+++ /dev/null
-/* Redis CLI (command line interface)
- *
- * Copyright (c) 2009-2010, Salvatore Sanfilippo <antirez at gmail dot com>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * * Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of Redis nor the names of its contributors may be used
- * to endorse or promote products derived from this software without
- * specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include "fmacros.h"
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <ctype.h>
-
-#include "anet.h"
-#include "sds.h"
-#include "adlist.h"
-#include "zmalloc.h"
-#include "linenoise.h"
-
-#define REDIS_CMD_INLINE 1
-#define REDIS_CMD_BULK 2
-#define REDIS_CMD_MULTIBULK 4
-
-#define REDIS_NOTUSED(V) ((void) V)
-
-static struct config {
- char *hostip;
- int hostport;
- long repeat;
- int dbnum;
- int argn_from_stdin;
- int interactive;
- int shutdown;
- int monitor_mode;
- int pubsub_mode;
- int raw_output;
- char *auth;
-} config;
-
-static int cliReadReply(int fd);
-static void usage();
-
-static int cliConnect(void) {
- char err[ANET_ERR_LEN];
- static int fd = ANET_ERR;
-
- if (fd == ANET_ERR) {
- fd = anetTcpConnect(err,config.hostip,config.hostport);
- if (fd == ANET_ERR) {
- fprintf(stderr, "Could not connect to Redis at %s:%d: %s", config.hostip, config.hostport, err);
- return -1;
- }
- anetTcpNoDelay(NULL,fd);
- }
- return fd;
-}
-
-static sds cliReadLine(int fd) {
- sds line = sdsempty();
-
- while(1) {
- char c;
- ssize_t ret;
-
- ret = read(fd,&c,1);
- if (ret == -1) {
- sdsfree(line);
- return NULL;
- } else if ((ret == 0) || (c == '\n')) {
- break;
- } else {
- line = sdscatlen(line,&c,1);
- }
- }
- return sdstrim(line,"\r\n");
-}
-
-static int cliReadSingleLineReply(int fd, int quiet) {
- sds reply = cliReadLine(fd);
-
- if (reply == NULL) return 1;
- if (!quiet)
- printf("%s\n", reply);
- sdsfree(reply);
- return 0;
-}
-
-static void printStringRepr(char *s, int len) {
- printf("\"");
- while(len--) {
- switch(*s) {
- case '\\':
- case '"':
- printf("\\%c",*s);
- break;
- case '\n': printf("\\n"); break;
- case '\r': printf("\\r"); break;
- case '\t': printf("\\t"); break;
- case '\a': printf("\\a"); break;
- case '\b': printf("\\b"); break;
- default:
- if (isprint(*s))
- printf("%c",*s);
- else
- printf("\\x%02x",(unsigned char)*s);
- break;
- }
- s++;
- }
- printf("\"\n");
-}
-
-static int cliReadBulkReply(int fd) {
- sds replylen = cliReadLine(fd);
- char *reply, crlf[2];
- int bulklen;
-
- if (replylen == NULL) return 1;
- bulklen = atoi(replylen);
- if (bulklen == -1) {
- sdsfree(replylen);
- printf("(nil)\n");
- return 0;
- }
- reply = zmalloc(bulklen);
- anetRead(fd,reply,bulklen);
- anetRead(fd,crlf,2);
- if (config.raw_output || !isatty(fileno(stdout))) {
- if (bulklen && fwrite(reply,bulklen,1,stdout) == 0) {
- zfree(reply);
- return 1;
- }
- } else {
- /* If you are producing output for the standard output we want
- * a more interesting output with quoted characters and so forth */
- printStringRepr(reply,bulklen);
- }
- zfree(reply);
- return 0;
-}
-
-static int cliReadMultiBulkReply(int fd) {
- sds replylen = cliReadLine(fd);
- int elements, c = 1;
-
- if (replylen == NULL) return 1;
- elements = atoi(replylen);
- if (elements == -1) {
- sdsfree(replylen);
- printf("(nil)\n");
- return 0;
- }
- if (elements == 0) {
- printf("(empty list or set)\n");
- }
- while(elements--) {
- printf("%d. ", c);
- if (cliReadReply(fd)) return 1;
- c++;
- }
- return 0;
-}
