+2007-01-08 Joel E. Denny <jdenny@ces.clemson.edu>
+
+ Instead of having skeletons declare all valid %define variables and
+ %code qualifiers, provide macros that retrieve the associated values
+ and build these lists automatically. Thus Bison will now warn when a
+ variable or qualifier is not used by the skeleton in the current
+ invocation regardless of whether it might sometimes be used by that
+ skeleton in other invocations. Also, move all %define value macros to
+ the b4_percent_define_ namespace, and remove the %define "NAME" {CODE}
+ form, which is replaced by %code.
+ * data/bison.m4 (b4_check_for_unrecognized_names): Rename to...
+ (b4_check_user_names): ... this, and change the series of valid name
+ arguments to a single list argument for names used in the skeleton
+ similar to the existing list argument for names used in the grammar.
+ Warn instead of complaining.
+ (b4_get_percent_define, b4_get_percent_code): New to retrieve %define
+ values and %code code, to format %code code properly, and to build
+ lists of all %define variables and %code qualifiers used in the
+ skeleton: b4_skeleton_percent_define_variables and
+ b4_skeleton_percent_code_qualifiers.
+ (b4_check_percent_define_variables, b4_check_percent_code_qualifiers):
+ Remove, and...
+ (m4_wrap): ... m4_wrap b4_check_user_names invocations instead so that
+ the skeleton names lists can finish building first. In place of
+ b4_used_percent_define_variables and b4_used_percent_code_qualifiers,
+ expect the lists b4_user_percent_define_variables and
+ b4_user_percent_code_qualifiers.
+ * data/c++.m4: Where setting default values for b4_parser_class_name,
+ b4_location_type, b4_filename_type, b4_namespace, and
+ b4_define_location_comparison, update their names to the
+ b4_percent_define_ namespace.
+ * data/glr.c: Don't use b4_check_percent_define_variables and
+ b4_check_percent_code_qualifiers. Use b4_get_percent_code.
+ * data/glr.cc, data/lalr1.cc: Likewise, and use b4_get_percent_define.
+ (b4_parser_class_name, b4_namespace): Define these using
+ b4_get_percent_define for parser_class_name and namespace. Normally
+ this would be a bad idea since there might be cases when the variables
+ aren't used, but these variables are too pervasive in these skeletons
+ for that to be a problem.
+ * data/location.cc: Use b4_get_percent_define.
+ * data/push.c: Don't use b4_check_percent_define_variables and
+ b4_check_percent_code_qualifiers. Use b4_get_percent_code.
+ * data/yacc.c: Likewise, and don't call m4_exit in
+ b4_use_push_for_pull_if or m4_wrap code will never execute.
+ * src/muscle_tab.c, src/muscle_tab.h (muscle_grow_used_name_list):
+ Rename to...
+ (muscle_grow_user_name_list): ... this for consistency with the
+ terminology used in bison.m4.
+ * src/parse-gram.y (prologue_declaration): Prepend "percent_define_" to
+ %define variable names, and rename muscle used_percent_define_variables
+ to user_percent_define_variables.
+ (grammar_declaration): Rename muscle used_percent_code_qualifiers to
+ user_percent_code_qualifiers.
+ (content): Remove.
+ (content.opt): Replace content RHS with STRING RHS so %define "NAME"
+ {CODE} form is no longer accepted.
+ * tests/input.at (Reject bad %code qualifiers): Rename to...
+ (Reject unused %code qualifiers): ... this, and update test output.
+ (%define error): Update test output.
+
+2007-01-07 Joel E. Denny <jdenny@ces.clemson.edu>
+
+ Check for unrecognized %define variables similar to checking for
+ unrecognized %code qualifiers. Check for redefined %define variables.
+ * data/bison.m4 (b4_check_for_unrecognized_names): New macro that
+ generalizes...
+ (b4_check_percent_code_qualifiers): ... this, which now wraps it.
+ (b4_check_percent_define_variables): New, also wraps it.
+ * data/glr.c: Unless glr.cc is wrapping glr.c, declare no valid %define
+ variables using b4_check_percent_define_variables.
+ * data/glr.cc, data/lalr1.cc: Declare the valid %define variables as
+ all those exercised in the test suite and all those listed in the
+ `Default values' section of c++.m4. Are there others?
+ * data/push.c, data/yacc.c: Declare no valid %define variables.
+ * src/muscle_tab.c, src/muscle_tab.h (muscle_find_const): New function,
+ similar to muscle_find, but it works even when the muscle stores a
+ const value.
+ (muscle_grow_used_name_list): New function for constructing the used
+ name list muscles that b4_check_for_unrecognized_names requires.
+ * src/parse-gram.y (prologue_declaration): Warn if a variable is
+ %define'd more than once. Define the b4_used_percent_define_variables
+ muscle with muscle_grow_used_name_list.
+ (grammar_declaration): Abbreviate %code code with
+ muscle_grow_used_name_list.
+ * tests/input.at (%define errors): New.
+
+2007-01-06 Joel E. Denny <jdenny@ces.clemson.edu>
+
+ Provide warn_at, complain_at, and fatal_at function callbacks to the
+ skeletons, and use this for %code qualifier complaints.
+ * data/bison.m4 (b4_error_at): New, invoked by...
+ (b4_warn_at, b4_complain_at, b4_fatal_at): ... these new macros to wrap
+ the skeleton scanner's new @warn_at(...@), @complain_at(...@), and
+ @fatal_at(...@) directives.
+ (b4_check_percent_code_qualifiers): Rewrite to expect locations for
+ qualifiers in b4_used_percent_code_qualifiers and to use
+ b4_complain_at.
+ * src/location.c, src/location.h (boundary_set_from_string): New global
+ function.
+ * src/muscle_tab.c, src/muscle_tab.h (muscle_boundary_grow): New global
+ function.
+ * src/parse-gram.y (grammar_declaration): Add locations for qualifiers
+ to b4_used_percent_code_qualifiers.
+ * src/scan-skel.l (fail_for_at_directive_too_few_args): New static
+ function.
+ (AT_DIRECTIVE_ARGC_MAX): Increase for boundary arguments.
+ (lineno): Rename to...
+ (out_lineno): ... this so I don't misunderstand it again.
+ (SC_AT_DIRECTIVE_SKIP_WS): Don't increment out_lineno for newlines
+ here; these newlines are in the input but not the output file.
+ (SC_AT_DIRECTIVE_ARG): Likewise. Extract directive execution to...
+ (at_directive_perform): ... this new static function, and add handling
+ of new @warn_at(...@), @complain_at(...@), and @fatal_at(...@)
+ directives.
+ * tests/input.at (Reject bad %code qualifiers): Update test output with
+ locations and extend.
+
+ * tests/output.at (Output file name: [, Output file name: ]): Remove
+ bogus comment about these tests failing.
+
+2007-01-06 Joel E. Denny <jdenny@ces.clemson.edu>
+
+ Clean up b4_check_percent_code_qualifiers a little.
