-# aclocal.m4 generated automatically by aclocal 1.5
-
-# Copyright 1996, 1997, 1998, 1999, 2000, 2001
-# Free Software Foundation, Inc.
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-# Do all the work for Automake. This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 5
-
-# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
-# written in clear, in which case automake, when reading aclocal.m4,
-# will think it sees a *use*, and therefore will trigger all it's
-# C support machinery. Also note that it means that autoscan, seeing
-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
-
-
-# We require 2.13 because we rely on SHELL being computed by configure.
-AC_PREREQ([2.13])
-
-# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
-# -----------------------------------------------------------
-# If MACRO-NAME is provided do IF-PROVIDED, else IF-NOT-PROVIDED.
-# The purpose of this macro is to provide the user with a means to
-# check macros which are provided without letting her know how the
-# information is coded.
-# If this macro is not defined by Autoconf, define it here.
-ifdef([AC_PROVIDE_IFELSE],
- [],
- [define([AC_PROVIDE_IFELSE],
- [ifdef([AC_PROVIDE_$1],
- [$2], [$3])])])
-
-
-# AM_INIT_AUTOMAKE(PACKAGE,VERSION, [NO-DEFINE])
-# ----------------------------------------------
-AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_REQUIRE([AC_PROG_INSTALL])dnl
-# test to see if srcdir already configured
-if test "`CDPATH=:; cd $srcdir && pwd`" != "`pwd`" &&
- test -f $srcdir/config.status; then
- AC_MSG_ERROR([source directory already configured; run \"make distclean\" there first])
-fi
-
-# Define the identity of the package.
-PACKAGE=$1
-AC_SUBST(PACKAGE)dnl
-VERSION=$2
-AC_SUBST(VERSION)dnl
-ifelse([$3],,
-[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])
-
-# Autoconf 2.50 wants to disallow AM_ names. We explicitly allow
-# the ones we care about.
-ifdef([m4_pattern_allow],
- [m4_pattern_allow([^AM_[A-Z]+FLAGS])])dnl
-
-# Autoconf 2.50 always computes EXEEXT. However we need to be
-# compatible with 2.13, for now. So we always define EXEEXT, but we
-# don't compute it.
-AC_SUBST(EXEEXT)
-# Similar for OBJEXT -- only we only use OBJEXT if the user actually
-# requests that it be used. This is a bit dumb.
-: ${OBJEXT=o}
-AC_SUBST(OBJEXT)
-
-# Some tools Automake needs.
-AC_REQUIRE([AM_SANITY_CHECK])dnl
-AC_REQUIRE([AC_ARG_PROGRAM])dnl
-AM_MISSING_PROG(ACLOCAL, aclocal)
-AM_MISSING_PROG(AUTOCONF, autoconf)
-AM_MISSING_PROG(AUTOMAKE, automake)
-AM_MISSING_PROG(AUTOHEADER, autoheader)
-AM_MISSING_PROG(MAKEINFO, makeinfo)
-AM_MISSING_PROG(AMTAR, tar)
-AM_PROG_INSTALL_SH
-AM_PROG_INSTALL_STRIP
-# We need awk for the "check" target. The system "awk" is bad on
-# some platforms.
-AC_REQUIRE([AC_PROG_AWK])dnl
-AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-AC_REQUIRE([AM_DEP_TRACK])dnl
-AC_REQUIRE([AM_SET_DEPDIR])dnl
-AC_PROVIDE_IFELSE([AC_PROG_][CC],
- [_AM_DEPENDENCIES(CC)],
- [define([AC_PROG_][CC],
- defn([AC_PROG_][CC])[_AM_DEPENDENCIES(CC)])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_][CXX],
- [_AM_DEPENDENCIES(CXX)],
- [define([AC_PROG_][CXX],
- defn([AC_PROG_][CXX])[_AM_DEPENDENCIES(CXX)])])dnl
-])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-# serial 3
-
-# AM_SANITY_CHECK
-# ---------------
-AC_DEFUN([AM_SANITY_CHECK],
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftest.file
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments. Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
- set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
- if test "$[*]" = "X"; then
- # -L didn't work.
- set X `ls -t $srcdir/configure conftest.file`
- fi
- rm -f conftest.file
- if test "$[*]" != "X $srcdir/configure conftest.file" \
- && test "$[*]" != "X conftest.file $srcdir/configure"; then
-
- # If neither matched, then we have a broken ls. This can happen
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
- AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
-alias in your environment])
- fi
-
- test "$[2]" = conftest.file
- )
-then
- # Ok.
- :
-else
- AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-AC_MSG_RESULT(yes)])
-
-
-# serial 2
-
-# AM_MISSING_PROG(NAME, PROGRAM)
-# ------------------------------
-AC_DEFUN([AM_MISSING_PROG],
-[AC_REQUIRE([AM_MISSING_HAS_RUN])
-$1=${$1-"${am_missing_run}$2"}
-AC_SUBST($1)])
-
-
-# AM_MISSING_HAS_RUN
-# ------------------
-# Define MISSING if not defined so far and test if it supports --run.
-# If it does, set am_missing_run to use it, otherwise, to nothing.
-AC_DEFUN([AM_MISSING_HAS_RUN],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
- am_missing_run="$MISSING --run "
-else
- am_missing_run=
- am_backtick='`'
- AC_MSG_WARN([${am_backtick}missing' script is too old or missing])
-fi
-])
-
-# AM_AUX_DIR_EXPAND
-
-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
-# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
-# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
-#
-# Of course, Automake must honor this variable whenever it calls a
-# tool from the auxiliary directory. The problem is that $srcdir (and
-# therefore $ac_aux_dir as well) can be either absolute or relative,
-# depending on how configure is run. This is pretty annoying, since
-# it makes $ac_aux_dir quite unusable in subdirectories: in the top
-# source directory, any form will work fine, but in subdirectories a
-# relative path needs to be adjusted first.
-#
-# $ac_aux_dir/missing
-# fails when called from a subdirectory if $ac_aux_dir is relative
-# $top_srcdir/$ac_aux_dir/missing
-# fails if $ac_aux_dir is absolute,
-# fails when called from a subdirectory in a VPATH build with
-# a relative $ac_aux_dir
-#
-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
-# are both prefixed by $srcdir. In an in-source build this is usually
-# harmless because $srcdir is `.', but things will broke when you
-# start a VPATH build or use an absolute $srcdir.
-#
-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
-# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
-# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
-# and then we would define $MISSING as
-# MISSING="\${SHELL} $am_aux_dir/missing"
-# This will work as long as MISSING is not called from configure, because
-# unfortunately $(top_srcdir) has no meaning in configure.
-# However there are other variables, like CC, which are often used in
-# configure, and could therefore not use this "fixed" $ac_aux_dir.
-#
-# Another solution, used here, is to always expand $ac_aux_dir to an
-# absolute PATH. The drawback is that using absolute paths prevent a
-# configured tree to be moved without reconfiguration.
