@value{UPDATED}), the @acronym{GNU} parser generator.
Copyright @copyright{} 1988, 1989, 1990, 1991, 1992, 1993, 1995, 1998,
-1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
+1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software
+Foundation, Inc.
@quotation
Permission is granted to copy, distribute and/or modify this document
(a) below. A copy of the license is included in the section entitled
``@acronym{GNU} Free Documentation License.''
-(a) The @acronym{FSF}'s Back-Cover Text is: ``You have freedom to copy
-and modify this @acronym{GNU} Manual, like @acronym{GNU} software.
-Copies published by the Free Software Foundation raise funds for
-@acronym{GNU} development.''
+(a) The FSF's Back-Cover Text is: ``You have the freedom to copy and
+modify this @acronym{GNU} manual. Buying copies from the @acronym{FSF}
+supports it in developing @acronym{GNU} and promoting software
+freedom.''
@end quotation
@end copying
* Expect Decl:: Suppressing warnings about parsing conflicts.
* Start Decl:: Specifying the start symbol.
* Pure Decl:: Requesting a reentrant parser.
+* Push Decl:: Requesting a push parser.
* Decl Summary:: Table of all Bison declarations.
Parser C-Language Interface
Copying This Manual
-* GNU Free Documentation License:: License for copying this manual.
+* Copying This Manual:: License for copying this manual.
@end detailmenu
@end menu
exception@dots{}''. The text spells out the exact terms of the
exception.
-@include gpl.texi
+@node Copying
+@unnumbered GNU GENERAL PUBLIC LICENSE
+@include gpl-3.0.texi
@node Concepts
@chapter The Concepts of Bison
You could even place each of the above directive groups in the rules section of
the grammar file next to the set of rules that uses the associated semantic
type.
+(In the rules section, you must terminate each of those directives with a
+semicolon.)
And you don't have to worry that some directive (like a @code{%union}) in the
definitions section is going to adversely affect their functionality in some
counter-intuitive manner just because it comes first.
* Expect Decl:: Suppressing warnings about parsing conflicts.
* Start Decl:: Specifying the start symbol.
* Pure Decl:: Requesting a reentrant parser.
+* Push Decl:: Requesting a push parser.
* Decl Summary:: Table of all Bison declarations.
@end menu
Precedence}.
You can explicitly specify the numeric code for a token type by appending
-a decimal or hexadecimal integer value in the field immediately
+a nonnegative decimal or hexadecimal integer value in the field immediately
following the token name:
@example
interchangeably in further declarations or the grammar rules. The
@code{yylex} function can use the token name or the literal string to
obtain the token type code number (@pxref{Calling Convention}).
+Syntax error messages passed to @code{yyerror} from the parser will reference
+the literal string instead of the token name.
+
+The token numbered as 0 corresponds to end of file; the following line
+allows for nicer error messages referring to ``end of file'' instead
+of ``$end'':
+
+@example
+%token END 0 "end of file"
+@end example
@node Precedence Decl
@subsection Operator Precedence
@xref{Precedence, ,Operator Precedence}, for general information on
operator precedence.
-The syntax of a precedence declaration is the same as that of
+The syntax of a precedence declaration is nearly the same as that of
@code{%token}: either
@example
the one declared later has the higher precedence and is grouped first.
@end itemize
+For backward compatibility, there is a confusing difference between the
+argument lists of @code{%token} and precedence declarations.
+Only a @code{%token} can associate a literal string with a token type name.
+A precedence declaration always interprets a literal string as a reference to a
+separate token.
+For example:
+
+@example
+%left OR "<=" // Does not declare an alias.
+%left OR 134 "<=" 135 // Declares 134 for OR and 135 for "<=".
+@end example
+
@node Union Decl
@subsection The Collection of Value Types
@cindex declaring value types
@code{YYABORT} or @code{YYACCEPT}, or failed error recovery, or memory
exhaustion.
-Right-hand size symbols of a rule that explicitly triggers a syntax
+Right-hand side symbols of a rule that explicitly triggers a syntax
error via @code{YYERROR} are not discarded automatically. As a rule
of thumb, destructors are invoked only when user actions cannot manage
the memory.
@subsection A Pure (Reentrant) Parser
@cindex reentrant parser
@cindex pure parser
-@findex %pure-parser
+@findex %define api.pure
A @dfn{reentrant} program is one which does not alter in the course of
execution; in other words, it consists entirely of @dfn{pure} (read-only)
including @code{yylval} and @code{yylloc}.)
Alternatively, you can generate a pure, reentrant parser. The Bison
-declaration @code{%pure-parser} says that you want the parser to be
+declaration @code{%define api.pure} says that you want the parser to be
reentrant. It looks like this:
@example
-%pure-parser
+%define api.pure
@end example
The result is that the communication variables @code{yylval} and
@code{yylloc} become local variables in @code{yyparse}, and a different
calling convention is used for the lexical analyzer function
@code{yylex}. @xref{Pure Calling, ,Calling Conventions for Pure
-Parsers}, for the details of this. The variable @code{yynerrs} also
-becomes local in @code{yyparse} (@pxref{Error Reporting, ,The Error
+Parsers}, for the details of this. The variable @code{yynerrs}
+becomes local in @code{yyparse} in pull mode but it becomes a member
+of yypstate in push mode. (@pxref{Error Reporting, ,The Error
Reporting Function @code{yyerror}}). The convention for calling
@code{yyparse} itself is unchanged.
