]> git.saurik.com Git - wxWidgets.git/blame - include/wx/os2/setup0.h
Bring AddActionTrigger() doc string up to date with the interface
[wxWidgets.git] / include / wx / os2 / setup0.h
CommitLineData
b63269ca
WS
1/////////////////////////////////////////////////////////////////////////////
2// Name: wx/os2/setup.h
3// Purpose: Configuration for the library
4// Author: Julian Smart
5// Modified by:
6// Created: 01/02/97
7// RCS-ID: $Id$
8// Copyright: (c) Julian Smart
9// Licence: wxWindows licence
10/////////////////////////////////////////////////////////////////////////////
11
12#ifndef _WX_SETUP_H_
13#define _WX_SETUP_H_
14
15/* --- start common options --- */
b63269ca
WS
16// ----------------------------------------------------------------------------
17// global settings
18// ----------------------------------------------------------------------------
19
20// define this to 0 when building wxBase library - this can also be done from
21// makefile/project file overriding the value here
22#ifndef wxUSE_GUI
23 #define wxUSE_GUI 1
24#endif // wxUSE_GUI
25
26// ----------------------------------------------------------------------------
27// compatibility settings
28// ----------------------------------------------------------------------------
29
dee1a63f 30// This setting determines the compatibility with 2.6 API: set it to 0 to
b63269ca
WS
31// flag all cases of using deprecated functions.
32//
33// Default is 1 but please try building your code with 0 as the default will
34// change to 0 in the next version and the deprecated functions will disappear
35// in the version after it completely.
36//
37// Recommended setting: 0 (please update your code)
abb6edd1
VS
38#define WXWIN_COMPATIBILITY_2_6 0
39
40// This setting determines the compatibility with 2.8 API: set it to 0 to
41// flag all cases of using deprecated functions.
42//
43// Default is 1 but please try building your code with 0 as the default will
44// change to 0 in the next version and the deprecated functions will disappear
45// in the version after it completely.
46//
47// Recommended setting: 0 (please update your code)
48#define WXWIN_COMPATIBILITY_2_8 1
b63269ca
WS
49
50// MSW-only: Set to 0 for accurate dialog units, else 1 for old behaviour when
51// default system font is used for wxWindow::GetCharWidth/Height() instead of
52// the current font.
53//
54// Default is 0
55//
56// Recommended setting: 0
57#define wxDIALOG_UNIT_COMPATIBILITY 0
58
59// ----------------------------------------------------------------------------
60// debugging settings
61// ----------------------------------------------------------------------------
62
ab06470e
VZ
63// wxDEBUG_LEVEL will be defined as 1 in wx/debug.h so normally there is no
64// need to define it here. You may do it for two reasons: either completely
65// disable/compile out the asserts in release version (then do it inside #ifdef
66// NDEBUG) or, on the contrary, enable more asserts, including the usually
67// disabled ones, in the debug build (then do it inside #ifndef NDEBUG)
68//
69// #ifdef NDEBUG
70// #define wxDEBUG_LEVEL 0
71// #else
72// #define wxDEBUG_LEVEL 2
73// #endif
74
75// wxHandleFatalExceptions() may be used to catch the program faults at run
76// time and, instead of terminating the program with a usual GPF message box,
77// call the user-defined wxApp::OnFatalException() function. If you set
78// wxUSE_ON_FATAL_EXCEPTION to 0, wxHandleFatalExceptions() will not work.
79//
80// This setting is for Win32 only and can only be enabled if your compiler
81// supports Win32 structured exception handling (currently only VC++ does)
82//
83// Default is 1
84//
85// Recommended setting: 1 if your compiler supports it.
86#define wxUSE_ON_FATAL_EXCEPTION 1
87
88// Set this to 1 to be able to generate a human-readable (unlike
89// machine-readable minidump created by wxCrashReport::Generate()) stack back
90// trace when your program crashes using wxStackWalker
91//
92// Default is 1 if supported by the compiler.
93//
94// Recommended setting: 1, set to 0 if your programs never crash
95#define wxUSE_STACKWALKER 1
96
97// Set this to 1 to compile in wxDebugReport class which allows you to create
98// and optionally upload to your web site a debug report consisting of back
99// trace of the crash (if wxUSE_STACKWALKER == 1) and other information.
100//
101// Default is 1 if supported by the compiler.
102//
103// Recommended setting: 1, it is compiled into a separate library so there
104// is no overhead if you don't use it
105#define wxUSE_DEBUGREPORT 1
106
b63269ca
WS
107// Generic comment about debugging settings: they are very useful if you don't
108// use any other memory leak detection tools such as Purify/BoundsChecker, but
109// are probably redundant otherwise. Also, Visual C++ CRT has the same features
110// as wxWidgets memory debugging subsystem built in since version 5.0 and you
111// may prefer to use it instead of built in memory debugging code because it is
112// faster and more fool proof.
113//
ab06470e
VZ
114// Using VC++ CRT memory debugging is enabled by default in debug build (_DEBUG
115// is defined) if wxUSE_GLOBAL_MEMORY_OPERATORS is *not* enabled (i.e. is 0)
b63269ca
WS
116// and if __NO_VC_CRTDBG__ is not defined.
117
ab06470e
VZ
118// The rest of the options in this section are obsolete and not supported,
119// enable them at your own risk.
120
b63269ca
WS
121// If 1, enables wxDebugContext, for writing error messages to file, etc. If
122// __WXDEBUG__ is not defined, will still use the normal memory operators.
123//
124// Default is 0
125//
126// Recommended setting: 0
127#define wxUSE_DEBUG_CONTEXT 0
128
129// If 1, enables debugging versions of wxObject::new and wxObject::delete *IF*
130// __WXDEBUG__ is also defined.
131//
132// WARNING: this code may not work with all architectures, especially if
133// alignment is an issue. This switch is currently ignored for mingw / cygwin
134//
135// Default is 0
136//
137// Recommended setting: 1 if you are not using a memory debugging tool, else 0
138#define wxUSE_MEMORY_TRACING 0
139
140// In debug mode, cause new and delete to be redefined globally.
141// If this causes problems (e.g. link errors which is a common problem
142// especially if you use another library which also redefines the global new
143// and delete), set this to 0.
