[wxWidgets.git] / wxinstall

#!/bin/sh
# N.B. make sure this really is a true Bourne-compatible shell.

# !!!! WARNING !!! THIS IS IN DEVELOPMENT AND HAS NOT BEEN
# TESTED. DO NOT USE YET!
# Use src/motif/makefile.unx directly instead, with the 'motif'
# target.

###############################################################
# wxinstal -- wxWindows for Motif installation script.        #
# Julian Smart, December 1998                                 #
# Usage: wxinstall [optional wxWindows target directory]      #
# Note: this uses plain makefiles. You can also use the       #
# configure system: see docs/motif/install.txt.               #
###############################################################

########### Edit these variables for your system. #############
########### ALSO edit wx/src/make.env once unarchived #########

# Editor
MYEDITOR=$EDITOR
if [ "$MYEDITOR" = "" ]
then
  MYEDITOR=emacs
fi

# Pager
MYPAGER=$PAGER
if [ "$MYPAGER" = "" ]
then
  MYPAGER=more
fi

# wxWindows directory to install to
WXDIR=`pwd`
if [ ! "$1" = "" ]
then
  WXDIR=$1
fi

# Target (motif, xview)
GUITARGET=motif

# Archive prefix, dependent on version number
ARCHIVE=wx200

# Platform. 1 = generic platform
PLATFORM=1

# Current directory
CURRENTDIR=`pwd`

# PostScript viewer, if any
POSTSCRIPTVIEWER=ghostview

# PostScript viewer, if any
HTMLVIEWER=netscape

# Don't change this
GUISUFFIX=_motif

if [ "$GUITARGET" = "motif" ]
then
  GUISUFFIX=_motif
fi

# If you add platforms, you just need
# to adjust this number, and
# add environment variables
# for a description and the filename.

PLATFORMCOUNT=12

PLATFORM1="Generic/Linux with gcc"
PLATFORMFILE1="linux.env"

PLATFORM2="Solaris with gcc"
PLATFORMFILE2="sol_gcc.env"

PLATFORM3="Solaris with Sun C++"
PLATFORMFILE3="sol_sun.env"

PLATFORM4="SunOS 4.x.x with gcc"
PLATFORMFILE4="sunosgcc.env"

PLATFORM5="FreeBSD with gcc"
PLATFORMFILE5="freebsd.env"

PLATFORM6="AIX with gcc"
PLATFORMFILE6="aixgcc.env"

PLATFORM7="AIX with CSet++"
PLATFORMFILE7="aixcset.env"

PLATFORM8="Data General"
PLATFORMFILE8="datagen.env"

PLATFORM9="HPUX"
PLATFORMFILE9="hp.env"

PLATFORM10="IRIX"
PLATFORMFILE10="irix.env"

PLATFORM11="DEC OSF"
PLATFORMFILE11="decosf.env"

PLATFORM12="VAX VMS"
PLATFORMFILE12="vms.env"

install_from_tar()
{
  if [ -f $CURRENTDIR/$ARCHIVE"gen.tar" ]
  then
    if [ ! -d $WXDIR ]
    then
      echo Making directory $WXDIR
      mkdir $WXDIR
    fi
    if [ ! -d $WXDIR ]
    then
      echo $WXDIR" cannot be created!"
    else
      echo Untarring $CURRENTDIR/$ARCHIVE"*.tar."
      echo Please be patient...
      cd $WXDIR
      tar xf $CURRENTDIR/$ARCHIVE"gen.tar"
      tar xf $CURRENTDIR/$ARCHIVE"mot.tar"
      echo If you saw no errors, untarring was successful.
    fi
  else
    echo $CURRENTDIR/$ARCHIVE"gen.tar" not found.
  fi

  # Unarchive HTML documentation if found
  if [ -f $CURRENTDIR/$ARCHIVE"htm.tar" ]
  then
    echo Untarring HTML documentation $CURRENTDIR/$ARCHIVE"htm.tar."
    echo Please be patient...
    cd $WXDIR
    tar xf $CURRENTDIR/$ARCHIVE"htm.tar"
  fi

  # Unarchive PDF documentation if found
  if [ -f $CURRENTDIR/$ARCHIVE"pdf.tar" ]
  then
    echo Untarring PDF documentation $CURRENTDIR/$ARCHIVE"pdf.tar."
    echo Please be patient...
    cd $WXDIR
    tar xf $CURRENTDIR/$ARCHIVE"pdf.tar"
  fi

  cd $CURRENTDIR
}

install_from_gzip()
{
  if [ -f $CURRENTDIR/$ARCHIVE"gen.tgz" ]
  then
    echo Unarchiving $CURRENTDIR/$ARCHIVE"gen.tgz"
    gzip -c -d $CURRENTDIR/$ARCHIVE"gen.tgz" | tar xf -
    echo Unarchiving $CURRENTDIR/$ARCHIVE"mot.tgz"
    gzip -c -d $CURRENTDIR/$ARCHIVE"mot.tgz" | tar xf -

    # Optional: PDF documentation
    if [ -f $CURRENTDIR/$ARCHIVE"pdf.tgz" ]
    then
      echo Unarchiving $CURRENTDIR/$ARCHIVE"ps.tgz"
      gzip -c -d $CURRENTDIR/$ARCHIVE"pdf.tgz" | tar xf -
    fi