You can generate either a pure parser or a nonreentrant parser from any
valid grammar.
+@node Push Decl
+@subsection A Push Parser
+@cindex push parser
+@cindex push parser
+@findex %define api.push_pull
+
+(The current push parsing interface is experimental and may evolve.
+More user feedback will help to stabilize it.)
+
+A pull parser is called once and it takes control until all its input
+is completely parsed. A push parser, on the other hand, is called
+each time a new token is made available.
+
+A push parser is typically useful when the parser is part of a
+main event loop in the client's application. This is typically
+a requirement of a GUI, when the main event loop needs to be triggered
+within a certain time period.
+
+Normally, Bison generates a pull parser.
+The following Bison declaration says that you want the parser to be a push
+parser (@pxref{Decl Summary,,%define api.push_pull}):
+
+@example
+%define api.push_pull "push"
+@end example
+
+In almost all cases, you want to ensure that your push parser is also
+a pure parser (@pxref{Pure Decl, ,A Pure (Reentrant) Parser}). The only
+time you should create an impure push parser is to have backwards
+compatibility with the impure Yacc pull mode interface. Unless you know
+what you are doing, your declarations should look like this:
+
+@example
+%define api.pure
+%define api.push_pull "push"
+@end example
+
+There is a major notable functional difference between the pure push parser
+and the impure push parser. It is acceptable for a pure push parser to have
+many parser instances, of the same type of parser, in memory at the same time.
+An impure push parser should only use one parser at a time.
+
+When a push parser is selected, Bison will generate some new symbols in
+the generated parser. @code{yypstate} is a structure that the generated
+parser uses to store the parser's state. @code{yypstate_new} is the
+function that will create a new parser instance. @code{yypstate_delete}
+will free the resources associated with the corresponding parser instance.
+Finally, @code{yypush_parse} is the function that should be called whenever a
+token is available to provide the parser. A trivial example
+of using a pure push parser would look like this:
+
+@example
+int status;
+yypstate *ps = yypstate_new ();
+do @{
+ status = yypush_parse (ps, yylex (), NULL);
+@} while (status == YYPUSH_MORE);
+yypstate_delete (ps);
+@end example
+
+If the user decided to use an impure push parser, a few things about
+the generated parser will change. The @code{yychar} variable becomes
+a global variable instead of a variable in the @code{yypush_parse} function.
+For this reason, the signature of the @code{yypush_parse} function is
+changed to remove the token as a parameter. A nonreentrant push parser
+example would thus look like this:
+
+@example
+extern int yychar;
+int status;
+yypstate *ps = yypstate_new ();
+do @{
+ yychar = yylex ();
+ status = yypush_parse (ps);
+@} while (status == YYPUSH_MORE);
+yypstate_delete (ps);
+@end example
+
+That's it. Notice the next token is put into the global variable @code{yychar}
+for use by the next invocation of the @code{yypush_parse} function.
+
+Bison also supports both the push parser interface along with the pull parser
+interface in the same generated parser. In order to get this functionality,
+you should replace the @code{%define api.push_pull "push"} declaration with the
+@code{%define api.push_pull "both"} declaration. Doing this will create all of
+the symbols mentioned earlier along with the two extra symbols, @code{yyparse}
+and @code{yypull_parse}. @code{yyparse} can be used exactly as it normally
+would be used. However, the user should note that it is implemented in the
+generated parser by calling @code{yypull_parse}.
+This makes the @code{yyparse} function that is generated with the
+@code{%define api.push_pull "both"} declaration slower than the normal
+@code{yyparse} function. If the user
+calls the @code{yypull_parse} function it will parse the rest of the input
+stream. It is possible to @code{yypush_parse} tokens to select a subgrammar
+and then @code{yypull_parse} the rest of the input stream. If you would like
+to switch back and forth between between parsing styles, you would have to
+write your own @code{yypull_parse} function that knows when to quit looking
+for input. An example of using the @code{yypull_parse} function would look
+like this:
+
+@example
+yypstate *ps = yypstate_new ();
+yypull_parse (ps); /* Will call the lexer */
+yypstate_delete (ps);
+@end example
+
+Adding the @code{%define api.pure} declaration does exactly the same thing to
+the generated parser with @code{%define api.push_pull "both"} as it did for
+@code{%define api.push_pull "push"}.
+
@node Decl Summary
@subsection Bison Declaration Summary
@cindex Bison declaration summary
Not all values of @var{qualifier} are available for all target languages:
@itemize @bullet
-@findex %code requires
@item requires
+@findex %code requires
@itemize @bullet
@item Language(s): C, C++
@deffn {Directive} %define @var{variable}
@deffnx {Directive} %define @var{variable} "@var{value}"
-Define a variable to adjust Bison's behavior. The possible choices for
-@var{variable}, as well as their meanings, depend on the selected target
-language and/or the parser skeleton (@pxref{Decl Summary,,%language}).
+Define a variable to adjust Bison's behavior.
+The possible choices for @var{variable}, as well as their meanings, depend on
+the selected target language and/or the parser skeleton (@pxref{Decl
+Summary,,%language}).
+
+Bison will warn if a @var{variable} is defined multiple times.
+
+Omitting @code{"@var{value}"} is always equivalent to specifying it as
+@code{""}.
+
+Some @var{variable}s may be used as Booleans.
