don't use _T() inside wxGetTranslation() and related macros (wxTRANSLATE, _, ......

[wxWidgets.git] / docs / latex / wx / file.tex

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% Name:        file.tex
%% Purpose:     wxFile documentation
%% Author:      Vadim Zeitlin
%% Modified by:
%% Created:     14.01.02 (extracted from file.tex)
%% RCS-ID:      $Id$
%% Copyright:   (c) Vadim Zeitlin
%% License:     wxWindows license
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

\section{\class{wxFile}}\label{wxfile}

A wxFile performs raw file I/O. This is a very small class designed to
minimize the overhead of using it - in fact, there is hardly any overhead at
all, but using it brings you automatic error checking and hides differences
between platforms and compilers. wxFile also automatically closes the file in
its destructor making it unnecessary to worry about forgetting to do it.
wxFile is a wrapper around {\tt file descriptor.} - see also 
\helpref{wxFFile}{wxffile} for a wrapper around {\tt FILE} structure.

{\tt wxFileOffset} is used by the wxFile functions which require offsets as 
parameter or return them. If the platform supports it, wxFileOffset is a typedef
for a native 64 bit integer, otherwise a 32 bit integer is used for wxFileOffset.

\wxheading{Derived from}

None.

\wxheading{Include files}

<wx/file.h>

\wxheading{Library}

\helpref{wxBase}{librarieslist}

\wxheading{Constants}

wx/file.h defines the following constants:

\begin{verbatim}
#define wxS_IRUSR 00400
#define wxS_IWUSR 00200
#define wxS_IXUSR 00100

#define wxS_IRGRP 00040
#define wxS_IWGRP 00020
#define wxS_IXGRP 00010

#define wxS_IROTH 00004
#define wxS_IWOTH 00002
#define wxS_IXOTH 00001

// default mode for the new files: corresponds to umask 022
#define wxS_DEFAULT  (wxS_IRUSR | wxS_IWUSR | wxS_IRGRP | wxS_IWGRP | wxS_IROTH | wxS_IWOTH)
\end{verbatim}

These constants define the file access rights and are used with 
\helpref{wxFile::Create}{wxfilecreate} and \helpref{wxFile::Open}{wxfileopen}.

The {\it OpenMode} enumeration defines the different modes for opening a file,
it is defined inside wxFile class so its members should be specified with {\it wxFile::} scope
resolution prefix. It is also used with \helpref{wxFile::Access}{wxfileaccess} function.

\twocolwidtha{7cm}
\begin{twocollist}\itemsep=0pt%
\twocolitem{{\bf wxFile::read}}{Open file for reading or test if it can be opened for reading with Access()}
\twocolitem{{\bf wxFile::write}}{Open file for writing deleting the contents of the file if it already exists
or test if it can be opened for writing with Access()}
\twocolitem{{\bf wxFile::read\_write}}{Open file for reading and writing; can not be used with Access()}
\twocolitem{{\bf wxFile::write\_append}}{Open file for appending: the file is opened for writing, but the old
contents of the file is not erased and the file pointer is initially placed at the end of the file;
can not be used with Access(). This is the same as {\bf wxFile::write} if the
file doesn't exist.}
\twocolitem{{\bf wxFile::write\_excl}}{Open the file securely for writing (Uses O\_EXCL | O\_CREAT).
Will fail if the file already exists, else create and open it atomically.  Useful for opening temporary files without being vulnerable to race exploits.}
\end{twocollist}

Other constants defined elsewhere but used by wxFile functions are wxInvalidOffset which represents an
invalid value of type {\it wxFileOffset} and is returned by functions returning {\it wxFileOffset} on error and the seek
mode constants used with \helpref{Seek()}{wxfileseek}:

\twocolwidtha{7cm}
\begin{twocollist}\itemsep=0pt%
\twocolitem{{\bf wxFromStart}}{Count offset from the start of the file}
\twocolitem{{\bf wxFromCurrent}}{Count offset from the current position of the file pointer}
\twocolitem{{\bf wxFromEnd}}{Count offset from the end of the file (backwards)}
\end{twocollist}

\latexignore{\rtfignore{\wxheading{Members}}}


\membersection{wxFile::wxFile}\label{wxfilector}

\func{}{wxFile}{\void}

Default constructor.