144// This switch is currently ignored for mingw / cygwin
145//
146// Default is 0
147//
148// Recommended setting: 0
149#define wxUSE_GLOBAL_MEMORY_OPERATORS 0
150
151// In debug mode, causes new to be defined to be WXDEBUG_NEW (see object.h). If
152// this causes problems (e.g. link errors), set this to 0. You may need to set
153// this to 0 if using templates (at least for VC++). This switch is currently
154// ignored for mingw / cygwin / CodeWarrior
155//
156// Default is 0
157//
158// Recommended setting: 0
159#define wxUSE_DEBUG_NEW_ALWAYS 0
160
b63269ca
WS
161
162// ----------------------------------------------------------------------------
163// Unicode support
164// ----------------------------------------------------------------------------
165
8575ff50
VZ
166// These settings are obsolete: the library is always built in Unicode mode
167// now, only set wxUSE_UNICODE to 0 to compile legacy code in ANSI mode if
168// absolutely necessary -- updating it is strongly recommended as the ANSI mode
169// will disappear completely in future wxWidgets releases.
b63269ca 170#ifndef wxUSE_UNICODE
8575ff50 171 #define wxUSE_UNICODE 1
b63269ca
WS
172#endif
173
8575ff50 174// wxUSE_WCHAR_T is required by wxWidgets now, don't change.
b63269ca
WS
175#define wxUSE_WCHAR_T 1
176
177// ----------------------------------------------------------------------------
178// global features
179// ----------------------------------------------------------------------------
180
181// Compile library in exception-safe mode? If set to 1, the library will try to
182// behave correctly in presence of exceptions (even though it still will not
183// use the exceptions itself) and notify the user code about any unhandled
184// exceptions. If set to 0, propagation of the exceptions through the library
185// code will lead to undefined behaviour -- but the code itself will be
186// slightly smaller and faster.
187//
188// Note that like wxUSE_THREADS this option is automatically set to 0 if
189// wxNO_EXCEPTIONS is defined.
190//
191// Default is 1
192//
193// Recommended setting: depends on whether you intend to use C++ exceptions
194// in your own code (1 if you do, 0 if you don't)
195#define wxUSE_EXCEPTIONS 1
196
197// Set wxUSE_EXTENDED_RTTI to 1 to use extended RTTI
198//
199// Default is 0
200//
201// Recommended setting: 0 (this is still work in progress...)
202#define wxUSE_EXTENDED_RTTI 0
203
204// Set wxUSE_STL to 1 to derive wxList(Foo) and wxArray(Foo) from
205// std::list<Foo*> and std::vector<Foo*>, with a compatibility interface,
206// and for wxHashMap to be implemented with templates.
207//
208// Default is 0
209//
210// Recommended setting: YMMV
211#define wxUSE_STL 0
212
213// Support for message/error logging. This includes wxLogXXX() functions and
214// wxLog and derived classes. Don't set this to 0 unless you really know what
215// you are doing.
216//
217// Default is 1
218//
219// Recommended setting: 1 (always)
220#define wxUSE_LOG 1
221
222// Recommended setting: 1
223#define wxUSE_LOGWINDOW 1
224
225// Recommended setting: 1
226#define wxUSE_LOGGUI 1
227
228// Recommended setting: 1
229#define wxUSE_LOG_DIALOG 1
230
231// Support for command line parsing using wxCmdLineParser class.
232//
233// Default is 1
234//
235// Recommended setting: 1 (can be set to 0 if you don't use the cmd line)
236#define wxUSE_CMDLINE_PARSER 1
237
238// Support for multithreaded applications: if 1, compile in thread classes
239// (thread.h) and make the library a bit more thread safe. Although thread
240// support is quite stable by now, you may still consider recompiling the
241// library without it if you have no use for it - this will result in a
242// somewhat smaller and faster operation.
243//
244// Notice that if wxNO_THREADS is defined, wxUSE_THREADS is automatically reset
245// to 0 in wx/chkconf.h, so, for example, if you set USE_THREADS to 0 in
246// build/msw/config.* file this value will have no effect.
247//
248// Default is 1
249//
250// Recommended setting: 0 unless you do plan to develop MT applications
251#define wxUSE_THREADS 1
252
5f2c545c
VZ
253// If enabled, compiles wxWidgets streams classes
254//
255// wx stream classes are used for image IO, process IO redirection, network
256// protocols implementation and much more and so disabling this results in a
257// lot of other functionality being lost.
258//
259// Default is 1
260//
261// Recommended setting: 1 as setting it to 0 disables many other things
b63269ca
WS
262#define wxUSE_STREAMS 1
263
bb445ba7
VZ
264// This is not a real option but is used as the default value for
265// wxUSE_STD_IOSTREAM and wxUSE_STD_STRING.
266//
267// Currently the Digital Mars and Watcom compilers come without standard C++
268// library headers by default, wxUSE_STD_STRING can be set to 1 if you do have
269// them (e.g. from STLPort).
270//
271// VC++ 5.0 does include standard C++ library headers, however they produce
272// many warnings that can't be turned off when compiled at warning level 4.
273#if defined(__DMC__) || defined(__WATCOMC__) \
274 || (defined(_MSC_VER) && _MSC_VER < 1200)
275 #define wxUSE_STD_DEFAULT 0
276#else
277 #define wxUSE_STD_DEFAULT 1
278#endif
279
5f2c545c
VZ
280// Use standard C++ streams if 1 instead of wx streams in some places. If
281// disabled (default), wx streams are used everywhere and wxWidgets doesn't
282// depend on the standard streams library.
283//
284// Notice that enabling this does not replace wx streams with std streams
285// everywhere, in a lot of places wx streams are used no matter what.
286//
287// Default is 0
288//
289// Recommended setting: 1 if you use the standard streams anyhow and so
290// dependency on the standard streams library is not a
291// problem
bb445ba7 292#define wxUSE_STD_IOSTREAM wxUSE_STD_DEFAULT
b63269ca 293
5d7836c4 294// Enable conversion to standard C++ string if 1.
8bb9d852
MW
295//
296// Default is 1 for most compilers.
297//
bb445ba7
VZ
298// Recommended setting: 1 unless you want to ensure your program doesn't use
299// the standard C++ library at all.
300#define wxUSE_STD_STRING wxUSE_STD_DEFAULT
b63269ca 301
7a828c7f
VZ
302// Support for positional parameters (e.g. %1$d, %2$s ...) in wxVsnprintf.
303// Note that if the system's implementation does not support positional
304// parameters, setting this to 1 forces the use of the wxWidgets implementation
305// of wxVsnprintf. The standard vsnprintf() supports positional parameters on
306// many Unix systems but usually doesn't under Windows.
307//
308// Positional parameters are very useful when translating a program since using
309// them in formatting strings allow translators to correctly reorder the
310// translated sentences.
311//
312// Default is 1
313//
314// Recommended setting: 1 if you want to support multiple languages
7b4eedf6 315#define wxUSE_PRINTF_POS_PARAMS 1
7a828c7f 316
b63269ca
WS
317// ----------------------------------------------------------------------------
318// non GUI features selection
319// ----------------------------------------------------------------------------
320
321// Set wxUSE_LONGLONG to 1 to compile the wxLongLong class. This is a 64 bit
322// integer which is implemented in terms of native 64 bit integers if any or
323// uses emulation otherwise.
324//
325// This class is required by wxDateTime and so you should enable it if you want
326// to use wxDateTime. For most modern platforms, it will use the native 64 bit
327// integers in which case (almost) all of its functions are inline and it
328// almost does not take any space, so there should be no reason to switch it
329// off.