+In this case, Bison will complain if the variable definition does not meet one
+of the following four conditions:
+
+@enumerate
+@item @code{"@var{value}"} is @code{"true"}
+
+@item @code{"@var{value}"} is omitted (or is @code{""}).
+This is equivalent to @code{"true"}.
+
+@item @code{"@var{value}"} is @code{"false"}.
+
+@item @var{variable} is never defined.
+In this case, Bison selects a default value, which may depend on the selected
+target language and/or parser skeleton.
+@end enumerate
+
+Some of the accepted @var{variable}s are:
+
+@itemize @bullet
+@item api.pure
+@findex %define api.pure
+
+@itemize @bullet
+@item Language(s): C
+
+@item Purpose: Request a pure (reentrant) parser program.
+@xref{Pure Decl, ,A Pure (Reentrant) Parser}.
+
+@item Accepted Values: Boolean
+
+@item Default Value: @code{"false"}
+@end itemize
+
+@item api.push_pull
+@findex %define api.push_pull
+
+@itemize @bullet
+@item Language(s): C (LALR(1) only)
+
+@item Purpose: Requests a pull parser, a push parser, or both.
+@xref{Push Decl, ,A Push Parser}.
+(The current push parsing interface is experimental and may evolve.
+More user feedback will help to stabilize it.)
+
+@item Accepted Values: @code{"pull"}, @code{"push"}, @code{"both"}
+
+@item Default Value: @code{"pull"}
+@end itemize
+
+@item lr.keep_unreachable_states
+@findex %define lr.keep_unreachable_states
+
+@itemize @bullet
+@item Language(s): all
+
+@item Purpose: Requests that Bison allow unreachable parser states to remain in
+the parser tables.
+Bison considers a state to be unreachable if there exists no sequence of
+transitions from the start state to that state.
+A state can become unreachable during conflict resolution if Bison disables a
+shift action leading to it from a predecessor state.
+Keeping unreachable states is sometimes useful for analysis purposes, but they
+are useless in the generated parser.
+
+@item Accepted Values: Boolean
+
+@item Default Value: @code{"false"}
+
+@item Caveats:
+
+@itemize @bullet
+
+@item Unreachable states may contain conflicts and may use rules not used in
+any other state.
+Thus, keeping unreachable states may induce warnings that are irrelevant to
+your parser's behavior, and it may eliminate warnings that are relevant.
+Of course, the change in warnings may actually be relevant to a parser table
+analysis that wants to keep unreachable states, so this behavior will likely
+remain in future Bison releases.
+
+@item While Bison is able to remove unreachable states, it is not guaranteed to
+remove other kinds of useless states.
+Specifically, when Bison disables reduce actions during conflict resolution,
+some goto actions may become useless, and thus some additional states may
+become useless.
+If Bison were to compute which goto actions were useless and then disable those
+actions, it could identify such states as unreachable and then remove those
+states.
+However, Bison does not compute which goto actions are useless.
+@end itemize
+@end itemize
+
+@item namespace
+@findex %define namespace
+
+@itemize
+@item Languages(s): C++
+
+@item Purpose: Specifies the namespace for the parser class.
+For example, if you specify:
+
+@smallexample
+%define namespace "foo::bar"
+@end smallexample
+
+Bison uses @code{foo::bar} verbatim in references such as:
+
+@smallexample
+foo::bar::parser::semantic_type
+@end smallexample
+
+However, to open a namespace, Bison removes any leading @code{::} and then
+splits on any remaining occurrences:
+
+@smallexample
+namespace foo @{ namespace bar @{
+ class position;
+ class location;
+@} @}
+@end smallexample
+
+@item Accepted Values: Any absolute or relative C++ namespace reference without
+a trailing @code{"::"}.
+For example, @code{"foo"} or @code{"::foo::bar"}.
+
+@item Default Value: The value specified by @code{%name-prefix}, which defaults
+to @code{yy}.
+This usage of @code{%name-prefix} is for backward compatibility and can be
+confusing since @code{%name-prefix} also specifies the textual prefix for the
+lexical analyzer function.
+Thus, if you specify @code{%name-prefix}, it is best to also specify
+@code{%define namespace} so that @code{%name-prefix} @emph{only} affects the
+lexical analyzer function.
+For example, if you specify:
+
+@smallexample
+%define namespace "foo"
+%name-prefix "bar::"
+@end smallexample
+
+The parser namespace is @code{foo} and @code{yylex} is referenced as
+@code{bar::lex}.
+@end itemize
+@end itemize
-Some @var{variable}s may be used as boolean values: in this case, the
-skeleton will conventionally treat a @var{value} of @samp{false} as the
-boolean variable being false; a @var{value} of @samp{true}, or @var{value}
-being omitted altogether, will conversely define the variable as true.
@end deffn
@deffn {Directive} %defines
@deffn {Directive} %language "@var{language}"
Specify the programming language for the generated parser. Currently
-supported languages include C and C++.
+supported languages include C, C++, and Java.
@var{language} is case-insensitive.
@end deffn
in C parsers
is @code{yyparse}, @code{yylex}, @code{yyerror}, @code{yynerrs},
@code{yylval}, @code{yychar}, @code{yydebug}, and
-(if locations are used) @code{yylloc}. For example, if you use
-@samp{%name-prefix "c_"}, the names become @code{c_parse}, @code{c_lex},
-and so on. In C++ parsers, it is only the surrounding namespace which is
-named @var{prefix} instead of @samp{yy}.
