# Set the max number of connected clients at the same time. By default there
# is no limit, and it's up to the number of file descriptors the Redis process
-# is able to open. The special value '0' means no limts.
+# is able to open. The special value '0' means no limits.
# Once the limit is reached Redis will close all the new connections sending
# an error 'max number of clients reached'.
#
# happens this is the preferred way to run Redis. If instead you care a lot
# about your data and don't want to that a single record can get lost you should
# enable the append only mode: when this mode is enabled Redis will append
-# every write operation received in the file appendonly.log. This file will
+# every write operation received in the file appendonly.aof. This file will
# be read on startup in order to rebuild the full dataset in memory.
#
# Note that you can have both the async dumps and the append only file if you
# Still if append only mode is enabled Redis will load the data from the
# log file at startup ignoring the dump.rdb file.
#
-# The name of the append only file is "appendonly.log"
+# The name of the append only file is "appendonly.aof"
#
# IMPORTANT: Check the BGREWRITEAOF to check how to rewrite the append
# log file in background when it gets too big.
# always: fsync after every write to the append only log . Slow, Safest.
# everysec: fsync only if one second passed since the last fsync. Compromise.
#
-# The default is "always" that's the safer of the options. It's up to you to
-# understand if you can relax this to "everysec" that will fsync every second
-# or to "no" that will let the operating system flush the output buffer when
-# it want, for better performances (but if you can live with the idea of
-# some data loss consider the default persistence mode that's snapshotting).
+# The default is "everysec" that's usually the right compromise between
+# speed and data safety. It's up to you to understand if you can relax this to
+# "no" that will will let the operating system flush the output buffer when
+# it wants, for better performances (but if you can live with the idea of
+# some data loss consider the default persistence mode that's snapshotting),
+# or on the contrary, use "always" that's very slow but a bit safer than
+# everysec.
+#
+# If unsure, use "everysec".
-appendfsync always
-# appendfsync everysec
+# appendfsync always
+appendfsync everysec
# appendfsync no
################################ VIRTUAL MEMORY ###############################
vm-enabled no
# vm-enabled yes
+# This is the path of the Redis swap file. As you can guess, swap files
+# can't be shared by different Redis instances, so make sure to use a swap
+# file for every redis process you are running.
+#
+# The swap file name may contain "%p" that is substituted with the PID of
+# the Redis process, so the default name /tmp/redis-%p.vm will work even
+# with multiple instances as Redis will use, for example, redis-811.vm
+# for one instance and redis-593.vm for another one.
+#
+# Useless to say, the best kind of disk for a Redis swap file (that's accessed
+# at random) is a Solid State Disk (SSD).
+#
+# *** WARNING *** if you are using a shared hosting the default of putting
+# the swap file under /tmp is not secure. Create a dir with access granted
+# only to Redis user and configure Redis to create the swap file there.
+vm-swap-file /tmp/redis-%p.vm
+
# vm-max-memory configures the VM to use at max the specified amount of
# RAM. Everything that deos not fit will be swapped on disk *if* possible, that
# is, if there is still enough contiguous space in the swap file.
#
-# With vm-max-memory 10000000 the system will swap almost everything it
-# can. Not a good default, just specify the max amount of RAM you can
-# in bytes, but it's better to leave some margin. For instance specify
-# an amount of RAM that's more or less 80% of your free RAM.
-vm-max-memory 10000000
+# With vm-max-memory 0 the system will swap everything it can. Not a good
+# default, just specify the max amount of RAM you can in bytes, but it's
+# better to leave some margin. For instance specify an amount of RAM
+# that's more or less between 60 and 80% of your free RAM.
+vm-max-memory 0
# Redis swap files is split into pages. An object can be saved using multiple
# contiguous pages, but pages can't be shared between different objects.
#
# If you use a lot of small objects, use a page size of 64 or 32 bytes.
# If you use a lot of big objects, use a bigger page size.
-# If unsure, use the defualt :)
-vm-page-size 256
+# If unsure, use the default :)
+vm-page-size 32
# Number of total memory pages in the swap file.
# Given that the page table (a bitmap of free/used pages) is taken in memory,
#
# The total swap size is vm-page-size * vm-pages
#
-# With the default of 256-bytes memory pages and 104857600 pages Redis will
-# use a 25 GB swap file, that will use rougly 13 MB of RAM for the page table.
+# With the default of 32-bytes memory pages and 134217728 pages Redis will
+# use a 4 GB swap file, that will use 16 MB of RAM for the page table.
#
# It's better to use the smallest acceptable value for your application,
# but the default is large in order to work in most conditions.
-vm-pages 104857600
+vm-pages 134217728
+
+# Max number of VM I/O threads running at the same time.
+# This threads are used to read/write data from/to swap file, since they
+# also encode and decode objects from disk to memory or the reverse, a bigger
+# number of threads can help with big objects even if they can't help with
+# I/O itself as the physical device may not be able to couple with many
+# reads/writes operations at the same time.
+#
+# The special value of 0 turn off threaded I/O and enables the blocking
+# Virtual Memory implementation.
+vm-max-threads 4
############################### ADVANCED CONFIG ###############################
# in terms of number of queries per second. Use 'yes' if unsure.
glueoutputbuf yes
-# Use object sharing. Can save a lot of memory if you have many common
-# string in your dataset, but performs lookups against the shared objects
-# pool so it uses more CPU and can be a bit slower. Usually it's a good
-# idea.
-#
-# When object sharing is enabled (shareobjects yes) you can use
-# shareobjectspoolsize to control the size of the pool used in order to try
-# object sharing. A bigger pool size will lead to better sharing capabilities.
-# In general you want this value to be at least the double of the number of
-# very common strings you have in your dataset.
-#
-# WARNING: object sharing is experimental, don't enable this feature
-# in production before of Redis 1.0-stable. Still please try this feature in
-# your development environment so that we can test it better.
-shareobjects no
-shareobjectspoolsize 1024
+# Hashes are encoded in a special way (much more memory efficient) when they
+# have at max a given numer of elements, and the biggest element does not
+# exceed a given threshold. You can configure this limits with the following
+# configuration directives.
+hash-max-zipmap-entries 64
+hash-max-zipmap-value 512
+
+# Active rehashing uses 1 millisecond every 100 milliseconds of CPU time in
+# order to help rehashing the main Redis hash table (the one mapping top-level
+# keys to values). The hash table implementation redis uses (see dict.c)
+# performs a lazy rehashing: the more operation you run into an hash table
+# that is rhashing, the more rehashing "steps" are performed, so if the
+# server is idle the rehashing is never complete and some more memory is used
+# by the hash table.
+#
+# The default is to use this millisecond 10 times every second in order to
+# active rehashing the main dictionaries, freeing memory when possible.
+#
+# If unsure:
+# use "activerehashing no" if you have hard latency requirements and it is
+# not a good thing in your environment that Redis can reply form time to time
+# to queries with 2 milliseconds delay.
+#
+# use "activerehashing yes" if you don't have such hard requirements but
+# want to free memory asap when possible.
+activerehashing yes
+
+################################## INCLUDES ###################################
+
+# Include one or more other config files here. This is useful if you
+# have a standard template that goes to all redis server but also need
+# to customize a few per-server settings. Include files can include
+# other files, so use this wisely.
+#
+# include /path/to/local.conf
+# include /path/to/other.conf
projects / redis.git / blobdiff