#include "redis.h"
#include <sys/uio.h>
+static void setProtocolError(redisClient *c, int pos);
+
+/* To evaluate the output buffer size of a client we need to get size of
+ * allocated objects, however we can't used zmalloc_size() directly on sds
+ * strings because of the trick they use to work (the header is before the
+ * returned pointer), so we use this helper function. */
+size_t zmalloc_size_sds(sds s) {
+ return zmalloc_size(s-sizeof(struct sdshdr));
+}
+
void *dupClientReplyValue(void *o) {
incrRefCount((robj*)o);
return o;
redisClient *createClient(int fd) {
redisClient *c = zmalloc(sizeof(redisClient));
- c->bufpos = 0;
/* passing -1 as fd it is possible to create a non connected client.
* This is useful since all the Redis commands needs to be executed
selectDb(c,0);
c->fd = fd;
+ c->bufpos = 0;
c->querybuf = sdsempty();
+ c->querybuf_peak = 0;
c->reqtype = 0;
c->argc = 0;
c->argv = NULL;
- c->cmd = NULL;
+ c->cmd = c->lastcmd = NULL;
c->multibulklen = 0;
c->bulklen = -1;
c->sentlen = 0;
c->flags = 0;
- c->lastinteraction = time(NULL);
+ c->ctime = c->lastinteraction = server.unixtime;
c->authenticated = 0;
c->replstate = REDIS_REPL_NONE;
+ c->slave_listening_port = 0;
c->reply = listCreate();
+ c->reply_bytes = 0;
+ c->obuf_soft_limit_reached_time = 0;
listSetFreeMethod(c->reply,decrRefCount);
listSetDupMethod(c->reply,dupClientReplyValue);
c->bpop.keys = NULL;
return c;
}
-/* Set the event loop to listen for write events on the client's socket.
- * Typically gets called every time a reply is built. */
-int _installWriteEvent(redisClient *c) {
+/* This function is called every time we are going to transmit new data
+ * to the client. The behavior is the following:
+ *
+ * If the client should receive new data (normal clients will) the function
+ * returns REDIS_OK, and make sure to install the write handler in our event
+ * loop so that when the socket is writable new data gets written.
+ *
+ * If the client should not receive new data, because it is a fake client
+ * or a slave, or because the setup of the write handler failed, the function
+ * returns REDIS_ERR.
+ *
+ * Typically gets called every time a reply is built, before adding more
+ * data to the clients output buffers. If the function returns REDIS_ERR no
+ * data should be appended to the output buffers. */
+int prepareClientToWrite(redisClient *c) {
if (c->flags & REDIS_LUA_CLIENT) return REDIS_OK;
- if (c->fd <= 0) return REDIS_ERR;
+ if (c->fd <= 0) return REDIS_ERR; /* Fake client */
if (c->bufpos == 0 && listLength(c->reply) == 0 &&
(c->replstate == REDIS_REPL_NONE ||
c->replstate == REDIS_REPL_ONLINE) &&
if (listLength(c->reply) == 0) {
incrRefCount(o);
listAddNodeTail(c->reply,o);
+ c->reply_bytes += zmalloc_size_sds(o->ptr);
} else {
tail = listNodeValue(listLast(c->reply));
if (tail->ptr != NULL &&
sdslen(tail->ptr)+sdslen(o->ptr) <= REDIS_REPLY_CHUNK_BYTES)
{
+ c->reply_bytes -= zmalloc_size_sds(tail->ptr);
tail = dupLastObjectIfNeeded(c->reply);
tail->ptr = sdscatlen(tail->ptr,o->ptr,sdslen(o->ptr));
+ c->reply_bytes += zmalloc_size_sds(tail->ptr);
} else {
incrRefCount(o);
listAddNodeTail(c->reply,o);
+ c->reply_bytes += zmalloc_size_sds(o->ptr);
}
}
+ asyncCloseClientOnOutputBufferLimitReached(c);
}
/* This method takes responsibility over the sds. When it is no longer
if (listLength(c->reply) == 0) {
listAddNodeTail(c->reply,createObject(REDIS_STRING,s));
+ c->reply_bytes += zmalloc_size_sds(s);
} else {
tail = listNodeValue(listLast(c->reply));