+(if locations are used) @code{yylloc}. If you use a push parser,
+@code{yypush_parse}, @code{yypull_parse}, @code{yypstate},
+@code{yypstate_new} and @code{yypstate_delete} will
+also be renamed. For example, if you use @samp{%name-prefix "c_"}, the
+names become @code{c_parse}, @code{c_lex}, and so on.
+For C++ parsers, see the @code{%define namespace} documentation in this
+section.
@xref{Multiple Parsers, ,Multiple Parsers in the Same Program}.
@end deffn
@end deffn
@end ifset
-@deffn {Directive} %no-parser
-Do not include any C code in the parser file; generate tables only. The
-parser file contains just @code{#define} directives and static variable
-declarations.
-
-This option also tells Bison to write the C code for the grammar actions
-into a file named @file{@var{file}.act}, in the form of a
-brace-surrounded body fit for a @code{switch} statement.
-@end deffn
-
@deffn {Directive} %no-lines
Don't generate any @code{#line} preprocessor commands in the parser
file. Ordinarily Bison writes these commands in the parser file so that
@end deffn
@deffn {Directive} %pure-parser
-Request a pure (reentrant) parser program (@pxref{Pure Decl, ,A Pure
-(Reentrant) Parser}).
+Deprecated version of @code{%define api.pure} (@pxref{Decl Summary, ,%define}),
+for which Bison is more careful to warn about unreasonable usage.
@end deffn
@deffn {Directive} %require "@var{version}"
The precise list of symbols renamed is @code{yyparse}, @code{yylex},
@code{yyerror}, @code{yynerrs}, @code{yylval}, @code{yylloc},
-@code{yychar} and @code{yydebug}. For example, if you use @samp{-p c},
-the names become @code{cparse}, @code{clex}, and so on.
+@code{yychar} and @code{yydebug}. If you use a push parser,
+@code{yypush_parse}, @code{yypull_parse}, @code{yypstate},
+@code{yypstate_new} and @code{yypstate_delete} will also be renamed.
+For example, if you use @samp{-p c}, the names become @code{cparse},
+@code{clex}, and so on.
@strong{All the other variables and macros associated with Bison are not
renamed.} These others are not global; there is no conflict if the same
@menu
* Parser Function:: How to call @code{yyparse} and what it returns.
+* Push Parser Function:: How to call @code{yypush_parse} and what it returns.
+* Pull Parser Function:: How to call @code{yypull_parse} and what it returns.
+* Parser Create Function:: How to call @code{yypstate_new} and what it
+ returns.
+* Parser Delete Function:: How to call @code{yypstate_delete} and what it
+ returns.
* Lexical:: You must supply a function @code{yylex}
which reads tokens.
* Error Reporting:: You must supply a function @code{yyerror}.
exp: @dots{} @{ @dots{}; *randomness += 1; @dots{} @}
@end example
+@node Push Parser Function
+@section The Push Parser Function @code{yypush_parse}
+@findex yypush_parse
+
+(The current push parsing interface is experimental and may evolve.
+More user feedback will help to stabilize it.)
+
+You call the function @code{yypush_parse} to parse a single token. This
+function is available if either the @code{%define api.push_pull "push"} or
+@code{%define api.push_pull "both"} declaration is used.
+@xref{Push Decl, ,A Push Parser}.
+
+@deftypefun int yypush_parse (yypstate *yyps)
+The value returned by @code{yypush_parse} is the same as for yyparse with the
+following exception. @code{yypush_parse} will return YYPUSH_MORE if more input
+is required to finish parsing the grammar.
+@end deftypefun
+
+@node Pull Parser Function
+@section The Pull Parser Function @code{yypull_parse}
+@findex yypull_parse
+
+(The current push parsing interface is experimental and may evolve.
+More user feedback will help to stabilize it.)
+
+You call the function @code{yypull_parse} to parse the rest of the input
+stream. This function is available if the @code{%define api.push_pull "both"}
+declaration is used.
+@xref{Push Decl, ,A Push Parser}.
+
+@deftypefun int yypull_parse (yypstate *yyps)
+The value returned by @code{yypull_parse} is the same as for @code{yyparse}.
+@end deftypefun
+
+@node Parser Create Function
+@section The Parser Create Function @code{yystate_new}
+@findex yypstate_new
+
+(The current push parsing interface is experimental and may evolve.
+More user feedback will help to stabilize it.)
+
+You call the function @code{yypstate_new} to create a new parser instance.
+This function is available if either the @code{%define api.push_pull "push"} or
+@code{%define api.push_pull "both"} declaration is used.
+@xref{Push Decl, ,A Push Parser}.
+
+@deftypefun yypstate *yypstate_new (void)
+The fuction will return a valid parser instance if there was memory available
+or 0 if no memory was available.
+In impure mode, it will also return 0 if a parser instance is currently
+allocated.
+@end deftypefun
+
+@node Parser Delete Function
+@section The Parser Delete Function @code{yystate_delete}
+@findex yypstate_delete
+
+(The current push parsing interface is experimental and may evolve.
+More user feedback will help to stabilize it.)
+
+You call the function @code{yypstate_delete} to delete a parser instance.
+function is available if either the @code{%define api.push_pull "push"} or
+@code{%define api.push_pull "both"} declaration is used.