-
-AC_DEFUN([AM_AUX_DIR_EXPAND], [
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`CDPATH=:; cd $ac_aux_dir && pwd`
-])
-
-# AM_PROG_INSTALL_SH
-# ------------------
-# Define $install_sh.
-AC_DEFUN([AM_PROG_INSTALL_SH],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-install_sh=${install_sh-"$am_aux_dir/install-sh"}
-AC_SUBST(install_sh)])
-
-# One issue with vendor `install' (even GNU) is that you can't
-# specify the program used to strip binaries. This is especially
-# annoying in cross-compiling environments, where the build's strip
-# is unlikely to handle the host's binaries.
-# Fortunately install-sh will honor a STRIPPROG variable, so we
-# always use install-sh in `make install-strip', and initialize
-# STRIPPROG with the value of the STRIP variable (set by the user).
-AC_DEFUN([AM_PROG_INSTALL_STRIP],
-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
-AC_SUBST([INSTALL_STRIP_PROGRAM])])
-
-# serial 4 -*- Autoconf -*-
-
-
-
-# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
-# written in clear, in which case automake, when reading aclocal.m4,
-# will think it sees a *use*, and therefore will trigger all it's
-# C support machinery. Also note that it means that autoscan, seeing
-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
-
-
-
-# _AM_DEPENDENCIES(NAME)
-# ---------------------
-# See how the compiler implements dependency checking.
-# NAME is "CC", "CXX" or "OBJC".
-# We try a few techniques and use that to set a single cache variable.
-#
-# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
-# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
-# dependency, and given that the user is not expected to run this macro,
-# just rely on AC_PROG_CC.
-AC_DEFUN([_AM_DEPENDENCIES],
-[AC_REQUIRE([AM_SET_DEPDIR])dnl
-AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
-AC_REQUIRE([AM_MAKE_INCLUDE])dnl
-AC_REQUIRE([AM_DEP_TRACK])dnl
-
-ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
- [$1], CXX, [depcc="$CXX" am_compiler_list=],
- [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc']
- [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
- [depcc="$$1" am_compiler_list=])
-
-AC_CACHE_CHECK([dependency style of $depcc],
- [am_cv_$1_dependencies_compiler_type],
-[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named `D' -- because `-MD' means `put the output
- # in D'.
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
-
- am_cv_$1_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
- fi
- for depmode in $am_compiler_list; do
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- echo '#include "conftest.h"' > conftest.c
- echo 'int i;' > conftest.h
- echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf
-
- case $depmode in
- nosideeffect)
- # after this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- none) break ;;
- esac
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this.
- if depmode=$depmode \
- source=conftest.c object=conftest.o \
- depfile=conftest.Po tmpdepfile=conftest.TPo \
- $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 &&
- grep conftest.h conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- am_cv_$1_dependencies_compiler_type=$depmode
- break
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_$1_dependencies_compiler_type=none
-fi
-])
-$1DEPMODE="depmode=$am_cv_$1_dependencies_compiler_type"
-AC_SUBST([$1DEPMODE])
-])
-
-
-# AM_SET_DEPDIR
-# -------------
-# Choose a directory name for dependency files.
-# This macro is AC_REQUIREd in _AM_DEPENDENCIES
-AC_DEFUN([AM_SET_DEPDIR],
-[rm -f .deps 2>/dev/null
-mkdir .deps 2>/dev/null
-if test -d .deps; then
- DEPDIR=.deps
-else
- # MS-DOS does not allow filenames that begin with a dot.
- DEPDIR=_deps
-fi
-rmdir .deps 2>/dev/null
-AC_SUBST(DEPDIR)
-])
-
-
-# AM_DEP_TRACK
-# ------------
-AC_DEFUN([AM_DEP_TRACK],
-[AC_ARG_ENABLE(dependency-tracking,
-[ --disable-dependency-tracking Speeds up one-time builds
- --enable-dependency-tracking Do not reject slow dependency extractors])
-if test "x$enable_dependency_tracking" != xno; then
- am_depcomp="$ac_aux_dir/depcomp"
- AMDEPBACKSLASH='\'
-fi
-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-pushdef([subst], defn([AC_SUBST]))
-subst(AMDEPBACKSLASH)
-popdef([subst])
-])
-
-# Generate code to set up dependency tracking.
-# This macro should only be invoked once -- use via AC_REQUIRE.
-# Usage:
-# AM_OUTPUT_DEPENDENCY_COMMANDS
-
-#
-# This code is only required when automatic dependency tracking
-# is enabled. FIXME. This creates each `.P' file that we will
-# need in order to bootstrap the dependency handling code.
-AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],[
-AC_OUTPUT_COMMANDS([
-test x"$AMDEP_TRUE" != x"" ||
-for mf in $CONFIG_FILES; do
- case "$mf" in
- Makefile) dirpart=.;;
- */Makefile) dirpart=`echo "$mf" | sed -e 's|/[^/]*$||'`;;
- *) continue;;
- esac
- grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue
- # Extract the definition of DEP_FILES from the Makefile without
- # running `make'.
- DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"`
- test -z "$DEPDIR" && continue
- # When using ansi2knr, U may be empty or an underscore; expand it
- U=`sed -n -e '/^U = / s///p' < "$mf"`
- test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
- # We invoke sed twice because it is the simplest approach to
- # changing $(DEPDIR) to its actual value in the expansion.
- for file in `sed -n -e '
- /^DEP_FILES = .*\\\\$/ {
- s/^DEP_FILES = //
- :loop
- s/\\\\$//
- p
- n
- /\\\\$/ b loop
- p
- }
- /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`echo "$file" | sed -e 's|/[^/]*$||'`
- $ac_aux_dir/mkinstalldirs "$dirpart/$fdir" > /dev/null 2>&1
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
- done
-done
-], [AMDEP_TRUE="$AMDEP_TRUE"
-ac_aux_dir="$ac_aux_dir"])])
-
-# AM_MAKE_INCLUDE()
-# -----------------
-# Check to see how make treats includes.
-AC_DEFUN([AM_MAKE_INCLUDE],
-[am_make=${MAKE-make}
-cat > confinc << 'END'
-doit:
- @echo done
-END
-# If we don't find an include directive, just comment out the code.
-AC_MSG_CHECKING([for style of include used by $am_make])
-am__include='#'
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | fgrep -v 'ing directory'`" = "done"; then
- am__include=include
- am__quote=
- _am_result=GNU
-fi
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
- echo '.include "confinc"' > confmf
- if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
- am__include=.include
- am__quote='"'
- _am_result=BSD
- fi
-fi
-AC_SUBST(am__include)
-AC_SUBST(am__quote)
-AC_MSG_RESULT($_am_result)
-rm -f confinc confmf
-])
-
-# serial 3
-
-# AM_CONDITIONAL(NAME, SHELL-CONDITION)
-# -------------------------------------
-# Define a conditional.