330//
331// Recommended setting: 1
332#define wxUSE_LONGLONG 1
333
4db03d26
VZ
334// Set wxUSE_BASE64 to 1, to compile in Base64 support. This is required for
335// storing binary data in wxConfig on most platforms.
336//
337// Default is 1.
338//
339// Recommended setting: 1 (but can be safely disabled if you don't use it)
340#define wxUSE_BASE64 1
341
a1873279
VZ
342// Set this to 1 to be able to use wxEventLoop even in console applications
343// (i.e. using base library only, without GUI). This is mostly useful for
344// processing socket events but is also necessary to use timers in console
345// applications
346//
347// Default is 1.
348//
349// Recommended setting: 1 (but can be safely disabled if you don't use it)
350#define wxUSE_CONSOLE_EVENTLOOP 1
351
b63269ca
WS
352// Set wxUSE_(F)FILE to 1 to compile wx(F)File classes. wxFile uses low level
353// POSIX functions for file access, wxFFile uses ANSI C stdio.h functions.
354//
355// Default is 1
356//
357// Recommended setting: 1 (wxFile is highly recommended as it is required by
358// i18n code, wxFileConfig and others)
359#define wxUSE_FILE 1
360#define wxUSE_FFILE 1
361
362// Use wxFSVolume class providing access to the configured/active mount points
363//
364// Default is 1
365//
366// Recommended setting: 1 (but may be safely disabled if you don't use it)
367#define wxUSE_FSVOLUME 1
368
369// Use wxStandardPaths class which allows to retrieve some standard locations
370// in the file system
371//
372// Default is 1
373//
374// Recommended setting: 1 (may be disabled to save space, but not much)
375#define wxUSE_STDPATHS 1
376
377// use wxTextBuffer class: required by wxTextFile
378#define wxUSE_TEXTBUFFER 1
379
380// use wxTextFile class: requires wxFile and wxTextBuffer, required by
381// wxFileConfig
382#define wxUSE_TEXTFILE 1
383
384// i18n support: _() macro, wxLocale class. Requires wxTextFile.
385#define wxUSE_INTL 1
386
6e4ae332
VZ
387// Provide wxFoo_l() functions similar to standard foo() functions but taking
388// an extra locale parameter.
389//
390// Notice that this is fully implemented only for the systems providing POSIX
391// xlocale support or Microsoft Visual C++ >= 8 (which provides proprietary
392// almost-equivalent of xlocale functions), otherwise wxFoo_l() functions will
393// only work for the current user locale and "C" locale. You can use
394// wxHAS_XLOCALE_SUPPORT to test whether the full support is available.
395//
396// Default is 1
397//
398// Recommended setting: 1 but may be disabled if you are writing programs
399// running only in C locale anyhow
400#define wxUSE_XLOCALE 1
401
b63269ca
WS
402// Set wxUSE_DATETIME to 1 to compile the wxDateTime and related classes which
403// allow to manipulate dates, times and time intervals. wxDateTime replaces the
404// old wxTime and wxDate classes which are still provided for backwards
405// compatibility (and implemented in terms of wxDateTime).
406//
407// Note that this class is relatively new and is still officially in alpha
408// stage because some features are not yet (fully) implemented. It is already
409// quite useful though and should only be disabled if you are aiming at
410// absolutely minimal version of the library.
411//
412// Requires: wxUSE_LONGLONG
413//
414// Default is 1
415//
416// Recommended setting: 1
417#define wxUSE_DATETIME 1
418
419// Set wxUSE_TIMER to 1 to compile wxTimer class
420//
421// Default is 1
422//
423// Recommended setting: 1
424#define wxUSE_TIMER 1
425
426// Use wxStopWatch clas.
427//
428// Default is 1
429//
430// Recommended setting: 1 (needed by wxSocket)
431#define wxUSE_STOPWATCH 1
432
6b8ef0b3
VZ
433// Set wxUSE_FSWATCHER to 1 if you want to enable wxFileSystemWatcher
434//
435// Default is 1
436//
437// Recommended setting: 1
438#define wxUSE_FSWATCHER 1
439
b63269ca
WS
440// Setting wxUSE_CONFIG to 1 enables the use of wxConfig and related classes
441// which allow the application to store its settings in the persistent
442// storage. Setting this to 1 will also enable on-demand creation of the
443// global config object in wxApp.
444//
445// See also wxUSE_CONFIG_NATIVE below.
446//
447// Recommended setting: 1
448#define wxUSE_CONFIG 1
449
450// If wxUSE_CONFIG is 1, you may choose to use either the native config
451// classes under Windows (using .INI files under Win16 and the registry under
452// Win32) or the portable text file format used by the config classes under
453// Unix.
454//
455// Default is 1 to use native classes. Note that you may still use
456// wxFileConfig even if you set this to 1 - just the config object created by
457// default for the applications needs will be a wxRegConfig or wxIniConfig and
458// not wxFileConfig.
459//
460// Recommended setting: 1
461#define wxUSE_CONFIG_NATIVE 1
462
463// If wxUSE_DIALUP_MANAGER is 1, compile in wxDialUpManager class which allows
464// to connect/disconnect from the network and be notified whenever the dial-up
465// network connection is established/terminated. Requires wxUSE_DYNAMIC_LOADER.
466//
467// Default is 1.
468//
469// Recommended setting: 1
470#define wxUSE_DIALUP_MANAGER 1
471
472// Compile in classes for run-time DLL loading and function calling.
473// Required by wxUSE_DIALUP_MANAGER.
474//
475// This setting is for Win32 only
476//
477// Default is 1.
478//
479// Recommended setting: 1
480#define wxUSE_DYNLIB_CLASS 1
481
482// experimental, don't use for now
483#define wxUSE_DYNAMIC_LOADER 1
484
485// Set to 1 to use socket classes
486#define wxUSE_SOCKETS 1
487
8575ff50
VZ
488// Set to 1 to use ipv6 socket classes (requires wxUSE_SOCKETS)
489//
490// Notice that currently setting this option under Windows will result in
491// programs which can only run on recent OS versions (with ws2_32.dll
492// installed) which is why it is disabled by default.
493//
494// Default is 1.
495//
496// Recommended setting: 1 if you need IPv6 support
497#define wxUSE_IPV6 0
498
b63269ca
WS
499// Set to 1 to enable virtual file systems (required by wxHTML)
500#define wxUSE_FILESYSTEM 1
501
502// Set to 1 to enable virtual ZIP filesystem (requires wxUSE_FILESYSTEM)
503#define wxUSE_FS_ZIP 1
504
26e422a9
MW
505// Set to 1 to enable virtual archive filesystem (requires wxUSE_FILESYSTEM)
506#define wxUSE_FS_ARCHIVE 1
507
b63269ca
WS
508// Set to 1 to enable virtual Internet filesystem (requires wxUSE_FILESYSTEM)
509#define wxUSE_FS_INET 1
510
511// wxArchive classes for accessing archives such as zip and tar
512#define wxUSE_ARCHIVE_STREAMS 1
513
514// Set to 1 to compile wxZipInput/OutputStream classes.