+@xref{Push Decl, ,A Push Parser}.
+
+@deftypefun void yypstate_delete (yypstate *yyps)
+This function will reclaim the memory associated with a parser instance.
+After this call, you should no longer attempt to use the parser instance.
+@end deftypefun
@node Lexical
@section The Lexical Analyzer Function @code{yylex}
@node Pure Calling
@subsection Calling Conventions for Pure Parsers
-When you use the Bison declaration @code{%pure-parser} to request a
+When you use the Bison declaration @code{%define api.pure} to request a
pure, reentrant parser, the global communication variables @code{yylval}
and @code{yylloc} cannot be used. (@xref{Pure Decl, ,A Pure (Reentrant)
Parser}.) In such parsers the two global variables are replaced by
int yyparse (int *nastiness, int *randomness);
@end example
-If @code{%pure-parser} is added:
+If @code{%define api.pure} is added:
@example
int yylex (YYSTYPE *lvalp, int *nastiness);
@end example
@noindent
-and finally, if both @code{%pure-parser} and @code{%locations} are used:
+and finally, if both @code{%define api.pure} and @code{%locations} are used:
@example
int yylex (YYSTYPE *lvalp, YYLTYPE *llocp, int *nastiness);
an access to the current location.
This is indeed the case for the @acronym{GLR}
parsers, but not for the Yacc parser, for historical reasons. I.e., if
-@samp{%locations %pure-parser} is passed then the prototypes for
+@samp{%locations %define api.pure} is passed then the prototypes for
@code{yyerror} are:
@example
Finally, @acronym{GLR} and Yacc parsers share the same @code{yyerror} calling
convention for absolutely pure parsers, i.e., when the calling
convention of @code{yylex} @emph{and} the calling convention of
-@code{%pure-parser} are pure. I.e.:
+@code{%define api.pure} are pure.
+I.e.:
@example
/* Location tracking. */
%locations
/* Pure yylex. */
-%pure-parser
+%define api.pure
%lex-param @{int *nastiness@}
/* Pure yyparse. */
%parse-param @{int *nastiness@}
@command{bison} reports:
@example
-calc.y: warning: 1 useless nonterminal and 1 useless rule
-calc.y:11.1-7: warning: useless nonterminal: useless
-calc.y:11.10-12: warning: useless rule: useless: STR
+calc.y: warning: 1 nonterminal and 1 rule useless in grammar
+calc.y:11.1-7: warning: nonterminal useless in grammar: useless
+calc.y:11.10-12: warning: rule useless in grammar: useless: STR
calc.y: conflicts: 7 shift/reduce
@end example
The next section reports useless tokens, nonterminal and rules. Useless
nonterminals and rules are removed in order to produce a smaller parser,
but useless tokens are preserved, since they might be used by the
-scanner (note the difference between ``useless'' and ``not used''
+scanner (note the difference between ``useless'' and ``unused''
below):
@example
-Useless nonterminals:
+Nonterminals useless in grammar:
useless
-Terminals which are not used:
+Terminals unused in grammar:
STR
-Useless rules:
+Rules useless in grammar:
#6 useless: STR;
@end example
@example
state 8
- exp -> exp . '+' exp [$, '+', '-', '/'] (rule 1)
+ exp -> exp . '+' exp (rule 1)
exp -> exp '+' exp . [$, '+', '-', '/'] (rule 1)
exp -> exp . '-' exp (rule 2)
exp -> exp . '*' exp (rule 3)
@item --print-localedir
Print the name of the directory containing locale-dependent data.
+@item --print-datadir
+Print the name of the directory containing skeletons and XSLT.
+
@item -y
@itemx --yacc
Act more like the traditional Yacc command. This can cause
like @samp{%glr-parser}, Bison might not be Yacc-compatible even if
this option is specified.
+@item -W
+@itemx --warnings
+Output warnings falling in @var{category}. @var{category} can be one
+of:
+@table @code
+@item midrule-values
+Warn about mid-rule values that are set but not used within any of the actions
+of the parent rule.
+For example, warn about unused @code{$2} in:
+
+@example
+exp: '1' @{ $$ = 1; @} '+' exp @{ $$ = $1 + $4; @};
+@end example
+
+Also warn about mid-rule values that are used but not set.
+For example, warn about unset @code{$$} in the mid-rule action in:
+
+@example
+ exp: '1' @{ $1 = 1; @} '+' exp @{ $$ = $2 + $4; @};
+@end example
+
+These warnings are not enabled by default since they sometimes prove to
+be false alarms in existing grammars employing the Yacc constructs
+@code{$0} or @code{$-@var{n}} (where @var{n} is some positive integer).
+
+
+@item yacc
+Incompatibilities with @acronym{POSIX} Yacc.
+
+@item all
+All the warnings.
+@item none
+Turn off all the warnings.
+@item error
+Treat warnings as errors.
+@end table
+
+A category can be turned off by prefixing its name with @samp{no-}. For
+instance, @option{-Wno-syntax} will hide the warnings about unused
+variables.
@end table
@noindent
@itemx --language=@var{language}
Specify the programming language for the generated parser, as if
@code{%language} was specified (@pxref{Decl Summary, , Bison Declaration
-Summary}). Currently supported languages include C and C++.
+Summary}). Currently supported languages include C, C++, and Java.
@var{language} is case-insensitive.