-#
-# FIXME: Once using 2.50, use this:
-# m4_match([$1], [^TRUE\|FALSE$], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_DEFUN([AM_CONDITIONAL],
-[ifelse([$1], [TRUE],
- [errprint(__file__:__line__: [$0: invalid condition: $1
-])dnl
-m4exit(1)])dnl
-ifelse([$1], [FALSE],
- [errprint(__file__:__line__: [$0: invalid condition: $1
-])dnl
-m4exit(1)])dnl
-AC_SUBST([$1_TRUE])
-AC_SUBST([$1_FALSE])
-if $2; then
- $1_TRUE=
- $1_FALSE='#'
-else
- $1_TRUE='#'
- $1_FALSE=
-fi])
-
-# Like AC_CONFIG_HEADER, but automatically create stamp file.
-
-# serial 3
-
-# When config.status generates a header, we must update the stamp-h file.
-# This file resides in the same directory as the config header
-# that is generated. We must strip everything past the first ":",
-# and everything past the last "/".
-
-AC_PREREQ([2.12])
-
-AC_DEFUN([AM_CONFIG_HEADER],
-[ifdef([AC_FOREACH],dnl
- [dnl init our file count if it isn't already
- m4_ifndef([_AM_Config_Header_Index], m4_define([_AM_Config_Header_Index], [0]))
- dnl prepare to store our destination file list for use in config.status
- AC_FOREACH([_AM_File], [$1],
- [m4_pushdef([_AM_Dest], m4_patsubst(_AM_File, [:.*]))
- m4_define([_AM_Config_Header_Index], m4_incr(_AM_Config_Header_Index))
- dnl and add it to the list of files AC keeps track of, along
- dnl with our hook
- AC_CONFIG_HEADERS(_AM_File,
-dnl COMMANDS, [, INIT-CMDS]
-[# update the timestamp
-echo timestamp >"AS_ESCAPE(_AM_DIRNAME(]_AM_Dest[))/stamp-h]_AM_Config_Header_Index["
-][$2]m4_ifval([$3], [, [$3]]))dnl AC_CONFIG_HEADERS
- m4_popdef([_AM_Dest])])],dnl
-[AC_CONFIG_HEADER([$1])
- AC_OUTPUT_COMMANDS(
- ifelse(patsubst([$1], [[^ ]], []),
- [],
- [test -z "$CONFIG_HEADERS" || echo timestamp >dnl
- patsubst([$1], [^\([^:]*/\)?.*], [\1])stamp-h]),dnl
-[am_indx=1
-for am_file in $1; do
- case " \$CONFIG_HEADERS " in
- *" \$am_file "*)
- am_dir=\`echo \$am_file |sed 's%:.*%%;s%[^/]*\$%%'\`
- if test -n "\$am_dir"; then
- am_tmpdir=\`echo \$am_dir |sed 's%^\(/*\).*\$%\1%'\`
- for am_subdir in \`echo \$am_dir |sed 's%/% %'\`; do
- am_tmpdir=\$am_tmpdir\$am_subdir/
- if test ! -d \$am_tmpdir; then
- mkdir \$am_tmpdir
- fi
- done
- fi
- echo timestamp > "\$am_dir"stamp-h\$am_indx
- ;;
- esac
- am_indx=\`expr \$am_indx + 1\`
-done])
-])]) # AM_CONFIG_HEADER
-
-# _AM_DIRNAME(PATH)
-# -----------------
-# Like AS_DIRNAME, only do it during macro expansion
-AC_DEFUN([_AM_DIRNAME],
- [m4_if(m4_regexp([$1], [^.*[^/]//*[^/][^/]*/*$]), -1,
- m4_if(m4_regexp([$1], [^//\([^/]\|$\)]), -1,
- m4_if(m4_regexp([$1], [^/.*]), -1,
- [.],
- m4_patsubst([$1], [^\(/\).*], [\1])),
- m4_patsubst([$1], [^\(//\)\([^/].*\|$\)], [\1])),
- m4_patsubst([$1], [^\(.*[^/]\)//*[^/][^/]*/*$], [\1]))[]dnl
-]) # _AM_DIRNAME
-
-
-# serial 2
-
-# Single argument says where are built sources to test, relative to the
-# built test directory. Maybe omitted if the same (flat distribution).
-
-AC_DEFUN([AT_CONFIG],
-[AT_TESTPATH=ifelse([$1], [], [.], [$1])
-AC_SUBST([AT_TESTPATH])
-# Try to be compatible with both Autoconf 2.13 and 2.50.
-if test -z "$ECHO_C$ECHO_N$ECHO_T"; then
- ECHO_C="$ac_c"
- ECHO_N="$ac_n"
- ECHO_T="$ac_t"
- AC_SUBST([ECHO_C])
- AC_SUBST([ECHO_N])
- AC_SUBST([ECHO_T])
-fi
-])
-
-#serial 1
-# This test replaces the one in autoconf.
-# Currently this macro should have the same name as the autoconf macro
-# because gettext's gettext.m4 (distributed in the automake package)
-# still uses it. Otherwise, the use in gettext.m4 makes autoheader
-# give these diagnostics:
-# configure.in:556: AC_TRY_COMPILE was called before AC_ISC_POSIX
-# configure.in:556: AC_TRY_RUN was called before AC_ISC_POSIX
-
-undefine([AC_ISC_POSIX])
-
-AC_DEFUN([AC_ISC_POSIX],
- [
- dnl This test replaces the obsolescent AC_ISC_POSIX kludge.
- AC_CHECK_LIB(cposix, strerror, [LIBS="$LIBS -lcposix"])
- ]
-)
-
-
-# serial 1
-
-# @defmac AC_PROG_CC_STDC
-# @maindex PROG_CC_STDC
-# @ovindex CC
-# If the C compiler in not in ANSI C mode by default, try to add an option
-# to output variable @code{CC} to make it so. This macro tries various
-# options that select ANSI C on some system or another. It considers the
-# compiler to be in ANSI C mode if it handles function prototypes correctly.
-#
-# If you use this macro, you should check after calling it whether the C
-# compiler has been set to accept ANSI C; if not, the shell variable
-# @code{am_cv_prog_cc_stdc} is set to @samp{no}. If you wrote your source
-# code in ANSI C, you can make an un-ANSIfied copy of it by using the
-# program @code{ansi2knr}, which comes with Ghostscript.
-# @end defmac
-
-AC_DEFUN([AM_PROG_CC_STDC],
-[AC_REQUIRE([AC_PROG_CC])
-AC_BEFORE([$0], [AC_C_INLINE])
-AC_BEFORE([$0], [AC_C_CONST])
-dnl Force this before AC_PROG_CPP. Some cpp's, eg on HPUX, require
-dnl a magic option to avoid problems with ANSI preprocessor commands
-dnl like #elif.
-dnl FIXME: can't do this because then AC_AIX won't work due to a
-dnl circular dependency.