+ * data/bison.m4 (b4_check_percent_code_qualifiers): Expect qualifiers
+ in b4_used_percent_code_qualifiers to be double-M4-quoted. Rewrite
+ documentation and add examples.
+ * src/parse-gram.y (grammar_declaration): Double-M4-quote those
+ qualifiers here.
+
+2007-01-05 Joel E. Denny <jdenny@ces.clemson.edu>
+
+ Don't use m4_divert since it makes m4_divert_push and m4_divert_pop
+ unreliable -- especially when they're hidden inside another macro.
+ * data/bison.m4, data/c++-skel.m4, data/c++.m4, data/c-skel.m4,
+ data/c.m4: Remove m4_divert(-1).
+ * data/glr.c, data/glr.cc, data/lalr1.cc, data/location.cc,
+ data/push.c, data/yacc.c: Likewise, and replace m4_divert(0) with
+ m4_divert_push(0) and m4_divert_pop(0).
+ * data/output.c (output_skeleton): Don't add an m4_divert_push(0) and
+ an m4_wrap([m4_divert_pop(0)]) to the M4. Diversion -1, which is
+ pushed and popped by m4sugar, should be first on the stack.
+
+ Provide warn, complain, and fatal function callbacks to the skeletons.
+ This provides more flexibility than m4_fatal, improves the error
+ message format, and captures messages for translation. Discussed
+ starting at
+ <http://lists.gnu.org/archive/html/bison-patches/2006-12/msg00063.html>.
+ * data/bison.m4 (b4_error): New, invoked by...
+ (b4_warn, b4_complain, b4_fatal): ... these new macros to wrap the
+ skeleton scanner's new @warn(...@), @complain(...@), and @fatal(...@)
+ directives. Because these M4 macros might be called when the current
+ diversion is -1 or 0, m4_divert_push and m4_divert_pop is used; thus
+ the previous removal of uses of m4_divert, which caused trouble.
+ (b4_check_percent_code_qualifiers): Use b4_complain instead of
+ m4_fatal to report unrecognized %code qualifiers.
+ * data/c++-skel.m4: Use b4_complain instead of m4_fatal to report C++
+ push parser requests.
+ * data/glr.c: Use b4_complain instead of m4_fatal to report
+ non-deterministic push parser requests.
+ Update @output usage to @output(...@) form.
+ * data/glr.cc, data/lalr1.cc: Use b4_fatal instead of m4_fatal to
+ report missing %defines. Update @output usage to @output(...@) form.
+ * data/location.cc, data/push.c, data/yacc.c: Update @output usage to
+ @output(...@) form.
+ * src/main.c (main): Invoke skel_scanner_free.
+ * src/scan-skel.h (skel_scanner_free): Prototype new function.
+ * src/scan-skel.l (FLEX_NO_OBSTACK): Don't define; we now need the
+ obstack_for_string from flex-scanner.h.
+ (YY_DECL): Use to declare skel_lex static.
+ (decode_at_digraphs): Remove; now handled in the new
+ SC_AT_DIRECTIVE_ARG start condition.
+ (fail_for_at_directive_too_many_args, fail_for_invalid_at): New static
+ functions.
+ (at_directive_name, AT_DIRECTIVE_ARGC_MAX, at_directive_argc,
+ at_directive_argv): New static globals.
+ (INITIAL): Use fail_for_invalid_at.
+ Don't parse `@output file_name\n' or `@basename(...@)'. Instead,
+ recognize the start of a generalized `@directive(...@)' form and
+ start...
+ (SC_AT_DIRECTIVE_ARG): ... this new start condition to parse the
+ directive args (using the new obstack_for_string), to decode the
+ contained @ diagraphs, and to perform the directive. It recognizes
+ @basename(...@), @warn(...@), @complain(...@), @fatal(...@), and
+ @output(...@).
+ (SC_AT_DIRECTIVE_SKIP_WS): New start condition started by
+ SC_AT_DIRECTIVE_ARG to skip whitespace after the argument delimiter,
+ `@,'.
+ (scan_skel): Initialize obstack_for_string on the first call.
+ (skel_scanner_free): New function to free obstack_for_string.
+ * tests/input.at (Reject bad %code qualifiers): Update test output.
+
+2007-01-04 Joel E. Denny <jdenny@ces.clemson.edu>
+
+ Consolidate the 4 prologue alternative directives (%code, %requires,
+ %provides, and %code-top) into a single %code directive with an
+ optional qualifier field. Discussed at
+ <http://lists.gnu.org/archive/html/bison-patches/2007-01/msg00012.html>.
+ * NEWS (2.3a+): Rewrite the existing entry for the prologue
+ alternatives.
+ * doc/bison.texinfo (Prologue Alternatives): Update.
+ (Decl Summary): Update to %code "requires" and %code "provides".
+ (Calc++ Parser): Update to %code "requires".
+ (Bison Symbols): Remove entries for %requires, %provides, and
+ %code-top. Rewrite %code entry, and add a %code "QUALIFIER" entry.
+ * data/bison.m4 (b4_user_provides, b4_user_requires): Remove as these
+ are replaced by b4_percent_code_provides and b4_percent_code_requires,
+ which are skeleton-specific.
+ (b4_check_percent_code_qualifiers): New. A skeleton can use this to
+ declare what %code qualifiers it supports and to complain if any other
+ qualifiers were used in the grammar.
+ * data/glr.cc: Update to use b4_user_code([b4_percent_code_requires])
+ and b4_user_code([b4_percent_code_provides]) in place of
+ b4_user_requires and b4_user_provides.
+ * data/glr.c, data/lalr1.cc, data/push.c, data/yacc.c: Likewise.
+ Add b4_user_code([b4_percent_code_top]) and
+ b4_user_code([b4_percent_code]).
+ Invoke b4_check_percent_code_qualifiers.
+ * src/parse-gram.y (PERCENT_CODE_TOP, PERCENT_PROVIDES,
+ PERCENT_REQUIRES): Remove.
+ (grammar_declaration): Remove RHS's for %code-top, %provides, and
+ %requires. Rewrite the %code RHS as the unqualified form defining the
+ muscle b4_percent_code. Add another RHS for the qualified %code form,
+ which defines muscles of the form b4_percent_code_QUALIFIER and the
+ b4_used_percent_code_qualifiers muscle.
+ * src/scan-gram.l (PERCENT_CODE_TOP, PERCENT_PROVIDES,
+ PERCENT_REQUIRES): Remove.
+ * tests/actions.at (_AT_CHECK_PRINTER_AND_DESTRUCTOR): Update to use
+ %code "requires" and %code "provides".
+ * tests/input.at (Reject bad %code qualifiers): New.
+
+2007-01-03 Joel E. Denny <jdenny@ces.clemson.edu>
+
+ Use the new code_props interface for destructors and printers.
+ * src/symtab.h (symbol, semantic_type): Remove destructor_location and
+ printer_location members, and change the type of the destructor and
+ printer members to code_props.