@item --locations
grammar file. This option causes them to associate errors with the
parser file, treating it as an independent source file in its own right.
-@item -n
-@itemx --no-parser
-Pretend that @code{%no-parser} was specified. @xref{Decl Summary}.
-
@item -S @var{file}
@itemx --skeleton=@var{file}
Specify the skeleton to use, similar to @code{%skeleton}
Adjust the output:
@table @option
-@item -d
-@itemx --defines
+@item --defines[=@var{file}]
Pretend that @code{%defines} was specified, i.e., write an extra output
file containing macro definitions for the token type names defined in
the grammar, as well as a few other declarations. @xref{Decl Summary}.
-@item --defines=@var{defines-file}
-Same as above, but save in the file @var{defines-file}.
+@item -d
+This is the same as @code{--defines} except @code{-d} does not accept a
+@var{file} argument since POSIX Yacc requires that @code{-d} can be bundled
+with other short options.
@item -b @var{file-prefix}
@itemx --file-prefix=@var{prefix}
the full set of items for each state, instead of its core only.
@end table
+@item --report-file=@var{file}
+Specify the @var{file} for the verbose description.
+
@item -v
@itemx --verbose
Pretend that @code{%verbose} was specified, i.e., write an extra output
The other output files' names are constructed from @var{file} as
described under the @samp{-v} and @samp{-d} options.
-@item -g
+@item -g[@var{file}]
+@itemx --graph[=@var{file}]
Output a graphical representation of the @acronym{LALR}(1) grammar
automaton computed by Bison, in @uref{http://www.graphviz.org/, Graphviz}
@uref{http://www.graphviz.org/doc/info/lang.html, @acronym{DOT}} format.
-If the grammar file is @file{foo.y}, the output file will
-be @file{foo.dot}.
-
-@item --graph=@var{graph-file}
-The behavior of @var{--graph} is the same than @samp{-g}. The only
-difference is that it has an optional argument which is the name of
-the output graph file.
+@code{@var{file}} is optional.
+If omitted and the grammar file is @file{foo.y}, the output file will be
+@file{foo.dot}.
+
+@item -x[@var{file}]
+@itemx --xml[=@var{file}]
+Output an XML report of the @acronym{LALR}(1) automaton computed by Bison.
+@code{@var{file}} is optional.
+If omitted and the grammar file is @file{foo.y}, the output file will be
+@file{foo.xml}.
+(The current XML schema is experimental and may evolve.
+More user feedback will help to stabilize it.)
@end table
@node Option Cross Key
@multitable {@option{--defines=@var{defines-file}}} {@option{-b @var{file-prefix}XXX}}
@headitem Long Option @tab Short Option
-@item @option{--debug} @tab @option{-t}
-@item @option{--defines=@var{defines-file}} @tab @option{-d}
-@item @option{--file-prefix=@var{prefix}} @tab @option{-b @var{file-prefix}}
-@item @option{--graph=@var{graph-file}} @tab @option{-d}
-@item @option{--help} @tab @option{-h}
-@item @option{--name-prefix=@var{prefix}} @tab @option{-p @var{name-prefix}}
-@item @option{--no-lines} @tab @option{-l}
-@item @option{--no-parser} @tab @option{-n}
-@item @option{--output=@var{outfile}} @tab @option{-o @var{outfile}}
-@item @option{--print-localedir} @tab
-@item @option{--token-table} @tab @option{-k}
-@item @option{--verbose} @tab @option{-v}
-@item @option{--version} @tab @option{-V}
-@item @option{--yacc} @tab @option{-y}
+@include cross-options.texi
@end multitable
@node Yacc Library
@option{--language=c++}.
@xref{Decl Summary}.
-When run, @command{bison} will create several
-entities in the @samp{yy} namespace. Use the @samp{%name-prefix}
-directive to change the namespace name, see @ref{Decl Summary}. The
-various classes are generated in the following files:
+When run, @command{bison} will create several entities in the @samp{yy}
+namespace.
+@findex %define namespace
+Use the @samp{%define namespace} directive to change the namespace name, see
+@ref{Decl Summary}.
+The various classes are generated in the following files:
@table @file
@item position.hh
The parser invokes the scanner by calling @code{yylex}. Contrary to C
parsers, C++ parsers are always pure: there is no point in using the
-@code{%pure-parser} directive. Therefore the interface is as follows.
+@code{%define api.pure} directive. Therefore the interface is as follows.
@deftypemethod {parser} {int} yylex (semantic_value_type& @var{yylval}, location_type& @var{yylloc}, @var{type1} @var{arg1}, ...)
Return the next token. Its type is the return value, its semantic
@c - %language "Java"
@c - initial action
+(The current Java interface is experimental and may evolve.
+More user feedback will help to stabilize it.)
+
The Java parser skeletons are selected using a language directive,
@samp{%language "Java"}, or the synonymous command-line option
@option{--language=java}.
The parser class defines an inner class, @code{Location}, that is used
for location tracking. If the parser is pure, it also defines an
-inner interface, @code{Lexer}; see~@ref{Java Scanner Interface} for the
+inner interface, @code{Lexer}; see @ref{Java Scanner Interface} for the
meaning of pure parsers when the Java language is chosen. Other than
-these inner class/interface, and the members described in~@ref{Java
+these inner class/interface, and the members described in @ref{Java
Parser Interface}, all the other members and fields are preceded
with a @code{yy} prefix to avoid clashes with user code.
of the @file{.java} file should match the name of the class in this
case.