-dnl AC_BEFORE([$0], [AC_PROG_CPP])
-AC_MSG_CHECKING([for ${CC-cc} option to accept ANSI C])
-AC_CACHE_VAL(am_cv_prog_cc_stdc,
-[am_cv_prog_cc_stdc=no
-ac_save_CC="$CC"
-# Don't try gcc -ansi; that turns off useful extensions and
-# breaks some systems' header files.
-# AIX -qlanglvl=ansi
-# Ultrix and OSF/1 -std1
-# HP-UX 10.20 and later -Ae
-# HP-UX older versions -Aa -D_HPUX_SOURCE
-# SVR4 -Xc -D__EXTENSIONS__
-for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
- CC="$ac_save_CC $ac_arg"
- AC_TRY_COMPILE(
-[#include <stdarg.h>
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
- char **p;
- int i;
-{
- return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
- char *s;
- va_list v;
- va_start (v,p);
- s = g (p, va_arg (v,int));
- va_end (v);
- return s;
-}
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-], [
-return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
-],
-[am_cv_prog_cc_stdc="$ac_arg"; break])
-done
-CC="$ac_save_CC"
-])
-if test -z "$am_cv_prog_cc_stdc"; then
- AC_MSG_RESULT([none needed])
-else
- AC_MSG_RESULT([$am_cv_prog_cc_stdc])
-fi
-case "x$am_cv_prog_cc_stdc" in
- x|xno) ;;
- *) CC="$CC $am_cv_prog_cc_stdc" ;;
-esac
-])
-
-# serial 1 -*- Autoconf -*-
-
-# BISON_AC_PROG_GNU_M4
-# --------------------
-# Check for GNU m4, at least 1.3 (supports frozen files).
-AC_DEFUN([BISON_AC_PROG_GNU_M4],
-[AC_PATH_PROGS(M4, gm4 gnum4 m4, m4)
-AC_CACHE_CHECK([whether m4 supports frozen files],
- [ac_cv_prog_gnu_m4],
-[ac_cv_prog_gnu_m4=no
-if test x"$M4" != x; then
- case `$M4 --help < /dev/null 2>&1` in
- *reload-state*) ac_cv_prog_gnu_m4=yes ;;
- esac
-fi])
-])# BISON_AC_PROG_GNU_M4
-
-AC_DEFUN(BISON_WARNING,
-[AC_MSG_CHECKING(whether compiler accepts $1)
-AC_SUBST(WARNING_CFLAGS)
-ac_save_CFLAGS="$CFLAGS"
-CFLAGS="$CFLAGS $1"
-AC_TRY_COMPILE(,
-[int x;],
-WARNING_CFLAGS="$WARNING_CFLAGS $1"
-AC_MSG_RESULT(yes),
-AC_MSG_RESULT(no))
-CFLAGS="$ac_save_CFLAGS"])
-
-
-# serial 1
-
-AC_DEFUN([AM_C_PROTOTYPES],
-[AC_REQUIRE([AM_PROG_CC_STDC])
-AC_REQUIRE([AC_PROG_CPP])
-AC_MSG_CHECKING([for function prototypes])
-if test "$am_cv_prog_cc_stdc" != no; then
- AC_MSG_RESULT(yes)
- AC_DEFINE(PROTOTYPES,1,[Define if compiler has function prototypes])
- U= ANSI2KNR=
-else
- AC_MSG_RESULT(no)
- U=_ ANSI2KNR=./ansi2knr
-fi
-# Ensure some checks needed by ansi2knr itself.
-AC_HEADER_STDC
-AC_CHECK_HEADERS(string.h)
-AC_SUBST(U)dnl
-AC_SUBST(ANSI2KNR)dnl
-])
-
-#serial 3
-
-dnl From Jim Meyering.
-dnl Determine whether malloc accepts 0 as its argument.
-dnl If it doesn't, arrange to use the replacement function.
-dnl
-
-AC_DEFUN(jm_FUNC_MALLOC,
-[
- dnl xmalloc.c requires that this symbol be defined so it doesn't
- dnl mistakenly use a broken malloc -- as it might if this test were omitted.
- AC_DEFINE_UNQUOTED(HAVE_DONE_WORKING_MALLOC_CHECK, 1,
- [Define if the malloc check has been performed. ])
-
- AC_CACHE_CHECK([for working malloc], jm_cv_func_working_malloc,
- [AC_TRY_RUN([
- char *malloc ();
- int
- main ()
- {
- exit (malloc (0) ? 0 : 1);
- }
- ],
- jm_cv_func_working_malloc=yes,
- jm_cv_func_working_malloc=no,
- dnl When crosscompiling, assume malloc is broken.
- jm_cv_func_working_malloc=no)
- ])
- if test $jm_cv_func_working_malloc = no; then
- AC_SUBST(LIBOBJS)
- LIBOBJS="$LIBOBJS malloc.$ac_objext"
- AC_DEFINE_UNQUOTED(malloc, rpl_malloc,
- [Define to rpl_malloc if the replacement function should be used.])
- fi
-])
-
-#serial 3
-
-dnl From Jim Meyering.
-dnl Determine whether realloc works when both arguments are 0.
-dnl If it doesn't, arrange to use the replacement function.
-dnl
-
-AC_DEFUN(jm_FUNC_REALLOC,
-[
- dnl xmalloc.c requires that this symbol be defined so it doesn't
- dnl mistakenly use a broken realloc -- as it might if this test were omitted.
- AC_DEFINE_UNQUOTED(HAVE_DONE_WORKING_REALLOC_CHECK, 1,
- [Define if the realloc check has been performed. ])
-
- AC_CACHE_CHECK([for working realloc], jm_cv_func_working_realloc,
- [AC_TRY_RUN([
- char *realloc ();
- int
- main ()
- {
- exit (realloc (0, 0) ? 0 : 1);
- }
- ],
- jm_cv_func_working_realloc=yes,
- jm_cv_func_working_realloc=no,
- dnl When crosscompiling, assume realloc is broken.
- jm_cv_func_working_realloc=no)
- ])
- if test $jm_cv_func_working_realloc = no; then
- AC_SUBST(LIBOBJS)
- LIBOBJS="$LIBOBJS realloc.$ac_objext"
- AC_DEFINE_UNQUOTED(realloc, rpl_realloc,
- [Define to rpl_realloc if the replacement function should be used.])
- fi
-])
-
-#serial 1
-
-dnl These are the prerequisite macros for files in the lib/
-dnl directories of Bison.
-
-AC_DEFUN([jm_PREREQ_QUOTEARG],
-[
- AC_CHECK_FUNCS(isascii iswprint mbrtowc)
- AC_CHECK_HEADERS(limits.h stdlib.h string.h wchar.h wctype.h)
- AC_HEADER_STDC
- AC_C_BACKSLASH_A
- AC_MBSTATE_T
- AM_C_PROTOTYPES
-])
-
-#serial 3
-
-dnl From Paul Eggert.
