]> git.saurik.com Git - wxWidgets.git/blame - include/wx/msw/setup0.h
[ 1590221 ] wxStandardPaths::GetExecutablePath
[wxWidgets.git] / include / wx / msw / setup0.h
CommitLineData
9bd6a503 1/////////////////////////////////////////////////////////////////////////////
b3402d0d 2// Name: wx/msw/setup.h
9bd6a503
VZ
3// Purpose: Configuration for the library
4// Author: Julian Smart
5// Modified by:
6// Created: 01/02/97
7// RCS-ID: $Id$
8// Copyright: (c) Julian Smart
65571936 9// Licence: wxWindows licence
9bd6a503
VZ
10/////////////////////////////////////////////////////////////////////////////
11
12#ifndef _WX_SETUP_H_
13#define _WX_SETUP_H_
14
24ab5c03 15/* --- start common options --- */
73974df1
VZ
16// ----------------------------------------------------------------------------
17// global settings
18// ----------------------------------------------------------------------------
9bd6a503 19
f6bcfd97
BP
20// define this to 0 when building wxBase library - this can also be done from
21// makefile/project file overriding the value here
22#ifndef wxUSE_GUI
23 #define wxUSE_GUI 1
24#endif // wxUSE_GUI
1f112209 25
6d167489
VZ
26// ----------------------------------------------------------------------------
27// compatibility settings
28// ----------------------------------------------------------------------------
29
dee1a63f 30// This setting determines the compatibility with 2.4 API: set it to 1 to
44cf9b50 31// enable it but please consider updating your code instead.
134ecc85
VZ
32//
33// Default is 0
34//
35// Recommended setting: 0 (please update your code)
dee1a63f 36#define WXWIN_COMPATIBILITY_2_4 0
134ecc85 37
dee1a63f 38// This setting determines the compatibility with 2.6 API: set it to 0 to
2b5f62a0 39// flag all cases of using deprecated functions.
874efd13 40//
134ecc85
VZ
41// Default is 1 but please try building your code with 0 as the default will
42// change to 0 in the next version and the deprecated functions will disappear
43// in the version after it completely.
874efd13 44//
2b5f62a0 45// Recommended setting: 0 (please update your code)
dee1a63f 46#define WXWIN_COMPATIBILITY_2_6 1
874efd13 47
ed6dd18a
VZ
48// MSW-only: Set to 0 for accurate dialog units, else 1 for old behaviour when
49// default system font is used for wxWindow::GetCharWidth/Height() instead of
50// the current font.
3ca6a5f0 51//
ed6dd18a 52// Default is 0
3ca6a5f0 53//
ed6dd18a
VZ
54// Recommended setting: 0
55#define wxDIALOG_UNIT_COMPATIBILITY 0
3ca6a5f0 56
3b415ba4
VZ
57// ----------------------------------------------------------------------------
58// debugging settings
59// ----------------------------------------------------------------------------
60
61// Generic comment about debugging settings: they are very useful if you don't
62// use any other memory leak detection tools such as Purify/BoundsChecker, but
63// are probably redundant otherwise. Also, Visual C++ CRT has the same features
77ffb593 64// as wxWidgets memory debugging subsystem built in since version 5.0 and you
3b415ba4
VZ
65// may prefer to use it instead of built in memory debugging code because it is
66// faster and more fool proof.
67//
68// Using VC++ CRT memory debugging is enabled by default in debug mode
69// (__WXDEBUG__) if wxUSE_GLOBAL_MEMORY_OPERATORS is *not* enabled (i.e. is 0)
70// and if __NO_VC_CRTDBG__ is not defined.
71
72// If 1, enables wxDebugContext, for writing error messages to file, etc. If
62402193 73// __WXDEBUG__ is not defined, will still use the normal memory operators.
3b415ba4 74//
62402193 75// Default is 0
3b415ba4 76//
62402193
VZ
77// Recommended setting: 0
78#define wxUSE_DEBUG_CONTEXT 0
3b415ba4
VZ
79
80// If 1, enables debugging versions of wxObject::new and wxObject::delete *IF*
81// __WXDEBUG__ is also defined.
82//
83// WARNING: this code may not work with all architectures, especially if
84// alignment is an issue. This switch is currently ignored for mingw / cygwin
85//
62402193 86// Default is 0
3b415ba4 87//
62402193
VZ
88// Recommended setting: 1 if you are not using a memory debugging tool, else 0
89#define wxUSE_MEMORY_TRACING 0
3b415ba4
VZ
90
91// In debug mode, cause new and delete to be redefined globally.
62402193
VZ
92// If this causes problems (e.g. link errors which is a common problem
93// especially if you use another library which also redefines the global new
94// and delete), set this to 0.
3b415ba4
VZ
95// This switch is currently ignored for mingw / cygwin
96//
62402193 97// Default is 0
3b415ba4 98//
62402193
VZ
99// Recommended setting: 0
100#define wxUSE_GLOBAL_MEMORY_OPERATORS 0
3b415ba4
VZ
101
102// In debug mode, causes new to be defined to be WXDEBUG_NEW (see object.h). If
103// this causes problems (e.g. link errors), set this to 0. You may need to set
104// this to 0 if using templates (at least for VC++). This switch is currently
ba14d986 105// ignored for mingw / cygwin / CodeWarrior
3b415ba4 106//
62402193 107// Default is 0
3b415ba4 108//
62402193
VZ
109// Recommended setting: 0
110#define wxUSE_DEBUG_NEW_ALWAYS 0
3b415ba4
VZ
111
112// wxHandleFatalExceptions() may be used to catch the program faults at run
113// time and, instead of terminating the program with a usual GPF message box,
114// call the user-defined wxApp::OnFatalException() function. If you set
115// wxUSE_ON_FATAL_EXCEPTION to 0, wxHandleFatalExceptions() will not work.
116//
117// This setting is for Win32 only and can only be enabled if your compiler
118// supports Win32 structured exception handling (currently only VC++ does)
119//
b39c4812 120// Default is 1
3b415ba4
VZ
121//
122// Recommended setting: 1 if your compiler supports it.
6cbe14ba 123#define wxUSE_ON_FATAL_EXCEPTION 1
3b415ba4 124
eaff0f0d 125// Set this to 1 to be able to generate a human-readable (unlike
88783bc4 126// machine-readable minidump created by wxCrashReport::Generate()) stack back
eaff0f0d
VZ
127// trace when your program crashes using wxStackWalker
128//
b39c4812 129// Default is 1 if supported by the compiler.
eaff0f0d
VZ
130//
131// Recommended setting: 1, set to 0 if your programs never crash
132#define wxUSE_STACKWALKER 1
133
36b6448c
VZ
134// Set this to 1 to compile in wxDebugReport class which allows you to create
135// and optionally upload to your web site a debug report consisting of back
136// trace of the crash (if wxUSE_STACKWALKER == 1) and other information.
137//
138// Default is 1 if supported by the compiler.
139//
0978fcb3
VZ
140// Recommended setting: 1, it is compiled into a separate library so there
141// is no overhead if you don't use it
142#define wxUSE_DEBUGREPORT 1
36b6448c 143
f6bcfd97
BP
144// ----------------------------------------------------------------------------
145// Unicode support
146// ----------------------------------------------------------------------------
147
77ffb593 148// Set wxUSE_UNICODE to 1 to compile wxWidgets in Unicode mode: wxChar will be
f6bcfd97
BP
149// defined as wchar_t, wxString will use Unicode internally. If you set this
150// to 1, you must use wxT() macro for all literal strings in the program.