if (tail->ptr != NULL &&
sdslen(tail->ptr)+sdslen(s) <= REDIS_REPLY_CHUNK_BYTES)
{
+ c->reply_bytes -= zmalloc_size_sds(tail->ptr);
tail = dupLastObjectIfNeeded(c->reply);
tail->ptr = sdscatlen(tail->ptr,s,sdslen(s));
+ c->reply_bytes += zmalloc_size_sds(tail->ptr);
sdsfree(s);
} else {
listAddNodeTail(c->reply,createObject(REDIS_STRING,s));
+ c->reply_bytes += zmalloc_size_sds(s);
}
}
+ asyncCloseClientOnOutputBufferLimitReached(c);
}
void _addReplyStringToList(redisClient *c, char *s, size_t len) {
if (c->flags & REDIS_CLOSE_AFTER_REPLY) return;
if (listLength(c->reply) == 0) {
- listAddNodeTail(c->reply,createStringObject(s,len));
+ robj *o = createStringObject(s,len);
+
+ listAddNodeTail(c->reply,o);
+ c->reply_bytes += zmalloc_size_sds(o->ptr);
} else {
tail = listNodeValue(listLast(c->reply));
if (tail->ptr != NULL &&
sdslen(tail->ptr)+len <= REDIS_REPLY_CHUNK_BYTES)
{
+ c->reply_bytes -= zmalloc_size_sds(tail->ptr);
tail = dupLastObjectIfNeeded(c->reply);
tail->ptr = sdscatlen(tail->ptr,s,len);
+ c->reply_bytes += zmalloc_size_sds(tail->ptr);
} else {
- listAddNodeTail(c->reply,createStringObject(s,len));
+ robj *o = createStringObject(s,len);
+
+ listAddNodeTail(c->reply,o);
+ c->reply_bytes += zmalloc_size_sds(o->ptr);
}
}
+ asyncCloseClientOnOutputBufferLimitReached(c);
}
/* -----------------------------------------------------------------------------
* -------------------------------------------------------------------------- */
void addReply(redisClient *c, robj *obj) {
- if (_installWriteEvent(c) != REDIS_OK) return;
+ if (prepareClientToWrite(c) != REDIS_OK) return;
/* This is an important place where we can avoid copy-on-write
* when there is a saving child running, avoiding touching the
if (obj->encoding == REDIS_ENCODING_RAW) {
if (_addReplyToBuffer(c,obj->ptr,sdslen(obj->ptr)) != REDIS_OK)
_addReplyObjectToList(c,obj);
- } else {
- /* FIXME: convert the long into string and use _addReplyToBuffer()
- * instead of calling getDecodedObject. As this place in the
- * code is too performance critical. */
+ } else if (obj->encoding == REDIS_ENCODING_INT) {
+ /* Optimization: if there is room in the static buffer for 32 bytes
+ * (more than the max chars a 64 bit integer can take as string) we
+ * avoid decoding the object and go for the lower level approach. */
+ if (listLength(c->reply) == 0 && (sizeof(c->buf) - c->bufpos) >= 32) {
+ char buf[32];
+ int len;
+
+ len = ll2string(buf,sizeof(buf),(long)obj->ptr);
+ if (_addReplyToBuffer(c,buf,len) == REDIS_OK)
+ return;
+ /* else... continue with the normal code path, but should never
+ * happen actually since we verified there is room. */
+ }
obj = getDecodedObject(obj);
if (_addReplyToBuffer(c,obj->ptr,sdslen(obj->ptr)) != REDIS_OK)
_addReplyObjectToList(c,obj);
decrRefCount(obj);
+ } else {
+ redisPanic("Wrong obj->encoding in addReply()");
}
}
void addReplySds(redisClient *c, sds s) {
- if (_installWriteEvent(c) != REDIS_OK) {
+ if (prepareClientToWrite(c) != REDIS_OK) {
/* The caller expects the sds to be free'd. */
sdsfree(s);
return;
}
void addReplyString(redisClient *c, char *s, size_t len) {
- if (_installWriteEvent(c) != REDIS_OK) return;
+ if (prepareClientToWrite(c) != REDIS_OK) return;
if (_addReplyToBuffer(c,s,len) != REDIS_OK)
_addReplyStringToList(c,s,len);
}
-void _addReplyError(redisClient *c, char *s, size_t len) {
+void addReplyErrorLength(redisClient *c, char *s, size_t len) {
addReplyString(c,"-ERR ",5);
addReplyString(c,s,len);
addReplyString(c,"\r\n",2);