    # Optional: HTML documentation
    if [ -f $CURRENTDIR/$ARCHIVE"htm.tgz" ]
    then
      echo Unarchiving $CURRENTDIR/$ARCHIVE"htm.tgz"
      gzip -c -d $CURRENTDIR/$ARCHIVE"htm.tgz" | tar xf -
    fi

  else
    echo $CURRENTDIR/$ARCHIVE"gen.tgz" not found. Please place in the current directory.
  fi
  cd $CURRENTDIR
}

install_from_zip()
{
  if [ -f $CURRENTDIR/$ARCHIVE"gen.zip" ]
  then
    if [ ! -d $WXDIR ]
    then
      echo Making directory $WXDIR
      mkdir $WXDIR
    fi
    if [ ! -d $WXDIR ]
    then
      echo $WXDIR" cannot be created!"
    else
      echo Untarring $CURRENTDIR/$ARCHIVE"*.zip."
      echo Please be patient...
      cd $WXDIR
      unzip -a -o $CURRENTDIR/$ARCHIVE"gen.zip"
      unzip -a -o $CURRENTDIR/$ARCHIVE"mot.zip"
      echo If you saw no errors, unzipping was successful.
    fi
  else
    echo $CURRENTDIR/$ARCHIVE"gen.zip" not found.
  fi

  # Unarchive HTML documentation if found
  if [ -f $CURRENTDIR/$ARCHIVE"htm.zip" ]
  then
    echo Unzipping HTML documentation $CURRENTDIR/$ARCHIVE"htm.zip."
    echo Please be patient...
    cd $WXDIR
    unzip -a -o $CURRENTDIR/$ARCHIVE"htm.zip"
  fi

  # Unarchive PDF documentation if found
  if [ -f $CURRENTDIR/$ARCHIVE"pdf.zip" ]
  then
    echo Unzipping PDF documentation $CURRENTDIR/$ARCHIVE"pdf.zip."
    echo Please be patient...
    cd $WXDIR
    unzip -a -o $CURRENTDIR/$ARCHIVE"pdf.zip"
  fi

  cd $CURRENTDIR
}

edit_make_env()
{
  cd $CURRENTDIR

  if [ -f $WXDIR/src/make.env ]
  then
    echo ""
    echo "If the files are unarchived ok, you should edit the file"
    echo $WXDIR"/src/make.env"
    echo "since this sets many options for your wxWindows"
    echo "compilation environment."
    echo ""
    echo "Would you like to edit the file now? (y/n)"
    echo
    read ans
    if [ "$ans" = "y" ]
    then
      $MYEDITOR $WXDIR/src/make.env
      echo ""
      echo Ok, if you get compilation or link errors in the installation,
      echo $WXDIR"/src/make.env is the first place to look."
      echo ""
      echo "Press return to continue."
      read ans
    fi
  else
    echo ""
    echo "Uh-oh, cannot find "$WXDIR"/src/make.env; probably you have not unarchived"
    echo "properly yet."
    echo ""
    echo "Press return to continue."
    read ans
  fi
}

install_from_archive()
{
  echo
  echo "Install from Archive"
  echo "--------------------"

  echo "1) Install from "$ARCHIVE"gen.zip, "$ARCHIVE"mot.zip"
  echo "   and "$ARCHIVE"htm.zip if present."
  echo "2) Install from "$ARCHIVE"gen.tgz, "$ARCHIVE"mot.tgz"
  echo "   and "$ARCHIVE"htm.tgz if present."
  echo "0) Quit."
  echo
  read archans

  if [ "$archans" = "1" ]
  then
    install_from_zip
  fi
  if [ "$archans" = "2" ]
  then
    install_from_gzip
  fi
}

make_main_library()
{
  if [ ! -d $WXDIR/src ]
  then
    echo "Source directory not found: please unarchive first."
    echo Press return to continue.
    read ans
  else
    echo
    echo Making the wxWindows main library. It will go in
    echo $WXDIR/lib.
    echo
    echo Please press RETURN to continue, and then make yourself a coffee.
    echo 
    read ans
    if [ ! -d $WXDIR/lib ]
    then
      mkdir $WXDIR/lib
    fi

    cd $WXDIR/src/motif
    make -f makefile.unx $GUITARGET 2>&1 | tee -a $CURRENTDIR/make.log
    cd $CURRENTDIR

    if [ -f $WXDIR/lib/libwx$GUISUFFIX".a" ]
    then  
      echo
      echo "If you saw no errors, wxWindows was compiled. See the file make.log"
      echo "for errors and warnings."
    else
      echo
      echo $WXDIR/lib/libwx$GUISUFFIX".a was not built."
      echo "Please check make.env, and read install.txt and faq.txt/ps."
      echo
      echo "Press return to continue."
      echo
      read ans
    fi
  fi
}