151//
e74563e4
VS
152// Unicode is currently only fully supported under Windows NT/2000/XP
153// (Windows 9x doesn't support it and the programs compiled in Unicode mode
44cf9b50 154// will not run under 9x -- but see wxUSE_UNICODE_MSLU below).
f6bcfd97
BP
155//
156// Default is 0
157//
db3272a0 158// Recommended setting: 0 (unless you only plan to use Windows NT/2000/XP)
ce6cea68
VS
159#ifndef wxUSE_UNICODE
160 #define wxUSE_UNICODE 0
161#endif
f6bcfd97
BP
162
163// Setting wxUSE_WCHAR_T to 1 gives you some degree of Unicode support without
164// compiling the program in Unicode mode. More precisely, it will be possible
165// to construct wxString from a wide (Unicode) string and convert any wxString
166// to Unicode.
167//
168// Default is 1
169//
170// Recommended setting: 1
171#define wxUSE_WCHAR_T 1
172
3b415ba4
VZ
173// ----------------------------------------------------------------------------
174// global features
175// ----------------------------------------------------------------------------
176
4199367e
VZ
177// Compile library in exception-safe mode? If set to 1, the library will try to
178// behave correctly in presence of exceptions (even though it still will not
179// use the exceptions itself) and notify the user code about any unhandled
180// exceptions. If set to 0, propagation of the exceptions through the library
181// code will lead to undefined behaviour -- but the code itself will be
182// slightly smaller and faster.
183//
b39c4812
VZ
184// Note that like wxUSE_THREADS this option is automatically set to 0 if
185// wxNO_EXCEPTIONS is defined.
186//
4199367e
VZ
187// Default is 1
188//
189// Recommended setting: depends on whether you intend to use C++ exceptions
190// in your own code (1 if you do, 0 if you don't)
191#define wxUSE_EXCEPTIONS 1
192
4ef29fb5
JS
193// Set wxUSE_EXTENDED_RTTI to 1 to use extended RTTI
194//
195// Default is 0
196//
28999ba6 197// Recommended setting: 0 (this is still work in progress...)
4ef29fb5
JS
198#define wxUSE_EXTENDED_RTTI 0
199
df5168c4
MB
200// Set wxUSE_STL to 1 to derive wxList(Foo) and wxArray(Foo) from
201// std::list<Foo*> and std::vector<Foo*>, with a compatibility interface,
202// and for wxHashMap to be implemented with templates.
203//
204// Default is 0
205//
206// Recommended setting: YMMV
207#define wxUSE_STL 0
208
3b415ba4
VZ
209// Support for message/error logging. This includes wxLogXXX() functions and
210// wxLog and derived classes. Don't set this to 0 unless you really know what
211// you are doing.
212//
213// Default is 1
214//
215// Recommended setting: 1 (always)
216#define wxUSE_LOG 1
217
874efd13 218// Recommended setting: 1
dd8b2f4a
JS
219#define wxUSE_LOGWINDOW 1
220
874efd13 221// Recommended setting: 1
dd8b2f4a
JS
222#define wxUSE_LOGGUI 1
223
874efd13 224// Recommended setting: 1
3e6e2754
JS
225#define wxUSE_LOG_DIALOG 1
226
2b5f62a0
VZ
227// Support for command line parsing using wxCmdLineParser class.
228//
229// Default is 1
230//
231// Recommended setting: 1 (can be set to 0 if you don't use the cmd line)
232#define wxUSE_CMDLINE_PARSER 1
233
3b415ba4
VZ
234// Support for multithreaded applications: if 1, compile in thread classes
235// (thread.h) and make the library a bit more thread safe. Although thread
236// support is quite stable by now, you may still consider recompiling the
237// library without it if you have no use for it - this will result in a
238// somewhat smaller and faster operation.
239//
b39c4812
VZ
240// Notice that if wxNO_THREADS is defined, wxUSE_THREADS is automatically reset
241// to 0 in wx/chkconf.h, so, for example, if you set USE_THREADS to 0 in
b39c4812 242// build/msw/config.* file this value will have no effect.
3b415ba4
VZ
243//
244// Default is 1
245//
246// Recommended setting: 0 unless you do plan to develop MT applications
247#define wxUSE_THREADS 1
248
5f2c545c
VZ
249// If enabled, compiles wxWidgets streams classes
250//
251// wx stream classes are used for image IO, process IO redirection, network
252// protocols implementation and much more and so disabling this results in a
253// lot of other functionality being lost.
254//
255// Default is 1
256//
257// Recommended setting: 1 as setting it to 0 disables many other things
3b415ba4
VZ
258#define wxUSE_STREAMS 1
259
5f2c545c
VZ
260// Use standard C++ streams if 1 instead of wx streams in some places. If
261// disabled (default), wx streams are used everywhere and wxWidgets doesn't
262// depend on the standard streams library.
263//
264// Notice that enabling this does not replace wx streams with std streams
265// everywhere, in a lot of places wx streams are used no matter what.
266//
267// Default is 0
268//
269// Recommended setting: 1 if you use the standard streams anyhow and so
270// dependency on the standard streams library is not a
271// problem
3b415ba4
VZ
272#define wxUSE_STD_IOSTREAM 0
273
2bb06220 274// Enable conversion to standard C++ string if 1.
8bb9d852
MW
275//
276// Default is 1 for most compilers.
277//
278// Currently the Digital Mars and Watcom compilers come without standard C++
279// library headers by default, wxUSE_STD_STRING can be set to 1 if you do have
280// them (e.g. from STLPort).
281//
282// VC++ 5.0 does include standard C++ library header, however they produce
283// many warnings that can't be turned off when compiled at warning level 4.
284#if defined(__DMC__) || defined(__WATCOMC__) \
285 || (defined(_MSC_VER) && _MSC_VER < 1200)
286 #define wxUSE_STD_STRING 0
287#else
288 #define wxUSE_STD_STRING 1
289#endif
668d55c9 290
7a828c7f
VZ
291// Support for positional parameters (e.g. %1$d, %2$s ...) in wxVsnprintf.
292// Note that if the system's implementation does not support positional
293// parameters, setting this to 1 forces the use of the wxWidgets implementation
294// of wxVsnprintf. The standard vsnprintf() supports positional parameters on
295// many Unix systems but usually doesn't under Windows.
296//
297// Positional parameters are very useful when translating a program since using
298// them in formatting strings allow translators to correctly reorder the
299// translated sentences.
300//
301// Default is 1
302//
303// Recommended setting: 1 if you want to support multiple languages
7b4eedf6 304#define wxUSE_PRINTF_POS_PARAMS 1
7a828c7f 305
73974df1 306// ----------------------------------------------------------------------------
40973ea5 307// non GUI features selection
73974df1
VZ
308// ----------------------------------------------------------------------------
309
40973ea5
VZ
310// Set wxUSE_LONGLONG to 1 to compile the wxLongLong class. This is a 64 bit
311// integer which is implemented in terms of native 64 bit integers if any or
312// uses emulation otherwise.
313//
314// This class is required by wxDateTime and so you should enable it if you want
315// to use wxDateTime. For most modern platforms, it will use the native 64 bit
316// integers in which case (almost) all of its functions are inline and it
317// almost does not take any space, so there should be no reason to switch it
318// off.
