+++ /dev/null
-divert(-1)# -*- Autoconf -*-
-# This file is part of Autoconf.
-# Base M4 layer.
-# Requires GNU M4.
-#
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007,
-# 2008 Free Software Foundation, Inc.
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-# As a special exception, the Free Software Foundation gives unlimited
-# permission to copy, distribute and modify the configure scripts that
-# are the output of Autoconf. You need not follow the terms of the GNU
-# General Public License when using or distributing such scripts, even
-# though portions of the text of Autoconf appear in them. The GNU
-# General Public License (GPL) does govern all other use of the material
-# that constitutes the Autoconf program.
-#
-# Certain portions of the Autoconf source text are designed to be copied
-# (in certain cases, depending on the input) into the output of
-# Autoconf. We call these the "data" portions. The rest of the Autoconf
-# source text consists of comments plus executable code that decides which
-# of the data portions to output in any given case. We call these
-# comments and executable code the "non-data" portions. Autoconf never
-# copies any of the non-data portions into its output.
-#
-# This special exception to the GPL applies to versions of Autoconf
-# released by the Free Software Foundation. When you make and
-# distribute a modified version of Autoconf, you may extend this special
-# exception to the GPL to apply to your modified version as well, *unless*
-# your modified version has the potential to copy into its output some
-# of the text that was the non-data portion of the version that you started
-# with. (In other words, unless your change moves or copies text from
-# the non-data portions to the data portions.) If your modification has
-# such potential, you must delete any notice of this special exception
-# to the GPL from your modified version.
-#
-# Written by Akim Demaille.
-#
-
-# Set the quotes, whatever the current quoting system.
-changequote()
-changequote([, ])
-
-# Some old m4's don't support m4exit. But they provide
-# equivalent functionality by core dumping because of the
-# long macros we define.
-ifdef([__gnu__], ,
-[errprint(M4sugar requires GNU M4. Install it before installing M4sugar or
-set the M4 environment variable to its absolute file name.)
-m4exit(2)])
-
-
-## ------------------------------- ##
-## 1. Simulate --prefix-builtins. ##
-## ------------------------------- ##
-
-# m4_define
-# m4_defn
-# m4_undefine
-define([m4_define], defn([define]))
-define([m4_defn], defn([defn]))
-define([m4_undefine], defn([undefine]))
-
-m4_undefine([define])
-m4_undefine([defn])
-m4_undefine([undefine])
-
-
-# m4_copy(SRC, DST)
-# -----------------
-# Define DST as the definition of SRC.
-# What's the difference between:
-# 1. m4_copy([from], [to])
-# 2. m4_define([to], [from($@)])
-# Well, obviously 1 is more expensive in space. Maybe 2 is more expensive
-# in time, but because of the space cost of 1, it's not that obvious.
-# Nevertheless, one huge difference is the handling of `$0'. If `from'
-# uses `$0', then with 1, `to''s `$0' is `to', while it is `from' in 2.
-# The user would certainly prefer to see `to'.
-m4_define([m4_copy],
-[m4_define([$2], m4_defn([$1]))])
-
-
-# m4_rename(SRC, DST)
-# -------------------
-# Rename the macro SRC to DST.
-m4_define([m4_rename],
-[m4_copy([$1], [$2])m4_undefine([$1])])
-
-
-# m4_rename_m4(MACRO-NAME)
-# ------------------------
-# Rename MACRO-NAME to m4_MACRO-NAME.
-m4_define([m4_rename_m4],
-[m4_rename([$1], [m4_$1])])
-
-
-# m4_copy_unm4(m4_MACRO-NAME)
-# ---------------------------
-# Copy m4_MACRO-NAME to MACRO-NAME.
-m4_define([m4_copy_unm4],
-[m4_copy([$1], m4_bpatsubst([$1], [^m4_\(.*\)], [[\1]]))])
-
-
-# Some m4 internals have names colliding with tokens we might use.
-# Rename them a` la `m4 --prefix-builtins'. Conditionals first, since
-# some subsequent renames are conditional.
-m4_rename_m4([ifdef])
-m4_rename([ifelse], [m4_if])
-
-m4_rename_m4([builtin])
-m4_rename_m4([changecom])
-m4_rename_m4([changequote])
-m4_ifdef([changeword],dnl conditionally available in 1.4.x
-[m4_undefine([changeword])])
-m4_rename_m4([debugfile])
-m4_rename_m4([debugmode])
-m4_rename_m4([decr])
-m4_undefine([divert])
-m4_rename_m4([divnum])
-m4_rename_m4([dumpdef])
-m4_rename_m4([errprint])
-m4_rename_m4([esyscmd])
-m4_rename_m4([eval])
-m4_rename_m4([format])
-m4_undefine([include])
-m4_rename_m4([incr])
-m4_rename_m4([index])
-m4_rename_m4([indir])
-m4_rename_m4([len])
-m4_rename([m4exit], [m4_exit])
-m4_undefine([m4wrap])
-m4_ifdef([mkstemp],dnl added in M4 1.4.8
-[m4_rename_m4([mkstemp])
-m4_copy([m4_mkstemp], [m4_maketemp])
-m4_undefine([maketemp])],
-[m4_rename_m4([maketemp])
-m4_copy([m4_maketemp], [m4_mkstemp])])
-m4_rename([patsubst], [m4_bpatsubst])
-m4_rename_m4([popdef])
-m4_rename_m4([pushdef])
-m4_rename([regexp], [m4_bregexp])
-m4_rename_m4([shift])
-m4_undefine([sinclude])
-m4_rename_m4([substr])
-m4_ifdef([symbols],dnl present only in alpha-quality 1.4o
-[m4_rename_m4([symbols])])
-m4_rename_m4([syscmd])
-m4_rename_m4([sysval])
-m4_rename_m4([traceoff])
-m4_rename_m4([traceon])
-m4_rename_m4([translit])
-m4_undefine([undivert])
-
-
-## ------------------- ##
-## 2. Error messages. ##
-## ------------------- ##
-
-
-# m4_location
-# -----------
-m4_define([m4_location],
-[__file__:__line__])
-
-
-# m4_errprintn(MSG)
-# -----------------
-# Same as `errprint', but with the missing end of line.
-m4_define([m4_errprintn],
-[m4_errprint([$1
-])])
-
-
-# m4_warning(MSG)
-# ---------------
-# Warn the user.
-m4_define([m4_warning],
-[m4_errprintn(m4_location[: warning: $1])])
-
-
-# m4_fatal(MSG, [EXIT-STATUS])
-# ----------------------------
-# Fatal the user. :)
-m4_define([m4_fatal],
-[m4_errprintn(m4_location[: error: $1])dnl
-m4_expansion_stack_dump()dnl
-m4_exit(m4_if([$2],, 1, [$2]))])
-
-
-# m4_assert(EXPRESSION, [EXIT-STATUS = 1])
-# ----------------------------------------
-# This macro ensures that EXPRESSION evaluates to true, and exits if
-# EXPRESSION evaluates to false.
-m4_define([m4_assert],
-[m4_if(m4_eval([$1]), 0,
- [m4_fatal([assert failed: $1], [$2])])])
-
-
-
-## ------------- ##
-## 3. Warnings. ##
-## ------------- ##
-
-
-# _m4_warn(CATEGORY, MESSAGE, STACK-TRACE)
-# ----------------------------------------
-# Report a MESSAGE to the user if the CATEGORY of warnings is enabled.
-# This is for traces only.
-# The STACK-TRACE is a \n-separated list of "LOCATION: MESSAGE".
-#
-# Within m4, the macro is a no-op. This macro really matters
-# when autom4te post-processes the trace output.
-m4_define([_m4_warn], [])
-
-
-# m4_warn(CATEGORY, MESSAGE)
-# --------------------------
-# Report a MESSAGE to the user if the CATEGORY of warnings is enabled.
-m4_define([m4_warn],
-[_m4_warn([$1], [$2],
-m4_ifdef([m4_expansion_stack],
- [_m4_defn([m4_expansion_stack])
-m4_location[: the top level]]))dnl
-])
-
-
-
-## ------------------- ##
-## 4. File inclusion. ##
-## ------------------- ##
-
-
-# We also want to neutralize include (and sinclude for symmetry),
-# but we want to extend them slightly: warn when a file is included
-# several times. This is, in general, a dangerous operation, because
-# too many people forget to quote the first argument of m4_define.
-#
-# For instance in the following case:
-# m4_define(foo, [bar])
-# then a second reading will turn into
-# m4_define(bar, [bar])
-# which is certainly not what was meant.
-
-# m4_include_unique(FILE)
-# -----------------------
-# Declare that the FILE was loading; and warn if it has already
-# been included.
-m4_define([m4_include_unique],
-[m4_ifdef([m4_include($1)],
- [m4_warn([syntax], [file `$1' included several times])])dnl
-m4_define([m4_include($1)])])
-
-
-# m4_include(FILE)
-# ----------------
-# Like the builtin include, but warns against multiple inclusions.
-m4_define([m4_include],
-[m4_include_unique([$1])dnl
-m4_builtin([include], [$1])])
-
-
-# m4_sinclude(FILE)
-# -----------------
-# Like the builtin sinclude, but warns against multiple inclusions.
-m4_define([m4_sinclude],
-[m4_include_unique([$1])dnl
-m4_builtin([sinclude], [$1])])
-
-
-
-## ------------------------------------ ##
-## 5. Additional branching constructs. ##
-## ------------------------------------ ##
-
-# Both `m4_ifval' and `m4_ifset' tests against the empty string. The
-# difference is that `m4_ifset' is specialized on macros.
-#
-# In case of arguments of macros, eg. $1, it makes little difference.
-# In the case of a macro `FOO', you don't want to check `m4_ifval(FOO,
-# TRUE)', because if `FOO' expands with commas, there is a shifting of
-# the arguments. So you want to run `m4_ifval([FOO])', but then you just
-# compare the *string* `FOO' against `', which, of course fails.
-#
-# So you want the variation `m4_ifset' that expects a macro name as $1.
-# If this macro is both defined and defined to a non empty value, then
-# it runs TRUE, etc.
-
-
-# m4_ifval(COND, [IF-TRUE], [IF-FALSE])
-# -------------------------------------
-# If COND is not the empty string, expand IF-TRUE, otherwise IF-FALSE.
-# Comparable to m4_ifdef.
-m4_define([m4_ifval],
-[m4_if([$1], [], [$3], [$2])])
-
-
-# m4_n(TEXT)
-# ----------
-# If TEXT is not empty, return TEXT and a new line, otherwise nothing.
-m4_define([m4_n],
-[m4_if([$1],
- [], [],
- [$1
-])])
-
-
-# m4_ifvaln(COND, [IF-TRUE], [IF-FALSE])
-# --------------------------------------
-# Same as `m4_ifval', but add an extra newline to IF-TRUE or IF-FALSE
-# unless that argument is empty.
-m4_define([m4_ifvaln],
-[m4_if([$1],
- [], [m4_n([$3])],
- [m4_n([$2])])])
-
-
-# m4_ifset(MACRO, [IF-TRUE], [IF-FALSE])
-# --------------------------------------
-# If MACRO has no definition, or of its definition is the empty string,
-# expand IF-FALSE, otherwise IF-TRUE.
-m4_define([m4_ifset],
-[m4_ifdef([$1],
- [m4_ifval(_m4_defn([$1]), [$2], [$3])],
- [$3])])
-
-
-# m4_ifndef(NAME, [IF-NOT-DEFINED], [IF-DEFINED])
-# -----------------------------------------------
-m4_define([m4_ifndef],
-[m4_ifdef([$1], [$3], [$2])])
-
-
-# m4_case(SWITCH, VAL1, IF-VAL1, VAL2, IF-VAL2, ..., DEFAULT)
-# -----------------------------------------------------------
-# m4 equivalent of
-# switch (SWITCH)
-# {
-# case VAL1:
-# IF-VAL1;
-# break;
-# case VAL2:
-# IF-VAL2;
-# break;
-# ...
-# default:
-# DEFAULT;
-# break;
-# }.
-# All the values are optional, and the macro is robust to active
-# symbols properly quoted.
-m4_define([m4_case],
-[m4_if([$#], 0, [],
- [$#], 1, [],
- [$#], 2, [$2],
- [$1], [$2], [$3],
- [$0([$1], m4_shift3($@))])])
-
-
-# m4_bmatch(SWITCH, RE1, VAL1, RE2, VAL2, ..., DEFAULT)
-# -----------------------------------------------------
-# m4 equivalent of
-#
-# if (SWITCH =~ RE1)
-# VAL1;
-# elif (SWITCH =~ RE2)
-# VAL2;
-# elif ...
-# ...
-# else
-# DEFAULT
-#
-# All the values are optional, and the macro is robust to active symbols
-# properly quoted.
-m4_define([m4_bmatch],
-[m4_if([$#], 0, [m4_fatal([$0: too few arguments: $#])],
- [$#], 1, [m4_fatal([$0: too few arguments: $#: $1])],
- [$#], 2, [$2],
- [m4_if(m4_bregexp([$1], [$2]), -1, [$0([$1], m4_shift3($@))],
- [$3])])])
-
-
-# m4_car(LIST)
-# m4_cdr(LIST)
-# ------------
-# Manipulate m4 lists.
-m4_define([m4_car], [[$1]])
-m4_define([m4_cdr],
-[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
- [$#], 1, [],
- [m4_dquote(m4_shift($@))])])
-
-# _m4_cdr(LIST)
-# -------------
-# Like m4_cdr, except include a leading comma unless only one element
-# remains. Why? Because comparing a large list against [] is more
-# expensive in expansion time than comparing the number of arguments; so
-# _m4_cdr can be used to reduce the number of arguments when it is time
-# to end recursion.
-m4_define([_m4_cdr],
-[m4_if([$#], 1, [],
- [, m4_dquote(m4_shift($@))])])
-
-
-
-# m4_cond(TEST1, VAL1, IF-VAL1, TEST2, VAL2, IF-VAL2, ..., [DEFAULT])
-# -------------------------------------------------------------------
-# Similar to m4_if, except that each TEST is expanded when encountered.
-# If the expansion of TESTn matches the string VALn, the result is IF-VALn.
-# The result is DEFAULT if no tests passed. This macro allows
-# short-circuiting of expensive tests, where it pays to arrange quick
-# filter tests to run first.