-
-AC_DEFUN(AC_C_BACKSLASH_A,
-[
- AC_CACHE_CHECK([whether backslash-a works in strings], ac_cv_c_backslash_a,
- [AC_TRY_COMPILE([],
- [
-#if '\a' == 'a'
- syntax error;
-#endif
- char buf['\a' == 'a' ? -1 : 1];
- buf[0] = '\a';
- return buf[0] != "\a"[0];
- ],
- ac_cv_c_backslash_a=yes,
- ac_cv_c_backslash_a=no)])
- if test $ac_cv_c_backslash_a = yes; then
- AC_DEFINE(HAVE_C_BACKSLASH_A, 1,
- [Define if backslash-a works in C strings.])
- fi
-])
-
-# serial 8
-
-# From Paul Eggert.
-
-# BeOS 5 has <wchar.h> but does not define mbstate_t,
-# so you can't declare an object of that type.
-# Check for this incompatibility with Standard C.
-
-# Include stdlib.h first, because otherwise this test would fail on Linux
-# (at least glibc-2.1.3) because the "_XOPEN_SOURCE 500" definition elicits
-# a syntax error in wchar.h due to the use of undefined __int32_t.
-
-AC_DEFUN(AC_MBSTATE_T,
- [
- AC_CHECK_HEADERS(stdlib.h)
-
- AC_CACHE_CHECK([for mbstate_t], ac_cv_type_mbstate_t,
- [AC_TRY_COMPILE([
-#if HAVE_STDLIB_H
-# include <stdlib.h>
-#endif
-#include <wchar.h>],
- [mbstate_t x; return sizeof x;],
- ac_cv_type_mbstate_t=yes,
- ac_cv_type_mbstate_t=no)])
- if test $ac_cv_type_mbstate_t = no; then
- AC_DEFINE(mbstate_t, int,
- [Define to a type if <wchar.h> does not define.])
- fi])
-
-#serial 1
-
-dnl FIXME: put these prerequisite-only *.m4 files in a separate
-dnl directory -- otherwise, they'll conflict with existing files.
-
-dnl These are the prerequisite macros for GNU's error.c file.
-AC_DEFUN(jm_PREREQ_ERROR,
-[
- AC_CHECK_FUNCS(strerror strerror_r vprintf doprnt)
- AC_HEADER_STDC
- AC_FUNC_STRERROR_R
-])
-
-#serial 1002
-# Experimental replacement for the function in the latest CVS autoconf.
-# If the compile-test says strerror_r doesn't work, then resort to a
-# `run'-test that works on BeOS and segfaults on DEC Unix.
-# Use with the error.c file in ../lib.
-
-undefine([AC_FUNC_STRERROR_R])
-
-# AC_FUNC_STRERROR_R
-# ------------------
-AC_DEFUN([AC_FUNC_STRERROR_R],
-[AC_CHECK_DECLS([strerror_r])
-AC_CHECK_FUNCS([strerror_r])
-if test $ac_cv_func_strerror_r = yes; then
- AC_CHECK_HEADERS(string.h)
- AC_CACHE_CHECK([for working strerror_r],
- ac_cv_func_strerror_r_works,
- [
- AC_TRY_COMPILE(
- [
-# include <stdio.h>
-# if HAVE_STRING_H
-# include <string.h>
-# endif
- ],
- [
- char buf[100];
- char x = *strerror_r (0, buf, sizeof buf);
- ],
- ac_cv_func_strerror_r_works=yes,
- ac_cv_func_strerror_r_works=no
- )
- if test $ac_cv_func_strerror_r_works = no; then
- # strerror_r seems not to work, but now we have to choose between
- # systems that have relatively inaccessible declarations for the
- # function. BeOS and DEC UNIX 4.0 fall in this category, but the
- # former has a strerror_r that returns char*, while the latter
- # has a strerror_r that returns `int'.
- # This test should segfault on the DEC system.
- AC_TRY_RUN(
- [
-# include <stdio.h>
-# include <string.h>
-# include <ctype.h>
-
- extern char *strerror_r ();
-
- int
- main ()
- {
- char buf[100];
- char x = *strerror_r (0, buf, sizeof buf);
- exit (!isalpha (x));
- }
- ],
- ac_cv_func_strerror_r_works=yes,
- ac_cv_func_strerror_r_works=no,
- ac_cv_func_strerror_r_works=no)
- fi
- ])
- if test $ac_cv_func_strerror_r_works = yes; then
- AC_DEFINE_UNQUOTED(HAVE_WORKING_STRERROR_R, 1,
- [Define to 1 if `strerror_r' returns a string.])
- fi
-fi
-])# AC_FUNC_STRERROR_R
-
-# Macro to add for using GNU gettext.
-# Ulrich Drepper <drepper@cygnus.com>, 1995.
-#
-# This file can be copied and used freely without restrictions. It can
-# be used in projects which are not available under the GNU General Public
-# License but which still want to provide support for the GNU gettext
-# functionality.
-# Please note that the actual code of GNU gettext is covered by the GNU
-# General Public License and is *not* in the public domain.
-
-# serial 10
-
-dnl Usage: AM_WITH_NLS([TOOLSYMBOL], [NEEDSYMBOL], [LIBDIR]).
-dnl If TOOLSYMBOL is specified and is 'use-libtool', then a libtool library
-dnl $(top_builddir)/intl/libintl.la will be created (shared and/or static,
-dnl depending on --{enable,disable}-{shared,static} and on the presence of
-dnl AM-DISABLE-SHARED). Otherwise, a static library
-dnl $(top_builddir)/intl/libintl.a will be created.
-dnl If NEEDSYMBOL is specified and is 'need-ngettext', then GNU gettext
-dnl implementations (in libc or libintl) without the ngettext() function
-dnl will be ignored.
-dnl LIBDIR is used to find the intl libraries. If empty,
-dnl the value `$(top_builddir)/intl/' is used.
-dnl
-dnl The result of the configuration is one of three cases:
-dnl 1) GNU gettext, as included in the intl subdirectory, will be compiled
-dnl and used.
-dnl Catalog format: GNU --> install in $(datadir)
-dnl Catalog extension: .mo after installation, .gmo in source tree
-dnl 2) GNU gettext has been found in the system's C library.
-dnl Catalog format: GNU --> install in $(datadir)
-dnl Catalog extension: .mo after installation, .gmo in source tree
-dnl 3) No internationalization, always use English msgid.
-dnl Catalog format: none
-dnl Catalog extension: none
-dnl The use of .gmo is historical (it was needed to avoid overwriting the
-dnl GNU format catalogs when building on a platform with an X/Open gettext),
-dnl but we keep it in order not to force irrelevant filename changes on the
-dnl maintainers.