\func{}{wxFile}{\param{const wxString\&}{ filename}, \param{wxFile::OpenMode}{ mode = wxFile::read}}

Opens a file with the given mode. As there is no way to return whether the
operation was successful or not from the constructor you should test the
return value of \helpref{IsOpened}{wxfileisopened} to check that it didn't
fail.

\func{}{wxFile}{\param{int}{ fd}}

Associates the file with the given file descriptor, which has already been opened.

\wxheading{Parameters}

\docparam{filename}{The filename.}

\docparam{mode}{The mode in which to open the file. May be one of {\bf wxFile::read}, {\bf wxFile::write} and {\bf wxFile::read\_write}.}

\docparam{fd}{An existing file descriptor (see \helpref{Attach()}{wxfileattach} for the list of predefined descriptors)}


\membersection{wxFile::\destruct{wxFile}}\label{wxfiledtor}

\func{}{\destruct{wxFile}}{\void}

Destructor will close the file.

{\bf NB:} it is not virtual so you should not use wxFile polymorphically.


\membersection{wxFile::Access}\label{wxfileaccess}

\func{static bool}{Access}{\param{const wxString\&}{ name}, \param{OpenMode}{ mode}}

This function verifies if we may access the given file in specified mode. Only
values of wxFile::read or wxFile::write really make sense here.


\membersection{wxFile::Attach}\label{wxfileattach}

\func{void}{Attach}{\param{int}{ fd}}

Attaches an existing file descriptor to the wxFile object. Example of predefined
file descriptors are 0, 1 and 2 which correspond to stdin, stdout and stderr (and
have symbolic names of {\bf wxFile::fd\_stdin}, {\bf wxFile::fd\_stdout} and {\bf wxFile::fd\_stderr}).

The descriptor should be already opened and it will be closed by wxFile
object.


\membersection{wxFile::Close}\label{wxfileclose}

\func{void}{Close}{\void}

Closes the file.


\membersection{wxFile::Create}\label{wxfilecreate}

\func{bool}{Create}{\param{const wxString\&}{ filename}, \param{bool}{ overwrite = false}, \param{int }{access = wxS\_DEFAULT}}

Creates a file for writing. If the file already exists, setting {\bf overwrite} to true
will ensure it is overwritten.


\membersection{wxFile::Detach}\label{wxfiledetach}

\func{void}{Detach}{\void}

Get back a file descriptor from wxFile object - the caller is responsible for closing the file if this
descriptor is opened. \helpref{IsOpened()}{wxfileisopened} will return false after call to Detach().


\membersection{wxFile::fd}\label{wxfilefd}

\constfunc{int}{fd}{\void}

Returns the file descriptor associated with the file.


\membersection{wxFile::Eof}\label{wxfileeof}

\constfunc{bool}{Eof}{\void}

Returns true if the end of the file has been reached.

Note that the behaviour of the file pointer based class 
\helpref{wxFFile}{wxffile} is different as \helpref{wxFFile::Eof}{wxffileeof} 
will return true here only if an attempt has been made to read 
{\it past} the last byte of the file, while wxFile::Eof() will return true
even before such attempt is made if the file pointer is at the last position
in the file.

Note also that this function doesn't work on unseekable file descriptors
(examples include pipes, terminals and sockets under Unix) and an attempt to
use it will result in an error message in such case. So, to read the entire
file into memory, you should write a loop which uses 
\helpref{Read}{wxfileread} repeatedly and tests its return condition instead
of using Eof() as this will not work for special files under Unix.


\membersection{wxFile::Exists}\label{wxfileexists}

\func{static bool}{Exists}{\param{const wxString\&}{ filename}}

Returns true if the given name specifies an existing regular file (not a
directory or a link)


\membersection{wxFile::Flush}\label{wxfileflush}

\func{bool}{Flush}{\void}

Flushes the file descriptor.