+ (symbol_destructor_set, symbol_destructor_get, symbol_printer_set,
+ symbol_printer_get, semantic_type_destructor_set,
+ semantic_type_printer_set, default_tagged_destructor_set,
+ default_tagless_destructor_set, default_tagged_printer_set,
+ default_tagless_printer_set): Use code_props in arguments and return
+ types in place of char const * and location.
+ (symbol_destructor_location_get, symbol_printer_location_get): Remove
+ since the locations are now contained in the return of
+ symbol_destructor_get and symbol_printer_get.
+ * src/output.c (symbol_destructors_output, symbol_printers_output):
+ Replace with...
+ (symbol_code_props_output): ... this to eliminate duplicate code.
+ (output_skeleton): Update to use symbol_code_props_output.
+ * src/reader.c (symbol_should_be_used): Update use of
+ symbol_destructor_get.
+ * src/symlist.c (symbol_list_destructor_set, symbol_list_printer_set):
+ Update uses of the various _destructor_set and _printer_set functions.
+ * src/symtab.c: (default_tagged_destructor_location,
+ default_tagless_destructor_location, default_tagged_printer_location,
+ default_tagless_printer_location): Remove since we...
+ (default_tagged_destructor, default_tagless_destructor,
+ default_tagged_printer, default_tagless_printer): ... change the type
+ of these to code_props.
+ (symbol_new, semantic_type_new, symbol_destructor_set,
+ semantic_type_destructor_set, symbol_destructor_get,
+ symbol_printer_set, semantic_type_printer_set, symbol_printer_get,
+ symbol_check_alias_consistency, default_tagged_destructor_set,
+ default_tagless_destructor_set, default_tagged_printer_set,
+ default_tagless_printer_set): Update.
+ (symbol_destructor_location_get, symbol_printer_location_get): Remove.
+ (SYMBOL_CODE_PRINT): New similar to SYMBOL_ATTR_PRINT but for
+ code_props members.
+ (symbol_print): Use SYMBOL_CODE_PRINT.
+
+2007-01-03 Joel E. Denny <jdenny@ces.clemson.edu>
+
+ Use the new code_props interface for rule actions.
+ * src/symlist.h (symbol_list): Replace action, action_location, and
+ used members with a code_props action_props member.
+ * src/reader.c (symbol_should_be_used, grammar_rule_check,
+ grammar_midrule_action, grammar_current_rule_merge_set,
+ grammar_current_rule_symbol_append, packgram): Update.
+ * src/scan-code.h (translate_rule_action): Remove, no longer used.
+ * src/scan-code.l (handle_action_dollar): Update.
+ (translate_rule_action): Remove, no longer used.
+ * src/symlist.c (symbol_list_sym_new, symbol_list_syms_print): Update.
+
+2007-01-02 Joel E. Denny <jdenny@ces.clemson.edu>
+
+ Use the new code_props interface in parse-gram.y.
+ * src/parse-gram.y (prologue_declaration, braceless, epilogue.opt):
+ Update all uses of translate_* functions to use the new code_props
+ interface and to use gram_scanner_last_string_free and
+ code_scanner_last_string_free where possible.
+ (grammar_declaration): symbol_list_destructor_set and
+ symbol_list_printer_set now perform the translation, so don't do it
+ here. Use gram_scanner_last_string_free where possible.
+ * src/scan-code.h, src/scan-code.l (translate_symbol_action,
+ translate_code): Remove, no longer used.
+ * src/symlist.h, src/symlist.c (symbol_list_destructor_set,
+ symbol_list_printer_set): Perform code translation here rather than
+ depending on the caller to do so.
+
+ * src/symlist.h (struct symbol_list): Correct some documentation typos.
+ * src/scan-gram.h (gram_last_string): Remove declaration.
+ * src/scan-gram.l (last_string): Declare it static.
+
+2007-01-02 Joel E. Denny <jdenny@ces.clemson.edu>
+
+ Encapsulate code properties and related functionality for the various
+ destructors, printers, and actions into a code_props structure and
+ interface. This patch merely implements code_props in scan-code.h and
+ scan-code.l. Future patches will rewrite other modules to use it.
+ Discussed starting at
+ <http://lists.gnu.org/archive/html/bison-patches/2006-11/msg00020.html>.
+ * src/location.h (EMPTY_LOCATION_INIT): Define so that it's easier to
+ consistently initialize const structs that have an empty location
+ field.
+ * src/location.c (empty_location): Initialize with EMPTY_LOCATION_INIT
+ to ensure consistency.
+ * src/scan-code.h (code_props): New structure.
+ (code_props_none_init, CODE_PROPS_NONE_INIT, code_props_none): New
+ function, macro, and const global variable for initializing a
+ code_props with no code.
+ (code_props_plain_init, code_props_symbol_action_init,
+ code_props_rule_action_init, code_props_translate_code): The rest of
+ the new code_props functional interface. Among other things, the init
+ functions set the code_props kind field so that
+ code_props_translate_code will know whether to behave like
+ translate_symbol_action, translate_rule_action, or translate_code.
+ These old translate functions must remain until all other modules are
+ updated to use the new code_props interface.
+ (code_scanner_last_string_free): New function similar to
+ gram_scanner_last_string_free.
+ (code_scanner_free): Add documentation.
+ * src/scan-code.l: Implement the new interface.
+ (code_lex): Make it static, add a code_props* argument, and remove the
+ rule argument.
+ (last_string): New static global similar to the one in scan-gram.l.
+ (SC_RULE_ACTION): Update to use the code_props* argument to code_lex
+ instead of rule.
+ (SC_SYMBOL_ACTION): For $$, set the is_value_used member of the
+ code_props since Bison may one day use this information for destructors
+ and printers.
+ (<*><<EOF>>): Use STRING_FINISH so that last_string is set.
+ (handle_action_dollar): Use symbol_list_n_get and set used flag
+ directly since symbol_list_n_used_set is removed.
+ (translate_action): Add a code_props* argument and remove the rule,
+ action, and location arguments. Pass the code_props* on to code_lex.
+ (translate_rule_action, translate_symbol_action, translate_code):
+ Rewrite as wrappers around the new code_props interface.
+ * src/symlist.h, src/symlist.c (symbol_list_n_used_set): Remove since
+ it would eventually need to break the encapsulation of code_props.
+
+2007-01-01 Joel E. Denny <jdenny@ces.clemson.edu>
+
+ * etc/.cvsignore: New.
+
+2007-01-01 Joel E. Denny <jdenny@ces.clemson.edu>
+
+ Add maintainer-push-check to run maintainer-check using push parsing in
+ place of pull parsing where available.
+ * Makefile.am (maintainer-push-check): New.
+ * data/bison.m4 (b4_use_push_for_pull_if): New.
+ * data/push.c: Redefine b4_push_if and b4_use_push_for_pull_if
+ appropriately based on their existing values.
+ (yypush_parse): Don't print push-parser-specific diagnostics if push
+ parsing is being used in place of pull parsing.
+ * data/yacc.c: If push parsing should replace pull parsing, redirect to
+ push.c.
+ * src/output.c (prepare): Check BISON_USE_PUSH_FOR_PULL environment
+ variable, and insert b4_use_push_for_pull_flag into muscles.