319//
320// Recommended setting: 1
321#define wxUSE_LONGLONG 1
322
1e6feb95
VZ
323// Set wxUSE_(F)FILE to 1 to compile wx(F)File classes. wxFile uses low level
324// POSIX functions for file access, wxFFile uses ANSI C stdio.h functions.
325//
326// Default is 1
327//
328// Recommended setting: 1 (wxFile is highly recommended as it is required by
329// i18n code, wxFileConfig and others)
330#define wxUSE_FILE 1
331#define wxUSE_FFILE 1
332
05815ab3
VZ
333// Use wxFSVolume class providing access to the configured/active mount points
334//
335// Default is 1
336//
337// Recommended setting: 1 (but may be safely disabled if you don't use it)
338#define wxUSE_FSVOLUME 1
339
07158944
VZ
340// Use wxStandardPaths class which allows to retrieve some standard locations
341// in the file system
342//
343// Default is 1
344//
345// Recommended setting: 1 (may be disabled to save space, but not much)
346#define wxUSE_STDPATHS 1
347
a3a584a7
VZ
348// use wxTextBuffer class: required by wxTextFile
349#define wxUSE_TEXTBUFFER 1
350
351// use wxTextFile class: requires wxFile and wxTextBuffer, required by
352// wxFileConfig
1e6feb95
VZ
353#define wxUSE_TEXTFILE 1
354
355// i18n support: _() macro, wxLocale class. Requires wxTextFile.
356#define wxUSE_INTL 1
357
874efd13 358// Set wxUSE_DATETIME to 1 to compile the wxDateTime and related classes which
40973ea5
VZ
359// allow to manipulate dates, times and time intervals. wxDateTime replaces the
360// old wxTime and wxDate classes which are still provided for backwards
361// compatibility (and implemented in terms of wxDateTime).
362//
363// Note that this class is relatively new and is still officially in alpha
364// stage because some features are not yet (fully) implemented. It is already
365// quite useful though and should only be disabled if you are aiming at
366// absolutely minimal version of the library.
367//
368// Requires: wxUSE_LONGLONG
369//
874efd13
VZ
370// Default is 1
371//
40973ea5 372// Recommended setting: 1
e421922f
VZ
373#define wxUSE_DATETIME 1
374
1e6feb95
VZ
375// Set wxUSE_TIMER to 1 to compile wxTimer class
376//
377// Default is 1
378//
379// Recommended setting: 1
380#define wxUSE_TIMER 1
381
382// Use wxStopWatch clas.
383//
384// Default is 1
385//
386// Recommended setting: 1 (needed by wxSocket)
387#define wxUSE_STOPWATCH 1
388
16193c2b
VZ
389// Setting wxUSE_CONFIG to 1 enables the use of wxConfig and related classes
390// which allow the application to store its settings in the persistent
391// storage. Setting this to 1 will also enable on-demand creation of the
392// global config object in wxApp.
393//
394// See also wxUSE_CONFIG_NATIVE below.
395//
396// Recommended setting: 1
1e6feb95 397#define wxUSE_CONFIG 1
16193c2b
VZ
398
399// If wxUSE_CONFIG is 1, you may choose to use either the native config
400// classes under Windows (using .INI files under Win16 and the registry under
401// Win32) or the portable text file format used by the config classes under
402// Unix.
403//
404// Default is 1 to use native classes. Note that you may still use
405// wxFileConfig even if you set this to 1 - just the config object created by
406// default for the applications needs will be a wxRegConfig or wxIniConfig and
407// not wxFileConfig.
408//
409// Recommended setting: 1
410#define wxUSE_CONFIG_NATIVE 1
411
bf84b0be
VZ
412// If wxUSE_DIALUP_MANAGER is 1, compile in wxDialUpManager class which allows
413// to connect/disconnect from the network and be notified whenever the dial-up
0b9ab0bd 414// network connection is established/terminated. Requires wxUSE_DYNAMIC_LOADER.
bf84b0be
VZ
415//
416// Default is 1.
417//
418// Recommended setting: 1
106f0395 419#define wxUSE_DIALUP_MANAGER 1
bf84b0be 420
0b9ab0bd 421// Compile in classes for run-time DLL loading and function calling.
3ca6a5f0 422// Required by wxUSE_DIALUP_MANAGER.
3b415ba4
VZ
423//
424// This setting is for Win32 only
425//
426// Default is 1.
427//
428// Recommended setting: 1
466367be 429#define wxUSE_DYNLIB_CLASS 1
3b415ba4 430
466367be 431// experimental, don't use for now
abad5367 432#define wxUSE_DYNAMIC_LOADER 1
b4a5319e 433
3b415ba4
VZ
434// Set to 1 to use socket classes
435#define wxUSE_SOCKETS 1
436
3ca6a5f0 437// Set to 1 to enable virtual file systems (required by wxHTML)
3b415ba4 438#define wxUSE_FILESYSTEM 1
3ca6a5f0
BP
439
440// Set to 1 to enable virtual ZIP filesystem (requires wxUSE_FILESYSTEM)
3b415ba4 441#define wxUSE_FS_ZIP 1
3ca6a5f0 442
26e422a9
MW
443// Set to 1 to enable virtual archive filesystem (requires wxUSE_FILESYSTEM)
444#define wxUSE_FS_ARCHIVE 1
445
3ca6a5f0 446// Set to 1 to enable virtual Internet filesystem (requires wxUSE_FILESYSTEM)
3b415ba4
VZ
447#define wxUSE_FS_INET 1
448
81f90336 449// wxArchive classes for accessing archives such as zip and tar
9e8e867f 450#define wxUSE_ARCHIVE_STREAMS 1
81f90336 451
3ca6a5f0 452// Set to 1 to compile wxZipInput/OutputStream classes.
3b415ba4
VZ
453#define wxUSE_ZIPSTREAM 1
454
26e422a9
MW
455// Set to 1 to compile wxTarInput/OutputStream classes.
456#define wxUSE_TARSTREAM 1
457
3ca6a5f0 458// Set to 1 to compile wxZlibInput/OutputStream classes. Also required by
477a6238 459// wxUSE_LIBPNG
3ca6a5f0
BP
460#define wxUSE_ZLIB 1
461
3ca6a5f0
BP
462// If enabled, the code written by Apple will be used to write, in a portable
463// way, float on the disk. See extended.c for the license which is different
77ffb593 464// from wxWidgets one.
3ca6a5f0
BP
465//
466// Default is 1.
467//
468// Recommended setting: 1 unless you don't like the license terms (unlikely)
3b415ba4 469#define wxUSE_APPLE_IEEE 1
3b415ba4 470
29104849
RD
471// Joystick support class
472#define wxUSE_JOYSTICK 1
473
1e6feb95
VZ
474// wxFontMapper class
475#define wxUSE_FONTMAP 1
b9e5acef 476
1e6feb95
VZ
477// wxMimeTypesManager class
478#define wxUSE_MIMETYPE 1
29104849 479
a5d46b73
VZ
480// wxProtocol and related classes: if you want to use either of wxFTP, wxHTTP
481// or wxURL you need to set this to 1.
482//
483// Default is 1.
484//
485// Recommended setting: 1
486#define wxUSE_PROTOCOL 1
487
488// The settings for the individual URL schemes
489#define wxUSE_PROTOCOL_FILE 1
490#define wxUSE_PROTOCOL_FTP 1
491#define wxUSE_PROTOCOL_HTTP 1
492
493// Define this to use wxURL class.
