if (slave->slaveseldb != dictid) {
robj *selectcmd;
- switch(dictid) {
- case 0: selectcmd = shared.select0; break;
- case 1: selectcmd = shared.select1; break;
- case 2: selectcmd = shared.select2; break;
- case 3: selectcmd = shared.select3; break;
- case 4: selectcmd = shared.select4; break;
- case 5: selectcmd = shared.select5; break;
- case 6: selectcmd = shared.select6; break;
- case 7: selectcmd = shared.select7; break;
- case 8: selectcmd = shared.select8; break;
- case 9: selectcmd = shared.select9; break;
- default:
+ if (dictid >= 0 && dictid < REDIS_SHARED_SELECT_CMDS) {
+ selectcmd = shared.select[dictid];
+ incrRefCount(selectcmd);
+ } else {
selectcmd = createObject(REDIS_STRING,
sdscatprintf(sdsempty(),"select %d\r\n",dictid));
- selectcmd->refcount = 0;
- break;
}
addReply(slave,selectcmd);
+ decrRefCount(selectcmd);
slave->slaveseldb = dictid;
}
addReplyMultiBulkLen(slave,argc);
return;
}
+/* REPLCONF <option> <value> <option> <value> ...
+ * This command is used by a slave in order to configure the replication
+ * process before starting it with the SYNC command.
+ *
+ * Currently the only use of this command is to communicate to the master
+ * what is the listening port of the Slave redis instance, so that the
+ * master can accurately list slaves and their listening ports in
+ * the INFO output.
+ *
+ * In the future the same command can be used in order to configure
+ * the replication to initiate an incremental replication instead of a
+ * full resync. */
+void replconfCommand(redisClient *c) {
+ int j;
+
+ if ((c->argc % 2) == 0) {
+ /* Number of arguments must be odd to make sure that every
+ * option has a corresponding value. */
+ addReply(c,shared.syntaxerr);
+ return;
+ }
+
+ /* Process every option-value pair. */
+ for (j = 1; j < c->argc; j+=2) {
+ if (!strcasecmp(c->argv[j]->ptr,"listening-port")) {
+ long port;
+
+ if ((getLongFromObjectOrReply(c,c->argv[j+1],
+ &port,NULL) != REDIS_OK))
+ return;
+ c->slave_listening_port = port;
+ } else {
+ addReplyErrorFormat(c,"Unrecognized REPLCONF option: %s",
+ (char*)c->argv[j]->ptr);
+ return;
+ }
+ }
+ addReply(c,shared.ok);
+}
+
void sendBulkToSlave(aeEventLoop *el, int fd, void *privdata, int mask) {
redisClient *slave = privdata;
REDIS_NOTUSED(el);
freeClient(slave);
return;
}
- addReplySds(slave,sdsempty());
redisLog(REDIS_NOTICE,"Synchronization with slave succeeded");
}
}
}
/* Asynchronously read the SYNC payload we receive from a master */
+#define REPL_MAX_WRITTEN_BEFORE_FSYNC (1024*1024*8) /* 8 MB */
void readSyncBulkPayload(aeEventLoop *el, int fd, void *privdata, int mask) {
char buf[4096];
ssize_t nread, readlen;
+ off_t left;
REDIS_NOTUSED(el);
REDIS_NOTUSED(privdata);
REDIS_NOTUSED(mask);
- /* If repl_transfer_left == -1 we still have to read the bulk length
+ /* If repl_transfer_size == -1 we still have to read the bulk length
* from the master reply. */
- if (server.repl_transfer_left == -1) {
- if (syncReadLine(fd,buf,1024,server.repl_syncio_timeout) == -1) {
+ if (server.repl_transfer_size == -1) {
+ if (syncReadLine(fd,buf,1024,server.repl_syncio_timeout*1000) == -1) {
redisLog(REDIS_WARNING,
"I/O error reading bulk count from MASTER: %s",
strerror(errno));
/* At this stage just a newline works as a PING in order to take
* the connection live. So we refresh our last interaction
* timestamp. */
- server.repl_transfer_lastio = time(NULL);
+ server.repl_transfer_lastio = server.unixtime;
return;
} else if (buf[0] != '$') {
redisLog(REDIS_WARNING,"Bad protocol from MASTER, the first byte is not '$', are you sure the host and port are right?");
goto error;
}
- server.repl_transfer_left = strtol(buf+1,NULL,10);
+ server.repl_transfer_size = strtol(buf+1,NULL,10);
redisLog(REDIS_NOTICE,
"MASTER <-> SLAVE sync: receiving %ld bytes from master",
- server.repl_transfer_left);
+ server.repl_transfer_size);
return;
}
/* Read bulk data */
- readlen = (server.repl_transfer_left < (signed)sizeof(buf)) ?
