+$use_git || test -d "$GNULIB_SRCDIR" \
+ || die "Error: --no-git requires --gnulib-srcdir"
+
+if test -n "$checkout_only_file" && test ! -r "$checkout_only_file"; then
+ die "Bootstrapping from a non-checked-out distribution is risky."
+fi
+
+# Ensure that lines starting with ! sort last, per gitignore conventions
+# for whitelisting exceptions after a more generic blacklist pattern.
+sort_patterns() {
+ sort -u "$@" | sed '/^!/ {
+ H
+ d
+ }
+ $ {
+ P
+ x
+ s/^\n//
+ }' | sed '/^$/d'
+}
+
+# If $STR is not already on a line by itself in $FILE, insert it,
+# sorting the new contents of the file and replacing $FILE with the result.
+insert_sorted_if_absent() {
+ file=$1
+ str=$2
+ test -f $file || touch $file
+ echo "$str" | sort_patterns - $file | cmp -s - $file > /dev/null \
+ || { echo "$str" | sort_patterns - $file > $file.bak \
+ && mv $file.bak $file; } \
+ || die "insert_sorted_if_absent $file $str: failed"
+}
+
+# Adjust $PATTERN for $VC_IGNORE_FILE and insert it with
+# insert_sorted_if_absent.
+insert_vc_ignore() {
+ vc_ignore_file="$1"
+ pattern="$2"
+ case $vc_ignore_file in
+ *.gitignore)
+ # A .gitignore entry that does not start with '/' applies
+ # recursively to subdirectories, so prepend '/' to every
+ # .gitignore entry.
+ pattern=$(echo "$pattern" | sed s,^,/,);;
+ esac
+ insert_sorted_if_absent "$vc_ignore_file" "$pattern"
+}
+
+# Die if there is no AC_CONFIG_AUX_DIR($build_aux) line in configure.ac.
+found_aux_dir=no
+grep '^[ ]*AC_CONFIG_AUX_DIR(\['"$build_aux"'\])' configure.ac \
+ >/dev/null && found_aux_dir=yes
+grep '^[ ]*AC_CONFIG_AUX_DIR('"$build_aux"')' configure.ac \
+ >/dev/null && found_aux_dir=yes
+test $found_aux_dir = yes \
+ || die "configure.ac lacks 'AC_CONFIG_AUX_DIR([$build_aux])'; add it"
+
+# If $build_aux doesn't exist, create it now, otherwise some bits
+# below will malfunction. If creating it, also mark it as ignored.
+if test ! -d $build_aux; then
+ mkdir $build_aux
+ for dot_ig in x $vc_ignore; do
+ test $dot_ig = x && continue
+ insert_vc_ignore $dot_ig $build_aux
+ done
+fi
+
+# Note this deviates from the version comparison in automake
+# in that it treats 1.5 < 1.5.0, and treats 1.4.4a < 1.4-p3a
+# but this should suffice as we won't be specifying old
+# version formats or redundant trailing .0 in bootstrap.conf.
+# If we did want full compatibility then we should probably
+# use m4_version_compare from autoconf.
+sort_ver() { # sort -V is not generally available
+ ver1="$1"
+ ver2="$2"
+
+ # split on '.' and compare each component
+ i=1
+ while : ; do
+ p1=$(echo "$ver1" | cut -d. -f$i)
+ p2=$(echo "$ver2" | cut -d. -f$i)
+ if [ ! "$p1" ]; then
+ echo "$1 $2"
+ break
+ elif [ ! "$p2" ]; then
+ echo "$2 $1"
+ break
+ elif [ ! "$p1" = "$p2" ]; then
+ if [ "$p1" -gt "$p2" ] 2>/dev/null; then # numeric comparison
+ echo "$2 $1"
+ elif [ "$p2" -gt "$p1" ] 2>/dev/null; then # numeric comparison
+ echo "$1 $2"
+ else # numeric, then lexicographic comparison
+ lp=$(printf "$p1\n$p2\n" | LANG=C sort -n | tail -n1)
+ if [ "$lp" = "$p2" ]; then
+ echo "$1 $2"
+ else
+ echo "$2 $1"
+ fi
+ fi
+ break
+ fi
+ i=$(($i+1))
+ done
+}
+
+get_version() {
+ app=$1
+
+ $app --version >/dev/null 2>&1 || return 1
+
+ $app --version 2>&1 |
+ sed -n '# Move version to start of line.
+ s/.*[v ]\([0-9]\)/\1/
+
+ # Skip lines that do not start with version.
+ /^[0-9]/!d
+
+ # Remove characters after the version.
+ s/[^.a-z0-9-].*//
+
+ # The first component must be digits only.
+ s/^\([0-9]*\)[a-z-].*/\1/
+
+ #the following essentially does s/5.005/5.5/
+ s/\.0*\([1-9]\)/.\1/g
+ p
+ q'
+}
+
+check_versions() {
+ ret=0
+
+ while read app req_ver; do
+ # We only need libtoolize from the libtool package.