-#
-# For an example, consider a previous implementation of _AS_QUOTE_IFELSE:
-#
-# m4_if(m4_index([$1], [\]), [-1], [$2],
-# m4_eval(m4_index([$1], [\\]) >= 0), [1], [$2],
-# m4_eval(m4_index([$1], [\$]) >= 0), [1], [$2],
-# m4_eval(m4_index([$1], [\`]) >= 0), [1], [$3],
-# m4_eval(m4_index([$1], [\"]) >= 0), [1], [$3],
-# [$2])
-#
-# Here, m4_index is computed 5 times, and m4_eval 4, even if $1 contains
-# no backslash. It is more efficient to do:
-#
-# m4_cond([m4_index([$1], [\])], [-1], [$2],
-# [m4_eval(m4_index([$1], [\\]) >= 0)], [1], [$2],
-# [m4_eval(m4_index([$1], [\$]) >= 0)], [1], [$2],
-# [m4_eval(m4_index([$1], [\`]) >= 0)], [1], [$3],
-# [m4_eval(m4_index([$1], [\"]) >= 0)], [1], [$3],
-# [$2])
-#
-# In the common case of $1 with no backslash, only one m4_index expansion
-# occurs, and m4_eval is avoided altogether.
-m4_define([m4_cond],
-[m4_if([$#], [0], [m4_fatal([$0: cannot be called without arguments])],
- [$#], [1], [$1],
- m4_eval([$# % 3]), [2], [m4_fatal([$0: missing an argument])],
- [_$0($@)])])
-
-m4_define([_m4_cond],
-[m4_if(($1), [($2)], [$3],
- [$#], [3], [],
- [$#], [4], [$4],
- [$0(m4_shift3($@))])])
-
-
-## ---------------------------------------- ##
-## 6. Enhanced version of some primitives. ##
-## ---------------------------------------- ##
-
-# m4_bpatsubsts(STRING, RE1, SUBST1, RE2, SUBST2, ...)
-# ----------------------------------------------------
-# m4 equivalent of
-#
-# $_ = STRING;
-# s/RE1/SUBST1/g;
-# s/RE2/SUBST2/g;
-# ...
-#
-# All the values are optional, and the macro is robust to active symbols
-# properly quoted.
-#
-# I would have liked to name this macro `m4_bpatsubst', unfortunately,
-# due to quotation problems, I need to double quote $1 below, therefore
-# the anchors are broken :( I can't let users be trapped by that.
-#
-# Recall that m4_shift3 always results in an argument. Hence, we need
-# to distinguish between a final deletion vs. ending recursion.
-m4_define([m4_bpatsubsts],
-[m4_if([$#], 0, [m4_fatal([$0: too few arguments: $#])],
- [$#], 1, [m4_fatal([$0: too few arguments: $#: $1])],
- [$#], 2, [m4_unquote(m4_builtin([patsubst], [[$1]], [$2]))],
- [$#], 3, [m4_unquote(m4_builtin([patsubst], [[$1]], [$2], [$3]))],
- [_$0($@m4_if(m4_eval($# & 1), 0, [,]))])])
-m4_define([_m4_bpatsubsts],
-[m4_if([$#], 2, [$1],
- [$0(m4_builtin([patsubst], [[$1]], [$2], [$3]),
- m4_shift3($@))])])
-
-
-# m4_define_default(MACRO, VALUE)
-# -------------------------------
-# If MACRO is undefined, set it to VALUE.
-m4_define([m4_define_default],
-[m4_ifndef([$1], [m4_define($@)])])
-
-
-# m4_default(EXP1, EXP2)
-# ----------------------
-# Returns EXP1 if non empty, otherwise EXP2.
-#
-# This macro is called on hot paths, so inline the contents of m4_ifval,
-# for one less round of expansion.
-m4_define([m4_default],
-[m4_if([$1], [], [$2], [$1])])
-
-
-# m4_defn(NAME)
-# -------------
-# Like the original, except guarantee a warning when using something which is
-# undefined (unlike M4 1.4.x). This replacement is not a full-featured
-# replacement: if any of the defined macros contain unbalanced quoting, but
-# when pasted together result in a well-quoted string, then only native m4
-# support is able to get it correct. But that's where quadrigraphs come in
-# handy, if you really need unbalanced quotes inside your macros.
-#
-# This macro is called frequently, so minimize the amount of additional
-# expansions by skipping m4_ifndef. Better yet, if __m4_version__ exists,
-# (added in M4 1.6), then let m4 do the job for us.
-#
-# _m4_defn is for internal use only - it bypasses the wrapper, so it
-# must only be used on one argument at a time, and only on macros
-# known to be defined. Make sure this still works if the user renames
-# m4_defn but not _m4_defn.
-m4_copy([m4_defn], [_m4_defn])
-m4_ifdef([__m4_version__], [],
-[m4_define([m4_defn],
-[m4_if([$#], [0], [[$0]],
- [$#], [1], [m4_ifdef([$1], [_m4_defn([$1])],
- [m4_fatal([$0: undefined macro: $1])])],
- [m4_foreach([_m4_macro], [$@], [$0(_m4_defn([_m4_macro]))])])])])
-
-
-# _m4_dumpdefs_up(NAME)
-# ---------------------
-m4_define([_m4_dumpdefs_up],
-[m4_ifdef([$1],
- [m4_pushdef([_m4_dumpdefs], _m4_defn([$1]))dnl
-m4_dumpdef([$1])dnl
-_m4_popdef([$1])dnl
-_m4_dumpdefs_up([$1])])])
-
-
-# _m4_dumpdefs_down(NAME)
-# -----------------------
-m4_define([_m4_dumpdefs_down],
-[m4_ifdef([_m4_dumpdefs],
- [m4_pushdef([$1], _m4_defn([_m4_dumpdefs]))dnl
-_m4_popdef([_m4_dumpdefs])dnl
-_m4_dumpdefs_down([$1])])])
-
-
-# m4_dumpdefs(NAME)
-# -----------------
-# Similar to `m4_dumpdef(NAME)', but if NAME was m4_pushdef'ed, display its
-# value stack (most recent displayed first).
-m4_define([m4_dumpdefs],
-[_m4_dumpdefs_up([$1])dnl
-_m4_dumpdefs_down([$1])])
-
-
-# m4_popdef(NAME)
-# ---------------
-# Like the original, except guarantee a warning when using something which is
-# undefined (unlike M4 1.4.x).
-#
-# This macro is called frequently, so minimize the amount of additional
-# expansions by skipping m4_ifndef. Better yet, if __m4_version__ exists,
-# (added in M4 1.6), then let m4 do the job for us.
-#
-# _m4_popdef is for internal use only - it bypasses the wrapper, so it
-# must only be used on macros known to be defined. Make sure this
-# still works if the user renames m4_popdef but not _m4_popdef.
-m4_copy([m4_popdef], [_m4_popdef])
-m4_ifdef([__m4_version__], [],
-[m4_define([m4_popdef],
-[m4_if([$#], [0], [[$0]],
- [$#], [1], [m4_ifdef([$1], [_m4_popdef([$1])],
- [m4_fatal([$0: undefined macro: $1])])],
- [m4_foreach([_m4_macro], [$@], [$0(_m4_defn([_m4_macro]))])])])])
-
-
-# m4_shiftn(N, ...)
-# -----------------
-# Returns ... shifted N times. Useful for recursive "varargs" constructs.
-#
-# Autoconf does not use this macro, because it is inherently slower than
-# calling the common cases of m4_shift2 or m4_shift3 directly. But it
-# might as well be fast for other clients, such as Libtool. One way to
-# do this is to expand $@ only once in _m4_shiftn (otherwise, for long
-# lists, the expansion of m4_if takes twice as much memory as what the
-# list itself occupies, only to throw away the unused branch). The end
-# result is strictly equivalent to
-# m4_if([$1], 1, [m4_shift(,m4_shift(m4_shift($@)))],
-# [_m4_shiftn(m4_decr([$1]), m4_shift(m4_shift($@)))])
-# but with the final `m4_shift(m4_shift($@)))' shared between the two
-# paths. The first leg uses a no-op m4_shift(,$@) to balance out the ().
-m4_define([m4_shiftn],
-[m4_assert(0 < $1 && $1 < $#)_$0($@)])
-
-m4_define([_m4_shiftn],
-[m4_if([$1], 1, [m4_shift(],
- [$0(m4_decr([$1])]), m4_shift(m4_shift($@)))])
-
-# m4_shift2(...)
-# m4_shift3(...)
-# -----------------
-# Returns ... shifted twice, and three times. Faster than m4_shiftn.
-m4_define([m4_shift2], [m4_shift(m4_shift($@))])
-m4_define([m4_shift3], [m4_shift(m4_shift(m4_shift($@)))])
-
-# _m4_shift2(...)
-# _m4_shift3(...)
-# ---------------
-# Like m4_shift2 or m4_shift3, except include a leading comma unless shifting
-# consumes all arguments. Why? Because in recursion, it is nice to
-# distinguish between 1 element left and 0 elements left, based on how many
-# arguments this shift expands to.
-m4_define([_m4_shift2],
-[m4_if([$#], [2], [],
- [, m4_shift(m4_shift($@))])])
-m4_define([_m4_shift3],
-[m4_if([$#], [3], [],
- [, m4_shift(m4_shift(m4_shift($@)))])])
-
-
-# m4_undefine(NAME)
-# -----------------
-# Like the original, except guarantee a warning when using something which is
-# undefined (unlike M4 1.4.x).
-#
-# This macro is called frequently, so minimize the amount of additional
-# expansions by skipping m4_ifndef. Better yet, if __m4_version__ exists,
-# (added in M4 1.6), then let m4 do the job for us.
-#
-# _m4_undefine is for internal use only - it bypasses the wrapper, so
-# it must only be used on macros known to be defined. Make sure this
-# still works if the user renames m4_undefine but not _m4_undefine.
-m4_copy([m4_undefine], [_m4_undefine])
-m4_ifdef([__m4_version__], [],
-[m4_define([m4_undefine],
-[m4_if([$#], [0], [[$0]],
- [$#], [1], [m4_ifdef([$1], [_m4_undefine([$1])],
- [m4_fatal([$0: undefined macro: $1])])],
- [m4_foreach([_m4_macro], [$@], [$0(_m4_defn([_m4_macro]))])])])])
-
-# _m4_wrap(PRE, POST)
-# -------------------
-# Helper macro for m4_wrap and m4_wrap_lifo. Allows nested calls to
-# m4_wrap within wrapped text. Use _m4_defn and _m4_popdef for speed.
-m4_define([_m4_wrap],
-[m4_ifdef([$0_text],
- [m4_define([$0_text], [$1]_m4_defn([$0_text])[$2])],
- [m4_builtin([m4wrap], [m4_unquote(
- _m4_defn([$0_text])_m4_popdef([$0_text]))])m4_define([$0_text], [$1$2])])])
-
-# m4_wrap(TEXT)
-# -------------
-# Append TEXT to the list of hooks to be executed at the end of input.
-# Whereas the order of the original may be LIFO in the underlying m4,
-# this version is always FIFO.
-m4_define([m4_wrap],
-[_m4_wrap([], [$1[]])])
-
-# m4_wrap_lifo(TEXT)
-# ------------------
-# Prepend TEXT to the list of hooks to be executed at the end of input.
-# Whereas the order of m4_wrap may be FIFO in the underlying m4, this
-# version is always LIFO.
-m4_define([m4_wrap_lifo],
-[_m4_wrap([$1[]])])
-
-## ------------------------- ##
-## 7. Quoting manipulation. ##
-## ------------------------- ##
-
-
-# m4_apply(MACRO, LIST)
-# ---------------------
-# Invoke MACRO, with arguments provided from the quoted list of
-# comma-separated quoted arguments. If LIST is empty, invoke MACRO
-# without arguments. The expansion will not be concatenated with
-# subsequent text.
-m4_define([m4_apply],
-[m4_if([$2], [], [$1], [$1($2)])[]])
-
-# _m4_apply(MACRO, LIST)
-# ----------------------
-# Like m4_apply, except do nothing if LIST is empty.
-m4_define([_m4_apply],
-[m4_if([$2], [], [], [$1($2)[]])])
-
-
-# m4_count(ARGS)
-# --------------
-# Return a count of how many ARGS are present.
-m4_define([m4_count], [$#])
-
-
-# m4_do(STRING, ...)
-# ------------------
-# This macro invokes all its arguments (in sequence, of course). It is
-# useful for making your macros more structured and readable by dropping
-# unnecessary dnl's and have the macros indented properly. No concatenation
-# occurs after a STRING; use m4_unquote(m4_join(,STRING)) for that.
-m4_define([m4_do],
-[m4_if([$#], 0, [],
- [$#], 1, [$1[]],
- [$1[]$0(m4_shift($@))])])
-
-
-# m4_dquote(ARGS)
-# ---------------
-# Return ARGS as a quoted list of quoted arguments.
-m4_define([m4_dquote], [[$@]])
-
-
-# m4_dquote_elt(ARGS)
-# -------------------
-# Return ARGS as an unquoted list of double-quoted arguments.
-m4_define([m4_dquote_elt],
-[m4_if([$#], [0], [],
- [$#], [1], [[[$1]]],
- [[[$1]],$0(m4_shift($@))])])
-
-
-# m4_echo(ARGS)
-# -------------
-# Return the ARGS, with the same level of quoting. Whitespace after
-# unquoted commas are consumed.
-m4_define([m4_echo], [$@])
-
-
-# m4_expand(ARG)
-# --------------
-# Return the expansion of ARG as a single string. Unlike m4_quote($1), this
-# correctly preserves whitespace following single-quoted commas that appeared
-# within ARG.
-#
-# m4_define([active], [ACT, IVE])
-# m4_define([active2], [[ACT, IVE]])
-# m4_quote(active, active2)
-# => ACT,IVE,ACT, IVE
-# m4_expand([active, active2])
-# => ACT, IVE, ACT, IVE
-#
-# Unfortunately, due to limitations in m4, ARG must expand to something
-# with balanced quotes (use quadrigraphs to get around this). The input
-# is not likely to have unbalanced -=<{(/)}>=- quotes, and it is possible
-# to have unbalanced (), provided it was specified with proper [] quotes.
-#
-# Exploit that extra () will group unquoted commas and the following
-# whitespace, then convert () to []. m4_bpatsubst can't handle newlines
-# inside $1, and m4_substr strips quoting. So we (ab)use m4_changequote.