-
-static int cliReadReply(int fd) {
- char type;
-
- if (anetRead(fd,&type,1) <= 0) {
- if (config.shutdown) return 0;
- exit(1);
- }
- switch(type) {
- case '-':
- printf("(error) ");
- cliReadSingleLineReply(fd,0);
- return 1;
- case '+':
- return cliReadSingleLineReply(fd,0);
- case ':':
- printf("(integer) ");
- return cliReadSingleLineReply(fd,0);
- case '$':
- return cliReadBulkReply(fd);
- case '*':
- return cliReadMultiBulkReply(fd);
- default:
- printf("protocol error, got '%c' as reply type byte\n", type);
- return 1;
- }
-}
-
-static int selectDb(int fd) {
- int retval;
- sds cmd;
- char type;
-
- if (config.dbnum == 0)
- return 0;
-
- cmd = sdsempty();
- cmd = sdscatprintf(cmd,"SELECT %d\r\n",config.dbnum);
- anetWrite(fd,cmd,sdslen(cmd));
- anetRead(fd,&type,1);
- if (type <= 0 || type != '+') return 1;
- retval = cliReadSingleLineReply(fd,1);
- if (retval) {
- return retval;
- }
- return 0;
-}
-
-static int cliSendCommand(int argc, char **argv, int repeat) {
- char *command = argv[0];
- int fd, j, retval = 0;
- sds cmd;
-
- config.raw_output = !strcasecmp(command,"info");
- if (!strcasecmp(command,"shutdown")) config.shutdown = 1;
- if (!strcasecmp(command,"monitor")) config.monitor_mode = 1;
- if (!strcasecmp(command,"subscribe") ||
- !strcasecmp(command,"psubscribe")) config.pubsub_mode = 1;
- if ((fd = cliConnect()) == -1) return 1;
-
- /* Select db number */
- retval = selectDb(fd);
- if (retval) {
- fprintf(stderr,"Error setting DB num\n");
- return 1;
- }
-
- /* Build the command to send */
- cmd = sdscatprintf(sdsempty(),"*%d\r\n",argc);
- for (j = 0; j < argc; j++) {
- cmd = sdscatprintf(cmd,"$%lu\r\n",
- (unsigned long)sdslen(argv[j]));
- cmd = sdscatlen(cmd,argv[j],sdslen(argv[j]));
- cmd = sdscatlen(cmd,"\r\n",2);
- }
-
- while(repeat--) {
- anetWrite(fd,cmd,sdslen(cmd));
- while (config.monitor_mode) {
- cliReadSingleLineReply(fd,0);
- }
-
- if (config.pubsub_mode) {
- printf("Reading messages... (press Ctrl-c to quit)\n");
- while (1) {
- cliReadReply(fd);
- printf("\n");
- }
- }
-
- retval = cliReadReply(fd);
- if (retval) {
- return retval;
- }
- }
- return 0;
-}
-
-static int parseOptions(int argc, char **argv) {
- int i;
-
- for (i = 1; i < argc; i++) {
- int lastarg = i==argc-1;
-
- if (!strcmp(argv[i],"-h") && !lastarg) {
- char *ip = zmalloc(32);
- if (anetResolve(NULL,argv[i+1],ip) == ANET_ERR) {
- printf("Can't resolve %s\n", argv[i]);
- exit(1);
- }
- config.hostip = ip;
- i++;
- } else if (!strcmp(argv[i],"-h") && lastarg) {
- usage();
- } else if (!strcmp(argv[i],"-p") && !lastarg) {
- config.hostport = atoi(argv[i+1]);
- i++;
- } else if (!strcmp(argv[i],"-r") && !lastarg) {
- config.repeat = strtoll(argv[i+1],NULL,10);
- i++;
- } else if (!strcmp(argv[i],"-n") && !lastarg) {
- config.dbnum = atoi(argv[i+1]);
- i++;
- } else if (!strcmp(argv[i],"-a") && !lastarg) {
- config.auth = argv[i+1];
- i++;
- } else if (!strcmp(argv[i],"-i")) {
- config.interactive = 1;
- } else if (!strcmp(argv[i],"-c")) {
- config.argn_from_stdin = 1;
- } else {
- break;
- }
- }
- return i;
-}
-
-static sds readArgFromStdin(void) {
- char buf[1024];
- sds arg = sdsempty();
-
- while(1) {
- int nread = read(fileno(stdin),buf,1024);
-
- if (nread == 0) break;
- else if (nread == -1) {
- perror("Reading from standard input");
- exit(1);
- }
- arg = sdscatlen(arg,buf,nread);
- }
- return arg;
-}
-
-static void usage() {
- fprintf(stderr, "usage: redis-cli [-h host] [-p port] [-a authpw] [-r repeat_times] [-n db_num] [-i] cmd arg1 arg2 arg3 ... argN\n");