515#define wxUSE_ZIPSTREAM 1
516
26e422a9
MW
517// Set to 1 to compile wxTarInput/OutputStream classes.
518#define wxUSE_TARSTREAM 1
519
b63269ca
WS
520// Set to 1 to compile wxZlibInput/OutputStream classes. Also required by
521// wxUSE_LIBPNG
522#define wxUSE_ZLIB 1
523
524// If enabled, the code written by Apple will be used to write, in a portable
525// way, float on the disk. See extended.c for the license which is different
526// from wxWidgets one.
527//
528// Default is 1.
529//
530// Recommended setting: 1 unless you don't like the license terms (unlikely)
531#define wxUSE_APPLE_IEEE 1
532
533// Joystick support class
534#define wxUSE_JOYSTICK 1
535
ff427585
VZ
536// wxFontEnumerator class
537#define wxUSE_FONTENUM 1
538
b63269ca
WS
539// wxFontMapper class
540#define wxUSE_FONTMAP 1
541
542// wxMimeTypesManager class
543#define wxUSE_MIMETYPE 1
544
545// wxProtocol and related classes: if you want to use either of wxFTP, wxHTTP
546// or wxURL you need to set this to 1.
547//
548// Default is 1.
549//
550// Recommended setting: 1
551#define wxUSE_PROTOCOL 1
552
553// The settings for the individual URL schemes
554#define wxUSE_PROTOCOL_FILE 1
555#define wxUSE_PROTOCOL_FTP 1
556#define wxUSE_PROTOCOL_HTTP 1
557
558// Define this to use wxURL class.
559#define wxUSE_URL 1
560
561// Define this to use native platform url and protocol support.
562// Currently valid only for MS-Windows.
563// Note: if you set this to 1, you can open ftp/http/gopher sites
564// and obtain a valid input stream for these sites
565// even when you set wxUSE_PROTOCOL_FTP/HTTP to 0.
566// Doing so reduces the code size.
567//
568// This code is experimental and subject to change.
569#define wxUSE_URL_NATIVE 0
570
ca5c6ac3
VZ
571// Support for wxVariant class used in several places throughout the library,
572// notably in wxDataViewCtrl API.
573//
574// Default is 1.
575//
576// Recommended setting: 1 unless you want to reduce the library size as much as
577// possible in which case setting this to 0 can gain up to 100KB.
578#define wxUSE_VARIANT 1
579
178c7760
JS
580// Support for wxAny class, the successor for wxVariant.
581//
582// Default is 1.
583//
584// Recommended setting: 1 unless you want to reduce the library size by a small amount,
585// or your compiler cannot for some reason cope with complexity of templates used.
586#define wxUSE_ANY 1
587
b63269ca
WS
588// Support for regular expression matching via wxRegEx class: enable this to
589// use POSIX regular expressions in your code. You need to compile regex
590// library from src/regex to use it under Windows.
591//
592// Default is 0
593//
594// Recommended setting: 1 if your compiler supports it, if it doesn't please
595// contribute us a makefile for src/regex for it
596#define wxUSE_REGEX 1
597
598// wxSystemOptions class
599#define wxUSE_SYSTEM_OPTIONS 1
600
601// wxSound class
602#define wxUSE_SOUND 1
603
604// Use wxMediaCtrl
605//
606// Default is 1.
607//
912c3932 608// Recommended setting: 1
b63269ca
WS
609#define wxUSE_MEDIACTRL 1
610
b63269ca
WS
611// Use wxWidget's XRC XML-based resource system. Recommended.
612//
613// Default is 1
614//
615// Recommended setting: 1 (requires wxUSE_XML)
616#define wxUSE_XRC 1
617
618// XML parsing classes. Note that their API will change in the future, so
619// using wxXmlDocument and wxXmlNode in your app is not recommended.
620//
a0680daf 621// Default is the same as wxUSE_XRC, i.e. 1 by default.
b63269ca
WS
622//
623// Recommended setting: 1 (required by XRC)
a0680daf 624#define wxUSE_XML wxUSE_XRC
b63269ca 625
3a745867
WS
626// Use wxWidget's AUI docking system
627//
628// Default is 1
629//
630// Recommended setting: 1
631#define wxUSE_AUI 1
632
3c3ead1d
PC
633// Use wxWidget's Ribbon classes for interfaces
634//
635// Default is 1
636//
637// Recommended setting: 1
638#define wxUSE_RIBBON 1
639
1c4293cb
VZ
640// Use wxPropertyGrid.
641//
642// Default is 1
643//
644// Recommended setting: 1
645#define wxUSE_PROPGRID 1
646
29825f5f
PC
647// Use wxStyledTextCtrl, a wxWidgets implementation of Scintilla.
648//
649// Default is 1
650//
651// Recommended setting: 1
652#define wxUSE_STC 1
653
f43426c1
RD
654
655// Enable the new wxGraphicsPath and wxGraphicsContext classes for an advanced
656// 2D drawing API. (Still somewhat experimental)
657//
a12bd55b
VZ
658// Please note that on Windows gdiplus.dll is loaded dynamically which means
659// that nothing special needs to be done as long as you don't use
660// wxGraphicsContext at all or only use it on XP and later systems but you
661// still do need to distribute it yourself for an application using
662// wxGraphicsContext to be runnable on pre-XP systems.
e88f6524 663//
cde23b64
VZ
664// Default is 1 except if you're using a non-Microsoft compiler under Windows
665// as only MSVC7+ is known to ship with gdiplus.h. For other compilers (e.g.
666// mingw32) you may need to install the headers (and just the headers)
667// yourself. If you do, change the setting below manually.
f43426c1 668//
961f4d0c
VZ
669// Recommended setting: 1 if supported by the compilation environment
670
671// notice that we can't use wxCHECK_VISUALC_VERSION() here as this file is
672// included from wx/platform.h before wxCHECK_VISUALC_VERSION() is defined
673#ifdef _MSC_VER
cc16513e
VZ
674# if _MSC_VER >= 1310
675 // MSVC7.1+ comes with new enough Platform SDK, enable
676 // wxGraphicsContext support for it
961f4d0c
VZ
677# define wxUSE_GRAPHICS_CONTEXT 1
678# else
679 // MSVC 6 didn't include GDI+ headers so disable by default, enable it
680 // here if you use MSVC 6 with a newer SDK
681# define wxUSE_GRAPHICS_CONTEXT 0
682# endif
cde23b64 683#else
961f4d0c
VZ
684 // Disable support for other Windows compilers, enable it if your compiler
685 // comes with new enough SDK or you installed the headers manually.
686 //
687 // Notice that this will be set by configure under non-Windows platforms
688 // anyhow so the value there is not important.
689# define wxUSE_GRAPHICS_CONTEXT 0
cde23b64 690#endif
f43426c1 691
711a4812
VZ
692// Enable wxGraphicsContext implementation using Cairo library.
