if (slave->slaveseldb != dictid) {
robj *selectcmd;
- switch(dictid) {
- case 0: selectcmd = shared.select0; break;
- case 1: selectcmd = shared.select1; break;
- case 2: selectcmd = shared.select2; break;
- case 3: selectcmd = shared.select3; break;
- case 4: selectcmd = shared.select4; break;
- case 5: selectcmd = shared.select5; break;
- case 6: selectcmd = shared.select6; break;
- case 7: selectcmd = shared.select7; break;
- case 8: selectcmd = shared.select8; break;
- case 9: selectcmd = shared.select9; break;
- default:
+ if (dictid >= 0 && dictid < REDIS_SHARED_SELECT_CMDS) {
+ selectcmd = shared.select[dictid];
+ incrRefCount(selectcmd);
+ } else {
selectcmd = createObject(REDIS_STRING,
sdscatprintf(sdsempty(),"select %d\r\n",dictid));
- selectcmd->refcount = 0;
- break;
}
addReply(slave,selectcmd);
+ decrRefCount(selectcmd);
slave->slaveseldb = dictid;
}
addReplyMultiBulkLen(slave,argc);
}
}
-void replicationFeedMonitors(list *monitors, int dictid, robj **argv, int argc) {
+void replicationFeedMonitors(redisClient *c, list *monitors, int dictid, robj **argv, int argc) {
listNode *ln;
listIter li;
- int j;
+ int j, port;
sds cmdrepr = sdsnew("+");
robj *cmdobj;
+ char ip[32];
struct timeval tv;
gettimeofday(&tv,NULL);
cmdrepr = sdscatprintf(cmdrepr,"%ld.%06ld ",(long)tv.tv_sec,(long)tv.tv_usec);
- if (dictid != 0) cmdrepr = sdscatprintf(cmdrepr,"(db %d) ", dictid);
+ if (c->flags & REDIS_LUA_CLIENT) {
+ cmdrepr = sdscatprintf(cmdrepr,"[%d lua] ", dictid);
+ } else {
+ anetPeerToString(c->fd,ip,&port);
+ cmdrepr = sdscatprintf(cmdrepr,"[%d %s:%d] ", dictid,ip,port);
+ }
for (j = 0; j < argc; j++) {
if (argv[j]->encoding == REDIS_ENCODING_INT) {
/* Refuse SYNC requests if we are a slave but the link with our master
* is not ok... */
- if (server.masterhost && server.replstate != REDIS_REPL_CONNECTED) {
+ if (server.masterhost && server.repl_state != REDIS_REPL_CONNECTED) {
addReplyError(c,"Can't SYNC while not connected with my master");
return;
}
redisLog(REDIS_NOTICE,"Slave ask for synchronization");
/* Here we need to check if there is a background saving operation
* in progress, or if it is required to start one */
- if (server.bgsavechildpid != -1) {
+ if (server.rdb_child_pid != -1) {
/* Ok a background save is in progress. Let's check if it is a good
* one for replication, i.e. if there is another slave that is
* registering differences since the server forked to save */
if (ln) {
/* Perfect, the server is already registering differences for
* another slave. Set the right state, and copy the buffer. */
- listRelease(c->reply);
- c->reply = listDup(slave->reply);
+ copyClientOutputBuffer(c,slave);
c->replstate = REDIS_REPL_WAIT_BGSAVE_END;
redisLog(REDIS_NOTICE,"Waiting for end of BGSAVE for SYNC");
} else {
} else {
/* Ok we don't have a BGSAVE in progress, let's start one */
redisLog(REDIS_NOTICE,"Starting BGSAVE for SYNC");
- if (rdbSaveBackground(server.dbfilename) != REDIS_OK) {
+ if (rdbSaveBackground(server.rdb_filename) != REDIS_OK) {
redisLog(REDIS_NOTICE,"Replication failed, can't BGSAVE");
addReplyError(c,"Unable to perform background save");
return;
return;
}
+/* REPLCONF <option> <value> <option> <value> ...
+ * This command is used by a slave in order to configure the replication
+ * process before starting it with the SYNC command.
