Removed old classes and functions

[wxWidgets.git] / contrib / docs / latex / deprecated / function.tex

\chapter{Functions}\label{functions}
\setheader{{\it CHAPTER \thechapter}}{}{}{}{}{{\it CHAPTER \thechapter}}%
\setfooter{\thepage}{}{}{}{}{\thepage}

Deprecated functions and macros defined in wxWindows are described here: you can
either look up a function using the alphabetical listing of them or find it in
the corresponding topic.

\section{Alphabetical functions and macros list}

%\helpref{wxGetResource}{wxgetresource}\\
%\helpref{wxLoadUserResource}{wxloaduserresource}\\
%\helpref{wxMakeMetafilePlaceable}{wxmakemetafileplaceable}\\
%\helpref{wxNewId}{wxnewid}\\
\helpref{wxResourceAddIdentifier}{wxresourceaddidentifier}\\
\helpref{wxResourceClear}{wxresourceclear}\\
\helpref{wxResourceCreateBitmap}{wxresourcecreatebitmap}\\
\helpref{wxResourceCreateIcon}{wxresourcecreateicon}\\
\helpref{wxResourceCreateMenuBar}{wxresourcecreatemenubar}\\
\helpref{wxResourceGetIdentifier}{wxresourcegetidentifier}\\
\helpref{wxResourceParseData}{wxresourcedata}\\
\helpref{wxResourceParseFile}{wxresourceparsefile}\\
\helpref{wxResourceParseString}{wxresourceparsestring}\\
\helpref{wxResourceRegisterBitmapData}{registerbitmapdata}\\
\helpref{wxResourceRegisterIconData}{wxresourceregistericondata}\\
%\helpref{wxSetPrinterCommand}{wxsetprintercommand}\\
%\helpref{wxSetPrinterFile}{wxsetprinterfile}\\
%\helpref{wxSetPrinterMode}{wxsetprintermode}\\
%\helpref{wxSetPrinterOptions}{wxsetprinteroptions}\\
%\helpref{wxSetPrinterOrientation}{wxsetprinterorientation}\\
%\helpref{wxSetPrinterPreviewCommand}{wxsetprinterpreviewcommand}\\
%\helpref{wxSetPrinterScaling}{wxsetprinterscaling}\\
%\helpref{wxSetPrinterTranslation}{wxsetprintertranslation}\\

\section{Printer settings}\label{printersettings}

{\bf NB:} These routines are obsolete and should no longer be used!

The following functions are used to control PostScript printing. Under
Windows, PostScript output can only be sent to a file.

\wxheading{Include files}

<wx/dcps.h>

\membersection{::wxGetPrinterCommand}\label{wxgetprintercommand}

\func{wxString}{wxGetPrinterCommand}{\void}

Gets the printer command used to print a file. The default is {\tt lpr}.

\membersection{::wxGetPrinterFile}\label{wxgetprinterfile}

\func{wxString}{wxGetPrinterFile}{\void}

Gets the PostScript output filename.

\membersection{::wxGetPrinterMode}\label{wxgetprintermode}

\func{int}{wxGetPrinterMode}{\void}

Gets the printing mode controlling where output is sent (PS\_PREVIEW, PS\_FILE or PS\_PRINTER).
The default is PS\_PREVIEW.

\membersection{::wxGetPrinterOptions}\label{wxgetprinteroptions}

\func{wxString}{wxGetPrinterOptions}{\void}

Gets the additional options for the print command (e.g. specific printer). The default is nothing.

\membersection{::wxGetPrinterOrientation}\label{wxgetprinterorientation}

\func{int}{wxGetPrinterOrientation}{\void}

Gets the orientation (PS\_PORTRAIT or PS\_LANDSCAPE). The default is PS\_PORTRAIT.

\membersection{::wxGetPrinterPreviewCommand}\label{wxgetprinterpreviewcommand}

\func{wxString}{wxGetPrinterPreviewCommand}{\void}

Gets the command used to view a PostScript file. The default depends on the platform.

\membersection{::wxGetPrinterScaling}\label{wxgetprinterscaling}

\func{void}{wxGetPrinterScaling}{\param{float *}{x}, \param{float *}{y}}

Gets the scaling factor for PostScript output. The default is 1.0, 1.0.

\membersection{::wxGetPrinterTranslation}\label{wxgetprintertranslation}

\func{void}{wxGetPrinterTranslation}{\param{float *}{x}, \param{float *}{y}}

Gets the translation (from the top left corner) for PostScript output. The default is 0.0, 0.0.

\membersection{::wxSetPrinterCommand}\label{wxsetprintercommand}

\func{void}{wxSetPrinterCommand}{\param{const wxString\& }{command}}

Sets the printer command used to print a file. The default is {\tt lpr}.

\membersection{::wxSetPrinterFile}\label{wxsetprinterfile}

\func{void}{wxSetPrinterFile}{\param{const wxString\& }{filename}}

Sets the PostScript output filename.