}
void addReplyError(redisClient *c, char *err) {
- _addReplyError(c,err,strlen(err));
+ addReplyErrorLength(c,err,strlen(err));
}
void addReplyErrorFormat(redisClient *c, const char *fmt, ...) {
for (j = 0; j < l; j++) {
if (s[j] == '\r' || s[j] == '\n') s[j] = ' ';
}
- _addReplyError(c,s,sdslen(s));
+ addReplyErrorLength(c,s,sdslen(s));
sdsfree(s);
}
-void _addReplyStatus(redisClient *c, char *s, size_t len) {
+void addReplyStatusLength(redisClient *c, char *s, size_t len) {
addReplyString(c,"+",1);
addReplyString(c,s,len);
addReplyString(c,"\r\n",2);
}
void addReplyStatus(redisClient *c, char *status) {
- _addReplyStatus(c,status,strlen(status));
+ addReplyStatusLength(c,status,strlen(status));
}
void addReplyStatusFormat(redisClient *c, const char *fmt, ...) {
va_start(ap,fmt);
sds s = sdscatvprintf(sdsempty(),fmt,ap);
va_end(ap);
- _addReplyStatus(c,s,sdslen(s));
+ addReplyStatusLength(c,s,sdslen(s));
sdsfree(s);
}
/* Note that we install the write event here even if the object is not
* ready to be sent, since we are sure that before returning to the
* event loop setDeferredMultiBulkLength() will be called. */
- if (_installWriteEvent(c) != REDIS_OK) return NULL;
+ if (prepareClientToWrite(c) != REDIS_OK) return NULL;
listAddNodeTail(c->reply,createObject(REDIS_STRING,NULL));
return listLast(c->reply);
}
len = listNodeValue(ln);
len->ptr = sdscatprintf(sdsempty(),"*%ld\r\n",length);
+ c->reply_bytes += zmalloc_size_sds(len->ptr);
if (ln->next != NULL) {
next = listNodeValue(ln->next);
/* Only glue when the next node is non-NULL (an sds in this case) */
if (next->ptr != NULL) {
+ c->reply_bytes -= zmalloc_size_sds(len->ptr);
+ c->reply_bytes -= zmalloc_size_sds(next->ptr);
len->ptr = sdscatlen(len->ptr,next->ptr,sdslen(next->ptr));
+ c->reply_bytes += zmalloc_size_sds(len->ptr);
listDelNode(c->reply,ln->next);
}
}
+ asyncCloseClientOnOutputBufferLimitReached(c);
}
/* Add a duble as a bulk reply */
/* Add a long long as integer reply or bulk len / multi bulk count.
* Basically this is used to output <prefix><long long><crlf>. */
-void _addReplyLongLong(redisClient *c, long long ll, char prefix) {
+void addReplyLongLongWithPrefix(redisClient *c, long long ll, char prefix) {
char buf[128];
int len;
+
+ /* Things like $3\r\n or *2\r\n are emitted very often by the protocol
+ * so we have a few shared objects to use if the integer is small
+ * like it is most of the times. */
+ if (prefix == '*' && ll < REDIS_SHARED_BULKHDR_LEN) {
+ addReply(c,shared.mbulkhdr[ll]);
+ return;
+ } else if (prefix == '$' && ll < REDIS_SHARED_BULKHDR_LEN) {
+ addReply(c,shared.bulkhdr[ll]);
+ return;
+ }
+
buf[0] = prefix;
len = ll2string(buf+1,sizeof(buf)-1,ll);
buf[len+1] = '\r';
else if (ll == 1)
addReply(c,shared.cone);
else
- _addReplyLongLong(c,ll,':');
+ addReplyLongLongWithPrefix(c,ll,':');
}
void addReplyMultiBulkLen(redisClient *c, long length) {
- _addReplyLongLong(c,length,'*');
+ addReplyLongLongWithPrefix(c,length,'*');
}
/* Create the length prefix of a bulk reply, example: $2234 */
len++;
}
}
- _addReplyLongLong(c,len,'$');
+ addReplyLongLongWithPrefix(c,len,'$');
}
/* Add a Redis Object as a bulk reply */
/* Add a C buffer as bulk reply */
void addReplyBulkCBuffer(redisClient *c, void *p, size_t len) {
- _addReplyLongLong(c,len,'$');
+ addReplyLongLongWithPrefix(c,len,'$');
addReplyString(c,p,len);
addReply(c,shared.crlf);
}
addReplyBulkCBuffer(c,buf,len);
}
+/* Copy 'src' client output buffers into 'dst' client output buffers.