###############################################################
# Make peripheral components                                  #
###############################################################

make_wxtree()
{
  if [ ! -d $WXDIR/utils/wxtree ]
  then
    echo wxTree directory does not exist.
    echo Press return to continue.
    read ans
  else
    echo
    echo Making the wxTree library. It will go in
    echo $WXDIR/utils/wxtree/lib.
    echo
    cd $WXDIR/utils/wxtree/src
    make -f makefile.unx $GUITARGET 2>&1 | tee $CURRENTDIR/make.log
    cd $CURRENTDIR
    echo
    echo "If you saw no errors, the wxTree library was compiled. See the file make.log"
    echo "for errors and warnings."
  fi
}

make_wxgraph()
{
  if [ ! -d $WXDIR/utils/wxgraph ]
  then
    echo wxGraph directory does not exist.
    echo Press return to continue.
    read ans
  else
    echo
    echo Making the wxGraph library. It will go in
    echo $WXDIR/utils/wxgraph/lib.
    echo
    cd $WXDIR/utils/wxgraph/src
    make -f makefile.unx $GUITARGET 2>&1 | tee $CURRENTDIR/make.log
    cd $CURRENTDIR
    echo
    echo "If you saw no errors, the wxGraph library was compiled. See the file make.log"
    echo "for errors and warnings."
  fi
}

make_colour()
{
  if [ ! -d $WXDIR/utils/colours ]
  then
    echo $WXDIR/utils/colours directory does not exist.
    echo Press return to continue.
    read ans
  else
    echo
    echo Making the Colour sampler. It will go in
    echo $WXDIR/utils/colours
    echo
    cd $WXDIR/utils/colours
    make -f makefile.unx $GUITARGET 2>&1 | tee $CURRENTDIR/make.log
    cd $CURRENTDIR
    echo
    echo "If you saw no errors, the Colour sampler was compiled. See the file make.log"
    echo "for errors and warnings."
    echo ""
    if [ -f $WXDIR/utils/colours/colours$GUISUFFIX ]
    then
      echo "Run the Colour sampler? (y/n)"
      echo ""
      read ans1
      if [ "$ans1" = "y" ]
      then
        $WXDIR/utils/colours/colours$GUISUFFIX
      fi
    fi
  fi
}

make_wxhelp()
{
  if [ ! -d $WXDIR/utils/wxhelp ]
  then
    echo wxHelp directory does not exist.
    echo Press return to continue.
    read ans
  else
    echo
    echo Making the wxHelp program. It will go in
    echo $WXDIR/utils/wxhelp/src.
    echo
    cd $WXDIR/utils/wxhelp/src
    make -f makefile.unx $GUITARGET 2>&1 | tee $CURRENTDIR/make.log
    cd $CURRENTDIR
    echo
    echo "If you saw no errors, the wxHelp program was compiled. See the file make.log"
    echo "for errors and warnings."
  fi
}

make_tex2rtf()
{
  if [ ! -d $WXDIR/utils/tex2rtf ]
  then
    echo Tex2RTF directory does not exist.
    echo Press return to continue.
    read ans
  else
    echo
    echo Making the Tex2RTF utility. It will go in
    echo $WXDIR/utils/tex2rtf/src.
    echo
    cd $WXDIR/utils/tex2rtf/src
    make -f makefile.unx $GUITARGET 2>&1 | tee $CURRENTDIR/make.log
    cd $CURRENTDIR
    echo
    echo "If you saw no errors, the Tex2RTF program was compiled. See the file make.log"
    echo "for errors and warnings."
  fi
}

###############################################################
# Make samples                                                  #
###############################################################

make_controls()
{
  echo
  echo Making the Controls sample. It will be made as
  echo $WXDIR/samples/controls/controls$GUISUFFIX
  echo
  cd $WXDIR/samples/constrols
  make -f makefile.unx $GUITARGET 2>&1 | tee $CURRENTDIR/make.log
  cd $CURRENTDIR
  echo
  echo "If you saw no errors, the Controls sample was compiled. See the file make.log"
  echo "for errors and warnings."
}

make_minimal()
{
  echo
  echo Making the Minimal sample. It will be made as
  echo $WXDIR/samples/minimal/minimal$GUISUFFIX
  echo
  cd $WXDIR/samples/minimal
  make -f makefile.unx $GUITARGET 2>&1 | tee $CURRENTDIR/make.log
  cd $CURRENTDIR
  echo
  echo "If you saw no errors, the Minimal sample was compiled. See the file make.log"
  echo "for errors and warnings."
}

make_mdi()
{
  echo
  echo Making the Mdi sample. It will be made as
  echo $WXDIR/samples/mdi/mdi$GUISUFFIX
  echo
  cd $WXDIR/samples/mdi
  make -f makefile.unx $GUITARGET 2>&1 | tee $CURRENTDIR/make.log
  cd $CURRENTDIR
  echo
  echo "If you saw no errors, the MDI sample was compiled. See the file make.log"
  echo "for errors and warnings."
}

make_animate()
{
  echo
  echo Making the Animate sample. It will be made as
  echo $WXDIR/samples/animate/anim$GUISUFFIX
  echo
  cd $WXDIR/samples/animate
  make -f makefile.unx $GUITARGET 2>&1 | tee $CURRENTDIR/make.log
  cd $CURRENTDIR
  echo
  echo "If you saw no errors, the Animate sample was compiled. See the file make.log"
  echo "for errors and warnings."
}