- server.repl_transfer_left : (signed)sizeof(buf);
+ left = server.repl_transfer_size - server.repl_transfer_read;
+ readlen = (left < (signed)sizeof(buf)) ? left : (signed)sizeof(buf);
nread = read(fd,buf,readlen);
if (nread <= 0) {
redisLog(REDIS_WARNING,"I/O error trying to sync with MASTER: %s",
replicationAbortSyncTransfer();
return;
}
- server.repl_transfer_lastio = time(NULL);
+ server.repl_transfer_lastio = server.unixtime;
if (write(server.repl_transfer_fd,buf,nread) != nread) {
- redisLog(REDIS_WARNING,"Write error or short write writing to the DB dump file needed for MASTER <-> SLAVE synchrnonization: %s", strerror(errno));
+ redisLog(REDIS_WARNING,"Write error or short write writing to the DB dump file needed for MASTER <-> SLAVE synchronization: %s", strerror(errno));
goto error;
}
- server.repl_transfer_left -= nread;
+ server.repl_transfer_read += nread;
+
+ /* Sync data on disk from time to time, otherwise at the end of the transfer
+ * we may suffer a big delay as the memory buffers are copied into the
+ * actual disk. */
+ if (server.repl_transfer_read >=
+ server.repl_transfer_last_fsync_off + REPL_MAX_WRITTEN_BEFORE_FSYNC)
+ {
+ off_t sync_size = server.repl_transfer_read -
+ server.repl_transfer_last_fsync_off;
+ rdb_fsync_range(server.repl_transfer_fd,
+ server.repl_transfer_last_fsync_off, sync_size);
+ server.repl_transfer_last_fsync_off += sync_size;
+ }
+
/* Check if the transfer is now complete */
- if (server.repl_transfer_left == 0) {
+ if (server.repl_transfer_read == server.repl_transfer_size) {
if (rename(server.repl_transfer_tmpfile,server.rdb_filename) == -1) {
redisLog(REDIS_WARNING,"Failed trying to rename the temp DB into dump.rdb in MASTER <-> SLAVE synchronization: %s", strerror(errno));
replicationAbortSyncTransfer();
return;
}
+/* Send a synchronous command to the master. Used to send AUTH and
+ * REPLCONF commands before starting the replication with SYNC.
+ *
+ * On success NULL is returned.
+ * On error an sds string describing the error is returned.
