save 300 10
save 60 10000
+# By default Redis will stop accepting writes if RDB snapshots are enabled
+# (at least one save point) and the latest background save failed.
+# This will make the user aware (in an hard way) that data is not persisting
+# on disk properly, otherwise chances are that no one will notice and some
+# distater will happen.
+#
+# If the background saving process will start working again Redis will
+# automatically allow writes again.
+#
+# However if you have setup your proper monitoring of the Redis server
+# and persistence, you may want to disable this feature so that Redis will
+# continue to work as usually even if there are problems with disk,
+# permissions, and so forth.
+stop-writes-on-bgsave-error yes
+
# Compress string objects using LZF when dump .rdb databases?
# For default that's set to 'yes' as it's almost always a win.
# If you want to save some CPU in the saving child set it to 'no' but
# the dataset will likely be bigger if you have compressible values or keys.
rdbcompression yes
+# Since verison 5 of RDB a CRC64 checksum is placed at the end of the file.
+# This makes the format more resistant to corruption but there is a performance
+# hit to pay (around 10%) when saving and loading RDB files, so you can disable it
+# for maximum performances.
+#
+# RDB files created with checksum disabled have a checksum of zero that will
+# tell the loading code to skip the check.
+rdbchecksum yes
+
# The filename where to dump the DB
dbfilename dump.rdb
#
slave-serve-stale-data yes
+# You can configure a slave instance to accept writes or not. Writing against
+# a slave instance may be useful to store some ephemeral data (because data
+# written on a slave will be easily deleted after resync with the master) but
+# may also cause problems if clients are writing to it because of a
+# misconfiguration.
+#
+# Since Redis 2.6 by default slaves are read-only.
+#
+# Note: read only slaves are not designed to be exposed to untrusted clients
+# on the internet. It's just a protection layer against misuse of the instance.
+# Still a read only slave exports by default all the administrative commands
+# such as CONFIG, DEBUG, and so forth. To a limited extend you can improve
+# security of read only slaves using 'rename-command' to shadow all the
+# administrative / dangerous commands.
+slave-read-only yes
+
# Slaves send PINGs to server in a predefined interval. It's possible to change
# this interval with the repl_ping_slave_period option. The default value is 10
# seconds.
#
# repl-timeout 60
+# The slave priority is an integer number published by Redis in the INFO output.
+# It is used by Redis Sentinel in order to select a slave to promote into a
+# master if the master is no longer working correctly.
+#
+# A slave with a low priority number is considered better for promotion, so
+# for instance if there are three slaves with priority 10, 100, 25 Sentinel will
+# pick the one wtih priority 10, that is the lowest.
+#
+# However a special priority of 0 marks the slave as not able to perform the
+# role of master, so a slave with priority of 0 will never be selected by
+# Redis Sentinel for promotion.
+#
+# By default the priority is 100.
+slave-priority 100
+
################################## SECURITY ###################################
# Require clients to issue AUTH <PASSWORD> before processing any other
# maxclients 10000
# Don't use more memory than the specified amount of bytes.
-# When the memory limit is reached Redis will try to remove keys with an
-# EXPIRE set. It will try to start freeing keys that are going to expire
-# in little time and preserve keys with a longer time to live.
-# Redis will also try to remove objects from free lists if possible.
-#
-# If all this fails, Redis will start to reply with errors to commands
-# that will use more memory, like SET, LPUSH, and so on, and will continue
-# to reply to most read-only commands like GET.
-#
-# WARNING: maxmemory can be a good idea mainly if you want to use Redis as a
-# 'state' server or cache, not as a real DB. When Redis is used as a real
-# database the memory usage will grow over the weeks, it will be obvious if
-# it is going to use too much memory in the long run, and you'll have the time
-# to upgrade. With maxmemory after the limit is reached you'll start to get
-# errors for write operations, and this may even lead to DB inconsistency.
+# When the memory limit is reached Redis will try to remove keys
+# accordingly to the eviction policy selected (see maxmemmory-policy).
+#
+# If Redis can't remove keys according to the policy, or if the policy is
+# set to 'noeviction', Redis will start to reply with errors to commands
+# that would use more memory, like SET, LPUSH, and so on, and will continue
+# to reply to read-only commands like GET.
+#
+# This option is usually useful when using Redis as an LRU cache, or to set
+# an hard memory limit for an instance (using the 'noeviction' policy).
+#
+# WARNING: If you have slaves attached to an instance with maxmemory on,
+# the size of the output buffers needed to feed the slaves are subtracted
+# from the used memory count, so that network problems / resyncs will
+# not trigger a loop where keys are evicted, and in turn the output
+# buffer of slaves is full with DELs of keys evicted triggering the deletion
+# of more keys, and so forth until the database is completely emptied.
+#
+# In short... if you have slaves attached it is suggested that you set a lower
+# limit for maxmemory so that there is some free RAM on the system for slave
+# output buffers (but this is not needed if the policy is 'noeviction').