494#define wxUSE_URL 1
874efd13 495
25959b95
VZ
496// Define this to use native platform url and protocol support.
497// Currently valid only for MS-Windows.
498// Note: if you set this to 1, you can open ftp/http/gopher sites
499// and obtain a valid input stream for these sites
500// even when you set wxUSE_PROTOCOL_FTP/HTTP to 0.
501// Doing so reduces the code size.
502//
503// This code is experimental and subject to change.
504#define wxUSE_URL_NATIVE 0
505
ca5c6ac3
VZ
506// Support for wxVariant class used in several places throughout the library,
507// notably in wxDataViewCtrl API.
508//
509// Default is 1.
510//
511// Recommended setting: 1 unless you want to reduce the library size as much as
512// possible in which case setting this to 0 can gain up to 100KB.
513#define wxUSE_VARIANT 1
514
874efd13
VZ
515// Support for regular expression matching via wxRegEx class: enable this to
516// use POSIX regular expressions in your code. You need to compile regex
517// library from src/regex to use it under Windows.
518//
519// Default is 0
520//
521// Recommended setting: 1 if your compiler supports it, if it doesn't please
522// contribute us a makefile for src/regex for it
5638d705 523#define wxUSE_REGEX 1
874efd13 524
a5d46b73
VZ
525// wxSystemOptions class
526#define wxUSE_SYSTEM_OPTIONS 1
527
002ed9af
VS
528// wxSound class
529#define wxUSE_SOUND 1
874efd13 530
c8a50408
RN
531// Use wxMediaCtrl
532//
533// Default is 1.
534//
912c3932 535// Recommended setting: 1
c8a50408
RN
536#define wxUSE_MEDIACTRL 1
537
dccd9b0c
RN
538// Use GStreamer for Unix (req a lot of dependancies)
539//
540// Default is 0
541//
542// Recommended setting: 1 (wxMediaCtrl won't work by default without it)
543#define wxUSE_GSTREAMER 0
544
f33cb209
RN
545// Use wxWidget's XRC XML-based resource system. Recommended.
546//
547// Default is 1
548//
84fe931d 549// Recommended setting: 1 (requires wxUSE_XML)
f33cb209
RN
550#define wxUSE_XRC 1
551
27b0c286
VS
552// XML parsing classes. Note that their API will change in the future, so
553// using wxXmlDocument and wxXmlNode in your app is not recommended.
554//
a0680daf 555// Default is the same as wxUSE_XRC, i.e. 1 by default.
27b0c286 556//
f33cb209 557// Recommended setting: 1 (required by XRC)
a0680daf 558#define wxUSE_XML wxUSE_XRC
27b0c286 559
5e4903f5
JS
560// Use wxWidget's AUI docking system
561//
562// Default is 1
563//
564// Recommended setting: 1
565#define wxUSE_AUI 1
566
f43426c1
RD
567
568// Enable the new wxGraphicsPath and wxGraphicsContext classes for an advanced
569// 2D drawing API. (Still somewhat experimental)
570//
e88f6524
RD
571// Please note that on Windows you will need to link with gdiplus.lib (use
572// USE_GDIPLUS=1 for makefile builds) and distribute gdiplus.dll with your
573// application if you want it to be runnable on pre-XP systems.
574//
f43426c1
RD
575// Default is 0
576//
577// Recommended setting: 1
e88f6524 578#ifndef wxUSE_GRAPHICS_CONTEXT
f43426c1 579#define wxUSE_GRAPHICS_CONTEXT 0
e88f6524 580#endif
f43426c1 581
bf84b0be 582// ----------------------------------------------------------------------------
1e6feb95 583// Individual GUI controls
bf84b0be
VZ
584// ----------------------------------------------------------------------------
585
1e6feb95
VZ
586// You must set wxUSE_CONTROLS to 1 if you are using any controls at all
587// (without it, wxControl class is not compiled)
588//
589// Default is 1
590//
591// Recommended setting: 1 (don't change except for very special programs)
592#define wxUSE_CONTROLS 1
593
f38bcae5
VZ
594// wxPopupWindow class is a top level transient window. It is currently used
595// to implement wxTipWindow
1e6feb95 596//
f38bcae5 597// Default is 1
1e6feb95 598//
f38bcae5
VZ
599// Recommended setting: 1 (may be set to 0 if you don't wxUSE_TIPWINDOW)
600#define wxUSE_POPUPWIN 1
601
602// wxTipWindow allows to implement the custom tooltips, it is used by the
603// context help classes. Requires wxUSE_POPUPWIN.
604//
605// Default is 1
606//
607// Recommended setting: 1 (may be set to 0)
608#define wxUSE_TIPWINDOW 1
1e6feb95 609
77ffb593 610// Each of the settings below corresponds to one wxWidgets control. They are
1e6feb95
VZ
611// all switched on by default but may be disabled if you are sure that your
612// program (including any standard dialogs it can show!) doesn't need them and
613// if you desperately want to save some space. If you use any of these you must
614// set wxUSE_CONTROLS as well.
615//
616// Default is 1
617//
618// Recommended setting: 1
72045d57 619#define wxUSE_ANIMATIONCTRL 1 // wxAnimationCtrl
17e91437
VZ
620#define wxUSE_BUTTON 1 // wxButton
621#define wxUSE_BMPBUTTON 1 // wxBitmapButton
622#define wxUSE_CALENDARCTRL 1 // wxCalendarCtrl
623#define wxUSE_CHECKBOX 1 // wxCheckBox
624#define wxUSE_CHECKLISTBOX 1 // wxCheckListBox (requires wxUSE_OWNER_DRAWN)
625#define wxUSE_CHOICE 1 // wxChoice
912c3932 626#define wxUSE_COLLPANE 1 // wxCollapsiblePane
ec376c8f 627#define wxUSE_COLOURPICKERCTRL 1 // wxColourPickerCtrl
17e91437
VZ
628#define wxUSE_COMBOBOX 1 // wxComboBox
629#define wxUSE_DATAVIEWCTRL 1 // wxDataViewCtrl
630#define wxUSE_DATEPICKCTRL 1 // wxDatePickerCtrl
ec376c8f
VZ
631#define wxUSE_DIRPICKERCTRL 1 // wxDirPickerCtrl
632#define wxUSE_FILEPICKERCTRL 1 // wxFilePickerCtrl
633#define wxUSE_FONTPICKERCTRL 1 // wxFontPickerCtrl
17e91437
VZ
634#define wxUSE_GAUGE 1 // wxGauge
635#define wxUSE_HYPERLINKCTRL 1 // wxHyperlinkCtrl
636#define wxUSE_LISTBOX 1 // wxListBox
637#define wxUSE_LISTCTRL 1 // wxListCtrl
638#define wxUSE_RADIOBOX 1 // wxRadioBox
639#define wxUSE_RADIOBTN 1 // wxRadioButton
640#define wxUSE_SCROLLBAR 1 // wxScrollBar
641#define wxUSE_SLIDER 1 // wxSlider
642#define wxUSE_SPINBTN 1 // wxSpinButton
643#define wxUSE_SPINCTRL 1 // wxSpinCtrl
644#define wxUSE_STATBOX 1 // wxStaticBox
645#define wxUSE_STATLINE 1 // wxStaticLine
646#define wxUSE_STATTEXT 1 // wxStaticText
647#define wxUSE_STATBMP 1 // wxStaticBitmap
648#define wxUSE_TEXTCTRL 1 // wxTextCtrl
649#define wxUSE_TOGGLEBTN 1 // requires wxButton
650#define wxUSE_TREECTRL 1 // wxTreeCtrl
1e6feb95
VZ
651
652// Use a status bar class? Depending on the value of wxUSE_NATIVE_STATUSBAR
653// below either wxStatusBar95 or a generic wxStatusBar will be used.