+ * The function takes care of freeing the old output buffers of the
+ * destination client. */
+void copyClientOutputBuffer(redisClient *dst, redisClient *src) {
+ listRelease(dst->reply);
+ dst->reply = listDup(src->reply);
+ memcpy(dst->buf,src->buf,src->bufpos);
+ dst->bufpos = src->bufpos;
+ dst->reply_bytes = src->reply_bytes;
+}
+
static void acceptCommonHandler(int fd) {
redisClient *c;
if ((c = createClient(fd)) == NULL) {
if (write(c->fd,err,strlen(err)) == -1) {
/* Nothing to do, Just to avoid the warning... */
}
+ server.stat_rejected_conn++;
freeClient(c);
return;
}
c->cmd = NULL;
}
+/* Close all the slaves connections. This is useful in chained replication
+ * when we resync with our own master and want to force all our slaves to
+ * resync with us as well. */
+void disconnectSlaves(void) {
+ while (listLength(server.slaves)) {
+ listNode *ln = listFirst(server.slaves);
+ freeClient((redisClient*)ln->value);
+ }
+}
+
void freeClient(redisClient *c) {
listNode *ln;
+ /* If this is marked as current client unset it */
+ if (server.current_client == c) server.current_client = NULL;
+
/* Note that if the client we are freeing is blocked into a blocking
* call, we have to set querybuf to NULL *before* to call
* unblockClientWaitingData() to avoid processInputBuffer() will get
/* Case 2: we lost the connection with the master. */
if (c->flags & REDIS_MASTER) {
server.master = NULL;
- server.replstate = REDIS_REPL_CONNECT;
- server.repl_down_since = time(NULL);
- /* Since we lost the connection with the master, we should also
- * close the connection with all our slaves if we have any, so
- * when we'll resync with the master the other slaves will sync again
- * with us as well. Note that also when the slave is not connected
- * to the master it will keep refusing connections by other slaves.
+ server.repl_state = REDIS_REPL_CONNECT;
+ server.repl_down_since = server.unixtime;
+ /* We lost connection with our master, force our slaves to resync
+ * with us as well to load the new data set.
*
- * We do this only if server.masterhost != NULL. If it is NULL this
- * means the user called SLAVEOF NO ONE and we are freeing our
- * link with the master, so no need to close link with slaves. */
- if (server.masterhost != NULL) {
- while (listLength(server.slaves)) {
- ln = listFirst(server.slaves);
- freeClient((redisClient*)ln->value);
- }
- }
+ * If server.masterhost is NULL the user called SLAVEOF NO ONE so
+ * slave resync is not needed. */
+ if (server.masterhost != NULL) disconnectSlaves();
+ }
+
+ /* If this client was scheduled for async freeing we need to remove it
+ * from the queue. */
+ if (c->flags & REDIS_CLOSE_ASAP) {
+ ln = listSearchKey(server.clients_to_close,c);
+ redisAssert(ln != NULL);
+ listDelNode(server.clients_to_close,ln);
}
+
/* Release memory */
zfree(c->argv);
freeClientMultiState(c);
zfree(c);
}
+/* Schedule a client to free it at a safe time in the serverCron() function.