+ * tests/Makefile.am (maintainer-push-check): New.
+
+2006-12-31 Joel E. Denny <jdenny@ces.clemson.edu>
+
+ * data/push.c (yypush_parse): Set yynew = 1 at the end of a parse
+ (whether successful or failed) so that yypush_parse can be invoked
+ again to start a new parse using the same yypstate.
+ * tests/torture.at (AT_DATA_STACK_TORTURE): For push mode, extend to
+ check multiple yypull_parse invocations on the same yypstate. For pull
+ mode, extend to check multiple yyparse invocations.
+ (Exploding the Stack Size with Alloca): Extend to try with
+ %push-pull-parser.
+ (Exploding the Stack Size with Malloc): Likewise.
+
+ * tests/calc.at (Simple LALR Calculator): Don't specify
+ %skeleton "push.c" since %push-pull-parser implies that now.
+ * tests/headers.at (export YYLTYPE): Don't check for the push
+ declarations. Otherwise, this test case can't be used to see if push
+ mode can truly emulate pull mode.
+ * tests/input.at (Torturing the Scanner): Likewise.
+ * tests/local.at (AT_YACC_OR_PUSH_IF, AT_PUSH_IF): Remove.
+ (AT_YYERROR_SEES_LOC_IF): Rather than AT_YACC_OR_PUSH_IF, use
+ AT_YACC_IF, which now includes the case of push mode since %skeleton
+ need not be used for push mode. This will be more intuitive once
+ push.c is renamed to yacc.c.
+
+2006-12-31 Joel E. Denny <jdenny@ces.clemson.edu>
+
+ For push mode, convert yyparse from a macro to a function, invoke yylex
+ instead of passing a yylexp argument to yypull_parse, and don't
+ generate yypull_parse or yyparse unless %push-pull-parser is declared.
+ Discussed starting at
+ <http://lists.gnu.org/archive/html/bison-patches/2006-12/msg00163.html>.
+ * data/bison.m4 (b4_pull_if): New.
+ * data/c.m4 (b4_identification): Define YYPULL similar to YYPUSH.
+ * data/push.c: Improve M4 quoting a little.
+ (b4_generate_macro_args, b4_parenthesize): Remove.
+ (yyparse): If there's a b4_prefix, #define this to b4_prefix[parse]
+ any time a pull parser is requested.
+ Don't #define this as a wrapper around yypull_parse. Instead, when
+ both push and pull are requested, make it a function that does that
+ same thing.
+ (yypull_parse): If there's a b4_prefix, #define this to
+ b4_prefix[pull_parse] when both push and pull are requested.
+ Don't define this as a function unless both push and pull are
+ requested.
+ Remove the yylexp argument and hard-code yylex invocation instead.
+ * etc/bench.pl.in (bench_grammar): Use %push-pull-parser instead of
+ %push-parser.
+ * src/getargs.c (pull_parser): New global initialized to true.
+ * getargs.h (pull_parser): extern it.
+ * src/output.c (prepare): Insert pull_flag muscle.
+ * src/parse-gram.y (PERCENT_PUSH_PULL_PARSER): New token.
+ (prologue_declaration): Set both push_parser and pull_parser = true for
+ %push-pull-parser. Set push_parser = true and pull_parser = false for
+ %push-parser.
+ * src/scan-gram.l: Don't accept %push_parser as an alternative to
+ %push-parser since there's no backward-compatibility concern here.
+ Scan %push-pull-parser.
+ * tests/calc.at (Simple LALR(1) Calculator): Use %push-pull-parser
+ instead of %push-parser.
+ * tests/headers.at (export YYLTYPE): Make yylex static, and don't
+ prototype it in the module that calls yyparse.
+ * tests/input.at (Torturing the Scanner): Likewise.
+ * tests/local.at (AT_PUSH_IF): Check for %push-pull-parser as well.
+
+2006-12-26 Joel E. Denny <jdenny@ces.clemson.edu>
+
+ Update etc/bench.pl. Optimize push mode a little (the yyn change
+ deserves most of the credit).
+ * Makefile.am (SUBDIRS): Add etc subdirectory.
+ * configure.ac (AC_CONFIG_FILES): Add etc/bench.pl and etc/Makefile.
+ * data/push.c (b4_declare_parser_state_variables): Move yyn, yyresult,
+ yytoken, yyval, and yyloc declarations to...
+ (yyparse or yypush_parse): ... here to improve performance. For
+ yypush_parse invocations after the first, be sure to assign yyn its old
+ value again.
+ (yypstate_new): Don't bother initializing the yyresult field since the
+ initial value isn't used.
+ (yyn, yyresult, yytoken, yyval, yyloc): For each NAME in this list,
+ remove the #define that, in push mode, set it to yyps->NAME.
+ * etc/Makefile.am: New.
+ * etc/bench.pl: Remove and build it instead from...
+ * etc/bench.pl.in: ... this new file. Use @abs_top_builddir@ to invoke
+ "tests/bison" from the build directory by default rather than just
+ invoking "bison" from $PATH.
+ (calc_grammar): Update push parser code: don't declare yylval globally,
+ don't define yyparse_wrapper, and don't #define yyparse.
+ (bench_grammar): Update to check all working combinations of yacc.c,
+ push.c, impure, pure, pull, and push.
+
+2006-12-25 Joel E. Denny <jdenny@ces.clemson.edu>
+
+ For push mode, add pull wrappers around yypush_parse.
+ * data/push.c: (b4_generate_macro_args, b4_parenthesize): New macros.
+ (yypull_parse): New function wrapping yypush_parse.
+ (yyparse): New #define wrapping yypull_parse.
+ * tests/calc.at (_AT_DATA_CALC_Y): Call yyparse even when %push-parser
+ is declared.
+ * tests/headers.at (export YYLTYPE): Make yylex global. For push mode,
+ prototype yylex in the module that calls yyparse, and don't prototype
+ yyparse there. Otherwise, the yyparse expansion won't compile.
+ * tests/input.at (Torturing the Scanner): Likewise.
+
+2006-12-25 Joel E. Denny <jdenny@ces.clemson.edu>
+
+ Enable push parsers to operate in impure mode. Thus, %push-parser no
+ longer implies %pure-parser. The point of this change is to move
+ towards being able to test the push parser code by running the entire
+ test suite as if %push-parser had been declared.
+ * data/push.c (yypush_parse): For impure mode, remove the
+ yypushed_char, yypushed_val, and yypushed_loc arguments.
+ Instead, declare these as local variables initialized to the global
+ yychar, yylval, and yylloc.
+ For the first yypush_parse invocation only, restore the initial values
+ of these global variables when it's time to read a token since they
+ have been overwritten.
+ * src/parse-gram.y (prologue_declaration): Don't set pure_parser for
+ %push-parser.
+ * tests/calc.at (Simple LALR(1) Calculator): Always declare
+ %pure-parser along with %push-parser since this test case was designed
+ for pure push parsers.