693//
694// This is not needed under Windows and detected automatically by configure
695// under other systems, however you may set this to 1 manually if you installed
696// Cairo under Windows yourself and prefer to use it instead the native GDI+
697// implementation.
698//
699// Default is 0
700//
701// Recommended setting: 0
702#define wxUSE_CAIRO 0
703
704
b63269ca
WS
705// ----------------------------------------------------------------------------
706// Individual GUI controls
707// ----------------------------------------------------------------------------
708
709// You must set wxUSE_CONTROLS to 1 if you are using any controls at all
710// (without it, wxControl class is not compiled)
711//
712// Default is 1
713//
714// Recommended setting: 1 (don't change except for very special programs)
715#define wxUSE_CONTROLS 1
716
717// wxPopupWindow class is a top level transient window. It is currently used
718// to implement wxTipWindow
719//
720// Default is 1
721//
722// Recommended setting: 1 (may be set to 0 if you don't wxUSE_TIPWINDOW)
723#define wxUSE_POPUPWIN 1
724
725// wxTipWindow allows to implement the custom tooltips, it is used by the
726// context help classes. Requires wxUSE_POPUPWIN.
727//
728// Default is 1
729//
730// Recommended setting: 1 (may be set to 0)
731#define wxUSE_TIPWINDOW 1
732
733// Each of the settings below corresponds to one wxWidgets control. They are
734// all switched on by default but may be disabled if you are sure that your
735// program (including any standard dialogs it can show!) doesn't need them and
736// if you desperately want to save some space. If you use any of these you must
737// set wxUSE_CONTROLS as well.
738//
739// Default is 1
740//
741// Recommended setting: 1
72045d57 742#define wxUSE_ANIMATIONCTRL 1 // wxAnimationCtrl
17e91437
VZ
743#define wxUSE_BUTTON 1 // wxButton
744#define wxUSE_BMPBUTTON 1 // wxBitmapButton
745#define wxUSE_CALENDARCTRL 1 // wxCalendarCtrl
746#define wxUSE_CHECKBOX 1 // wxCheckBox
747#define wxUSE_CHECKLISTBOX 1 // wxCheckListBox (requires wxUSE_OWNER_DRAWN)
748#define wxUSE_CHOICE 1 // wxChoice
912c3932 749#define wxUSE_COLLPANE 1 // wxCollapsiblePane
ec376c8f 750#define wxUSE_COLOURPICKERCTRL 1 // wxColourPickerCtrl
17e91437 751#define wxUSE_COMBOBOX 1 // wxComboBox
3571e1ad 752#define wxUSE_COMMANDLINKBUTTON 1 // wxCommandLinkButton
17e91437
VZ
753#define wxUSE_DATAVIEWCTRL 1 // wxDataViewCtrl
754#define wxUSE_DATEPICKCTRL 1 // wxDatePickerCtrl
ec376c8f 755#define wxUSE_DIRPICKERCTRL 1 // wxDirPickerCtrl
56eeb973 756#define wxUSE_EDITABLELISTBOX 1 // wxEditableListBox
0cf3e587 757#define wxUSE_FILECTRL 1 // wxFileCtrl
ec376c8f
VZ
758#define wxUSE_FILEPICKERCTRL 1 // wxFilePickerCtrl
759#define wxUSE_FONTPICKERCTRL 1 // wxFontPickerCtrl
17e91437 760#define wxUSE_GAUGE 1 // wxGauge
e721a2a2 761#define wxUSE_HEADERCTRL 1 // wxHeaderCtrl
17e91437
VZ
762#define wxUSE_HYPERLINKCTRL 1 // wxHyperlinkCtrl
763#define wxUSE_LISTBOX 1 // wxListBox
764#define wxUSE_LISTCTRL 1 // wxListCtrl
765#define wxUSE_RADIOBOX 1 // wxRadioBox
766#define wxUSE_RADIOBTN 1 // wxRadioButton
a1bdd4ab 767#define wxUSE_RICHMSGDLG 1 // wxRichMessageDialog
17e91437 768#define wxUSE_SCROLLBAR 1 // wxScrollBar
3f7f284d 769#define wxUSE_SEARCHCTRL 1 // wxSearchCtrl
17e91437
VZ
770#define wxUSE_SLIDER 1 // wxSlider
771#define wxUSE_SPINBTN 1 // wxSpinButton
772#define wxUSE_SPINCTRL 1 // wxSpinCtrl
773#define wxUSE_STATBOX 1 // wxStaticBox
774#define wxUSE_STATLINE 1 // wxStaticLine
775#define wxUSE_STATTEXT 1 // wxStaticText
776#define wxUSE_STATBMP 1 // wxStaticBitmap
777#define wxUSE_TEXTCTRL 1 // wxTextCtrl
778#define wxUSE_TOGGLEBTN 1 // requires wxButton
779#define wxUSE_TREECTRL 1 // wxTreeCtrl
b63269ca
WS
780
781// Use a status bar class? Depending on the value of wxUSE_NATIVE_STATUSBAR
782// below either wxStatusBar95 or a generic wxStatusBar will be used.
783//
784// Default is 1
785//
786// Recommended setting: 1
787#define wxUSE_STATUSBAR 1
788
789// Two status bar implementations are available under Win32: the generic one
790// or the wrapper around native control. For native look and feel the native
791// version should be used.
792//
793// Default is 1 for the platforms where native status bar is supported.
794//
795// Recommended setting: 1 (there is no advantage in using the generic one)
796#define wxUSE_NATIVE_STATUSBAR 1
797
798// wxToolBar related settings: if wxUSE_TOOLBAR is 0, don't compile any toolbar
799// classes at all. Otherwise, use the native toolbar class unless
800// wxUSE_TOOLBAR_NATIVE is 0.
801//
802// Default is 1 for all settings.
803//
804// Recommended setting: 1 for wxUSE_TOOLBAR and wxUSE_TOOLBAR_NATIVE.
805#define wxUSE_TOOLBAR 1
806#define wxUSE_TOOLBAR_NATIVE 1
807
808// wxNotebook is a control with several "tabs" located on one of its sides. It
809// may be used to logically organise the data presented to the user instead of
810// putting everything in one huge dialog. It replaces wxTabControl and related
811// classes of wxWin 1.6x.
812//
813// Default is 1.
814//
815// Recommended setting: 1
816#define wxUSE_NOTEBOOK 1
817
818// wxListbook control is similar to wxNotebook but uses wxListCtrl instead of
819// the tabs
820//
821// Default is 1.
822//
823// Recommended setting: 1
824#define wxUSE_LISTBOOK 1
825
826// wxChoicebook control is similar to wxNotebook but uses wxChoice instead of
827// the tabs
828//
829// Default is 1.
830//
831// Recommended setting: 1
832#define wxUSE_CHOICEBOOK 1
833
5d7836c4
JS
834// wxTreebook control is similar to wxNotebook but uses wxTreeCtrl instead of
835// the tabs
836//
837// Default is 1.