+ * This function is useful when we need to terminate a client but we are in
+ * a context where calling freeClient() is not possible, because the client
+ * should be valid for the continuation of the flow of the program. */
+void freeClientAsync(redisClient *c) {
+ if (c->flags & REDIS_CLOSE_ASAP) return;
+ c->flags |= REDIS_CLOSE_ASAP;
+ listAddNodeTail(server.clients_to_close,c);
+}
+
+void freeClientsInAsyncFreeQueue(void) {
+ while (listLength(server.clients_to_close)) {
+ listNode *ln = listFirst(server.clients_to_close);
+ redisClient *c = listNodeValue(ln);
+
+ c->flags &= ~REDIS_CLOSE_ASAP;
+ freeClient(c);
+ listDelNode(server.clients_to_close,ln);
+ }
+}
+
void sendReplyToClient(aeEventLoop *el, int fd, void *privdata, int mask) {
redisClient *c = privdata;
int nwritten = 0, totwritten = 0, objlen;
+ size_t objmem;
robj *o;
REDIS_NOTUSED(el);
REDIS_NOTUSED(mask);
} else {
o = listNodeValue(listFirst(c->reply));
objlen = sdslen(o->ptr);
+ objmem = zmalloc_size_sds(o->ptr);
if (objlen == 0) {
listDelNode(c->reply,listFirst(c->reply));
if (c->sentlen == objlen) {
listDelNode(c->reply,listFirst(c->reply));
c->sentlen = 0;
+ c->reply_bytes -= objmem;
}
}
- /* Note that we avoid to send more thank REDIS_MAX_WRITE_PER_EVENT
+ /* Note that we avoid to send more than REDIS_MAX_WRITE_PER_EVENT
* bytes, in a single threaded server it's a good idea to serve
* other clients as well, even if a very large request comes from
* super fast link that is always able to accept data (in real world
- * scenario think about 'KEYS *' against the loopback interfae) */
- if (totwritten > REDIS_MAX_WRITE_PER_EVENT) break;
+ * scenario think about 'KEYS *' against the loopback interface).
+ *
+ * However if we are over the maxmemory limit we ignore that and
+ * just deliver as much data as it is possible to deliver. */
+ if (totwritten > REDIS_MAX_WRITE_PER_EVENT &&
+ (server.maxmemory == 0 ||
+ zmalloc_used_memory() < server.maxmemory)) break;
}
if (nwritten == -1) {
if (errno == EAGAIN) {
return;
}
}
- if (totwritten > 0) c->lastinteraction = time(NULL);
+ if (totwritten > 0) c->lastinteraction = server.unixtime;
if (c->bufpos == 0 && listLength(c->reply) == 0) {
c->sentlen = 0;
aeDeleteFileEvent(server.el,c->fd,AE_WRITABLE);
if (!(c->flags & REDIS_MULTI)) c->flags &= (~REDIS_ASKING);
}
-void closeTimedoutClients(void) {
- redisClient *c;
- listNode *ln;
- time_t now = time(NULL);
- listIter li;
-
- listRewind(server.clients,&li);
- while ((ln = listNext(&li)) != NULL) {
- c = listNodeValue(ln);
- if (server.maxidletime &&
- !(c->flags & REDIS_SLAVE) && /* no timeout for slaves */
- !(c->flags & REDIS_MASTER) && /* no timeout for masters */
- !(c->flags & REDIS_BLOCKED) && /* no timeout for BLPOP */
- dictSize(c->pubsub_channels) == 0 && /* no timeout for pubsub */
- listLength(c->pubsub_patterns) == 0 &&
- (now - c->lastinteraction > server.maxidletime))
- {
- redisLog(REDIS_VERBOSE,"Closing idle client");
- freeClient(c);
- } else if (c->flags & REDIS_BLOCKED) {
- if (c->bpop.timeout != 0 && c->bpop.timeout < now) {
- addReply(c,shared.nullmultibulk);
- unblockClientWaitingData(c);
- }
- }
- }
-}
-
int processInlineBuffer(redisClient *c) {
char *newline = strstr(c->querybuf,"\r\n");
int argc, j;
size_t querylen;
