# ------------------------- #
-# _AT_DATA_CALC_Y($1, $2, $3, [CPP-DIRECTIVES])
-# ---------------------------------------------
+# _AT_DATA_CALC_Y($1, $2, $3, [BISON-DIRECTIVES])
+# -----------------------------------------------
# Produce `calc.y'. Don't call this macro directly, because it contains
# some occurrences of `$1' etc. which will be interpreted by m4. So
# you should call it with $1, $2, and $3 as arguments, which is what
m4_define([_AT_DATA_CALC_Y],
[m4_if([$1$2$3], $[1]$[2]$[3], [],
[m4_fatal([$0: Invalid arguments: $@])])dnl
-AT_DATA([calc.y],
+AT_DATA_GRAMMAR([calc.y],
[[/* Infix notation calculator--calc */
-
+]$4[
%{
-#include <config.h>
-/* We don't need perfect functions for these tests. */
-#undef malloc
-#undef memcmp
-#undef realloc
#include <stdio.h>
#if STDC_HEADERS
%}
-%parse-param "value_t *result", "result"
-%parse-param "int *count", "count"
-
/* Exercise %union. */
%union
{
# define VAL (yylval)
#endif
+#define YYLLOC_FORMAL ]AT_LOCATION_IF([, YYLTYPE *yylloc])[
+#define YYLLOC_ARG ]AT_LOCATION_IF([, yylloc])[
+#define USE_YYLLOC ]AT_LOCATION_IF([(void) yylloc;])[
+
#if YYPURE
-# if YYLSP_NEEDED
-# define LEX_FORMALS YYSTYPE *yylval, YYLTYPE *yylloc
-# define LEX_ARGS yylval, yylloc
-# define USE_LEX_ARGS (void) yylval; (void) yylloc;
-# else
-# define LEX_FORMALS YYSTYPE *yylval
-# define LEX_ARGS yylval
-# define USE_LEX_ARGS (void) yylval
-# endif
+# define LEX_FORMALS YYSTYPE *yylval YYLLOC_FORMAL
+# define LEX_ARGS yylval YYLLOC_ARG
+# define USE_LEX_ARGS (void) yylval; USE_YYLLOC
# define LEX_PRE_FORMALS LEX_FORMALS,
# define LEX_PRE_ARGS LEX_ARGS,
#else
#endif
static int power (int base, int exponent);
-static void yyerror (const char *s);
+/* yyerror receives the location if:
+ - %location & %pure & %glr
+ - %location & %pure & %yacc & %parse-param. */
+static void yyerror (]AT_YYERROR_ARG_LOC_IF([YYLTYPE *yylloc, ])[
+ ]AT_PARAM_IF([value_t *result, int *count, ])[
+ const char *s
+ );
static int yylex (LEX_FORMALS);
static int yygetc (LEX_FORMALS);
static void yyungetc (LEX_PRE_FORMALS int c);
%left NEG /* negation--unary minus */
%right '^' /* exponentiation */
-]$4[
-
/* Grammar follows */
%%
input:
line
-| input line { ++*count; ++global_count; }
+| input line { ]AT_PARAM_IF([++*count; ++global_count;])[ }
;
line:
'\n'
-| exp '\n' { *result = global_result = $1; }
+| exp '\n' { ]AT_PARAM_IF([*result = global_result = $1;])[ }
;
exp:
NUM { $$ = $1; }
| exp '=' exp
{
- if ($1 != $3)
- fprintf (stderr, "calc: error: %d != %d\n", $1, $3);
- $$ = $1;
+ if ($1 != $3)
+ fprintf (stderr, "calc: error: %d != %d\n", $1, $3);
+ $$ = $1;
}
| exp '+' exp { $$ = $1 + $3; }
| exp '-' exp { $$ = $1 - $3; }
FILE *yyin;
static void
-yyerror (const char *s)
+yyerror (]AT_YYERROR_ARG_LOC_IF([YYLTYPE *yylloc, ])[
+ ]AT_PARAM_IF([value_t *result, int *count, ])[
+ const char *s
+ )
{
-#if YYLSP_NEEDED
+]AT_PARAM_IF([(void) result; (void) count; ])[
+]AT_YYERROR_SEES_LOC_IF([