make_fractal()
{
  echo
  echo Making the Fractal sample. It will be made as
  echo $WXDIR/samples/fractal/fractal$GUISUFFIX
  echo
  cd $WXDIR/samples/fractal
  make -f makefile.unx $GUITARGET 2>&1 | tee $CURRENTDIR/make.log
  cd $CURRENTDIR
  echo
  echo "If you saw no errors, the Fractal sample was compiled. See the file make.log"
  echo "for errors and warnings."
}

make_all_periph_components()
{
  make_wxtree
#  make_dialoged
#  make_wxgraph
#  make_wxhelp
#  make_tex2rtf
}

about_periph_components()
{
  clear
  echo "About the Peripheral Components"
  echo "-------------------------------"
  echo
  echo "These are libraries and programs that are considered useful"
  echo "enough to put in the main wxWindows distribution."
  echo
  echo wxTree A tree-drawing library, with sample
  echo ------
  echo    
#  echo wxGraph A node and arc graph-drawing library, with sample
#  echo -------
#  echo    
#  echo "Press return to continue"
#  read ans
#  clear
#  echo wxHelp The wxWindows on-line help program
#  echo ------
#  echo
#  echo
#  echo "Tex2RTF LaTeX->RTF, HTML converter"
#  echo -------
#  echo
  echo "Press return to continue"
  read ans
  clear
}

make_peripheral_components()
{
  compoption='none'
  while [ "$compoption" != "0" ]
  do
    echo
    echo "Peripheral Component Options"
    echo "----------------------------"
    echo " 1) Make wxTree layout library"
    echo "10) Make all the above"
    echo "----------------------------"
    echo " ?) About these components"
    echo "----------------------------"
    echo " 0) Quit."
    echo
    read compoption

    if [ "$compoption" = "1" ]
    then
      make_wxtree
    fi
    if [ "$compoption" = "10" ]
    then
      make_all_periph_components
    fi
    if [ "$compoption" = "?" ]
    then
      about_periph_components
    fi
  done
}

make_all_samples()
{
  echo
  echo "Note: compiling all samples is going to use up bags of disk space."
  echo "Continue? (y/n)"
  echo
  read ans

  if [ "$ans" = "y" ]
  then
    cd $WXDIR/samples
    make -f makefile.unx all$GUISUFFIX
  fi
}

make_samples()
{
  compoption='none'
  while [ "$compoption" != "0" ]
  do
    echo
    echo "Sample compilation options"
    echo "------------------------"
    echo "1) Make Minimal sample"
    echo "2) Make MDI sample
    echo "3) Make all samples"
    echo "4) Run a sample"
    echo "------------------------"
    echo "0) Quit."
    echo
    read compoption

    if [ "$compoption" = "1" ]
    then
      make_minimal
    fi
    if [ "$compoption" = "2" ]
    then
      make_mdi
    fi
    if [ "$compoption" = "3" ]
    then
      make_all_samples
    fi
    if [ "$compoption" = "4" ]
    then
      run_samples
    fi
  done
}

# Find a platform filename, using 'arg' as input and output
platform_filename()
{
  case "$arg" in
    1) arg=$PLATFORMFILE1;;
    2) arg=$PLATFORMFILE2;;
    3) arg=$PLATFORMFILE3;;
    4) arg=$PLATFORMFILE4;;
    5) arg=$PLATFORMFILE5;;
    6) arg=$PLATFORMFILE6;;
    7) arg=$PLATFORMFILE7;;
    8) arg=$PLATFORMFILE8;;
    9) arg=$PLATFORMFILE9;;
    10) arg=$PLATFORMFILE10;;
    11) arg=$PLATFORMFILE11;;
    12) arg=$PLATFORMFILE12;;
    13) arg=$PLATFORMFILE13;;
    14) arg=$PLATFORMFILE14;;
    15) arg=$PLATFORMFILE15;;
    16) arg=$PLATFORMFILE16;;
    17) arg=$PLATFORMFILE17;;
    18) arg=$PLATFORMFILE18;;
    19) arg=$PLATFORMFILE19;;
    20) arg=$PLATFORMFILE20;;
    *) arg=''
  esac
}

platform_description()
{
  case "$arg" in
    1) arg=$PLATFORM1;;
    2) arg=$PLATFORM2;;
    3) arg=$PLATFORM3;;
    4) arg=$PLATFORM4;;
    5) arg=$PLATFORM5;;
    6) arg=$PLATFORM6;;
    7) arg=$PLATFORM7;;
    8) arg=$PLATFORM8;;
    9) arg=$PLATFORM9;;
    10) arg=$PLATFORM10;;
    11) arg=$PLATFORM11;;
    12) arg=$PLATFORM12;;
    13) arg=$PLATFORM13;;
    14) arg=$PLATFORM14;;
    15) arg=$PLATFORM15;;
    16) arg=$PLATFORM16;;
    17) arg=$PLATFORM17;;
    18) arg=$PLATFORM18;;
    19) arg=$PLATFORM19;;
    20) arg=$PLATFORM20;;
    *) arg=''
  esac
}