+ *
+ * Currently the only use of this command is to communicate to the master
+ * what is the listening port of the Slave redis instance, so that the
+ * master can accurately list slaves and their listening ports in
+ * the INFO output.
+ *
+ * In the future the same command can be used in order to configure
+ * the replication to initiate an incremental replication instead of a
+ * full resync. */
+void replconfCommand(redisClient *c) {
+ int j;
+
+ if ((c->argc % 2) == 0) {
+ /* Number of arguments must be odd to make sure that every
+ * option has a corresponding value. */
+ addReply(c,shared.syntaxerr);
+ return;
+ }
+
+ /* Process every option-value pair. */
+ for (j = 1; j < c->argc; j+=2) {
+ if (!strcasecmp(c->argv[j]->ptr,"listening-port")) {
+ long port;
+
+ if ((getLongFromObjectOrReply(c,c->argv[j+1],
+ &port,NULL) != REDIS_OK))
+ return;
+ c->slave_listening_port = port;
+ } else {
+ addReplyErrorFormat(c,"Unrecognized REPLCONF option: %s",
+ (char*)c->argv[j]->ptr);
+ return;
+ }
+ }
+ addReply(c,shared.ok);
+}
+
void sendBulkToSlave(aeEventLoop *el, int fd, void *privdata, int mask) {
redisClient *slave = privdata;
REDIS_NOTUSED(el);
freeClient(slave);
return;
}
- addReplySds(slave,sdsempty());
redisLog(REDIS_NOTICE,"Synchronization with slave succeeded");
}
}
redisLog(REDIS_WARNING,"SYNC failed. BGSAVE child returned an error");
continue;
}
- if ((slave->repldbfd = open(server.dbfilename,O_RDONLY)) == -1 ||
+ if ((slave->repldbfd = open(server.rdb_filename,O_RDONLY)) == -1 ||
redis_fstat(slave->repldbfd,&buf) == -1) {
freeClient(slave);
redisLog(REDIS_WARNING,"SYNC failed. Can't open/stat DB after BGSAVE: %s", strerror(errno));
}
}
if (startbgsave) {
- if (rdbSaveBackground(server.dbfilename) != REDIS_OK) {
+ if (rdbSaveBackground(server.rdb_filename) != REDIS_OK) {
listIter li;
listRewind(server.slaves,&li);
/* Abort the async download of the bulk dataset while SYNC-ing with master */
void replicationAbortSyncTransfer(void) {
- redisAssert(server.replstate == REDIS_REPL_TRANSFER);
+ redisAssert(server.repl_state == REDIS_REPL_TRANSFER);
aeDeleteFileEvent(server.el,server.repl_transfer_s,AE_READABLE);
close(server.repl_transfer_s);
close(server.repl_transfer_fd);
unlink(server.repl_transfer_tmpfile);
zfree(server.repl_transfer_tmpfile);
- server.replstate = REDIS_REPL_CONNECT;
+ server.repl_state = REDIS_REPL_CONNECT;
}
/* Asynchronously read the SYNC payload we receive from a master */
/* If repl_transfer_left == -1 we still have to read the bulk length
* from the master reply. */
if (server.repl_transfer_left == -1) {
- if (syncReadLine(fd,buf,1024,server.repl_syncio_timeout) == -1) {
+ if (syncReadLine(fd,buf,1024,server.repl_syncio_timeout*1000) == -1) {
redisLog(REDIS_WARNING,
"I/O error reading bulk count from MASTER: %s",
strerror(errno));
/* At this stage just a newline works as a PING in order to take
* the connection live. So we refresh our last interaction
* timestamp. */
- server.repl_transfer_lastio = time(NULL);
+ server.repl_transfer_lastio = server.unixtime;
return;
} else if (buf[0] != '$') {
redisLog(REDIS_WARNING,"Bad protocol from MASTER, the first byte is not '$', are you sure the host and port are right?");
replicationAbortSyncTransfer();
return;
}
