#
# bind 127.0.0.1
-# Close the connection after a client is idle for N seconds
+# Close the connection after a client is idle for N seconds (0 to disable)
timeout 300
+# Set server verbosity to 'debug'
+# it can be one of:
+# debug (a lot of information, useful for development/testing)
+# notice (moderately verbose, what you want in production probably)
+# warning (only very important / critical messages are logged)
+loglevel debug
+
+# Specify the log file name. Also 'stdout' can be used to force
+# the demon to log on the standard output. Note that if you use standard
+# output for logging but daemonize, logs will be sent to /dev/null
+logfile stdout
+
+# Set the number of databases. The default database is DB 0, you can select
+# a different one on a per-connection basis using SELECT <dbid> where
+# dbid is a number between 0 and 'databases'-1
+databases 16
+
+################################ SNAPSHOTTING #################################
+#
# Save the DB on disk:
#
# save <seconds> <changes>
save 300 10
save 60 10000
+# Compress string objects using LZF when dump .rdb databases?
+# For default that's set to 'yes' as it's almost always a win.
+# If you want to save some CPU in the saving child set it to 'no' but
+# the dataset will likely be bigger if you have compressible values or keys.
+rdbcompression yes
+
+# The filename where to dump the DB
+dbfilename dump.rdb
+
# For default save/load DB in/from the working directory
# Note that you must specify a directory not a file name.
dir ./
-# Set server verbosity to 'debug'
-# it can be one of:
-# debug (a lot of information, useful for development/testing)
-# notice (moderately verbose, what you want in production probably)
-# warning (only very important / critical messages are logged)
-loglevel debug
-
-# Specify the log file name. Also 'stdout' can be used to force
-# the demon to log on the standard output. Note that if you use standard
-# output for logging but daemonize, logs will be sent to /dev/null
-logfile stdout
-
-# Set the number of databases.
-databases 16
-
################################# REPLICATION #################################
# Master-Slave replication. Use slaveof to make a Redis instance a copy of
# another Redis server. Note that the configuration is local to the slave
# so for example it is possible to configure the slave to save the DB with a
# different interval, or to listen to another port, and so on.
-
+#
# slaveof <masterip> <masterport>
+# If the master is password protected (using the "requirepass" configuration
+# directive below) it is possible to tell the slave to authenticate before
+# starting the replication synchronization process, otherwise the master will
+# refuse the slave request.
+#
+# masterauth <master-password>
+
################################## SECURITY ###################################
# Require clients to issue AUTH <PASSWORD> before processing any other
#
# This should stay commented out for backward compatibility and because most
# people do not need auth (e.g. they run their own servers).
+#
+# requirepass foobared
+
+################################### LIMITS ####################################
+
+# Set the max number of connected clients at the same time. By default there
+# is no limit, and it's up to the number of file descriptors the Redis process
+# is able to open. The special value '0' means no limts.
+# Once the limit is reached Redis will close all the new connections sending
+# an error 'max number of clients reached'.
+#
+# maxclients 128
-#requirepass foobared
+# Don't use more memory than the specified amount of bytes.
+# When the memory limit is reached Redis will try to remove keys with an
+# EXPIRE set. It will try to start freeing keys that are going to expire
+# in little time and preserve keys with a longer time to live.
+# Redis will also try to remove objects from free lists if possible.
+#
+# If all this fails, Redis will start to reply with errors to commands
+# that will use more memory, like SET, LPUSH, and so on, and will continue
+# to reply to most read-only commands like GET.
+#
+# WARNING: maxmemory can be a good idea mainly if you want to use Redis as a
+# 'state' server or cache, not as a real DB. When Redis is used as a real
+# database the memory usage will grow over the weeks, it will be obvious if
+# it is going to use too much memory in the long run, and you'll have the time
+# to upgrade. With maxmemory after the limit is reached you'll start to get
+# errors for write operations, and this may even lead to DB inconsistency.
+#
+# maxmemory <bytes>
+
+############################## APPEND ONLY MODE ###############################
+
+# By default Redis asynchronously dumps the dataset on disk. If you can live
+# with the idea that the latest records will be lost if something like a crash
+# happens this is the preferred way to run Redis. If instead you care a lot
+# about your data and don't want to that a single record can get lost you should
+# enable the append only mode: when this mode is enabled Redis will append
+# every write operation received in the file appendonly.log. This file will
+# be read on startup in order to rebuild the full dataset in memory.
+#
+# Note that you can have both the async dumps and the append only file if you
+# like (you have to comment the "save" statements above to disable the dumps).
+# Still if append only mode is enabled Redis will load the data from the
+# log file at startup ignoring the dump.rdb file.
+#
+# The name of the append only file is "appendonly.log"
+#
+# IMPORTANT: Check the BGREWRITEAOF to check how to rewrite the append
+# log file in background when it gets too big.
+
+appendonly no
+
+# The fsync() call tells the Operating System to actually write data on disk
+# instead to wait for more data in the output buffer. Some OS will really flush
+# data on disk, some other OS will just try to do it ASAP.
+#
+# Redis supports three different modes:
+#
+# no: don't fsync, just let the OS flush the data when it wants. Faster.
+# always: fsync after every write to the append only log . Slow, Safest.
+# everysec: fsync only if one second passed since the last fsync. Compromise.
+#
+# The default is "always" that's the safer of the options. It's up to you to
+# understand if you can relax this to "everysec" that will fsync every second
+# or to "no" that will let the operating system flush the output buffer when
+# it want, for better performances (but if you can live with the idea of
+# some data loss consider the default persistence mode that's snapshotting).
+
+appendfsync always
+# appendfsync everysec
+# appendfsync no
############################### ADVANCED CONFIG ###############################
# string in your dataset, but performs lookups against the shared objects
# pool so it uses more CPU and can be a bit slower. Usually it's a good
# idea.
+#
+# When object sharing is enabled (shareobjects yes) you can use
+# shareobjectspoolsize to control the size of the pool used in order to try
+# object sharing. A bigger pool size will lead to better sharing capabilities.
+# In general you want this value to be at least the double of the number of
+# very common strings you have in your dataset.
+#
+# WARNING: object sharing is experimental, don't enable this feature
+# in production before of Redis 1.0-stable. Still please try this feature in
+# your development environment so that we can test it better.
shareobjects no
+shareobjectspoolsize 1024
projects / redis.git / blobdiff