Note that wxFile::Flush is not implemented on some Windows compilers
due to a missing fsync function, which reduces the usefulness of this function
(it can still be called but it will do nothing on unsupported compilers).


\membersection{wxFile::GetKind}\label{wxfilegetfilekind}

\constfunc{wxFileKind}{GetKind}{\void}

Returns the type of the file. Possible return values are:

\begin{verbatim}
enum wxFileKind
{
  wxFILE_KIND_UNKNOWN,
  wxFILE_KIND_DISK,     // a file supporting seeking to arbitrary offsets
  wxFILE_KIND_TERMINAL, // a tty
  wxFILE_KIND_PIPE      // a pipe
};

\end{verbatim}


\membersection{wxFile::IsOpened}\label{wxfileisopened}

\constfunc{bool}{IsOpened}{\void}

Returns true if the file has been opened.


\membersection{wxFile::Length}\label{wxfilelength}

\constfunc{wxFileOffset}{Length}{\void}

Returns the length of the file.


\membersection{wxFile::Open}\label{wxfileopen}

\func{bool}{Open}{\param{const wxString\&}{ filename}, \param{wxFile::OpenMode}{ mode = wxFile::read}}

Opens the file, returning true if successful.

\wxheading{Parameters}

\docparam{filename}{The filename.}

\docparam{mode}{The mode in which to open the file. May be one of {\bf wxFile::read}, {\bf wxFile::write} and {\bf wxFile::read\_write}.}


\membersection{wxFile::Read}\label{wxfileread}

\func{size\_t}{Read}{\param{void*}{ buffer}, \param{size\_t}{ count}}

Reads the specified number of bytes into a buffer, returning the actual number read.

\wxheading{Parameters}

\docparam{buffer}{A buffer to receive the data.}

\docparam{count}{The number of bytes to read.}

\wxheading{Return value}

The number of bytes read, or the symbol {\bf wxInvalidOffset} (-1) if there was an error.


\membersection{wxFile::Seek}\label{wxfileseek}

\func{wxFileOffset}{Seek}{\param{wxFileOffset }{ofs}, \param{wxSeekMode }{mode = wxFromStart}}

Seeks to the specified position.

\wxheading{Parameters}

\docparam{ofs}{Offset to seek to.}

\docparam{mode}{One of {\bf wxFromStart}, {\bf wxFromEnd}, {\bf wxFromCurrent}.}

\wxheading{Return value}

The actual offset position achieved, or wxInvalidOffset on failure.


\membersection{wxFile::SeekEnd}\label{wxfileseekend}

\func{wxFileOffset}{SeekEnd}{\param{wxFileOffset }{ofs = 0}}

Moves the file pointer to the specified number of bytes relative to the end of
the file. For example, \texttt{SeekEnd($-5$)} would position the pointer $5$
bytes before the end.

\wxheading{Parameters}

\docparam{ofs}{Number of bytes before the end of the file.}

\wxheading{Return value}

The actual offset position achieved, or wxInvalidOffset on failure.


\membersection{wxFile::Tell}\label{wxfiletell}

\constfunc{wxFileOffset}{Tell}{\void}

Returns the current position or wxInvalidOffset if file is not opened or if another
error occurred.


\membersection{wxFile::Write}\label{wxfilewrite}

\func{size\_t}{Write}{\param{const void*}{ buffer}, \param{size\_t}{ count}}

Writes the specified number of bytes from a buffer.

\wxheading{Parameters}

\docparam{buffer}{A buffer containing the data.}

\docparam{count}{The number of bytes to write.}

\wxheading{Return value}

the number of bytes actually written


\membersection{wxFile::Write}\label{wxfilewrites}

\func{bool}{Write}{\param{const wxString\& }{s}, \param{const wxMBConv\&}{ conv = wxConvUTF8}}

Writes the contents of the string to the file, returns true on success.

The second argument is only meaningful in Unicode build of wxWidgets when
{\it conv} is used to convert {\it s} to multibyte representation.

Note that this method only works with {\tt NUL}-terminated strings, if you want
to write data with embedded {\tt NUL}s to the file you should use the other 
\helpref{Write() overload}{wxfilewrite}.