/* Nothing to do without a \r\n */
- if (newline == NULL)
+ if (newline == NULL) {
+ if (sdslen(c->querybuf) > REDIS_INLINE_MAX_SIZE) {
+ addReplyError(c,"Protocol error: too big inline request");
+ setProtocolError(c,0);
+ }
return REDIS_ERR;
+ }
/* Split the input buffer up to the \r\n */
querylen = newline-(c->querybuf);
/* Helper function. Trims query buffer to make the function that processes
* multi bulk requests idempotent. */
static void setProtocolError(redisClient *c, int pos) {
+ if (server.verbosity >= REDIS_VERBOSE) {
+ sds client = getClientInfoString(c);
+ redisLog(REDIS_VERBOSE,
+ "Protocol error from client: %s", client);
+ sdsfree(client);
+ }
c->flags |= REDIS_CLOSE_AFTER_REPLY;
c->querybuf = sdsrange(c->querybuf,pos,-1);
}
/* Multi bulk length cannot be read without a \r\n */
newline = strchr(c->querybuf,'\r');
- if (newline == NULL)
+ if (newline == NULL) {
+ if (sdslen(c->querybuf) > REDIS_INLINE_MAX_SIZE) {
+ addReplyError(c,"Protocol error: too big mbulk count string");
+ setProtocolError(c,0);
+ }
return REDIS_ERR;
+ }
/* Buffer should also contain \n */
if (newline-(c->querybuf) > ((signed)sdslen(c->querybuf)-2))
/* Read bulk length if unknown */
if (c->bulklen == -1) {
newline = strchr(c->querybuf+pos,'\r');
- if (newline == NULL)
+ if (newline == NULL) {
+ if (sdslen(c->querybuf) > REDIS_INLINE_MAX_SIZE) {
+ addReplyError(c,"Protocol error: too big bulk count string");
+ setProtocolError(c,0);
+ }
break;
+ }
/* Buffer should also contain \n */
if (newline-(c->querybuf) > ((signed)sdslen(c->querybuf)-2))
if (pos) c->querybuf = sdsrange(c->querybuf,pos,-1);
/* We're done when c->multibulk == 0 */
- if (c->multibulklen == 0) {
- return REDIS_OK;
- }
+ if (c->multibulklen == 0) return REDIS_OK;
+
+ /* Still not read to process the command */
return REDIS_ERR;
}
REDIS_NOTUSED(el);
REDIS_NOTUSED(mask);
+ server.current_client = c;
readlen = REDIS_IOBUF_LEN;
/* If this is a multi bulk request, and we are processing a bulk reply
* that is large enough, try to maximize the probabilty that the query
}
qblen = sdslen(c->querybuf);
+ if (c->querybuf_peak < qblen) c->querybuf_peak = qblen;
c->querybuf = sdsMakeRoomFor(c->querybuf, readlen);
nread = read(fd, c->querybuf+qblen, readlen);
if (nread == -1) {
}
if (nread) {
sdsIncrLen(c->querybuf,nread);
- c->lastinteraction = time(NULL);
+ c->lastinteraction = server.unixtime;
} else {
+ server.current_client = NULL;
+ return;
+ }
+ if (sdslen(c->querybuf) > server.client_max_querybuf_len) {
+ sds ci = getClientInfoString(c), bytes = sdsempty();
+
+ bytes = sdscatrepr(bytes,c->querybuf,64);
+ redisLog(REDIS_WARNING,"Closing client that reached max query buffer length: %s (qbuf initial bytes: %s)", ci, bytes);
+ sdsfree(ci);
+ sdsfree(bytes);
+ freeClient(c);
return;
}
processInputBuffer(c);
+ server.current_client = NULL;
}
void getClientsMaxBuffers(unsigned long *longest_output_list,
sds getClientInfoString(redisClient *client) {
char ip[32], flags[16], events[3], *p;
int port;
- time_t now = time(NULL);
int emask;
- if (anetPeerToString(client->fd,ip,&port) == -1) {
- ip[0] = '?';
- ip[1] = '\0';
- port = 0;
- }
+ anetPeerToString(client->fd,ip,&port);
p = flags;
if (client->flags & REDIS_SLAVE) {
if (client->flags & REDIS_MONITOR)
*p++ = 'S';
}