\membersection{::wxSetPrinterMode}\label{wxsetprintermode}

\func{void}{wxSetPrinterMode}{\param{int }{mode}}

Sets the printing mode controlling where output is sent (PS\_PREVIEW, PS\_FILE or PS\_PRINTER).
The default is PS\_PREVIEW.

\membersection{::wxSetPrinterOptions}\label{wxsetprinteroptions}

\func{void}{wxSetPrinterOptions}{\param{const wxString\& }{options}}

Sets the additional options for the print command (e.g. specific printer). The default is nothing.

\membersection{::wxSetPrinterOrientation}\label{wxsetprinterorientation}

\func{void}{wxSetPrinterOrientation}{\param{int}{ orientation}}

Sets the orientation (PS\_PORTRAIT or PS\_LANDSCAPE). The default is PS\_PORTRAIT.

\membersection{::wxSetPrinterPreviewCommand}\label{wxsetprinterpreviewcommand}

\func{void}{wxSetPrinterPreviewCommand}{\param{const wxString\& }{command}}

Sets the command used to view a PostScript file. The default depends on the platform.

\membersection{::wxSetPrinterScaling}\label{wxsetprinterscaling}

\func{void}{wxSetPrinterScaling}{\param{float }{x}, \param{float }{y}}

Sets the scaling factor for PostScript output. The default is 1.0, 1.0.

\membersection{::wxSetPrinterTranslation}\label{wxsetprintertranslation}

\func{void}{wxSetPrinterTranslation}{\param{float }{x}, \param{float }{y}}

Sets the translation (from the top left corner) for PostScript output. The default is 0.0, 0.0.

\section{Resource functions}\label{resourcefunctions}

\overview{Resource functions}{resourceformats}

This section details functions for manipulating wxWindows (.WXR) resource
files and loading user interface elements from resources.

\normalbox{Please note that this use of the word `resource' is different from that used when talking
about initialisation file resource reading and writing, using such functions
as wxWriteResource and wxGetResource. It is just an unfortunate clash of terminology.}

\helponly{For an overview of the wxWindows resource mechanism, see \helpref{the wxWindows resource system}{resourceformats}.}

See also \helpref{wxWindow::LoadFromResource}{wxwindowloadfromresource} for
loading from resource data.

\membersection{::wxResourceAddIdentifier}\label{wxresourceaddidentifier}

\func{bool}{wxResourceAddIdentifier}{\param{const wxString\& }{name}, \param{int }{value}}

Used for associating a name with an integer identifier (equivalent to dynamically\rtfsp
{\tt\#}defining a name to an integer). Unlikely to be used by an application except
perhaps for implementing resource functionality for interpreted languages.

\membersection{::wxResourceClear}\label{wxresourceclear}

\func{void}{wxResourceClear}{\void}

Clears the wxWindows resource table.

\membersection{::wxResourceCreateBitmap}\label{wxresourcecreatebitmap}

\func{wxBitmap *}{wxResourceCreateBitmap}{\param{const wxString\& }{resource}}

Creates a new bitmap from a file, static data, or Windows resource, given a valid
wxWindows bitmap resource identifier. For example, if the .WXR file contains
the following:

\begin{verbatim}
static const wxString\& project_resource = "bitmap(name = 'project_resource',\
  bitmap = ['project', wxBITMAP_TYPE_BMP_RESOURCE, 'WINDOWS'],\
  bitmap = ['project.xpm', wxBITMAP_TYPE_XPM, 'X']).";
\end{verbatim}

then this function can be called as follows:

\begin{verbatim}
  wxBitmap *bitmap  = wxResourceCreateBitmap("project_resource");
\end{verbatim}

\membersection{::wxResourceCreateIcon}\label{wxresourcecreateicon}

\func{wxIcon *}{wxResourceCreateIcon}{\param{const wxString\& }{resource}}

Creates a new icon from a file, static data, or Windows resource, given a valid
wxWindows icon resource identifier. For example, if the .WXR file contains
the following:

\begin{verbatim}
static const wxString\& project_resource = "icon(name = 'project_resource',\
  icon = ['project', wxBITMAP_TYPE_ICO_RESOURCE, 'WINDOWS'],\
  icon = ['project', wxBITMAP_TYPE_XBM_DATA, 'X']).";
\end{verbatim}

then this function can be called as follows:

\begin{verbatim}
  wxIcon *icon = wxResourceCreateIcon("project_resource");
\end{verbatim}

\membersection{::wxResourceCreateMenuBar}\label{wxresourcecreatemenubar}

\func{wxMenuBar *}{wxResourceCreateMenuBar}{\param{const wxString\& }{resource}}

Creates a new menu bar given a valid wxWindows menubar resource
identifier. For example, if the .WXR file contains the following:

\begin{verbatim}
static const wxString\& menuBar11 = "menu(name = 'menuBar11',\
  menu = \
  [\
    ['&File', 1, '', \
      ['&Open File', 2, 'Open a file'],\
      ['&Save File', 3, 'Save a file'],\
      [],\
      ['E&xit', 4, 'Exit program']\
    ],\
    ['&Help', 5, '', \
      ['&About', 6, 'About this program']\
    ]\
  ]).";
\end{verbatim}

then this function can be called as follows:

\begin{verbatim}
  wxMenuBar *menuBar = wxResourceCreateMenuBar("menuBar11");
\end{verbatim}


\membersection{::wxResourceGetIdentifier}\label{wxresourcegetidentifier}

\func{int}{wxResourceGetIdentifier}{\param{const wxString\& }{name}}

Used for retrieving the integer value associated with an identifier.
A zero value indicates that the identifier was not found.

