more advanced leaks detection in test redis

[redis.git] / redis.conf

diff --git a/redis.conf b/redis.conf
index c1a1f7f12de8512591b69b0fb1f1a4dd3aa849cb..c9ff26cf97b73c7f97d271ef6e147e785ac3f7b1 100644 (file)
--- a/redis.conf
+++ b/redis.conf
@@ -22,9 +22,10 @@ timeout 300
 # Set server verbosity to 'debug'
 # it can be one of:
 # debug (a lot of information, useful for development/testing)
 # Set server verbosity to 'debug'
 # it can be one of:
 # debug (a lot of information, useful for development/testing)

+# verbose (many rarely useful info, but not a mess like the debug level)

 # notice (moderately verbose, what you want in production probably)
 # warning (only very important / critical messages are logged)
 # notice (moderately verbose, what you want in production probably)
 # warning (only very important / critical messages are logged)

-loglevel debug
+loglevel verbose

 
 # Specify the log file name. Also 'stdout' can be used to force
 # the demon to log on the standard output. Note that if you use standard
 
 # Specify the log file name. Also 'stdout' can be used to force
 # the demon to log on the standard output. Note that if you use standard


@@ -49,6 +50,9 @@ databases 16
 #   after 900 sec (15 min) if at least 1 key changed
 #   after 300 sec (5 min) if at least 10 keys changed
 #   after 60 sec if at least 10000 keys changed
 #   after 900 sec (15 min) if at least 1 key changed
 #   after 300 sec (5 min) if at least 10 keys changed
 #   after 60 sec if at least 10000 keys changed

+#
+#   Note: you can disable saving at all commenting all the "save" lines.
+

 save 900 1
 save 300 10
 save 60 10000
 save 900 1
 save 300 10
 save 60 10000


@@ -97,7 +101,7 @@ dir ./
 
 # Set the max number of connected clients at the same time. By default there
 # is no limit, and it's up to the number of file descriptors the Redis process
 
 # Set the max number of connected clients at the same time. By default there
 # is no limit, and it's up to the number of file descriptors the Redis process

-# is able to open. The special value '0' means no limts.
+# is able to open. The special value '0' means no limits.

 # Once the limit is reached Redis will close all the new connections sending
 # an error 'max number of clients reached'.
 #
 # Once the limit is reached Redis will close all the new connections sending
 # an error 'max number of clients reached'.
 #


@@ -129,7 +133,7 @@ dir ./
 # happens this is the preferred way to run Redis. If instead you care a lot
 # about your data and don't want to that a single record can get lost you should
 # enable the append only mode: when this mode is enabled Redis will append
 # happens this is the preferred way to run Redis. If instead you care a lot
 # about your data and don't want to that a single record can get lost you should
 # enable the append only mode: when this mode is enabled Redis will append

-# every write operation received in the file appendonly.log. This file will
+# every write operation received in the file appendonly.aof. This file will

 # be read on startup in order to rebuild the full dataset in memory.
 #
 # Note that you can have both the async dumps and the append only file if you
 # be read on startup in order to rebuild the full dataset in memory.
 #
 # Note that you can have both the async dumps and the append only file if you


@@ -137,7 +141,7 @@ dir ./
 # Still if append only mode is enabled Redis will load the data from the
 # log file at startup ignoring the dump.rdb file.
 #
 # Still if append only mode is enabled Redis will load the data from the
 # log file at startup ignoring the dump.rdb file.
 #

-# The name of the append only file is "appendonly.log"
+# The name of the append only file is "appendonly.aof"

 #
 # IMPORTANT: Check the BGREWRITEAOF to check how to rewrite the append
 # log file in background when it gets too big.
 #
 # IMPORTANT: Check the BGREWRITEAOF to check how to rewrite the append
 # log file in background when it gets too big.


@@ -154,16 +158,96 @@ appendonly no
 # always: fsync after every write to the append only log . Slow, Safest.
 # everysec: fsync only if one second passed since the last fsync. Compromise.
 #
 # always: fsync after every write to the append only log . Slow, Safest.
 # everysec: fsync only if one second passed since the last fsync. Compromise.
 #

-# The default is "always" that's the safer of the options. It's up to you to
-# understand if you can relax this to "everysec" that will fsync every second
-# or to "no" that will let the operating system flush the output buffer when
-# it want, for better performances (but if you can live with the idea of
-# some data loss consider the default persistence mode that's snapshotting).
+# The default is "everysec" that's usually the right compromise between
+# speed and data safety. It's up to you to understand if you can relax this to
+# "no" that will will let the operating system flush the output buffer when
+# it wants, for better performances (but if you can live with the idea of
+# some data loss consider the default persistence mode that's snapshotting),
+# or on the contrary, use "always" that's very slow but a bit safer than
+# everysec.
+#
+# If unsure, use "everysec".