838//
839// Recommended setting: 1
840#define wxUSE_TREEBOOK 1
841
5f2c545c
VZ
842// wxToolbook control is similar to wxNotebook but uses wxToolBar instead of
843// tabs
844//
845// Default is 1.
846//
847// Recommended setting: 1
848#define wxUSE_TOOLBOOK 1
849
4f167b46
VZ
850// wxTaskBarIcon is a small notification icon shown in the system toolbar or
851// dock.
852//
853// Default is 1.
854//
855// Recommended setting: 1 (but can be set to 0 if you don't need it)
856#define wxUSE_TASKBARICON 1
857
b63269ca
WS
858// wxGrid class
859//
860// Default is 1, set to 0 to cut down compilation time and binaries size if you
861// don't use it.
862//
863// Recommended setting: 1
864//
865#define wxUSE_GRID 1
866
867// wxMiniFrame class: a frame with narrow title bar
868//
869// Default is 1.
870//
871// Recommended setting: 1 (it doesn't cost almost anything)
872#define wxUSE_MINIFRAME 1
873
a57d600f 874// wxComboCtrl and related classes: combobox with custom popup window and
21849f3a
VZ
875// not necessarily a listbox.
876//
877// Default is 1.
878//
879// Recommended setting: 1 but can be safely set to 0 except for wxUniv where it
880// it used by wxComboBox
a57d600f 881#define wxUSE_COMBOCTRL 1
21849f3a
VZ
882
883// wxOwnerDrawnComboBox is a custom combobox allowing to paint the combobox
884// items.
885//
886// Default is 1.
887//
95a46303
RR
888// Recommended setting: 1 but can be safely set to 0, except where it is
889// needed as a base class for generic wxBitmapComboBox.
a57d600f 890#define wxUSE_ODCOMBOBOX 1
21849f3a 891
95a46303
RR
892// wxBitmapComboBox is a combobox that can have images in front of text items.
893//
894// Default is 1.
895//
896// Recommended setting: 1 but can be safely set to 0
897#define wxUSE_BITMAPCOMBOBOX 1
898
f0bb342f
VZ
899// wxRearrangeCtrl is a wxCheckListBox with two buttons allowing to move items
900// up and down in it. It is also used as part of wxRearrangeDialog.
901//
902// Default is 1.
903//
904// Recommended setting: 1 but can be safely set to 0 (currently used only by
905// wxHeaderCtrl)
906#define wxUSE_REARRANGECTRL 1
907
b63269ca
WS
908// ----------------------------------------------------------------------------
909// Miscellaneous GUI stuff
910// ----------------------------------------------------------------------------
911
912// wxAcceleratorTable/Entry classes and support for them in wxMenu(Bar)
913#define wxUSE_ACCEL 1
914
915// Hotkey support (currently Windows only)
916#define wxUSE_HOTKEY 1
917
918// Use wxCaret: a class implementing a "cursor" in a text control (called caret
919// under Windows).
920//
921// Default is 1.
922//
923// Recommended setting: 1 (can be safely set to 0, not used by the library)
924#define wxUSE_CARET 1
925
926// Use wxDisplay class: it allows enumerating all displays on a system and
5f2c545c
VZ
927// their geometries as well as finding the display on which the given point or
928// window lies.
b63269ca 929//
5f2c545c 930// Default is 1.
b63269ca
WS
931//
932// Recommended setting: 1 if you need it, can be safely set to 0 otherwise
5f2c545c 933#define wxUSE_DISPLAY 1
b63269ca
WS
934
935// Miscellaneous geometry code: needed for Canvas library
936#define wxUSE_GEOMETRY 1
937
938// Use wxImageList. This class is needed by wxNotebook, wxTreeCtrl and
939// wxListCtrl.
940//
941// Default is 1.
942//
943// Recommended setting: 1 (set it to 0 if you don't use any of the controls
944// enumerated above, then this class is mostly useless too)
945#define wxUSE_IMAGLIST 1
946
a92b5dfe
VZ
947// Use wxInfoBar class.
948//
949// Default is 1.
950//
951// Recommended setting: 1 (but can be disabled without problems as nothing
952// depends on it)
953#define wxUSE_INFOBAR 1
954
b63269ca
WS
955// Use wxMenu, wxMenuBar, wxMenuItem.
956//
957// Default is 1.
958//
959// Recommended setting: 1 (can't be disabled under MSW)
960#define wxUSE_MENUS 1
961
e36a1739
VZ
962// Use wxNotificationMessage.
963//
964// wxNotificationMessage allows to show non-intrusive messages to the user
965// using balloons, banners, popups or whatever is the appropriate method for
966// the current platform.
967//
968// Default is 1.
969//
970// Recommended setting: 1
971#define wxUSE_NOTIFICATION_MESSAGE 1
972
b63269ca
WS
973// Use wxSashWindow class.
974//
975// Default is 1.
976//
977// Recommended setting: 1
978#define wxUSE_SASH 1
979
980// Use wxSplitterWindow class.
981//
982// Default is 1.
983//
984// Recommended setting: 1
985#define wxUSE_SPLITTER 1
986
987// Use wxToolTip and wxWindow::Set/GetToolTip() methods.
988//
989// Default is 1.
990//
991// Recommended setting: 1
992#define wxUSE_TOOLTIPS 1
993
994// wxValidator class and related methods
995#define wxUSE_VALIDATORS 1
996
cf2810aa
VZ
997// Use reference counted ID management: this means that wxWidgets will track
998// the automatically allocated ids (those used when you use wxID_ANY when
999// creating a window, menu or toolbar item &c) instead of just supposing that
1000// the program never runs out of them. This is mostly useful only under wxMSW
1001// where the total ids range is limited to SHRT_MIN..SHRT_MAX and where
1002// long-running programs can run into problems with ids reuse without this. On
1003// the other platforms, where the ids have the full int range, this shouldn't
1004// be necessary.
75a29ef1
VZ
1005#ifdef __WXMSW__
1006#define wxUSE_AUTOID_MANAGEMENT 1
1007#else
1008#define wxUSE_AUTOID_MANAGEMENT 0
1009#endif
cf2810aa 1010
b63269ca
WS
1011// ----------------------------------------------------------------------------
1012// common dialogs
1013// ----------------------------------------------------------------------------
1014
1015// On rare occasions (e.g. using DJGPP) may want to omit common dialogs (e.g.
1016// file selector, printer dialog). Switching this off also switches off the
1017// printing architecture and interactive wxPrinterDC.
1018//
1019// Default is 1
1020//
1021// Recommended setting: 1 (unless it really doesn't work)
1022#define wxUSE_COMMON_DIALOGS 1
1023
1024// wxBusyInfo displays window with message when app is busy. Works in same way
1025// as wxBusyCursor
1026#define wxUSE_BUSYINFO 1
1027
1028// Use single/multiple choice dialogs.