###############################################################
# Select a platform
###############################################################

select_platform()
{
  echo
  echo "Select a platform"
  echo "----------------------------"
  echo "Note: this copies a file from $WXDIR/src/makeenvs"
  echo "to $WXDIR/src/make.env. If you have"
  echo "restarted the installation, the current option listed"
  echo "may not reflect the current make.env."
  echo
  echo "You may wish to edit a .env file in $WXDIR/src/makeenvs"
  echo "instead of src/make.env, which might be overwritten in future"
  echo "installations."
  echo
  echo "In any event, a backup of make.env is made (make.bak) before it is"
  echo "overwritten."
  echo
  echo "Please press return to continue."
  read dummy

  compoption='none'
  selectdone=0
  while [ "$selectdone" = "0" ]
  do
    echo
    echo "Select a platform"
    echo "----------------------------"
    echo

    i=1
    while [ $i -le $PLATFORMCOUNT ]
    do
      arg=$i
      platform_description
      plat=$arg
      markit=" "
      if [ "$PLATFORM" = "$i" ]
      then
        markit="*"
      fi
      echo " "$markit" "$i") "$plat
      i=`expr $i + 1`
    done
    echo
    echo "   e) Edit the current src/make.env"
    echo
    echo "Enter a choice, return for default: "
    read compoption

    if [ "$compoption" = "e" ]
    then
      $MYEDITOR $WXDIR/src/make.env
    else
      if [ "$compoption" != "" ]
      then
        arg=$compoption
        platform_description
        plat=$arg

        arg=$compoption
        platform_filename
        platfile=$arg

        if [ "$platfile" != "" ]
        then
          if [ ! -f $WXDIR"/src/makeenvs/"$platfile ]
          then
            echo "Sorry, this platform is not catered for yet."
            echo "Try using the generic settings instead."
            echo ""
            echo "Press return to continue."
            read dummy
          else
            selectdone=1
            PLATFORM=$compoption
            cp -f $WXDIR/src/make.env $WXDIR/src/make.bak
            cp -f $WXDIR/src/makeenvs/$platfile $WXDIR/src/make.env
          fi
        fi
      else
        selectdone=1
      fi
    fi
  done
}

###############################################################
# Run samples                                                   #
###############################################################

run_controls()
{
  if [ ! -f $WXDIR"/samples/controls/controls"$GUISUFFIX ]
  then
    echo The Controls sample has not been compiled yet.
  else
    echo
    echo "Running "$WXDIR"/samples/controls/controls"$GUISUFFIX
    echo
    cd $WXDIR"/samples/controls"
    "controls"$GUISUFFIX
    cd $CURRENTDIR
  fi
}

run_minimal()
{
  if [ ! -f $WXDIR"/samples/minimal/minimal"$GUISUFFIX ]
  then
    echo The Minimal sample has not been compiled yet.
  else
    echo
    echo "Running "$WXDIR"/samples/minimal/minimal"$GUISUFFIX
    echo
    cd $WXDIR"/samples/minimal"
    "minimal"$GUISUFFIX
    cd $CURRENTDIR
  fi
}

run_form()
{
  if [ ! -f $WXDIR"/samples/form/form"$GUISUFFIX ]
  then
    echo The Form sample has not been compiled yet.
  else
    echo
    echo "Running "$WXDIR"/samples/form/form"$GUISUFFIX
    echo
    cd $WXDIR"/samples/form"
    "form"$GUISUFFIX
    cd $CURRENTDIR
  fi
}

run_animate()
{
  if [ ! -f $WXDIR"/samples/animate/anim"$GUISUFFIX ]
  then
    echo The Animate sample has not been compiled yet.
  else
    echo
    echo "Running "$WXDIR"/samples/animate/anim"$GUISUFFIX
    echo
    cd $WXDIR"/samples/animate"
    "anim"$GUISUFFIX
    cd $CURRENTDIR
  fi
}

run_fractal()
{
  if [ ! -f $WXDIR"/samples/fractal/fractal"$GUISUFFIX ]
  then
    echo The Fractal sample has not been compiled yet.
  else
    echo
    echo "Running "$WXDIR"/samples/fractal/fractal"$GUISUFFIX
    echo
    cd $WXDIR"/samples/fractal"
    "fractal"$GUISUFFIX
    cd $CURRENTDIR
  fi
}

run_ipc()
{
  if [ ! -f $WXDIR"/samples/ipc/client"$GUISUFFIX ]
  then
    echo The IPC samples have not been compiled yet.
  else
    echo
    echo "Running "$WXDIR"/samples/ipc/client"$GUISUFFIX,
    echo "        "$WXDIR"/samples/ipc/server"$GUISUFFIX
    echo
    cd $WXDIR"/samples/ipc"
    echo "Starting server..."
    "server"$GUISUFFIX &
    echo "Waiting 10 seconds..."
    sleep 10
    echo "Starting client..."
    "client"$GUISUFFIX
    cd $CURRENTDIR
  fi
}

run_samples()
{
  runoption='none'
  while [ "$runoption" != "0" ]
  do
    echo
    echo "Run a wxWindows sample"
    echo "--------------------"
    echo "Note: this is a small selection. For more, please"
    echo "browse the samples subdirectory."
    echo
    echo "1) Run Minimal sample"
    echo "2) Run MDI sample"
    echo "--------------------"
    echo "0) Quit."
    echo
    read runoption

    if [ "$runoption" = "1" ]
    then
      run_minimal
    fi
    if [ "$runoption" = "2" ]
    then
      run_mdi
    fi
  done
}

make_all()
{
  make_main_library
  make_all_periph_components
  make_all_samples
}

