo "*** or that you have moved GTK since it was installed. In the latter case, you"
          echo "*** may want to edit the gtk-config-2.0 script: $GTK_CONFIG_2_0" 
fi
rm -f conftest*
          CFLAGS="$ac_save_CFLAGS"
          LIBS="$ac_save_LIBS"
       fi
     fi
     GTK_CFLAGS=""
     GTK_LIBS=""
     
      
  if test x$gtk_config_exec_prefix != x ; then
     gtk_config_args="$gtk_config_args --exec-prefix=$gtk_config_exec_prefix"
     if test x${GTK_CONFIG+set} != xset ; then
        GTK_CONFIG=$gtk_config_exec_prefix/bin/gtk-config
     fi
  fi
  if test x$gtk_config_prefix != x ; then
     gtk_config_args="$gtk_config_args --prefix=$gtk_config_prefix"
     if test x${GTK_CONFIG+set} != xset ; then
        GTK_CONFIG=$gtk_config_prefix/bin/gtk-config
     fi
  fi

  # Extract the first word of "gtk-config", so it can be a program name with args.
set dummy gtk-config; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:7725: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GTK_CONFIG'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$GTK_CONFIG" in
  /*)
  ac_cv_path_GTK_CONFIG="$GTK_CONFIG" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_GTK_CONFIG="$GTK_CONFIG" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_GTK_CONFIG="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_GTK_CONFIG" && ac_cv_path_GTK_CONFIG="no"
  ;;
esac
fi
GTK_CONFIG="$ac_cv_path_GTK_CONFIG"
if test -n "$GTK_CONFIG"; then
  echo "$ac_t""$GTK_CONFIG" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

  min_gtk_version=1.2.7
  echo $ac_n "checking for GTK - version >= $min_gtk_version""... $ac_c" 1>&6
echo "configure:7760: checking for GTK - version >= $min_gtk_version" >&5
  no_gtk=""
  if test "$GTK_CONFIG" != "no" ; then
    GTK_CFLAGS=`$GTK_CONFIG --cflags`
    GTK_LIBS=`$GTK_CONFIG --libs gthread`
    ac_save_CFLAGS="$CFLAGS"
    ac_save_LIBS="$LIBS"
    CFLAGS="$CFLAGS $GTK_CFLAGS"
    LIBS="$LIBS $GTK_LIBS"
    if test "$cross_compiling" = yes; then
  echo $ac_n "cross compiling; assumed OK... $ac_c"
else
  cat > conftest.$ac_ext <<EOF
#line 7773 "configure"
#include "confdefs.h"

#include <gtk/gtk.h>
#include <gtk/gtkfeatures.h>
#include <stdio.h>
#include <stdlib.h>

int
main ()
{
  int major, minor, micro;

  if (sscanf("$min_gtk_version", "%d.%d.%d", &major, &minor, &micro) != 3) {
     printf("%s, bad version string\n", "$min_gtk_version");
     exit(1);
   }

   if ((GTK_MAJOR_VERSION != gtk_major_version) ||
       (GTK_MINOR_VERSION != gtk_minor_version) ||
       (GTK_MICRO_VERSION != gtk_micro_version)) {
     printf("Headers vs. library version mismatch!\n");
     exit(1);
   }

   if (gtk_minor_version == 1) return FALSE;

   return !((gtk_major_version > major) ||
    ((gtk_major_version == major) && (gtk_minor_version > minor)) ||
    ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro)));
}

EOF
if { (eval echo configure:7806: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  :
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  no_gtk=yes
fi
rm -fr conftest*
fi

     CFLAGS="$ac_save_CFLAGS"
     LIBS="$ac_save_LIBS"
  else
     no_gtk=yes
  fi
  if test "x$no_gtk" = x ; then
     echo "$ac_t""yes" 1>&6
     WXGTK127=1
  else
     echo "$ac_t""no" 1>&6
     GTK_CFLAGS=""
     GTK_LIBS=""
     :
  fi
  
  

      
  if test x$gtk_config_exec_prefix != x ; then
     gtk_config_args="$gtk_config_args --exec-prefix=$gtk_config_exec_prefix"
     if test x${GTK_CONFIG+set} != xset ; then
        GTK_CONFIG=$gtk_config_exec_prefix/bin/gtk-config
     fi
  fi
  if test x$gtk_config_prefix != x ; then
     gtk_config_args="$gtk_config_args --prefix=$gtk_config_prefix"
     if test x${GTK_CONFIG+set} != xset ; then
        GTK_CONFIG=$gtk_config_prefix/bin/gtk-config
     fi
  fi

  # Extract the first word of "gtk-config", so it can be a program name with args.
set dummy gtk-config; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:7852: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GTK_CONFIG'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$GTK_CONFIG" in
  /*)
  ac_cv_path_GTK_CONFIG="$GTK_CONFIG" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_GTK_CONFIG="$GTK_CONFIG" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_GTK_CONFIG="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_GTK_CONFIG" && ac_cv_path_GTK_CONFIG="no"
  ;;
esac
fi
GTK_CONFIG="$ac_cv_path_GTK_CONFIG"
if test -n "$GTK_CONFIG"; then
  echo "$ac_t""$GTK_CONFIG" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

  min_gtk_version=1.2.3
  echo $ac_n "checking for GTK - version >= $min_gtk_version""... $ac_c" 1>&6
echo "configure:7887: checking for GTK - version >= $min_gtk_version" >&5
  no_gtk=""
  if test "$GTK_CONFIG" != "no" ; then
    GTK_CFLAGS=`$GTK_CONFIG --cflags`
    GTK_LIBS=`$GTK_CONFIG --libs gthread`
    ac_save_CFLAGS="$CFLAGS"
    ac_save_LIBS="$LIBS"
    CFLAGS="$CFLAGS $GTK_CFLAGS"
    LIBS="$LIBS $GTK_LIBS"
    if test "$cross_compiling" = yes; then
  echo $ac_n "cross compiling; assumed OK... $ac_c"
else
  cat > conftest.$ac_ext <<EOF
#line 7900 "configure"
#include "confdefs.h"

#include <gtk/gtk.h>
#include <gtk/gtkfeatures.h>
#include <stdio.h>
#include <stdlib.h>

int
main ()
{
  int major, minor, micro;

  if (sscanf("$min_gtk_version", "%d.%d.%d", &major, &minor, &micro) != 3) {
     printf("%s, bad version string\n", "$min_gtk_version");
     exit(1);
   }

   if ((GTK_MAJOR_VERSION != gtk_major_version) ||
       (GTK_MINOR_VERSION != gtk_minor_version) ||
       (GTK_MICRO_VERSION != gtk_micro_version)) {
     printf("Headers vs. library version mismatch!\n");
     exit(1);
   }

   if (gtk_minor_version == 1) return FALSE;

   return !((gtk_major_version > major) ||
    ((gtk_major_version == major) && (gtk_minor_version > minor)) ||
    ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro)));
}

EOF
if { (eval echo configure:7933: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  :
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  no_gtk=yes
fi
rm -fr conftest*
fi

     CFLAGS="$ac_save_CFLAGS"
     LIBS="$ac_save_LIBS"
  else
     no_gtk=yes
  fi
  if test "x$no_gtk" = x ; then
     echo "$ac_t""yes" 1>&6
     WXGTK12=1
  else
     echo "$ac_t""no" 1>&6
     GTK_CFLAGS=""
     GTK_LIBS=""
     :
  fi
  
  

    
  fi
  
  
  rm -f conf.gtktest


    if test "$WXGTK12" != 1 -a "$WXGTK20" != 1; then
        { echo "configure: error: 
            Please check that gtk-config is in path, the directory
            where GTK+ libraries are installed (returned by
            'gtk-config --libs' command) is in LD_LIBRARY_PATH or
            equivalent variable and GTK+ is version 1.2.3 or above.
        " 1>&2; exit 1; }
    fi

    TOOLKIT_INCLUDE="$GTK_CFLAGS"


    GUI_TK_LIBRARY="$GTK_LIBS"


    AFMINSTALL=afminstall
    TOOLKIT=GTK
    GUIDIST=GTK_DIST

        echo $ac_n "checking for gdk_im_open in -lgdk""... $ac_c" 1>&6
echo "configure:7989: checking for gdk_im_open in -lgdk" >&5
ac_lib_var=`echo gdk'_'gdk_im_open | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lgdk  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 7997 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char gdk_im_open();

int main() {
gdk_im_open()
; return 0; }
EOF
if { (eval echo configure:8008: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  cat >> confdefs.h <<\EOF
#define HAVE_XIM 1
EOF

else
  echo "$ac_t""no" 1>&6
fi

fi

if test "$wxUSE_WINE" = 1; then
    echo $ac_n "checking for WINE includes""... $ac_c" 1>&6
echo "configure:8035: checking for WINE includes" >&5
    
ac_find_includes=
for ac_dir in $SEARCH_INCLUDE;
  do
    if test -f "$ac_dir/windows.h"; then
      ac_find_includes=$ac_dir
      break
    fi
  done

    if test "$ac_find_includes" != "" ; then
        echo "$ac_t""found $ac_find_includes" 1>&6
        TOOLKIT_INCLUDE="$TOOLKIT_INCLUDE -I$ac_find_includes"
    else
        echo "$ac_t""no" 1>&6
        { echo "configure: error: please set CFLAGS to contain the location of windows.h" 1>&2; exit 1; }
    fi

    XPM_LINK=""
    echo $ac_n "checking for Xpm library""... $ac_c" 1>&6
echo "configure:8056: checking for Xpm library" >&5
    
ac_find_libraries=
for ac_dir in $SEARCH_LIB;
  do
    for ac_extension in a so sl; do
      if test -f "$ac_dir/libXpm.$ac_extension"; then
        ac_find_libraries=$ac_dir
        break 2
      fi
    done
  done

    if test "$ac_find_libraries" != "" ; then
        GUI_TK_LIBRARY="-L$ac_find_libraries"
        XPM_LINK="-lXpm"
        cat >> confdefs.h <<\EOF
#define wxHAVE_LIB_XPM 1
EOF

        echo "$ac_t""found at $ac_find_libraries" 1>&6
    else
        echo "$ac_t""no" 1>&6
        echo "configure: warning: library will be compiled without support for images in XPM format" 1>&2
    fi

    MESA_LINK=""
    echo $ac_n "checking for Mesa library""... $ac_c" 1>&6
echo "configure:8084: checking for Mesa library" >&5
    
ac_find_libraries=
for ac_dir in $SEARCH_LIB;
  do
    for ac_extension in a so sl; do
      if test -f "$ac_dir/libMesaGL.$ac_extension"; then
        ac_find_libraries=$ac_dir
        break 2
      fi
    done
  done

    if test "$ac_find_libraries" != "" ; then
        GUI_TK_LIBRARY="$GUI_TK_LIBRARY -L$ac_find_libraries"
        MESA_LINK="-lMesaGL"
        echo "$ac_t""found at $ac_find_libraries" 1>&6
    else
        { echo "configure: error: no" 1>&2; exit 1; }
    fi

    GUI_TK_LINK="-lwine $MESA_LINK $XPM_LINK -lXxf86dga -lXxf86vm -lSM -lICE -lXext -lXmu -lX11 -lncurses"
    GUI_TK_LIBRARY="$GUI_TK_LIBRARY $GUI_TK_LINK"
    WXWINE=1
    TOOLKIT=MSW
    GUIDIST=MSW_DIST
fi


# If we find X, set shell vars x_includes and x_libraries to the
# paths, otherwise set no_x=yes.
# Uses ac_ vars as temps to allow command line to override cache and checks.
# --without-x overrides everything else, but does not touch the cache.
echo $ac_n "checking for X""... $ac_c" 1>&6
echo "configure:8118: checking for X" >&5

# Check whether --with-x or --without-x was given.
if test "${with_x+set}" = set; then
  withval="$with_x"
  :
fi

# $have_x is `yes', `no', `disabled', or empty when we do not yet know.
if test "x$with_x" = xno; then
  # The user explicitly disabled X.
  have_x=disabled
else
  if test "x$x_includes" != xNONE && test "x$x_libraries" != xNONE; then
    # Both variables are already set.
    have_x=yes
  else
if eval "test \"`echo '$''{'ac_cv_have_x'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  # One or both of the vars are not set, and there is no cached value.
ac_x_includes=NO ac_x_libraries=NO
rm -fr conftestdir
if mkdir conftestdir; then
  cd conftestdir
  # Make sure to not put "make" in the Imakefile rules, since we grep it out.
  cat > Imakefile <<'EOF'
acfindx:
	@echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"'
EOF
  if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then
    # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
    eval `${MAKE-make} acfindx 2>/dev/null | grep -v make`
    # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR.
    for ac_extension in a so sl; do
      if test ! -f $ac_im_usrlibdir/libX11.$ac_extension &&
        test -f $ac_im_libdir/libX11.$ac_extension; then
        ac_im_usrlibdir=$ac_im_libdir; break
      fi
    done
    # Screen out bogus values from the imake configuration.  They are
    # bogus both because they are the default anyway, and because
    # using them would break gcc on systems where it needs fixed includes.
    case "$ac_im_incroot" in
	/usr/include) ;;
	*) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes="$ac_im_incroot" ;;
    esac
    case "$ac_im_usrlibdir" in
	/usr/lib | /lib) ;;
	*) test -d "$ac_im_usrlibdir" && ac_x_libraries="$ac_im_usrlibdir" ;;
    esac
  fi
  cd ..
  rm -fr conftestdir
fi

if test "$ac_x_includes" = NO; then
  # Guess where to find include files, by looking for this one X11 .h file.
  test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h

  # First, try using that file with no special directory specified.
cat > conftest.$ac_ext <<EOF
#line 8180 "configure"
#include "confdefs.h"
#include <$x_direct_test_include>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:8185: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  # We can compile using X headers with no special include directory.
ac_x_includes=
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  # Look for the header file in a standard set of common directories.
# Check X11 before X11Rn because it is often a symlink to the current release.
  for ac_dir in               \
    /usr/X11/include          \
    /usr/X11R6/include        \
    /usr/X11R5/include        \
    /usr/X11R4/include        \
                              \
    /usr/include/X11          \
    /usr/include/X11R6        \
    /usr/include/X11R5        \
    /usr/include/X11R4        \
                              \
    /usr/local/X11/include    \
    /usr/local/X11R6/include  \
    /usr/local/X11R5/include  \
    /usr/local/X11R4/include  \
                              \
    /usr/local/include/X11    \
    /usr/local/include/X11R6  \
    /usr/local/include/X11R5  \
    /usr/local/include/X11R4  \
                              \
    /usr/X386/include         \
    /usr/x386/include         \
    /usr/XFree86/include/X11  \
                              \
    /usr/include              \
    /usr/local/include        \
    /usr/unsupported/include  \
    /usr/athena/include       \
    /usr/local/x11r5/include  \
    /usr/lpp/Xamples/include  \
                              \
    /usr/openwin/include      \
    /usr/openwin/share/include \
    ; \
  do
    if test -r "$ac_dir/$x_direct_test_include"; then
      ac_x_includes=$ac_dir
      break
    fi
  done
fi
rm -f conftest*
fi # $ac_x_includes = NO

if test "$ac_x_libraries" = NO; then
  # Check for the libraries.

  test -z "$x_direct_test_library" && x_direct_test_library=Xt
  test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc

  # See if we find them without any special options.
  # Don't add to $LIBS permanently.
  ac_save_LIBS="$LIBS"
  LIBS="-l$x_direct_test_library $LIBS"
cat > conftest.$ac_ext <<EOF
#line 8254 "configure"
#include "confdefs.h"

int main() {
${x_direct_test_function}()
; return 0; }
EOF
if { (eval echo configure:8261: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  LIBS="$ac_save_LIBS"
# We can link X programs with no special library path.
ac_x_libraries=
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  LIBS="$ac_save_LIBS"
# First see if replacing the include by lib works.
# Check X11 before X11Rn because it is often a symlink to the current release.
for ac_dir in `echo "$ac_x_includes" | sed s/include/lib/` \
    /usr/X11/lib          \
    /usr/X11R6/lib        \
    /usr/X11R5/lib        \
    /usr/X11R4/lib        \
                          \
    /usr/lib/X11          \
    /usr/lib/X11R6        \
    /usr/lib/X11R5        \
    /usr/lib/X11R4        \
                          \
    /usr/local/X11/lib    \
    /usr/local/X11R6/lib  \
    /usr/local/X11R5/lib  \
    /usr/local/X11R4/lib  \
                          \
    /usr/local/lib/X11    \
    /usr/local/lib/X11R6  \
    /usr/local/lib/X11R5  \
    /usr/local/lib/X11R4  \
                          \
    /usr/X386/lib         \
    /usr/x386/lib         \
    /usr/XFree86/lib/X11  \
                          \
    /usr/lib              \
    /usr/local/lib        \
    /usr/unsupported/lib  \
    /usr/athena/lib       \
    /usr/local/x11r5/lib  \
    /usr/lpp/Xamples/lib  \
    /lib/usr/lib/X11	  \
                          \
    /usr/openwin/lib      \
    /usr/openwin/share/lib \
    ; \
do
  for ac_extension in a so sl; do
    if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then
      ac_x_libraries=$ac_dir
      break 2
    fi
  done
done
fi
rm -f conftest*
fi # $ac_x_libraries = NO

if test "$ac_x_includes" = NO || test "$ac_x_libraries" = NO; then
  # Didn't find X anywhere.  Cache the known absence of X.
  ac_cv_have_x="have_x=no"
else
  # Record where we found X for the cache.
  ac_cv_have_x="have_x=yes \
	        ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries"
fi
fi
  fi
  eval "$ac_cv_have_x"
fi # $with_x != no

if test "$have_x" != yes; then
  echo "$ac_t""$have_x" 1>&6
  no_x=yes
else
  # If each of the values was on the command line, it overrides each guess.
  test "x$x_includes" = xNONE && x_includes=$ac_x_includes
  test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries
  # Update the cache value to reflect the command line values.
  ac_cv_have_x="have_x=yes \
		ac_x_includes=$x_includes ac_x_libraries=$x_libraries"
  echo "$ac_t""libraries $x_libraries, headers $x_includes" 1>&6
fi

if test "$no_x" = yes; then
  # Not all programs may use this symbol, but it does not hurt to define it.
  cat >> confdefs.h <<\EOF
#define X_DISPLAY_MISSING 1
EOF

  X_CFLAGS= X_PRE_LIBS= X_LIBS= X_EXTRA_LIBS=
else
  if test -n "$x_includes"; then
    X_CFLAGS="$X_CFLAGS -I$x_includes"
  fi

  # It would also be nice to do this for all -L options, not just this one.
  if test -n "$x_libraries"; then
    X_LIBS="$X_LIBS -L$x_libraries"
    # For Solaris; some versions of Sun CC require a space after -R and
    # others require no space.  Words are not sufficient . . . .
    case "`(uname -sr) 2>/dev/null`" in
    "SunOS 5"*)
      echo $ac_n "checking whether -R must be followed by a space""... $ac_c" 1>&6
echo "configure:8367: checking whether -R must be followed by a space" >&5
      ac_xsave_LIBS="$LIBS"; LIBS="$LIBS -R$x_libraries"
      cat > conftest.$ac_ext <<EOF
#line 8370 "configure"
#include "confdefs.h"

int main() {

; return 0; }
EOF
if { (eval echo configure:8377: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  ac_R_nospace=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_R_nospace=no
fi
rm -f conftest*
      if test $ac_R_nospace = yes; then
	echo "$ac_t""no" 1>&6
	X_LIBS="$X_LIBS -R$x_libraries"
      else
	LIBS="$ac_xsave_LIBS -R $x_libraries"
	cat > conftest.$ac_ext <<EOF
#line 8393 "configure"
#include "confdefs.h"

int main() {

; return 0; }
EOF
if { (eval echo configure:8400: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  ac_R_space=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_R_space=no
fi
rm -f conftest*
	if test $ac_R_space = yes; then
	  echo "$ac_t""yes" 1>&6
	  X_LIBS="$X_LIBS -R $x_libraries"
	else
	  echo "$ac_t""neither works" 1>&6
	fi
      fi
      LIBS="$ac_xsave_LIBS"
    esac
  fi

  # Check for system-dependent libraries X programs must link with.
  # Do this before checking for the system-independent R6 libraries
  # (-lICE), since we may need -lsocket or whatever for X linking.