- server.repl_transfer_lastio = time(NULL);
+ server.repl_transfer_lastio = server.unixtime;
if (write(server.repl_transfer_fd,buf,nread) != nread) {
- redisLog(REDIS_WARNING,"Write error or short write writing to the DB dump file needed for MASTER <-> SLAVE synchrnonization: %s", strerror(errno));
+ redisLog(REDIS_WARNING,"Write error or short write writing to the DB dump file needed for MASTER <-> SLAVE synchronization: %s", strerror(errno));
goto error;
}
server.repl_transfer_left -= nread;
/* Check if the transfer is now complete */
if (server.repl_transfer_left == 0) {
- if (rename(server.repl_transfer_tmpfile,server.dbfilename) == -1) {
+ if (rename(server.repl_transfer_tmpfile,server.rdb_filename) == -1) {
redisLog(REDIS_WARNING,"Failed trying to rename the temp DB into dump.rdb in MASTER <-> SLAVE synchronization: %s", strerror(errno));
replicationAbortSyncTransfer();
return;
* rdbLoad() will call the event loop to process events from time to
* time for non blocking loading. */
aeDeleteFileEvent(server.el,server.repl_transfer_s,AE_READABLE);
- if (rdbLoad(server.dbfilename) != REDIS_OK) {
+ if (rdbLoad(server.rdb_filename) != REDIS_OK) {
redisLog(REDIS_WARNING,"Failed trying to load the MASTER synchronization DB from disk");
replicationAbortSyncTransfer();
return;
server.master = createClient(server.repl_transfer_s);
server.master->flags |= REDIS_MASTER;
server.master->authenticated = 1;
- server.replstate = REDIS_REPL_CONNECTED;
+ server.repl_state = REDIS_REPL_CONNECTED;
redisLog(REDIS_NOTICE, "MASTER <-> SLAVE sync: Finished with success");
/* Restart the AOF subsystem now that we finished the sync. This
* will trigger an AOF rewrite, and when done will start appending
return;
}
+/* Send a synchronous command to the master. Used to send AUTH and
+ * REPLCONF commands before starting the replication with SYNC.
+ *
+ * On success NULL is returned.
+ * On error an sds string describing the error is returned.
+ */
+char *sendSynchronousCommand(int fd, ...) {
+ va_list ap;
+ sds cmd = sdsempty();
+ char *arg, buf[256];
+
+ /* Create the command to send to the master, we use simple inline
+ * protocol for simplicity as currently we only send simple strings. */
+ va_start(ap,fd);
+ while(1) {
+ arg = va_arg(ap, char*);
+ if (arg == NULL) break;
+
+ if (sdslen(cmd) != 0) cmd = sdscatlen(cmd," ",1);
+ cmd = sdscat(cmd,arg);
+ }
+ cmd = sdscatlen(cmd,"\r\n",2);
+
+ /* Transfer command to the server. */
+ if (syncWrite(fd,cmd,sdslen(cmd),server.repl_syncio_timeout*1000) == -1) {
+ sdsfree(cmd);
+ return sdscatprintf(sdsempty(),"Writing to master: %s",
+ strerror(errno));
+ }
+ sdsfree(cmd);
+
+ /* Read the reply from the server. */
+ if (syncReadLine(fd,buf,sizeof(buf),server.repl_syncio_timeout*1000) == -1)
+ {
+ return sdscatprintf(sdsempty(),"Reading from master: %s",
+ strerror(errno));
+ }
+
+ /* Check for errors from the server. */
+ if (buf[0] != '+') {
+ return sdscatprintf(sdsempty(),"Error from master: %s", buf);
+ }
+
+ return NULL; /* No errors. */
+}
+
void syncWithMaster(aeEventLoop *el, int fd, void *privdata, int mask) {
- char buf[1024], tmpfile[256];
+ char tmpfile[256], *err;
int dfd, maxtries = 5;
REDIS_NOTUSED(el);
REDIS_NOTUSED(privdata);
/* If this event fired after the user turned the instance into a master