remove_component()
{
  if [ -d $COMPONENT ]
  then
    echo "Remove "$COMPONENT": are you sure? (y/n) "
    echo
    read ans
    if [ "$ans" = "y" ]
    then
      rm -f -r $COMPONENT
    fi
  fi
}

remove_components()
{
  compoption='none'
  while [ "$compoption" != "0" ]
  do
    if [ -f $WXDIR/docs/pdf/wx.pdf ]
    then
      PDFMANUALSOK="*"
    else
      PDFMANUALSOK=" "
    fi
  
    if [ -f $WXDIR/docs/html/wx/wx.htm ]
    then
      HTMLMANUALSOK="*"
    else
      HTMLMANUALSOK=" "
    fi
  
    if [ -d $WXDIR/utils/wxtree ]
    then
      WXTREEOK="*"
    else
      WXTREEOK=" "
    fi
  
#    if [ -d $WXDIR/utils/wxgraph ]
#    then
#      WXGRAPHOK="*"
#    else
#      WXGRAPHOK=" "
#   fi
#
#    if [ -d $WXDIR/utils/wxhelp ]
#    then
#      WXHELPOK="*"
#    else
#      WXHELPOK=" "
#    fi
#
#    if [ -d $WXDIR/utils/tex2rtf ]
#    then
#      TEX2RTFOK="*"
#    else
#      TEX2RTFOK=" "
#    fi

    if [ -d $WXDIR/utils/dialoged ]
    then
      DIALOGEDOK="*"
    else
      DIALOGEDOK=" "
    fi

    echo
    echo "Remove a wxWindows component (* means it's installed)"
    echo "-----------------------------------------------------"
    echo "wxWindows currently takes up this many KB:"
    du -s $WXDIR
    echo "-----------------------------------------------------"
    echo " 1) "$PDFMANUALSOK"Remove PDF manuals"
    echo " 2) "$HTMLMANUALSOK"Remove HTML manuals"
    echo " 3) "$WXTREEOK"Remove wxTree library"
#    echo " 4) "$WXGRAPHOK"Remove wxGraph library"
#    echo " 8) "$TEX2RTFOK"Remove Tex2RTF/HTML/WinHelp/wxHelp converter"
    echo " 4) "$DIALOGEDOK"Remove Dialog Editor"
    echo "------------------------------------------------------"
    echo " 0) Quit."
    echo
    read compoption

    if [ "$compoption" = "1" ]
    then
      rm -f -r $WXDIR/pdf
    fi
    if [ "$compoption" = "2" ]
    then
      rm -f -r $WXDIR/html
    fi
    if [ "$compoption" = "3" ]
    then
      COMPONENT=$WXDIR/utils/wxtree
      remove_component
    fi
    if [ "$compoption" = "4" ]
    then
      COMPONENT=$WXDIR/utils/dialoged
      remove_component
    fi
  done
}

clean_component()
{
  if [ -d $COMPONENT ]
  then
    cd $COMPONENT
    make -f makefile.unx clean$GUISUFFIX
    cd $CURRENTDIR
  fi
}

clean_samples()
{
  cd $WXDIR/samples
  make -f makefile.unx clean$GUISUFFIX
  cd $CURRENTDIR
}

#         -f $WXDIR/samples/pressup/pressup$GUISUFFIX -o \
#         -f $WXDIR/samples/bombs/bombs$GUISUFFIX -o \
#         -f $WXDIR/samples/fractal/fractal$GUISUFFIX -o \
#         -f $WXDIR/samples/animate/anim$GUISUFFIX -o \
#         -f $WXDIR/samples/ipc/server$GUISUFFIX -o \

clean_components()
{
  compoption='none'
  olddu=""
  while [ "$compoption" != "0" ]
  do
    if [ -f $WXDIR/samples/controls/controls$GUISUFFIX -o \
         -f $WXDIR/samples/forty/forty$GUISUFFIX -o \
         -f $WXDIR/samples/splitter/splitter$GUISUFFIX -o \
         -f $WXDIR/samples/docview/docview$GUISUFFIX -o \
         -f $WXDIR/samples/wxpoem/wxpoem$GUISUFFIX -o \
         -f $WXDIR/samples/printing/printing$GUISUFFIX -o \
         -f $WXDIR/samples/resource/resource$GUISUFFIX -o \
         -f $WXDIR/samples/layout/layout$GUISUFFIX -o \
         -f $WXDIR/samples/toolbar/test$GUISUFFIX -o \
         -f $WXDIR/samples/dialogs/dialogs$GUISUFFIX -o \
         -f $WXDIR/samples/types/types$GUISUFFIX -o \
         -f $WXDIR/samples/mdi/mdi$GUISUFFIX -o \
         -f $WXDIR/samples/minimal/minimal$GUISUFFIX ]
    then
      SAMPLESOK="*"
    else
      SAMPLESOK=" "
    fi

    if [ -f $WXDIR/lib/libwx$GUISUFFIX".a" ]
    then
      WXOK="*"
    else
      WXOK=" "
    fi

    if [ -f $WXDIR/utils/tex2rtf/src/objects$GUISUFFIX/tex2rtf.o ]
    then
      TEX2RTFOK="*"
    else
      TEX2RTFOK=" "
    fi

