c->reqtype = 0;
c->argc = 0;
c->argv = NULL;
+ c->cmd = NULL;
c->multibulklen = 0;
c->bulklen = -1;
c->sentlen = 0;
* connection. Note that we create the client instead to check before
* for this condition, since now the socket is already set in nonblocking
* mode and we can send an error for free using the Kernel I/O */
- if (server.maxclients && listLength(server.clients) > server.maxclients) {
+ if (listLength(server.clients) > server.maxclients) {
char *err = "-ERR max number of clients reached\r\n";
/* That's a best effort error message, don't check write errors */
for (j = 0; j < c->argc; j++)
decrRefCount(c->argv[j]);
c->argc = 0;
+ c->cmd = NULL;
}
void freeClient(redisClient *c) {
redisAssert(ln != NULL);
listDelNode(server.unblocked_clients,ln);
}
- /* Remove from the list of clients waiting for swapped keys, or ready
- * to be restarted, but not yet woken up again. */
- if (c->flags & REDIS_IO_WAIT) {
- redisAssert(server.ds_enabled);
- if (listLength(c->io_keys) == 0) {
- ln = listSearchKey(server.io_ready_clients,c);
-
- /* When this client is waiting to be woken up (REDIS_IO_WAIT),
- * it should be present in the list io_ready_clients */
- redisAssert(ln != NULL);
- listDelNode(server.io_ready_clients,ln);
- } else {
- while (listLength(c->io_keys)) {
- ln = listFirst(c->io_keys);
- dontWaitForSwappedKey(c,ln->value);
- }
- }
- server.cache_blocked_clients--;
- }
listRelease(c->io_keys);
/* Master/slave cleanup.
* Case 1: we lost the connection with a slave. */
if (c->flags & REDIS_MASTER) {
server.master = NULL;
server.replstate = REDIS_REPL_CONNECT;
+ server.repl_down_since = time(NULL);
/* Since we lost the connection with the master, we should also
* close the connection with all our slaves if we have any, so
* when we'll resync with the master the other slaves will sync again
}
}
if (totwritten > 0) c->lastinteraction = time(NULL);
- if (listLength(c->reply) == 0) {
+ if (c->bufpos == 0 && listLength(c->reply) == 0) {
c->sentlen = 0;
aeDeleteFileEvent(server.el,c->fd,AE_WRITABLE);
c->reqtype = 0;
c->multibulklen = 0;
c->bulklen = -1;
+ /* We clear the ASKING flag as well if we are not inside a MULTI. */
+ if (!(c->flags & REDIS_MULTI)) c->flags &= (~REDIS_ASKING);
}
void closeTimedoutClients(void) {
if (c->multibulklen == 0) {
/* The client should have been reset */
- redisAssert(c->argc == 0);
+ redisAssertWithInfo(c,NULL,c->argc == 0);
/* Multi bulk length cannot be read without a \r\n */
newline = strchr(c->querybuf,'\r');
/* We know for sure there is a whole line since newline != NULL,
* so go ahead and find out the multi bulk length. */
- redisAssert(c->querybuf[0] == '*');
+ redisAssertWithInfo(c,NULL,c->querybuf[0] == '*');
ok = string2ll(c->querybuf+1,newline-(c->querybuf+1),&ll);
if (!ok || ll > 1024*1024) {
addReplyError(c,"Protocol error: invalid multibulk length");
c->argv = zmalloc(sizeof(robj*)*c->multibulklen);
}
- redisAssert(c->multibulklen > 0);
+ redisAssertWithInfo(c,NULL,c->multibulklen > 0);
while(c->multibulklen) {
/* Read bulk length if unknown */
if (c->bulklen == -1) {
}
pos += newline-(c->querybuf+pos)+2;
+#ifdef REDIS_MBULK_BIG_ARG
+ if (ll >= REDIS_MBULK_BIG_ARG) {
+ /* If we are going to read a large object from network
+ * try to make it likely that it will start at c->querybuf
+ * boundary so that we can optimized object creation
+ * avoiding a large copy of data. */
+ c->querybuf = sdsrange(c->querybuf,pos,-1);
+ pos = 0;
+ }
+ /* Hint the sds library about the amount of bytes this string is
+ * going to contain. */
+ if (ll >= REDIS_MBULK_BIG_ARG)
+ c->querybuf = sdsMakeRoomFor(c->querybuf,ll+2);
+#endif
c->bulklen = ll;
}
/* Not enough data (+2 == trailing \r\n) */
break;
} else {
- c->argv[c->argc++] = createStringObject(c->querybuf+pos,c->bulklen);
- pos += c->bulklen+2;
+ /* Optimization: if the buffer contanins JUST our bulk element
+ * instead of creating a new object by *copying* the sds we
+ * just use the current sds string. */
+#ifdef REDIS_MBULK_BIG_ARG
+ if (pos == 0 &&
+ c->bulklen >= REDIS_MBULK_BIG_ARG &&
+ (signed) sdslen(c->querybuf) == c->bulklen+2)
+ {
+ // printf("HERE (arg %d)\n",c->argc);
+ c->argv[c->argc++] = createObject(REDIS_STRING,c->querybuf);
+ sdsIncrLen(c->querybuf,-2); /* remove CRLF */