* with SLAVEOF NO ONE we must just return ASAP. */
- if (server.replstate == REDIS_REPL_NONE) {
+ if (server.repl_state == REDIS_REPL_NONE) {
close(fd);
return;
}
/* AUTH with the master if required. */
if(server.masterauth) {
- char authcmd[1024];
- size_t authlen;
-
- authlen = snprintf(authcmd,sizeof(authcmd),"AUTH %s\r\n",server.masterauth);
- if (syncWrite(fd,authcmd,authlen,server.repl_syncio_timeout) == -1) {
- redisLog(REDIS_WARNING,"Unable to AUTH to MASTER: %s",
- strerror(errno));
+ err = sendSynchronousCommand(fd,"AUTH",server.masterauth,NULL);
+ if (err) {
+ redisLog(REDIS_WARNING,"Unable to AUTH to MASTER: %s",err);
+ sdsfree(err);
goto error;
}
- /* Read the AUTH result. */
- if (syncReadLine(fd,buf,1024,server.repl_syncio_timeout) == -1) {
- redisLog(REDIS_WARNING,"I/O error reading auth result from MASTER: %s",
- strerror(errno));
- goto error;
- }
- if (buf[0] != '+') {
- redisLog(REDIS_WARNING,"Cannot AUTH to MASTER, is the masterauth password correct?");
- goto error;
+ }
+
+ /* Set the slave port, so that Master's INFO command can list the
+ * slave listening port correctly. */
+ {
+ sds port = sdsfromlonglong(server.port);
+ err = sendSynchronousCommand(fd,"REPLCONF","listening-port",port,
+ NULL);
+ sdsfree(port);
+ /* Ignore the error if any, not all the Redis versions support
+ * REPLCONF listening-port. */
+ if (err) {
+ redisLog(REDIS_NOTICE,"(non critical): Master does not understand REPLCONF listening-port: %s", err);
+ sdsfree(err);
}
}
/* Issue the SYNC command */
- if (syncWrite(fd,"SYNC \r\n",7,server.repl_syncio_timeout) == -1) {
+ if (syncWrite(fd,"SYNC\r\n",6,server.repl_syncio_timeout*1000) == -1) {
redisLog(REDIS_WARNING,"I/O error writing to MASTER: %s",
strerror(errno));
goto error;
/* Prepare a suitable temp file for bulk transfer */
while(maxtries--) {
snprintf(tmpfile,256,
- "temp-%d.%ld.rdb",(int)time(NULL),(long int)getpid());
+ "temp-%d.%ld.rdb",(int)server.unixtime,(long int)getpid());
dfd = open(tmpfile,O_CREAT|O_WRONLY|O_EXCL,0644);
if (dfd != -1) break;
sleep(1);
goto error;
}
- server.replstate = REDIS_REPL_TRANSFER;
+ server.repl_state = REDIS_REPL_TRANSFER;
server.repl_transfer_left = -1;
server.repl_transfer_fd = dfd;
- server.repl_transfer_lastio = time(NULL);
+ server.repl_transfer_lastio = server.unixtime;
server.repl_transfer_tmpfile = zstrdup(tmpfile);
return;
error:
- server.replstate = REDIS_REPL_CONNECT;
+ server.repl_state = REDIS_REPL_CONNECT;
close(fd);
return;
}
return REDIS_ERR;
}
- server.repl_transfer_lastio = time(NULL);
+ server.repl_transfer_lastio = server.unixtime;
server.repl_transfer_s = fd;
- server.replstate = REDIS_REPL_CONNECTING;
+ server.repl_state = REDIS_REPL_CONNECTING;
return REDIS_OK;
}
void undoConnectWithMaster(void) {
int fd = server.repl_transfer_s;
- redisAssert(server.replstate == REDIS_REPL_CONNECTING);
+ redisAssert(server.repl_state == REDIS_REPL_CONNECTING);
aeDeleteFileEvent(server.el,fd,AE_READABLE|AE_WRITABLE);
close(fd);
server.repl_transfer_s = -1;
- server.replstate = REDIS_REPL_CONNECT;
+ server.repl_state = REDIS_REPL_CONNECT;
}
void slaveofCommand(redisClient *c) {
sdsfree(server.masterhost);
server.masterhost = NULL;
if (server.master) freeClient(server.master);