  if test "$ISC" = yes; then
    X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl_s -linet"
  else
    # Martyn.Johnson@cl.cam.ac.uk says this is needed for Ultrix, if the X
    # libraries were built with DECnet support.  And karl@cs.umb.edu says
    # the Alpha needs dnet_stub (dnet does not exist).
    echo $ac_n "checking for dnet_ntoa in -ldnet""... $ac_c" 1>&6
echo "configure:8432: checking for dnet_ntoa in -ldnet" >&5
ac_lib_var=`echo dnet'_'dnet_ntoa | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-ldnet  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 8440 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char dnet_ntoa();

int main() {
dnet_ntoa()
; return 0; }
EOF
if { (eval echo configure:8451: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"
else
  echo "$ac_t""no" 1>&6
fi

    if test $ac_cv_lib_dnet_dnet_ntoa = no; then
      echo $ac_n "checking for dnet_ntoa in -ldnet_stub""... $ac_c" 1>&6
echo "configure:8473: checking for dnet_ntoa in -ldnet_stub" >&5
ac_lib_var=`echo dnet_stub'_'dnet_ntoa | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-ldnet_stub  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 8481 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char dnet_ntoa();

int main() {
dnet_ntoa()
; return 0; }
EOF
if { (eval echo configure:8492: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"
else
  echo "$ac_t""no" 1>&6
fi

    fi

    # msh@cis.ufl.edu says -lnsl (and -lsocket) are needed for his 386/AT,
    # to get the SysV transport functions.
    # chad@anasazi.com says the Pyramis MIS-ES running DC/OSx (SVR4)
    # needs -lnsl.
    # The nsl library prevents programs from opening the X display
    # on Irix 5.2, according to dickey@clark.net.
    echo $ac_n "checking for gethostbyname""... $ac_c" 1>&6
echo "configure:8521: checking for gethostbyname" >&5
if eval "test \"`echo '$''{'ac_cv_func_gethostbyname'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 8526 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char gethostbyname(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char gethostbyname();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_gethostbyname) || defined (__stub___gethostbyname)
choke me
#else
gethostbyname();
#endif

; return 0; }
EOF
if { (eval echo configure:8549: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_gethostbyname=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_gethostbyname=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'gethostbyname`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  :
else
  echo "$ac_t""no" 1>&6
fi

    if test $ac_cv_func_gethostbyname = no; then
      echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6
echo "configure:8570: checking for gethostbyname in -lnsl" >&5
ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lnsl  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 8578 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char gethostbyname();

int main() {
gethostbyname()
; return 0; }
EOF
if { (eval echo configure:8589: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl"
else
  echo "$ac_t""no" 1>&6
fi

    fi

    # lieder@skyler.mavd.honeywell.com says without -lsocket,
    # socket/setsockopt and other routines are undefined under SCO ODT
    # 2.0.  But -lsocket is broken on IRIX 5.2 (and is not necessary
    # on later versions), says simon@lia.di.epfl.ch: it contains
    # gethostby* variants that don't use the nameserver (or something).
    # -lsocket must be given before -lnsl if both are needed.
    # We assume that if connect needs -lnsl, so does gethostbyname.
    echo $ac_n "checking for connect""... $ac_c" 1>&6
echo "configure:8619: checking for connect" >&5
if eval "test \"`echo '$''{'ac_cv_func_connect'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 8624 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char connect(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char connect();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_connect) || defined (__stub___connect)
choke me
#else
connect();
#endif

; return 0; }
EOF
if { (eval echo configure:8647: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_connect=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_connect=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'connect`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  :
else
  echo "$ac_t""no" 1>&6
fi

    if test $ac_cv_func_connect = no; then
      echo $ac_n "checking for connect in -lsocket""... $ac_c" 1>&6
echo "configure:8668: checking for connect in -lsocket" >&5
ac_lib_var=`echo socket'_'connect | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lsocket $X_EXTRA_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
#line 8676 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char connect();

int main() {
connect()
; return 0; }
EOF
if { (eval echo configure:8687: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS"
else
  echo "$ac_t""no" 1>&6
fi

    fi

    # gomez@mi.uni-erlangen.de says -lposix is necessary on A/UX.
    echo $ac_n "checking for remove""... $ac_c" 1>&6
echo "configure:8711: checking for remove" >&5
if eval "test \"`echo '$''{'ac_cv_func_remove'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 8716 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char remove(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char remove();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_remove) || defined (__stub___remove)
choke me
#else
remove();
#endif

; return 0; }
EOF
if { (eval echo configure:8739: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_remove=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_remove=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'remove`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  :
else
  echo "$ac_t""no" 1>&6
fi

    if test $ac_cv_func_remove = no; then
      echo $ac_n "checking for remove in -lposix""... $ac_c" 1>&6
echo "configure:8760: checking for remove in -lposix" >&5
ac_lib_var=`echo posix'_'remove | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lposix  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 8768 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char remove();

int main() {
remove()
; return 0; }
EOF
if { (eval echo configure:8779: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix"
else
  echo "$ac_t""no" 1>&6
fi

    fi

    # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay.
    echo $ac_n "checking for shmat""... $ac_c" 1>&6
echo "configure:8803: checking for shmat" >&5
if eval "test \"`echo '$''{'ac_cv_func_shmat'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 8808 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char shmat(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char shmat();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_shmat) || defined (__stub___shmat)
choke me
#else
shmat();
#endif

; return 0; }
EOF
if { (eval echo configure:8831: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_shmat=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_shmat=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'shmat`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  :
else
  echo "$ac_t""no" 1>&6
fi

    if test $ac_cv_func_shmat = no; then
      echo $ac_n "checking for shmat in -lipc""... $ac_c" 1>&6
echo "configure:8852: checking for shmat in -lipc" >&5
ac_lib_var=`echo ipc'_'shmat | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lipc  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 8860 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char shmat();

int main() {
shmat()
; return 0; }
EOF
if { (eval echo configure:8871: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc"
else
  echo "$ac_t""no" 1>&6
fi

    fi
  fi

  # Check for libraries that X11R6 Xt/Xaw programs need.
  ac_save_LDFLAGS="$LDFLAGS"
  test -n "$x_libraries" && LDFLAGS="$LDFLAGS -L$x_libraries"
  # SM needs ICE to (dynamically) link under SunOS 4.x (so we have to
  # check for ICE first), but we must link in the order -lSM -lICE or
  # we get undefined symbols.  So assume we have SM if we have ICE.
  # These have to be linked with before -lX11, unlike the other
  # libraries we check for below, so use a different variable.
  #  --interran@uluru.Stanford.EDU, kb@cs.umb.edu.
  echo $ac_n "checking for IceConnectionNumber in -lICE""... $ac_c" 1>&6
echo "configure:8904: checking for IceConnectionNumber in -lICE" >&5
ac_lib_var=`echo ICE'_'IceConnectionNumber | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lICE $X_EXTRA_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
#line 8912 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char IceConnectionNumber();

int main() {
IceConnectionNumber()
; return 0; }
EOF
if { (eval echo configure:8923: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE"
else
  echo "$ac_t""no" 1>&6
fi

  LDFLAGS="$ac_save_LDFLAGS"

fi

CPPFLAGS="$CPPFLAGS $X_CFLAGS"
LDFLAGS="$LDFLAGS $X_LIBS"

if test "$wxUSE_MOTIF" = 1; then
    if test "$no_x" = "yes"; then
      { echo "configure: error: X11 not found" 1>&2; exit 1; }
    fi

    GUI_TK_LIBRARY="$X_LIBS"
    TOOLKIT_INCLUDE="$X_CFLAGS"

    AFMINSTALL=afminstall

                                                                                                
    COMPILED_X_PROGRAM=0

    echo $ac_n "checking for Motif/Lesstif headers""... $ac_c" 1>&6
echo "configure:8964: checking for Motif/Lesstif headers" >&5
    
ac_find_includes=
for ac_dir in $SEARCH_INCLUDE;
  do
    if test -f "$ac_dir/Xm/Xm.h"; then
      ac_find_includes=$ac_dir
      break
    fi
  done

    if test "$ac_find_includes" != "" ; then
        echo "$ac_t""found $ac_find_includes" 1>&6
    else
        cat > conftest.$ac_ext <<EOF
#line 8979 "configure"
#include "confdefs.h"

                #include <Xm/Xm.h>
            
int main() {

                int version;

                version = xmUseVersion;
            
; return 0; }
EOF
if { (eval echo configure:8992: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  
                echo "$ac_t""found in default search path" 1>&6
                COMPILED_X_PROGRAM=1
            
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  
                echo "$ac_t""no" 1>&6
                { echo "configure: error: please set CFLAGS to contain the location of Xm/Xm.h" 1>&2; exit 1; }
            
        
fi
rm -f conftest*
    fi

    if test "$COMPILED_X_PROGRAM" = 0; then
        echo $ac_n "checking for Motif/Lesstif library""... $ac_c" 1>&6
echo "configure:9013: checking for Motif/Lesstif library" >&5
        
ac_find_libraries=
for ac_dir in $SEARCH_LIB;
  do
    for ac_extension in a so sl; do
      if test -f "$ac_dir/libXm.$ac_extension"; then
        ac_find_libraries=$ac_dir
        break 2
      fi
    done
  done

        if test "$ac_find_libraries" != "" ; then
            
  ac_path_to_include=$ac_find_includes
  echo "$TOOLKIT_INCLUDE" | grep "\-I$ac_find_includes" > /dev/null
  result=$?
  if test $result = 0; then
    ac_path_to_include=""
  else
    ac_path_to_include="-I$ac_find_includes"
  fi

            
  echo "$GUI_TK_LIBRARY" | grep "\-L$ac_find_libraries" > /dev/null
  result=$?
  if test $result = 0; then
    ac_path_to_link=""
  else
    ac_path_to_link="-L$ac_find_libraries"
  fi


            GUI_TK_LIBRARY="$GUI_TK_LIBRARY $ac_path_to_link"
            TOOLKIT_INCLUDE="$TOOLKIT_INCLUDE $ac_path_to_include"
            echo "$ac_t""found at $ac_find_libraries" 1>&6
        else
                                                cat > conftest.$ac_ext <<EOF
#line 9052 "configure"
#include "confdefs.h"

                    #include <Xm/Xm.h>
                
int main() {

                    int version;

                    version = xmUseVersion;
                
; return 0; }
EOF
if { (eval echo configure:9065: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  
                    echo "$ac_t""found in default search path" 1>&6
                    COMPILED_X_PROGRAM=1
                
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  
                    echo "$ac_t""no" 1>&6
                    { echo "configure: error: please set LDFLAGS to contain the location of libXm" 1>&2; exit 1; }
                
            
fi
rm -f conftest*
        fi
    fi

                                                                                                                            
    XPM_LINK=""
    echo $ac_n "checking for Xpm library""... $ac_c" 1>&6
echo "configure:9088: checking for Xpm library" >&5
    
ac_find_libraries=
for ac_dir in $SEARCH_LIB;
  do
    for ac_extension in a so sl; do
      if test -f "$ac_dir/libXpm.$ac_extension"; then
        ac_find_libraries=$ac_dir
        break 2
      fi
    done
  done

    if test "$ac_find_libraries" != "" ; then
        
  echo "$GUI_TK_LIBRARY" | grep "\-L$ac_find_libraries" > /dev/null
  result=$?
  if test $result = 0; then
    ac_path_to_link=""
  else
    ac_path_to_link="-L$ac_find_libraries"
  fi

        GUI_TK_LIBRARY="$GUI_TK_LIBRARY $ac_path_to_link"
        XPM_LINK="-lXpm "
        cat >> confdefs.h <<\EOF
#define wxHAVE_LIB_XPM 1
EOF

        echo "$ac_t""found at $ac_find_libraries" 1>&6
    else
        cat > conftest.$ac_ext <<EOF
#line 9120 "configure"
#include "confdefs.h"

                #include <X11/xpm.h>
            
int main() {

                int version;

                version = XpmLibraryVersion();
            
; return 0; }
EOF
if { (eval echo configure:9133: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  
            XPM_LINK="-lXpm "
            cat >> confdefs.h <<\EOF
#define wxHAVE_LIB_XPM 1
EOF

                echo "$ac_t""found in default search path" 1>&6
                COMPILED_X_PROGRAM=0
            
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  
                echo "$ac_t""no" 1>&6
                echo "configure: warning: library will be compiled without support for images in XPM format" 1>&2
            
        
fi
rm -f conftest*
    fi

    GUI_TK_LINK="-lXm $XPM_LINK -lXmu -lXext -lXt -lX11"
    GUI_TK_LIBRARY="$GUI_TK_LIBRARY $GUI_TK_LINK"
    TOOLKIT=MOTIF
    GUIDIST=MOTIF_DIST
fi

if test "$wxUSE_MAC" = 1; then
    TOOLKIT=MAC
        GUIDIST=MACX_DIST
fi

if test "$wxUSE_PM" = 1; then
    TOOLKIT=PM
    GUIDIST=GTK_DIST
fi

if test "$TOOLKIT" != "PM" ; then
    TOOLKIT_DIR=`echo ${TOOLKIT} | tr "[A-Z]" "[a-z]"`
else
    TOOLKIT_DIR="os2"
fi

        if test "$wxUSE_DEBUG_FLAG" = "yes"; then
        TOOLKIT_NAME="${TOOLKIT_DIR}d"
    else
        TOOLKIT_NAME="${TOOLKIT_DIR}"
    fi

        TOOLKIT_DEF="-D__WX${TOOLKIT}__"

        WX_LIBRARY="wx_${TOOLKIT_NAME}"

        ALL_OBJECTS="\$(GUIOBJS) \$(COMMONOBJS) \$(GENERICOBJS) \$(UNIXOBJS) \$(HTMLOBJS) \$(OGLOBJS)"

        if test "$TOOLKIT" != "MSW" -a "$wxUSE_ODBC" = "yes" ; then
        ALL_OBJECTS="${ALL_OBJECTS} \$(IODBCOBJS)"
    fi

    if test "$wxUSE_LIBJPEG" = "yes" ; then
        ALL_OBJECTS="${ALL_OBJECTS} \$(JPEGOBJS)"
    fi
    if test "$wxUSE_LIBTIFF" = "yes" ; then
        ALL_OBJECTS="${ALL_OBJECTS} \$(TIFFOBJS)"
    fi
    if test "$wxUSE_LIBPNG" = "yes" ; then
        ALL_OBJECTS="${ALL_OBJECTS} \$(PNGOBJS)"
    fi
    if test "$wxUSE_ZLIB" = "yes" ; then
        ALL_OBJECTS="${ALL_OBJECTS} \$(ZLIBOBJS)"
    fi
    if test "$wxUSE_FREETYPE" = "yes" ; then
        ALL_OBJECTS="${ALL_OBJECTS} \$(FREETYPEOBJS)"
    fi
    ALL_DEPFILES="\$(GUIDEPS) \$(COMMONDEPS) \$(GENERICDEPS) \$(UNIXDEPS) \$(HTMLDEPS) \$(OGLDEPS)"

    PORT_FILES="src/\$(TOOLKITDIR)/files.lst"
    RPM_FILES="src/\$(TOOLKITDIR)/rpmfiles.lst"
    RPM_SPEC="wx\$(TOOLKIT).spec"

        GUIDIST="${GUIDIST} SAMPLES_DIST DEMOS_DIST UTILS_DIST MISC_DIST"
    DISTDIR="wx\$(TOOLKIT)"
else
    USE_GUI=0

        TOOLKIT_DIR="base"

        if test "$wxUSE_DEBUG_FLAG" = "yes"; then
        TOOLKIT_NAME="${TOOLKIT_DIR}d"
    else
        TOOLKIT_NAME="${TOOLKIT_DIR}"
    fi

    TOOLKIT_DEF="-D__WXBASE__"

        ALL_OBJECTS="\$(BASE_OBJS) \$(BASE_UNIX_OBJS)"
    ALL_DEPFILES="\$(BASE_DEPS) \$(BASE_UNIX_DEPS)"

    if test "$wxUSE_ZLIB" = "yes" ; then
        ALL_OBJECTS="${ALL_OBJECTS} \$(ZLIBOBJS)"
    fi

        WX_LIBRARY="wx_${TOOLKIT_NAME}"

    PORT_FILES="src/files.lst"
    RPM_FILES="src/rpmfiles.lst"
    RPM_SPEC="wxBase.spec"

        GUIDIST="BASE_DIST"
    DISTDIR="wxBase"
fi

WX_LIBRARY_NAME="lib${WX_LIBRARY}.la"
WX_LIBRARY_NAME_GL="lib${WX_LIBRARY}_gl.la"

WX_LIBRARY_NAME_STATIC="lib${WX_LIBRARY}.a"
WX_LIBRARY_NAME_STATIC_GL="lib${WX_LIBRARY}_gl.a"

WX_LIBRARY_NAME_SHARED="lib${WX_LIBRARY}-${WX_RELEASE}.so.${WX_CURRENT}.${WX_REVISION}.${WX_AGE}"
WX_LIBRARY_NAME_SHARED_GL="lib${WX_LIBRARY}_gl-${WX_RELEASE}.so.${WX_CURRENT}.${WX_REVISION}.${WX_AGE}"

WX_LIBRARY_LINK1="lib${WX_LIBRARY}-${WX_RELEASE}.so.${WX_CURRENT}"
WX_LIBRARY_LINK2="lib${WX_LIBRARY}-${WX_RELEASE}.so"
WX_LIBRARY_LINK3="lib${WX_LIBRARY}.so"
WX_LIBRARY_LINK1_GL="lib${WX_LIBRARY}_gl-${WX_RELEASE}.so.${WX_CURRENT}"
WX_LIBRARY_LINK2_GL="lib${WX_LIBRARY}_gl-${WX_RELEASE}.so"
WX_LIBRARY_LINK3_GL="lib${WX_LIBRARY}_gl.so"

SHARED_LD=
PIC_FLAG=
WX_ALL=
WX_ALL_INSTALLED=
BURNT_LIBRARY_NAME=
WX_TARGET_LIBRARY_SONAME=


if test "$wxUSE_SHARED" = "yes"; then
    case "${host}" in
      *-hp-hpux* )
        if test "$GCC" = yes ; then
            SHARED_LD="${CC} -shared -fPIC -o"
            PIC_FLAG="-fPIC"
        else
                        LDFLAGS="-L/usr/lib"

            SHARED_LD="${CXX} -b -o"
            PIC_FLAG="+Z"
        fi
        WX_LIBRARY_NAME_SHARED="libwx_${TOOLKIT_NAME}.sl"
        WX_LIBRARY_NAME_SHARED_GL="libwx_${TOOLKIT_NAME}_gl.sl"
        if test "$wxUSE_OPENGL" = "yes"; then
            WX_ALL_INSTALLED="preinstall_gl"
            WX_ALL="${WX_LIBRARY_NAME_SHARED} ${WX_LIBRARY_NAME_SHARED_GL}"
        else
            WX_ALL="${WX_LIBRARY_NAME_SHARED}"
        fi
      ;;

            *-*-linux* )
        SHARED_LD="${CC} -shared -o"
        PIC_FLAG="-fPIC"
        if test "$wxUSE_BURNT_NAME" = "yes" ; then
            BURNT_LIBRARY_NAME="-Wl,-soname,${WX_LIBRARY_LINK1}"
            BURNT_LIBRARY_NAME_GL="-Wl,-soname,${WX_LIBRARY_LINK1_GL}"
                        WX_TARGET_LIBRARY_SONAME="-Wl,-soname,\$(TARGETLIB_LINK1)"
        fi
        if test "$wxUSE_OPENGL" = "yes"; then
            WX_ALL_INSTALLED="CREATE_INSTALLED_LINKS CREATE_INSTALLED_LINKS_GL"
            WX_ALL="CREATE_LINKS CREATE_LINKS_GL"
        else
            WX_ALL_INSTALLED="CREATE_INSTALLED_LINKS"
            WX_ALL="CREATE_LINKS"
        fi
      ;;
      *-*-irix5* | *-*-irix6* )
        if test "$GCC" = yes ; then
           SHARED_LD="${CC} -shared -o"
           PIC_FLAG="-fPIC"
        else
           SHARED_LD="${CXX} -shared -o"
        fi
        if test "$wxUSE_OPENGL" = "yes"; then
            WX_ALL_INSTALLED="CREATE_INSTALLED_LINKS CREATE_INSTALLED_LINKS_GL"
            WX_ALL="CREATE_LINKS CREATE_LINKS_GL"
        else
            WX_ALL_INSTALLED="CREATE_INSTALLED_LINKS"
            WX_ALL="CREATE_LINKS"
        fi
      ;;
      *-*-solaris2* )
        if test "$GCC" = yes ; then
            SHARED_LD="${CC} -shared -o"
            PIC_FLAG="-fPIC"