1029//
1030// Default is 1
1031//
1032// Recommended setting: 1 (used in the library itself)
1033#define wxUSE_CHOICEDLG 1
1034
1035// Use colour picker dialog
1036//
1037// Default is 1
1038//
1039// Recommended setting: 1
1040#define wxUSE_COLOURDLG 1
1041
1042// wxDirDlg class for getting a directory name from user
5d7836c4 1043#define wxUSE_DIRDLG 1
b63269ca
WS
1044
1045// TODO: setting to choose the generic or native one
1046
1047// Use file open/save dialogs.
1048//
1049// Default is 1
1050//
1051// Recommended setting: 1 (used in many places in the library itself)
5d7836c4 1052#define wxUSE_FILEDLG 1
b63269ca
WS
1053
1054// Use find/replace dialogs.
1055//
1056// Default is 1
1057//
1058// Recommended setting: 1 (but may be safely set to 0)
1059#define wxUSE_FINDREPLDLG 1
1060
1061// Use font picker dialog
1062//
1063// Default is 1
1064//
1065// Recommended setting: 1 (used in the library itself)
1066#define wxUSE_FONTDLG 1
1067
1068// Use wxMessageDialog and wxMessageBox.
1069//
1070// Default is 1
1071//
1072// Recommended setting: 1 (used in the library itself)
1073#define wxUSE_MSGDLG 1
1074
1075// progress dialog class for lengthy operations
1076#define wxUSE_PROGRESSDLG 1
1077
1078// support for startup tips (wxShowTip &c)
1079#define wxUSE_STARTUP_TIPS 1
1080
1081// text entry dialog and wxGetTextFromUser function
1082#define wxUSE_TEXTDLG 1
1083
1084// number entry dialog
1085#define wxUSE_NUMBERDLG 1
1086
1087// splash screen class
1088#define wxUSE_SPLASH 1
1089
1090// wizards
1091#define wxUSE_WIZARDDLG 1
1092
9211cf3c
VZ
1093// Compile in wxAboutBox() function showing the standard "About" dialog.
1094//
1095// Default is 1
1096//
1097// Recommended setting: 1 but can be set to 0 to save some space if you don't
1098// use this function
1099#define wxUSE_ABOUTDLG 1
1100
a0219e45
VS
1101// wxFileHistory class
1102//
1103// Default is 1
1104//
1105// Recommended setting: 1
1106#define wxUSE_FILE_HISTORY 1
1107
b63269ca
WS
1108// ----------------------------------------------------------------------------
1109// Metafiles support
1110// ----------------------------------------------------------------------------
1111
1112// Windows supports the graphics format known as metafile which is, though not
1113// portable, is widely used under Windows and so is supported by wxWin (under
1114// Windows only, of course). Win16 (Win3.1) used the so-called "Window
1115// MetaFiles" or WMFs which were replaced with "Enhanced MetaFiles" or EMFs in
1116// Win32 (Win9x, NT, 2000). Both of these are supported in wxWin and, by
1117// default, WMFs will be used under Win16 and EMFs under Win32. This may be
1118// changed by setting wxUSE_WIN_METAFILES_ALWAYS to 1 and/or setting
1119// wxUSE_ENH_METAFILE to 0. You may also set wxUSE_METAFILE to 0 to not compile
1120// in any metafile related classes at all.
1121//
1122// Default is 1 for wxUSE_ENH_METAFILE and 0 for wxUSE_WIN_METAFILES_ALWAYS.
1123//
1124// Recommended setting: default or 0 for everything for portable programs.
1125#define wxUSE_METAFILE 1
1126#define wxUSE_ENH_METAFILE 1
1127#define wxUSE_WIN_METAFILES_ALWAYS 0
1128
1129// ----------------------------------------------------------------------------
1130// Big GUI components
1131// ----------------------------------------------------------------------------
1132
1133// Set to 0 to disable MDI support.
1134//
1135// Requires wxUSE_NOTEBOOK under platforms other than MSW.
1136//
1137// Default is 1.
1138//
1139// Recommended setting: 1, can be safely set to 0.
1140#define wxUSE_MDI 1
1141
1142// Set to 0 to disable document/view architecture
5d7836c4 1143#define wxUSE_DOC_VIEW_ARCHITECTURE 1
b63269ca
WS
1144
1145// Set to 0 to disable MDI document/view architecture
1146//
1147// Requires wxUSE_MDI && wxUSE_DOC_VIEW_ARCHITECTURE
5d7836c4 1148#define wxUSE_MDI_ARCHITECTURE 1
b63269ca
WS
1149
1150// Set to 0 to disable print/preview architecture code
5d7836c4 1151#define wxUSE_PRINTING_ARCHITECTURE 1
b63269ca
WS
1152
1153// wxHTML sublibrary allows to display HTML in wxWindow programs and much,
1154// much more.
1155//
1156// Default is 1.
1157//
1158// Recommended setting: 1 (wxHTML is great!), set to 0 if you want compile a
1159// smaller library.
1160#define wxUSE_HTML 1
1161
1162// Setting wxUSE_GLCANVAS to 1 enables OpenGL support. You need to have OpenGL
1163// headers and libraries to be able to compile the library with wxUSE_GLCANVAS
24f618ee
VZ
1164// set to 1 and, under Windows, also to add opengl32.lib and glu32.lib to the
1165// list of libraries used to link your application (although this is done
1166// implicitly for Microsoft Visual C++ users).
b63269ca 1167//
671683c4
VZ
1168// Default is 1 unless the compiler is known to ship without the necessary
1169// headers (Digital Mars) or the platform doesn't support OpenGL (Windows CE).
b63269ca 1170//
671683c4
VZ
1171// Recommended setting: 1 if you intend to use OpenGL, can be safely set to 0
1172// otherwise.
1173#define wxUSE_GLCANVAS 1
b63269ca 1174
5d7836c4
JS
1175// wxRichTextCtrl allows editing of styled text.
1176//
1177// Default is 1.
1178//
1179// Recommended setting: 1, set to 0 if you want compile a
1180// smaller library.
1181#define wxUSE_RICHTEXT 1
1182
b63269ca
WS
1183// ----------------------------------------------------------------------------
1184// Data transfer
1185// ----------------------------------------------------------------------------
1186
1187// Use wxClipboard class for clipboard copy/paste.
1188//
1189// Default is 1.
1190//
1191// Recommended setting: 1
5d7836c4 1192#define wxUSE_CLIPBOARD 1
b63269ca
WS
1193
1194// Use wxDataObject and related classes. Needed for clipboard and OLE drag and
1195// drop
1196//
1197// Default is 1.
1198//
1199// Recommended setting: 1
5d7836c4 1200#define wxUSE_DATAOBJ 1
b63269ca
WS
1201
1202// Use wxDropTarget and wxDropSource classes for drag and drop (this is
1203// different from "built in" drag and drop in wxTreeCtrl which is always
1204// available). Requires wxUSE_DATAOBJ.