-m4_define([m4_expand], [_$0(-=<{($1)}>=-)])
-m4_define([_m4_expand],
-[m4_changequote([-=<{(], [)}>=-])$1m4_changequote([, ])])
-
-
-# m4_ignore(ARGS)
-# ---------------
-# Expands to nothing. Useful for conditionally ignoring an arbitrary
-# number of arguments (see _m4_list_cmp for an example).
-m4_define([m4_ignore])
-
-
-# m4_make_list(ARGS)
-# ------------------
-# Similar to m4_dquote, this creates a quoted list of quoted ARGS. This
-# version is less efficient than m4_dquote, but separates each argument
-# with a comma and newline, rather than just comma, for readability.
-# When developing an m4sugar algorithm, you could temporarily use
-# m4_pushdef([m4_dquote],m4_defn([m4_make_list]))
-# around your code to make debugging easier.
-m4_define([m4_make_list], [m4_join([,
-], m4_dquote_elt($@))])
-
-
-# m4_noquote(STRING)
-# ------------------
-# Return the result of ignoring all quotes in STRING and invoking the
-# macros it contains. Amongst other things, this is useful for enabling
-# macro invocations inside strings with [] blocks (for instance regexps
-# and help-strings). On the other hand, since all quotes are disabled,
-# any macro expanded during this time that relies on nested [] quoting
-# will likely crash and burn. This macro is seldom useful; consider
-# m4_unquote or m4_expand instead.
-m4_define([m4_noquote],
-[m4_changequote([-=<{(],[)}>=-])$1-=<{()}>=-m4_changequote([,])])
-
-
-# m4_quote(ARGS)
-# --------------
-# Return ARGS as a single argument. Any whitespace after unquoted commas
-# is stripped. There is always output, even when there were no arguments.
-#
-# It is important to realize the difference between `m4_quote(exp)' and
-# `[exp]': in the first case you obtain the quoted *result* of the
-# expansion of EXP, while in the latter you just obtain the string
-# `exp'.
-m4_define([m4_quote], [[$*]])
-
-
-# _m4_quote(ARGS)
-# ---------------
-# Like m4_quote, except that when there are no arguments, there is no
-# output. For conditional scenarios (such as passing _m4_quote as the
-# macro name in m4_mapall), this feature can be used to distinguish between
-# one argument of the empty string vs. no arguments. However, in the
-# normal case with arguments present, this is less efficient than m4_quote.
-m4_define([_m4_quote],
-[m4_if([$#], [0], [], [[$*]])])
-
-
-# m4_reverse(ARGS)
-# ----------------
-# Output ARGS in reverse order.
-m4_define([m4_reverse],
-[m4_if([$#], [0], [], [$#], [1], [[$1]],
- [$0(m4_shift($@)), [$1]])])
-
-
-# m4_unquote(ARGS)
-# ----------------
-# Remove one layer of quotes from each ARG, performing one level of
-# expansion. For one argument, m4_unquote([arg]) is more efficient than
-# m4_do([arg]), but for multiple arguments, the difference is that
-# m4_unquote separates arguments with commas while m4_do concatenates.
-# Follow this macro with [] if concatenation with subsequent text is
-# undesired.
-m4_define([m4_unquote], [$*])
-
-
-## -------------------------- ##
-## 8. Implementing m4 loops. ##
-## -------------------------- ##
-
-
-# m4_for(VARIABLE, FIRST, LAST, [STEP = +/-1], EXPRESSION)
-# --------------------------------------------------------
-# Expand EXPRESSION defining VARIABLE to FROM, FROM + 1, ..., TO with
-# increments of STEP. Both limits are included, and bounds are
-# checked for consistency. The algorithm is robust to indirect
-# VARIABLE names. Changing VARIABLE inside EXPRESSION will not impact
-# the number of iterations.
-#
-# Uses _m4_defn for speed, and avoid dnl in the macro body.
-m4_define([m4_for],
-[m4_pushdef([$1], m4_eval([$2]))]dnl
-[m4_cond([m4_eval(([$3]) > ([$2]))], 1,
- [m4_pushdef([_m4_step], m4_eval(m4_default([$4],
- 1)))m4_assert(_m4_step > 0)_$0([$1], _m4_defn([$1]),
- m4_eval((([$3]) - ([$2])) / _m4_step * _m4_step + ([$2])),
- _m4_step, [$5])],
- [m4_eval(([$3]) < ([$2]))], 1,
- [m4_pushdef([_m4_step], m4_eval(m4_default([$4],
- -1)))m4_assert(_m4_step < 0)_$0([$1], _m4_defn([$1]),
- m4_eval((([$2]) - ([$3])) / -(_m4_step) * _m4_step + ([$2])),
- _m4_step, [$5])],
- [m4_pushdef([_m4_step])$5])[]]dnl
-[m4_popdef([_m4_step], [$1])])
-
-
-# _m4_for(VARIABLE, COUNT, LAST, STEP, EXPRESSION)
-# ------------------------------------------------
-# Core of the loop, no consistency checks, all arguments are plain
-# numbers. Define VARIABLE to COUNT, expand EXPRESSION, then alter
-# COUNT by STEP and iterate if COUNT is not LAST.
-m4_define([_m4_for],
-[m4_define([$1], [$2])$5[]m4_if([$2], [$3], [],
- [$0([$1], m4_eval([$2 + $4]), [$3], [$4], [$5])])])
-
-
-# Implementing `foreach' loops in m4 is much more tricky than it may
-# seem. For example, the old M4 1.4.4 manual had an incorrect example,
-# which looked like this (when translated to m4sugar):
-#
-# | # foreach(VAR, (LIST), STMT)
-# | m4_define([foreach],
-# | [m4_pushdef([$1])_foreach([$1], [$2], [$3])m4_popdef([$1])])
-# | m4_define([_arg1], [$1])
-# | m4_define([_foreach],
-# | [m4_if([$2], [()], ,
-# | [m4_define([$1], _arg1$2)$3[]_foreach([$1], (m4_shift$2), [$3])])])
-#
-# But then if you run
-#
-# | m4_define(a, 1)
-# | m4_define(b, 2)
-# | m4_define(c, 3)
-# | foreach([f], [([a], [(b], [c)])], [echo f
-# | ])
-#
-# it gives
-#
-# => echo 1
-# => echo (2,3)
-#
-# which is not what is expected.
-#
-# Of course the problem is that many quotes are missing. So you add
-# plenty of quotes at random places, until you reach the expected
-# result. Alternatively, if you are a quoting wizard, you directly
-# reach the following implementation (but if you really did, then
-# apply to the maintenance of m4sugar!).
-#
-# | # foreach(VAR, (LIST), STMT)
-# | m4_define([foreach], [m4_pushdef([$1])_foreach($@)m4_popdef([$1])])
-# | m4_define([_arg1], [[$1]])
-# | m4_define([_foreach],
-# | [m4_if($2, [()], ,
-# | [m4_define([$1], [_arg1$2])$3[]_foreach([$1], [(m4_shift$2)], [$3])])])
-#
-# which this time answers
-#
-# => echo a
-# => echo (b
-# => echo c)
-#
-# Bingo!
-#
-# Well, not quite.
-#
-# With a better look, you realize that the parens are more a pain than
-# a help: since anyway you need to quote properly the list, you end up
-# with always using an outermost pair of parens and an outermost pair
-# of quotes. Rejecting the parens both eases the implementation, and
-# simplifies the use:
-#
-# | # foreach(VAR, (LIST), STMT)
-# | m4_define([foreach], [m4_pushdef([$1])_foreach($@)m4_popdef([$1])])
-# | m4_define([_arg1], [$1])
-# | m4_define([_foreach],
-# | [m4_if($2, [], ,
-# | [m4_define([$1], [_arg1($2)])$3[]_foreach([$1], [m4_shift($2)], [$3])])])
-#
-#
-# Now, just replace the `$2' with `m4_quote($2)' in the outer `m4_if'
-# to improve robustness, and you come up with a nice implementation
-# that doesn't require extra parentheses in the user's LIST.
-#
-# But wait - now the algorithm is quadratic, because every recursion of
-# the algorithm keeps the entire LIST and merely adds another m4_shift to
-# the quoted text. If the user has a lot of elements in LIST, you can
-# bring the system to its knees with the memory m4 then requires, or trip
-# the m4 --nesting-limit recursion factor. The only way to avoid
-# quadratic growth is ensure m4_shift is expanded prior to the recursion.
-# Hence the design below.
-#
-# The M4 manual now includes a chapter devoted to this issue, with
-# the lessons learned from m4sugar. And still, this design is only
-# optimal for M4 1.6; see foreach.m4 for yet more comments on why
-# M4 1.4.x uses yet another implementation.
-
-
-# m4_foreach(VARIABLE, LIST, EXPRESSION)
-# --------------------------------------
-#
-# Expand EXPRESSION assigning each value of the LIST to VARIABLE.
-# LIST should have the form `item_1, item_2, ..., item_n', i.e. the
-# whole list must *quoted*. Quote members too if you don't want them
-# to be expanded.
-#
-# This macro is robust to active symbols:
-# | m4_define(active, [ACT, IVE])
-# | m4_foreach(Var, [active, active], [-Var-])
-# => -ACT--IVE--ACT--IVE-
-#
-# | m4_foreach(Var, [[active], [active]], [-Var-])
-# => -ACT, IVE--ACT, IVE-
-#
-# | m4_foreach(Var, [[[active]], [[active]]], [-Var-])
-# => -active--active-
-#
-# This macro is called frequently, so avoid extra expansions such as
-# m4_ifval and dnl. Also, since $2 might be quite large, try to use it
-# as little as possible in _m4_foreach; each extra use requires that much
-# more memory for expansion. So, rather than directly compare $2 against
-# [] and use m4_car/m4_cdr for recursion, we instead unbox the list (which
-# requires swapping the argument order in the helper), insert an ignored
-# third argument, and use m4_shift3 to detect when recursion is complete.
-m4_define([m4_foreach],
-[m4_if([$2], [], [],
- [m4_pushdef([$1])_$0([$1], [$3], [], $2)m4_popdef([$1])])])
-
-m4_define([_m4_foreach],
-[m4_if([$#], [3], [],
- [m4_define([$1], [$4])$2[]$0([$1], [$2], m4_shift3($@))])])
-
-
-# m4_foreach_w(VARIABLE, LIST, EXPRESSION)
-# ----------------------------------------
-#
-# Like m4_foreach, but the list is whitespace separated.
-#
-# This macro is robust to active symbols:
-# m4_foreach_w([Var], [ active
-# b act\
-# ive ], [-Var-])end
-# => -active--b--active-end
-#
-m4_define([m4_foreach_w],
-[m4_foreach([$1], m4_split(m4_normalize([$2]), [ ]), [$3])])
-
-
-# m4_map(MACRO, LIST)
-# m4_mapall(MACRO, LIST)
-# ----------------------
-# Invoke MACRO($1), MACRO($2) etc. where $1, $2... are the elements of
-# LIST. $1, $2... must in turn be lists, appropriate for m4_apply.
-# If LIST contains an empty sublist, m4_map skips the expansion of
-# MACRO, while m4_mapall expands MACRO with no arguments.
-#
-# Since LIST may be quite large, we want to minimize how often it
-# appears in the expansion. Rather than use m4_car/m4_cdr iteration,
-# we unbox the list, ignore the second argument, and use m4_shift2 to
-# detect the end of recursion. The mismatch in () is intentional; see
-# _m4_map. For m4_map, an empty list behaves like an empty sublist
-# and gets ignored; for m4_mapall, we must special-case the empty
-# list.
-m4_define([m4_map],
-[_m4_map([_m4_apply([$1]], [], $2)])
-
-m4_define([m4_mapall],
-[m4_if([$2], [], [],
- [_m4_map([m4_apply([$1]], [], $2)])])
-
-
-# m4_map_sep(MACRO, SEPARATOR, LIST)
-# m4_mapall_sep(MACRO, SEPARATOR, LIST)
-# -------------------------------------
-# Invoke MACRO($1), SEPARATOR, MACRO($2), ..., MACRO($N) where $1,
-# $2... $N are the elements of LIST, and are in turn lists appropriate
-# for m4_apply. SEPARATOR is expanded, in order to allow the creation
-# of a list of arguments by using a single-quoted comma as the
-# separator. For each empty sublist, m4_map_sep skips the expansion
-# of MACRO and SEPARATOR, while m4_mapall_sep expands MACRO with no
-# arguments.
-#
-# For m4_mapall_sep, merely expand the first iteration without the
-# separator, then include separator as part of subsequent recursion.
-# For m4_map_sep, things are trickier - we don't know if the first
-# list element is an empty sublist, so we must define a self-modifying
-# helper macro and use that as the separator instead.
-m4_define([m4_map_sep],
-[m4_pushdef([m4_Sep], [m4_define([m4_Sep], _m4_defn([m4_unquote]))])]dnl
-[_m4_map([_m4_apply([m4_Sep([$2])[]$1]], [], $3)m4_popdef([m4_Sep])])
-
-m4_define([m4_mapall_sep],
-[m4_if([$3], [], [],
- [m4_apply([$1], m4_car($3))_m4_map([m4_apply([$2[]$1]], $3)])])
-
-# _m4_map(PREFIX, IGNORED, SUBLIST, ...)
-# --------------------------------------
-# Common implementation for all four m4_map variants. The mismatch in
-# the number of () is intentional. PREFIX must supply a form of
-# m4_apply, the open `(', and the MACRO to be applied. Each iteration
-# then appends `,', the current SUBLIST and the closing `)', then
-# recurses to the next SUBLIST. IGNORED is an aid to ending recursion
-# efficiently.
-m4_define([_m4_map],
-[m4_if([$#], [2], [],
- [$1, [$3])$0([$1], m4_shift2($@))])])
-
-# m4_transform(EXPRESSION, ARG...)
-# --------------------------------
-# Expand EXPRESSION([ARG]) for each argument. More efficient than
-# m4_foreach([var], [ARG...], [EXPRESSION(m4_defn([var]))])
-m4_define([m4_transform],
-[m4_if([$#], [0], [m4_fatal([$0: too few arguments: $#])],
- [$#], [1], [],
- [$#], [2], [$1([$2])[]],
- [$1([$2])[]$0([$1], m4_shift2($@))])])
-
-
-# m4_transform_pair(EXPRESSION, [END-EXPR = EXPRESSION], ARG...)