See \helpref{wxResourceAddIdentifier}{wxresourceaddidentifier}.

\membersection{::wxResourceParseData}\label{wxresourcedata}

\func{bool}{wxResourceParseData}{\param{const wxString\& }{resource}, \param{wxResourceTable *}{table = NULL}}

Parses a string containing one or more wxWindows resource objects. If
the resource objects are global static data that are included into the
C++ program, then this function must be called for each variable
containing the resource data, to make it known to wxWindows.

{\it resource} should contain data in the following form:

\begin{verbatim}
dialog(name = 'dialog1',
  style = 'wxCAPTION | wxDEFAULT_DIALOG_STYLE',
  title = 'Test dialog box',
  x = 312, y = 234, width = 400, height = 300,
  modal = 0,
  control = [1000, wxStaticBox, 'Groupbox', '0', 'group6', 5, 4, 380, 262,
      [11, 'wxSWISS', 'wxNORMAL', 'wxNORMAL', 0]],
  control = [1001, wxTextCtrl, '', 'wxTE_MULTILINE', 'text3',
      156, 126, 200, 70, 'wxWindows is a multi-platform, GUI toolkit.',
      [11, 'wxSWISS', 'wxNORMAL', 'wxNORMAL', 0],
      [11, 'wxSWISS', 'wxNORMAL', 'wxNORMAL', 0]]).
\end{verbatim}

This function will typically be used after including a {\tt .wxr} file into
a C++ program as follows:

\begin{verbatim}
#include "dialog1.wxr"
\end{verbatim}

Each of the contained resources will declare a new C++ variable, and each
of these variables should be passed to wxResourceParseData.

\membersection{::wxResourceParseFile}\label{wxresourceparsefile}

\func{bool}{wxResourceParseFile}{\param{const wxString\& }{filename}, \param{wxResourceTable *}{table = NULL}}

Parses a file containing one or more wxWindows resource objects
in C++-compatible syntax. Use this function to dynamically load
wxWindows resource data.

\membersection{::wxResourceParseString}\label{wxresourceparsestring}

\func{bool}{wxResourceParseString}{\param{char *}{s}, \param{wxResourceTable *}{table = NULL}}

Parses a string containing one or more wxWindows resource objects. If
the resource objects are global static data that are included into the
C++ program, then this function must be called for each variable
containing the resource data, to make it known to wxWindows.

{\it resource} should contain data with the following form:

\begin{verbatim}
dialog(name = 'dialog1',
  style = 'wxCAPTION | wxDEFAULT_DIALOG_STYLE',
  title = 'Test dialog box',
  x = 312, y = 234, width = 400, height = 300,
  modal = 0,
  control = [1000, wxStaticBox, 'Groupbox', '0', 'group6', 5, 4, 380, 262,
      [11, 'wxSWISS', 'wxNORMAL', 'wxNORMAL', 0]],
  control = [1001, wxTextCtrl, '', 'wxTE_MULTILINE', 'text3',
      156, 126, 200, 70, 'wxWindows is a multi-platform, GUI toolkit.',
      [11, 'wxSWISS', 'wxNORMAL', 'wxNORMAL', 0],
      [11, 'wxSWISS', 'wxNORMAL', 'wxNORMAL', 0]]).
\end{verbatim}

This function will typically be used after calling \helpref{wxLoadUserResource}{wxloaduserresource} to
load an entire {\tt .wxr file} into a string.

\membersection{::wxResourceRegisterBitmapData}\label{registerbitmapdata}

\func{bool}{wxResourceRegisterBitmapData}{\param{const wxString\& }{name}, \param{char *}{xbm\_data}, \param{int }{width},
\param{int }{height}, \param{wxResourceTable *}{table = NULL}}

\func{bool}{wxResourceRegisterBitmapData}{\param{const wxString\& }{name}, \param{char **}{xpm\_data}}

Makes {\tt\#}included XBM or XPM bitmap data known to the wxWindows resource system.
This is required if other resources will use the bitmap data, since otherwise there
is no connection between names used in resources, and the global bitmap data.

\membersection{::wxResourceRegisterIconData}\label{wxresourceregistericondata}

Another name for \helpref{wxResourceRegisterBitmapData}{registerbitmapdata}.