1205//
1206// Default is 1.
1207//
1208// Recommended setting: 1
5d7836c4 1209#define wxUSE_DRAG_AND_DROP 1
b63269ca
WS
1210
1211// Use wxAccessible for enhanced and customisable accessibility.
1212// Depends on wxUSE_OLE.
1213//
1214// Default is 0.
1215//
1216// Recommended setting (at present): 0
1217#define wxUSE_ACCESSIBILITY 0
1218
1219// ----------------------------------------------------------------------------
1220// miscellaneous settings
1221// ----------------------------------------------------------------------------
1222
1223// wxSingleInstanceChecker class allows to verify at startup if another program
52e5cc35 1224// instance is running.
b63269ca
WS
1225//
1226// Default is 1
1227//
1228// Recommended setting: 1 (the class is tiny, disabling it won't save much
1229// space)
1230#define wxUSE_SNGLINST_CHECKER 1
1231
1232#define wxUSE_DRAGIMAGE 1
1233
1234#define wxUSE_IPC 1
1235 // 0 for no interprocess comms
1236#define wxUSE_HELP 1
1237 // 0 for no help facility
b63269ca 1238
f05b5b77
VZ
1239// Should we use MS HTML help for wxHelpController? If disabled, neither
1240// wxCHMHelpController nor wxBestHelpController are available.
1241//
a0680daf 1242// Default is 1 under MSW, 0 is always used for the other platforms.
f05b5b77
VZ
1243//
1244// Recommended setting: 1, only set to 0 if you have trouble compiling
1245// wxCHMHelpController (could be a problem with really ancient compilers)
1246#define wxUSE_MS_HTML_HELP 1
1247
1248
b63269ca 1249// Use wxHTML-based help controller?
5d7836c4 1250#define wxUSE_WXHTML_HELP 1
b63269ca 1251
b63269ca
WS
1252#define wxUSE_CONSTRAINTS 1
1253 // 0 for no window layout constraint system
1254
1255#define wxUSE_SPLINES 1
1256 // 0 for no splines
1257
1258#define wxUSE_MOUSEWHEEL 1
1259 // Include mouse wheel support
1260
9b7e0226 1261// Compile wxUIActionSimulator class?
571d991b 1262#define wxUSE_UIACTIONSIMULATOR 1
9b7e0226 1263
b63269ca 1264// ----------------------------------------------------------------------------
b0fc907f 1265// wxDC classes for various output formats
b63269ca
WS
1266// ----------------------------------------------------------------------------
1267
1268// Set to 1 for PostScript device context.
1269#define wxUSE_POSTSCRIPT 0
1270
1271// Set to 1 to use font metric files in GetTextExtent
1272#define wxUSE_AFM_FOR_POSTSCRIPT 1
1273
b0fc907f 1274// Set to 1 to compile in support for wxSVGFileDC, a wxDC subclass which allows
1c4293cb 1275// to create files in SVG (Scalable Vector Graphics) format.
b0fc907f
VZ
1276#define wxUSE_SVG 1
1277
b63269ca
WS
1278// ----------------------------------------------------------------------------
1279// other compiler (mis)features
1280// ----------------------------------------------------------------------------
1281
1282// Set this to 0 if your compiler can't cope with omission of prototype
1283// parameters.
1284//
1285// Default is 1.
1286//
1287// Recommended setting: 1 (should never need to set this to 0)
1288#define REMOVE_UNUSED_ARG 1
1289
1290// VC++ 4.2 and above allows <iostream> and <iostream.h> but you can't mix
396197cb 1291// them. Set this option to 1 to use <iostream.h>, 0 to use <iostream>.
b63269ca 1292//
396197cb
VZ
1293// Note that newer compilers (including VC++ 7.1 and later) don't support
1294// wxUSE_IOSTREAMH == 1 and so <iostream> will be used anyhow.
1295//
1296// Default is 0.
b63269ca 1297//
396197cb
VZ
1298// Recommended setting: 0, only set to 1 if you use a really old compiler
1299#define wxUSE_IOSTREAMH 0
b63269ca
WS
1300
1301// ----------------------------------------------------------------------------
1302// image format support
1303// ----------------------------------------------------------------------------
1304
1305// wxImage supports many different image formats which can be configured at
1306// compile-time. BMP is always supported, others are optional and can be safely
1307// disabled if you don't plan to use images in such format sometimes saving
1308// substantial amount of code in the final library.
1309//
1310// Some formats require an extra library which is included in wxWin sources
1311// which is mentioned if it is the case.
1312
1313// Set to 1 for wxImage support (recommended).
1314#define wxUSE_IMAGE 1
1315
1316// Set to 1 for PNG format support (requires libpng). Also requires wxUSE_ZLIB.
1317#define wxUSE_LIBPNG 1
1318
1319// Set to 1 for JPEG format support (requires libjpeg)
1320#define wxUSE_LIBJPEG 1
1321
1322// Set to 1 for TIFF format support (requires libtiff)
1323#define wxUSE_LIBTIFF 1
1324
3af706cc
VZ
1325// Set to 1 for TGA format support (loading only)
1326#define wxUSE_TGA 1
1327
b63269ca
WS
1328// Set to 1 for GIF format support
1329#define wxUSE_GIF 1
1330
1331// Set to 1 for PNM format support
1332#define wxUSE_PNM 1
1333
1334// Set to 1 for PCX format support
1335#define wxUSE_PCX 1
1336
1337// Set to 1 for IFF format support (Amiga format)
1338#define wxUSE_IFF 0
1339
1340// Set to 1 for XPM format support
1341#define wxUSE_XPM 1
1342
1343// Set to 1 for MS Icons and Cursors format support
1344#define wxUSE_ICO_CUR 1
1345
1346// Set to 1 to compile in wxPalette class
1347#define wxUSE_PALETTE 1
1348
4353a8df
VZ
1349// ----------------------------------------------------------------------------
1350// wxUniversal-only options
1351// ----------------------------------------------------------------------------
1352
1353// Set to 1 to enable compilation of all themes, this is the default
1354#define wxUSE_ALL_THEMES 1
1355
1356// Set to 1 to enable the compilation of individual theme if wxUSE_ALL_THEMES
1357// is unset, if it is set these options are not used; notice that metal theme
1358// uses Win32 one
1359#define wxUSE_THEME_GTK 0
1360#define wxUSE_THEME_METAL 0
1361#define wxUSE_THEME_MONO 0
1362#define wxUSE_THEME_WIN32 0
1363
1364
b63269ca
WS
1365/* --- end common options --- */
1366
ddfed775
SN
1367/*
1368 * Unix-specific options
1369 */
1370#define wxUSE_SELECT_DISPATCHER 1
1371#define wxUSE_EPOLL_DISPATCHER 0
1372
1373#define wxUSE_UNICODE_UTF8 0
1374#define wxUSE_UTF8_LOCALE_ONLY 0
1375
b63269ca 1376#endif // _WX_SETUP_H_