+ c->querybuf = sdsempty();
+ /* Assume that if we saw a fat argument we'll see another one
+ * likely... */
+ c->querybuf = sdsMakeRoomFor(c->querybuf,c->bulklen+2);
+ pos = 0;
+ } else {
+#endif
+ // printf("NOT HERE (arg %d) (pos %d)\n",c->argc, pos);
+ c->argv[c->argc++] =
+ createStringObject(c->querybuf+pos,c->bulklen);
+ pos += c->bulklen+2;
+#ifdef REDIS_MBULK_BIG_ARG
+ }
+#endif
c->bulklen = -1;
c->multibulklen--;
}
}
/* Trim to pos */
- c->querybuf = sdsrange(c->querybuf,pos,-1);
+ if (pos) c->querybuf = sdsrange(c->querybuf,pos,-1);
/* We're done when c->multibulk == 0 */
if (c->multibulklen == 0) {
/* Keep processing while there is something in the input buffer */
while(sdslen(c->querybuf)) {
/* Immediately abort if the client is in the middle of something. */
- if (c->flags & REDIS_BLOCKED || c->flags & REDIS_IO_WAIT) return;
+ if (c->flags & REDIS_BLOCKED) return;
/* REDIS_CLOSE_AFTER_REPLY closes the connection once the reply is
* written to the client. Make sure to not let the reply grow after
void readQueryFromClient(aeEventLoop *el, int fd, void *privdata, int mask) {
redisClient *c = (redisClient*) privdata;
- char buf[REDIS_IOBUF_LEN];
- int nread;
+ int nread, readlen;
+ size_t qblen;
REDIS_NOTUSED(el);
REDIS_NOTUSED(mask);
- nread = read(fd, buf, REDIS_IOBUF_LEN);
+ readlen = REDIS_IOBUF_LEN;
+#if REDIS_MBULK_BIG_ARG
+ /* If this is a multi bulk request, and we are processing a bulk reply
+ * that is large enough, try to maximize the probabilty that the query
+ * buffer contains excatly the SDS string representing the object, even
+ * at the risk of requring more read(2) calls. This way the function
+ * processMultiBulkBuffer() can avoid copying buffers to create the
+ * Redis Object representing the argument. */
+ if (c->reqtype == REDIS_REQ_MULTIBULK && c->multibulklen && c->bulklen != -1
+ && c->bulklen >= REDIS_MBULK_BIG_ARG)
+ {
+ int remaining = (unsigned)(c->bulklen+2)-sdslen(c->querybuf);
+
+ if (remaining < readlen) readlen = remaining;
+ }
+#endif
+
+ qblen = sdslen(c->querybuf);
+ c->querybuf = sdsMakeRoomFor(c->querybuf, readlen);
+ nread = read(fd, c->querybuf+qblen, readlen);
if (nread == -1) {
if (errno == EAGAIN) {
nread = 0;
return;
}
if (nread) {
- c->querybuf = sdscatlen(c->querybuf,buf,nread);
+ sdsIncrLen(c->querybuf,nread);
c->lastinteraction = time(NULL);
} else {
return;
if (p == flags) *p++ = 'N';
if (client->flags & REDIS_MULTI) *p++ = 'x';
if (client->flags & REDIS_BLOCKED) *p++ = 'b';
- if (client->flags & REDIS_IO_WAIT) *p++ = 'i';
if (client->flags & REDIS_DIRTY_CAS) *p++ = 'd';
if (client->flags & REDIS_CLOSE_AFTER_REPLY) *p++ = 'c';
if (client->flags & REDIS_UNBLOCKED) *p++ = 'u';
addReplyError(c, "Syntax error, try CLIENT (LIST | KILL ip:port)");
}
}
+
+/* Rewrite the command vector of the client. All the new objects ref count
+ * is incremented. The old command vector is freed, and the old objects
+ * ref count is decremented. */
+void rewriteClientCommandVector(redisClient *c, int argc, ...) {
+ va_list ap;
+ int j;
+ robj **argv; /* The new argument vector */
+
+ argv = zmalloc(sizeof(robj*)*argc);
+ va_start(ap,argc);
+ for (j = 0; j < argc; j++) {
+ robj *a;
+
+ a = va_arg(ap, robj*);
+ argv[j] = a;
+ incrRefCount(a);
+ }
+ /* We free the objects in the original vector at the end, so we are
+ * sure that if the same objects are reused in the new vector the
+ * refcount gets incremented before it gets decremented. */
+ for (j = 0; j < c->argc; j++) decrRefCount(c->argv[j]);
+ zfree(c->argv);
+ /* Replace argv and argc with our new versions. */
+ c->argv = argv;
+ c->argc = argc;
+ c->cmd = lookupCommand(c->argv[0]->ptr);
+ redisAssertWithInfo(c,NULL,c->cmd != NULL);
+ va_end(ap);
+}
+
+/* Rewrite a single item in the command vector.
+ * The new val ref count is incremented, and the old decremented. */
+void rewriteClientCommandArgument(redisClient *c, int i, robj *newval) {
+ robj *oldval;
+
+ redisAssertWithInfo(c,NULL,i < c->argc);
+ oldval = c->argv[i];
+ c->argv[i] = newval;
+ incrRefCount(newval);
+ decrRefCount(oldval);
+
+ /* If this is the command name make sure to fix c->cmd. */
+ if (i == 0) {
+ c->cmd = lookupCommand(c->argv[0]->ptr);
+ redisAssertWithInfo(c,NULL,c->cmd != NULL);
+ }
+}
projects / redis.git / blobdiff