+ * tests/local.at (AT_PURE_OR_PUSH_IF): Remove unused.
+ (AT_YACC_OR_PUSH_IF): New.
+ (AT_YYERROR_SEES_LOC_IF): Fix enough that the test suite passes, but
+ add a note that it's still wrong for some cases (as it has been for a
+ while).
+ (AT_PURE_LEX_IF): Use AT_PURE_IF instead of AT_PURE_OR_PUSH_IF since
+ %push-parser no longer implies %pure-parser.
+
+2006-12-20 Joel E. Denny <jdenny@ces.clemson.edu>
+
+ Remove some unnecessary differences between the pull parser code and
+ the push parser code. This patch enables yynerrs in push mode.
+ * data/push.c: Reformat M4 a little.
+ (b4_yyerror_range): Remove and convert all uses to just yyerror_range.
+ (b4_declare_scanner_communication_variables): Don't omit yynerrs just
+ because push mode is on. Instead, if pure mode is on, move yynerrs
+ to...
+ (b4_declare_parser_state_variables): ... here.
+ (yynerrs, yyerror_range): For push mode, #define each NAME in this list
+ to yyps->NAME so it can be used in yypush_parse.
+ (yypush_parse): Don't omit uses of yynerrs in push mode.
+
+2006-12-20 Joel E. Denny <jdenny@ces.clemson.edu>
+
+ Fix bug such that the first pushed token's value and location are
+ sometimes overwritten (sometimes by %initial-action) before being used.
+ * data/push.c (yypush_parse): Rename arguments yynchar, yynlval, and
+ yynlloc to yypushed_char, yypushed_val, and yypushed_loc for clarity.
+ For the first yypush_parse invocation, initialize yychar to YYEMPTY to
+ more closely mimic the pull parser logic.
+ Don't copy the pushed token to yychar, yylval, and yylloc until it's
+ time to read a token, which is after any initialization of yylval and
+ yylloc.
+ (gottoken): Rename label to...
+ (yyread_pushed_token): ... for clarity and to avoid infringing on the
+ user namespace.
+
+2006-12-20 Joel E. Denny <jdenny@ces.clemson.edu>
+
+ Rearrange initialization of the parser state variables so that the
+ skeleton doesn't have to have a copy for pull mode and another for push
+ mode. This patch also fixes at least a bug such that yylloc was not
+ initialized (with b4_location_initial_line and
+ b4_location_initial_column) upon calling yypush_parse. However, that
+ initialization now overwrites the first token's location;
+ %initial-action assigning @$ already did the same thing, and both bugs
+ will be fixed in a later patch.
+ * data/push.c (b4_yyssa): Remove and convert all uses to just yyssa.
+ (b4_declare_parser_state_variables): Remove initialization of yytoken,
+ yyss, yyvs, yyls, and yystacksize.
+ (yypstate_new): Remove initialization of some yypstate fields: yystate,
+ yyerrstatus, yytoken, yyss, yyvs, yyls, yystacksize, yyssp, yyvsp, and
+ yylsp.
+ (yyssa, yyvsa, yylsa): For push mode, #define each NAME in this list to
+ yyps->NAME so it can be used in yypush_parse.
+ (yyparse or yypush_parse): For yypush_parse, don't print the
+ "Starting parse" diagnostic for invocations after the first.
+ Add initialization of yytoken, yyss, yyvs, yyls, and yystacksize; for
+ yypush_parse, only do it for the first invocation.
+ Allow yystate, yyerrstatus, yyssp, yyvsp, yylsp, and yylloc
+ initialization to occur in yypush_parse but only on the first
+ invocation.
+
+2006-12-19 Joel E. Denny <jdenny@ces.clemson.edu>
+
+ * data/push.c: Add CPP guards around push parser declarations in both
+ the header and the code file.
+ In the code file, move the push parser declarations to the same place
+ they appear in the header file.
+ Clean up the M4 some, especially the inconsistent underquoting in
+ some b4_c_function_def and b4_c_function_decl uses.
+
+2006-12-19 Joel E. Denny <jdenny@ces.clemson.edu>
+
+ Encapsulate the push parser state variables into an M4 macro so the
+ push skeleton doesn't have to list them again for pull mode's yyparse.
+ For push mode, remove yypush_parse's local equivalents of these
+ variables to eliminate unnecessary copying between the two sets at
+ run-time. This patch also fixes at least a bug related to multiple
+ %initial-action invocations in push mode.
+ * data/push.c (b4_declare_parser_variables): Rename to...
+ (b4_declare_scanner_communication_variables): ... this for clarity and
+ update both uses.
+ (b4_declare_yyparse_variables): Remove and move its contents to the one
+ spot where it was invoked.
+ (b4_declare_parser_state_variables): New macro containing the parser
+ state variables required by push mode.
+ (struct yypstate): Replace all fields but yynew with
+ b4_declare_parser_state_variables.
+ (yystate, yyn, yyresult, yyerrstatus, yytoken, yyss, yyssp, yyvs,
+ yyvsp, yyls, yylsp, yystacksize, yyval, yyloc): For push mode, #define
+ each NAME in this list to yyps->NAME so it can be used in yypush_parse.
+ (yyparse or yypush_parse): For yyparse in pull mode, replace local
+ parser state variable declarations with
+ b4_declare_parser_state_variables.
+ Don't initialize parser state variables when calling yypush_parse since
+ yypstate_new already does that.
+ Invoke the user's initial action only upon the first yypush_parse
+ invocation.
+ Remove all code that copies between the local parser state variables
+ and the yypstate.
+
+2006-12-19 Joel E. Denny <jdenny@ces.clemson.edu>
+
+ * data/push.c (union yyalloc): Rename yyss, yyvs, and yyls fields to
+ prevent a name collision in a future patch where these names will
+ sometimes be #define'd.
+ (YYSTACK_RELOCATE): Add an argument to select a union yyalloc field
+ since it no longer has the same name as the existing argument.
+ (yyparse or yypush_parse): Update all uses of YYSTACK_RELOCATE.
+
+2006-12-19 Paolo Bonzini <bonzini@gnu.org>
+ and Joel E. Denny <jdenny@ces.clemson.edu>
+
+ * doc/bison.texinfo (Decl Summary): In the %language entry, mention
+ that the argument is case-insensitive, and there's no `=' here.
+ For the %skeleton entry, mention that %language is better.
+ (Bison Options): Likewise for --language and --skeleton. Move the
+ --skeleton entry so that the `Tuning the parser' section is sorted
+ alphabetically on long options.
+ (C++ Bison Interface): Don't use the word skeleton. Don't explain the
+ %language directive in detail here; cross-reference the %language
+ documentation instead.
+ (Calc++ Parser): Use `%require "@value{VERSION}"' rather than
+ `%require "2.3b"' so that the example is always up-to-date.
+ (Bison Symbols): Add entries for %language and %skeleton.
+ * examples/extexi (normalize): Instead of replacing every %require
+ argument with the current Bison version, just substitute for
+ `@value{VERSION}'. This guarantees that we're testing what actually
+ appears in the documentation.