if (client->flags & REDIS_MASTER) *p++ = 'M';
- if (p == flags) *p++ = 'N';
if (client->flags & REDIS_MULTI) *p++ = 'x';
if (client->flags & REDIS_BLOCKED) *p++ = 'b';
if (client->flags & REDIS_DIRTY_CAS) *p++ = 'd';
if (client->flags & REDIS_CLOSE_AFTER_REPLY) *p++ = 'c';
if (client->flags & REDIS_UNBLOCKED) *p++ = 'u';
+ if (client->flags & REDIS_CLOSE_ASAP) *p++ = 'A';
+ if (p == flags) *p++ = 'N';
*p++ = '\0';
emask = client->fd == -1 ? 0 : aeGetFileEvents(server.el,client->fd);
if (emask & AE_WRITABLE) *p++ = 'w';
*p = '\0';
return sdscatprintf(sdsempty(),
- "addr=%s:%d fd=%d idle=%ld flags=%s db=%d sub=%d psub=%d qbuf=%lu obl=%lu oll=%lu events=%s",
+ "addr=%s:%d fd=%d age=%ld idle=%ld flags=%s db=%d sub=%d psub=%d multi=%d qbuf=%lu qbuf-free=%lu obl=%lu oll=%lu omem=%lu events=%s cmd=%s",
ip,port,client->fd,
- (long)(now - client->lastinteraction),
+ (long)(server.unixtime - client->ctime),
+ (long)(server.unixtime - client->lastinteraction),
flags,
client->db->id,
(int) dictSize(client->pubsub_channels),
(int) listLength(client->pubsub_patterns),
+ (client->flags & REDIS_MULTI) ? client->mstate.count : -1,
(unsigned long) sdslen(client->querybuf),
+ (unsigned long) sdsavail(client->querybuf),
(unsigned long) client->bufpos,
(unsigned long) listLength(client->reply),
- events);
+ getClientOutputBufferMemoryUsage(client),
+ events,
+ client->lastcmd ? client->lastcmd->name : "NULL");
+}
+
+sds getAllClientsInfoString(void) {
+ listNode *ln;
+ listIter li;
+ redisClient *client;
+ sds o = sdsempty();
+
+ listRewind(server.clients,&li);
+ while ((ln = listNext(&li)) != NULL) {
+ sds cs;
+
+ client = listNodeValue(ln);
+ cs = getClientInfoString(client);
+ o = sdscatsds(o,cs);
+ sdsfree(cs);
+ o = sdscatlen(o,"\n",1);
+ }
+ return o;
}
void clientCommand(redisClient *c) {
redisClient *client;
if (!strcasecmp(c->argv[1]->ptr,"list") && c->argc == 2) {
- sds o = sdsempty();
-
- listRewind(server.clients,&li);
- while ((ln = listNext(&li)) != NULL) {
- client = listNodeValue(ln);
- o = sdscatsds(o,getClientInfoString(client));
- o = sdscatlen(o,"\n",1);
- }
+ sds o = getAllClientsInfoString();
addReplyBulkCBuffer(c,o,sdslen(o));
sdsfree(o);
} else if (!strcasecmp(c->argv[1]->ptr,"kill") && c->argc == 3) {
redisAssertWithInfo(c,NULL,c->cmd != NULL);
}
}
+
+/* This function returns the number of bytes that Redis is virtually
+ * using to store the reply still not read by the client.
+ * It is "virtual" since the reply output list may contain objects that
+ * are shared and are not really using additional memory.
+ *
+ * The function returns the total sum of the length of all the objects
+ * stored in the output list, plus the memory used to allocate every
+ * list node. The static reply buffer is not taken into account since it
+ * is allocated anyway.
+ *
+ * Note: this function is very fast so can be called as many time as
+ * the caller wishes. The main usage of this function currently is
+ * enforcing the client output length limits. */
+unsigned long getClientOutputBufferMemoryUsage(redisClient *c) {
+ unsigned long list_item_size = sizeof(listNode)+sizeof(robj);
+
+ return c->reply_bytes + (list_item_size*listLength(c->reply));
+}
+
+/* Get the class of a client, used in order to envorce limits to different
+ * classes of clients.
