remove ancient SetModal(), it was deprecated long ago and is not present in wxMSW...

[wxWidgets.git] / docs / wine / install.txt

* The most simple case
-----------------------

If you compile wxWidgets on Linux for the first time and don't like to read 
install instructions just do (in the base dir):

> ./configure --with-wine
> make
> su <type root password>
> make install
> ldconfig
> exit

On all variants of Unix except Linux (and maybe except *BSD), shared libraries 
are not supported out of the box due to the utter stupidity of libtool, so you'll 
have to do this to get shared library support:

> ./configure --with-wine --disable-unicode --disable-static --enable-shared

Then you'll have to edit the wrongly created libtool script. There are two
important entries with respect to shared library creation, which are

  archive_cmds="\$LD -shared ....
  archive_expsym_cmds="\$LD -shared ....
  
which should be something like

  archive_cmds="\$CC -shared ....
  archive_expsym_cmds="\$CC -shared ....
  
Afterwards you can continue with

> make
> su <type root password>
> make install
> ldconfig
> exit

If you want to remove wxWidgets on Unix you can do this:

> su <type root password>
> make uninstall
> ldconfig
> exit

* The expert case
-----------------

If you want to do some more serious cross-platform programming with wxWidgets, 
such as for GTK and Motif, you can now build two complete libraries and use 
them concurrently. For this end, you have to create a directory for each build 
of wxWidgets - you may also want to create different versions of wxWidgets
and test them concurrently. Most typically, this would be a version configured 
with --enable-debug_flag and one without. Note, that only one build can currently 
be installed, so you'd have to use local version of the library for that purpose.
For building three versions (one GTK, one WINE and a debug version of the WINE 
source) you'd do this:

md buildmotif
cd buildmotif
../configure --with-motif
make
cd ..

md buildwine
cd buildwine
../configure --with-wine
make
cd ..

md buildwined
cd buildwined
../configure --with-wine --enable-debug_flag
make
cd ..

* The most simple errors
------------------------

wxWINE doesn't work yet as WINE isn't really up to the task yet. 

You get errors during compilation: The reason is that you probably have a broken 
compiler, which includes almost everything that is called gcc. If you use gcc 2.8 
you have to disable optimisation as the compiler will give up with an internal 
compiler error.

If there is just any way for you to use egcs, use egcs. We cannot fix gcc.

You get immediate segfault when starting any sample or application: This is either 
due to having compiled the library with different flags or options than your program - 
typically you might have the __WXDEBUG__ option set for the library but not for your 
program - or due to using a broken compiler (and its optimisation) such as GCC 2.8.

* The most simple program
-------------------------

Now create your super-application myfoo.app and compile anywhere with

g++ myfoo.cpp `wx-config --libs --cflags` -o myfoo

* General
-----------------------

The Unix variants of wxWidgets use GNU configure. If you have problems with your 
make use GNU make instead.

If you have general problems with installation, read my homepage at 

  http://wesley.informatik.uni-freiburg.de/~wxxt
  
for newest information. If you still don't have any success, please send a bug 
report to one of our mailing lists (see my homepage) INCLUDING A DESCRIPTION OF 
YOUR SYSTEM AND YOUR PROBLEM, SUCH AS YOUR VERSION OF WINE, WXWINE, WHAT DISTRIBUTION 
YOU USE AND WHAT ERROR WAS REPORTED. I know this has no effect, but I tried...

* GUI libraries
-----------------------

wxWidgets/WINE requires the WINE library to be installed on your system. 

You can get the newest version of the WINE from the WINE homepage at:

  http://www.winehq.com
  
* Create your configuration
-----------------------------

Usage:
    ./configure options

If you want to use system's C and C++ compiler,
set environment variables CC and CCC as

    % setenv CC cc
    % setenv CCC CC
    % ./configure options

to see all the options please use:

    ./configure --help

The basic philosophy is that if you want to use different
configurations, like a debug and a release version, 
or use the same source tree on different systems,
you have only to change the environment variable OSTYPE.
(Sadly this variable is not set by default on some systems
in some shells - on SGI's for example). So you will have to 
set it there. This variable HAS to be set before starting 
configure, so that it knows which system it tries to 
configure for.

Configure will complain if the system variable OSTYPE has 
not been defined. And Make in some circumstances as well...


* General options
-------------------

Given below are the commands to change the default behaviour,
i.e. if it says "--disable-threads" it means that threads
are enabled by default.

Many of the configure options have been thoroughly tested
in wxWidgets snapshot 6, but not yet all (ODBC not).

You must do this by running configure with either of:

    --with-wine              Use the WINE library
    
The following options handle the kind of library you want to build.

    --enable-threads        Compile with thread support. Threads
                            support is also required for the
                            socket code to work.

    --disable-shared        Do not create shared libraries.

    --disable-optimise        Do not optimise the code. Can
                            sometimes be useful for debugging
                            and is required on some architectures
                            such as Sun with gcc 2.8.X which
                            would otherwise produce segvs.

    --enable-profile        Add profiling info to the object 
                            files. Currently broken, I think.
                
    --enable-no_rtti        Enable compilation without creation of
                            C++ RTTI information in object files. 
                            This will speed-up compilation and reduce 
                            binary size.
                