+ * examples/calc++/Makefile.am ($(calc_extracted)): Use `$(VERSION)'
+ rather than `@VERSION@'.
+
+2006-12-18 Paul Eggert <eggert@cs.ucla.edu>
+
+ * NEWS: Reword the %language news a bit, and put it earlier.
+
+ * src/getargs.c (skeleton_arg): Last arg is now location const *.
+ Rewrite to simplify the logic.
+ (language_argmatch): Likewise.
+ (program_name): We now own this var.
+ * src/getargs.h (struct bison_language): Use char[] rather than
+ const char *.
+
+ * doc/bison.texinfo (Decl Summary, Bison Options): Don't claim
+ Java is supported.
+ * src/complain.c (program_name): Remove decl; no longer needed.
+ * src/main.c (program_name): Remove; now belongs to getargs.
+
+2006-12-18 Paolo Bonzini <bonzini@gnu.org>
+
+ * NEWS: Document %language.
+
+ * data/Makefile.am (dist_pkgdata_DATA): Add c-skel.m4, c++-skel.m4.
+
+ * data/c-skel.m4, data/c++-skel.m4: New files.
+ * data/glr.c: Complain on push parsers.
+
+ * doc/bison.texinfo (C++ Parser Interface): Prefer %language
+ over %skeleton.
+ (Directives): Document %language and %skeleton.
+ (Command line): Document -L.
+
+ * examples/extexi: Rewrite %require directive.
+ * examples/calc++/Makefile.am: Pass VERSION to extexi.
+
+ * src/files.c (compute_exts_from_gc): Look in language structure
+ for .y extension.
+ (compute_file_name_parts): Check whether .tab should be added.
+ * src/getargs.c (valid_languages, skeleton_prio, language_prio):
+ (language, skeleton_arg, language_argmatch): New.
+ (long_options): Add --language.
+ (getargs): Use skeleton_arg, add -L/--language.
+ * src/getargs.h: Include location.h.
+ (struct bison_language, language, skeleton_arg, language_argmatch): New.
+ * src/output.c (prepare): Pick default skeleton from struct language.
+ Don't dispatch C skeletons here.
+ * src/parse-gram.y (PERCENT_LANGUAGE): New.
+ (prologue_declaration): Add "%language" rule, use skeleton_arg.
+ * src/scan-gram.l ("%language"): New rule.
+
+ * tests/calc.at: Test %skeleton and %language.
+ * tests/local.at (AT_SKEL_CC_IF): Look for %language.
+ (AT_GLR_IF): Look for %skeleton "glr.cc".
+ (AT_LALR1_CC_IF, AT_GLR_CC_IF): Rewrite.
+ (AT_YACC_IF): Reject %language.
+
+2006-12-18 Paul Eggert <eggert@cs.ucla.edu>
+
+ * src/symtab.h (struct semantic_type): Remove the tag 'semantic_type',
+ since it wasn't used; only the typedef name 'semantic_type' is needed.
+ Also, omit trailing white space.
+
+ * bootstrap: Sync from coreutils.
+ (gnulib_extra_files): Add build-aux/announce.gen.
+ (slurp): Adjust .gitignore files like .cvsignore files.
+ * build-aux/announce-gen: Remove from CVS, since bootstrap
+ now creates this.
+
+2006-12-16 Joel E. Denny <jdenny@ces.clemson.edu>
+
+ Make %push-parser imply %pure-parser. This fixes several bugs; see
+ <http://lists.gnu.org/archive/html/bison-patches/2006-12/msg00148.html>.
+ * src/parse-gram.y (prologue_declaration): For %push-parser, also set
+ pure_parser = true.
+ * data/push.c: Don't bother testing b4_push_if when deciding whether
+ to expand b4_declare_parser_variables globally.
+ (yypush_parse): Likewise in here.
+
+ * data/push.c (yypush_parse): Add b4_parse_param to arguments.
+ (yy_reduce_print): Reformat M4 for readability.
+
+2006-12-15 Bob Rossi <bob@brasko.net>
+ and Joel Denny <jdenny@ces.clemson.edu>
+
+ * data/push.c (yypstate): Add typedef, and update all uses of
+ struct yypstate to just yypstate.
+ * tests/calc.at (_AT_DATA_CALC_Y): Update here as well.
+
+2006-12-14 Bob Rossi <bob@brasko.net>
+
+ * data/push.c (yypush_parse): Declare prototype regardless of
+ %locations option.
+
+2006-12-14 Bob Rossi <bob@brasko.net>
+
+ * data/push.c (yyparse): Remove the prototype and the #define when in
+ push-parser mode.
+
+2006-12-13 Bob Rossi <bob@brasko.net>
+
+ * data/push.c (yypstate_init): Rename to...
+ (yypstate_new): ... this and use b4_c_function_def.
+ (yypstate_delete): New.
+ (yypush_parse): Change parameters yynval and yynlloc to be const.
+ * tests/calc.at (_AT_DATA_CALC_Y): Use new yypstate_new and
+ yypstate_delete functions.
+
+2006-12-13 Joel E. Denny <jdenny@ces.clemson.edu>
+
+ * configure.ac (AC_PREREQ): Require Autoconf 2.61 because of our
+ strange test case titles. Reported by Bob Rossi.
+
+2006-12-13 Paul Eggert <eggert@cs.ucla.edu>
+
+ * TODO: Add pointer to Sylvain Schmitz's work on static detection
+ of potential ambiguities in GLR grammers.
+
+2006-12-12 Joel E. Denny <jdenny@ces.clemson.edu>
+
+ * tests/testsuite.at (AT_CHECK): When checking if $1 starts with
+ `bison ', use m4_index instead of m4_substr since chopping up a string
+ containing M4-special characters causes problems here.
+
+ Fix a couple of bugs related to special characters in user-specified
+ file names, and make it easier for skeletons to compute output file
+ names with the same file name prefix as Bison-computed output file
+ names.
+ * data/glr.cc, data/push.c, data/yacc.c: In @output, use
+ b4_parser_file_name and b4_spec_defines_file instead of
+ @output_parser_name@ and @output_header_name@, which are now redundant.
+ * data/glr.c, data/lalr1.cc: Likewise. Also, in header #include's, use
+ b4_parser_file_name, b4_spec_defines_file, and the new
+ @basename(FILENAME@) instead of @output_parser_name@ and
+ @output_header_name@, which inappropriately escaped the file names as
+ C string literals.
+ * src/files.c (all_but_ext): Remove static qualifier.
+ (compute_output_file_names): Move `free (all_but_ext)' to...
+ (output_file_names_free): ... here since all_but_ext is needed later.
+ * src/files.h (all_but_ext): Extern.
+ * src/muscle_tab.h (MUSCLE_INSERT_STRING_RAW): New macro that does
+ exactly what MUSCLE_INSERT_STRING used to do.
+ (MUSCLE_INSERT_STRING): Use MUSCLE_OBSTACK_SGROW so that M4-special
+ characters are escaped properly.
+ * src/output.c (prepare): Define muscle file_name_all_but_ext as
+ all_but_ext.