+ *
+ * The function will return one of the following:
+ * REDIS_CLIENT_LIMIT_CLASS_NORMAL -> Normal client
+ * REDIS_CLIENT_LIMIT_CLASS_SLAVE -> Slave or client executing MONITOR command
+ * REDIS_CLIENT_LIMIT_CLASS_PUBSUB -> Client subscribed to Pub/Sub channels
+ */
+int getClientLimitClass(redisClient *c) {
+ if (c->flags & REDIS_SLAVE) return REDIS_CLIENT_LIMIT_CLASS_SLAVE;
+ if (dictSize(c->pubsub_channels) || listLength(c->pubsub_patterns))
+ return REDIS_CLIENT_LIMIT_CLASS_PUBSUB;
+ return REDIS_CLIENT_LIMIT_CLASS_NORMAL;
+}
+
+int getClientLimitClassByName(char *name) {
+ if (!strcasecmp(name,"normal")) return REDIS_CLIENT_LIMIT_CLASS_NORMAL;
+ else if (!strcasecmp(name,"slave")) return REDIS_CLIENT_LIMIT_CLASS_SLAVE;
+ else if (!strcasecmp(name,"pubsub")) return REDIS_CLIENT_LIMIT_CLASS_PUBSUB;
+ else return -1;
+}
+
+char *getClientLimitClassName(int class) {
+ switch(class) {
+ case REDIS_CLIENT_LIMIT_CLASS_NORMAL: return "normal";
+ case REDIS_CLIENT_LIMIT_CLASS_SLAVE: return "slave";
+ case REDIS_CLIENT_LIMIT_CLASS_PUBSUB: return "pubsub";
+ default: return NULL;
+ }
+}
+
+/* The function checks if the client reached output buffer soft or hard
+ * limit, and also update the state needed to check the soft limit as
+ * a side effect.
+ *
+ * Return value: non-zero if the client reached the soft or the hard limit.
+ * Otherwise zero is returned. */
+int checkClientOutputBufferLimits(redisClient *c) {
+ int soft = 0, hard = 0, class;
+ unsigned long used_mem = getClientOutputBufferMemoryUsage(c);
+
+ class = getClientLimitClass(c);
+ if (server.client_obuf_limits[class].hard_limit_bytes &&
+ used_mem >= server.client_obuf_limits[class].hard_limit_bytes)
+ hard = 1;
+ if (server.client_obuf_limits[class].soft_limit_bytes &&
+ used_mem >= server.client_obuf_limits[class].soft_limit_bytes)
+ soft = 1;
+
+ /* We need to check if the soft limit is reached continuously for the
+ * specified amount of seconds. */
+ if (soft) {
+ if (c->obuf_soft_limit_reached_time == 0) {
+ c->obuf_soft_limit_reached_time = server.unixtime;
+ soft = 0; /* First time we see the soft limit reached */
+ } else {
+ time_t elapsed = server.unixtime - c->obuf_soft_limit_reached_time;
+
+ if (elapsed <=
+ server.client_obuf_limits[class].soft_limit_seconds) {
+ soft = 0; /* The client still did not reached the max number of
+ seconds for the soft limit to be considered
+ reached. */
+ }
+ }
+ } else {
+ c->obuf_soft_limit_reached_time = 0;
+ }
+ return soft || hard;
+}
+
+/* Asynchronously close a client if soft or hard limit is reached on the
+ * output buffer size. The caller can check if the client will be closed
+ * checking if the client REDIS_CLOSE_ASAP flag is set.
+ *
+ * Note: we need to close the client asynchronously because this function is
+ * called from contexts where the client can't be freed safely, i.e. from the
+ * lower level functions pushing data inside the client output buffers. */
+void asyncCloseClientOnOutputBufferLimitReached(redisClient *c) {
+ redisAssert(c->reply_bytes < ULONG_MAX-(1024*64));
+ if (c->reply_bytes == 0 || c->flags & REDIS_CLOSE_ASAP) return;
+ if (checkClientOutputBufferLimits(c)) {
+ sds client = getClientInfoString(c);
+
+ freeClientAsync(c);
+ redisLog(REDIS_WARNING,"Client %s scheduled to be closed ASAP for overcoming of output buffer limits.", client);
+ sdsfree(client);
+ }
+}
+
+/* Helper function used by freeMemoryIfNeeded() in order to flush slaves
+ * output buffers without returning control to the event loop. */
+void flushSlavesOutputBuffers(void) {
+ listIter li;
+ listNode *ln;
+
+ listRewind(server.slaves,&li);
+ while((ln = listNext(&li))) {
+ redisClient *slave = listNodeValue(ln);
+ int events;
+
+ events = aeGetFileEvents(server.el,slave->fd);
+ if (events & AE_WRITABLE &&
+ slave->replstate == REDIS_REPL_ONLINE &&
+ listLength(slave->reply))
+ {
+ sendReplyToClient(server.el,slave->fd,slave,0);
+ }
+ }
+}
projects / redis.git / blobdiff