+ if test "$app" = libtool; then
+ app=libtoolize
+ fi
+ # Exempt git if --no-git is in effect.
+ if test "$app" = git; then
+ $use_git || continue
+ fi
+ # Honor $APP variables ($TAR, $AUTOCONF, etc.)
+ appvar=$(echo $app | LC_ALL=C tr '[a-z]-' '[A-Z]_')
+ test "$appvar" = TAR && appvar=AMTAR
+ case $appvar in
+ GZIP) ;; # Do not use $GZIP: it contains gzip options.
+ *) eval "app=\${$appvar-$app}" ;;
+ esac
+
+ # Handle the still-experimental Automake-NG programs specially.
+ # They remain named as the mainstream Automake programs ("automake",
+ # and "aclocal") to avoid gratuitous incompatibilities with
+ # pre-existing usages (by, say, autoreconf, or custom autogen.sh
+ # scripts), but correctly identify themselves (as being part of
+ # "GNU automake-ng") when asked their version.
+ case $app in
+ automake-ng|aclocal-ng)
+ app=${app%-ng}
+ ($app --version | grep '(GNU automake-ng)') >/dev/null 2>&1 || {
+ warn_ "Error: '$app' not found or not from Automake-NG"
+ ret=1
+ continue
+ } ;;
+ esac
+ if [ "$req_ver" = "-" ]; then
+ # Merely require app to exist; not all prereq apps are well-behaved
+ # so we have to rely on $? rather than get_version.
+ $app --version >/dev/null 2>&1
+ if [ 126 -le $? ]; then
+ warn_ "Error: '$app' not found"
+ ret=1
+ fi
+ else
+ # Require app to produce a new enough version string.
+ inst_ver=$(get_version $app)
+ if [ ! "$inst_ver" ]; then
+ warn_ "Error: '$app' not found"
+ ret=1
+ else
+ latest_ver=$(sort_ver $req_ver $inst_ver | cut -d' ' -f2)
+ if [ ! "$latest_ver" = "$inst_ver" ]; then
+ warnf_ '%s\n' \
+ "Error: '$app' version == $inst_ver is too old" \
+ " '$app' version >= $req_ver is required"
+ ret=1
+ fi
+ fi
+ fi
+ done
+
+ return $ret
+}
+
+print_versions() {
+ echo "Program Min_version"
+ echo "----------------------"
+ printf %s "$buildreq"
+ echo "----------------------"
+ # can't depend on column -t
+}
+
+use_libtool=0
+# We'd like to use grep -E, to see if any of LT_INIT,
+# AC_PROG_LIBTOOL, AM_PROG_LIBTOOL is used in configure.ac,
+# but that's not portable enough (e.g., for Solaris).
+grep '^[ ]*A[CM]_PROG_LIBTOOL' configure.ac >/dev/null \
+ && use_libtool=1
+grep '^[ ]*LT_INIT' configure.ac >/dev/null \
+ && use_libtool=1
+if test $use_libtool = 1; then
+ find_tool LIBTOOLIZE glibtoolize libtoolize
+fi
+
+# gnulib-tool requires at least automake and autoconf.
+# If either is not listed, add it (with minimum version) as a prerequisite.
+case $buildreq in
+ *automake*) ;;
+ *) buildreq="automake 1.9
+$buildreq" ;;
+esac
+case $buildreq in
+ *autoconf*) ;;
+ *) buildreq="autoconf 2.59
+$buildreq" ;;
+esac
+
+# When we can deduce that gnulib-tool will require patch,
+# and when patch is not already listed as a prerequisite, add it, too.
+if test -d "$local_gl_dir" \
+ && ! find "$local_gl_dir" -name '*.diff' -exec false {} +; then
+ case $buildreq in
+ *patch*) ;;
+ *) buildreq="patch -
+$buildreq" ;;
+ esac
+fi
+
+if ! printf "$buildreq" | check_versions; then
+ echo >&2
+ if test -f README-prereq; then
+ die "See README-prereq for how to get the prerequisite programs"
+ else
+ die "Please install the prerequisite programs"
+ fi
+fi
+
+echo "$0: Bootstrapping from checked-out $package sources..."
+
+# See if we can use gnulib's git-merge-changelog merge driver.
+if test -d .git && (git --version) >/dev/null 2>/dev/null ; then
+ if git config merge.merge-changelog.driver >/dev/null ; then
+ :
+ elif (git-merge-changelog --version) >/dev/null 2>/dev/null ; then
+ echo "$0: initializing git-merge-changelog driver"
+ git config merge.merge-changelog.name 'GNU-style ChangeLog merge driver'
+ git config merge.merge-changelog.driver 'git-merge-changelog %O %A %B'
+ else
+ echo "$0: consider installing git-merge-changelog from gnulib"
+ fi
+fi
+
projects / bison.git / blobdiff