-# --------------------------------------------------------------
-# Perform a pairwise grouping of consecutive ARGs, by expanding
-# EXPRESSION([ARG1], [ARG2]). If there are an odd number of ARGs, the
-# final argument is expanded with END-EXPR([ARGn]).
-#
-# For example:
-# m4_define([show], [($*)m4_newline])dnl
-# m4_transform_pair([show], [], [a], [b], [c], [d], [e])dnl
-# => (a,b)
-# => (c,d)
-# => (e)
-m4_define([m4_transform_pair],
-[m4_if([$#], [0], [m4_fatal([$0: too few arguments: $#])],
- [$#], [1], [m4_fatal([$0: too few arguments: $#: $1])],
- [$#], [2], [],
- [$#], [3], [m4_default([$2], [$1])([$3])[]],
- [$#], [4], [$1([$3], [$4])[]],
- [$1([$3], [$4])[]$0([$1], [$2], m4_shift(m4_shift3($@)))])])
-
-
-## --------------------------- ##
-## 9. More diversion support. ##
-## --------------------------- ##
-
-
-# _m4_divert(DIVERSION-NAME or NUMBER)
-# ------------------------------------
-# If DIVERSION-NAME is the name of a diversion, return its number,
-# otherwise if it is a NUMBER return it.
-m4_define([_m4_divert],
-[m4_ifdef([_m4_divert($1)],
- [m4_indir([_m4_divert($1)])],
- [$1])])
-
-# KILL is only used to suppress output.
-m4_define([_m4_divert(KILL)], -1)
-
-# The empty diversion name is a synonym for 0.
-m4_define([_m4_divert()], 0)
-
-
-# _m4_divert_n_stack
-# ------------------
-# Print m4_divert_stack with newline prepended, if it's nonempty.
-m4_define([_m4_divert_n_stack],
-[m4_ifdef([m4_divert_stack], [
-_m4_defn([m4_divert_stack])])])
-
-
-# m4_divert(DIVERSION-NAME)
-# -------------------------
-# Change the diversion stream to DIVERSION-NAME.
-m4_define([m4_divert],
-[m4_define([m4_divert_stack], m4_location[: $0: $1]_m4_divert_n_stack)]dnl
-[m4_builtin([divert], _m4_divert([$1]))])
-
-
-# m4_divert_push(DIVERSION-NAME)
-# ------------------------------
-# Change the diversion stream to DIVERSION-NAME, while stacking old values.
-m4_define([m4_divert_push],
-[m4_pushdef([m4_divert_stack], m4_location[: $0: $1]_m4_divert_n_stack)]dnl
-[m4_pushdef([_m4_divert_diversion], [$1])]dnl
-[m4_builtin([divert], _m4_divert([$1]))])
-
-
-# m4_divert_pop([DIVERSION-NAME])
-# -------------------------------
-# Change the diversion stream to its previous value, unstacking it.
-# If specified, verify we left DIVERSION-NAME.
-# When we pop the last value from the stack, we divert to -1.
-m4_define([m4_divert_pop],
-[m4_ifndef([_m4_divert_diversion],
- [m4_fatal([too many m4_divert_pop])])]dnl
-[m4_if([$1], [], [],
- [$1], _m4_defn([_m4_divert_diversion]), [],
- [m4_fatal([$0($1): diversion mismatch: ]_m4_divert_n_stack)])]dnl
-[_m4_popdef([m4_divert_stack], [_m4_divert_diversion])]dnl
-[m4_builtin([divert],
- m4_ifdef([_m4_divert_diversion],
- [_m4_divert(_m4_defn([_m4_divert_diversion]))],
- -1))])
-
-
-# m4_divert_text(DIVERSION-NAME, CONTENT)
-# ---------------------------------------
-# Output CONTENT into DIVERSION-NAME (which may be a number actually).
-# An end of line is appended for free to CONTENT.
-m4_define([m4_divert_text],
-[m4_divert_push([$1])$2
-m4_divert_pop([$1])])
-
-
-# m4_divert_once(DIVERSION-NAME, CONTENT)
-# ---------------------------------------
-# Output CONTENT into DIVERSION-NAME once, if not already there.
-# An end of line is appended for free to CONTENT.
-m4_define([m4_divert_once],
-[m4_expand_once([m4_divert_text([$1], [$2])])])
-
-
-# m4_undivert(DIVERSION-NAME)
-# ---------------------------
-# Undivert DIVERSION-NAME. Unlike the M4 version, this only takes a single
-# diversion identifier, and should not be used to undivert files.
-m4_define([m4_undivert],
-[m4_builtin([undivert], _m4_divert([$1]))])
-
-
-## --------------------------------------------- ##
-## 10. Defining macros with bells and whistles. ##
-## --------------------------------------------- ##
-
-# `m4_defun' is basically `m4_define' but it equips the macro with the
-# needed machinery for `m4_require'. A macro must be m4_defun'd if
-# either it is m4_require'd, or it m4_require's.
-#
-# Two things deserve attention and are detailed below:
-# 1. Implementation of m4_require
-# 2. Keeping track of the expansion stack
-#
-# 1. Implementation of m4_require
-# ===============================
-#
-# Of course m4_defun AC_PROVIDE's the macro, so that a macro which has
-# been expanded is not expanded again when m4_require'd, but the
-# difficult part is the proper expansion of macros when they are
-# m4_require'd.
-#
-# The implementation is based on two ideas, (i) using diversions to
-# prepare the expansion of the macro and its dependencies (by Franc,ois
-# Pinard), and (ii) expand the most recently m4_require'd macros _after_
-# the previous macros (by Axel Thimm).
-#
-#
-# The first idea: why use diversions?
-# -----------------------------------
-#
-# When a macro requires another, the other macro is expanded in new
-# diversion, GROW. When the outer macro is fully expanded, we first
-# undivert the most nested diversions (GROW - 1...), and finally
-# undivert GROW. To understand why we need several diversions,
-# consider the following example:
-#
-# | m4_defun([TEST1], [Test...REQUIRE([TEST2])1])
-# | m4_defun([TEST2], [Test...REQUIRE([TEST3])2])
-# | m4_defun([TEST3], [Test...3])
-#
-# Because m4_require is not required to be first in the outer macros, we
-# must keep the expansions of the various levels of m4_require separated.
-# Right before executing the epilogue of TEST1, we have:
-#
-# GROW - 2: Test...3
-# GROW - 1: Test...2
-# GROW: Test...1
-# BODY:
-#
-# Finally the epilogue of TEST1 undiverts GROW - 2, GROW - 1, and
-# GROW into the regular flow, BODY.
-#
-# GROW - 2:
-# GROW - 1:
-# GROW:
-# BODY: Test...3; Test...2; Test...1
-#
-# (The semicolons are here for clarification, but of course are not
-# emitted.) This is what Autoconf 2.0 (I think) to 2.13 (I'm sure)
-# implement.
-#
-#
-# The second idea: first required first out
-# -----------------------------------------
-#
-# The natural implementation of the idea above is buggy and produces
-# very surprising results in some situations. Let's consider the
-# following example to explain the bug:
-#
-# | m4_defun([TEST1], [REQUIRE([TEST2a])REQUIRE([TEST2b])])
-# | m4_defun([TEST2a], [])
-# | m4_defun([TEST2b], [REQUIRE([TEST3])])
-# | m4_defun([TEST3], [REQUIRE([TEST2a])])
-# |
-# | AC_INIT
-# | TEST1
-#
-# The dependencies between the macros are:
-#
-# 3 --- 2b
-# / \ is m4_require'd by
-# / \ left -------------------- right
-# 2a ------------ 1
-#
-# If you strictly apply the rules given in the previous section you get:
-#
-# GROW - 2: TEST3
-# GROW - 1: TEST2a; TEST2b
-# GROW: TEST1
-# BODY:
-#
-# (TEST2a, although required by TEST3 is not expanded in GROW - 3
-# because is has already been expanded before in GROW - 1, so it has
-# been AC_PROVIDE'd, so it is not expanded again) so when you undivert
-# the stack of diversions, you get:
-#
-# GROW - 2:
-# GROW - 1:
-# GROW:
-# BODY: TEST3; TEST2a; TEST2b; TEST1
-#
-# i.e., TEST2a is expanded after TEST3 although the latter required the
-# former.
-#
-# Starting from 2.50, we use an implementation provided by Axel Thimm.
-# The idea is simple: the order in which macros are emitted must be the
-# same as the one in which macros are expanded. (The bug above can
-# indeed be described as: a macro has been AC_PROVIDE'd before its
-# dependent, but it is emitted after: the lack of correlation between
-# emission and expansion order is guilty).
-#
-# How to do that? You keep the stack of diversions to elaborate the
-# macros, but each time a macro is fully expanded, emit it immediately.
-#
-# In the example above, when TEST2a is expanded, but it's epilogue is
-# not run yet, you have:
-#
-# GROW - 2:
-# GROW - 1: TEST2a
-# GROW: Elaboration of TEST1
-# BODY:
-#
-# The epilogue of TEST2a emits it immediately:
-#
-# GROW - 2:
-# GROW - 1:
-# GROW: Elaboration of TEST1
-# BODY: TEST2a
-#
-# TEST2b then requires TEST3, so right before the epilogue of TEST3, you
-# have:
-#
-# GROW - 2: TEST3
-# GROW - 1: Elaboration of TEST2b
-# GROW: Elaboration of TEST1
-# BODY: TEST2a
-#
-# The epilogue of TEST3 emits it:
-#
-# GROW - 2:
-# GROW - 1: Elaboration of TEST2b
-# GROW: Elaboration of TEST1
-# BODY: TEST2a; TEST3
-#
-# TEST2b is now completely expanded, and emitted:
-#
-# GROW - 2:
-# GROW - 1:
-# GROW: Elaboration of TEST1
-# BODY: TEST2a; TEST3; TEST2b
-#
-# and finally, TEST1 is finished and emitted:
-#
-# GROW - 2:
-# GROW - 1:
-# GROW:
-# BODY: TEST2a; TEST3; TEST2b: TEST1
-#
-# The idea is simple, but the implementation is a bit evolved. If you
-# are like me, you will want to see the actual functioning of this
-# implementation to be convinced. The next section gives the full
-# details.
-#
-#
-# The Axel Thimm implementation at work
-# -------------------------------------
-#
-# We consider the macros above, and this configure.ac:
-#
-# AC_INIT
-# TEST1
-#
-# You should keep the definitions of _m4_defun_pro, _m4_defun_epi, and
-# m4_require at hand to follow the steps.
-#
-# This implements tries not to assume that the current diversion is
-# BODY, so as soon as a macro (m4_defun'd) is expanded, we first
-# record the current diversion under the name _m4_divert_dump (denoted
-# DUMP below for short). This introduces an important difference with
-# the previous versions of Autoconf: you cannot use m4_require if you
-# are not inside an m4_defun'd macro, and especially, you cannot
-# m4_require directly from the top level.
-#
-# We have not tried to simulate the old behavior (better yet, we
-# diagnose it), because it is too dangerous: a macro m4_require'd from
-# the top level is expanded before the body of `configure', i.e., before
-# any other test was run. I let you imagine the result of requiring
-# AC_STDC_HEADERS for instance, before AC_PROG_CC was actually run....
-#
-# After AC_INIT was run, the current diversion is BODY.
-# * AC_INIT was run
-# DUMP: undefined
-# diversion stack: BODY |-
-#
-# * TEST1 is expanded
-# The prologue of TEST1 sets _m4_divert_dump, which is the diversion
-# where the current elaboration will be dumped, to the current
-# diversion. It also m4_divert_push to GROW, where the full
-# expansion of TEST1 and its dependencies will be elaborated.
-# DUMP: BODY
-# BODY: empty
-# diversions: GROW, BODY |-
-#
-# * TEST1 requires TEST2a
-# _m4_require_call m4_divert_pushes another temporary diversion,
-# GROW - 1, and expands TEST2a in there.
-# DUMP: BODY
-# BODY: empty
-# GROW - 1: TEST2a
-# diversions: GROW - 1, GROW, BODY |-
-# Than the content of the temporary diversion is moved to DUMP and the
-# temporary diversion is popped.
-# DUMP: BODY
-# BODY: TEST2a
-# diversions: GROW, BODY |-
-#
-# * TEST1 requires TEST2b
-# Again, _m4_require_call pushes GROW - 1 and heads to expand TEST2b.
-# DUMP: BODY
-# BODY: TEST2a
-# diversions: GROW - 1, GROW, BODY |-
-#
-# * TEST2b requires TEST3
-# _m4_require_call pushes GROW - 2 and expands TEST3 here.
-# (TEST3 requires TEST2a, but TEST2a has already been m4_provide'd, so
-# nothing happens.)
-# DUMP: BODY
-# BODY: TEST2a
-# GROW - 2: TEST3
-# diversions: GROW - 2, GROW - 1, GROW, BODY |-
-# Than the diversion is appended to DUMP, and popped.
-# DUMP: BODY
-# BODY: TEST2a; TEST3
-# diversions: GROW - 1, GROW, BODY |-
-#
-# * TEST1 requires TEST2b (contd.)
-# The content of TEST2b is expanded...
-# DUMP: BODY
-# BODY: TEST2a; TEST3
-# GROW - 1: TEST2b,
-# diversions: GROW - 1, GROW, BODY |-
-# ... and moved to DUMP.
-# DUMP: BODY
-# BODY: TEST2a; TEST3; TEST2b
-# diversions: GROW, BODY |-
-#
-# * TEST1 is expanded: epilogue
-# TEST1's own content is in GROW...
-# DUMP: BODY
-# BODY: TEST2a; TEST3; TEST2b
-# GROW: TEST1
-# diversions: BODY |-
-# ... and it's epilogue moves it to DUMP and then undefines DUMP.
-# DUMP: undefined
-# BODY: TEST2a; TEST3; TEST2b; TEST1
-# diversions: BODY |-
-#
-#
-# 2. Keeping track of the expansion stack
-# =======================================
-#
-# When M4 expansion goes wrong it is often extremely hard to find the
-# path amongst macros that drove to the failure. What is needed is
-# the stack of macro `calls'. One could imagine that GNU M4 would
-# maintain a stack of macro expansions, unfortunately it doesn't, so
-# we do it by hand. This is of course extremely costly, but the help
-# this stack provides is worth it. Nevertheless to limit the
-# performance penalty this is implemented only for m4_defun'd macros,
-# not for define'd macros.