 
 

-appendfsync always
-# appendfsync everysec
+# appendfsync always
+appendfsync everysec

 # appendfsync no
 
 # appendfsync no
 

+################################ VIRTUAL MEMORY ###############################
+
+# Virtual Memory allows Redis to work with datasets bigger than the actual
+# amount of RAM needed to hold the whole dataset in memory.
+# In order to do so very used keys are taken in memory while the other keys
+# are swapped into a swap file, similarly to what operating systems do
+# with memory pages.
+#
+# To enable VM just set 'vm-enabled' to yes, and set the following three
+# VM parameters accordingly to your needs.
+
+vm-enabled no
+# vm-enabled yes
+
+# This is the path of the Redis swap file. As you can guess, swap files
+# can't be shared by different Redis instances, so make sure to use a swap
+# file for every redis process you are running.
+#
+# The swap file name may contain "%p" that is substituted with the PID of
+# the Redis process, so the default name /tmp/redis-%p.vm will work even
+# with multiple instances as Redis will use, for example, redis-811.vm
+# for one instance and redis-593.vm for another one.
+#
+# Useless to say, the best kind of disk for a Redis swap file (that's accessed
+# at random) is a Solid State Disk (SSD).
+#
+# *** WARNING *** if you are using a shared hosting the default of putting
+# the swap file under /tmp is not secure. Create a dir with access granted
+# only to Redis user and configure Redis to create the swap file there.
+vm-swap-file /tmp/redis-%p.vm
+
+# vm-max-memory configures the VM to use at max the specified amount of
+# RAM. Everything that deos not fit will be swapped on disk *if* possible, that
+# is, if there is still enough contiguous space in the swap file.
+#
+# With vm-max-memory 0 the system will swap everything it can. Not a good
+# default, just specify the max amount of RAM you can in bytes, but it's
+# better to leave some margin. For instance specify an amount of RAM
+# that's more or less between 60 and 80% of your free RAM.
+vm-max-memory 0
+
+# Redis swap files is split into pages. An object can be saved using multiple
+# contiguous pages, but pages can't be shared between different objects.
+# So if your page is too big, small objects swapped out on disk will waste
+# a lot of space. If you page is too small, there is less space in the swap
+# file (assuming you configured the same number of total swap file pages).
+#
+# If you use a lot of small objects, use a page size of 64 or 32 bytes.
+# If you use a lot of big objects, use a bigger page size.
+# If unsure, use the default :)
+vm-page-size 32
+
+# Number of total memory pages in the swap file.
+# Given that the page table (a bitmap of free/used pages) is taken in memory,
+# every 8 pages on disk will consume 1 byte of RAM.
+#
+# The total swap size is vm-page-size * vm-pages
+#
+# With the default of 32-bytes memory pages and 134217728 pages Redis will
+# use a 4 GB swap file, that will use 16 MB of RAM for the page table.
+#
+# It's better to use the smallest acceptable value for your application,
+# but the default is large in order to work in most conditions.
+vm-pages 134217728
+
+# Max number of VM I/O threads running at the same time.
+# This threads are used to read/write data from/to swap file, since they
+# also encode and decode objects from disk to memory or the reverse, a bigger
+# number of threads can help with big objects even if they can't help with
+# I/O itself as the physical device may not be able to couple with many
+# reads/writes operations at the same time.
+#
+# The special value of 0 turn off threaded I/O and enables the blocking
+# Virtual Memory implementation.
+vm-max-threads 4
+

 ############################### ADVANCED CONFIG ###############################
 
 # Glue small output buffers together in order to send small replies in a
 ############################### ADVANCED CONFIG ###############################
 
 # Glue small output buffers together in order to send small replies in a


@@ -171,19 +255,39 @@ appendfsync always
 # in terms of number of queries per second. Use 'yes' if unsure.
 glueoutputbuf yes
 
 # in terms of number of queries per second. Use 'yes' if unsure.
 glueoutputbuf yes
 

-# Use object sharing. Can save a lot of memory if you have many common
-# string in your dataset, but performs lookups against the shared objects
-# pool so it uses more CPU and can be a bit slower. Usually it's a good
-# idea.
-#
-# When object sharing is enabled (shareobjects yes) you can use
-# shareobjectspoolsize to control the size of the pool used in order to try
-# object sharing. A bigger pool size will lead to better sharing capabilities.
-# In general you want this value to be at least the double of the number of
-# very common strings you have in your dataset.
-#
-# WARNING: object sharing is experimental, don't enable this feature
-# in production before of Redis 1.0-stable. Still please try this feature in
-# your development environment so that we can test it better.
-shareobjects no
-shareobjectspoolsize 1024
+# Hashes are encoded in a special way (much more memory efficient) when they
+# have at max a given numer of elements, and the biggest element does not
+# exceed a given threshold. You can configure this limits with the following
+# configuration directives.
+hash-max-zipmap-entries 64
+hash-max-zipmap-value 512
+
+# Active rehashing uses 1 millisecond every 100 milliseconds of CPU time in
+# order to help rehashing the main Redis hash table (the one mapping top-level
+# keys to values). The hash table implementation redis uses (see dict.c)
+# performs a lazy rehashing: the more operation you run into an hash table
+# that is rhashing, the more rehashing "steps" are performed, so if the
+# server is idle the rehashing is never complete and some more memory is used
+# by the hash table.
+# 
+# The default is to use this millisecond 10 times every second in order to
+# active rehashing the main dictionaries, freeing memory when possible.
+#
+# If unsure:
+# use "activerehashing no" if you have hard latency requirements and it is
+# not a good thing in your environment that Redis can reply form time to time
+# to queries with 2 milliseconds delay.
+#
+# use "activerehashing yes" if you don't have such hard requirements but
+# want to free memory asap when possible.
+activerehashing yes
+
+################################## INCLUDES ###################################
+
+# Include one or more other config files here.  This is useful if you
+# have a standard template that goes to all redis server but also need
+# to customize a few per-server settings.  Include files can include
+# other files, so use this wisely.
+#
+# include /path/to/local.conf
+# include /path/to/other.conf