+ */
+char *sendSynchronousCommand(int fd, ...) {
+ va_list ap;
+ sds cmd = sdsempty();
+ char *arg, buf[256];
+
+ /* Create the command to send to the master, we use simple inline
+ * protocol for simplicity as currently we only send simple strings. */
+ va_start(ap,fd);
+ while(1) {
+ arg = va_arg(ap, char*);
+ if (arg == NULL) break;
+
+ if (sdslen(cmd) != 0) cmd = sdscatlen(cmd," ",1);
+ cmd = sdscat(cmd,arg);
+ }
+ cmd = sdscatlen(cmd,"\r\n",2);
+
+ /* Transfer command to the server. */
+ if (syncWrite(fd,cmd,sdslen(cmd),server.repl_syncio_timeout*1000) == -1) {
+ sdsfree(cmd);
+ return sdscatprintf(sdsempty(),"Writing to master: %s",
+ strerror(errno));
+ }
+ sdsfree(cmd);
+
+ /* Read the reply from the server. */
+ if (syncReadLine(fd,buf,sizeof(buf),server.repl_syncio_timeout*1000) == -1)
+ {
+ return sdscatprintf(sdsempty(),"Reading from master: %s",
+ strerror(errno));
+ }
+
+ /* Check for errors from the server. */
+ if (buf[0] != '+') {
+ return sdscatprintf(sdsempty(),"Error from master: %s", buf);
+ }
+
+ return NULL; /* No errors. */
+}
+
void syncWithMaster(aeEventLoop *el, int fd, void *privdata, int mask) {
- char buf[1024], tmpfile[256];
+ char tmpfile[256], *err;
int dfd, maxtries = 5;
REDIS_NOTUSED(el);
REDIS_NOTUSED(privdata);
/* AUTH with the master if required. */
if(server.masterauth) {
- char authcmd[1024];
- size_t authlen;
-
- authlen = snprintf(authcmd,sizeof(authcmd),"AUTH %s\r\n",server.masterauth);
- if (syncWrite(fd,authcmd,authlen,server.repl_syncio_timeout) == -1) {
- redisLog(REDIS_WARNING,"Unable to AUTH to MASTER: %s",
- strerror(errno));
- goto error;
- }
- /* Read the AUTH result. */
- if (syncReadLine(fd,buf,1024,server.repl_syncio_timeout) == -1) {
- redisLog(REDIS_WARNING,"I/O error reading auth result from MASTER: %s",
- strerror(errno));
+ err = sendSynchronousCommand(fd,"AUTH",server.masterauth,NULL);
+ if (err) {
+ redisLog(REDIS_WARNING,"Unable to AUTH to MASTER: %s",err);
+ sdsfree(err);
goto error;
}
- if (buf[0] != '+') {
- redisLog(REDIS_WARNING,"Cannot AUTH to MASTER, is the masterauth password correct?");
- goto error;
+ }
+
+ /* Set the slave port, so that Master's INFO command can list the
+ * slave listening port correctly. */
+ {
+ sds port = sdsfromlonglong(server.port);
+ err = sendSynchronousCommand(fd,"REPLCONF","listening-port",port,
+ NULL);
+ sdsfree(port);
+ /* Ignore the error if any, not all the Redis versions support
+ * REPLCONF listening-port. */
+ if (err) {
+ redisLog(REDIS_NOTICE,"(non critical): Master does not understand REPLCONF listening-port: %s", err);
+ sdsfree(err);
}
}
/* Issue the SYNC command */
- if (syncWrite(fd,"SYNC \r\n",7,server.repl_syncio_timeout) == -1) {
+ if (syncWrite(fd,"SYNC\r\n",6,server.repl_syncio_timeout*1000) == -1) {
redisLog(REDIS_WARNING,"I/O error writing to MASTER: %s",
strerror(errno));
goto error;
/* Prepare a suitable temp file for bulk transfer */
while(maxtries--) {
snprintf(tmpfile,256,
- "temp-%d.%ld.rdb",(int)time(NULL),(long int)getpid());
+ "temp-%d.%ld.rdb",(int)server.unixtime,(long int)getpid());
dfd = open(tmpfile,O_CREAT|O_WRONLY|O_EXCL,0644);
if (dfd != -1) break;
sleep(1);
}
server.repl_state = REDIS_REPL_TRANSFER;
- server.repl_transfer_left = -1;
+ server.repl_transfer_size = -1;
+ server.repl_transfer_read = 0;
+ server.repl_transfer_last_fsync_off = 0;
server.repl_transfer_fd = dfd;
- server.repl_transfer_lastio = time(NULL);
+ server.repl_transfer_lastio = server.unixtime;
server.repl_transfer_tmpfile = zstrdup(tmpfile);
return;
return REDIS_ERR;
}
- server.repl_transfer_lastio = time(NULL);
+ server.repl_transfer_lastio = server.unixtime;
server.repl_transfer_s = fd;
server.repl_state = REDIS_REPL_CONNECTING;
return REDIS_OK;
server.masterhost = sdsdup(c->argv[1]->ptr);
server.masterport = port;
if (server.master) freeClient(server.master);
+ disconnectSlaves(); /* Force our slaves to resync with us as well. */
if (server.repl_state == REDIS_REPL_TRANSFER)
replicationAbortSyncTransfer();
server.repl_state = REDIS_REPL_CONNECT;
projects / redis.git / blobdiff