-#
-# The scheme is simplistic: each time we enter an m4_defun'd macros,
-# we prepend its name in m4_expansion_stack, and when we exit the
-# macro, we remove it (thanks to pushdef/popdef).
-#
-# In addition, we want to detect circular m4_require dependencies.
-# Each time we expand a macro FOO we define _m4_expanding(FOO); and
-# m4_require(BAR) simply checks whether _m4_expanding(BAR) is defined.
-
-
-# m4_expansion_stack_push(TEXT)
-# -----------------------------
-m4_define([m4_expansion_stack_push],
-[m4_pushdef([m4_expansion_stack],
- [$1]m4_ifdef([m4_expansion_stack], [
-_m4_defn([m4_expansion_stack])]))])
-
-
-# m4_expansion_stack_pop
-# ----------------------
-m4_define([m4_expansion_stack_pop],
-[m4_popdef([m4_expansion_stack])])
-
-
-# m4_expansion_stack_dump
-# -----------------------
-# Dump the expansion stack.
-m4_define([m4_expansion_stack_dump],
-[m4_ifdef([m4_expansion_stack],
- [m4_errprintn(_m4_defn([m4_expansion_stack]))])dnl
-m4_errprintn(m4_location[: the top level])])
-
-
-# _m4_divert(GROW)
-# ----------------
-# This diversion is used by the m4_defun/m4_require machinery. It is
-# important to keep room before GROW because for each nested
-# AC_REQUIRE we use an additional diversion (i.e., two m4_require's
-# will use GROW - 2. More than 3 levels has never seemed to be
-# needed.)
-#
-# ...
-# - GROW - 2
-# m4_require'd code, 2 level deep
-# - GROW - 1
-# m4_require'd code, 1 level deep
-# - GROW
-# m4_defun'd macros are elaborated here.
-
-m4_define([_m4_divert(GROW)], 10000)
-
-
-# _m4_defun_pro(MACRO-NAME)
-# -------------------------
-# The prologue for Autoconf macros.
-#
-# This is called frequently, so minimize the number of macro invocations
-# by avoiding dnl and m4_defn overhead.
-m4_define([_m4_defun_pro],
-m4_do([[m4_ifdef([m4_expansion_stack], [], [_m4_defun_pro_outer[]])]],
- [[m4_expansion_stack_push(_m4_defn(
- [m4_location($1)])[: $1 is expanded from...])]],
- [[m4_pushdef([_m4_expanding($1)])]]))
-
-m4_define([_m4_defun_pro_outer],
-[m4_copy([_m4_divert_diversion], [_m4_divert_dump])m4_divert_push([GROW])])
-
-# _m4_defun_epi(MACRO-NAME)
-# -------------------------
-# The Epilogue for Autoconf macros. MACRO-NAME only helps tracing
-# the PRO/EPI pairs.
-#
-# This is called frequently, so minimize the number of macro invocations
-# by avoiding dnl and m4_popdef overhead.
-m4_define([_m4_defun_epi],
-m4_do([[_m4_popdef([_m4_expanding($1)])]],
- [[m4_expansion_stack_pop()]],
- [[m4_ifdef([m4_expansion_stack], [], [_m4_defun_epi_outer[]])]],
- [[m4_provide([$1])]]))
-
-m4_define([_m4_defun_epi_outer],
-[_m4_undefine([_m4_divert_dump])m4_divert_pop([GROW])m4_undivert([GROW])])
-
-
-# m4_defun(NAME, EXPANSION)
-# -------------------------
-# Define a macro which automatically provides itself. Add machinery
-# so the macro automatically switches expansion to the diversion
-# stack if it is not already using it. In this case, once finished,
-# it will bring back all the code accumulated in the diversion stack.
-# This, combined with m4_require, achieves the topological ordering of
-# macros. We don't use this macro to define some frequently called
-# macros that are not involved in ordering constraints, to save m4
-# processing.
-m4_define([m4_defun],
-[m4_define([m4_location($1)], m4_location)dnl
-m4_define([$1],
- [_m4_defun_pro([$1])$2[]_m4_defun_epi([$1])])])
-
-
-# m4_defun_once(NAME, EXPANSION)
-# ------------------------------
-# As m4_defun, but issues the EXPANSION only once, and warns if used
-# several times.
-m4_define([m4_defun_once],
-[m4_define([m4_location($1)], m4_location)dnl
-m4_define([$1],
- [m4_provide_if([$1],
- [m4_warn([syntax], [$1 invoked multiple times])],
- [_m4_defun_pro([$1])$2[]_m4_defun_epi([$1])])])])
-
-
-# m4_pattern_forbid(ERE, [WHY])
-# -----------------------------
-# Declare that no token matching the forbidden extended regular
-# expression ERE should be seen in the output unless...
-m4_define([m4_pattern_forbid], [])
-
-
-# m4_pattern_allow(ERE)
-# ---------------------
-# ... that token also matches the allowed extended regular expression ERE.
-# Both used via traces.
-m4_define([m4_pattern_allow], [])
-
-
-## --------------------------------- ##
-## 11. Dependencies between macros. ##
-## --------------------------------- ##
-
-
-# m4_before(THIS-MACRO-NAME, CALLED-MACRO-NAME)
-# ---------------------------------------------
-# Issue a warning if CALLED-MACRO-NAME was called before THIS-MACRO-NAME.
-m4_define([m4_before],
-[m4_provide_if([$2],
- [m4_warn([syntax], [$2 was called before $1])])])
-
-
-# m4_require(NAME-TO-CHECK, [BODY-TO-EXPAND = NAME-TO-CHECK])
-# -----------------------------------------------------------
-# If NAME-TO-CHECK has never been expanded (actually, if it is not
-# m4_provide'd), expand BODY-TO-EXPAND *before* the current macro
-# expansion. Once expanded, emit it in _m4_divert_dump. Keep track
-# of the m4_require chain in m4_expansion_stack.
-#
-# The normal cases are:
-#
-# - NAME-TO-CHECK == BODY-TO-EXPAND
-# Which you can use for regular macros with or without arguments, e.g.,
-# m4_require([AC_PROG_CC], [AC_PROG_CC])
-# m4_require([AC_CHECK_HEADERS(limits.h)], [AC_CHECK_HEADERS(limits.h)])
-# which is just the same as
-# m4_require([AC_PROG_CC])
-# m4_require([AC_CHECK_HEADERS(limits.h)])
-#
-# - BODY-TO-EXPAND == m4_indir([NAME-TO-CHECK])
-# In the case of macros with irregular names. For instance:
-# m4_require([AC_LANG_COMPILER(C)], [indir([AC_LANG_COMPILER(C)])])
-# which means `if the macro named `AC_LANG_COMPILER(C)' (the parens are
-# part of the name, it is not an argument) has not been run, then
-# call it.'
-# Had you used
-# m4_require([AC_LANG_COMPILER(C)], [AC_LANG_COMPILER(C)])
-# then m4_require would have tried to expand `AC_LANG_COMPILER(C)', i.e.,
-# call the macro `AC_LANG_COMPILER' with `C' as argument.
-#
-# You could argue that `AC_LANG_COMPILER', when it receives an argument
-# such as `C' should dispatch the call to `AC_LANG_COMPILER(C)'. But this
-# `extension' prevents `AC_LANG_COMPILER' from having actual arguments that
-# it passes to `AC_LANG_COMPILER(C)'.
-#
-# This is called frequently, so minimize the number of macro invocations
-# by avoiding dnl and other overhead on the common path.
-m4_define([m4_require],
-m4_do([[m4_ifdef([_m4_expanding($1)],
- [m4_fatal([$0: circular dependency of $1])])]],
- [[m4_ifdef([_m4_divert_dump], [],
- [m4_fatal([$0($1): cannot be used outside of an ]dnl
-m4_bmatch([$0], [^AC_], [[AC_DEFUN]], [[m4_defun]])['d macro])])]],
- [[m4_provide_if([$1],
- [],
- [_m4_require_call([$1], [$2])])]]))
-
-
-# _m4_require_call(NAME-TO-CHECK, [BODY-TO-EXPAND = NAME-TO-CHECK])
-# -----------------------------------------------------------------
-# If m4_require decides to expand the body, it calls this macro.
-#
-# This is called frequently, so minimize the number of macro invocations
-# by avoiding dnl and other overhead on the common path.
-m4_define([_m4_require_call],
-m4_do([[m4_define([_m4_divert_grow], m4_decr(_m4_divert_grow))]],
- [[m4_divert_push(_m4_divert_grow)]],
- [[m4_default([$2], [$1])
-m4_provide_if([$1],
- [],
- [m4_warn([syntax],
- [$1 is m4_require'd but not m4_defun'd])])]],
- [[m4_divert(_m4_defn([_m4_divert_dump]))]],
- [[m4_undivert(_m4_divert_grow)]],
- [[m4_divert_pop(_m4_divert_grow)]],
- [[m4_define([_m4_divert_grow], m4_incr(_m4_divert_grow))]]))
-
-
-# _m4_divert_grow
-# ---------------
-# The counter for _m4_require_call.
-m4_define([_m4_divert_grow], _m4_divert([GROW]))
-
-
-# m4_expand_once(TEXT, [WITNESS = TEXT])
-# --------------------------------------
-# If TEXT has never been expanded, expand it *here*. Use WITNESS as
-# as a memory that TEXT has already been expanded.
-m4_define([m4_expand_once],
-[m4_provide_if(m4_ifval([$2], [[$2]], [[$1]]),
- [],
- [m4_provide(m4_ifval([$2], [[$2]], [[$1]]))[]$1])])
-
-
-# m4_provide(MACRO-NAME)
-# ----------------------
-m4_define([m4_provide],
-[m4_define([m4_provide($1)])])
-
-
-# m4_provide_if(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
-# -------------------------------------------------------
-# If MACRO-NAME is provided do IF-PROVIDED, else IF-NOT-PROVIDED.
-# The purpose of this macro is to provide the user with a means to
-# check macros which are provided without letting her know how the
-# information is coded.
-m4_define([m4_provide_if],
-[m4_ifdef([m4_provide($1)],
- [$2], [$3])])
-
-
-## --------------------- ##
-## 12. Text processing. ##
-## --------------------- ##
-
-
-# m4_cr_letters
-# m4_cr_LETTERS
-# m4_cr_Letters
-# -------------
-m4_define([m4_cr_letters], [abcdefghijklmnopqrstuvwxyz])
-m4_define([m4_cr_LETTERS], [ABCDEFGHIJKLMNOPQRSTUVWXYZ])
-m4_define([m4_cr_Letters],
-m4_defn([m4_cr_letters])dnl
-m4_defn([m4_cr_LETTERS])dnl
-)
-
-
-# m4_cr_digits
-# ------------
-m4_define([m4_cr_digits], [0123456789])
-
-
-# m4_cr_alnum
-# -----------
-m4_define([m4_cr_alnum],
-m4_defn([m4_cr_Letters])dnl
-m4_defn([m4_cr_digits])dnl
-)
-
-
-# m4_cr_symbols1
-# m4_cr_symbols2
-# -------------------------------
-m4_define([m4_cr_symbols1],
-m4_defn([m4_cr_Letters])dnl
-_)
-
-m4_define([m4_cr_symbols2],
-m4_defn([m4_cr_symbols1])dnl
-m4_defn([m4_cr_digits])dnl
-)
-
-# m4_cr_all
-# ---------
-# The character range representing everything, with `-' as the last
-# character, since it is special to m4_translit. Use with care, because
-# it contains characters special to M4 (fortunately, both ASCII and EBCDIC
-# have [] in order, so m4_defn([m4_cr_all]) remains a valid string). It
-# also contains characters special to terminals, so it should never be
-# displayed in an error message. Also, attempts to map [ and ] to other
-# characters via m4_translit must deal with the fact that m4_translit does
-# not add quotes to the output.
-#
-# It is mainly useful in generating inverted character range maps, for use
-# in places where m4_translit is faster than an equivalent m4_bpatsubst;
-# the regex `[^a-z]' is equivalent to:
-# m4_translit(m4_dquote(m4_defn([m4_cr_all])), [a-z])
-m4_define([m4_cr_all],
-m4_translit(m4_dquote(m4_format(m4_dquote(m4_for(
- ,1,255,,[[%c]]))m4_for([i],1,255,,[,i]))), [-])-)
-
-
-# _m4_define_cr_not(CATEGORY)
-# ---------------------------
-# Define m4_cr_not_CATEGORY as the inverse of m4_cr_CATEGORY.
-m4_define([_m4_define_cr_not],
-[m4_define([m4_cr_not_$1],
- m4_translit(m4_dquote(m4_defn([m4_cr_all])),
- m4_defn([m4_cr_$1])))])
-
-
-# m4_cr_not_letters
-# m4_cr_not_LETTERS
-# m4_cr_not_Letters
-# m4_cr_not_digits
-# m4_cr_not_alnum
-# m4_cr_not_symbols1
-# m4_cr_not_symbols2
-# ------------------
-# Inverse character sets
-_m4_define_cr_not([letters])
-_m4_define_cr_not([LETTERS])
-_m4_define_cr_not([Letters])
-_m4_define_cr_not([digits])
-_m4_define_cr_not([alnum])
-_m4_define_cr_not([symbols1])
-_m4_define_cr_not([symbols2])
-
-
-# m4_newline
-# ----------
-# Expands to a newline. Exists for formatting reasons.
-m4_define([m4_newline], [
-])
-
-
-# m4_re_escape(STRING)
-# --------------------
-# Escape RE active characters in STRING.
-m4_define([m4_re_escape],
-[m4_bpatsubst([$1],
- [[][*+.?\^$]], [\\\&])])
-
-
-# m4_re_string
-# ------------
-# Regexp for `[a-zA-Z_0-9]*'
-# m4_dquote provides literal [] for the character class.
-m4_define([m4_re_string],
-m4_dquote(m4_defn([m4_cr_symbols2]))dnl
-[*]dnl
-)
-
-
-# m4_re_word
-# ----------
-# Regexp for `[a-zA-Z_][a-zA-Z_0-9]*'
-m4_define([m4_re_word],
-m4_dquote(m4_defn([m4_cr_symbols1]))dnl
-m4_defn([m4_re_string])dnl
-)
-
-
-# m4_tolower(STRING)
-# m4_toupper(STRING)
-# ------------------
-# These macros convert STRING to lowercase or uppercase.