- if (server.replstate == REDIS_REPL_TRANSFER)
+ if (server.repl_state == REDIS_REPL_TRANSFER)
replicationAbortSyncTransfer();
- else if (server.replstate == REDIS_REPL_CONNECTING)
+ else if (server.repl_state == REDIS_REPL_CONNECTING)
undoConnectWithMaster();
- server.replstate = REDIS_REPL_NONE;
+ server.repl_state = REDIS_REPL_NONE;
redisLog(REDIS_NOTICE,"MASTER MODE enabled (user request)");
}
} else {
+ long port;
+
+ if ((getLongFromObjectOrReply(c, c->argv[2], &port, NULL) != REDIS_OK))
+ return;
+
+ /* Check if we are already attached to the specified slave */
+ if (server.masterhost && !strcasecmp(server.masterhost,c->argv[1]->ptr)
+ && server.masterport == port) {
+ redisLog(REDIS_NOTICE,"SLAVE OF would result into synchronization with the master we are already connected with. No operation performed.");
+ addReplySds(c,sdsnew("+OK Already connected to specified master\r\n"));
+ return;
+ }
+ /* There was no previous master or the user specified a different one,
+ * we can continue. */
sdsfree(server.masterhost);
server.masterhost = sdsdup(c->argv[1]->ptr);
- server.masterport = atoi(c->argv[2]->ptr);
+ server.masterport = port;
if (server.master) freeClient(server.master);
- if (server.replstate == REDIS_REPL_TRANSFER)
+ disconnectSlaves(); /* Force our slaves to resync with us as well. */
+ if (server.repl_state == REDIS_REPL_TRANSFER)
replicationAbortSyncTransfer();
- server.replstate = REDIS_REPL_CONNECT;
+ server.repl_state = REDIS_REPL_CONNECT;
redisLog(REDIS_NOTICE,"SLAVE OF %s:%d enabled (user request)",
server.masterhost, server.masterport);
}
void replicationCron(void) {
/* Non blocking connection timeout? */
- if (server.masterhost && server.replstate == REDIS_REPL_CONNECTING &&
+ if (server.masterhost && server.repl_state == REDIS_REPL_CONNECTING &&
(time(NULL)-server.repl_transfer_lastio) > server.repl_timeout)
{
redisLog(REDIS_WARNING,"Timeout connecting to the MASTER...");
}
/* Bulk transfer I/O timeout? */
- if (server.masterhost && server.replstate == REDIS_REPL_TRANSFER &&
+ if (server.masterhost && server.repl_state == REDIS_REPL_TRANSFER &&
(time(NULL)-server.repl_transfer_lastio) > server.repl_timeout)
{
redisLog(REDIS_WARNING,"Timeout receiving bulk data from MASTER...");
}
/* Timed out master when we are an already connected slave? */
- if (server.masterhost && server.replstate == REDIS_REPL_CONNECTED &&
+ if (server.masterhost && server.repl_state == REDIS_REPL_CONNECTED &&
(time(NULL)-server.master->lastinteraction) > server.repl_timeout)
{
redisLog(REDIS_WARNING,"MASTER time out: no data nor PING received...");
}
/* Check if we should connect to a MASTER */
- if (server.replstate == REDIS_REPL_CONNECT) {
+ if (server.repl_state == REDIS_REPL_CONNECT) {
redisLog(REDIS_NOTICE,"Connecting to MASTER...");
if (connectWithMaster() == REDIS_OK) {
redisLog(REDIS_NOTICE,"MASTER <-> SLAVE sync started");
if (slave->replstate == REDIS_REPL_SEND_BULK) continue;
if (slave->replstate == REDIS_REPL_ONLINE) {
/* If the slave is online send a normal ping */
- addReplySds(slave,sdsnew("PING\r\n"));
+ addReplySds(slave,sdsnew("*1\r\n$4\r\nPING\r\n"));
} else {
/* Otherwise we are in the pre-synchronization stage.
* Just a newline will do the work of refreshing the
projects / redis.git / blobdiff