Added a "rpm" target so you can just do "make rpm" and it should do

[wxWidgets.git] / docs / latex / wx / strmfile.tex

% -----------------------------------------------------------------------------
% wxFileInputStream
% -----------------------------------------------------------------------------
\section{\class{wxFileInputStream}}\label{wxfileinputstream}

This class represents data read in from a file. There are actually
two such groups of classes: this one is based on \helpref{wxFile}{wxfile} 
whereas \helpref{wxFFileInputStream}{wxffileinputstream} is based in
the \helpref{wxFFile}{wxffile} class.

Note that \helpref{wxFile}{wxfile} and \helpref{wxFFile}{wxffile} differ
in one aspect, namely when to report that the end of the file has been
reached. This is documented in \helpref{wxFile::Eof}{wxfileeof} and 
\helpref{wxFFile::Eof}{wxffileeof} and the behaviour of the stream
classes reflects this difference, i.e. wxFileInputStream will report
wxSTREAM\_EOF after having read the last byte whereas wxFFileInputStream
will report wxSTREAM\_EOF after trying to read {\it past} the last byte.

\wxheading{Derived from}

\helpref{wxInputStream}{wxinputstream}

\wxheading{Include files}

<wx/wfstream.h>

\wxheading{See also}

\helpref{wxBufferedInputStream}{wxbufferedinputstream}, \helpref{wxFileOutputStream}{wxfileoutputstream}, \helpref{wxFFileOutputStream}{wxffileoutputstream}

% ----------
% Members
% ----------
\latexignore{\rtfignore{\wxheading{Members}}}

\membersection{wxFileInputStream::wxFileInputStream}

\func{}{wxFileInputStream}{\param{const wxString\&}{ ifileName}}

Opens the specified file using its {\it ifilename} name in read-only mode.

\func{}{wxFileInputStream}{\param{wxFile\&}{ file}}

Initializes a file stream in read-only mode using the file I/O object {\it file}.

\func{}{wxFileInputStream}{\param{int}{ fd}}

Initializes a file stream in read-only mode using the specified file descriptor.

\membersection{wxFileInputStream::\destruct{wxFileInputStream}}

\func{}{\destruct{wxFileInputStream}}{\void}

Destructor.

\membersection{wxFileInputStream::Ok}

\constfunc{bool}{Ok}{\void}

Returns TRUE if the stream is initialized and ready.

% -----------------------------------------------------------------------------
% wxFileOutputStream
% -----------------------------------------------------------------------------
\section{\class{wxFileOutputStream}}\label{wxfileoutputstream}

This class represents data written to a file. There are actually
two such groups of classes: this one is based on \helpref{wxFile}{wxfile} 
whereas \helpref{wxFFileInputStream}{wxffileinputstream} is based in
the \helpref{wxFFile}{wxffile} class.

Note that \helpref{wxFile}{wxfile} and \helpref{wxFFile}{wxffile} differ
in one aspect, namely when to report that the end of the file has been
reached. This is documented in \helpref{wxFile::Eof}{wxfileeof} and 
\helpref{wxFFile::Eof}{wxffileeof} and the behaviour of the stream
classes reflects this difference, i.e. wxFileInputStream will report
wxSTREAM\_EOF after having read the last byte whereas wxFFileInputStream
will report wxSTREAM\_EOF after trying to read {\it past} the last byte.

\wxheading{Derived from}

\helpref{wxOutputStream}{wxoutputstream}

\wxheading{Include files}

<wx/wfstream.h>

\wxheading{See also}

\helpref{wxBufferedOutputStream}{wxbufferedoutputstream}, \helpref{wxFileInputStream}{wxfileinputstream}, \helpref{wxFFileInputStream}{wxffileinputstream}

% ----------
% Members
% ----------
\latexignore{\rtfignore{\wxheading{Members}}}

\membersection{wxFileOutputStream::wxFileOutputStream}

\func{}{wxFileOutputStream}{\param{const wxString\&}{ ofileName}}

Creates a new file with {\it ofilename} name and initializes the stream in
write-only mode. 

\func{}{wxFileOutputStream}{\param{wxFile\&}{ file}}

Initializes a file stream in write-only mode using the file I/O object {\it file}.

\func{}{wxFileOutputStream}{\param{int}{ fd}}

Initializes a file stream in write-only mode using the file descriptor {\it fd}.

\membersection{wxFileOutputStream::\destruct{wxFileOutputStream}}

\func{}{\destruct{wxFileOutputStream}}{\void}

Destructor.

\membersection{wxFileOutputStream::Ok}

\constfunc{bool}{Ok}{\void}

Returns TRUE if the stream is initialized and ready.

% -----------------------------------------------------------------------------
% wxFileStream
% -----------------------------------------------------------------------------
\section{\class{wxFileStream}}

\wxheading{Derived from}

\helpref{wxFileOutputStream}{wxFileOutputStream}, \helpref{wxFileInputStream}{wxfileinputstream}

\wxheading{Include files}

<wx/wfstream.h>

\wxheading{See also}

\helpref{wxStreamBuffer}{wxstreamBuffer}

\latexignore{\rtfignore{\wxheading{Members}}}

\membersection{wxFileStream::wxFileStream}

\func{}{wxFileStream}{\param{const wxString\&}{ iofileName}}

Initializes a new file stream in read-write mode using the specified 
{\it iofilename} name.