-dnl
-AC_DEFUN([AM_WITH_NLS],
- [AC_MSG_CHECKING([whether NLS is requested])
- dnl Default is enabled NLS
- AC_ARG_ENABLE(nls,
- [ --disable-nls do not use Native Language Support],
- USE_NLS=$enableval, USE_NLS=yes)
- AC_MSG_RESULT($USE_NLS)
- AC_SUBST(USE_NLS)
-
- BUILD_INCLUDED_LIBINTL=no
- USE_INCLUDED_LIBINTL=no
- INTLLIBS=
-
- dnl If we use NLS figure out what method
- if test "$USE_NLS" = "yes"; then
- AC_DEFINE(ENABLE_NLS, 1,
- [Define to 1 if translation of program messages to the user's native language
- is requested.])
- AC_MSG_CHECKING([whether included gettext is requested])
- AC_ARG_WITH(included-gettext,
- [ --with-included-gettext use the GNU gettext library included here],
- nls_cv_force_use_gnu_gettext=$withval,
- nls_cv_force_use_gnu_gettext=no)
- AC_MSG_RESULT($nls_cv_force_use_gnu_gettext)
-
- nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
- if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
- dnl User does not insist on using GNU NLS library. Figure out what
- dnl to use. If GNU gettext is available we use this. Else we have
- dnl to fall back to GNU NLS library.
- CATOBJEXT=NONE
-
- dnl Add a version number to the cache macros.
- define(gt_cv_func_gnugettext_libc, [gt_cv_func_gnugettext]ifelse([$2], need-ngettext, 2, 1)[_libc])
- define(gt_cv_func_gnugettext_libintl, [gt_cv_func_gnugettext]ifelse([$2], need-ngettext, 2, 1)[_libintl])
-
- AC_CHECK_HEADER(libintl.h,
- [AC_CACHE_CHECK([for GNU gettext in libc], gt_cv_func_gnugettext_libc,
- [AC_TRY_LINK([#include <libintl.h>
-extern int _nl_msg_cat_cntr;],
- [bindtextdomain ("", "");
-return (int) gettext ("")]ifelse([$2], need-ngettext, [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr],
- gt_cv_func_gnugettext_libc=yes,
- gt_cv_func_gnugettext_libc=no)])
-
- if test "$gt_cv_func_gnugettext_libc" != "yes"; then
- AC_CACHE_CHECK([for GNU gettext in libintl],
- gt_cv_func_gnugettext_libintl,
- [gt_save_LIBS="$LIBS"
- LIBS="$LIBS -lintl $LIBICONV"
- AC_TRY_LINK([#include <libintl.h>
-extern int _nl_msg_cat_cntr;],
- [bindtextdomain ("", "");
-return (int) gettext ("")]ifelse([$2], need-ngettext, [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr],
- gt_cv_func_gnugettext_libintl=yes,
- gt_cv_func_gnugettext_libintl=no)
- LIBS="$gt_save_LIBS"])
- fi
-
- dnl If an already present or preinstalled GNU gettext() is found,
- dnl use it. But if this macro is used in GNU gettext, and GNU
- dnl gettext is already preinstalled in libintl, we update this
- dnl libintl. (Cf. the install rule in intl/Makefile.in.)
- if test "$gt_cv_func_gnugettext_libc" = "yes" \
- || { test "$gt_cv_func_gnugettext_libintl" = "yes" \
- && test "$PACKAGE" != gettext; }; then
- AC_DEFINE(HAVE_GETTEXT, 1,
- [Define if the GNU gettext() function is already present or preinstalled.])
-
- if test "$gt_cv_func_gnugettext_libintl" = "yes"; then
- dnl If iconv() is in a separate libiconv library, then anyone
- dnl linking with libintl{.a,.so} also needs to link with
- dnl libiconv.
- INTLLIBS="-lintl $LIBICONV"
- fi
-
- gt_save_LIBS="$LIBS"
- LIBS="$LIBS $INTLLIBS"
- AC_CHECK_FUNCS(dcgettext)
- LIBS="$gt_save_LIBS"
-
- dnl Search for GNU msgfmt in the PATH.
- AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
- [$ac_dir/$ac_word --statistics /dev/null >/dev/null 2>&1], :)
- AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
-
- dnl Search for GNU xgettext in the PATH.
- AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
- [$ac_dir/$ac_word --omit-header /dev/null >/dev/null 2>&1], :)
-
- CATOBJEXT=.gmo
- fi
- ])
-
- if test "$CATOBJEXT" = "NONE"; then
- dnl GNU gettext is not found in the C library.
- dnl Fall back on GNU gettext library.
- nls_cv_use_gnu_gettext=yes
- fi
- fi
-
- if test "$nls_cv_use_gnu_gettext" = "yes"; then
- dnl Mark actions used to generate GNU NLS library.
- INTLOBJS="\$(GETTOBJS)"
- AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
- [$ac_dir/$ac_word --statistics /dev/null >/dev/null 2>&1], :)
- AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
- AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
- [$ac_dir/$ac_word --omit-header /dev/null >/dev/null 2>&1], :)
- AC_SUBST(MSGFMT)
- BUILD_INCLUDED_LIBINTL=yes
- USE_INCLUDED_LIBINTL=yes
- CATOBJEXT=.gmo
- INTLLIBS="ifelse([$3],[],\$(top_builddir)/intl,[$3])/libintl.ifelse([$1], use-libtool, [l], [])a $LIBICONV"
- LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'`
- fi
-
- dnl This could go away some day; the PATH_PROG_WITH_TEST already does it.
- dnl Test whether we really found GNU msgfmt.
- if test "$GMSGFMT" != ":"; then
- dnl If it is no GNU msgfmt we define it as : so that the
- dnl Makefiles still can work.
- if $GMSGFMT --statistics /dev/null >/dev/null 2>&1; then
- : ;
- else
- AC_MSG_RESULT(
- [found msgfmt program is not GNU msgfmt; ignore it])
- GMSGFMT=":"
- fi
- fi
-
- dnl This could go away some day; the PATH_PROG_WITH_TEST already does it.
- dnl Test whether we really found GNU xgettext.
- if test "$XGETTEXT" != ":"; then
- dnl If it is no GNU xgettext we define it as : so that the
- dnl Makefiles still can work.
- if $XGETTEXT --omit-header /dev/null >/dev/null 2>&1; then
- : ;
- else
- AC_MSG_RESULT(
- [found xgettext program is not GNU xgettext; ignore it])
- XGETTEXT=":"
- fi
- fi
-
- dnl We need to process the po/ directory.
- POSUB=po
- fi
- AC_OUTPUT_COMMANDS(
- [for ac_file in $CONFIG_FILES; do
- # Support "outfile[:infile[:infile...]]"
- case "$ac_file" in
- *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
- esac
- # PO directories have a Makefile.in generated from Makefile.in.in.
- case "$ac_file" in */Makefile.in)
- # Adjust a relative srcdir.
- ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
- ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`"
- ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
- # In autoconf-2.13 it is called $ac_given_srcdir.
- # In autoconf-2.50 it is called $srcdir.