                                    CPPFLAGS="$CPPFLAGS -isystem /usr/openwin/include"
        else
            SHARED_LD="${CXX} -G -o"
            PIC_FLAG="-KPIC"
        fi
        if test "$wxUSE_OPENGL" = "yes"; then
            WX_ALL_INSTALLED="CREATE_INSTALLED_LINKS CREATE_INSTALLED_LINKS_GL"
            WX_ALL="CREATE_LINKS CREATE_LINKS_GL"
        else
            WX_ALL_INSTALLED="CREATE_INSTALLED_LINKS"
            WX_ALL="CREATE_LINKS"
        fi
      ;;
      *-*-sunos4* )
        SHARED_LD="${CC} -shared -o"
        PIC_FLAG="-fPIC"
        WX_ALL_INSTALLED="CREATE_INSTALLED_LINKS"
        WX_ALL="CREATE_LINKS"
      ;;
      *-*-freebsd* | *-*-openbsd* | *-*-netbsd* )
        SHARED_LD="${CC} -shared -o"
        PIC_FLAG="-fPIC"
        if test "$wxUSE_OPENGL" = "yes"; then
            WX_ALL_INSTALLED="CREATE_INSTALLED_LINKS CREATE_INSTALLED_LINKS_GL"
            WX_ALL="CREATE_LINKS CREATE_LINKS_GL"
        else
            WX_ALL_INSTALLED="CREATE_INSTALLED_LINKS"
            WX_ALL="CREATE_LINKS"
        fi
      ;;
      *-*-darwin* )
        SHARED_LD="${CXX} -dynamiclib -o"
        PIC_FLAG="-dynamic -fPIC"
        if test "$wxUSE_OPENGL" = "yes"; then
            WX_ALL_INSTALLED="CREATE_INSTALLED_LINKS CREATE_INSTALLED_LINKS_GL"
            WX_ALL="CREATE_LINKS CREATE_LINKS_GL"
        else
            WX_ALL_INSTALLED="CREATE_INSTALLED_LINKS"
            WX_ALL="CREATE_LINKS"
        fi
		WX_ALL="${WX_ALL} ./lib/lib${WX_LIBRARY}-${WX_RELEASE}.${WX_CURRENT}.r"
		WX_LIBRARY_NAME_SHARED="lib${WX_LIBRARY}-${WX_RELEASE}.${WX_CURRENT}.${WX_REVISION}.${WX_AGE}.dylib"
	WX_LIBRARY_NAME_SHARED_GL="lib${WX_LIBRARY}_gl-${WX_RELEASE}.${WX_CURRENT}.${WX_REVISION}.${WX_AGE}.dylib"
		WX_LIBRARY_LINK1="lib${WX_LIBRARY}-${WX_RELEASE}.${WX_CURRENT}.dylib"
	WX_LIBRARY_LINK2="lib${WX_LIBRARY}-${WX_RELEASE}.dylib"
	WX_LIBRARY_LINK3="lib${WX_LIBRARY}.dylib"
	WX_LIBRARY_LINK1_GL="lib${WX_LIBRARY}_gl-${WX_RELEASE}.${WX_CURRENT}.dylib"
	WX_LIBRARY_LINK2_GL="lib${WX_LIBRARY}_gl-${WX_RELEASE}.dylib"
	WX_LIBRARY_LINK3_GL="lib${WX_LIBRARY}_gl.dylib"
      ;;
      *-*-osf* )
        SHARED_LD="${CXX} -shared -o"
        PIC_FLAG="-fPIC"
        WX_ALL_INSTALLED="CREATE_INSTALLED_LINKS"
        WX_ALL="CREATE_LINKS"
      ;;
      *-*-dgux5* )
        SHARED_LD="${CXX} -shared -o"
        PIC_FLAG="-fPIC"
        WX_ALL_INSTALLED="CREATE_INSTALLED_LINKS"
        WX_ALL="CREATE_LINKS"
      ;;
      *-*-sysv5* )
        SHARED_LD="${CC} -shared -o"
        PIC_FLAG="-fPIC"
        WX_ALL_INSTALLED="CREATE_INSTALLED_LINKS"
        WX_ALL="CREATE_LINKS"
      ;;
      *-*-aix* )
        SHARED_LD="/usr/lpp/xlC/bin/makeC++SharedLib -p 0 -o"
        WX_ALL=${WX_LIBRARY_NAME_SHARED}
      ;;
      *-*-cygwin* )
                WX_TARGET_LIBRARY="${WX_LIBRARY_NAME_STATIC}"
        WX_TARGET_LIBRARY_GL="${WX_LIBRARY_NAME_STATIC_GL}"
        if test "$wxUSE_OPENGL" = "yes"; then
            WX_ALL_INSTALLED="preinstall_gl"
            WX_ALL="${WX_LIBRARY_NAME_STATIC} ${WX_LIBRARY_NAME_STATIC_GL}"
        else
            WX_ALL="${WX_LIBRARY_NAME_STATIC}"
        fi
      ;;
      *-*-mingw32* )
                WX_TARGET_LIBRARY="${WX_LIBRARY_NAME_STATIC}"
        WX_TARGET_LIBRARY_GL="${WX_LIBRARY_NAME_STATIC_GL}"
        if test "$wxUSE_OPENGL" = "yes"; then
            WX_ALL_INSTALLED="preinstall_gl"
            WX_ALL="${WX_LIBRARY_NAME_STATIC} ${WX_LIBRARY_NAME_STATIC_GL}"
        else
            WX_ALL="${WX_LIBRARY_NAME_STATIC}"
        fi
      ;;
      *-pc-os2_emx )
                WX_TARGET_LIBRARY="${WX_LIBRARY_NAME_STATIC}"
        WX_ALL="${WX_LIBRARY_NAME_STATIC}"
      ;;
      *-*-beos* )
                        SHARED_LD="${LD} -shared -o"
        PIC_FLAG="-fPIC"
        WX_ALL_INSTALLED="CREATE_INSTALLED_LINKS"
        WX_ALL="CREATE_LINKS"
      ;;
      *)
        { echo "configure: error: unknown system type ${host}." 1>&2; exit 1; }
    esac

        if test "x$WX_TARGET_LIBRARY" = "x"; then
        WX_TARGET_LIBRARY="${WX_LIBRARY_NAME_SHARED}"
        WX_TARGET_LIBRARY_GL="${WX_LIBRARY_NAME_SHARED_GL}"
    fi
        WX_TARGET_LIBRARY_TYPE="so"
else
        WX_TARGET_LIBRARY="${WX_LIBRARY_NAME_STATIC}"
    WX_TARGET_LIBRARY_GL="${WX_LIBRARY_NAME_STATIC_GL}"

    if test "$wxUSE_OPENGL" = "yes"; then
        WX_ALL_INSTALLED="preinstall_gl"
        WX_ALL="${WX_LIBRARY_NAME_STATIC} ${WX_LIBRARY_NAME_STATIC_GL}"
    else
        WX_ALL="${WX_LIBRARY_NAME_STATIC}"
    fi

        if test "$wxUSE_GUI" = "no"; then
                WX_ALL_INSTALLED="${WX_ALL_INSTALLED} preinstall"
    fi

    WX_TARGET_LIBRARY_TYPE="a"
fi


for ac_hdr in strings.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:9464: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 9469 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:9474: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done

for ac_hdr in unistd.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:9504: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 9509 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:9514: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done

for ac_hdr in wchar.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:9544: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 9549 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:9554: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done

for ac_hdr in wcstr.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:9584: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 9589 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:9594: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done

for ac_hdr in fnmatch.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:9624: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 9629 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:9634: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done

for ac_hdr in iconv.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:9664: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 9669 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:9674: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done

for ac_hdr in langinfo.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:9704: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 9709 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:9714: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done


if test "$wxUSE_GUI" = "yes"; then
    if test "$wxUSE_UNIX" = "yes"; then
                for ac_hdr in X11/XKBlib.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:9747: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 9752 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:9757: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done

    fi
fi


echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
echo "configure:9788: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 9793 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <string.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:9801: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  ac_cv_header_stdc=yes
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_header_stdc=no
fi
rm -f conftest*

if test $ac_cv_header_stdc = yes; then
  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
#line 9818 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  egrep "memchr" >/dev/null 2>&1; then
  :
else
  rm -rf conftest*
  ac_cv_header_stdc=no
fi
rm -f conftest*

fi

if test $ac_cv_header_stdc = yes; then
  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
#line 9836 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  egrep "free" >/dev/null 2>&1; then
  :
else
  rm -rf conftest*
  ac_cv_header_stdc=no
fi
rm -f conftest*

fi

if test $ac_cv_header_stdc = yes; then
  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
if test "$cross_compiling" = yes; then
  :
else
  cat > conftest.$ac_ext <<EOF
#line 9857 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
int main () { int i; for (i = 0; i < 256; i++)
if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
exit (0); }

EOF
if { (eval echo configure:9868: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  :
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_header_stdc=no
fi
rm -fr conftest*
fi

fi
fi

echo "$ac_t""$ac_cv_header_stdc" 1>&6
if test $ac_cv_header_stdc = yes; then
  cat >> confdefs.h <<\EOF
#define STDC_HEADERS 1
EOF

fi

echo $ac_n "checking for mode_t""... $ac_c" 1>&6
echo "configure:9892: checking for mode_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_mode_t'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 9897 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
#include <stdlib.h>
#include <stddef.h>
#endif
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  egrep "(^|[^a-zA-Z_0-9])mode_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
  rm -rf conftest*
  ac_cv_type_mode_t=yes
else
  rm -rf conftest*
  ac_cv_type_mode_t=no
fi
rm -f conftest*

fi
echo "$ac_t""$ac_cv_type_mode_t" 1>&6
if test $ac_cv_type_mode_t = no; then
  cat >> confdefs.h <<\EOF
#define mode_t int
EOF

fi

echo $ac_n "checking for off_t""... $ac_c" 1>&6
echo "configure:9925: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 9930 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
#include <stdlib.h>
#include <stddef.h>
#endif
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  egrep "(^|[^a-zA-Z_0-9])off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
  rm -rf conftest*
  ac_cv_type_off_t=yes
else
  rm -rf conftest*
  ac_cv_type_off_t=no
fi
rm -f conftest*

fi
echo "$ac_t""$ac_cv_type_off_t" 1>&6
if test $ac_cv_type_off_t = no; then
  cat >> confdefs.h <<\EOF
#define off_t long
EOF

fi

echo $ac_n "checking for pid_t""... $ac_c" 1>&6
echo "configure:9958: checking for pid_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 9963 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
#include <stdlib.h>
#include <stddef.h>
#endif
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  egrep "(^|[^a-zA-Z_0-9])pid_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
  rm -rf conftest*
  ac_cv_type_pid_t=yes
else
  rm -rf conftest*
  ac_cv_type_pid_t=no
fi
rm -f conftest*

fi
echo "$ac_t""$ac_cv_type_pid_t" 1>&6
if test $ac_cv_type_pid_t = no; then
  cat >> confdefs.h <<\EOF
#define pid_t int
EOF

fi

echo $ac_n "checking for size_t""... $ac_c" 1>&6
echo "configure:9991: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 9996 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
#include <stdlib.h>
#include <stddef.h>
#endif
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
  rm -rf conftest*
  ac_cv_type_size_t=yes
else
  rm -rf conftest*
  ac_cv_type_size_t=no
fi
rm -f conftest*

fi
echo "$ac_t""$ac_cv_type_size_t" 1>&6
if test $ac_cv_type_size_t = no; then
  cat >> confdefs.h <<\EOF
#define size_t unsigned
EOF

fi

echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6
echo "configure:10024: checking for uid_t in sys/types.h" >&5
if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 10029 "configure"
#include "confdefs.h"
#include <sys/types.h>
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  egrep "uid_t" >/dev/null 2>&1; then
  rm -rf conftest*
  ac_cv_type_uid_t=yes
else
  rm -rf conftest*
  ac_cv_type_uid_t=no
fi
rm -f conftest*

fi

echo "$ac_t""$ac_cv_type_uid_t" 1>&6
if test $ac_cv_type_uid_t = no; then
  cat >> confdefs.h <<\EOF
#define uid_t int
EOF

  cat >> confdefs.h <<\EOF
#define gid_t int
EOF

fi


echo $ac_n "checking for wchar_t""... $ac_c" 1>&6
echo "configure:10059: checking for wchar_t" >&5
if eval "test \"`echo '$''{'wx_cv_type_wchar_t'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
    cat > conftest.$ac_ext <<EOF
#line 10065 "configure"
#include "confdefs.h"
#include <wchar.h>
int main() {

	    wchar_t wc, *ws;
	    wc = L'a';
	    ws = L"Hello, world!";
        
; return 0; }
EOF
if { (eval echo configure:10076: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  wx_cv_type_wchar_t=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  wx_cv_type_wchar_t=no
fi
rm -f conftest*

fi

echo "$ac_t""$wx_cv_type_wchar_t" 1>&6
if test "$wx_cv_type_wchar_t" = yes ; then
    cat >> confdefs.h <<\EOF
#define wxUSE_WCHAR_T 1
EOF

fi


echo $ac_n "checking for pw_gecos in struct passwd""... $ac_c" 1>&6
echo "configure:10099: checking for pw_gecos in struct passwd" >&5
if eval "test \"`echo '$''{'wx_cv_struct_pw_gecos'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
        cat > conftest.$ac_ext <<EOF
#line 10105 "configure"
#include "confdefs.h"
#include <pwd.h>
int main() {

                char *p;
                struct passwd *pw;
                p = pw->pw_gecos;
             
; return 0; }
EOF
if { (eval echo configure:10116: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  
                wx_cv_struct_pw_gecos=yes
             
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  
                wx_cv_struct_pw_gecos=no
             
        
fi
rm -f conftest*
    

fi

echo "$ac_t""$wx_cv_struct_pw_gecos" 1>&6

if test "$wx_cv_struct_pw_gecos" = "yes"; then
    cat >> confdefs.h <<\EOF
#define HAVE_PW_GECOS 1
EOF

fi


echo $ac_n "checking for working const""... $ac_c" 1>&6
echo "configure:10146: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 10151 "configure"
#include "confdefs.h"

int main() {

/* Ultrix mips cc rejects this.  */
typedef int charset[2]; const charset x;
/* SunOS 4.1.1 cc rejects this.  */
char const *const *ccp;
char **p;
/* NEC SVR4.0.2 mips cc rejects this.  */
struct point {int x, y;};
static struct point const zero = {0,0};
/* AIX XL C 1.02.0.0 rejects this.
   It does not let you subtract one const X* pointer from another in an arm
   of an if-expression whose if-part is not a constant expression */
const char *g = "string";
ccp = &g + (g ? g-g : 0);
/* HPUX 7.0 cc rejects these. */
++ccp;
p = (char**) ccp;
ccp = (char const *const *) p;
{ /* SCO 3.2v4 cc rejects this.  */
  char *t;
  char const *s = 0 ? (char *) 0 : (char const *) 0;

  *t++ = 0;
}
{ /* Someone thinks the Sun supposedly-ANSI compiler will reject this.  */
  int x[] = {25, 17};
  const int *foo = &x[0];
  ++foo;
}
{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
  typedef const int *iptr;
  iptr p = 0;
  ++p;
}
{ /* AIX XL C 1.02.0.0 rejects this saying
     "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
  struct s { int j; const int *ap[3]; };
  struct s *b; b->j = 5;
}
{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
  const int foo = 10;
}

; return 0; }
EOF
if { (eval echo configure:10200: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  ac_cv_c_const=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_c_const=no
fi
rm -f conftest*
fi

echo "$ac_t""$ac_cv_c_const" 1>&6
if test $ac_cv_c_const = no; then
  cat >> confdefs.h <<\EOF
#define const 
EOF

fi

echo $ac_n "checking for inline""... $ac_c" 1>&6
echo "configure:10221: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
  cat > conftest.$ac_ext <<EOF
#line 10228 "configure"
#include "confdefs.h"

int main() {
} $ac_kw foo() {
; return 0; }
EOF
if { (eval echo configure:10235: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  ac_cv_c_inline=$ac_kw; break
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*
done

fi

echo "$ac_t""$ac_cv_c_inline" 1>&6
case "$ac_cv_c_inline" in
  inline | yes) ;;
  no) cat >> confdefs.h <<\EOF
#define inline 
EOF
 ;;
  *)  cat >> confdefs.h <<EOF
#define inline $ac_cv_c_inline
EOF
 ;;
esac


echo $ac_n "checking size of char""... $ac_c" 1>&6
echo "configure:10262: checking size of char" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_char'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
  ac_cv_sizeof_char=1
else
  cat > conftest.$ac_ext <<EOF
#line 10270 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
{
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  fprintf(f, "%d\n", sizeof(char));
  exit(0);
}
EOF
if { (eval echo configure:10281: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_sizeof_char=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_sizeof_char=0
fi
rm -fr conftest*
fi

fi
echo "$ac_t""$ac_cv_sizeof_char" 1>&6
cat >> confdefs.h <<EOF
#define SIZEOF_CHAR $ac_cv_sizeof_char
EOF


echo $ac_n "checking size of short""... $ac_c" 1>&6
echo "configure:10301: checking size of short" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_short'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
  ac_cv_sizeof_short=2
else
  cat > conftest.$ac_ext <<EOF
#line 10309 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
{
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  fprintf(f, "%d\n", sizeof(short));
  exit(0);
}
EOF
if { (eval echo configure:10320: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_sizeof_short=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_sizeof_short=0
fi
rm -fr conftest*
fi

fi
echo "$ac_t""$ac_cv_sizeof_short" 1>&6
cat >> confdefs.h <<EOF
#define SIZEOF_SHORT $ac_cv_sizeof_short
EOF


echo $ac_n "checking size of int *""... $ac_c" 1>&6
echo "configure:10340: checking size of int *" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_int_p'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
  ac_cv_sizeof_int_p=4
else
  cat > conftest.$ac_ext <<EOF
#line 10348 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
{
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  fprintf(f, "%d\n", sizeof(int *));
  exit(0);
}
EOF
if { (eval echo configure:10359: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_sizeof_int_p=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_sizeof_int_p=0
fi
rm -fr conftest*
fi

fi
echo "$ac_t""$ac_cv_sizeof_int_p" 1>&6
cat >> confdefs.h <<EOF
#define SIZEOF_INT_P $ac_cv_sizeof_int_p
EOF


echo $ac_n "checking size of int""... $ac_c" 1>&6
echo "configure:10379: checking size of int" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_int'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
  ac_cv_sizeof_int=4
else
  cat > conftest.$ac_ext <<EOF
#line 10387 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
{
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  fprintf(f, "%d\n", sizeof(int));
  exit(0);
}
EOF
if { (eval echo configure:10398: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_sizeof_int=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_sizeof_int=0
fi
rm -fr conftest*
fi

fi
echo "$ac_t""$ac_cv_sizeof_int" 1>&6
cat >> confdefs.h <<EOF
#define SIZEOF_INT $ac_cv_sizeof_int
EOF


echo $ac_n "checking size of long""... $ac_c" 1>&6
echo "configure:10418: checking size of long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
  ac_cv_sizeof_long=4
else
  cat > conftest.$ac_ext <<EOF
#line 10426 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
{
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  fprintf(f, "%d\n", sizeof(long));
  exit(0);
}
EOF
if { (eval echo configure:10437: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_sizeof_long=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_sizeof_long=0
fi
rm -fr conftest*
fi

fi
echo "$ac_t""$ac_cv_sizeof_long" 1>&6
cat >> confdefs.h <<EOF
#define SIZEOF_LONG $ac_cv_sizeof_long
EOF


echo $ac_n "checking size of long long""... $ac_c" 1>&6
echo "configure:10457: checking size of long long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long_long'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
  ac_cv_sizeof_long_long=0
else
  cat > conftest.$ac_ext <<EOF
#line 10465 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
{
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  fprintf(f, "%d\n", sizeof(long long));
  exit(0);
}
EOF
if { (eval echo configure:10476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_sizeof_long_long=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_sizeof_long_long=0
fi
rm -fr conftest*
fi

fi
echo "$ac_t""$ac_cv_sizeof_long_long" 1>&6
cat >> confdefs.h <<EOF
#define SIZEOF_LONG_LONG $ac_cv_sizeof_long_long
EOF



echo $ac_n "checking size of wchar_t""... $ac_c" 1>&6
echo "configure:10497: checking size of wchar_t" >&5
if eval "test \"`echo '$''{'wx_cv_sizeof_wchar_t'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
    if test "$cross_compiling" = yes; then
  wx_cv_sizeof_wchar_t=4
	
else
  cat > conftest.$ac_ext <<EOF
#line 10507 "configure"
#include "confdefs.h"