- fprintf(stderr, "usage: echo \"argN\" | redis-cli -c [-h host] [-p port] [-a authpw] [-r repeat_times] [-n db_num] cmd arg1 arg2 ... arg(N-1)\n");
- fprintf(stderr, "\nIf a pipe from standard input is detected this data is used as last argument.\n\n");
- fprintf(stderr, "example: cat /etc/passwd | redis-cli set my_passwd\n");
- fprintf(stderr, "example: redis-cli get my_passwd\n");
- fprintf(stderr, "example: redis-cli -r 100 lpush mylist x\n");
- fprintf(stderr, "\nRun in interactive mode: redis-cli -i or just don't pass any command\n");
- exit(1);
-}
-
-/* Turn the plain C strings into Sds strings */
-static char **convertToSds(int count, char** args) {
- int j;
- char **sds = zmalloc(sizeof(char*)*count);
-
- for(j = 0; j < count; j++)
- sds[j] = sdsnew(args[j]);
-
- return sds;
-}
-
-static char **splitArguments(char *line, int *argc) {
- char *p = line;
- char *current = NULL;
- char **vector = NULL;
-
- *argc = 0;
- while(1) {
- /* skip blanks */
- while(*p && isspace(*p)) p++;
- if (*p) {
- /* get a token */
- int inq=0; /* set to 1 if we are in "quotes" */
- int done = 0;
-
- if (current == NULL) current = sdsempty();
- while(!done) {
- if (inq) {
- if (*p == '\\' && *(p+1)) {
- char c;
-
- p++;
- switch(*p) {
- case 'n': c = '\n'; break;
- case 'r': c = '\r'; break;
- case 't': c = '\t'; break;
- case 'b': c = '\b'; break;
- case 'a': c = '\a'; break;
- default: c = *p; break;
- }
- current = sdscatlen(current,&c,1);
- } else if (*p == '"') {
- done = 1;
- } else {
- current = sdscatlen(current,p,1);
- }
- } else {
- switch(*p) {
- case ' ':
- case '\n':
- case '\r':
- case '\t':
- case '\0':
- done=1;
- break;
- case '"':
- inq=1;
- break;
- default:
- current = sdscatlen(current,p,1);
- break;
- }
- }
- if (*p) p++;
- }
- /* add the token to the vector */
- vector = zrealloc(vector,((*argc)+1)*sizeof(char*));
- vector[*argc] = current;
- (*argc)++;
- current = NULL;
- } else {
- return vector;
- }
- }
-}
-
-#define LINE_BUFLEN 4096
-static void repl() {
- int argc, j;
- char *line, **argv;
-
- while((line = linenoise("redis> ")) != NULL) {
- if (line[0] != '\0') {
- argv = splitArguments(line,&argc);
- linenoiseHistoryAdd(line);
- if (argc > 0) {
- if (strcasecmp(argv[0],"quit") == 0 ||
- strcasecmp(argv[0],"exit") == 0)
- exit(0);
- else
- cliSendCommand(argc, argv, 1);
- }
- /* Free the argument vector */
- for (j = 0; j < argc; j++)
- sdsfree(argv[j]);
- zfree(argv);
- }
- /* linenoise() returns malloc-ed lines like readline() */
- free(line);
- }
- exit(0);
-}
-
-int main(int argc, char **argv) {
- int firstarg;
- char **argvcopy;
-
- config.hostip = "127.0.0.1";
- config.hostport = 6379;
- config.repeat = 1;
- config.dbnum = 0;
- config.argn_from_stdin = 0;
- config.shutdown = 0;
- config.interactive = 0;
- config.monitor_mode = 0;
- config.pubsub_mode = 0;
- config.raw_output = 0;
- config.auth = NULL;
-
- firstarg = parseOptions(argc,argv);
- argc -= firstarg;
- argv += firstarg;
-
- if (config.auth != NULL) {
- char *authargv[2];
-
- authargv[0] = "AUTH";
- authargv[1] = config.auth;
- cliSendCommand(2, convertToSds(2, authargv), 1);
- }
-
- if (argc == 0 || config.interactive == 1) repl();
-
- argvcopy = convertToSds(argc+1, argv);
- if (config.argn_from_stdin) {
- sds lastarg = readArgFromStdin();
- argvcopy[argc] = lastarg;
- argc++;
- }
- return cliSendCommand(argc, argvcopy, config.repeat);
-}
projects / redis.git / blobdiff