    if [ -f $WXDIR/utils/dialoged/src/dialoged$GUISUFFIX ]
    then
      DIALOGEDOK="*"
    else
      DIALOGEDOK=" "
    fi

    echo
    echo "Cleanup a wxWindows component (* means objects/binaries exist, - means unknown)"
    echo "-----------------------------------------------------"
    echo "wxWindows currently takes up this many KB:"
    newdu=`du -s $WXDIR`
    if [ "$olddu" = "" ]
    then
      theline=$newdu
    else
      theline=$newdu" (previous usage was "$olddu")"
    fi
    echo $theline
    olddu=$newdu
    echo "-----------------------------------------------------"
    echo " 1) "$WXOK"Clean wxWindows library"
    echo " 2) "$SAMPLESOK"Clean all wxWindows samples"
    echo " 3) -Clean all utilities"
    echo " 4) "$TEX2RTFOK"Clean Tex2RTF/HTML/WinHelp/wxHelp converter"
    echo " 5) "$DIALOGEDOK"Clean Dialoged Editor tool"
    echo "------------------------------------------------------"
    echo " 0) Quit."
    echo
    read compoption

    if [ "$compoption" = "1" ]
    then
      COMPONENT=$WXDIR/src/x
      clean_component
    fi
    if [ "$compoption" = "2" ]
    then
      cd $WXDIR/samples
      make -f makefile.unx clean$GUISUFFIX
      cd $CURRENTDIR
    fi
    if [ "$compoption" = "3" ]
    then
      cd $WXDIR/utils
      make -f makefile.unx clean$GUISUFFIX
      cd $CURRENTDIR
    fi
    if [ "$compoption" = "4" ]
    then
      COMPONENT=$WXDIR/utils/tex2rtf/src
      clean_component
    fi
    if [ "$compoption" = "5" ]
    then
      COMPONENT=$WXDIR/utils/dialoged/src
      clean_component
    fi
  done
}

# Select a target
select_target()
{
  compoption='none'
  selectdone=0
  while [ "$selectdone" = "0" ]
  do
    echo
    echo "Select a target"
    echo "---------------"
    echo " 1) Motif"
    echo
    read compoption

    if [ "$compoption" = "1" ]
    then
      selectdone=1
      GUITARGET=motif
      GUISUFFIX=_motif
    fi
  done
}

# Select a target
select_dir()
{
  echo ""
  echo "Select wxWindows directory"
  echo "--------------------------"
  echo ""
  echo "Current directory: " $WXDIR
  echo ""
  echo "New directory: (return for existing value):"
  read inp
  if [ "$inp" != "" ]
  then
    WXDIR=$inp
  fi
}

### View manual ###

view_manual()
{
  if [ ! -d $WXDIR ]
  then
    echo "Sorry -- you must unarchive the distribution before you can"
    echo "look at the manual."
  else
    manoption='none'
    while [ "$manoption" != "0" ]
    do
      echo
      echo "View wxWindows documentation"
      echo "----------------------------"
      echo "1) The installation instructions, using "$MYPAGER
      echo "2) readme.txt, using "$MYPAGER
      echo "3) The change log, using "$MYPAGER
      echo "4) The HTML manual hierarchy, using $HTMLVIEWER"
      echo "--------------------"
      echo "0) Quit."
      echo
      read manoption

      if [ "$manoption" = "1" ]
      then
        if [ -f $WXDIR"/docs/motif/install.txt" ]
        then
          $MYPAGER $WXDIR/docs/motif/install.txt
        else
          if [ -f "install.txt" ]
          then
            $MYPAGER "install.txt"
          else
            if [ -f $WXDIR/"install.txt" ]
            then
              $MYPAGER $WXDIR/"install.txt"
            else
              echo
              echo "Sorry, cannot find install.txt. Perhaps you did not ftp"
              echo "it along with the archives, and/or you haven't unarchived"
              echo "the sources yet. Please press return to continue."
              echo
              read ans
            fi
          fi
        fi
      fi
      if [ "$manoption" = "2" ]
      then
        if [ -f $WXDIR"/docs/motif/readme.txt" ]
        then
          $MYPAGER $WXDIR/docs/motif/readme.txt
        else
          if [ -f "readme.txt" ]
          then
            $MYPAGER "readme.txt"
          else
            if [ -f $WXDIR/"readme.txt" ]
            then
              $MYPAGER $WXDIR/"readme.txt"
            else
              echo
              echo "Sorry, cannot find readme.txt. Perhaps you did not ftp"
              echo "it along with the archives, and/or you haven't unarchived"
              echo "the sources yet. Please press return to continue."
              echo
              read ans
            fi
          fi
        fi
      fi
      if [ "$manoption" = "3" ]
      then
        if [ -f $WXDIR"/docs/motif/changes.txt" ]
        then
          $MYPAGER $WXDIR/docs/motif/changes.txt
        else
          if [ -f "changes.txt" ]
          then
            $MYPAGER "changes.txt"
          else
            if [ -f $WXDIR/"changes.txt" ]
            then
              $MYPAGER $WXDIR/"changes.txt"
            else
              echo
              echo "Sorry, cannot find changes.txt. Perhaps you did not ftp"
              echo "it along with the archives, and/or you haven't unarchived"
              echo "the sources yet. Please press return to continue."
              echo
              read ans
            fi
          fi
        fi
      fi
      if [ "$manoption" = "4" ]
      then
          $HTMLVIEWER $WXDIR"/docs/html/index.htm"
      fi
    done
  fi
}