	    #include <wchar.h>
	    #include <stdio.h>
	    int main()
	    {
            FILE *f=fopen("conftestval", "w");
            if (!f) exit(1);
	    fprintf(f, "%i", sizeof(wchar_t));
	    exit(0);
	    }
        
EOF
if { (eval echo configure:10521: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  wx_cv_sizeof_wchar_t=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  wx_cv_sizeof_wchar_t=0
fi
rm -fr conftest*
fi


fi

echo "$ac_t""$wx_cv_sizeof_wchar_t" 1>&6

cat >> confdefs.h <<EOF
#define SIZEOF_WCHAR_T $wx_cv_sizeof_wchar_t
EOF



echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
echo "configure:10545: checking whether byte ordering is bigendian" >&5
if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_cv_c_bigendian=unknown
# See if sys/param.h defines the BYTE_ORDER macro.
cat > conftest.$ac_ext <<EOF
#line 10552 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
int main() {

#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN
 bogus endian macros
#endif
; return 0; }
EOF
if { (eval echo configure:10563: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  # It does; now see whether it defined to BIG_ENDIAN or not.
cat > conftest.$ac_ext <<EOF
#line 10567 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
int main() {

#if BYTE_ORDER != BIG_ENDIAN
 not big endian
#endif
; return 0; }
EOF
if { (eval echo configure:10578: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  ac_cv_c_bigendian=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_c_bigendian=no
fi
rm -f conftest*
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*
if test $ac_cv_c_bigendian = unknown; then
if test "$cross_compiling" = yes; then
  ac_cv_c_bigendian=unknown
else
  cat > conftest.$ac_ext <<EOF
#line 10598 "configure"
#include "confdefs.h"
main () {
  /* Are we little or big endian?  From Harbison&Steele.  */
  union
  {
    long l;
    char c[sizeof (long)];
  } u;
  u.l = 1;
  exit (u.c[sizeof (long) - 1] == 1);
}
EOF
if { (eval echo configure:10611: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_c_bigendian=no
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_c_bigendian=yes
fi
rm -fr conftest*
fi

fi
fi

echo "$ac_t""$ac_cv_c_bigendian" 1>&6
if test $ac_cv_c_bigendian = unknown; then
  echo "configure: warning: Assuming little-endian target machine - this may be overriden by adding the line "ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'}" to config.cache file" 1>&2
fi
if test $ac_cv_c_bigendian = yes; then
  cat >> confdefs.h <<\EOF
#define WORDS_BIGENDIAN 1
EOF

fi



  if test "$cross_compiling" = "yes"; then
    cat >> confdefs.h <<\EOF
#define wxUSE_IOSTREAMH 1
EOF

  else
    
    ac_ext=C
# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cxx_cross


    for ac_hdr in iostream
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:10658: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 10663 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:10668: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done


    if test "x$HAVE_IOSTREAM" = x ; then
      cat >> confdefs.h <<\EOF
#define wxUSE_IOSTREAMH 1
EOF

    else
      :
    fi

    ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

  fi



  echo $ac_n "checking if C++ compiler supports bool""... $ac_c" 1>&6
echo "configure:10716: checking if C++ compiler supports bool" >&5
if eval "test \"`echo '$''{'wx_cv_cpp_bool'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
    
    ac_ext=C
# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cxx_cross


    cat > conftest.$ac_ext <<EOF
#line 10731 "configure"
#include "confdefs.h"

      
int main() {

        bool b = true;

        return 0;
      
; return 0; }
EOF
if { (eval echo configure:10743: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  
        cat >> confdefs.h <<\EOF
#define HAVE_BOOL 1
EOF

        wx_cv_cpp_bool=yes
      
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  
        wx_cv_cpp_bool=no
      
    
fi
rm -f conftest*

    ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

  
fi

echo "$ac_t""$wx_cv_cpp_bool" 1>&6

  if test "$wx_cv_cpp_bool" = "yes"; then
    cat >> confdefs.h <<\EOF
#define HAVE_BOOL 1
EOF

  fi



echo $ac_n "checking if you need GNU extensions""... $ac_c" 1>&6
echo "configure:10785: checking if you need GNU extensions" >&5
if eval "test \"`echo '$''{'wx_cv_gnu_extensions'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
   cat > conftest.$ac_ext <<EOF
#line 10791 "configure"
#include "confdefs.h"
#include <features.h>
int main() {


#ifndef __GNU_LIBRARY__
 Compile error wanted
#endif


; return 0; }
EOF
if { (eval echo configure:10804: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  wx_cv_gnu_extensions=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  wx_cv_gnu_extensions=no
fi
rm -f conftest*

fi


echo "$ac_t""$wx_cv_gnu_extensions" 1>&6
if test "$wx_cv_gnu_extensions" = "yes"; then
  cat >> confdefs.h <<EOF
#define _GNU_SOURCE 1
EOF

fi



echo $ac_n "checking for wcslen in -lc""... $ac_c" 1>&6
echo "configure:10829: checking for wcslen in -lc" >&5
ac_lib_var=`echo c'_'wcslen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lc  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 10837 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char wcslen();

int main() {
wcslen()
; return 0; }
EOF
if { (eval echo configure:10848: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  
            cat >> confdefs.h <<\EOF
#define HAVE_WCSLEN 1
EOF

            WCHAR_LINK=""
        
else
  echo "$ac_t""no" 1>&6

            echo $ac_n "checking for wcslen in -lw""... $ac_c" 1>&6
echo "configure:10874: checking for wcslen in -lw" >&5
ac_lib_var=`echo w'_'wcslen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lw  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 10882 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char wcslen();

int main() {
wcslen()
; return 0; }
EOF
if { (eval echo configure:10893: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  
                cat >> confdefs.h <<\EOF
#define HAVE_WCSLEN 1
EOF

                WCHAR_LINK="-lw"
            
else
  echo "$ac_t""no" 1>&6
fi

        
fi


echo $ac_n "checking for vprintf""... $ac_c" 1>&6
echo "configure:10924: checking for vprintf" >&5
if eval "test \"`echo '$''{'ac_cv_func_vprintf'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 10929 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char vprintf(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char vprintf();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_vprintf) || defined (__stub___vprintf)
choke me
#else
vprintf();
#endif

; return 0; }
EOF
if { (eval echo configure:10952: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_vprintf=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_vprintf=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'vprintf`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  cat >> confdefs.h <<\EOF
#define HAVE_VPRINTF 1
EOF

else
  echo "$ac_t""no" 1>&6
fi

if test "$ac_cv_func_vprintf" != yes; then
echo $ac_n "checking for _doprnt""... $ac_c" 1>&6
echo "configure:10976: checking for _doprnt" >&5
if eval "test \"`echo '$''{'ac_cv_func__doprnt'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 10981 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char _doprnt(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char _doprnt();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub__doprnt) || defined (__stub____doprnt)
choke me
#else
_doprnt();
#endif

; return 0; }
EOF
if { (eval echo configure:11004: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func__doprnt=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func__doprnt=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'_doprnt`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  cat >> confdefs.h <<\EOF
#define HAVE_DOPRNT 1
EOF

else
  echo "$ac_t""no" 1>&6
fi

fi







echo $ac_n "checking for vsnprintf""... $ac_c" 1>&6
echo "configure:11035: checking for vsnprintf" >&5
if eval "test \"`echo '$''{'wx_cv_func_vsnprintf'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
  cat > conftest.$ac_ext <<EOF
#line 11041 "configure"
#include "confdefs.h"

                    #include <stdio.h>
                    #include <stdarg.h>
                 
int main() {

                    int wx_test_vsnprintf(const char *, ...);

                    wx_test_vsnprintf("%s");
                    return 0;
                 }

                 int wx_test_vsnprintf(const char *fmt, ...)
                 {
                    char *s;

                    va_list argp;
                    va_start(argp, fmt);
                    vsnprintf(s, 42, fmt, argp);
                    va_end(argp);
                 
; return 0; }
EOF
if { (eval echo configure:11066: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  
                    wx_cv_func_vsnprintf=yes
                 
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  
                    cat > conftest.$ac_ext <<EOF
#line 11077 "configure"
#include "confdefs.h"

                                      #include <stdio.h>
                                      #include <stdarg.h>
                                   
int main() {

                                      int wx_test_vsnprintf(const char *, ...);

                                      wx_test_vsnprintf("%s");
                                      return 0;
                                   }

                                   int wx_test_vsnprintf(const char *fmt, ...)
                                   {
                                      char *s;

                                      va_list argp;
                                      va_start(argp, fmt);
                                      _vsnprintf(s, 42, fmt, argp);
                                      va_end(argp);
                                   
; return 0; }
EOF
if { (eval echo configure:11102: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  
                                      wx_cv_func_vsnprintf=yes
                                   
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  
                                      wx_cv_func_vsnprintf=no
                                   
fi
rm -f conftest*
                 
fi
rm -f conftest*

fi

echo "$ac_t""$wx_cv_func_vsnprintf" 1>&6

if test "$wx_cv_func_vsnprintf" = yes; then
    cat >> confdefs.h <<\EOF
#define HAVE_VSNPRINTF 1
EOF

else
    echo "configure: warning: unsafe function sprintf will be used instead of snprintf" 1>&2
fi

echo $ac_n "checking for vsscanf""... $ac_c" 1>&6
echo "configure:11134: checking for vsscanf" >&5
if eval "test \"`echo '$''{'wx_cv_func_vsscanf'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
  cat > conftest.$ac_ext <<EOF
#line 11140 "configure"
#include "confdefs.h"

                    #include <stdio.h>
                    #include <stdarg.h>
                
int main() {

                    int wx_test_vsscanf(const char *, ...);

                    wx_test_vsscanf("%d");
                    return 0;
                }

                int wx_test_vsscanf(const char *fmt, ...)
                {
                    va_list argp;
                    va_start(argp, fmt);
                    vsscanf("42", fmt, argp);
                    va_end(argp);
                
; return 0; }
EOF
if { (eval echo configure:11163: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  
                    wx_cv_func_vsscanf=yes
                
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  
                    wx_cv_func_vsscanf=no
                
fi
rm -f conftest*

fi

echo "$ac_t""$wx_cv_func_vsscanf" 1>&6

if test "$wx_cv_func_vsscanf" = yes; then
    cat >> confdefs.h <<\EOF
#define HAVE_VSSCANF 1
EOF

fi



if test "$TOOLKIT" != "MSW"; then



ac_ext=C
# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cxx_cross

echo $ac_n "checking if iconv() takes char**""... $ac_c" 1>&6
echo "configure:11203: checking if iconv() takes char**" >&5
if eval "test \"`echo '$''{'wx_cv_iconv_takes_char'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
    cat > conftest.$ac_ext <<EOF
#line 11209 "configure"
#include "confdefs.h"
#include <iconv.h>
int main() {

        char **inbuf, **outbuf;
	iconv_t cd;
	size_t insz, outsz;
	iconv(cd, inbuf, &insz, outbuf, &outsz);
    
; return 0; }
EOF
if { (eval echo configure:11221: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  wx_cv_iconv_takes_char=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  wx_cv_iconv_takes_char=no
fi
rm -f conftest*

fi

echo "$ac_t""$wx_cv_iconv_takes_char" 1>&6
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

if test "$wx_cv_iconv_takes_char" = yes ; then
    cat >> confdefs.h <<\EOF
#define WX_ICONV_TAKES_CHAR 1
EOF

fi


if test "$wxUSE_ON_FATAL_EXCEPTION" = "yes" -a "$wxUSE_UNIX" = "yes"; then
    for ac_func in sigaction
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:11254: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 11259 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:11282: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done


    if test "$ac_cv_func_sigaction" = "no"; then
        echo "configure: warning: No POSIX signal functions on this system, wxApp::OnFatalException will not be called" 1>&2
        wxUSE_ON_FATAL_EXCEPTION=no
    fi

    if test "$wxUSE_ON_FATAL_EXCEPTION" = "yes"; then
      
      ac_ext=C
# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cxx_cross


      echo $ac_n "checking for sa_handler type""... $ac_c" 1>&6
echo "configure:11323: checking for sa_handler type" >&5
if eval "test \"`echo '$''{'wx_cv_type_sa_handler'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
        cat > conftest.$ac_ext <<EOF
#line 11329 "configure"
#include "confdefs.h"
#include <signal.h>
int main() {

                        extern void testSigHandler(int);

                        struct sigaction sa;
                        sa.sa_handler = testSigHandler;
                     
; return 0; }
EOF
if { (eval echo configure:11341: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  
                        wx_cv_type_sa_handler=int
                     
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  
                        wx_cv_type_sa_handler=void
                     
fi
rm -f conftest*
      
fi

echo "$ac_t""$wx_cv_type_sa_handler" 1>&6

      ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross


      cat >> confdefs.h <<EOF
#define wxTYPE_SA_HANDLER $wx_cv_type_sa_handler
EOF

    fi
fi

for ac_func in vfork
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:11378: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 11383 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:11406: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done


if test "$wxUSE_SNGLINST_CHECKER" = "yes"; then
    for ac_func in fcntl flock
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:11435: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 11440 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:11463: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 break
else
  echo "$ac_t""no" 1>&6
fi
done


    if test "$ac_cv_func_fcntl" != "yes" -a "$ac_cv_func_flock" != "yes"; then
        echo "configure: warning: wxSingleInstanceChecker not available" 1>&2
        wxUSE_SNGLINST_CHECKER=no
    fi
fi

for ac_func in timegm
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:11497: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 11502 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:11525: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done


for ac_func in putenv setenv
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:11553: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 11558 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:11581: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 break
else
  echo "$ac_t""no" 1>&6
fi
done


HAVE_SOME_SLEEP_FUNC=0
if test "$USE_BEOS" = 1; then
            cat >> confdefs.h <<\EOF
#define HAVE_SLEEP 1
EOF

    HAVE_SOME_SLEEP_FUNC=1
fi

if test "$USE_MAC" = 1; then
            cat >> confdefs.h <<\EOF
#define HAVE_USLEEP 1
EOF

    HAVE_SOME_SLEEP_FUNC=1
fi

if test "$HAVE_SOME_SLEEP_FUNC" != 1; then
        POSIX4_LINK=
    for ac_func in nanosleep
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:11628: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 11633 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:11656: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 cat >> confdefs.h <<\EOF
#define HAVE_NANOSLEEP 1
EOF

else
  echo "$ac_t""no" 1>&6
echo $ac_n "checking for nanosleep in -lposix4""... $ac_c" 1>&6
echo "configure:11681: checking for nanosleep in -lposix4" >&5
ac_lib_var=`echo posix4'_'nanosleep | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lposix4  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 11689 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char nanosleep();

int main() {
nanosleep()
; return 0; }
EOF
if { (eval echo configure:11700: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  
                    cat >> confdefs.h <<\EOF
#define HAVE_NANOSLEEP 1
EOF

                    POSIX4_LINK="-lposix4"
                
else
  echo "$ac_t""no" 1>&6

                    for ac_func in usleep
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:11728: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 11733 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:11756: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 cat >> confdefs.h <<\EOF
#define HAVE_USLEEP 1
EOF

else
  echo "$ac_t""no" 1>&6
echo "configure: warning: wxSleep() function will not work" 1>&2
                    
fi
done

                
            
fi

        
    
fi
done

fi

for ac_func in uname gethostname
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:11799: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 11804 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:11827: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 break
else
  echo "$ac_t""no" 1>&6
fi
done



ac_ext=C
# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cxx_cross


for ac_func in strtok_r
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:11864: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 11869 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:11895: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done


ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross


INET_LINK=
for ac_func in inet_addr
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:11932: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 11937 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:11960: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 cat >> confdefs.h <<\EOF
#define HAVE_INET_ADDR 1
EOF

else
  echo "$ac_t""no" 1>&6
echo $ac_n "checking for inet_addr in -lnsl""... $ac_c" 1>&6
echo "configure:11985: checking for inet_addr in -lnsl" >&5
ac_lib_var=`echo nsl'_'inet_addr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lnsl  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 11993 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char inet_addr();

int main() {
inet_addr()
; return 0; }
EOF
if { (eval echo configure:12004: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  INET_LINK="nsl"
else
  echo "$ac_t""no" 1>&6
echo $ac_n "checking for inet_addr in -lresolv""... $ac_c" 1>&6
echo "configure:12023: checking for inet_addr in -lresolv" >&5
ac_lib_var=`echo resolv'_'inet_addr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lresolv  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 12031 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char inet_addr();

int main() {
inet_addr()
; return 0; }
EOF
if { (eval echo configure:12042: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  INET_LINK="resolv"
            
else
  echo "$ac_t""no" 1>&6
fi

        
fi

    

fi
done


for ac_func in inet_aton
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:12075: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 12080 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:12103: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 cat >> confdefs.h <<\EOF
#define HAVE_INET_ATON 1
EOF

else
  echo "$ac_t""no" 1>&6
            echo $ac_n "checking for inet_aton in -l$INET_LINK""... $ac_c" 1>&6
echo "configure:12128: checking for inet_aton in -l$INET_LINK" >&5
ac_lib_var=`echo $INET_LINK'_'inet_aton | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-l$INET_LINK  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 12136 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char inet_aton();

int main() {
inet_aton()
; return 0; }
EOF
if { (eval echo configure:12147: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  cat >> confdefs.h <<\EOF
#define HAVE_INET_ATON 1
EOF

else
  echo "$ac_t""no" 1>&6
fi

        
fi
done


if test "x$INET_LINK" != "x"; then
    cat >> confdefs.h <<\EOF
#define HAVE_INET_ADDR 1
EOF

    INET_LINK="-l$INET_LINK"
fi

fi


cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs.  It is not useful on other systems.
# If it contains results you don't want to keep, you may remove or edit it.
#
# By default, configure uses ./config.cache as the cache file,
# creating it if it does not exist already.  You can give configure
# the --cache-file=FILE option to use a different cache file; that is
# what configure does when it calls configure scripts in
# subdirectories, so they share the cache.
# Giving --cache-file=/dev/null disables caching, for debugging configure.
# config.status only pays attention to the cache file if you give it the
# --recheck option to rerun configure.
#
EOF
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
  case `(ac_space=' '; set | grep ac_space) 2>&1` in
  *ac_space=\ *)
    # `set' does not quote correctly, so add quotes (double-quote substitution
    # turns \\\\ into \\, and sed turns \\ into \).
    sed -n \
      -e "s/'/'\\\\''/g" \
      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
    ;;
  *)
    # `set' quotes correctly as required by POSIX, so do not add quotes.
    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
    ;;
  esac >> confcache
if cmp -s $cache_file confcache; then
  :
else
  if test -w $cache_file; then
    echo "updating cache $cache_file"
    cat confcache > $cache_file
  else
    echo "not updating unwritable cache $cache_file"
  fi
fi
rm -f confcache



if test "$TOOLKIT" != "MSW"; then


THREADS_LINK=""
THREADS_OBJ=""

if test "$wxUSE_THREADS" = "yes" ; then
    if test "$wxUSE_WINE" = 1 ; then
        echo "configure: warning: Threads are not supported under WINE" 1>&2
        wxUSE_THREADS="no"
    elif test "$USE_BEOS" = 1; then
        echo "configure: warning: BeOS threads are not yet supported" 1>&2
        wxUSE_THREADS="no"
    fi
fi

if test "$wxUSE_THREADS" = "yes" ; then
    
        if test "$USE_AIX" = 1; then
        THREADS_LIB=pthreads
    elif test "$USE_MAC" = 1; then
        THREADS_LIB=cc_dynamic
    else
        THREADS_LIB=pthread
    fi

                echo $ac_n "checking for pthread_create in -l$THREADS_LIB""... $ac_c" 1>&6
echo "configure:12262: checking for pthread_create in -l$THREADS_LIB" >&5
ac_lib_var=`echo $THREADS_LIB'_'pthread_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-l$THREADS_LIB  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 12270 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char pthread_create();

int main() {
pthread_create()
; return 0; }
EOF
if { (eval echo configure:12281: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  
            THREADS_OBJ="threadpsx.lo"
            THREADS_LINK=$THREADS_LIB
        
else
  echo "$ac_t""no" 1>&6

                        echo $ac_n "checking for pthread_create in -lc_r""... $ac_c" 1>&6
echo "configure:12304: checking for pthread_create in -lc_r" >&5
ac_lib_var=`echo c_r'_'pthread_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lc_r  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 12312 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char pthread_create();

int main() {
pthread_create()
; return 0; }
EOF
if { (eval echo configure:12323: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  
                THREADS_OBJ="threadpsx.lo"
                THREADS_LINK="c_r"
            
else
  echo "$ac_t""no" 1>&6

                                echo $ac_n "checking for pthread_create in -lcc_dynamic""... $ac_c" 1>&6
echo "configure:12346: checking for pthread_create in -lcc_dynamic" >&5
ac_lib_var=`echo cc_dynamic'_'pthread_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lcc_dynamic  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 12354 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char pthread_create();

int main() {
pthread_create()
; return 0; }
EOF
if { (eval echo configure:12365: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  
                    THREADS_OBJ="threadpsx.lo"
                    THREADS_LINK="cc_dynamic"
                
else
  echo "$ac_t""no" 1>&6

                                        ac_safe=`echo "sys/prctl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for sys/prctl.h""... $ac_c" 1>&6
echo "configure:12389: checking for sys/prctl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 12394 "configure"
#include "confdefs.h"
#include <sys/prctl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:12399: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  
                        THREADS_OBJ="threadsgi.lo"
                    
else
  echo "$ac_t""no" 1>&6
fi

                
fi

            
fi

        
fi


    if test -z "$THREADS_OBJ" ; then
        wxUSE_THREADS=no
        echo "configure: warning: No thread support on this system" 1>&2
    fi
fi

if test "$wxUSE_THREADS" = "yes" ; then
  for ac_func in thr_setconcurrency
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:12442: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 12447 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:12470: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done