654//
655// Default is 1
656//
657// Recommended setting: 1
658#define wxUSE_STATUSBAR 1
659
660// Two status bar implementations are available under Win32: the generic one
661// or the wrapper around native control. For native look and feel the native
662// version should be used.
663//
c67b4daf 664// Default is 1 for the platforms where native status bar is supported.
1e6feb95
VZ
665//
666// Recommended setting: 1 (there is no advantage in using the generic one)
667#define wxUSE_NATIVE_STATUSBAR 1
668
bf84b0be
VZ
669// wxToolBar related settings: if wxUSE_TOOLBAR is 0, don't compile any toolbar
670// classes at all. Otherwise, use the native toolbar class unless
8a82c9ec 671// wxUSE_TOOLBAR_NATIVE is 0.
bf84b0be
VZ
672//
673// Default is 1 for all settings.
674//
8a82c9ec 675// Recommended setting: 1 for wxUSE_TOOLBAR and wxUSE_TOOLBAR_NATIVE.
bf84b0be
VZ
676#define wxUSE_TOOLBAR 1
677#define wxUSE_TOOLBAR_NATIVE 1
bf84b0be 678
b3402d0d 679// wxNotebook is a control with several "tabs" located on one of its sides. It
95ae6d5f 680// may be used to logically organise the data presented to the user instead of
b3402d0d
VZ
681// putting everything in one huge dialog. It replaces wxTabControl and related
682// classes of wxWin 1.6x.
683//
684// Default is 1.
685//
686// Recommended setting: 1
687#define wxUSE_NOTEBOOK 1
688
e9c0df38
VZ
689// wxListbook control is similar to wxNotebook but uses wxListCtrl instead of
690// the tabs
691//
692// Default is 1.
693//
694// Recommended setting: 1
695#define wxUSE_LISTBOOK 1
696
f5e0b4bc
WS
697// wxChoicebook control is similar to wxNotebook but uses wxChoice instead of
698// the tabs
699//
700// Default is 1.
701//
702// Recommended setting: 1
703#define wxUSE_CHOICEBOOK 1
704
eca15c0d
VZ
705// wxTreebook control is similar to wxNotebook but uses wxTreeCtrl instead of
706// the tabs
707//
708// Default is 1.
709//
710// Recommended setting: 1
711#define wxUSE_TREEBOOK 1
712
f4edf138
JS
713// wxToolbook control is similar to wxNotebook but uses wxToolBar instead of
714// tabs
715//
716// Default is 1.
717//
718// Recommended setting: 1
719#define wxUSE_TOOLBOOK 1
720
1e6feb95
VZ
721// wxTabDialog is a generic version of wxNotebook but it is incompatible with
722// the new class. It shouldn't be used in new code.
3b415ba4 723//
1e6feb95 724// Default is 0.
3b415ba4 725//
1e6feb95
VZ
726// Recommended setting: 0 (use wxNotebook)
727#define wxUSE_TAB_DIALOG 0
ff2d113e 728
dd74a7ad 729// wxGrid class
ff2d113e 730//
c67b4daf
VZ
731// Default is 1, set to 0 to cut down compilation time and binaries size if you
732// don't use it.
ff2d113e 733//
dd74a7ad 734// Recommended setting: 1
9c824f29 735//
ff2d113e 736#define wxUSE_GRID 1
b3402d0d 737
c67b4daf
VZ
738// wxMiniFrame class: a frame with narrow title bar
739//
740// Default is 1.
741//
742// Recommended setting: 1 (it doesn't cost almost anything)
743#define wxUSE_MINIFRAME 1
744
a57d600f 745// wxComboCtrl and related classes: combobox with custom popup window and
21849f3a
VZ
746// not necessarily a listbox.
747//
748// Default is 1.
749//
750// Recommended setting: 1 but can be safely set to 0 except for wxUniv where it
751// it used by wxComboBox
a57d600f 752#define wxUSE_COMBOCTRL 1
21849f3a
VZ
753
754// wxOwnerDrawnComboBox is a custom combobox allowing to paint the combobox
755// items.
756//
757// Default is 1.
758//
95a46303
RR
759// Recommended setting: 1 but can be safely set to 0, except where it is
760// needed as a base class for generic wxBitmapComboBox.
a57d600f 761#define wxUSE_ODCOMBOBOX 1
21849f3a 762
95a46303
RR
763// wxBitmapComboBox is a combobox that can have images in front of text items.
764//
765// Default is 1.
766//
767// Recommended setting: 1 but can be safely set to 0
768#define wxUSE_BITMAPCOMBOBOX 1
769
1e6feb95
VZ
770// ----------------------------------------------------------------------------
771// Miscellaneous GUI stuff
772// ----------------------------------------------------------------------------
3b415ba4
VZ
773
774// wxAcceleratorTable/Entry classes and support for them in wxMenu(Bar)
775#define wxUSE_ACCEL 1
776
5048c832
JS
777// Hotkey support (currently Windows only)
778#define wxUSE_HOTKEY 1
779
1e6feb95
VZ
780// Use wxCaret: a class implementing a "cursor" in a text control (called caret
781// under Windows).
782//
783// Default is 1.
784//
785// Recommended setting: 1 (can be safely set to 0, not used by the library)
786#define wxUSE_CARET 1
787
8a09029e 788// Use wxDisplay class: it allows enumerating all displays on a system and
5f2c545c
VZ
789// their geometries as well as finding the display on which the given point or
790// window lies.
8a09029e 791//
5f2c545c 792// Default is 1.
8a09029e
VZ
793//
794// Recommended setting: 1 if you need it, can be safely set to 0 otherwise
01c54165 795#define wxUSE_DISPLAY 1
8a09029e 796
1e6feb95
VZ
797// Miscellaneous geometry code: needed for Canvas library
798#define wxUSE_GEOMETRY 1
799
800// Use wxImageList. This class is needed by wxNotebook, wxTreeCtrl and
801// wxListCtrl.
802//
803// Default is 1.
804//
805// Recommended setting: 1 (set it to 0 if you don't use any of the controls
806// enumerated above, then this class is mostly useless too)
807#define wxUSE_IMAGLIST 1
808
809// Use wxMenu, wxMenuBar, wxMenuItem.
810//
811// Default is 1.
812//
813// Recommended setting: 1 (can't be disabled under MSW)
814#define wxUSE_MENUS 1
815
816// Use wxSashWindow class.
817//
818// Default is 1.
819//
820// Recommended setting: 1
821#define wxUSE_SASH 1
822
823// Use wxSplitterWindow class.
824//
825// Default is 1.
826//
827// Recommended setting: 1
828#define wxUSE_SPLITTER 1
829
830// Use wxToolTip and wxWindow::Set/GetToolTip() methods.
831//
832// Default is 1.