#
# maxmemory <bytes>
# volatile-lru -> remove the key with an expire set using an LRU algorithm
# allkeys-lru -> remove any key accordingly to the LRU algorithm
# volatile-random -> remove a random key with an expire set
-# allkeys->random -> remove a random key, any key
+# allkeys-random -> remove a random key, any key
# volatile-ttl -> remove the key with the nearest expire time (minor TTL)
# noeviction -> don't expire at all, just return an error on write operations
#
############################## APPEND ONLY MODE ###############################
-# By default Redis asynchronously dumps the dataset on disk. If you can live
-# with the idea that the latest records will be lost if something like a crash
-# happens this is the preferred way to run Redis. If instead you care a lot
-# about your data and don't want to that a single record can get lost you should
-# enable the append only mode: when this mode is enabled Redis will append
-# every write operation received in the file appendonly.aof. This file will
-# be read on startup in order to rebuild the full dataset in memory.
+# By default Redis asynchronously dumps the dataset on disk. This mode is
+# good enough in many applications, but an issue with the Redis process or
+# a power outage may result into a few minutes of writes lost (depending on
+# the configured save points).
+#
+# The Append Only File is an alternative persistence mode that provides
+# much better durability. For instance using the default data fsync policy
+# (see later in the config file) Redis can lose just one second of writes in a
+# dramatic event like a server power outage, or a single write if something
+# wrong with the Redis process itself happens, but the operating system is
+# still running correctly.
#
-# Note that you can have both the async dumps and the append only file if you
-# like (you have to comment the "save" statements above to disable the dumps).
-# Still if append only mode is enabled Redis will load the data from the
-# log file at startup ignoring the dump.rdb file.
+# AOF and RDB persistence can be enabled at the same time without problems.
+# If the AOF is enabled on startup Redis will load the AOF, that is the file
+# with the better durability guarantees.
#
-# IMPORTANT: Check the BGREWRITEAOF to check how to rewrite the append
-# log file in background when it gets too big.
+# Please check http://redis.io/topics/persistence for more information.
appendonly no
#
# no: don't fsync, just let the OS flush the data when it wants. Faster.
# always: fsync after every write to the append only log . Slow, Safest.
-# everysec: fsync only if one second passed since the last fsync. Compromise.
+# everysec: fsync only one time every second. Compromise.
#
# The default is "everysec" that's usually the right compromise between
# speed and data safety. It's up to you to understand if you can relax this to
# or on the contrary, use "always" that's very slow but a bit safer than
# everysec.
#
+# More details please check the following article:
+# http://antirez.com/post/redis-persistence-demystified.html
+#
# If unsure, use "everysec".
# appendfsync always
# Set it to 0 or a negative value for unlimited execution without warnings.
lua-time-limit 5000
-################################ REDIS CLUSTER ###############################
-#
-# Normal Redis instances can't be part of a Redis Cluster, only nodes that are
-# started as cluster nodes can. In order to start a Redis instance as a
-# cluster node enable the cluster support uncommenting the following:
-#
-# cluster-enabled yes
-
-# Every cluster node has a cluster configuration file. This file is not
-# intended to be edited by hand. It is created and updated by Redis nodes.
-# Every Redis Cluster node requires a different cluster configuration file.
-# Make sure that instances running in the same system does not have
-# overlapping cluster configuration file names.
-#
-# cluster-config-file nodes-6379.conf
-
-# In order to setup your cluster make sure to read the documentation
-# available at http://redis.io web site.
-
################################## SLOW LOG ###################################
# The Redis Slow Log is a system to log queries that exceeded a specified
# There is no limit to this length. Just be aware that it will consume memory.
# You can reclaim memory used by the slow log with SLOWLOG RESET.
-slowlog-max-len 1024
+slowlog-max-len 128
############################### ADVANCED CONFIG ###############################
-# Hashes are encoded in a special way (much more memory efficient) when they
-# have at max a given number of elements, and the biggest element does not
-# exceed a given threshold. You can configure this limits with the following
-# configuration directives.
-hash-max-zipmap-entries 512
-hash-max-zipmap-value 64
+# Hashes are encoded using a memory efficient data structure when they have a
+# small number of entries, and the biggest entry does not exceed a given
+# threshold. These thresholds can be configured using the following directives.
+hash-max-ziplist-entries 512
+hash-max-ziplist-value 64
# Similarly to hashes, small lists are also encoded in a special way in order
# to save a lot of space. The special representation is only used when
#
# The syntax of every client-output-buffer-limit directive is the following:
#
-# client-output-buffer-limit <hard limit> <soft limit> <soft limit seconds>
+# client-output-buffer-limit <class> <hard limit> <soft limit> <soft seconds>
#
# A client is immediately disconnected once the hard limit is reached, or if
# the soft limit is reached and remains reached for the specified number of
projects / redis.git / blobdiff