+ For pkgdatadir muscle, maintain previous functionality by using
+ MUSCLE_INSERT_STRING_RAW instead of MUSCLE_INSERT_STRING. The problem
+ is that b4_pkgdatadir is used inside m4_include in the skeletons, so
+ digraphs would never be expanded. Hopefully no one has M4-special
+ characters in his Bison installation path.
+ * src/scan-skel.l: Don't parse @output_header_name@ and
+ @output_parser_name@ anymore since they're now redundant.
+ In @output, use decode_at_digraphs.
+ Parse a new @basename command that invokes last_component.
+ (decode_at_digraphs): New.
+ (BASE_QPUTS): Remove unused.
+ * tests/output.at (AT_CHECK_OUTPUT_FILE_NAME): New macro.
+ (Output file name): New tests.
+
+2006-12-09 Joel E. Denny <jdenny@ces.clemson.edu>
+
+ Warn about output files that are generated by the skeletons and that
+ conflict with other output files.
+ * data/glr.c: Don't generate the header file here when glr.cc does.
+ * src/files.c (file_names, file_names_count): New static globals.
+ (compute_output_file_names): Invoke output_file_name_check for files
+ not generated by the skeletons and remove existing checks.
+ (output_file_name_check): New function that warns about conflicting
+ output file names.
+ (output_file_names_free): Free file_names.
+ * src/files.h (output_file_name_check): Declare.
+ * src/scan-skel.l: Invoke output_file_name_check for files generated by
+ the skeletons.
+ * tests/output.at (AT_CHECK_CONFLICTING_OUTPUT): New.
+ (Conflicting output files): New tests.
+
+2006-12-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+ * doc/bison.texinfo: Fix a couple of typos.
+
+2006-12-08 Bob Rossi <bob@brasko.net>
+
+ * data/push.c: (yypvarsinit, yypvars, struct yypvars, yypushparse):
+ Rename to...
+ (yypstate_init, yypstate, struct yypstate, yypush_parse): ... these and
+ update all uses.
+ (b4_yyssa, b4_yyerror_range, yypstate_init): Rename pv to yyps.
+ (yypush_parse): Rename yypvars argument to yyps and remove redundant
+ local pv.
+ (yypstate_init, yypush_parse): Declare in Bison-generated header file.
+ * tests/calc.at (_AT_DATA_CALC_Y): Use newly named functions.
+
+2006-12-07 Bob Rossi <bob@brasko.net>
+ and Joel Denny <jdenny@ces.clemson.edu>
+
+ * data/push.c (yypvarsinit): Change return type from void* to struct
+ yypvars*. No longer cast to void* on return.
+ (struct yypvars): Remove yylen since it need not be remembered between
+ yypushparse invocations.
+ (yypushparse): Don't copy between yylen and pv->yylen.
+
+2006-12-05 Bob Rossi <bob@brasko.net>
+
+ * data/push.c (yychar_set, yylval_set, yylloc_set): Delete.
+ (yypushparse): Add yynchar, yynlval, yynlloc parameters.
+ (b4_declare_parser_variables): Do not declare yynerrs for push mode.
+ (struct yypvars): Remove b4_declare_parser_variables.
+ (yypvarsinit): Remove init code for removed variables.
+ (global scope): Do not declare b4_declare_parser_variables if
+ push or pure mode.
+ (yypushparse): Add b4_declare_parser_variables.
+ Init new local variables, and remove init code for removed
+ yypvars variables.
+ (yyparse): Delete.
+ * tests/calc.at (_AT_DATA_CALC_Y): Call yypushparse for push mode
+ and yyparse for other modes.
+ (AT_CHECK_CALC_LALR): Added '%skeleton "push.c"' for push tests.
+ * tests/local.at (AT_PUSH_IF, AT_PURE_OR_PUSH_IF): Added.
+ (AT_YYERROR_SEES_LOC_IF): push-parser makes this false.
+ (AT_PURE_LEX_IF): True if pure or push parser.
+
+2006-12-05 Joel E. Denny <jdenny@ces.clemson.edu>
+
+ Document Yacc prologue alternatives and default %destructor's and
+ %printer's as experimental. Don't mention Java yet. Discussed at
+ <http://lists.gnu.org/archive/html/bison-patches/2006-12/msg00002.html>.
+ * NEWS (2.3a+): Say they're experimental. Remove any mention of Java.
+ (2.3a): Annotate this entry to say the old forms of these features were
+ also experimental.
+ * doc/bison.texinfo (Prologue Alternatives, Freeing Discarded Symbols,
+ Bison Symbols): Say they're experimental. Comment out any mention
+ of Java (we'll want this back eventually).
+
+2006-12-01 Joel E. Denny <jdenny@ces.clemson.edu>
+
+ Support a file name argument to %defines. Deprecate `=' in
+ %file-prefix, %name-prefix, and %output. Discussed at
+ <http://lists.gnu.org/archive/html/help-bison/2006-09/msg00001.html>.
+ * NEWS (2.3a+): Mention.
+ * doc/bison.texinfo (Decl Summary, Bison Symbols): Add entry for new
+ form of %defines, and remove `=' from entries for %file-prefix,
+ %name-prefix, and %output.
+ * src/parse-gram.y (prologue_declaration): Implement.
+ * tests/calc.at (Simple LALR Calculator, Simple GLR Calculator, Simple
+ LALR1 C++ Calculator, Simple GLR C++ Calculator): Remove the `=' from
+ all but one occurrence of %name-prefix.
+ * tests/headers.at (export YYLTYPE): Remove the `=' from %name-prefix.
+ * tests/local.at (_AT_BISON_OPTION_PUSHDEFS): Likewise.
+ * tests/output.at (AT_CHECK_OUTPUT): Remove the `=' from all but one
+ occurrence of each of %file-prefix and %output. Add check for %defines
+ with argument.
+ * tests/reduce.at (Useless Terminals, Useless Nonterminals,
+ Useless Rules, Reduced Automaton, Underivable Rules, Empty Language):
+ Remove the `=' from %output.
+
+2006-11-21 Joel E. Denny <jdenny@ces.clemson.edu>
+
+ Don't escape $ in test case titles since Autoconf 2.61 now does that
+ correctly.
+ * tests/actions.at (Default %printer and %destructor are not for error
+ or $undefined): Here.
+ (Default %printer and %destructor are not for $accept): Here.
+ * tests/input.at (Invalid $n and @n): Here.
+
+2006-11-20 Joel E. Denny <jdenny@ces.clemson.edu>
+
+ Rename <!> to <>. Discussed starting at
+ <http://lists.gnu.org/archive/html/bison-patches/2006-11/msg00039.html>.
+ * NEWS (2.3a+): Update.
+ * doc/bison.texinfo (Freeing Discarded Symbols, Bison Symbols):
+ Update.
+ * src/parse-gram.y (TYPE_TAG_NONE, generic_symlist_item): Implement.
+ * src/scan-gram.l (INITIAL): Implement.