- test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
- case "$ac_given_srcdir" in
- .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
- /*) top_srcdir="$ac_given_srcdir" ;;
- *) top_srcdir="$ac_dots$ac_given_srcdir" ;;
- esac
- if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
- rm -f "$ac_dir/POTFILES"
- test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
- sed -e "/^#/d" -e "/^[ ]*\$/d" -e "s,.*, $top_srcdir/& \\\\," -e "\$s/\(.*\) \\\\/\1/" < "$ac_given_srcdir/$ac_dir/POTFILES.in" > "$ac_dir/POTFILES"
- test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
- sed -e "/POTFILES =/r $ac_dir/POTFILES" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
- fi
- ;;
- esac
- done])
-
-
- dnl If this is used in GNU gettext we have to set BUILD_INCLUDED_LIBINTL
- dnl to 'yes' because some of the testsuite requires it.
- if test "$PACKAGE" = gettext; then
- BUILD_INCLUDED_LIBINTL=yes
- fi
-
- dnl intl/plural.c is generated from intl/plural.y. It requires bison,
- dnl because plural.y uses bison specific features. It requires at least
- dnl bison-1.26 because earlier versions generate a plural.c that doesn't
- dnl compile.
- dnl bison is only needed for the maintainer (who touches plural.y). But in
- dnl order to avoid separate Makefiles or --enable-maintainer-mode, we put
- dnl the rule in general Makefile. Now, some people carelessly touch the
- dnl files or have a broken "make" program, hence the plural.c rule will
- dnl sometimes fire. To avoid an error, defines BISON to ":" if it is not
- dnl present or too old.
- AC_CHECK_PROGS([INTLBISON], [bison])
- if test -z "$INTLBISON"; then
- ac_verc_fail=yes
- else
- dnl Found it, now check the version.
- AC_MSG_CHECKING([version of bison])
-changequote(<<,>>)dnl
- ac_prog_version=`$INTLBISON --version 2>&1 | sed -n 's/^.*GNU Bison .* \([0-9]*\.[0-9.]*\).*$/\1/p'`
- case $ac_prog_version in
- '') ac_prog_version="v. ?.??, bad"; ac_verc_fail=yes;;
- 1.2[6-9]* | 1.[3-9][0-9]* | [2-9].*)
-changequote([,])dnl
- ac_prog_version="$ac_prog_version, ok"; ac_verc_fail=no;;
- *) ac_prog_version="$ac_prog_version, bad"; ac_verc_fail=yes;;
- esac
- AC_MSG_RESULT([$ac_prog_version])
- fi
- if test $ac_verc_fail = yes; then
- INTLBISON=:
- fi
-
- dnl These rules are solely for the distribution goal. While doing this
- dnl we only have to keep exactly one list of the available catalogs
- dnl in configure.in.
- for lang in $ALL_LINGUAS; do
- GMOFILES="$GMOFILES $lang.gmo"
- POFILES="$POFILES $lang.po"
- done
-
- dnl Make all variables we use known to autoconf.
- AC_SUBST(BUILD_INCLUDED_LIBINTL)
- AC_SUBST(USE_INCLUDED_LIBINTL)
- AC_SUBST(CATALOGS)
- AC_SUBST(CATOBJEXT)
- AC_SUBST(GMOFILES)
- AC_SUBST(INTLLIBS)
- AC_SUBST(INTLOBJS)
- AC_SUBST(POFILES)
- AC_SUBST(POSUB)
-
- dnl For backward compatibility. Some configure.ins may be using this.
- nls_cv_header_intl=
- nls_cv_header_libgt=
-
- dnl For backward compatibility. Some Makefiles may be using this.
- DATADIRNAME=share
- AC_SUBST(DATADIRNAME)
-
- dnl For backward compatibility. Some Makefiles may be using this.
- INSTOBJEXT=.mo
- AC_SUBST(INSTOBJEXT)
-
- dnl For backward compatibility. Some Makefiles may be using this.
- GENCAT=gencat
- AC_SUBST(GENCAT)
- ])
-
-dnl Usage: Just like AM_WITH_NLS, which see.
-AC_DEFUN([AM_GNU_GETTEXT],
- [AC_REQUIRE([AC_PROG_MAKE_SET])dnl
- AC_REQUIRE([AC_PROG_CC])dnl
- AC_REQUIRE([AC_CANONICAL_HOST])dnl
- AC_REQUIRE([AC_PROG_RANLIB])dnl
- AC_REQUIRE([AC_ISC_POSIX])dnl
- AC_REQUIRE([AC_HEADER_STDC])dnl
- AC_REQUIRE([AC_C_CONST])dnl
- AC_REQUIRE([AC_C_INLINE])dnl
- AC_REQUIRE([AC_TYPE_OFF_T])dnl
- AC_REQUIRE([AC_TYPE_SIZE_T])dnl
- AC_REQUIRE([AC_FUNC_ALLOCA])dnl
- AC_REQUIRE([AC_FUNC_MMAP])dnl
- AC_REQUIRE([jm_GLIBC21])dnl
-
- AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h stddef.h \
-stdlib.h string.h unistd.h sys/param.h])
- AC_CHECK_FUNCS([feof_unlocked fgets_unlocked getcwd getegid geteuid \
-getgid getuid mempcpy munmap putenv setenv setlocale stpcpy strchr strcasecmp \
-strdup strtoul tsearch __argz_count __argz_stringify __argz_next])
-
- AM_ICONV
- AM_LANGINFO_CODESET
- AM_LC_MESSAGES
- AM_WITH_NLS([$1],[$2],[$3])
-
- if test "x$CATOBJEXT" != "x"; then
- if test "x$ALL_LINGUAS" = "x"; then
- LINGUAS=
- else
- AC_MSG_CHECKING(for catalogs to be installed)
- NEW_LINGUAS=
- for presentlang in $ALL_LINGUAS; do
- useit=no
- for desiredlang in ${LINGUAS-$ALL_LINGUAS}; do
- # Use the presentlang catalog if desiredlang is
- # a. equal to presentlang, or
- # b. a variant of presentlang (because in this case,
- # presentlang can be used as a fallback for messages
- # which are not translated in the desiredlang catalog).
- case "$desiredlang" in
- "$presentlang"*) useit=yes;;
- esac
- done
- if test $useit = yes; then
- NEW_LINGUAS="$NEW_LINGUAS $presentlang"
- fi
- done
- LINGUAS=$NEW_LINGUAS
- AC_MSG_RESULT($LINGUAS)
- fi
-
- dnl Construct list of names of catalog files to be constructed.
- if test -n "$LINGUAS"; then
- for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
- fi
- fi
-
- dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly
- dnl find the mkinstalldirs script in another subdir but $(top_srcdir).
- dnl Try to locate is.