preliminary_notes()
{
  selectdone1=0
  ans="n"
  while [ "$ans" != "y" ]
  do
#    clear
    echo
    echo The GUI target is GUITARGET=$GUITARGET "."
    echo
    echo The directory to install to is WXDIR=$WXDIR
    echo
    arg=$PLATFORM
    platform_description
    echo The selected platform is $arg
    echo
    echo "Please check these settings carefully."
    echo "Are they correct for your system? (y/n)"
    echo

    read ans

    if [ "$ans" != "y" ]
    then
      select_target
      select_dir
      select_platform
    fi
  done

    clear
    echo ""
    echo "Configuring wxWindows"
    echo "---------------------"
    echo ""
    echo "Most makefile settings to do with compilers, platforms and"
    echo "directories are kept in "$WXDIR"/src/make.env."
    echo ""
    echo "If you get a compiler error or warning, please strongly"
    echo "suspect this file, and if necessary edit it from the first"
    echo "option on the Main Menu."
    echo ""
    echo "Some suggestions for settings are contained in make.env,"
    echo "and further information is in "$WXDIR"/install/install.txt."
    echo
    echo wxWindows itself can be tailored to remove certain features
    echo "(such as PostScript support), or select library preferences, by"
    echo "editing the file "$WXDIR"/include/wx/motif/setup.h."
    echo
    echo The setup.h defaults are probably ok for now though.
    echo
    echo "Please press return to continue."
    read ans
    echo
    clear
    echo ""
    echo "Configuring wxWindows (cont'd)"
    echo "--------------------- --------"
    echo ""
    echo "By default (at least for GNU compiler use), debugging information"
    echo "is included. This will make the libraries and binaries"
    echo "a lot bigger than if you left debugging information out."
    echo
    echo "So you might want to set DEBUG to nothing in make.env"
    echo "to disable debugging information, at least for a first look at wxWindows."
    echo
    echo "Please press return to continue."
    read ans
    echo
    clear
    echo
    echo "You may wish to choose 'View documentation' now..."
}

  ############# MAIN BIT OF THE SCRIPT #################
  clear
  echo
  echo "-------------------------------------------"
  echo "Welcome to the wxWindows 2.0 installation."
  echo "-------------------------------------------"
  echo
  echo "This script will install from the archives:"
  echo ""
  echo "  "$ARCHIVE"gen.zip, "$ARCHIVE"mot.zip"
  echo ""
  echo "and, if present, HTML and PDF archives."
  echo ""
  echo "This installation is best done from a new directory where"
  echo "wxWindows will be installed, and which contains the .zip files."
  echo "For example, ~/wx."

  select_dir

  if [ ! -f $WXDIR/src/make.env ]
  then
    install_from_archive
  fi

  preliminary_notes

  useroption='none'
  while [ "$useroption" != "0" ]
  do
    echo
    echo "wxWindows Installation Main Menu"
    echo "--------------------------------"
    echo
    echo " 1) Install from archive."
    echo " 2) Make main wxWindows library."
    echo " 3) Make a peripheral component."
    echo " 4) Make a sample."
    echo " 5) Make absolutely everything."
    echo " 6) Run a sample."
    echo " 7) View documentation."
    echo " 8) Clean objects/binaries, saving space."
    echo " 9) Remove wxWindows components from disk."
    echo "10) Edit make.env."
    echo "11) Change the selected target platform"
    echo "-----------------------------------"
    echo " 0) Exit from installation."
    echo
    read useroption

    if [ "$useroption" = "1" ]
    then
      install_from_archive
    fi
    if [ "$useroption" = "2" ]
    then
      make_main_library
    fi
    if [ "$useroption" = "3" ]
    then
      make_peripheral_components
    fi
    if [ "$useroption" = "4" ]
    then
      make_samples
    fi
    if [ "$useroption" = "5" ]
    then
      make_all
    fi
    if [ "$useroption" = "6" ]
    then
      run_samples
    fi
    if [ "$useroption" = "7" ]
    then
      view_manual
    fi
    if [ "$useroption" = "8" ]
    then
      clean_components
    fi
    if [ "$useroption" = "9" ]
    then
      remove_components
    fi
    if [ "$useroption" = "10" ]
    then
      edit_make_env
    fi
    if [ "$useroption" = "11" ]
    then
      select_platform
    fi
  done
  clear
  echo ""
  echo "Goodbye! I hope your wxWindows installation was successful."
  echo ""
  echo "You can subscribe to the mailing list wxwin-users"
  echo "for further assistance from experienced users."
  echo ""
  echo "Information is also available via the World Wide Web at:"
  echo ""
  echo "http://web.ukonline.co.uk/julian.smart/wxwin"
  echo ""
  echo "If all else fails, please contact me, Julian Smart, at:"
  echo ""
  echo "julian.smart@ukonline.co.uk"
  echo ""
  echo "If you have any suggestions, bug reports or patches,"
  echo "please email me at the above address."
  echo ""