+ * src/symlist.c (symbol_list_default_tagless_new): Update comment.
+ * src/symlist.h (symbol_list, symbol_list_default_tagless_new): Update
+ comment.
+ * tests/actions.at (Default tagless %printer and %destructor,
+ Default tagged and per-type %printer and %destructor,
+ Default %printer and %destructor are not for error or $undefined,
+ Default %printer and %destructor are not for $accept,
+ Default %printer and %destructor for mid-rule values): Update.
+ * tests/input.at (Default %printer and %destructor redeclared,
+ Unused values with default %destructor): Update.
+
+2006-11-17 Joel E. Denny <jdenny@ces.clemson.edu>
+
+ Don't let %prec take a nonterminal.
+ * src/reader.c (grammar_current_rule_prec_set): Make the %prec symbol a
+ token.
+ * tests/input.at (%prec takes a token): New test checking that %prec
+ won't take a nonterminal.
+
+2006-11-10 Joel E. Denny <jdenny@ces.clemson.edu>
+
+ * tests/testsuite.at (AT_CHECK): Don't miss an exit value of 0 because
+ it was double-quoted.
+ * src/Makefile.am (YACC): Use --warnings=all,error so that Bison's own
+ grammar is maintained with Bison's highest standards.
+ * src/getargs.c: Fix some typos in Doxygen comments.
+
+2006-11-10 Joel E. Denny <jdenny@ces.clemson.edu>
+
+ Fix memory leaks in scanners generated by at least Flex 2.5.9 and
+ later. Reported by Paul Eggert in
+ <http://lists.gnu.org/archive/html/bison-patches/2006-11/msg00014.html>.
+ * src/flex-scanner.h (yylex_destroy): Define for Flex before 2.5.9.
+ * src/scan-code.l (translate_action): Don't bother invoking
+ yy_delete_buffer (YY_CURRENT_BUFFER) before creating the first buffer.
+ (code_scanner_free): Instead of invoking
+ yy_delete_buffer (YY_CURRENT_BUFFER) directly, invoke yylex_destroy,
+ which frees more.
+ * src/scan-gram.l (gram_scanner_free): Likewise.
+ * src/scan-skel.l (scan_skel): Likewise.
+
+2006-11-09 Joel E. Denny <jdenny@ces.clemson.edu>
+
+ * src/files.c (tr): Change return type to void.
+ * src/muscle_tab.c (muscle_insert): Free storage in case muscle_grow
+ has been called previously for the same key.
+ (muscle_find): Return storage instead of value so that
+ --enable-gcc-warnings doesn't produce warnings that the return discards
+ const. aver that the value and storage are the same since storage
+ could potentially be NULL when value is not.
+ * tests/testsuite.at (AT_CHECK): Treat an unspecified exit value the
+ same as 0.
+
+2006-11-08 Paul Eggert <eggert@cs.ucla.edu>
+
+ * bootstrap.conf (excluded_files): Exclude m4/codeset.m4 (undoing
+ the earlier change today), m4/intl.m4, m4/intldir.m4. This gives
+ us a slightly cleaner distribution, and also works.
+ * m4/.cvsignore: Add inline.m4, wint_t.m4 to accommodate recent
+ gnulib changes.
+
+2006-11-08 Joel E. Denny <jdenny@ces.clemson.edu>
+ and Paul Eggert <eggert@cs.ucla.edu>
+
+ Don't let Bison leak memory except when it complains.
+ * src/files.h (parser_file_name, spec_verbose_file, spec_graph_file):
+ (spec_defines_file, dir_prefix): Now char *, not const char *,
+ since they are freed.
+ * src/files.c: Likewise.
+ (all_but_ext, all_but_tab_ext, src_extension, header_extension):
+ Likewise.
+ (tr): Now operates in-place. All uses changed.
+ (compute_exts_from_gf, compute_exts_from_src): Don't leak temporary
+ values.
+ (compute_file_name_parts, compute_output_file_names): Don't store
+ read-only data in variables that will be freed.
+ (compute_output_file_names): Free all_but_ext, all_but_tab_ext,
+ src_extension, and header_extension.
+ (output_file_names_free): New public function to free
+ spec_verbose_file, spec_graph_file, spec_defines_file,
+ parser_file_name, and dir_prefix.
+ * src/getargs.c (getargs): Don't store read-only data in variables that
+ will be freed.
+ * src/main.c (main): Invoke output_file_names_free, code_scanner_free
+ (which previously existed but was unused), and quotearg_free.
+ * src/muscle_tab.h (muscle_insert): value arg is now a `char const *'.
+ * src/muscle_tab.c: Likewise.
+ (muscle_entry): Make the value char const *,
+ and add a new storage member that is char * and can be freed.
+ (muscle_entry_free): New private function.
+ (muscle_init): Use it instead of free.
+ (muscle_insert, muscle_grow): Update and use new storage member.
+ (muscle_code_grow): Free the string passed to muscle_grow
+ since it's not needed anymore.
+ * src/parse-gram.y (%union): Make `chars' member a `char const *', and
+ add a new `char *code' member.
+ ("{...}"): Declare semantic type as code.
+ * src/scan-code.h (translate_rule_action):
+ (translate_symbol_action, translate_code, translate_action): Return
+ `char const *' rather than `char *' since external code should not free
+ these strings.
+ * src/scan-code.l: Likewise.
+ * src/scan-gram.l (<SC_BRACED_CODE>): Use val->code for BRACED_CODE,
+ which is "{...}" in the parser.
+ * tests/Makefile.am (maintainer-check-valgrind): Set
+ VALGRIND_OPTS='--leak-check=full --show-reacheable=yes' before invoking
+ Valgrind.
+ * tests/calc.at (_AT_DATA_CALC_Y): fclose the FILE* so Valgrind doesn't
+ complain.
+ * tests/testsuite.at (AT_CHECK): Redefine so that running Bison and
+ expecting a non-zero exit status sets --leak-check=summary and
+ --show-reachable=no for Valgrind. Bison unabashedly leaks memory in
+ this case, and we don't want to hear about it.
+
2006-11-08 Paul Eggert <eggert@cs.ucla.edu>
* bootstrap (runtime-po/Makevars): Derive from po/Makevars
* doc/bison.texinfo (Freeing Discarded Symbols): Document this and the
previous change today related to mid-rules.
(Bison Symbols): Remove %symbol-default and add <*> and <!>.
- * src/parser-gram.y (PERCENT_SYMBOL_DEFAULT): Remove.
+ * src/parse-gram.y (PERCENT_SYMBOL_DEFAULT): Remove.
(TYPE_TAG_ANY): Add as <*>.
(TYPE_TAG_NONE): Add as <!>.
(generic_symlist_item): Remove RHS for %symbol-default and add RHS's
-----
Copyright (C) 1987, 1988, 1991, 1992, 1993, 1994, 1995, 1996,
- 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free
- Software Foundation, Inc.
+ 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
+ Free Software Foundation, Inc.
Copying and distribution of this file, with or without
modification, are permitted provided the copyright notice and this
projects / bison.git / blobdiff