    --enable-no_exceptions  Enable compilation without creation of
                            C++ exception information in object files. 
                            This will speed-up compilation and reduce 
                            binary size. Also fewer crashes during the
                            actual compilation...
                
    --enable-mem_tracing    Add built-in memory tracing. 
                
    --enable-dmalloc        Use the dmalloc memory debugger.
                            Read more at www.letters.com/dmalloc/
                
    --enable-debug_info     Add debug info to object files and
                            executables for use with debuggers
                            such as gdb (or its many frontends).

    --enable-debug_flag     Define __DEBUG__ and __WXDEBUG__ when
                            compiling. This enable wxWidgets' very
                            useful internal debugging tricks (such
                            as automatically reporting illegal calls)
                            to work. Note that program and library
                            must be compiled with the same debug 
                            options.

* Feature Options
-------------------

Many of the configure options have been thoroughly tested
in wxWidgets snapshot 6, but not yet all (ODBC not).

When producing an executable that is linked statically with wxGTK
you'll be surprised at its immense size. This can sometimes be
drastically reduced by removing features from wxWidgets that 
are not used in your program. The most relevant such features
are

    --without-libpng    Disables PNG image format code.
    
    --without-libjpeg    Disables JPEG image format code.
    
{   --without-odbc          Disables ODBC code. Not yet. }
    
    --disable-resources     Disables the use of *.wxr type
                            resources.
        
    --disable-threads       Disables threads. Will also
                            disable sockets.

    --disable-sockets       Disables sockets.

    --disable-dnd           Disables Drag'n'Drop.
    
    --disable-clipboard     Disables Clipboard.
    
    --disable-serial        Disables object instance serialisation.
    
    --disable-streams       Disables the wxStream classes.
    
    --disable-file          Disables the wxFile class.
    
    --disable-textfile      Disables the wxTextFile class.
    
    --disable-intl          Disables the internationalisation.
    
    --disable-validators    Disables validators.
    
    --disable-accel         Disables accel.
    
Apart from disabling certain features you can very often "strip"
the program of its debugging information resulting in a significant
reduction in size.

* Compiling
-------------

The following must be done in the base directory (e.g. ~/wxGTK
or ~/wxWin or whatever)

Now the makefiles are created (by configure) and you can compile 
the library by typing:

    make

make yourself some coffee, as it will take some time. On an old
386SX possibly two weeks. During compilation, you'll get a few 
warning messages depending in your compiler.

If you want to be more selective, you can change into a specific
directory and type "make" there.

Then you may install the library and its header files under
/usr/local/include/wx and /usr/local/lib respectively. You
have to log in as root (i.e. run "su" and enter the root
password) and type

        make install    

You can remove any traces of wxWidgets by typing

        make uninstall
    
If you want to save disk space by removing unnecessary
object-files:

     make clean

in the various directories will do the work for you.

* Creating a new Project
--------------------------

1) The first way uses the installed libraries and header files
automatically using wx-config

g++ myfoo.cpp `wx-config --libs` `wx-config --cflags` -o myfoo

Using this way, a make file for the minimal sample would look
like this

CXX = g++

minimal: minimal.o
    $(CXX) -o minimal minimal.o `wx-config --libs`

minimal.o: minimal.cpp
    $(CXX) `wx-config --cflags` -c minimal.cpp -o minimal.o

clean: 
    rm -f *.o minimal

This is certain to become the standard way unless we decide
to stick to tmake.

2) The other way creates a project within the source code 
directories of wxWidgets. For this endeavour, you'll need
the usual number of GNU tools, at least

GNU automake version 1.4
GNU autoheader version 2.14
GNU autoconf version 2.14
GNU libtool version 1.3

and quite possibly 

GNU make
GNU C++

and if you have all this then you probably know enough to
go ahead yourself :-)

----------------------

In the hope that it will be useful,

        Robert Roebling <roebling@sun2.ruf.uni-freiburg.de>
    

Addition notes by Julian Smart, August 2002
===========================================    

I've fixed some compile errors, and got as far as
compiling wxWINE, but actually linking a sample will take
further work.

To compile wxWINE, export these variables:

export CPPFLAGS=-I/usr/local/include/wine
export LDFLAGS=-L/usr/local/lib/wine

and configure with:

configure --disable-static --enable-shared --enable-gui \
 --with-wine --without-libpng --enable-debug_flag --enable-log \
 --enable-debug_info --enable-ole --enable-clipboard --enable-dataobj \
 --enable-debug --enable-threads --disable-sockets \
 --with-libjpeg --enable-debug_cntxt

Compiling a sample won't work yet because 'winebuild' needs
to be called, and the resuling C file compiled and linked.
Plus, Windows DLLs need to be imported.

Note that the documentation on the WINE web site on using
winebuild is out of date (August 2002) -- the spec file no
longer supports import and type keywords. Instead look at
samples in the WINE 'programs' directory for inspiration
and compile options to use. It's probable that the
wxWINE library will need recompiling with different options.

Any progress on this front will be very welcome.

Note that while wxWINE builds with --enable-unicode, samples
don't run. Some samples will run when built with
--disable-unicode, and others (such as auidemo) fail.