833//
834// Recommended setting: 1
835#define wxUSE_TOOLTIPS 1
836
837// wxValidator class and related methods
838#define wxUSE_VALIDATORS 1
839
3b415ba4
VZ
840// ----------------------------------------------------------------------------
841// common dialogs
842// ----------------------------------------------------------------------------
843
3b415ba4
VZ
844// On rare occasions (e.g. using DJGPP) may want to omit common dialogs (e.g.
845// file selector, printer dialog). Switching this off also switches off the
846// printing architecture and interactive wxPrinterDC.
847//
848// Default is 1
849//
850// Recommended setting: 1 (unless it really doesn't work)
851#define wxUSE_COMMON_DIALOGS 1
852
874efd13
VZ
853// wxBusyInfo displays window with message when app is busy. Works in same way
854// as wxBusyCursor
855#define wxUSE_BUSYINFO 1
856
857// Use single/multiple choice dialogs.
858//
859// Default is 1
860//
861// Recommended setting: 1 (used in the library itself)
862#define wxUSE_CHOICEDLG 1
863
864// Use colour picker dialog
865//
866// Default is 1
867//
868// Recommended setting: 1
869#define wxUSE_COLOURDLG 1
870
871// wxDirDlg class for getting a directory name from user
872#define wxUSE_DIRDLG 1
873
874// TODO: setting to choose the generic or native one
875
1e6feb95
VZ
876// Use file open/save dialogs.
877//
878// Default is 1
879//
880// Recommended setting: 1 (used in many places in the library itself)
881#define wxUSE_FILEDLG 1
882
874efd13
VZ
883// Use find/replace dialogs.
884//
885// Default is 1
886//
887// Recommended setting: 1 (but may be safely set to 0)
baff4ae2
VZ
888#define wxUSE_FINDREPLDLG 1
889
1e6feb95
VZ
890// Use font picker dialog
891//
892// Default is 1
893//
894// Recommended setting: 1 (used in the library itself)
895#define wxUSE_FONTDLG 1
896
e421922f 897// Use wxMessageDialog and wxMessageBox.
1e6feb95
VZ
898//
899// Default is 1
900//
901// Recommended setting: 1 (used in the library itself)
e421922f 902#define wxUSE_MSGDLG 1
3b415ba4 903
874efd13
VZ
904// progress dialog class for lengthy operations
905#define wxUSE_PROGRESSDLG 1
3b415ba4 906
874efd13
VZ
907// support for startup tips (wxShowTip &c)
908#define wxUSE_STARTUP_TIPS 1
3b415ba4 909
e421922f
VZ
910// text entry dialog and wxGetTextFromUser function
911#define wxUSE_TEXTDLG 1
912
874efd13 913// number entry dialog
ff8b6290
JS
914#define wxUSE_NUMBERDLG 1
915
874efd13
VZ
916// splash screen class
917#define wxUSE_SPLASH 1
47606d36 918
874efd13 919// wizards
b1f5d087
VZ
920#define wxUSE_WIZARDDLG 1
921
9211cf3c
VZ
922// Compile in wxAboutBox() function showing the standard "About" dialog.
923//
924// Default is 1
925//
926// Recommended setting: 1 but can be set to 0 to save some space if you don't
927// use this function
928#define wxUSE_ABOUTDLG 1
929
d9317fd4
VZ
930// ----------------------------------------------------------------------------
931// Metafiles support
932// ----------------------------------------------------------------------------
933
934// Windows supports the graphics format known as metafile which is, though not
935// portable, is widely used under Windows and so is supported by wxWin (under
936// Windows only, of course). Win16 (Win3.1) used the so-called "Window
937// MetaFiles" or WMFs which were replaced with "Enhanced MetaFiles" or EMFs in
938// Win32 (Win9x, NT, 2000). Both of these are supported in wxWin and, by
939// default, WMFs will be used under Win16 and EMFs under Win32. This may be
940// changed by setting wxUSE_WIN_METAFILES_ALWAYS to 1 and/or setting
941// wxUSE_ENH_METAFILE to 0. You may also set wxUSE_METAFILE to 0 to not compile
942// in any metafile related classes at all.
943//
944// Default is 1 for wxUSE_ENH_METAFILE and 0 for wxUSE_WIN_METAFILES_ALWAYS.
945//
946// Recommended setting: default or 0 for everything for portable programs.
947#define wxUSE_METAFILE 1
948#define wxUSE_ENH_METAFILE 1
949#define wxUSE_WIN_METAFILES_ALWAYS 0
950
ff2d113e
VZ
951// ----------------------------------------------------------------------------
952// Big GUI components
953// ----------------------------------------------------------------------------
954
efd17a1d
VZ
955// Set to 0 to disable MDI support.
956//
957// Requires wxUSE_NOTEBOOK under platforms other than MSW.
958//
959// Default is 1.
960//
961// Recommended setting: 1, can be safely set to 0.
962#define wxUSE_MDI 1
963
3b415ba4
VZ
964// Set to 0 to disable document/view architecture
965#define wxUSE_DOC_VIEW_ARCHITECTURE 1
966
967// Set to 0 to disable MDI document/view architecture
efd17a1d
VZ
968//
969// Requires wxUSE_MDI && wxUSE_DOC_VIEW_ARCHITECTURE
3b415ba4
VZ
970#define wxUSE_MDI_ARCHITECTURE 1
971
972// Set to 0 to disable print/preview architecture code
973#define wxUSE_PRINTING_ARCHITECTURE 1
974
ff2d113e
VZ
975// wxHTML sublibrary allows to display HTML in wxWindow programs and much,
976// much more.
977//
978// Default is 1.
979//
980// Recommended setting: 1 (wxHTML is great!), set to 0 if you want compile a
981// smaller library.
982#define wxUSE_HTML 1
983
2b5f62a0
VZ
984// Setting wxUSE_GLCANVAS to 1 enables OpenGL support. You need to have OpenGL
985// headers and libraries to be able to compile the library with wxUSE_GLCANVAS
986// set to 1. Note that for some compilers (notably Microsoft Visual C++) you
987// will need to manually add opengl32.lib and glu32.lib to the list of
988// libraries linked with your program if you use OpenGL.
989//
990// Default is 0.
991//
992// Recommended setting: 1 if you intend to use OpenGL, 0 otherwise
8b089c5e
JS
993#define wxUSE_GLCANVAS 0
994
5d7836c4
JS
995// wxRichTextCtrl allows editing of styled text.
996//
997// Default is 1.
998//
999// Recommended setting: 1, set to 0 if you want compile a
1000// smaller library.
1001#define wxUSE_RICHTEXT 1
1002
1e6feb95
VZ
1003// ----------------------------------------------------------------------------
1004// Data transfer
1005// ----------------------------------------------------------------------------
1006
1007// Use wxClipboard class for clipboard copy/paste.
1008//
1009// Default is 1.
1010//
1011// Recommended setting: 1
1012#define wxUSE_CLIPBOARD 1
1013
1014// Use wxDataObject and related classes. Needed for clipboard and OLE drag and
1015// drop
1016//
1017// Default is 1.
1018//
1019// Recommended setting: 1
1020#define wxUSE_DATAOBJ 1
1021
1022// Use wxDropTarget and wxDropSource classes for drag and drop (this is
1023// different from "built in" drag and drop in wxTreeCtrl which is always
1024// available). Requires wxUSE_DATAOBJ.
1025//
1026// Default is 1.
1027//
1028// Recommended setting: 1
1029#define wxUSE_DRAG_AND_DROP 1
1030
45a959a3
JS
1031// Use wxAccessible for enhanced and customisable accessibility.