                            
  for ac_hdr in sched.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:12500: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 12505 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:12510: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done


  echo $ac_n "checking for sched_yield in -l$THREADS_LINK""... $ac_c" 1>&6
echo "configure:12538: checking for sched_yield in -l$THREADS_LINK" >&5
ac_lib_var=`echo $THREADS_LINK'_'sched_yield | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-l$THREADS_LINK  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 12546 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char sched_yield();

int main() {
sched_yield()
; return 0; }
EOF
if { (eval echo configure:12557: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  cat >> confdefs.h <<\EOF
#define HAVE_SCHED_YIELD 1
EOF

else
  echo "$ac_t""no" 1>&6
echo $ac_n "checking for sched_yield in -l"posix4"""... $ac_c" 1>&6
echo "configure:12579: checking for sched_yield in -l"posix4"" >&5
ac_lib_var=`echo "posix4"'_'sched_yield | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-l"posix4"  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 12587 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char sched_yield();

int main() {
sched_yield()
; return 0; }
EOF
if { (eval echo configure:12598: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  cat >> confdefs.h <<\EOF
#define HAVE_SCHED_YIELD 1
EOF
 POSIX4_LINK="-lposix4"
else
  echo "$ac_t""no" 1>&6
echo "configure: warning: wxThread::Yield will not work properly" 1>&2
                
fi

               
fi


              HAVE_PRIOR_FUNCS=0
  echo $ac_n "checking for pthread_attr_getschedpolicy in -l$THREADS_LINK""... $ac_c" 1>&6
echo "configure:12629: checking for pthread_attr_getschedpolicy in -l$THREADS_LINK" >&5
ac_lib_var=`echo $THREADS_LINK'_'pthread_attr_getschedpolicy | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-l$THREADS_LINK  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 12637 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char pthread_attr_getschedpolicy();

int main() {
pthread_attr_getschedpolicy()
; return 0; }
EOF
if { (eval echo configure:12648: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  echo $ac_n "checking for pthread_attr_setschedparam in -l$THREADS_LINK""... $ac_c" 1>&6
echo "configure:12664: checking for pthread_attr_setschedparam in -l$THREADS_LINK" >&5
ac_lib_var=`echo $THREADS_LINK'_'pthread_attr_setschedparam | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-l$THREADS_LINK  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 12672 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char pthread_attr_setschedparam();

int main() {
pthread_attr_setschedparam()
; return 0; }
EOF
if { (eval echo configure:12683: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  echo $ac_n "checking for sched_get_priority_max in -l$THREADS_LINK""... $ac_c" 1>&6
echo "configure:12699: checking for sched_get_priority_max in -l$THREADS_LINK" >&5
ac_lib_var=`echo $THREADS_LINK'_'sched_get_priority_max | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-l$THREADS_LINK  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 12707 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char sched_get_priority_max();

int main() {
sched_get_priority_max()
; return 0; }
EOF
if { (eval echo configure:12718: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  HAVE_PRIOR_FUNCS=1
else
  echo "$ac_t""no" 1>&6
echo $ac_n "checking for sched_get_priority_max in -l"posix4"""... $ac_c" 1>&6
echo "configure:12737: checking for sched_get_priority_max in -l"posix4"" >&5
ac_lib_var=`echo "posix4"'_'sched_get_priority_max | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-l"posix4"  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 12745 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char sched_get_priority_max();

int main() {
sched_get_priority_max()
; return 0; }
EOF
if { (eval echo configure:12756: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  
                            HAVE_PRIOR_FUNCS=1
                            POSIX4_LINK="-lposix4"
                         
else
  echo "$ac_t""no" 1>&6
fi

                   
fi

                 
else
  echo "$ac_t""no" 1>&6
fi

               
else
  echo "$ac_t""no" 1>&6
fi


  if test "$HAVE_PRIOR_FUNCS" = 1; then
    cat >> confdefs.h <<\EOF
#define HAVE_THREAD_PRIORITY_FUNCTIONS 1
EOF

  else
    echo "configure: warning: Setting thread priority will not work" 1>&2
  fi

  echo $ac_n "checking for pthread_cancel in -l$THREADS_LINK""... $ac_c" 1>&6
echo "configure:12803: checking for pthread_cancel in -l$THREADS_LINK" >&5
ac_lib_var=`echo $THREADS_LINK'_'pthread_cancel | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-l$THREADS_LINK  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 12811 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char pthread_cancel();

int main() {
pthread_cancel()
; return 0; }
EOF
if { (eval echo configure:12822: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  cat >> confdefs.h <<\EOF
#define HAVE_PTHREAD_CANCEL 1
EOF

else
  echo "$ac_t""no" 1>&6
echo "configure: warning: wxThread::Kill() will not work properly" 1>&2
fi


  echo $ac_n "checking for pthread_cleanup_push/pop""... $ac_c" 1>&6
echo "configure:12848: checking for pthread_cleanup_push/pop" >&5
if eval "test \"`echo '$''{'wx_cv_func_pthread_cleanup_push'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
    cat > conftest.$ac_ext <<EOF
#line 12854 "configure"
#include "confdefs.h"
#include <pthread.h>
int main() {

                    pthread_cleanup_push(NULL, NULL);
                    pthread_cleanup_pop(0);
                 
; return 0; }
EOF
if { (eval echo configure:12864: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  
                    wx_cv_func_pthread_cleanup_push=yes
                 
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  
                    wx_cv_func_pthread_cleanup_push=no
                 
fi
rm -f conftest*
  
fi

echo "$ac_t""$wx_cv_func_pthread_cleanup_push" 1>&6

  if test "$wx_cv_func_pthread_cleanup_push" = "yes"; then
      cat >> confdefs.h <<\EOF
#define HAVE_THREAD_CLEANUP_FUNCTIONS 1
EOF

  fi

                
  echo $ac_n "checking for pthread_mutexattr_t""... $ac_c" 1>&6
echo "configure:12892: checking for pthread_mutexattr_t" >&5
if eval "test \"`echo '$''{'wx_cv_type_pthread_mutexattr_t'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
    cat > conftest.$ac_ext <<EOF
#line 12898 "configure"
#include "confdefs.h"
#include <pthread.h>
int main() {

           pthread_mutexattr_t attr;
           pthread_mutexattr_settype(&attr, PTHREAD_MUTEX_RECURSIVE);
        
; return 0; }
EOF
if { (eval echo configure:12908: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  
           wx_cv_type_pthread_mutexattr_t=yes
        
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  
           wx_cv_type_pthread_mutexattr_t=no
        
    
fi
rm -f conftest*
  
fi

echo "$ac_t""$wx_cv_type_pthread_mutexattr_t" 1>&6

  if test "$wx_cv_type_pthread_mutexattr_t" = "yes"; then
    cat >> confdefs.h <<\EOF
#define HAVE_PTHREAD_MUTEXATTR_T 1
EOF

  else
        echo $ac_n "checking for PTHREAD_RECURSIVE_MUTEX_INITIALIZER""... $ac_c" 1>&6
echo "configure:12935: checking for PTHREAD_RECURSIVE_MUTEX_INITIALIZER" >&5
if eval "test \"`echo '$''{'wx_cv_type_pthread_rec_mutex_init'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
        cat > conftest.$ac_ext <<EOF
#line 12941 "configure"
#include "confdefs.h"
#include <pthread.h>
int main() {

                pthread_mutex_t attr = PTHREAD_RECURSIVE_MUTEX_INITIALIZER_NP;
            
; return 0; }
EOF
if { (eval echo configure:12950: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  
                wx_cv_type_pthread_rec_mutex_init=yes
            
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  
                wx_cv_type_pthread_rec_mutex_init=no
            
        
fi
rm -f conftest*
    
fi

echo "$ac_t""$wx_cv_type_pthread_rec_mutex_init" 1>&6
    if test "$wx_cv_type_pthread_rec_mutex_init" = "yes"; then
      cat >> confdefs.h <<\EOF
#define HAVE_PTHREAD_RECURSIVE_MUTEX_INITIALIZER 1
EOF

    else
            echo "configure: warning: wxMutex won't be recursive on this platform" 1>&2
    fi
  fi

  THREADS_LINK="-l$THREADS_LINK"

      if test "$USE_SOLARIS" = "yes" -a "$GCC" != "yes"; then
      CFLAGS="${CFLAGS} -mt"
      CXXFLAGS="${CXXFLAGS} -mt"
      LDFLAGS="${LDFLAGS} -mt"
  fi
fi

fi

if test "$wxUSE_THREADS" = "yes"; then
  cat >> confdefs.h <<\EOF
#define wxUSE_THREADS 1
EOF


    if test "$wxUSE_MAC" = "0"; then
    CFLAGS="${CFLAGS} -D_REENTRANT"
    CXXFLAGS="${CXXFLAGS} -D_REENTRANT"
  fi

  SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS thread"
else
      if test "$ac_cv_func_strtok_r" = "yes"; then
    echo $ac_n "checking if -D_REENTRANT is needed""... $ac_c" 1>&6
echo "configure:13005: checking if -D_REENTRANT is needed" >&5
    if test "$NEEDS_D_REENTRANT_FOR_R_FUNCS" = 1; then
        CFLAGS="${CFLAGS} -D_REENTRANT"
        CXXFLAGS="${CXXFLAGS} -D_REENTRANT"
        echo "$ac_t""yes" 1>&6
    else
        echo "$ac_t""no" 1>&6
    fi
  fi
fi

if test "$WXGTK20" = 1 ; then
  cat >> confdefs.h <<EOF
#define __WXGTK20__ $WXGTK20
EOF

  WXGTK12=1
fi

if test "$WXGTK12" = 1 ; then
  cat >> confdefs.h <<EOF
#define __WXGTK12__ $WXGTK12
EOF

fi

if test "$WXGTK127" = 1 ; then
  cat >> confdefs.h <<EOF
#define __WXGTK127__ $WXGTK127
EOF

fi

if test "$WXWINE" = 1 ; then
  TOOLKIT_DEF="${TOOLKIT_DEF} -D__WXWINE__"
fi

if test "$wxUSE_MAC" = 1 ; then
  TOOLKIT_DEF="${TOOLKIT_DEF} -D__UNIX__ -D__POWERPC__ -DTARGET_CARBON"
  CFLAGS="${CFLAGS} -fno-common -fpascal-strings"
  CPPFLAGS="${CPPFLAGS} -fno-common -fpascal-strings"
  # Extract the first word of "Rez", so it can be a program name with args.
set dummy Rez; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:13049: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_REZ'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$REZ"; then
  ac_cv_prog_REZ="$REZ" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_REZ="Rez"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_prog_REZ" && ac_cv_prog_REZ="/Developer/Tools/Rez"
fi
fi
REZ="$ac_cv_prog_REZ"
if test -n "$REZ"; then
  echo "$ac_t""$REZ" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

  # Extract the first word of "Derez", so it can be a program name with args.
set dummy Derez; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:13079: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DEREZ'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$DEREZ"; then
  ac_cv_prog_DEREZ="$DEREZ" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_DEREZ="Derez"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_prog_DEREZ" && ac_cv_prog_DEREZ="/Developer/Tools/Derez"
fi
fi
DEREZ="$ac_cv_prog_DEREZ"
if test -n "$DEREZ"; then
  echo "$ac_t""$DEREZ" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

  RESCOMP=${REZ}
  REZFLAGS="-d __UNIX__ -useDF"
  DEREZFLAGS="Carbon.r -useDF"
  RESFLAGS="Carbon.r -t APPL"
  LIBWXMACRES="\$(LIBWX_MACRES)"
  LIBWXMACRESCOMP="\$(LIBWX_MACRESCOMP)"
fi

if test "$wxUSE_CYGWIN" = 1 ; then
  TOOLKIT_DEF="${TOOLKIT_DEF} -D__WIN95__"
fi

WXDEBUG=

if test "$wxUSE_DEBUG_INFO" = "yes" ; then
    WXDEBUG="-g"
    wxUSE_OPTIMISE=no
fi

if test "$wxUSE_DEBUG_GDB" = "yes" ; then
    wxUSE_DEBUG_INFO=yes
    WXDEBUG="-ggdb"
fi

if test "$wxUSE_DEBUG_FLAG" = "yes" ; then
    cat >> confdefs.h <<\EOF
#define WXDEBUG 1
EOF

    WXDEBUG_DEFINE="-D__WXDEBUG__"
else
    if test "$wxUSE_GTK" = 1 ; then
        WXDEBUG_DEFINE="-DGTK_NO_CHECK_CASTS"
    fi
fi

if test "$wxUSE_MEM_TRACING" = "yes" ; then
    cat >> confdefs.h <<\EOF
#define wxUSE_MEMORY_TRACING 1
EOF

    cat >> confdefs.h <<\EOF
#define wxUSE_GLOBAL_MEMORY_OPERATORS 1
EOF

    cat >> confdefs.h <<\EOF
#define wxUSE_DEBUG_NEW_ALWAYS 1
EOF

    SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS memcheck"
fi

if test "$wxUSE_DMALLOC" = "yes" ; then
    DMALLOC_LINK="-ldmalloc"
fi

PROFILE=
if test "$wxUSE_PROFILE" = "yes" ; then
    PROFILE="-pg"
fi

DEP_INFO_FLAGS=
CODE_GEN_FLAGS=
CODE_GEN_FLAGS_CXX=
if test "$GCC" = yes ; then
    if test "$wxUSE_NO_RTTI" = "yes" ; then
        CODE_GEN_FLAGS_CXX="$CODE_GEN_FLAGS -fno-rtti"
    fi
    if test "$wxUSE_NO_EXCEPTIONS" = "yes" ; then
        CODE_GEN_FLAGS_CXX="$CODE_GEN_FLAGS -fno-exceptions"
    fi
    if test "$wxUSE_PERMISSIVE" = "yes" ; then
       CODE_GEN_FLAGS="$CODE_GEN_FLAGS -fpermissive"
    fi
    if test "$wxUSE_NO_DEPS" = "no" ; then
        DEP_INFO_FLAGS="-MMD"
    fi
fi


CXXFLAGS=`echo "${CXXFLAGS}" | sed "s/\-O.//g" `
CFLAGS=`echo "${CFLAGS}" | sed "s/\-O.//g" `
if test "$wxUSE_OPTIMISE" = "no" ; then
    OPTIMISE=
else
    if test "$GCC" = yes ; then
        OPTIMISE="-O2"
        case "${host}" in
            i586-*-*|i686-*-* )
            OPTIMISE="${OPTIMISE} "
        ;;
        esac
    else
        OPTIMISE="-O"
    fi
fi


ZLIB_INCLUDE=
if test "$wxUSE_ZLIB" = "yes" -o "$wxUSE_ZLIB" = "sys" ; then
  cat >> confdefs.h <<\EOF
#define wxUSE_ZLIB 1
EOF

  if test "$wxUSE_ZLIB" = "yes" ; then
    ZLIB_INCLUDE="-I\${top_srcdir}/src/zlib"
  else
    ZLIB_LINK=
    ac_safe=`echo "zlib.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for zlib.h""... $ac_c" 1>&6
echo "configure:13216: checking for zlib.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 13221 "configure"
#include "confdefs.h"
#include <zlib.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:13226: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  echo $ac_n "checking for deflate in -lz""... $ac_c" 1>&6
echo "configure:13243: checking for deflate in -lz" >&5
ac_lib_var=`echo z'_'deflate | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lz  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 13251 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char deflate();

int main() {
deflate()
; return 0; }
EOF
if { (eval echo configure:13262: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  ZLIB_LINK="-lz"
else
  echo "$ac_t""no" 1>&6
fi

else
  echo "$ac_t""no" 1>&6
fi

    if test "x$ZLIB_LINK" = "x" ; then
        { echo "configure: error: system zlib compression library not found! Use --with-zlib=yes to use built-in zlib" 1>&2; exit 1; }
    fi
  fi
fi

PNG_INCLUDE=
if test "$wxUSE_LIBPNG" = "yes" -o "$wxUSE_LIBPNG" = "sys" ; then
  cat >> confdefs.h <<\EOF
#define wxUSE_LIBPNG 1
EOF

      if test "$wxUSE_LIBPNG" = "sys" -a "$wxUSE_ZLIB" != "sys" ; then
    echo "configure: warning: --with-libpng=sys doesn't work without --with-zlib=sys, will compile the built-in libpng instead" 1>&2
    wxUSE_LIBPNG=yes
  fi

  if test "$wxUSE_LIBPNG" = "yes" ; then
    PNG_INCLUDE="-I\${top_srcdir}/src/png"
  else
    PNG_LINK=
    ac_safe=`echo "png.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for png.h""... $ac_c" 1>&6
echo "configure:13309: checking for png.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 13314 "configure"
#include "confdefs.h"
#include <png.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:13319: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  echo $ac_n "checking for png_check_sig in -lpng""... $ac_c" 1>&6
echo "configure:13336: checking for png_check_sig in -lpng" >&5
ac_lib_var=`echo png'_'png_check_sig | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lpng -lz -lm $LIBS"
cat > conftest.$ac_ext <<EOF
#line 13344 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char png_check_sig();

int main() {
png_check_sig()
; return 0; }
EOF
if { (eval echo configure:13355: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  PNG_LINK="-lpng"
else
  echo "$ac_t""no" 1>&6
fi

                   
else
  echo "$ac_t""no" 1>&6
fi

    if test "x$PNG_LINK" = "x" ; then
        { echo "configure: error: system png library not found! Use --with-libpng=yes to use the built-in libpng" 1>&2; exit 1; }
    fi
  fi

  SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS png"
fi

JPEG_INCLUDE=
if test "$wxUSE_LIBJPEG" = "yes" -o "$wxUSE_LIBJPEG" = "sys" ; then
  cat >> confdefs.h <<\EOF
#define wxUSE_LIBJPEG 1
EOF

  if test "$wxUSE_LIBJPEG" = "yes" ; then
    JPEG_INCLUDE="-I\${top_srcdir}/src/jpeg"
  else
    JPEG_LINK=
    ac_safe=`echo "jpeglib.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for jpeglib.h""... $ac_c" 1>&6
echo "configure:13400: checking for jpeglib.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 13405 "configure"
#include "confdefs.h"
#include <jpeglib.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:13410: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  echo $ac_n "checking for jpeg_read_header in -ljpeg""... $ac_c" 1>&6
echo "configure:13427: checking for jpeg_read_header in -ljpeg" >&5
ac_lib_var=`echo jpeg'_'jpeg_read_header | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-ljpeg  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 13435 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char jpeg_read_header();

int main() {
jpeg_read_header()
; return 0; }
EOF
if { (eval echo configure:13446: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  JPEG_LINK="-ljpeg"
else
  echo "$ac_t""no" 1>&6
fi

else
  echo "$ac_t""no" 1>&6
fi

    if test "x$JPEG_LINK" = "x" ; then
        { echo "configure: error: system jpeg library not found! Use --with-libjpeg=yes to use the built-in one" 1>&2; exit 1; }
    fi
  fi
fi