-#
-# Rather than expand the m4_defn each time, we inline them up front.
-m4_define([m4_tolower],
-[m4_translit([$1], ]m4_dquote(m4_defn([m4_cr_LETTERS]))[,
- ]m4_dquote(m4_defn([m4_cr_letters]))[)])
-m4_define([m4_toupper],
-[m4_translit([$1], ]m4_dquote(m4_defn([m4_cr_letters]))[,
- ]m4_dquote(m4_defn([m4_cr_LETTERS]))[)])
-
-
-# m4_split(STRING, [REGEXP])
-# --------------------------
-#
-# Split STRING into an m4 list of quoted elements. The elements are
-# quoted with [ and ]. Beginning spaces and end spaces *are kept*.
-# Use m4_strip to remove them.
-#
-# REGEXP specifies where to split. Default is [\t ]+.
-#
-# If STRING is empty, the result is an empty list.
-#
-# Pay attention to the m4_changequotes. When m4 reads the definition of
-# m4_split, it still has quotes set to [ and ]. Luckily, these are matched
-# in the macro body, so the definition is stored correctly. Use the same
-# alternate quotes as m4_noquote; it must be unlikely to appear in $1.
-#
-# Also, notice that $1 is quoted twice, since we want the result to
-# be quoted. Then you should understand that the argument of
-# patsubst is -=<{(STRING)}>=- (i.e., with additional -=<{( and )}>=-).
-#
-# This macro is safe on active symbols, i.e.:
-# m4_define(active, ACTIVE)
-# m4_split([active active ])end
-# => [active], [active], []end
-#
-# Optimize on regex of ` ' (space), since m4_foreach_w already guarantees
-# that the list contains single space separators, and a common case is
-# splitting a single-element list. This macro is called frequently,
-# so avoid unnecessary dnl inside the definition.
-m4_define([m4_split],
-[m4_if([$1], [], [],
- [$2], [ ], [m4_if(m4_index([$1], [ ]), [-1], [[[$1]]], [_$0($@)])],
- [$2], [], [_$0([$1], [[ ]+])],
- [_$0($@)])])
-
-m4_define([_m4_split],
-[m4_changequote([-=<{(],[)}>=-])]dnl
-[[m4_bpatsubst(-=<{(-=<{($1)}>=-)}>=-, -=<{($2)}>=-,
- -=<{(], [)}>=-)]m4_changequote([, ])])
-
-
-
-# m4_flatten(STRING)
-# ------------------
-# If STRING contains end of lines, replace them with spaces. If there
-# are backslashed end of lines, remove them. This macro is safe with
-# active symbols.
-# m4_define(active, ACTIVE)
-# m4_flatten([active
-# act\
-# ive])end
-# => active activeend
-#
-# In m4, m4_bpatsubst is expensive, so first check for a newline.
-m4_define([m4_flatten],
-[m4_if(m4_index([$1], [
-]), [-1], [[$1]],
- [m4_translit(m4_bpatsubst([[[$1]]], [\\
-]), [
-], [ ])])])
-
-
-# m4_strip(STRING)
-# ----------------
-# Expands into STRING with tabs and spaces singled out into a single
-# space, and removing leading and trailing spaces.
-#
-# This macro is robust to active symbols.
-# m4_define(active, ACTIVE)
-# m4_strip([ active <tab> <tab>active ])end
-# => active activeend
-#
-# First, notice that we guarantee trailing space. Why? Because regular
-# expressions are greedy, and `.* ?' would always group the space into the
-# .* portion. The algorithm is simpler by avoiding `?' at the end. The
-# algorithm correctly strips everything if STRING is just ` '.
-#
-# Then notice the second pattern: it is in charge of removing the
-# leading/trailing spaces. Why not just `[^ ]'? Because they are
-# applied to over-quoted strings, i.e. more or less [STRING], due
-# to the limitations of m4_bpatsubsts. So the leading space in STRING
-# is the *second* character; equally for the trailing space.
-m4_define([m4_strip],
-[m4_bpatsubsts([$1 ],
- [[ ]+], [ ],
- [^. ?\(.*\) .$], [[[\1]]])])
-
-
-# m4_normalize(STRING)
-# --------------------
-# Apply m4_flatten and m4_strip to STRING.
-#
-# The argument is quoted, so that the macro is robust to active symbols:
-#
-# m4_define(active, ACTIVE)
-# m4_normalize([ act\
-# ive
-# active ])end
-# => active activeend
-
-m4_define([m4_normalize],
-[m4_strip(m4_flatten([$1]))])
-
-
-
-# m4_join(SEP, ARG1, ARG2...)
-# ---------------------------
-# Produce ARG1SEPARG2...SEPARGn. Avoid back-to-back SEP when a given ARG
-# is the empty string. No expansion is performed on SEP or ARGs.
-#
-# Since the number of arguments to join can be arbitrarily long, we
-# want to avoid having more than one $@ in the macro definition;
-# otherwise, the expansion would require twice the memory of the already
-# long list. Hence, m4_join merely looks for the first non-empty element,
-# and outputs just that element; while _m4_join looks for all non-empty
-# elements, and outputs them following a separator. The final trick to
-# note is that we decide between recursing with $0 or _$0 based on the
-# nested m4_if ending with `_'.
-m4_define([m4_join],
-[m4_if([$#], [1], [],
- [$#], [2], [[$2]],
- [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift2($@))])])
-m4_define([_m4_join],
-[m4_if([$#$2], [2], [],
- [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift2($@))])])
-
-# m4_joinall(SEP, ARG1, ARG2...)
-# ------------------------------
-# Produce ARG1SEPARG2...SEPARGn. An empty ARG results in back-to-back SEP.
-# No expansion is performed on SEP or ARGs.
-m4_define([m4_joinall], [[$2]_$0([$1], m4_shift($@))])
-m4_define([_m4_joinall],
-[m4_if([$#], [2], [], [[$1$3]$0([$1], m4_shift2($@))])])
-
-# m4_combine([SEPARATOR], PREFIX-LIST, [INFIX], SUFFIX...)
-# --------------------------------------------------------
-# Produce the pairwise combination of every element in the quoted,
-# comma-separated PREFIX-LIST with every element from the SUFFIX arguments.
-# Each pair is joined with INFIX, and pairs are separated by SEPARATOR.
-# No expansion occurs on SEPARATOR, INFIX, or elements of either list.
-#
-# For example:
-# m4_combine([, ], [[a], [b], [c]], [-], [1], [2], [3])
-# => a-1, a-2, a-3, b-1, b-2, b-3, c-1, c-2, c-3
-#
-# In order to have the correct number of SEPARATORs, we use a temporary
-# variable that redefines itself after the first use. We must use defn
-# rather than overquoting in case PREFIX or SUFFIX contains $1, but use
-# _m4_defn for speed. Likewise, we compute the m4_shift3 only once,
-# rather than in each iteration of the outer m4_foreach.
-m4_define([m4_combine],
-[m4_if(m4_eval([$# > 3]), [1],
- [m4_pushdef([m4_Separator], [m4_define([m4_Separator],
- _m4_defn([m4_echo]))])]]dnl
-[[m4_foreach([m4_Prefix], [$2],
- [m4_foreach([m4_Suffix], ]m4_dquote(m4_dquote(m4_shift3($@)))[,
- [m4_Separator([$1])[]_m4_defn([m4_Prefix])[$3]_m4_defn(
- [m4_Suffix])])])]]dnl
-[[_m4_popdef([m4_Separator])])])
-
-
-# m4_append(MACRO-NAME, STRING, [SEPARATOR])
-# ------------------------------------------
-# Redefine MACRO-NAME to hold its former content plus `SEPARATOR`'STRING'
-# at the end. It is valid to use this macro with MACRO-NAME undefined,
-# in which case no SEPARATOR is added. Be aware that the criterion is
-# `not being defined', and not `not being empty'.
-#
-# Note that neither STRING nor SEPARATOR are expanded here; rather, when
-# you expand MACRO-NAME, they will be expanded at that point in time.
-#
-# This macro is robust to active symbols. It can be used to grow
-# strings.
-#
-# | m4_define(active, ACTIVE)dnl
-# | m4_append([sentence], [This is an])dnl
-# | m4_append([sentence], [ active ])dnl
-# | m4_append([sentence], [symbol.])dnl
-# | sentence
-# | m4_undefine([active])dnl
-# | sentence
-# => This is an ACTIVE symbol.
-# => This is an active symbol.
-#
-# It can be used to define hooks.
-#
-# | m4_define(active, ACTIVE)dnl
-# | m4_append([hooks], [m4_define([act1], [act2])])dnl
-# | m4_append([hooks], [m4_define([act2], [active])])dnl
-# | m4_undefine([active])dnl
-# | act1
-# | hooks
-# | act1
-# => act1
-# =>
-# => active
-#
-# It can also be used to create lists, although this particular usage was
-# broken prior to autoconf 2.62.
-# | m4_append([list], [one], [, ])dnl
-# | m4_append([list], [two], [, ])dnl
-# | m4_append([list], [three], [, ])dnl
-# | list
-# | m4_dquote(list)
-# => one, two, three
-# => [one],[two],[three]
-#
-# Note that m4_append can benefit from amortized O(n) m4 behavior, if
-# the underlying m4 implementation is smart enough to avoid copying existing
-# contents when enlarging a macro's definition into any pre-allocated storage
-# (m4 1.4.x unfortunately does not implement this optimization). We do
-# not implement m4_prepend, since it is inherently O(n^2) (pre-allocated
-# storage only occurs at the end of a macro, so the existing contents must
-# always be moved).
-#
-# Use _m4_defn for speed.
-m4_define([m4_append],
-[m4_define([$1], m4_ifdef([$1], [_m4_defn([$1])[$3]])[$2])])
-
-
-# m4_append_uniq(MACRO-NAME, STRING, [SEPARATOR], [IF-UNIQ], [IF-DUP])
-# --------------------------------------------------------------------
-# Like `m4_append', but append only if not yet present. Additionally,
-# expand IF-UNIQ if STRING was appended, or IF-DUP if STRING was already
-# present. Also, warn if SEPARATOR is not empty and occurs within STRING,
-# as the algorithm no longer guarantees uniqueness.
-#
-# Note that while m4_append can be O(n) (depending on the quality of the
-# underlying M4 implementation), m4_append_uniq is inherently O(n^2)
-# because each append operation searches the entire string.
-m4_define([m4_append_uniq],
-[m4_ifval([$3], [m4_if(m4_index([$2], [$3]), [-1], [],
- [m4_warn([syntax],
- [$0: `$2' contains `$3'])])])_$0($@)])
-m4_define([_m4_append_uniq],
-[m4_ifdef([$1],
- [m4_if(m4_index([$3]_m4_defn([$1])[$3], [$3$2$3]), [-1],
- [m4_append([$1], [$2], [$3])$4], [$5])],
- [m4_define([$1], [$2])$4])])
-
-# m4_append_uniq_w(MACRO-NAME, STRINGS)
-# -------------------------------------
-# For each of the words in the whitespace separated list STRINGS, append
-# only the unique strings to the definition of MACRO-NAME.
-#
-# Use _m4_defn for speed.
-m4_define([m4_append_uniq_w],
-[m4_foreach_w([m4_Word], [$2],
- [_m4_append_uniq([$1], _m4_defn([m4_Word]), [ ])])])
-
-
-# m4_text_wrap(STRING, [PREFIX], [FIRST-PREFIX], [WIDTH])
-# -------------------------------------------------------
-# Expands into STRING wrapped to hold in WIDTH columns (default = 79).
-# If PREFIX is given, each line is prefixed with it. If FIRST-PREFIX is
-# specified, then the first line is prefixed with it. As a special case,
-# if the length of FIRST-PREFIX is greater than that of PREFIX, then
-# FIRST-PREFIX will be left alone on the first line.
-#
-# No expansion occurs on the contents STRING, PREFIX, or FIRST-PREFIX,
-# although quadrigraphs are correctly recognized.
-#
-# Typical outputs are:
-#
-# m4_text_wrap([Short string */], [ ], [/* ], 20)
-# => /* Short string */
-#
-# m4_text_wrap([Much longer string */], [ ], [/* ], 20)
-# => /* Much longer
-# => string */
-#
-# m4_text_wrap([Short doc.], [ ], [ --short ], 30)
-# => --short Short doc.
-#
-# m4_text_wrap([Short doc.], [ ], [ --too-wide ], 30)
-# => --too-wide
-# => Short doc.
-#
-# m4_text_wrap([Super long documentation.], [ ], [ --too-wide ], 30)
-# => --too-wide
-# => Super long
-# => documentation.
-#
-# FIXME: there is no checking of a longer PREFIX than WIDTH, but do
-# we really want to bother with people trying each single corner
-# of a software?
-#
-# This macro does not leave a trailing space behind the last word of a line,
-# which complicates it a bit. The algorithm is otherwise stupid and simple:
-# all the words are preceded by m4_Separator which is defined to empty for
-# the first word, and then ` ' (single space) for all the others.
-#
-# The algorithm uses a helper that uses $2 through $4 directly, rather than
-# using local variables, to avoid m4_defn overhead, or expansion swallowing
-# any $. It also bypasses m4_popdef overhead with _m4_popdef since no user
-# macro expansion occurs in the meantime. Also, the definition is written
-# with m4_do, to avoid time wasted on dnl during expansion (since this is
-# already a time-consuming macro).