1032// Depends on wxUSE_OLE.
1033//
1034// Default is 0.
1035//
1036// Recommended setting (at present): 0
1037#define wxUSE_ACCESSIBILITY 0
1038
bf84b0be 1039// ----------------------------------------------------------------------------
3b415ba4 1040// miscellaneous settings
bf84b0be
VZ
1041// ----------------------------------------------------------------------------
1042
68a602fc
VZ
1043// wxSingleInstanceChecker class allows to verify at startup if another program
1044// instance is running (it is only available under Win32)
1045//
1046// Default is 1
1047//
1048// Recommended setting: 1 (the class is tiny, disabling it won't save much
1049// space)
1050#define wxUSE_SNGLINST_CHECKER 1
1051
24fd6d87
VZ
1052#define wxUSE_DRAGIMAGE 1
1053
9bd6a503
VZ
1054#define wxUSE_IPC 1
1055 // 0 for no interprocess comms
9bd6a503
VZ
1056#define wxUSE_HELP 1
1057 // 0 for no help facility
874efd13 1058
f05b5b77
VZ
1059// Should we use MS HTML help for wxHelpController? If disabled, neither
1060// wxCHMHelpController nor wxBestHelpController are available.
1061//
a0680daf 1062// Default is 1 under MSW, 0 is always used for the other platforms.
f05b5b77
VZ
1063//
1064// Recommended setting: 1, only set to 0 if you have trouble compiling
1065// wxCHMHelpController (could be a problem with really ancient compilers)
1066#define wxUSE_MS_HTML_HELP 1
1067
1068
874efd13 1069// Use wxHTML-based help controller?
3379ed37 1070#define wxUSE_WXHTML_HELP 1
874efd13 1071
c67b4daf 1072#define wxUSE_RESOURCES 0
9bd6a503
VZ
1073 // 0 for no wxGetResource/wxWriteResource
1074#define wxUSE_CONSTRAINTS 1
1075 // 0 for no window layout constraint system
1076
9bd6a503 1077#define wxUSE_SPLINES 1
83b1bfaa 1078 // 0 for no splines
9bd6a503 1079
d2c52078
RD
1080#define wxUSE_MOUSEWHEEL 1
1081 // Include mouse wheel support
1082
3b415ba4 1083// ----------------------------------------------------------------------------
3ca6a5f0 1084// postscript support settings
3b415ba4
VZ
1085// ----------------------------------------------------------------------------
1086
3ca6a5f0 1087// Set to 1 for PostScript device context.
3b415ba4 1088#define wxUSE_POSTSCRIPT 0
3ca6a5f0
BP
1089
1090// Set to 1 to use font metric files in GetTextExtent
12bdd77c 1091#define wxUSE_AFM_FOR_POSTSCRIPT 1
9bd6a503 1092
3b415ba4
VZ
1093// ----------------------------------------------------------------------------
1094// database classes
1095// ----------------------------------------------------------------------------
9bd6a503 1096
3ca6a5f0 1097// Define 1 to use ODBC classes
83b1bfaa 1098#define wxUSE_ODBC 0
9bd6a503 1099
3ca6a5f0
BP
1100// For backward compatibility reasons, this parameter now only controls the
1101// default scrolling method used by cursors. This default behavior can be
d2c52078 1102// overriden by setting the second param of wxDB::wxDbGetConnection() or
3ca6a5f0 1103// wxDb() constructor to indicate whether the connection (and any wxDbTable()s
d2c52078
RD
1104// that use the connection) should support forward only scrolling of cursors,
1105// or both forward and backward support for backward scrolling cursors is
3ca6a5f0 1106// dependent on the data source as well as the ODBC driver being used.
aeb040bf 1107#define wxODBC_FWD_ONLY_CURSORS 1
9695185a 1108
3ca6a5f0 1109// Default is 0. Set to 1 to use the deprecated classes, enum types, function,
3103e8a9 1110// member variables. With a setting of 1, full backward compatibility with the
3ca6a5f0
BP
1111// 2.0.x release is possible. It is STRONGLY recommended that this be set to 0,
1112// as future development will be done only on the non-deprecated
1113// functions/classes/member variables/etc.
f6bcfd97 1114#define wxODBC_BACKWARD_COMPATABILITY 0
f6bcfd97 1115
3b415ba4
VZ
1116// ----------------------------------------------------------------------------
1117// other compiler (mis)features
1118// ----------------------------------------------------------------------------
1119
1120// Set this to 0 if your compiler can't cope with omission of prototype
1121// parameters.
1122//
1123// Default is 1.
1124//
1125// Recommended setting: 1 (should never need to set this to 0)
1126#define REMOVE_UNUSED_ARG 1
1127
1128// VC++ 4.2 and above allows <iostream> and <iostream.h> but you can't mix
eb382f3e
VZ
1129// them. Set to 1 for <iostream.h>, 0 for <iostream>. Note that VC++ 7.1
1130// and later doesn't support wxUSE_IOSTREAMH == 1 and so <iostream> will be
1131// used anyhow.
3b415ba4
VZ
1132//
1133// Default is 1.
1134//
1135// Recommended setting: whatever your compiler likes more
dbda9e86 1136#define wxUSE_IOSTREAMH 1
d4ec5d32 1137
3b415ba4
VZ
1138// ----------------------------------------------------------------------------
1139// image format support
1140// ----------------------------------------------------------------------------
1141
3ca6a5f0
BP
1142// wxImage supports many different image formats which can be configured at
1143// compile-time. BMP is always supported, others are optional and can be safely
1144// disabled if you don't plan to use images in such format sometimes saving
1145// substantial amount of code in the final library.
1146//
1147// Some formats require an extra library which is included in wxWin sources
1148// which is mentioned if it is the case.
1149
0046ff7c
VS
1150// Set to 1 for wxImage support (recommended).
1151#define wxUSE_IMAGE 1
1152
3ca6a5f0 1153// Set to 1 for PNG format support (requires libpng). Also requires wxUSE_ZLIB.
9bd6a503 1154#define wxUSE_LIBPNG 1
3ca6a5f0
BP
1155
1156// Set to 1 for JPEG format support (requires libjpeg)
83b1bfaa 1157#define wxUSE_LIBJPEG 1
3ca6a5f0
BP
1158
1159// Set to 1 for TIFF format support (requires libtiff)
1ea67089 1160#define wxUSE_LIBTIFF 1
3ca6a5f0 1161
3af706cc
VZ
1162// Set to 1 for TGA format support (loading only)
1163#define wxUSE_TGA 1
1164
3ca6a5f0 1165// Set to 1 for GIF format support
83b1bfaa 1166#define wxUSE_GIF 1
3ca6a5f0
BP
1167
1168// Set to 1 for PNM format support
1044a386 1169#define wxUSE_PNM 1
3ca6a5f0
BP
1170
1171// Set to 1 for PCX format support
1044a386 1172#define wxUSE_PCX 1
9bd6a503 1173
d297e8ff
VZ
1174// Set to 1 for IFF format support (Amiga format)
1175#define wxUSE_IFF 0
4b6b4dfc 1176
0046ff7c
VS
1177// Set to 1 for XPM format support
1178#define wxUSE_XPM 1
1179
658974ae
VS
1180// Set to 1 for MS Icons and Cursors format support
1181#define wxUSE_ICO_CUR 1
1182
874efd13 1183// Set to 1 to compile in wxPalette class
d275c7eb
VZ
1184#define wxUSE_PALETTE 1
1185
4353a8df
VZ
1186// ----------------------------------------------------------------------------
1187// wxUniversal-only options
1188// ----------------------------------------------------------------------------
1189
1190// Set to 1 to enable compilation of all themes, this is the default
1191#define wxUSE_ALL_THEMES 1
1192
1193// Set to 1 to enable the compilation of individual theme if wxUSE_ALL_THEMES
1194// is unset, if it is set these options are not used; notice that metal theme
1195// uses Win32 one
1196#define wxUSE_THEME_GTK 0
1197#define wxUSE_THEME_METAL 0
1198#define wxUSE_THEME_MONO 0
1199#define wxUSE_THEME_WIN32 0
1200
1201
24ab5c03
VZ
1202/* --- end common options --- */
1203
3b415ba4
VZ
1204// ----------------------------------------------------------------------------
1205// Windows-only settings
1206// ----------------------------------------------------------------------------
1318fabe 1207
2bb06220
VZ
1208// Set wxUSE_UNICODE_MSLU to 1 if you're compiling wxWidgets in Unicode mode
1209// and want to run your programs under Windows 9x and not only NT/2000/XP.