% -----------------------------------------------------------------------------
% wxFFileInputStream
% -----------------------------------------------------------------------------
\section{\class{wxFFileInputStream}}\label{wxffileinputstream}

This class represents data read in from a file. There are actually
two such groups of classes: this one is based on \helpref{wxFFile}{wxffile} 
whereas \helpref{wxFileInputStream}{wxfileinputstream} is based in
the \helpref{wxFile}{wxfile} class.

Note that \helpref{wxFile}{wxfile} and \helpref{wxFFile}{wxffile} differ
in one aspect, namely when to report that the end of the file has been
reached. This is documented in \helpref{wxFile::Eof}{wxfileeof} and 
\helpref{wxFFile::Eof}{wxffileeof} and the behaviour of the stream
classes reflects this difference, i.e. wxFileInputStream will report
wxSTREAM\_EOF after having read the last byte whereas wxFFileInputStream
will report wxSTREAM\_EOF after trying to read {\it past} the last byte.

\wxheading{Derived from}

\helpref{wxInputStream}{wxinputstream}

\wxheading{Include files}

<wx/wfstream.h>

\wxheading{See also}

\helpref{wxBufferedInputStream}{wxbufferedinputstream}, \helpref{wxFFileOutputStream}{wxffileoutputstream}, \helpref{wxFileOutputStream}{wxfileoutputstream}

% ----------
% Members
% ----------
\latexignore{\rtfignore{\wxheading{Members}}}

\membersection{wxFFileInputStream::wxFFileInputStream}

\func{}{wxFFileInputStream}{\param{const wxString\&}{ ifileName}}

Opens the specified file using its {\it ifilename} name in read-only mode.

\func{}{wxFFileInputStream}{\param{wxFFile\&}{ file}}

Initializes a file stream in read-only mode using the file I/O object {\it file}.

\func{}{wxFFileInputStream}{\param{FILE *}{ fp}}

Initializes a file stream in read-only mode using the specified file pointer {\it fp}.

\membersection{wxFFileInputStream::\destruct{wxFFileInputStream}}

\func{}{\destruct{wxFFileInputStream}}{\void}

Destructor.

\membersection{wxFFileInputStream::Ok}

\constfunc{bool}{Ok}{\void}

Returns TRUE if the stream is initialized and ready.

% -----------------------------------------------------------------------------
% wxFFileOutputStream
% -----------------------------------------------------------------------------
\section{\class{wxFFileOutputStream}}\label{wxffileoutputstream}

This class represents data written to a file. There are actually
two such groups of classes: this one is based on \helpref{wxFFile}{wxffile} 
whereas \helpref{wxFileInputStream}{wxffileinputstream} is based in
the \helpref{wxFile}{wxfile} class.

Note that \helpref{wxFile}{wxfile} and \helpref{wxFFile}{wxffile} differ
in one aspect, namely when to report that the end of the file has been
reached. This is documented in \helpref{wxFile::Eof}{wxfileeof} and 
\helpref{wxFFile::Eof}{wxffileeof} and the behaviour of the stream
classes reflects this difference, i.e. wxFileInputStream will report
wxSTREAM\_EOF after having read the last byte whereas wxFFileInputStream
will report wxSTREAM\_EOF after trying to read {\it past} the last byte.

\wxheading{Derived from}

\helpref{wxOutputStream}{wxoutputstream}

\wxheading{Include files}

<wx/wfstream.h>

\wxheading{See also}

\helpref{wxBufferedOutputStream}{wxbufferedoutputstream}, \helpref{wxFFileInputStream}{wxffileinputstream}, \helpref{wxFileInputStream}{wxfileinputstream}

% ----------
% Members
% ----------
\latexignore{\rtfignore{\wxheading{Members}}}

\membersection{wxFFileOutputStream::wxFFileOutputStream}

\func{}{wxFFileOutputStream}{\param{const wxString\&}{ ofileName}}

Creates a new file with {\it ofilename} name and initializes the stream in
write-only mode. 

\func{}{wxFFileOutputStream}{\param{wxFFile\&}{ file}}

Initializes a file stream in write-only mode using the file I/O object {\it file}.

\func{}{wxFFileOutputStream}{\param{FILE *}{ fp}}

Initializes a file stream in write-only mode using the file descriptor {\it fp}.

\membersection{wxFFileOutputStream::\destruct{wxFFileOutputStream}}

\func{}{\destruct{wxFFileOutputStream}}{\void}

Destructor.

\membersection{wxFFileOutputStream::Ok}

\constfunc{bool}{Ok}{\void}

Returns TRUE if the stream is initialized and ready.

% -----------------------------------------------------------------------------
% wxFFileStream
% -----------------------------------------------------------------------------
\section{\class{wxFFileStream}}

\wxheading{Derived from}

\helpref{wxFFileOutputStream}{wxFFileOutputStream}, \helpref{wxFFileInputStream}{wxffileinputstream}

\wxheading{Include files}

<wx/wfstream.h>

\wxheading{See also}

\helpref{wxStreamBuffer}{wxstreamBuffer}

\latexignore{\rtfignore{\wxheading{Members}}}

\membersection{wxFFileStream::wxFFileStream}

\func{}{wxFFileStream}{\param{const wxString\&}{ iofileName}}

Initializes a new file stream in read-write mode using the specified 
{\it iofilename} name.