-All these files are documented using Javadoc.
+Similarly, a declaration @samp{%define "abstract"} will make your
+class abstract.
+
+You can create documentation for generated parsers using Javadoc.
@node Java Semantic Values
@subsection Java Semantic Values
For example, after the following declaration:
@example
-%define "union_name" "ASTNode"
+%define "stype" "ASTNode"
@end example
@noindent
@code{false} otherwise.
@end deftypemethod
-@deftypemethod {YYParser} {boolean} yyrecovering ()
+@deftypemethod {YYParser} {boolean} recovering ()
During the syntactic analysis, return @code{true} if recovering
from a syntax error. @xref{Error Recovery}.
@end deftypemethod
@node Java Scanner Interface
@subsection Java Scanner Interface
-@c - prefix for yylex.
-@c - Pure interface to yylex
+@c - %code lexer
@c - %lex-param
+@c - Lexer interface
-There are two possible ways to interface a Bison-generated Java parser
-with a scanner.
-
-@cindex pure parser, in Java
Contrary to C parsers, Java parsers do not use global variables; the
state of the parser is always local to an instance of the parser class.
-Therefore, all Java parsers are ``pure'' in the C sense. The
-@code{%pure-parser} directive can still be used in Java, and it
-will control whether the lexer resides in a separate class than the
-Bison-generated parser (therefore, Bison generates a class that is
-``purely'' a parser), or in the same class. The interface to the scanner
-is similar, though the two cases present a slightly different naming.
-
-For the @code{%pure-parser} case, the scanner implements an interface
-called @code{Lexer} and defined within the parser class (e.g.,
-@code{YYParser.Lexer}. The constructor of the parser object accepts
-an object implementing the interface. The interface specifies
-the following methods.
-
-@deftypemethod {Lexer} {void} error (Location @var{l}, String @var{m})
+Therefore, all Java parsers are ``pure'', and the @code{%pure-parser}
+directive does not do anything when used in Java.
+@c FIXME: But a bit farther it is stated that
+@c If @code{%pure-parser} is not specified, the lexer interface
+@c resides in the same class (@code{YYParser}) as the Bison-generated
+@c parser. The fields and methods that are provided to
+@c this end are as follows.
+
+The scanner always resides in a separate class than the parser.
+Still, there are two possible ways to interface a Bison-generated Java
+parser with a scanner, that is, the scanner may reside in a separate file
+than the Bison grammar, or in the same file. The interface
+to the scanner is similar in the two cases.
+
+In the first case, where the scanner in the same file as the grammar, the
+scanner code has to be placed in @code{%code lexer} blocks. If you want
+to pass parameters from the parser constructor to the scanner constructor,
+specify them with @code{%lex-param}; they are passed before
+@code{%parse-param}s to the constructor.
+
+In the second case, the scanner has to implement the @code{Lexer} interface,
+which is defined within the parser class (e.g., @code{YYParser.Lexer}).
+The constructor of the parser object will then accept an object
+implementing the interface; @code{%lex-param} is not used in this
+case.
+
+In both cases, the scanner has to implement the following methods.
+
+@deftypemethod {Lexer} {void} yyerror (Location @var{l}, String @var{m})
As explained in @pxref{Java Parser Interface}, this method is defined
-by the user to emit an error message. The first parameter is not used
-unless location tracking is active. Its type can be changed using
+by the user to emit an error message. The first parameter is omitted
+if location tracking is not active. Its type can be changed using
@samp{%define "location_type" "@var{class-name}".}
@end deftypemethod
@deftypemethod {Lexer} {Position} getStartPos ()
@deftypemethodx {Lexer} {Position} getEndPos ()
-Return respectively the first position of the last token that yylex
-returned, and the first position beyond it. These methods are not
-needed unless location tracking is active.
+Return respectively the first position of the last token that
+@code{yylex} returned, and the first position beyond it. These
+methods are not needed unless location tracking is active.
The return type can be changed using @samp{%define "position_type"
"@var{class-name}".}
@end deftypemethod
@deftypemethod {Lexer} {Object} getLVal ()
-Return respectively the first position of the last token that yylex
-returned, and the first position beyond it.
+Return the semantical value of the last token that yylex returned.
-The return type can be changed using @samp{%define "union_name"
+The return type can be changed using @samp{%define "stype"
"@var{class-name}".}
@end deftypemethod
-If @code{%pure-parser} is not specified, the lexer interface
-resides in the same class (@code{YYParser}) as the Bison-generated
-parser. The fields and methods that are provided to
-this end are as follows.
+The lexer interface resides in the same class (@code{YYParser}) as the
+Bison-generated parser.
+The fields and methods that are provided to this end are as follows.
@deftypemethod {YYParser} {void} error (Location @var{l}, String @var{m})
-As explained in @pxref{Java Parser Interface}, this method is defined
+As already explained (@pxref{Java Parser Interface}), this method is defined
by the user to emit an error message. The first parameter is not used
unless location tracking is active. Its type can be changed using
@samp{%define "location_type" "@var{class-name}".}
Return respectively the first position of the last token that yylex
returned, and the first position beyond it.