1210// This setting enables use of unicows.dll from MSLU (MS Layer for Unicode, see
1211// http://www.microsoft.com/globaldev/handson/dev/mslu_announce.mspx). Note
1212// that you will have to modify the makefiles to include unicows.lib import
1213// library as the first library (see installation instructions in install.txt
1214// to learn how to do it when building the library or samples).
1215//
1216// If your compiler doesn't have unicows.lib, you can get a version of it at
1217// http://libunicows.sourceforge.net
1218//
1219// Default is 0
1220//
1221// Recommended setting: 0 (1 if you want to deploy Unicode apps on 9x systems)
1222#ifndef wxUSE_UNICODE_MSLU
1223 #define wxUSE_UNICODE_MSLU 0
1224#endif
1225
77ffb593 1226// Set this to 1 if you want to use wxWidgets and MFC in the same program. This
3ca6a5f0
BP
1227// will override some other settings (see below)
1228//
1229// Default is 0.
1230//
1231// Recommended setting: 0 unless you really have to use MFC
3f8e5072
JS
1232#define wxUSE_MFC 0
1233
3ca6a5f0
BP
1234// Set this to 1 for generic OLE support: this is required for drag-and-drop,
1235// clipboard, OLE Automation. Only set it to 0 if your compiler is very old and
1236// can't compile/doesn't have the OLE headers.
1237//
1238// Default is 1.
1239//
1240// Recommended setting: 1
3aa0e8fa 1241#define wxUSE_OLE 1
3aa0e8fa 1242
ca5c6ac3
VZ
1243// Set this to 1 to enable wxAutomationObject class.
1244//
1245// Default is 1.
1246//
1247// Recommended setting: 1 if you need to control other applications via OLE
1248// Automation, can be safely set to 0 otherwise
1249#define wxUSE_OLE_AUTOMATION 1
1250
a1f48575
VZ
1251// Set this to 1 to enable wxActiveXContainer class allowing to embed OLE
1252// controls in wx.
1253//
1254// Default is 1.
1255//
1256// Recommended setting: 1, required by wxMediaCtrl
1257#define wxUSE_ACTIVEX 1
1258
6d1fbf78
VZ
1259// wxDC cacheing implementation
1260#define wxUSE_DC_CACHEING 1
1261
1262// Set this to 1 to enable the use of DIB's for wxBitmap to support
1263// bitmaps > 16MB on Win95/98/Me. Set to 0 to use DDB's only.
1264#define wxUSE_DIB_FOR_BITMAP 0
1265
da75a14e
VZ
1266// Set this to 1 to enable wxDIB class used internally for manipulating
1267// wxBitmao data.
1268//
1269// Default is 1, set it to 0 only if you don't use wxImage neither
1270//
1271// Recommended setting: 1 (without it conversion to/from wxImage won't work)
6d1fbf78
VZ
1272#define wxUSE_WXDIB 1
1273
e6bdaaad
MW
1274// Set to 0 to disable PostScript print/preview architecture code under Windows
1275// (just use Windows printing).
1276#define wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW 1
1277
3ca6a5f0
BP
1278// Set this to 1 to use RICHEDIT controls for wxTextCtrl with style wxTE_RICH
1279// which allows to put more than ~32Kb of text in it even under Win9x (NT
1280// doesn't have such limitation).
1281//
1282// Default is 1 for compilers which support it
1283//
1284// Recommended setting: 1, only set it to 0 if your compiler doesn't have
1285// or can't compile <richedit.h>
be329a3d
RD
1286#define wxUSE_RICHEDIT 1
1287
c5a12362
VZ
1288// Set this to 1 to use extra features of richedit v2 and later controls
1289//
1290// Default is 1 for compilers which support it
1291//
1292// Recommended setting: 1
be329a3d
RD
1293#define wxUSE_RICHEDIT2 1
1294
3ca6a5f0
BP
1295// Set this to 1 to enable support for the owner-drawn menu and listboxes. This
1296// is required by wxUSE_CHECKLISTBOX.
1297//
1298// Default is 1.
1299//
1300// Recommended setting: 1, set to 0 for a small library size reduction
1301#define wxUSE_OWNER_DRAWN 1
1302
85b43fbf
JS
1303// Set to 1 to compile MS Windows XP theme engine support
1304#define wxUSE_UXTHEME 1
1305
1306// Set to 1 to auto-adapt to MS Windows XP themes where possible
1307// (notably, wxNotebook pages)
1308#define wxUSE_UXTHEME_AUTO 1
1309
f4edf138
JS
1310// Set to 1 to use InkEdit control (Tablet PC), if available
1311#define wxUSE_INKEDIT 0
1312
04049dbb
VZ
1313// ----------------------------------------------------------------------------
1314// Generic versions of native controls
1315// ----------------------------------------------------------------------------
1316
1317// Set this to 1 to be able to use wxDatePickerCtrlGeneric in addition to the
1318// native wxDatePickerCtrl
1319//
1320// Default is 0.
1321//
1322// Recommended setting: 0, this is mainly used for testing
1323#define wxUSE_DATEPICKCTRL_GENERIC 0
1324
1b68f1da
VZ
1325// ----------------------------------------------------------------------------
1326// Crash debugging helpers
1327// ----------------------------------------------------------------------------
1328
1329// Set this to 1 to be able to use wxCrashReport::Generate() to create mini
1330// dumps of your program when it crashes (or at any other moment)
1331//
3e3a3e17 1332// Default is 1 if supported by the compiler (VC++ and recent BC++ only).
1b68f1da
VZ
1333//
1334// Recommended setting: 1, set to 0 if your programs never crash
1335#define wxUSE_CRASHREPORT 1
1336
3ca6a5f0
BP
1337// ----------------------------------------------------------------------------
1338// obsolete settings
1339// ----------------------------------------------------------------------------
1340
1341// NB: all settings in this section are obsolete and should not be used/changed
1342// at all, they will disappear
1343
3ca6a5f0
BP
1344// Define 1 to use bitmap messages.
1345#define wxUSE_BITMAP_MESSAGE 1
1346
ef782301
VZ
1347#endif // _WX_SETUP_H_
1348