- MKINSTALLDIRS=
- if test -n "$ac_aux_dir"; then
- MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs"
- fi
- if test -z "$MKINSTALLDIRS"; then
- MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs"
- fi
- AC_SUBST(MKINSTALLDIRS)
-
- dnl Enable libtool support if the surrounding package wishes it.
- INTL_LIBTOOL_SUFFIX_PREFIX=ifelse([$1], use-libtool, [l], [])
- AC_SUBST(INTL_LIBTOOL_SUFFIX_PREFIX)
- ])
-
-# Search path for a program which passes the given test.
-# Ulrich Drepper <drepper@cygnus.com>, 1996.
-#
-# This file can be copied and used freely without restrictions. It can
-# be used in projects which are not available under the GNU General Public
-# License but which still want to provide support for the GNU gettext
-# functionality.
-# Please note that the actual code of GNU gettext is covered by the GNU
-# General Public License and is *not* in the public domain.
-
-# serial 2
-
-dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
-dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
-AC_DEFUN([AM_PATH_PROG_WITH_TEST],
-[# Extract the first word of "$2", so it can be a program name with args.
-set dummy $2; ac_word=[$]2
-AC_MSG_CHECKING([for $ac_word])
-AC_CACHE_VAL(ac_cv_path_$1,
-[case "[$]$1" in
- /*)
- ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
- ;;
- *)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in ifelse([$5], , $PATH, [$5]); do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- if [$3]; then
- ac_cv_path_$1="$ac_dir/$ac_word"
- break
- fi
- fi
- done
- IFS="$ac_save_ifs"
-dnl If no 4th arg is given, leave the cache variable unset,
-dnl so AC_PATH_PROGS will keep looking.
-ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
-])dnl
- ;;
-esac])dnl
-$1="$ac_cv_path_$1"
-if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then
- AC_MSG_RESULT([$]$1)
-else
- AC_MSG_RESULT(no)
-fi
-AC_SUBST($1)dnl
-])
-
-#serial 2
-
-# Test for the GNU C Library, version 2.1 or newer.
-# From Bruno Haible.
-
-AC_DEFUN([jm_GLIBC21],
- [
- AC_CACHE_CHECK(whether we are using the GNU C Library 2.1 or newer,
- ac_cv_gnu_library_2_1,
- [AC_EGREP_CPP([Lucky GNU user],
- [
-#include <features.h>
-#ifdef __GNU_LIBRARY__
- #if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1) || (__GLIBC__ > 2)
- Lucky GNU user
- #endif
-#endif
- ],
- ac_cv_gnu_library_2_1=yes,
- ac_cv_gnu_library_2_1=no)
- ]
- )
- AC_SUBST(GLIBC21)
- GLIBC21="$ac_cv_gnu_library_2_1"
- ]
-)
-
-#serial AM2
-
-dnl From Bruno Haible.
-
-AC_DEFUN([AM_ICONV],
-[
- dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and
- dnl those with the standalone portable GNU libiconv installed).
-
- AC_ARG_WITH([libiconv-prefix],
-[ --with-libiconv-prefix=DIR search for libiconv in DIR/include and DIR/lib], [
- for dir in `echo "$withval" | tr : ' '`; do
- if test -d $dir/include; then CPPFLAGS="$CPPFLAGS -I$dir/include"; fi
- if test -d $dir/lib; then LDFLAGS="$LDFLAGS -L$dir/lib"; fi
- done
- ])
-
- AC_CACHE_CHECK(for iconv, am_cv_func_iconv, [
- am_cv_func_iconv="no, consider installing GNU libiconv"
- am_cv_lib_iconv=no
- AC_TRY_LINK([#include <stdlib.h>
-#include <iconv.h>],
- [iconv_t cd = iconv_open("","");
- iconv(cd,NULL,NULL,NULL,NULL);
- iconv_close(cd);],
- am_cv_func_iconv=yes)
- if test "$am_cv_func_iconv" != yes; then
- am_save_LIBS="$LIBS"
- LIBS="$LIBS -liconv"
- AC_TRY_LINK([#include <stdlib.h>
-#include <iconv.h>],
- [iconv_t cd = iconv_open("","");
- iconv(cd,NULL,NULL,NULL,NULL);
- iconv_close(cd);],
- am_cv_lib_iconv=yes
- am_cv_func_iconv=yes)
- LIBS="$am_save_LIBS"
- fi
- ])
- if test "$am_cv_func_iconv" = yes; then
- AC_DEFINE(HAVE_ICONV, 1, [Define if you have the iconv() function.])
- AC_MSG_CHECKING([for iconv declaration])
- AC_CACHE_VAL(am_cv_proto_iconv, [
- AC_TRY_COMPILE([
-#include <stdlib.h>
-#include <iconv.h>
-extern
-#ifdef __cplusplus
-"C"
-#endif
-#if defined(__STDC__) || defined(__cplusplus)
-size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
-#else
-size_t iconv();
-#endif
-], [], am_cv_proto_iconv_arg1="", am_cv_proto_iconv_arg1="const")
- am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"])
- am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'`
- AC_MSG_RESULT([$]{ac_t:-
- }[$]am_cv_proto_iconv)
- AC_DEFINE_UNQUOTED(ICONV_CONST, $am_cv_proto_iconv_arg1,
- [Define as const if the declaration of iconv() needs const.])
- fi
- LIBICONV=
- if test "$am_cv_lib_iconv" = yes; then
- LIBICONV="-liconv"
- fi
- AC_SUBST(LIBICONV)
-])
-
-#serial AM1
-
-dnl From Bruno Haible.
-
-AC_DEFUN([AM_LANGINFO_CODESET],
-[
- AC_CACHE_CHECK([for nl_langinfo and CODESET], am_cv_langinfo_codeset,
- [AC_TRY_LINK([#include <langinfo.h>],
- [char* cs = nl_langinfo(CODESET);],
- am_cv_langinfo_codeset=yes,
- am_cv_langinfo_codeset=no)
- ])
- if test $am_cv_langinfo_codeset = yes; then
- AC_DEFINE(HAVE_LANGINFO_CODESET, 1,
- [Define if you have <langinfo.h> and nl_langinfo(CODESET).])
- fi
-])
-
-# Check whether LC_MESSAGES is available in <locale.h>.
-# Ulrich Drepper <drepper@cygnus.com>, 1995.
-#
-# This file can be copied and used freely without restrictions. It can
-# be used in projects which are not available under the GNU General Public
-# License but which still want to provide support for the GNU gettext
-# functionality.
-# Please note that the actual code of GNU gettext is covered by the GNU
-# General Public License and is *not* in the public domain.
-
-# serial 2
-
-AC_DEFUN([AM_LC_MESSAGES],
- [if test $ac_cv_header_locale_h = yes; then
- AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
- [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
- am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
- if test $am_cv_val_LC_MESSAGES = yes; then
- AC_DEFINE(HAVE_LC_MESSAGES, 1,
- [Define if your <locale.h> file defines LC_MESSAGES.])
- fi
- fi])
-
projects / bison.git / commitdiff