-m4_define([m4_text_wrap],
-[_$0([$1], [$2], m4_if([$3], [], [[$2]], [[$3]]),
- m4_if([$4], [], [79], [[$4]]))])
-m4_define([_m4_text_wrap],
-m4_do(dnl set up local variables, to avoid repeated calculations
-[[m4_pushdef([m4_Indent], m4_qlen([$2]))]],
-[[m4_pushdef([m4_Cursor], m4_qlen([$3]))]],
-[[m4_pushdef([m4_Separator], [m4_define([m4_Separator], [ ])])]],
-dnl expand the first prefix, then check its length vs. regular prefix
-dnl same length: nothing special
-dnl prefix1 longer: output on line by itself, and reset cursor
-dnl prefix1 shorter: pad to length of prefix, and reset cursor
-[[[$3]m4_cond([m4_Cursor], m4_Indent, [],
- [m4_eval(m4_Cursor > m4_Indent)], [1], [
-[$2]m4_define([m4_Cursor], m4_Indent)],
- [m4_format([%*s], m4_max([0],
- m4_eval(m4_Indent - m4_Cursor)), [])m4_define([m4_Cursor], m4_Indent)])]],
-dnl now, for each word, compute the curser after the word is output, then
-dnl check if the cursor would exceed the wrap column
-dnl if so, reset cursor, and insert newline and prefix
-dnl if not, insert the separator (usually a space)
-dnl either way, insert the word
-[[m4_foreach_w([m4_Word], [$1],
- [m4_define([m4_Cursor],
- m4_eval(m4_Cursor + m4_qlen(_m4_defn([m4_Word]))
- + 1))m4_if(m4_eval(m4_Cursor > ([$4])),
- [1], [m4_define([m4_Cursor],
- m4_eval(m4_Indent + m4_qlen(_m4_defn([m4_Word])) + 1))
-[$2]],
- [m4_Separator[]])_m4_defn([m4_Word])])]],
-dnl finally, clean up the local variabls
-[[_m4_popdef([m4_Separator], [m4_Cursor], [m4_Indent])]]))
-
-
-# m4_text_box(MESSAGE, [FRAME-CHARACTER = `-'])
-# ---------------------------------------------
-# Turn MESSAGE into:
-# ## ------- ##
-# ## MESSAGE ##
-# ## ------- ##
-# using FRAME-CHARACTER in the border.
-m4_define([m4_text_box],
-[m4_pushdef([m4_Border],
- m4_translit(m4_format([%*s], m4_qlen(m4_expand([$1])), []),
- [ ], m4_if([$2], [], [[-]], [[$2]])))dnl
-@%:@@%:@ m4_Border @%:@@%:@
-@%:@@%:@ $1 @%:@@%:@
-@%:@@%:@ m4_Border @%:@@%:@_m4_popdef([m4_Border])dnl
-])
-
-
-# m4_qlen(STRING)
-# ---------------
-# Expands to the length of STRING after autom4te converts all quadrigraphs.
-#
-# Avoid bpatsubsts for the common case of no quadrigraphs.
-m4_define([m4_qlen],
-[m4_if(m4_index([$1], [@]), [-1], [m4_len([$1])],
- [m4_len(m4_bpatsubst([[$1]],
- [@\(\(<:\|:>\|S|\|%:\|\{:\|:\}\)\(@\)\|&t@\)],
- [\3]))])])
-
-
-# m4_qdelta(STRING)
-# -----------------
-# Expands to the net change in the length of STRING from autom4te converting the
-# quadrigraphs in STRING. This number is always negative or zero.
-m4_define([m4_qdelta],
-[m4_eval(m4_qlen([$1]) - m4_len([$1]))])
-
-
-
-## ----------------------- ##
-## 13. Number processing. ##
-## ----------------------- ##
-
-# m4_cmp(A, B)
-# ------------
-# Compare two integer expressions.
-# A < B -> -1
-# A = B -> 0
-# A > B -> 1
-m4_define([m4_cmp],
-[m4_eval((([$1]) > ([$2])) - (([$1]) < ([$2])))])
-
-
-# m4_list_cmp(A, B)
-# -----------------
-#
-# Compare the two lists of integer expressions A and B. For instance:
-# m4_list_cmp([1, 0], [1]) -> 0
-# m4_list_cmp([1, 0], [1, 0]) -> 0
-# m4_list_cmp([1, 2], [1, 0]) -> 1
-# m4_list_cmp([1, 2, 3], [1, 2]) -> 1
-# m4_list_cmp([1, 2, -3], [1, 2]) -> -1
-# m4_list_cmp([1, 0], [1, 2]) -> -1
-# m4_list_cmp([1], [1, 2]) -> -1
-# m4_define([xa], [oops])dnl
-# m4_list_cmp([[0xa]], [5+5]) -> 0
-#
-# Rather than face the overhead of m4_case, we use a helper function whose
-# expansion includes the name of the macro to invoke on the tail, either
-# m4_ignore or m4_unquote. This is particularly useful when comparing
-# long lists, since less text is being expanded for deciding when to end
-# recursion. The recursion is between a pair of macros that alternate
-# which list is trimmed by one element; this is more efficient than
-# calling m4_cdr on both lists from a single macro.
-m4_define([m4_list_cmp],
-[m4_if([$1], [$2], [0], [_m4_list_cmp_1([$1], $2)])])
-
-m4_define([_m4_list_cmp],
-[m4_if([$1], [], [0m4_ignore], [$2], [0], [m4_unquote], [$2m4_ignore])])
-
-m4_define([_m4_list_cmp_1],
-[_m4_list_cmp_2([$2], m4_dquote(m4_shift2($@)), $1)])
-
-m4_define([_m4_list_cmp_2],
-[_m4_list_cmp([$1$3], m4_cmp([$3+0], [$1+0]))(
- [_m4_list_cmp_1(m4_dquote(m4_shift3($@)), $2)])])
-
-# m4_max(EXPR, ...)
-# m4_min(EXPR, ...)
-# -----------------
-# Return the decimal value of the maximum (or minimum) in a series of
-# integer expressions.
-#
-# M4 1.4.x doesn't provide ?:. Hence this huge m4_eval. Avoid m4_eval
-# if both arguments are identical, but be aware of m4_max(0xa, 10) (hence
-# the use of <=, not just <, in the second multiply).
-m4_define([m4_max],
-[m4_if([$#], [0], [m4_fatal([too few arguments to $0])],
- [$#], [1], [m4_eval([$1])],
- [$#$1], [2$2], [m4_eval([$1])],
- [$#], [2], [_$0($@)],
- [_m4_minmax([_$0], $@)])])
-
-m4_define([_m4_max],
-[m4_eval((([$1]) > ([$2])) * ([$1]) + (([$1]) <= ([$2])) * ([$2]))])
-
-m4_define([m4_min],
-[m4_if([$#], [0], [m4_fatal([too few arguments to $0])],
- [$#], [1], [m4_eval([$1])],
- [$#$1], [2$2], [m4_eval([$1])],
- [$#], [2], [_$0($@)],
- [_m4_minmax([_$0], $@)])])
-
-m4_define([_m4_min],
-[m4_eval((([$1]) < ([$2])) * ([$1]) + (([$1]) >= ([$2])) * ([$2]))])
-
-# _m4_minmax(METHOD, ARG1, ARG2...)
-# ---------------------------------
-# Common recursion code for m4_max and m4_min. METHOD must be _m4_max
-# or _m4_min, and there must be at least two arguments to combine.
-m4_define([_m4_minmax],
-[m4_if([$#], [3], [$1([$2], [$3])],
- [$0([$1], $1([$2], [$3]), m4_shift3($@))])])
-
-
-# m4_sign(A)
-# ----------
-# The sign of the integer expression A.
-m4_define([m4_sign],
-[m4_eval((([$1]) > 0) - (([$1]) < 0))])
-
-
-
-## ------------------------ ##
-## 14. Version processing. ##
-## ------------------------ ##
-
-
-# m4_version_unletter(VERSION)
-# ----------------------------
-# Normalize beta version numbers with letters to numeric expressions, which
-# can then be handed to m4_eval for the purpose of comparison.
-#
-# Nl -> (N+1).-1.(l#)
-#
-# for example:
-# [2.14a] -> [2.14+1.-1.[0r36:a]] -> 2.15.-1.10
-# [2.14b] -> [2.15+1.-1.[0r36:b]] -> 2.15.-1.11
-# [2.61aa.b] -> [2.61+1.-1.[0r36:aa],+1.-1.[0r36:b]] -> 2.62.-1.370.1.-1.11
-#
-# This macro expects reasonable version numbers, but can handle double
-# letters and does not expand any macros. Original version strings can
-# use both `.' and `-' separators.
-#
-# Inline constant expansions, to avoid m4_defn overhead.
-# _m4_version_unletter is the real workhorse used by m4_version_compare,
-# but since [0r36:a] is less readable than 10, we provide a wrapper for
-# human use.
-m4_define([m4_version_unletter],
-[m4_map_sep([m4_eval], [.],
- m4_dquote(m4_dquote_elt(m4_unquote(_$0([$1])))))])
-m4_define([_m4_version_unletter],
-[m4_bpatsubst(m4_translit([[[$1]]], [.-], [,,]),]dnl
-m4_dquote(m4_dquote(m4_defn([m4_cr_Letters])))[[+],
- [+1,-1,[0r36:\&]])])
-
-
-# m4_version_compare(VERSION-1, VERSION-2)
-# ----------------------------------------
-# Compare the two version numbers and expand into
-# -1 if VERSION-1 < VERSION-2
-# 0 if =
-# 1 if >
-m4_define([m4_version_compare],
-[m4_list_cmp(_m4_version_unletter([$1]), _m4_version_unletter([$2]))])
-
-
-# m4_PACKAGE_NAME
-# m4_PACKAGE_TARNAME
-# m4_PACKAGE_VERSION
-# m4_PACKAGE_STRING
-# m4_PACKAGE_BUGREPORT
-# --------------------
-# If m4sugar/version.m4 is present, then define version strings. This
-# file is optional, provided by Autoconf but absent in Bison.
-m4_sinclude([m4sugar/version.m4])
-
-
-# m4_version_prereq(VERSION, [IF-OK], [IF-NOT = FAIL])
-# ----------------------------------------------------
-# Check this Autoconf version against VERSION.
-m4_define([m4_version_prereq],
-m4_ifdef([m4_PACKAGE_VERSION],
-[[m4_if(m4_version_compare(]m4_dquote(m4_defn([m4_PACKAGE_VERSION]))[, [$1]),
- [-1],
- [m4_default([$3],
- [m4_fatal([Autoconf version $1 or higher is required],
- [63])])],
- [$2])]],
-[[m4_fatal([m4sugar/version.m4 not found])]]))
-
-
-## ------------------ ##
-## 15. Set handling. ##
-## ------------------ ##
-
-# Autoconf likes to create arbitrarily large sets; for example, as of
-# this writing, the configure.ac for coreutils tracks a set of more
-# than 400 AC_SUBST. How do we track all of these set members,
-# without introducing duplicates? We could use m4_append_uniq, with
-# the set NAME residing in the contents of the macro NAME.
-# Unfortunately, m4_append_uniq is quadratic for set creation, because
-# it costs O(n) to search the string for each of O(n) insertions; not
-# to mention that with m4 1.4.x, even using m4_append is slow, costing
-# O(n) rather than O(1) per insertion. Other set operations, not used
-# by Autoconf but still possible by manipulation of the definition
-# tracked in macro NAME, include O(n) deletion of one element and O(n)
-# computation of set size. Because the set is exposed to the user via
-# the definition of a single macro, we cannot cache any data about the
-# set without risking the cache being invalidated by the user
-# redefining NAME.
-#
-# Can we do better? Yes, because m4 gives us an O(1) search function
-# for free: ifdef. Additionally, even m4 1.4.x gives us an O(1)
-# insert operation for free: pushdef. But to use these, we must
-# represent the set via a group of macros; to keep the set consistent,
-# we must hide the set so that the user can only manipulate it through
-# accessor macros. The contents of the set are maintained through two
-# access points; _m4_set([name]) is a pushdef stack of values in the
-# set, useful for O(n) traversal of the set contents; while the
-# existence of _m4_set([name],value) with no particular value is
-# useful for O(1) querying of set membership. And since the user
-# cannot externally manipulate the set, we are free to add additional
-# caching macros for other performance improvements. Deletion can be
-# O(1) per element rather than O(n), by reworking the definition of
-# _m4_set([name],value) to be 0 or 1 based on current membership, and
-# adding _m4_set_cleanup(name) to defer the O(n) cleanup of
-# _m4_set([name]) until we have another reason to do an O(n)
-# traversal. The existence of _m4_set_cleanup(name) can then be used
-# elsewhere to determine if we must dereference _m4_set([name],value),
-# or assume that definition implies set membership. Finally, size can
-# be tracked in an O(1) fashion with _m4_set_size(name).
-#
-# The quoting in _m4_set([name],value) is chosen so that there is no
-# ambiguity with a set whose name contains a comma, and so that we can
-# supply the value via _m4_defn([_m4_set([name])]) without needing any
-# quote manipulation.
-
-# m4_set_add(SET, VALUE, [IF-UNIQ], [IF-DUP])
-# -------------------------------------------
-# Add VALUE as an element of SET. Expand IF-UNIQ on the first
-# addition, and IF-DUP if it is already in the set. Addition of one
-# element is O(1), such that overall set creation is O(n).
-#
-# We do not want to add a duplicate for a previously deleted but
-# unpruned element, but it is just as easy to check existence directly
-# as it is to query _m4_set_cleanup($1).
-m4_define([m4_set_add],
-[m4_ifdef([_m4_set([$1],$2)],
- [m4_if(m4_indir([_m4_set([$1],$2)]), [0],
- [m4_define([_m4_set([$1],$2)],
- [1])_m4_set_size([$1], [m4_incr])$3], [$4])],
- [m4_define([_m4_set([$1],$2)],
- [1])m4_pushdef([_m4_set([$1])],
- [$2])_m4_set_size([$1], [m4_incr])$3])])
-
-# m4_set_add_all(SET, VALUE...)
-# -----------------------------
-# Add each VALUE into SET. This is O(n) in the number of VALUEs, and
-# can be faster than calling m4_set_add for each VALUE.
-#
-# Implement two recursion helpers; the check variant is slower but
-# handles the case where an element has previously been removed but
-# not pruned. The recursion helpers ignore their second argument, so
-# that we can use the faster m4_shift2 and 2 arguments, rather than
-# _m4_shift2 and one argument, as the signal to end recursion.
-m4_define([m4_set_add_all],
-[m4_define([_m4_set_size($1)], m4_eval(m4_set_size([$1])
- + m4_len(m4_ifdef([_m4_set_cleanup($1)], [_$0_check], [_$0])([$1], $@))))])
-
-m4_define([_m4_set_add_all],
-[m4_if([$#], [2], [],
- [m4_ifdef([_m4_set([$1],$3)], [],
- [m4_define([_m4_set([$1],$3)], [1])m4_pushdef([_m4_set([$1])],
- [$3])-])$0([$1], m4_shift2($@))])])
-
-m4_define([_m4_set_add_all_check],
-[m4_if([$#], [2], [],
- [m4_set_add([$1], [$3])$0([$1], m4_shift2($@))])])
-
-# m4_set_contains(SET, VALUE, [IF-PRESENT], [IF-ABSENT])
-# ------------------------------------------------------
-# Expand IF-PRESENT if SET contains VALUE, otherwise expand IF-ABSENT.