-The field's type can be changed using @samp{%define "union_name"
+The field's type can be changed using @samp{%define "stype"
"@var{class-name}".}
@end deftypecv
-By default the class generated for a non-pure Java parser is abstract,
-and the methods @code{yylex} and @code{yyerror} shall be placed in a
-subclass (possibly defined in the additional code section). It is
-also possible, using the @code{%define "single_class"} declaration, to
-define the scanner in the same class as the parser; when this
-declaration is present, the class is not declared as abstract.
-In order to place the declarations for the scanner inside the
-parser class, you should use @code{%code} sections.
-
@node Java Differences
@subsection Differences between C/C++ and Java Grammars
The different structure of the Java language forces several differences
between C/C++ grammars, and grammars designed for Java parsers. This
-section summarizes this differences.
+section summarizes these differences.
@itemize
@item
-Since Java lacks a preprocessor, the @code{YYERROR}, @code{YYACCEPT},
+Java lacks a preprocessor, so the @code{YYERROR}, @code{YYACCEPT},
@code{YYABORT} symbols (@pxref{Table of Symbols}) cannot obviously be
-macros. Instead, they should be preceded in an action with
-@code{return}. The actual definition of these symbols should be
+macros. Instead, they should be preceded by @code{return} when they
+appear in an action. The actual definition of these symbols is
opaque to the Bison grammar, and it might change in the future. The
only meaningful operation that you can do, is to return them.
@item
The prolog declarations have a different meaning than in C/C++ code.
-@table @code
-@item %code
-@code{%code imports} blocks are placed at the beginning of the Java
-source code. They may include copyright notices. For a @code{package}
-declarations, it is suggested to use @code{%define package} instead.
-
-@code{%code} blocks are placed inside the parser class. If @code{%define
-single_class} is being used, the definitions of @code{yylex} and
-@code{yyerror} should be placed here. Subroutines for the parser actions
-may be included in this kind of block.
+@table @asis
+@item @code{%code imports}
+blocks are placed at the beginning of the Java source code. They may
+include copyright notices. For a @code{package} declarations, it is
+suggested to use @code{%define package} instead.
+
+@item unqualified @code{%code}
+blocks are placed inside the parser class.
+
+@item @code{%code lexer}
+blocks, if specified, should include the implementation of the
+scanner. If there is no such block, the scanner can be any class
+that implements the appropriate interface (see @pxref{Java Scanner
+Interface}).
+@end table
Other @code{%code} blocks are not supported in Java parsers.
-@end table
+The epilogue has the same meaning as in C/C++ code and it can
+be used to define other classes used by the parser.
@end itemize
@c ================================================= FAQ
@display
My parser includes support for an @samp{#include}-like feature, in
which case I run @code{yyparse} from @code{yyparse}. This fails
-although I did specify I needed a @code{%pure-parser}.
+although I did specify @code{%define api.pure}.
@end display
These problems typically come not from Bison itself, but from
@end deffn
@deffn {Directive} %pure-parser
-Bison declaration to request a pure (reentrant) parser.
-@xref{Pure Decl, ,A Pure (Reentrant) Parser}.
+Deprecated version of @code{%define api.pure} (@pxref{Decl Summary, ,%define}),
+for which Bison is more careful to warn about unreasonable usage.
@end deffn
@deffn {Directive} %require "@var{version}"
@deffn {Variable} yynerrs
Global variable which Bison increments each time it reports a syntax error.
-(In a pure parser, it is a local variable within @code{yyparse}.)
+(In a pure parser, it is a local variable within @code{yyparse}. In a
+pure push parser, it is a member of yypstate.)
@xref{Error Reporting, ,The Error Reporting Function @code{yyerror}}.
@end deffn
parsing. @xref{Parser Function, ,The Parser Function @code{yyparse}}.
@end deffn
+@deffn {Function} yypstate_delete
+The function to delete a parser instance, produced by Bison in push mode;
+call this function to delete the memory associated with a parser.
+@xref{Parser Delete Function, ,The Parser Delete Function
+@code{yypstate_delete}}.
+(The current push parsing interface is experimental and may evolve.
+More user feedback will help to stabilize it.)
+@end deffn
+
+@deffn {Function} yypstate_new
+The function to create a parser instance, produced by Bison in push mode;
+call this function to create a new parser.
+@xref{Parser Create Function, ,The Parser Create Function
+@code{yypstate_new}}.
+(The current push parsing interface is experimental and may evolve.
+More user feedback will help to stabilize it.)
+@end deffn
+
+@deffn {Function} yypull_parse
+The parser function produced by Bison in push mode; call this function to
+parse the rest of the input stream.
+@xref{Pull Parser Function, ,The Pull Parser Function
+@code{yypull_parse}}.
+(The current push parsing interface is experimental and may evolve.
+More user feedback will help to stabilize it.)
+@end deffn
+
+@deffn {Function} yypush_parse
+The parser function produced by Bison in push mode; call this function to
+parse a single token. @xref{Push Parser Function, ,The Push Parser Function
+@code{yypush_parse}}.
+(The current push parsing interface is experimental and may evolve.
+More user feedback will help to stabilize it.)
+@end deffn
+
@deffn {Macro} YYPARSE_PARAM
An obsolete macro for specifying the name of a parameter that
@code{yyparse} should accept. The use of this macro is deprecated, and
@node Copying This Manual
@appendix Copying This Manual
-
-@menu
-* GNU Free Documentation License:: License for copying this manual.
-@end menu
-
@include fdl.texi
@node Index
projects / bison.git / blobdiff