TIFF_INCLUDE=
if test "$wxUSE_LIBTIFF" = "yes" -o "$wxUSE_LIBTIFF" = "sys" ; then
  cat >> confdefs.h <<\EOF
#define wxUSE_LIBTIFF 1
EOF

  if test "$wxUSE_LIBTIFF" = "yes" ; then
    TIFF_INCLUDE="-I\${top_srcdir}/src/tiff"
  else
    TIFF_LINK=
    ac_safe=`echo "tiffio.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for tiffio.h""... $ac_c" 1>&6
echo "configure:13488: checking for tiffio.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 13493 "configure"
#include "confdefs.h"
#include <tiffio.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:13498: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  echo $ac_n "checking for TIFFError in -ltiff""... $ac_c" 1>&6
echo "configure:13515: checking for TIFFError in -ltiff" >&5
ac_lib_var=`echo tiff'_'TIFFError | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-ltiff -lm $LIBS"
cat > conftest.$ac_ext <<EOF
#line 13523 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char TIFFError();

int main() {
TIFFError()
; return 0; }
EOF
if { (eval echo configure:13534: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  TIFF_LINK="-ltiff"
else
  echo "$ac_t""no" 1>&6
fi

else
  echo "$ac_t""no" 1>&6
fi

    if test "x$TIFF_LINK" = "x" ; then
        { echo "configure: error: system tiff library not found! Use --with-libtiff=yes to use the built-in one" 1>&2; exit 1; }
    fi
  fi
fi

FREETYPE_INCLUDE=
if test "$wxUSE_FREETYPE" = "yes" -o "$wxUSE_FREETYPE" = "sys" ; then
  cat >> confdefs.h <<\EOF
#define wxUSE_FREETYPE 1
EOF

  if test "$wxUSE_FREETYPE" = "yes" ; then
    FREETYPE_INCLUDE="-I\${top_srcdir}/src/freetype"
  else
    FREETYPE_LINK=
    ac_safe=`echo "freetype.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for freetype.h""... $ac_c" 1>&6
echo "configure:13576: checking for freetype.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 13581 "configure"
#include "confdefs.h"
#include <freetype.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:13586: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  echo $ac_n "checking for FT_Render_Glyph in -lfreetype""... $ac_c" 1>&6
echo "configure:13603: checking for FT_Render_Glyph in -lfreetype" >&5
ac_lib_var=`echo freetype'_'FT_Render_Glyph | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lfreetype -lm $LIBS"
cat > conftest.$ac_ext <<EOF
#line 13611 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char FT_Render_Glyph();

int main() {
FT_Render_Glyph()
; return 0; }
EOF
if { (eval echo configure:13622: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  FREETYPE_LINK="-lfreetype"
else
  echo "$ac_t""no" 1>&6
fi

                   
else
  echo "$ac_t""no" 1>&6
fi

    if test "x$FREETYPE_LINK" = "x" ; then
        { echo "configure: error: system freetype library not found! Use --with-freetype=yes to use the built-in freetype" 1>&2; exit 1; }
    fi
  fi
fi

if test "$wxUSE_OPENGL" = "yes"; then
  ac_safe=`echo "GL/gl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for GL/gl.h""... $ac_c" 1>&6
echo "configure:13656: checking for GL/gl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 13661 "configure"
#include "confdefs.h"
#include <GL/gl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:13666: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  
    cat >> confdefs.h <<\EOF
#define wxUSE_OPENGL 1
EOF

    cat >> confdefs.h <<\EOF
#define wxUSE_GLCANVAS 1
EOF

    echo $ac_n "checking for glFlush in -lGL""... $ac_c" 1>&6
echo "configure:13692: checking for glFlush in -lGL" >&5
ac_lib_var=`echo GL'_'glFlush | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lGL  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 13700 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char glFlush();

int main() {
glFlush()
; return 0; }
EOF
if { (eval echo configure:13711: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  
      OPENGL_LINK="-lGL -lGLU"
    
else
  echo "$ac_t""no" 1>&6

        echo $ac_n "checking for glFlush in -lMesaGL""... $ac_c" 1>&6
echo "configure:13733: checking for glFlush in -lMesaGL" >&5
ac_lib_var=`echo MesaGL'_'glFlush | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lMesaGL  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 13741 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char glFlush();

int main() {
glFlush()
; return 0; }
EOF
if { (eval echo configure:13752: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  
        OPENGL_LINK="-lMesaGL -lMesaGLU"
      
else
  echo "$ac_t""no" 1>&6
fi

     
fi

    
else
  echo "$ac_t""no" 1>&6
wxUSE_OPENGL=0
fi

fi


if test "$wxUSE_GUI" = "yes"; then
  cat >> confdefs.h <<\EOF
#define wxUSE_GUI 1
EOF


                      else
  cat >> confdefs.h <<\EOF
#define wxUSE_NOGUI 1
EOF

fi


if test "$wxUSE_UNIX" = "yes"; then
  cat >> confdefs.h <<\EOF
#define wxUSE_UNIX 1
EOF

fi


if test "$wxUSE_APPLE_IEEE" = "yes"; then
  cat >> confdefs.h <<\EOF
#define wxUSE_APPLE_IEEE 1
EOF

fi

if test "$wxUSE_WAVE" = "yes"; then
  cat >> confdefs.h <<\EOF
#define wxUSE_WAVE 1
EOF

fi

if test "$wxUSE_FILE" = "yes"; then
  cat >> confdefs.h <<\EOF
#define wxUSE_FILE 1
EOF

fi

if test "$wxUSE_FILESYSTEM" = "yes"; then
  cat >> confdefs.h <<\EOF
#define wxUSE_FILESYSTEM 1
EOF

fi

if test "$wxUSE_FS_INET" = "yes"; then
  cat >> confdefs.h <<\EOF
#define wxUSE_FS_INET 1
EOF

fi

if test "$wxUSE_FS_ZIP" = "yes"; then
  cat >> confdefs.h <<\EOF
#define wxUSE_FS_ZIP 1
EOF

fi

if test "$wxUSE_ZIPSTREAM" = "yes"; then
  cat >> confdefs.h <<\EOF
#define wxUSE_ZIPSTREAM 1
EOF

fi

if test "$wxUSE_ON_FATAL_EXCEPTION" = "yes"; then
  cat >> confdefs.h <<\EOF
#define wxUSE_ON_FATAL_EXCEPTION 1
EOF

fi

if test "$wxUSE_SNGLINST_CHECKER" = "yes"; then
  cat >> confdefs.h <<\EOF
#define wxUSE_SNGLINST_CHECKER 1
EOF

fi

if test "$wxUSE_BUSYINFO" = "yes"; then
  cat >> confdefs.h <<\EOF
#define wxUSE_BUSYINFO 1
EOF

fi

if test "$wxUSE_STD_IOSTREAM" = "yes"; then
  cat >> confdefs.h <<\EOF
#define wxUSE_STD_IOSTREAM 1
EOF

fi

if test "$wxUSE_TEXTFILE" = "yes"; then
  if test "$wxUSE_FILE" != "yes"; then
    echo "configure: warning: wxTextFile requires wxFile and it won't be compiled without it" 1>&2
  else
    cat >> confdefs.h <<\EOF
#define wxUSE_TEXTFILE 1
EOF

  fi
fi

if test "$wxUSE_CONFIG" = "yes" ; then
  if test "$wxUSE_TEXTFILE" != "yes"; then
    echo "configure: warning: wxConfig requires wxTextFile and it won't be compiled without it" 1>&2
  else
    cat >> confdefs.h <<\EOF
#define wxUSE_CONFIG 1
EOF

    SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS config"
  fi
fi

if test "$wxUSE_INTL" = "yes" ; then
  if test "$wxUSE_FILE" != "yes"; then
    echo "configure: warning: I18n code requires wxFile and it won't be compiled without it" 1>&2
  else
    cat >> confdefs.h <<\EOF
#define wxUSE_INTL 1
EOF

    SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS internat"
    GUIDIST="$GUIDIST INTL_DIST"
  fi
fi

if test "$wxUSE_LOG" = "yes"; then
  cat >> confdefs.h <<\EOF
#define wxUSE_LOG 1
EOF

fi

if test "$wxUSE_LONGLONG" = "yes"; then
  cat >> confdefs.h <<\EOF
#define wxUSE_LONGLONG 1
EOF

fi

if test "$wxUSE_GEOMETRY" = "yes"; then
  cat >> confdefs.h <<\EOF
#define wxUSE_GEOMETRY 1
EOF

fi

if test "$wxUSE_DIALUP_MANAGER" = "yes" ; then
  cat >> confdefs.h <<\EOF
#define wxUSE_DIALUP_MANAGER 1
EOF

  SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS dialup"
fi

if test "$wxUSE_STREAMS" = "yes" ; then
  cat >> confdefs.h <<\EOF
#define wxUSE_STREAMS 1
EOF

fi


if test "$wxUSE_TIMEDATE" = "yes"; then
        for ac_func in strptime
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:13962: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 13967 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:13990: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done


        echo $ac_n "checking for timezone variable in <time.h>""... $ac_c" 1>&6
echo "configure:14016: checking for timezone variable in <time.h>" >&5
if eval "test \"`echo '$''{'wx_cv_var_timezone'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
                        cat > conftest.$ac_ext <<EOF
#line 14022 "configure"
#include "confdefs.h"

                                #include <time.h>
                            
int main() {

                                int tz;
                                tz = __timezone;
                            
; return 0; }
EOF
if { (eval echo configure:14034: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  
                                wx_cv_var_timezone=__timezone
                            
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  
                                cat > conftest.$ac_ext <<EOF
#line 14045 "configure"
#include "confdefs.h"

                                        #include <time.h>
                                    
int main() {

                                        int tz;
                                        tz = _timezone;
                                    
; return 0; }
EOF
if { (eval echo configure:14057: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  
                                        wx_cv_var_timezone=_timezone
                                    
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  
                                        cat > conftest.$ac_ext <<EOF
#line 14068 "configure"
#include "confdefs.h"

                                                #include <time.h>
                                            
int main() {

                                                int tz;
                                                tz = timezone;
                                            
; return 0; }
EOF
if { (eval echo configure:14080: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  
                                                wx_cv_var_timezone=timezone
                                            
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  { echo "configure: error: no timezone variable" 1>&2; exit 1; }
                                        
fi
rm -f conftest*
                                    
                                
fi
rm -f conftest*
                            
                        
fi
rm -f conftest*
                   
    
fi

echo "$ac_t""$wx_cv_var_timezone" 1>&6

        cat >> confdefs.h <<EOF
#define WX_TIMEZONE $wx_cv_var_timezone
EOF


        for ac_func in localtime
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:14115: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 14120 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:14143: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done


    if test "$ac_cv_func_localtime" = "yes"; then
        echo $ac_n "checking for tm_gmtoff in struct tm""... $ac_c" 1>&6
echo "configure:14170: checking for tm_gmtoff in struct tm" >&5
if eval "test \"`echo '$''{'wx_cv_struct_tm_has_gmtoff'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
            cat > conftest.$ac_ext <<EOF
#line 14176 "configure"
#include "confdefs.h"

                    #include <time.h>
                
int main() {

                    struct tm tm;
                    tm.tm_gmtoff++;
                
; return 0; }
EOF
if { (eval echo configure:14188: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  
                    wx_cv_struct_tm_has_gmtoff=yes
                    cat >> confdefs.h <<\EOF
#define WX_GMTOFF_IN_TM 1
EOF

                
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  wx_cv_struct_tm_has_gmtoff=no
            
fi
rm -f conftest*
        
fi

echo "$ac_t""$wx_cv_struct_tm_has_gmtoff" 1>&6
    fi

            for ac_func in gettimeofday ftime
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:14214: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 14219 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:14242: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 break
else
  echo "$ac_t""no" 1>&6
fi
done


    if test "$ac_cv_func_gettimeofday" = "yes"; then
        echo $ac_n "checking whether gettimeofday takes two arguments""... $ac_c" 1>&6
echo "configure:14269: checking whether gettimeofday takes two arguments" >&5
if eval "test \"`echo '$''{'wx_cv_func_gettimeofday_has_2_args'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
                        
            ac_ext=C
# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cxx_cross


            cat > conftest.$ac_ext <<EOF
#line 14284 "configure"
#include "confdefs.h"

                    #include <sys/time.h>
                    #include <unistd.h>
                
int main() {

                    struct timeval tv;
                    struct timezone tz;
                    gettimeofday(&tv, &tz);
                
; return 0; }
EOF
if { (eval echo configure:14298: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  wx_cv_func_gettimeofday_has_2_args=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  cat > conftest.$ac_ext <<EOF
#line 14306 "configure"
#include "confdefs.h"

                        #include <sys/time.h>
                        #include <unistd.h>
                    
int main() {

                        struct timeval tv;
                        gettimeofday(&tv);
                    
; return 0; }
EOF
if { (eval echo configure:14319: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  wx_cv_func_gettimeofday_has_2_args=no
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  wx_cv_func_gettimeofday_has_2_args=unknown
                
fi
rm -f conftest*
            
fi
rm -f conftest*
            ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

        
fi

echo "$ac_t""$wx_cv_func_gettimeofday_has_2_args" 1>&6

        if test "$wx_cv_func_gettimeofday_has_2_args" != "yes"; then
            cat >> confdefs.h <<\EOF
#define WX_GETTIMEOFDAY_NO_TZ 1
EOF

        fi
    fi

    cat >> confdefs.h <<\EOF
#define wxUSE_TIMEDATE 1
EOF

    SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS typetest"
fi


if test "$TOOLKIT" != "MSW"; then

if test "$wxUSE_SOCKETS" = "yes"; then
        echo $ac_n "checking for socket""... $ac_c" 1>&6
echo "configure:14365: checking for socket" >&5
if eval "test \"`echo '$''{'ac_cv_func_socket'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 14370 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char socket(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char socket();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_socket) || defined (__stub___socket)
choke me
#else
socket();
#endif

; return 0; }
EOF
if { (eval echo configure:14393: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_socket=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_socket=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'socket`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  :
else
  echo "$ac_t""no" 1>&6
echo $ac_n "checking for socket in -lsocket""... $ac_c" 1>&6
echo "configure:14411: checking for socket in -lsocket" >&5
ac_lib_var=`echo socket'_'socket | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lsocket  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 14419 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char socket();

int main() {
socket()
; return 0; }
EOF
if { (eval echo configure:14430: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  INET_LINK="$INET_LINK -lsocket"
else
  echo "$ac_t""no" 1>&6

                echo "configure: warning: socket library not found - sockets will be disabled" 1>&2
                wxUSE_SOCKETS=no
            
        
fi

    
fi

fi


if test "$wxUSE_SOCKETS" = "yes" ; then
        echo $ac_n "checking what is the type of the third argument of getsockname""... $ac_c" 1>&6
echo "configure:14463: checking what is the type of the third argument of getsockname" >&5
if eval "test \"`echo '$''{'wx_cv_type_getsockname3'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
            
            ac_ext=C
# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cxx_cross


            cat > conftest.$ac_ext <<EOF
#line 14478 "configure"
#include "confdefs.h"

                    #include <sys/types.h>
                    #include <sys/socket.h>
                
int main() {

                    socklen_t len;
                    getsockname(0, 0, &len);
                
; return 0; }
EOF
if { (eval echo configure:14491: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  wx_cv_type_getsockname3=socklen_t
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  cat > conftest.$ac_ext <<EOF
#line 14499 "configure"
#include "confdefs.h"

                        #include <sys/types.h>
                        #include <sys/socket.h>
                    
int main() {

                        size_t len;
                        getsockname(0, 0, &len);
                    
; return 0; }
EOF
if { (eval echo configure:14512: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  wx_cv_type_getsockname3=size_t
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  cat > conftest.$ac_ext <<EOF
#line 14520 "configure"
#include "confdefs.h"

                            #include <sys/types.h>
                            #include <sys/socket.h>
                        
int main() {

                            int len;
                            getsockname(0, 0, &len);
                        
; return 0; }
EOF
if { (eval echo configure:14533: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  wx_cv_type_getsockname3=int
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  wx_cv_type_getsockname3=unknown
                    
fi
rm -f conftest*
                
fi
rm -f conftest*
            
fi
rm -f conftest*

            ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

        
fi

echo "$ac_t""$wx_cv_type_getsockname3" 1>&6

    if test "$wx_cv_type_getsockname3" = "unknown"; then
        wxUSE_SOCKETS=no
        echo "configure: warning: Couldn't find socklen_t synonym for this system" 1>&2
    else
        cat >> confdefs.h <<EOF
#define SOCKLEN_T $wx_cv_type_getsockname3
EOF

    fi
fi

fi

if test "$wxUSE_SOCKETS" = "yes" ; then
    cat >> confdefs.h <<\EOF
#define wxUSE_SOCKETS 1
EOF

    SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS sockets"
    INCLUDE_SUBDIRS="$INCLUDE_SUBDIRS protocol"
fi


if test "$wxUSE_GUI" = "yes"; then

if test "$TOOLKIT" != "MSW"; then

if test "$wxUSE_JOYSTICK" = "yes"; then
    for ac_hdr in linux/joystick.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:14595: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 14600 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:14605: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done

  if test "$ac_cv_header_linux_joystick_h" != "yes"; then
    wxUSE_JOYSTICK=no
    echo "configure: warning: Joystick not supported by this system" 1>&2
  fi
fi

fi

if test "$wxUSE_JOYSTICK" = "yes"; then
    cat >> confdefs.h <<\EOF
#define wxUSE_JOYSTICK 1
EOF

    SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS joytest"
fi

fi


if test "$TOOLKIT" != "MSW"; then

HAVE_DL_FUNCS=0
HAVE_SHL_FUNCS=0
if test "$wxUSE_DYNLIB_CLASS" = "yes"; then
    if test "$USE_MAC" = 1; then
                HAVE_DL_FUNCS=1
    else
                                for ac_func in dlopen
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:14661: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 14666 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:14689: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
            cat >> confdefs.h <<\EOF
#define HAVE_DLOPEN 1
EOF

            HAVE_DL_FUNCS=1
        
else
  echo "$ac_t""no" 1>&6
echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
echo "configure:14717: checking for dlopen in -ldl" >&5
ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-ldl  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 14725 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char dlopen();

int main() {
dlopen()
; return 0; }
EOF
if { (eval echo configure:14736: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  
                            cat >> confdefs.h <<\EOF
#define HAVE_DLOPEN 1
EOF

                            HAVE_DL_FUNCS=1
                            LIBS="$LIBS -ldl"
                        
else
  echo "$ac_t""no" 1>&6

                            for ac_func in shl_load
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:14765: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 14770 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:14793: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
                                            cat >> confdefs.h <<\EOF
#define HAVE_SHL_LOAD 1
EOF

                                            HAVE_SHL_FUNCS=1
                                          
else
  echo "$ac_t""no" 1>&6
echo $ac_n "checking for dld in -lshl_load""... $ac_c" 1>&6
echo "configure:14821: checking for dld in -lshl_load" >&5
ac_lib_var=`echo shl_load'_'dld | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lshl_load  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 14829 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char dld();

int main() {
dld()
; return 0; }
EOF
if { (eval echo configure:14840: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  
                                                            HAVE_SHL_FUNCS=1
                                                            LIBS="$LIBS -ldld"
                                                         
else
  echo "$ac_t""no" 1>&6
fi

                                          
fi
done

                        
fi

        
fi
done


        if test "$HAVE_DL_FUNCS" = 1; then
        for ac_func in dlerror
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:14879: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 14884 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:14907: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 cat >> confdefs.h <<\EOF
#define HAVE_DLERROR 1
EOF

else
  echo "$ac_t""no" 1>&6
echo $ac_n "checking for dlerror in -ldl""... $ac_c" 1>&6
echo "configure:14932: checking for dlerror in -ldl" >&5
ac_lib_var=`echo dl'_'dlerror | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-ldl  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 14940 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char dlerror();

int main() {
dlerror()
; return 0; }
EOF
if { (eval echo configure:14951: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  cat >> confdefs.h <<\EOF
#define HAVE_DLERROR 1
EOF

else
  echo "$ac_t""no" 1>&6
fi

fi
done

    fi
    fi

    if test "$HAVE_DL_FUNCS" = 0; then
        if test "$HAVE_SHL_FUNCS" = 0; then
          if test "$USE_UNIX" = 1; then
              echo "configure: warning: Missing dynamic loading support, several features will be disabled" 1>&2
              wxUSE_DYNLIB_CLASS=no
          else
              echo "configure: warning: Assuming wxLibrary class works on this platform" 1>&2
          fi
        fi
    fi
fi

fi

if test "$wxUSE_DYNLIB_CLASS" = "yes" ; then
    cat >> confdefs.h <<\EOF
#define wxUSE_DYNLIB_CLASS 1
EOF

else
    wxUSE_ODBC=no
    wxUSE_SERIAL=no
fi


if test "$wxUSE_UNICODE" = "yes" ; then
  cat >> confdefs.h <<\EOF
#define wxUSE_UNICODE 1
EOF

fi

if test "$wxUSE_WCSRTOMBS" = "yes" ; then
  cat >> confdefs.h <<\EOF
#define wxUSE_WCSRTOMBS 1
EOF

fi

if test "$wxUSE_wxUSE_EXPERIMENTAL_PRINTF" = "yes"; then
  cat >> confdefs.h <<\EOF
#define wxUSE_EXPERIMENTAL_PRINTF 1
EOF

fi


if test "$wxUSE_SERIAL" = "yes" ; then
    cat >> confdefs.h <<\EOF
#define wxUSE_SERIAL 1
EOF

fi


IODBC_C_SRC=""
if test "$wxUSE_ODBC" = "yes" ; then
    cat >> confdefs.h <<\EOF
#define wxUSE_ODBC 1
EOF