-# This is always O(1).
-m4_define([m4_set_contains],
-[m4_ifdef([_m4_set_cleanup($1)],
- [m4_if(m4_ifdef([_m4_set([$1],$2)],
- [m4_indir([_m4_set([$1],$2)])], [0]), [1], [$3], [$4])],
- [m4_ifdef([_m4_set([$1],$2)], [$3], [$4])])])
-
-# m4_set_contents(SET, [SEP])
-# ---------------------------
-# Expand to a single string containing all the elements in SET,
-# separated by SEP, without modifying SET. No provision is made for
-# disambiguating set elements that contain non-empty SEP as a
-# sub-string, or for recognizing a set that contains only the empty
-# string. Order of the output is not guaranteed. If any elements
-# have been previously removed from the set, this action will prune
-# the unused memory. This is O(n) in the size of the set before
-# pruning.
-#
-# Use _m4_popdef for speed. The existence of _m4_set_cleanup($1)
-# determines which version of _1 helper we use.
-m4_define([m4_set_contents],
-[m4_ifdef([_m4_set_cleanup($1)], [_$0_1c], [_$0_1])([$1])_$0_2([$1],
- [_m4_defn([_m4_set_($1)])], [[$2]])])
-
-# _m4_set_contents_1(SET)
-# _m4_set_contents_1c(SET)
-# _m4_set_contents_2(SET, SEP, PREP)
-# ----------------------------------
-# Expand to a list of quoted elements currently in the set, separated
-# by SEP, and moving PREP in front of SEP on recursion. To avoid
-# nesting limit restrictions, the algorithm must be broken into two
-# parts; _1 destructively copies the stack in reverse into
-# _m4_set_($1), producing no output; then _2 destructively copies
-# _m4_set_($1) back into the stack in reverse. SEP is expanded while
-# _m4_set_($1) contains the current element, so a SEP containing
-# _m4_defn([_m4_set_($1)]) can produce output in the order the set was
-# created. Behavior is undefined if SEP tries to recursively list or
-# modify SET in any way other than calling m4_set_remove on the
-# current element. Use _1 if all entries in the stack are guaranteed
-# to be in the set, and _1c to prune removed entries. Uses _m4_defn
-# and _m4_popdef for speed.
-m4_define([_m4_set_contents_1],
-[m4_ifdef([_m4_set([$1])], [m4_pushdef([_m4_set_($1)],
- _m4_defn([_m4_set([$1])]))_m4_popdef([_m4_set([$1])])$0([$1])])])
-
-m4_define([_m4_set_contents_1c],
-[m4_ifdef([_m4_set([$1])],
- [m4_set_contains([$1], _m4_defn([_m4_set([$1])]),
- [m4_pushdef([_m4_set_($1)], _m4_defn([_m4_set([$1])]))],
- [_m4_popdef([_m4_set([$1],]_m4_defn(
- [_m4_set([$1])])[)])])_m4_popdef([_m4_set([$1])])$0([$1])],
- [_m4_popdef([_m4_set_cleanup($1)])])])
-
-m4_define([_m4_set_contents_2],
-[m4_ifdef([_m4_set_($1)], [m4_pushdef([_m4_set([$1])],
- _m4_defn([_m4_set_($1)]))$2[]_m4_popdef([_m4_set_($1)])$0([$1], [$3$2])])])
-
-# m4_set_delete(SET)
-# ------------------
-# Delete all elements in SET, and reclaim any memory occupied by the
-# set. This is O(n) in the set size.
-#
-# Use _m4_defn and _m4_popdef for speed.
-m4_define([m4_set_delete],
-[m4_ifdef([_m4_set([$1])],
- [_m4_popdef([_m4_set([$1],]_m4_defn([_m4_set([$1])])[)],
- [_m4_set([$1])])$0([$1])],
- [m4_ifdef([_m4_set_cleanup($1)],
- [_m4_popdef([_m4_set_cleanup($1)])])m4_ifdef(
- [_m4_set_size($1)],
- [_m4_popdef([_m4_set_size($1)])])])])
-
-# m4_set_difference(SET1, SET2)
-# -----------------------------
-# Produce a LIST of quoted elements that occur in SET1 but not SET2.
-# Output a comma prior to any elements, to distinguish the empty
-# string from no elements. This can be directly used as a series of
-# arguments, such as for m4_join, or wrapped inside quotes for use in
-# m4_foreach. Order of the output is not guaranteed.
-#
-# Short-circuit the idempotence relation. Use _m4_defn for speed.
-m4_define([m4_set_difference],
-[m4_if([$1], [$2], [],
- [m4_set_foreach([$1], [_m4_element],
- [m4_set_contains([$2], _m4_defn([_m4_element]), [],
- [,_m4_defn([_m4_element])])])])])
-
-# m4_set_dump(SET, [SEP])
-# -----------------------
-# Expand to a single string containing all the elements in SET,
-# separated by SEP, then delete SET. In general, if you only need to
-# list the contents once, this is faster than m4_set_contents. No
-# provision is made for disambiguating set elements that contain
-# non-empty SEP as a sub-string. Order of the output is not
-# guaranteed. This is O(n) in the size of the set before pruning.
-#
-# Use _m4_popdef for speed. Use existence of _m4_set_cleanup($1) to
-# decide if more expensive recursion is needed.
-m4_define([m4_set_dump],
-[m4_ifdef([_m4_set_size($1)],
- [_m4_popdef([_m4_set_size($1)])])m4_ifdef([_m4_set_cleanup($1)],
- [_$0_check], [_$0])([$1], [], [$2])])
-
-# _m4_set_dump(SET, SEP, PREP)
-# _m4_set_dump_check(SET, SEP, PREP)
-# ----------------------------------
-# Print SEP and the current element, then delete the element and
-# recurse with empty SEP changed to PREP. The check variant checks
-# whether the element has been previously removed. Use _m4_defn and
-# _m4_popdef for speed.
-m4_define([_m4_set_dump],
-[m4_ifdef([_m4_set([$1])],
- [[$2]_m4_defn([_m4_set([$1])])_m4_popdef([_m4_set([$1],]_m4_defn(
- [_m4_set([$1])])[)], [_m4_set([$1])])$0([$1], [$2$3])])])
-
-m4_define([_m4_set_dump_check],
-[m4_ifdef([_m4_set([$1])],
- [m4_set_contains([$1], _m4_defn([_m4_set([$1])]),
- [[$2]_m4_defn([_m4_set([$1])])])_m4_popdef(
- [_m4_set([$1],]_m4_defn([_m4_set([$1])])[)],
- [_m4_set([$1])])$0([$1], [$2$3])],
- [_m4_popdef([_m4_set_cleanup($1)])])])
-
-# m4_set_empty(SET, [IF-EMPTY], [IF-ELEMENTS])
-# --------------------------------------------
-# Expand IF-EMPTY if SET has no elements, otherwise IF-ELEMENTS.
-m4_define([m4_set_empty],
-[m4_ifdef([_m4_set_size($1)],
- [m4_if(m4_indir([_m4_set_size($1)]), [0], [$2], [$3])], [$2])])
-
-# m4_set_foreach(SET, VAR, ACTION)
-# --------------------------------
-# For each element of SET, define VAR to the element and expand
-# ACTION. ACTION should not recursively list SET's contents, add
-# elements to SET, nor delete any element from SET except the one
-# currently in VAR. The order that the elements are visited in is not
-# guaranteed. This is faster than the corresponding m4_foreach([VAR],
-# m4_indir([m4_dquote]m4_set_listc([SET])), [ACTION])
-m4_define([m4_set_foreach],
-[m4_pushdef([$2])m4_ifdef([_m4_set_cleanup($1)],
- [_m4_set_contents_1c], [_m4_set_contents_1])([$1])_m4_set_contents_2([$1],
- [m4_define([$2], _m4_defn([_m4_set_($1)]))$3[]])m4_popdef([$2])])
-
-# m4_set_intersection(SET1, SET2)
-# -------------------------------
-# Produce a LIST of quoted elements that occur in both SET1 or SET2.
-# Output a comma prior to any elements, to distinguish the empty
-# string from no elements. This can be directly used as a series of
-# arguments, such as for m4_join, or wrapped inside quotes for use in
-# m4_foreach. Order of the output is not guaranteed.
-#
-# Iterate over the smaller set, and short-circuit the idempotence
-# relation. Use _m4_defn for speed.
-m4_define([m4_set_intersection],
-[m4_if([$1], [$2], [m4_set_listc([$1])],
- m4_eval(m4_set_size([$2]) < m4_set_size([$1])), [1], [$0([$2], [$1])],
- [m4_set_foreach([$1], [_m4_element],
- [m4_set_contains([$2], _m4_defn([_m4_element]),
- [,_m4_defn([_m4_element])])])])])
-
-# m4_set_list(SET)
-# m4_set_listc(SET)
-# -----------------
-# Produce a LIST of quoted elements of SET. This can be directly used
-# as a series of arguments, such as for m4_join or m4_set_add_all, or
-# wrapped inside quotes for use in m4_foreach or m4_map. With
-# m4_set_list, there is no way to distinguish an empty set from a set
-# containing only the empty string; with m4_set_listc, a leading comma
-# is output if there are any elements.
-m4_define([m4_set_list],
-[m4_ifdef([_m4_set_cleanup($1)], [_m4_set_contents_1c],
- [_m4_set_contents_1])([$1])_m4_set_contents_2([$1],
- [_m4_defn([_m4_set_($1)])], [,])])
-
-m4_define([m4_set_listc],
-[m4_ifdef([_m4_set_cleanup($1)], [_m4_set_contents_1c],
- [_m4_set_contents_1])([$1])_m4_set_contents_2([$1],
- [,_m4_defn([_m4_set_($1)])])])
-
-# m4_set_remove(SET, VALUE, [IF-PRESENT], [IF-ABSENT])
-# ----------------------------------------------------
-# If VALUE is an element of SET, delete it and expand IF-PRESENT.
-# Otherwise expand IF-ABSENT. Deleting a single value is O(1),
-# although it leaves memory occupied until the next O(n) traversal of
-# the set which will compact the set.
-#
-# Optimize if the element being removed is the most recently added,
-# since defining _m4_set_cleanup($1) slows down so many other macros.
-# In particular, this plays well with m4_set_foreach.
-m4_define([m4_set_remove],
-[m4_set_contains([$1], [$2], [_m4_set_size([$1],
- [m4_decr])m4_if(_m4_defn([_m4_set([$1])]), [$2],
- [_m4_popdef([_m4_set([$1],$2)], [_m4_set([$1])])],
- [m4_define([_m4_set_cleanup($1)])m4_define(
- [_m4_set([$1],$2)], [0])])$3], [$4])])
-
-# m4_set_size(SET)
-# ----------------
-# Expand to the number of elements currently in SET. This operation
-# is O(1), and thus more efficient than m4_count(m4_set_list([SET])).
-m4_define([m4_set_size],
-[m4_ifdef([_m4_set_size($1)], [m4_indir([_m4_set_size($1)])], [0])])
-
-# _m4_set_size(SET, ACTION)
-# -------------------------
-# ACTION must be either m4_incr or m4_decr, and the size of SET is
-# changed accordingly. If the set is empty, ACTION must not be
-# m4_decr.
-m4_define([_m4_set_size],
-[m4_define([_m4_set_size($1)],
- m4_ifdef([_m4_set_size($1)], [$2(m4_indir([_m4_set_size($1)]))],
- [1]))])
-
-# m4_set_union(SET1, SET2)
-# ------------------------
-# Produce a LIST of double quoted elements that occur in either SET1
-# or SET2, without duplicates. Output a comma prior to any elements,
-# to distinguish the empty string from no elements. This can be
-# directly used as a series of arguments, such as for m4_join, or
-# wrapped inside quotes for use in m4_foreach. Order of the output is
-# not guaranteed.
-#
-# We can rely on the fact that m4_set_listc prunes SET1, so we don't
-# need to check _m4_set([$1],element) for 0. Use _m4_defn for speed.
-# Short-circuit the idempotence relation.
-m4_define([m4_set_union],
-[m4_set_listc([$1])m4_if([$1], [$2], [], [m4_set_foreach([$2], [_m4_element],
- [m4_ifdef([_m4_set([$1],]_m4_defn([_m4_element])[)], [],
- [,_m4_defn([_m4_element])])])])])
-
-
-## ------------------- ##
-## 16. File handling. ##
-## ------------------- ##
-
-
-# It is a real pity that M4 comes with no macros to bind a diversion
-# to a file. So we have to deal without, which makes us a lot more
-# fragile than we should.
-
-
-# m4_file_append(FILE-NAME, CONTENT)
-# ----------------------------------
-m4_define([m4_file_append],
-[m4_syscmd([cat >>$1 <<_m4eof
-$2
-_m4eof
-])
-m4_if(m4_sysval, [0], [],
- [m4_fatal([$0: cannot write: $1])])])
-
-
-
-## ------------------------ ##
-## 17. Setting M4sugar up. ##
-## ------------------------ ##
-
-
-# m4_init
-# -------
-# Initialize the m4sugar language.
-m4_define([m4_init],
-[# All the M4sugar macros start with `m4_', except `dnl' kept as is
-# for sake of simplicity.
-m4_pattern_forbid([^_?m4_])
-m4_pattern_forbid([^dnl$])
-
-# If __m4_version__ is defined, we assume that we are being run by M4
-# 1.6 or newer, and thus that $@ recursion is linear; nothing further
-# needs to be done. But if it is missing, we assume we are being run
-# by M4 1.4.x, that $@ recursion is quadratic, and that we need
-# foreach-based replacement macros. Use the raw builtin to avoid
-# tripping up include tracing.
-m4_ifndef([__m4_version__], [m4_builtin([include], [m4sugar/foreach.m4])])
-
-# _m4_divert_diversion should be defined:
-m4_divert_push([KILL])
-
-# Check the divert push/pop perfect balance.
-m4_wrap([m4_divert_pop([])
- m4_ifdef([_m4_divert_diversion],
- [m4_fatal([$0: unbalanced m4_divert_push:]_m4_divert_n_stack)])[]])
-])
projects / bison.git / blobdiff