    WXODBCFLAG="-D_IODBC_"
    SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS db"
fi


if test "$wxUSE_POSTSCRIPT" = "yes" ; then
  cat >> confdefs.h <<\EOF
#define wxUSE_POSTSCRIPT 1
EOF

fi

cat >> confdefs.h <<\EOF
#define wxUSE_AFM_FOR_POSTSCRIPT 1
EOF


cat >> confdefs.h <<\EOF
#define wxUSE_NORMALIZED_PS_FONTS 1
EOF



if test "$wxUSE_CONSTRAINTS" = "yes"; then
    cat >> confdefs.h <<\EOF
#define wxUSE_CONSTRAINTS 1
EOF

    SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS layout"
fi

if test "$wxUSE_MDI_ARCHITECTURE" = "yes"; then
    cat >> confdefs.h <<\EOF
#define wxUSE_MDI_ARCHITECTURE 1
EOF

    SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS mdi"
fi

if test "$wxUSE_DOC_VIEW_ARCHITECTURE" = "yes" ; then
    cat >> confdefs.h <<\EOF
#define wxUSE_DOC_VIEW_ARCHITECTURE 1
EOF

    SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS docview"
    if test "$wxUSE_MDI_ARCHITECTURE" = "yes"; then
        SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS docvwmdi"
    fi
fi

if test "$wxUSE_HELP" = "yes"; then
    cat >> confdefs.h <<\EOF
#define wxUSE_HELP 1
EOF

    SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS help"
fi

if test "$wxUSE_PRINTING_ARCHITECTURE" = "yes" ; then
    if test "$wxUSE_CONSTRAINTS" != "yes"; then
        echo "configure: warning: Printing support cannot be used without constraints so it won't be compiled without it" 1>&2
    else
        cat >> confdefs.h <<\EOF
#define wxUSE_PRINTING_ARCHITECTURE 1
EOF

    fi
    SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS printing"
fi

if test "$wxUSE_PROLOGIO" = "yes" ; then
    cat >> confdefs.h <<\EOF
#define wxUSE_PROLOGIO 1
EOF

fi

if test "$wxUSE_RESOURCES" = "yes" ; then
    if test "$wxUSE_PROLOGIO" = "yes" ; then
        cat >> confdefs.h <<\EOF
#define wxUSE_RESOURCES 1
EOF

        SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS resource"
    else
        echo "configure: warning: wxWindows ressource system requires PrologIO and can't be compiled without it." 1>&2
    fi
fi

if test "$wxUSE_X_RESOURCES" = "yes"; then
    cat >> confdefs.h <<\EOF
#define wxUSE_X_RESOURCES 1
EOF

fi


if test "$wxUSE_IPC" = "yes"; then
    if test "$wxUSE_SOCKETS" != "yes"; then
        echo "configure: warning: wxWindows IPC classes require sockets" 1>&2
    fi

    cat >> confdefs.h <<\EOF
#define wxUSE_IPC 1
EOF

fi

if test "$wxUSE_CLIPBOARD" = "yes"; then
    cat >> confdefs.h <<\EOF
#define wxUSE_CLIPBOARD 1
EOF

fi

if test "$wxUSE_DRAG_AND_DROP" = "yes" ; then
    if test "$wxUSE_GTK" = 1; then
        if test "$WXGTK12" != 1; then
            echo "configure: warning: Drag and drop is only supported under GTK+ 1.2" 1>&2
            wxUSE_DRAG_AND_DROP=no
        fi
    fi

    if test "$wxUSE_MOTIF" = 1; then
        echo "configure: warning: Drag and drop is not yet supported under Motif" 1>&2
        wxUSE_DRAG_AND_DROP=no
    fi

    if test "$wxUSE_MAC" = 1; then
        echo "configure: warning: Drag and drop is not yet supported under Mac OS X" 1>&2
        wxUSE_DRAG_AND_DROP=no
    fi

    if test "$USE_WIN32" = 1; then
                
        for ac_hdr in ole2.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:15180: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 15185 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:15190: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done


	        	        if test "$ac_cv_header_ole2_h" = "yes" ; then
            if test "$GCC" = yes ; then
                ALL_OBJECTS="$ALL_OBJECTS \$(OLEOBJS)"
                ALL_DEPFILES="$ALL_DEPFILES \$(OLEDEPS)"
                CODE_GEN_FLAGS_CXX="$CODE_GEN_FLAGS_CXX -fvtable-thunks"
                LIBS="$LIBS -lole32 -luuid"

                                                if test "$wxUSE_METAFILE" = "yes"; then
                    cat >> confdefs.h <<\EOF
#define wxUSE_METAFILE 1
EOF

                                        cat >> confdefs.h <<\EOF
#define wxUSE_ENH_METAFILE 1
EOF

                fi
            fi
        else
            echo "configure: warning: Drag and drop disabled because OLE headers not found" 1>&2
            wxUSE_DRAG_AND_DROP=no
        fi
    fi

    if test "$wxUSE_DRAG_AND_DROP" = "yes"; then
        cat >> confdefs.h <<\EOF
#define wxUSE_DRAG_AND_DROP 1
EOF

        SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS dnd"
    fi

fi

if test "$wxUSE_SPLINES" = "yes" ; then
  cat >> confdefs.h <<\EOF
#define wxUSE_SPLINES 1
EOF

fi


if test "$wxUSE_ACCEL" = "yes"; then
  cat >> confdefs.h <<\EOF
#define wxUSE_ACCEL 1
EOF

fi

if test "$wxUSE_CARET" = "yes"; then
  cat >> confdefs.h <<\EOF
#define wxUSE_CARET 1
EOF

  SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS caret"
fi

if test "$wxUSE_COMBOBOX" = "yes"; then
  cat >> confdefs.h <<\EOF
#define wxUSE_COMBOBOX 1
EOF

fi

if test "$wxUSE_CHOICE" = "yes"; then
  cat >> confdefs.h <<\EOF
#define wxUSE_CHOICE 1
EOF

fi

if test "$wxUSE_BMPBUTTON" = "yes"; then
  cat >> confdefs.h <<\EOF
#define wxUSE_BMPBUTTON 1
EOF

fi

if test "$wxUSE_CHECKBOX" = "yes"; then
  cat >> confdefs.h <<\EOF
#define wxUSE_CHECKBOX 1
EOF

fi

if test "$wxUSE_CHECKLST" = "yes"; then
  cat >> confdefs.h <<\EOF
#define wxUSE_CHECKLISTBOX 1
EOF

  SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS checklst"
fi

if test "$wxUSE_GAUGE" = "yes"; then
  cat >> confdefs.h <<\EOF
#define wxUSE_GAUGE 1
EOF

fi

if test "$wxUSE_NEW_GRID" = "yes"; then
  wxUSE_GRID="yes"
  cat >> confdefs.h <<\EOF
#define wxUSE_NEW_GRID 1
EOF

  SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS newgrid"
fi

if test "$wxUSE_GRID" = "yes"; then
  cat >> confdefs.h <<\EOF
#define wxUSE_GRID 1
EOF

  SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS grid"
fi

if test "$wxUSE_IMAGLIST" = "yes"; then
    cat >> confdefs.h <<\EOF
#define wxUSE_IMAGLIST 1
EOF

fi

if test "$wxUSE_LISTBOX" = "yes"; then
    cat >> confdefs.h <<\EOF
#define wxUSE_LISTBOX 1
EOF

fi

if test "$wxUSE_LISTCTRL" = "yes"; then
    if test "$wxUSE_IMAGLIST" = "yes"; then
        cat >> confdefs.h <<\EOF
#define wxUSE_LISTCTRL 1
EOF

        SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS listctrl"
    else
        echo "configure: warning: wxListCtrl requires wxImageList and won't be compiled without it" 1>&2
    fi
fi

if test "$wxUSE_NOTEBOOK" = "yes"; then
    cat >> confdefs.h <<\EOF
#define wxUSE_NOTEBOOK 1
EOF

    SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS notebook"
fi

if test "$wxUSE_RADIOBOX" = "yes"; then
    cat >> confdefs.h <<\EOF
#define wxUSE_RADIOBOX 1
EOF

fi

if test "$wxUSE_RADIOBTN" = "yes"; then
    cat >> confdefs.h <<\EOF
#define wxUSE_RADIOBTN 1
EOF

fi

if test "$wxUSE_SASH" = "yes"; then
    cat >> confdefs.h <<\EOF
#define wxUSE_SASH 1
EOF

    SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS sashtest"
fi

if test "$wxUSE_SCROLLBAR" = "yes"; then
    cat >> confdefs.h <<\EOF
#define wxUSE_SCROLLBAR 1
EOF

    SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS scroll scrollsub"
fi

if test "$wxUSE_SLIDER" = "yes"; then
    cat >> confdefs.h <<\EOF
#define wxUSE_SLIDER 1
EOF

fi

if test "$wxUSE_SPINBTN" = "yes"; then
    cat >> confdefs.h <<\EOF
#define wxUSE_SPINBTN 1
EOF

fi

if test "$wxUSE_SPINCTRL" = "yes"; then
    cat >> confdefs.h <<\EOF
#define wxUSE_SPINCTRL 1
EOF

fi

if test "$wxUSE_SPLITTER" = "yes"; then
    cat >> confdefs.h <<\EOF
#define wxUSE_SPLITTER 1
EOF

    SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS splitter"
fi

if test "$wxUSE_STATBMP" = "yes"; then
    cat >> confdefs.h <<\EOF
#define wxUSE_STATBMP 1
EOF

fi

if test "$wxUSE_STATBOX" = "yes"; then
    cat >> confdefs.h <<\EOF
#define wxUSE_STATBOX 1
EOF

fi

if test "$wxUSE_STATLINE" = "yes"; then
    if test "$wxUSE_WINE" = 1 ; then
        echo "configure: warning: wxStaticLine is not supported under WINE" 1>&2
    else
        cat >> confdefs.h <<\EOF
#define wxUSE_STATLINE 1
EOF

    fi
fi

if test "$wxUSE_STATUSBAR" = "yes"; then
    cat >> confdefs.h <<\EOF
#define wxUSE_STATUSBAR 1
EOF


    SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS statbar"
fi

if test "$wxUSE_TABDIALOG" = "yes"; then
    cat >> confdefs.h <<\EOF
#define wxUSE_TAB_DIALOG 1
EOF

    SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS tab"
fi

if test "$wxUSE_TOGGLEBTN" = "yes"; then
  cat >> confdefs.h <<\EOF
#define wxUSE_TOGGLEBTN 1
EOF

fi

if test "$wxUSE_TOOLBAR_SIMPLE" = "yes"; then
    cat >> confdefs.h <<\EOF
#define wxUSE_TOOLBAR_SIMPLE 1
EOF

    wxUSE_TOOLBAR="yes"
fi

if test "$wxUSE_TOOLBAR" = "yes"; then
    cat >> confdefs.h <<\EOF
#define wxUSE_TOOLBAR 1
EOF


        if test "$wxUSE_TOOLBAR_SIMPLE" != "yes"; then
        wxUSE_TOOLBAR_NATIVE="yes"
    fi

    SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS toolbar"
fi

if test "$wxUSE_TOOLBAR_NATIVE" = "yes"; then
    cat >> confdefs.h <<\EOF
#define wxUSE_TOOLBAR_NATIVE 1
EOF

fi

if test "$wxUSE_TOOLTIPS" = "yes"; then
    if test "$wxUSE_MOTIF" = 1; then
        echo "configure: warning: wxTooltip not supported yet under Motif" 1>&2
    else
        if test "$wxUSE_WINE" = 1; then
            echo "configure: warning: wxTooltip not supported under WINE" 1>&2
        else
            cat >> confdefs.h <<\EOF
#define wxUSE_TOOLTIPS 1
EOF

        fi
    fi
fi

if test "$wxUSE_TREECTRL" = "yes"; then
    if test "$wxUSE_IMAGLIST" = "yes"; then
        cat >> confdefs.h <<\EOF
#define wxUSE_TREECTRL 1
EOF

        SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS treectrl"
    else
        echo "configure: warning: wxTreeCtrl requires wxImageList and won't be compiled without it" 1>&2
    fi
fi



if test "$wxUSE_DIRDLG" = "yes"; then
    if test "$wxUSE_CONSTRAINTS" != "yes"; then
       echo "configure: warning: wxDirDialog requires constraints so it won't be compiled without them" 1>&2
    else
        if test "$wxUSE_TREECTRL" != "yes"; then
            echo "configure: warning: wxDirDialog requires wxTreeCtrl so it won't be compiled without it" 1>&2
        else
            cat >> confdefs.h <<\EOF
#define wxUSE_DIRDLG 1
EOF

        fi
    fi
fi

if test "$wxUSE_TEXTDLG" = "yes"; then
    cat >> confdefs.h <<\EOF
#define wxUSE_TEXTDLG 1
EOF

fi

if test "$wxUSE_STARTUP_TIPS" = "yes"; then
    if test "$wxUSE_CONSTRAINTS" != "yes"; then
       echo "configure: warning: Startup tips requires constraints and won't be compiled without them" 1>&2
    else
        cat >> confdefs.h <<\EOF
#define wxUSE_STARTUP_TIPS 1
EOF

    fi
fi

if test "$wxUSE_PROGRESSDLG" = "yes"; then
    if test "$wxUSE_CONSTRAINTS" != "yes"; then
       echo "configure: warning: wxProgressDialog requires constraints so it won't be compiled without them" 1>&2
    else
        cat >> confdefs.h <<\EOF
#define wxUSE_PROGRESSDLG 1
EOF

    fi
fi

if test "$wxUSE_MINIFRAME" = "yes"; then
    cat >> confdefs.h <<\EOF
#define wxUSE_MINIFRAME 1
EOF

    SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS minifram"
fi

if test "$wxUSE_HTML" = "yes"; then
    cat >> confdefs.h <<\EOF
#define wxUSE_HTML 1
EOF

    SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS html"
    INCLUDE_SUBDIRS="$INCLUDE_SUBDIRS html"
fi

if test "$wxUSE_VALIDATORS" = "yes"; then
    cat >> confdefs.h <<\EOF
#define wxUSE_VALIDATORS 1
EOF

    SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS validate"
fi

if test "$wxUSE_IMAGE" = "yes" ; then
  cat >> confdefs.h <<\EOF
#define wxUSE_IMAGE 1
EOF

fi

if test "$wxUSE_GIF" = "yes" ; then
  cat >> confdefs.h <<\EOF
#define wxUSE_GIF 1
EOF

fi

if test "$wxUSE_PCX" = "yes" ; then
  cat >> confdefs.h <<\EOF
#define wxUSE_PCX 1
EOF

fi

if test "$wxUSE_PNM" = "yes" ; then
  cat >> confdefs.h <<\EOF
#define wxUSE_PNM 1
EOF

fi

if test "$wxUSE_XPM" = "yes" ; then
  cat >> confdefs.h <<\EOF
#define wxUSE_XPM 1
EOF

fi


if test "$cross_compiling" = "yes"; then
        OSINFO="\"$host\""
else
        OSINFO=`uname -s -r -m`
    OSINFO="\"$OSINFO\""
fi

cat >> confdefs.h <<EOF
#define WXWIN_OS_DESCRIPTION $OSINFO
EOF



GUILIBS="$GUI_TK_LIBRARY $TOOLKIT_LINK"
OPENGL_LIBS="$OPENGL_LINK"

EXTRA_LIBS="$LIBS $POSIX4_LINK $INET_LINK $WCHAR_LINK $THREADS_LINK $DMALLOC_LINK $DL_LINK $ZLIB_LINK -lm"
if test "$USE_MAC" = 1 ; then
    EXTRA_LIBS="$EXTRA_LIBS -framework Carbon -framework System"
fi
if test "$wxUSE_GUI" = "yes"; then
    EXTRA_LIBS="$GUILIBS $PNG_LINK $JPEG_LINK $TIFF_LINK $FREETYPE_LINK $EXTRA_LIBS"
fi

LD_LIBS="\${top_builddir}/lib/${WX_LIBRARY_NAME_STATIC} $EXTRA_LIBS"

INCLUDES="-I. -I\${top_builddir}/include -I\${top_srcdir}/include $ZLIB_INCLUDE $PNG_INCLUDE $JPEG_INCLUDE $TIFF_INCLUDE $FREETYPE_INCLUDE $TOOLKIT_INCLUDE"

if test "$wxUSE_GTK" = 1; then
    WXCONFIG_INCLUDE=""
else
    WXCONFIG_INCLUDE="$TOOLKIT_INCLUDE"
fi

if test "$GXX" = yes ; then
        CXXWARNINGS="-Wall"
        fi
EXTRA_CFLAGS="$WXDEBUG $WXODBCFLAG $PROFILE $OPTIMISE $INCLUDES"

CFLAGS=`echo $CFLAGS $EXTRA_CFLAGS $CXXWARNINGS | sed 's/ \\+/ /g'`
CXXFLAGS=`echo $CXXFLAGS $EXTRA_CFLAGS $CXXWARNINGS | sed 's/ \+/ /g'`

LDFLAGS="$LDFLAGS $PROFILE"

if test "$wxUSE_GUI" = "yes"; then
        
            SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS controls dialogs dragimag \
                     drawing dynamic event font fractal image menu \
                     minimal richedit"

        CPPFLAGS="$CPPFLAGS \$(EXTRADEFS) \$(APPEXTRADEFS)"
else
    SAMPLES_SUBDIRS=""
fi

SAMPLES_SUBDIRS="`echo $SAMPLES_SUBDIRS | tr -s ' ' | tr ' ' '\n' | sort | uniq | tr '\n' ' '| tr -d '\r'`"




























































































echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
echo "configure:15787: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftestmake <<\EOF
all:
	@echo 'ac_maketemp="${MAKE}"'
EOF
# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
if test -n "$ac_maketemp"; then
  eval ac_cv_prog_make_${ac_make}_set=yes
else
  eval ac_cv_prog_make_${ac_make}_set=no
fi
rm -f conftestmake
fi
if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  SET_MAKE=
else
  echo "$ac_t""no" 1>&6
  SET_MAKE="MAKE=${MAKE-make}"
fi


if test -d include; then
    if test -d include/wx; then
        if test -d include/wx/${TOOLKIT_DIR}; then
            if test -f include/wx/${TOOLKIT_DIR}/setup.h; then
                mv -f include/wx/${TOOLKIT_DIR}/setup.h setup.h
            fi
        fi
    fi
fi



if test "$wxUSE_GUI" = "yes"; then
            wx_cv_path_samplesubdirs=$SAMPLES_SUBDIRS
    wx_cv_path_ifs=$PATH_IFS
    wx_cv_program_ext=$PROGRAM_EXT
    wx_cv_target_library=$WX_TARGET_LIBRARY
    wx_cv_target_libtype=$WX_TARGET_LIBRARY_TYPE
    subdirs="demos samples utils contrib"

fi

trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs.  It is not useful on other systems.
# If it contains results you don't want to keep, you may remove or edit it.
#
# By default, configure uses ./config.cache as the cache file,
# creating it if it does not exist already.  You can give configure
# the --cache-file=FILE option to use a different cache file; that is
# what configure does when it calls configure scripts in
# subdirectories, so they share the cache.
# Giving --cache-file=/dev/null disables caching, for debugging configure.
# config.status only pays attention to the cache file if you give it the
# --recheck option to rerun configure.
#
EOF
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
  case `(ac_space=' '; set | grep ac_space) 2>&1` in
  *ac_space=\ *)
    # `set' does not quote correctly, so add quotes (double-quote substitution
    # turns \\\\ into \\, and sed turns \\ into \).
    sed -n \
      -e "s/'/'\\\\''/g" \
      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
    ;;
  *)
    # `set' quotes correctly as required by POSIX, so do not add quotes.
    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
    ;;
  esac >> confcache
if cmp -s $cache_file confcache; then
  :
else
  if test -w $cache_file; then
    echo "updating cache $cache_file"
    cat confcache > $cache_file
  else
    echo "not updating unwritable cache $cache_file"
  fi
fi
rm -f confcache

trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15

test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'

# Any assignment to VPATH causes Sun make to only execute
# the first set of double-colon rules, so remove it if not needed.
# If there is a colon in the path, we need to keep it.
if test "x$srcdir" = x.; then
  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
fi

trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15

DEFS=-DHAVE_CONFIG_H

# Without the "./", some shells look in PATH for config.status.
: ${CONFIG_STATUS=./config.status}

echo creating $CONFIG_STATUS
rm -f $CONFIG_STATUS
cat > $CONFIG_STATUS <<EOF
#! /bin/sh
# Generated automatically by configure.
# Run this file to recreate the current configuration.
# This directory was configured as follows,
# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
#
# $0 $ac_configure_args
#
# Compiler output produced by configure, useful for debugging
# configure, is in ./config.log if it exists.

ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
for ac_option
do
  case "\$ac_option" in
  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
    echo "$CONFIG_STATUS generated by autoconf version 2.13"
    exit 0 ;;
  -help | --help | --hel | --he | --h)
    echo "\$ac_cs_usage"; exit 0 ;;
  *) echo "\$ac_cs_usage"; exit 1 ;;
  esac
done

ac_given_srcdir=$srcdir
ac_given_INSTALL="$INSTALL"

trap 'rm -fr `echo "
            wx-config
            src/make.env
            src/makeprog.env
            src/makelib.env
            Makefile
           setup.h:setup.h.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
cat >> $CONFIG_STATUS <<EOF

# Protect against being on the right side of a sed subst in config.status.
sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
 s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
$ac_vpsub
$extrasub
s%@SHELL@%$SHELL%g
s%@CFLAGS@%$CFLAGS%g
s%@CPPFLAGS@%$CPPFLAGS%g
s%@CXXFLAGS@%$CXXFLAGS%g
s%@FFLAGS@%$FFLAGS%g
s%@DEFS@%$DEFS%g
s%@LDFLAGS@%$LDFLAGS%g
s%@LIBS@%$LIBS%g
s%@exec_prefix@%$exec_prefix%g
s%@prefix@%$prefix%g
s%@program_transform_name@%$program_transform_name%g
s%@bindir@%$bindir%g
s%@sbindir@%$sbindir%g
s%@libexecdir@%$libexecdir%g
s%@datadir@%$datadir%g
s%@sysconfdir@%$sysconfdir%g
s%@sharedstatedir@%$sharedstatedir%g
s%@localstatedir@%$localstatedir%g
s%@libdir@%$libdir%g
s%@includedir@%$includedir%g
s%@oldincludedir@%$oldincludedir%g
s%@infodir@%$infodir%g
s%@mandir@%$mandir%g
s%@host@%$host%g
s%@host_alias@%$host_alias%g
s%@host_cpu@%$host_cpu%g
s%@host_vendor@%$host_vendor%g
s%@host_os@%$host_os%g
s%@target@%$target%g
s%@target_alias@%$target_alias%g
s%@target_cpu@%$target_cpu%g
s%@target_vendor@%$target_vendor%g
s%@target_os@%$target_os%g
s%@build@%$build%g
s%@build_alias@%$build_alias%g
s%@build_cpu@%$build_cpu%g
s%@build_vendor@%$build_vendor%g
s%@build_os@%$build_os%g
s%@CC@%$CC%g
s%@CPP@%$CPP%g
s%@CXX@%$CXX%g
s%@CXXCPP@%$CXXCPP%g
s%@RANLIB@%$RANLIB%g
s%@AR@%$AR%g
s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
s%@INSTALL_DATA@%$INSTALL_DATA%g
s%@STRIP@%$STRIP%g
s%@YACC@%$YACC%g
s%@LEX@%$LEX%g
s%@LEXLIB@%$LEXLIB%g
s%@LN_S@%$LN_S%g
s%@GTK_CONFIG_2_0@%$GTK_CONFIG_2_0%g
s%@GTK_CONFIG@%$GTK_CONFIG%g
s%@GTK_CFLAGS@%$GTK_CFLAGS%g
s%@GTK_LIBS@%$GTK_LIBS%g
s%@X_CFLAGS@%$X_CFLAGS%g
s%@X_PRE_LIBS@%$X_PRE_LIBS%g
s%@X_LIBS@%$X_LIBS%g
s%@X_EXTRA_LIBS@%$X_EXTRA_LIBS%g
s%@REZ@%$REZ%g
s%@DEREZ@%$DEREZ%g
s%@LEX_STEM@%$LEX_STEM%g
s%@PATH_IFS@%$PATH_IFS%g
s%@WX_MAJOR_VERSION_NUMBER@%$WX_MAJOR_VERSION_NUMBER%g
s%@WX_MINOR_VERSION_NUMBER@%$WX_MINOR_VERSION_NUMBER%g
s%@WX_RELEASE_NUMBER@%$WX_RELEASE_NUMBER%g
s%@WX_LIBRARY_NAME@%$WX_LIBRARY_NAME%g
s%@WX_LIBRARY_NAME_STATIC@%$WX_LIBRARY_NAME_STATIC%g
s%@WX_LIBRARY_NAME_SHARED@%$WX_LIBRARY_NAME_SHARED%g
s%@WX_LIBRARY@%$WX_LIBRARY%g
s%@WX_TARGET_LIBRARY@%$WX_TARGET_LIBRARY%g
s%@WX_LIBRARY_LINK1@%$WX_LIBRARY_LINK1%g
s%@WX_LIBRARY_LINK2@%$WX_LIBRARY_LINK2%g
s%@WX_LIBRARY_LINK3@%$WX_LIBRARY_LINK3%g
s%@PROGRAM_EXT@%$PROGRAM_EXT%g
s%@WX_LIBRARY_NAME_GL@%$WX_LIBRARY_NAME_GL%g
s%@WX_LIBRARY_NAME_STATIC_GL@%$WX_LIBRARY_NAME_STATIC_GL%g
s%@WX_LIBRARY_NAME_SHARED_GL@%$WX_LIBRARY_NAME_SHARED_GL%g
s%@WX_LIBRARY_GL@%$WX_LIBRARY_GL%g
s%@WX_TARGET_LIBRARY_GL@%$WX_TARGET_LIBRARY_GL%g
s%@WX_LIBRARY_LINK1_GL@%$WX_LIBRARY_LINK1_GL%g
s%@WX_LIBRARY_LINK2_GL@%$WX_LIBRARY_LINK2_GL%g
s%@WX_LIBRARY_LINK3_GL@%$WX_LIBRARY_LINK3_GL%g
s%@WX_ALL@%$WX_ALL%g
s%@WX_ALL_INSTALLED@%$WX_ALL_INSTALLED%g
s%@SHARED_LD@%$SHARED_LD%g
s%@PIC_FLAG@%$PIC_FLAG%g
s%@DEP_INFO_FLAGS@%$DEP_INFO_FLAGS%g
s%@CODE_GEN_FLAGS@%$CODE_GEN_FLAGS%g
s%@CODE_GEN_FLAGS_CXX@%$CODE_GEN_FLAGS_CXX%g
s%@BURNT_LIBRARY_NAME@%$BURNT_LIBRARY_NAME%g
s%@BURNT_LIBRARY_NAME_GL@%$BURNT_LIBRARY_NAME_GL%g
s%@WX_TARGET_LIBRARY_SONAME@%$WX_TARGET_LIBRARY_SONAME%g
s%@WX_TARGET_LIBRARY_TYPE@%$WX_TARGET_LIBRARY_TYPE%g
s%@WXDEBUG_DEFINE@%$WXDEBUG_DEFINE%g
s%@USE_GUI@%$USE_GUI%g
s%@AFMINSTALL@%$AFMINSTALL%g
s%@TOOLKIT@%$TOOLKIT%g
s%@TOOLKIT_DEF@%$TOOLKIT_DEF%g
s%@TOOLKIT_DIR@%$TOOLKIT_DIR%g
s%@TOOLKIT_NAME@%$TOOLKIT_NAME%g
s%@TOOLKIT_INCLUDE@%$TOOLKIT_INCLUDE%g
s%@WXCONFIG_INCLUDE@%$WXCONFIG_INCLUDE%g
s%@ALL_OBJECTS@%$ALL_OBJECTS%g
s%@ALL_DEPFILES@%$ALL_DEPFILES%g
s%@GUIDIST@%$GUIDIST%g
s%@PORT_FILES@%$PORT_FILES%g
s%@DISTDIR@%$DISTDIR%g
s%@RPM_SPEC@%$RPM_SPEC%g
s%@RPM_FILES@%$RPM_FILES%g
s%@SRC_SUBDIRS@%$SRC_SUBDIRS%g
s%@INCLUDE_SUBDIRS@%$INCLUDE_SUBDIRS%g
s%@UTILS_SUBDIRS@%$UTILS_SUBDIRS%g
s%@DOCS_SUBDIRS@%$DOCS_SUBDIRS%g
s%@SAMPLES_SUBDIRS@%$SAMPLES_SUBDIRS%g
s%@USER_SUBDIRS@%$USER_SUBDIRS%g
s%@EXTRA_LIBS@%$EXTRA_LIBS%g
s%@OPENGL_LIBS@%$OPENGL_LIBS%g
s%@EXTRADEFS@%$EXTRADEFS%g
s%@LD_LIBS@%$LD_LIBS%g
s%@RCINPUTSWITCH@%$RCINPUTSWITCH%g
s%@RCOUTPUTSWITCH@%$RCOUTPUTSWITCH%g
s%@RESPROGRAM@%$RESPROGRAM%g
s%@RESCOMP@%$RESCOMP%g
s%@RESFLAGS@%$RESFLAGS%g
s%@REZFLAGS@%$REZFLAGS%g
s%@DEREZFLAGS@%$DEREZFLAGS%g
s%@LIBWXMACRES@%$LIBWXMACRES%g
s%@LIBWXMACRESCOMP@%$LIBWXMACRESCOMP%g
s%@DLLTOOL@%$DLLTOOL%g
s%@AS@%$AS%g
s%@NM@%$NM%g
s%@LD@%$LD%g
s%@MAKEINFO@%$MAKEINFO%g
s%@SET_MAKE@%$SET_MAKE%g
s%@subdirs@%$subdirs%g

CEOF
EOF

cat >> $CONFIG_STATUS <<\EOF

# Split the substitutions into bite-sized pieces for seds with
# small command number limits, like on Digital OSF/1 and HP-UX.
ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
ac_file=1 # Number of current file.
ac_beg=1 # First line for current file.
ac_end=$ac_max_sed_cmds # Line after last line for current file.
ac_more_lines=:
ac_sed_cmds=""
while $ac_more_lines; do
  if test $ac_beg -gt 1; then
    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
  else
    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
  fi
  if test ! -s conftest.s$ac_file; then
    ac_more_lines=false
    rm -f conftest.s$ac_file
  else
    if test -z "$ac_sed_cmds"; then
      ac_sed_cmds="sed -f conftest.s$ac_file"
    else
      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
    fi
    ac_file=`expr $ac_file + 1`
    ac_beg=$ac_end
    ac_end=`expr $ac_end + $ac_max_sed_cmds`
  fi
done
if test -z "$ac_sed_cmds"; then
  ac_sed_cmds=cat
fi
EOF

cat >> $CONFIG_STATUS <<EOF

CONFIG_FILES=\${CONFIG_FILES-"wx-config
            src/make.env
            src/makeprog.env
            src/makelib.env
            Makefile
          "}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
  case "$ac_file" in
  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
  *) ac_file_in="${ac_file}.in" ;;
  esac

  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.

  # Remove last slash and all that follows it.  Not all systems have dirname.
  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
    # The file is in a subdirectory.
    test ! -d "$ac_dir" && mkdir "$ac_dir"
    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
    # A "../" for each directory in $ac_dir_suffix.
    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
  else
    ac_dir_suffix= ac_dots=
  fi

  case "$ac_given_srcdir" in
  .)  srcdir=.
      if test -z "$ac_dots"; then top_srcdir=.
      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
  *) # Relative path.
    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
    top_srcdir="$ac_dots$ac_given_srcdir" ;;
  esac

  case "$ac_given_INSTALL" in
  [/$]*) INSTALL="$ac_given_INSTALL" ;;
  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
  esac

  echo creating "$ac_file"
  rm -f "$ac_file"
  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
  case "$ac_file" in
  *Makefile*) ac_comsub="1i\\
# $configure_input" ;;
  *) ac_comsub= ;;
  esac

  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
  sed -e "$ac_comsub
s%@configure_input@%$configure_input%g
s%@srcdir@%$srcdir%g
s%@top_srcdir@%$top_srcdir%g
s%@INSTALL@%$INSTALL%g
" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
fi; done
rm -f conftest.s*

# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
# NAME is the cpp macro being defined and VALUE is the value it is being given.
#
# ac_d sets the value in "#define NAME VALUE" lines.
ac_dA='s%^\([ 	]*\)#\([ 	]*define[ 	][ 	]*\)'
ac_dB='\([ 	][ 	]*\)[^ 	]*%\1#\2'
ac_dC='\3'
ac_dD='%g'
# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
ac_uA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
ac_uB='\([ 	]\)%\1#\2define\3'
ac_uC=' '
ac_uD='\4%g'
# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
ac_eA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
ac_eB='$%\1#\2define\3'
ac_eC=' '
ac_eD='%g'

if test "${CONFIG_HEADERS+set}" != set; then
EOF
cat >> $CONFIG_STATUS <<EOF
  CONFIG_HEADERS="setup.h:setup.h.in"
EOF
cat >> $CONFIG_STATUS <<\EOF
fi
for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
  case "$ac_file" in
  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
  *) ac_file_in="${ac_file}.in" ;;
  esac

  echo creating $ac_file

  rm -f conftest.frag conftest.in conftest.out
  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
  cat $ac_file_inputs > conftest.in

EOF

# Transform confdefs.h into a sed script conftest.vals that substitutes
# the proper values into config.h.in to produce config.h.  And first:
# Protect against being on the right side of a sed subst in config.status.
# Protect against being in an unquoted here document in config.status.
rm -f conftest.vals
cat > conftest.hdr <<\EOF
s/[\\&%]/\\&/g
s%[\\$`]%\\&%g
s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
s%ac_d%ac_u%gp
s%ac_u%ac_e%gp
EOF
sed -n -f conftest.hdr confdefs.h > conftest.vals
rm -f conftest.hdr

# This sed command replaces #undef with comments.  This is necessary, for
# example, in the case of _POSIX_SOURCE, which is predefined and required
# on some systems where configure will not decide to define it.
cat >> conftest.vals <<\EOF
s%^[ 	]*#[ 	]*undef[ 	][ 	]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
EOF

# Break up conftest.vals because some shells have a limit on
# the size of here documents, and old seds have small limits too.

rm -f conftest.tail
while :
do
  ac_lines=`grep -c . conftest.vals`
  # grep -c gives empty output for an empty file on some AIX systems.
  if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
  # Write a limited-size here document to conftest.frag.
  echo '  cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
  sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
  echo 'CEOF
  sed -f conftest.frag conftest.in > conftest.out
  rm -f conftest.in
  mv conftest.out conftest.in
' >> $CONFIG_STATUS
  sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
  rm -f conftest.vals
  mv conftest.tail conftest.vals
done
rm -f conftest.vals

cat >> $CONFIG_STATUS <<\EOF
  rm -f conftest.frag conftest.h
  echo "/* $ac_file.  Generated automatically by configure.  */" > conftest.h
  cat conftest.in >> conftest.h
  rm -f conftest.in
  if cmp -s $ac_file conftest.h 2>/dev/null; then
    echo "$ac_file is unchanged"
    rm -f conftest.h
  else
    # Remove last slash and all that follows it.  Not all systems have dirname.
      ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
      if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
      # The file is in a subdirectory.
      test ! -d "$ac_dir" && mkdir "$ac_dir"
    fi
    rm -f $ac_file
    mv conftest.h $ac_file
  fi
fi; done

EOF
cat >> $CONFIG_STATUS <<EOF

            TOOLKIT_DIR="${TOOLKIT_DIR}"
            TOOLKIT_NAME="${TOOLKIT_NAME}"
            LN_S="${LN_S}"
          
         
EOF
cat >> $CONFIG_STATUS <<\EOF

            chmod +x wx-config
            mv wx-config wx${TOOLKIT_NAME}-config
            ${LN_S} wx${TOOLKIT_NAME}-config wx-config

                        
            if test ! -d lib; then
              mkdir lib
            fi
            if test ! -d lib/wx; then
              mkdir lib/wx
            fi
            if test ! -d lib/wx/include; then
              mkdir lib/wx/include
            fi
            if test ! -d lib/wx/include/wx; then
              mkdir lib/wx/include/wx
            fi
            if test ! -d lib/wx/include/wx/${TOOLKIT_NAME}; then
              mkdir lib/wx/include/wx/${TOOLKIT_NAME}
            fi
            if test -f setup.h; then
                cp -fp setup.h lib/wx/include/wx/${TOOLKIT_NAME}/setup.h
            fi

            
            if test ! -d include; then
              mkdir include
            fi
            if test ! -d include/wx; then
              mkdir include/wx
            fi
            if test ! -d include/wx/${TOOLKIT_DIR}; then
              mkdir include/wx/${TOOLKIT_DIR}
            fi
            if test -f setup.h; then
                cp -fp setup.h include/wx/${TOOLKIT_DIR}/setup.h
            fi

          
exit 0
EOF
chmod +x $CONFIG_STATUS
rm -fr confdefs* $ac_clean_files
test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1

if test "$no_recursion" != yes; then

  # Remove --cache-file and --srcdir arguments so they do not pile up.
  ac_sub_configure_args=
  ac_prev=
  for ac_arg in $ac_configure_args; do
    if test -n "$ac_prev"; then
      ac_prev=
      continue
    fi
    case "$ac_arg" in
    -cache-file | --cache-file | --cache-fil | --cache-fi \
    | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
      ac_prev=cache_file ;;
    -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
    | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
      ;;
    -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
      ac_prev=srcdir ;;
    -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
      ;;
    *) ac_sub_configure_args="$ac_sub_configure_args $ac_arg" ;;
    esac
  done

  for ac_config_dir in demos samples utils contrib; do

    # Do not complain, so a configure script can configure whichever
    # parts of a large source tree are present.
    if test ! -d $srcdir/$ac_config_dir; then
      continue
    fi

    echo configuring in $ac_config_dir

    case "$srcdir" in
    .) ;;
    *)
      if test -d ./$ac_config_dir || mkdir ./$ac_config_dir; then :;
      else
        { echo "configure: error: can not create `pwd`/$ac_config_dir" 1>&2; exit 1; }
      fi
      ;;
    esac

    ac_popdir=`pwd`
    cd $ac_config_dir

      # A "../" for each directory in /$ac_config_dir.
      ac_dots=`echo $ac_config_dir|sed -e 's%^\./%%' -e 's%[^/]$%&/%' -e 's%[^/]*/%../%g'`

    case "$srcdir" in
    .) # No --srcdir option.  We are building in place.
      ac_sub_srcdir=$srcdir ;;
    /*) # Absolute path.
      ac_sub_srcdir=$srcdir/$ac_config_dir ;;
    *) # Relative path.
      ac_sub_srcdir=$ac_dots$srcdir/$ac_config_dir ;;
    esac

    # Check for guested configure; otherwise get Cygnus style configure.
    if test -f $ac_sub_srcdir/configure; then
      ac_sub_configure=$ac_sub_srcdir/configure
    elif test -f $ac_sub_srcdir/configure.in; then
      ac_sub_configure=$ac_configure
    else
      echo "configure: warning: no configuration information is in $ac_config_dir" 1>&2
      ac_sub_configure=
    fi

    # The recursion is here.
    if test -n "$ac_sub_configure"; then

      # Make the cache file name correct relative to the subdirectory.
      case "$cache_file" in
      /*) ac_sub_cache_file=$cache_file ;;
      *) # Relative path.
        ac_sub_cache_file="$ac_dots$cache_file" ;;
      esac
  case "$ac_given_INSTALL" in
        [/$]*) INSTALL="$ac_given_INSTALL" ;;
        *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
        esac

      echo "running ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir"
      # The eval makes quoting arguments work.
      if eval ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir
      then :
      else
        { echo "configure: error: $ac_sub_configure failed for $ac_config_dir" 1>&2; exit 1; }
      fi
    fi

    cd $ac_popdir
  done
fi