fprintf (stderr, "%d.%d-%d.%d: ",
LOC.first_line, LOC.first_column,
LOC.last_line, LOC.last_column);
-#endif
+])[
fprintf (stderr, "%s\n", s);
}
-#if YYLSP_NEEDED
+]AT_LOCATION_IF([
static YYLTYPE last_yylloc;
-#endif
+])[
static int
yygetc (LEX_FORMALS)
{
int res = getc (yyin);
USE_LEX_ARGS;
-#if YYLSP_NEEDED
+]AT_LOCATION_IF([
last_yylloc = LOC;
if (res == '\n')
{
}
else
LOC.last_column++;
-#endif
+])[
return res;
}
yyungetc (LEX_PRE_FORMALS int c)
{
USE_LEX_ARGS;
-#if YYLSP_NEEDED
+]AT_LOCATION_IF([
/* Wrong when C == `\n'. */
LOC = last_yylloc;
-#endif
+])[
ungetc (c, yyin);
}
if (init)
{
init = 0;
-#if YYLSP_NEEDED
+]AT_LOCATION_IF([
LOC.last_column = 1;
LOC.last_line = 1;
-#endif
+])[
}
-#if YYLSP_NEEDED
+]AT_LOCATION_IF([
LOC.first_column = LOC.last_column;
LOC.first_line = LOC.last_line;
-#endif
+])[
/* Skip white space. */
while ((c = yygetc (LEX_ARGS)) == ' ' || c == '\t')
{
-#if YYLSP_NEEDED
+]AT_LOCATION_IF([
LOC.first_column = LOC.last_column;
LOC.first_line = LOC.last_line;
-#endif
+])[
}
/* process numbers */
{
value_t result = 0;
int count = 0;
+ int status = 0;
yyin = NULL;
if (argc == 2)
#if YYDEBUG
yydebug = 1;
#endif
- yyparse (&result, &count);
+ status = yyparse (]AT_PARAM_IF([&result, &count])[);
assert (global_result == result);
assert (global_count == count);
-
- return 0;
+ return status;
}
]])
])# _AT_DATA_CALC_Y
])
-# _AT_CHECK_CALC_ERROR(BISON-OPTIONS, INPUT, [NUM-DEBUG-LINES],
-# [ERROR-LOCATION], [IF-YYERROR-VERBOSE])
-# ------------------------------------------------------------
-# Run `calc' on INPUT, and expect a `parse error' message.
+# _AT_CHECK_CALC_ERROR(BISON-OPTIONS, EXIT-STATUS, INPUT,
+# [NUM-DEBUG-LINES],
+# [VERBOSE-AND-LOCATED-ERROR-MESSAGE])
+# ---------------------------------------------------------
+# Run `calc' on INPUT, and expect a `syntax error' message.
#
# If INPUT starts with a slash, it is used as absolute input file name,
# otherwise as contents.
# is correctly output on stderr.
#
# If BISON-OPTIONS contains `%error-verbose', then make sure the
-# IF-YYERROR-VERBOSE message is properly output after `parse error, '
+# IF-YYERROR-VERBOSE message is properly output after `syntax error, '
# on STDERR.
#
# If BISON-OPTIONS contains `%debug' but not `%glr', then NUM-STDERR-LINES
# is the number of expected lines on stderr.
m4_define([_AT_CHECK_CALC_ERROR],
-[m4_bmatch([$2], [^/],
- [AT_PARSER_CHECK([./calc $2], 0, [], [stderr])],
+[m4_bmatch([$3], [^/],
+ [AT_PARSER_CHECK([./calc $3], $2, [], [stderr])],
[AT_DATA([[input]],
-[[$2
+[[$3
]])
-AT_PARSER_CHECK([./calc input], 0, [], [stderr])])
+AT_PARSER_CHECK([./calc input], $2, [], [stderr])])
m4_bmatch([$1],
[%debug.*%glr\|%glr.*%debug],
[],
[%debug],
- [AT_CHECK([wc -l <stderr | sed 's/[[^0-9]]//g'], 0, [$3
+ [AT_CHECK([wc -l <stderr | sed 's/[[^0-9]]//g'], 0, [$4
])])
# Normalize the observed and expected error messages, depending upon the
mv at-stderr stderr
# 2. Create the reference error message.
AT_DATA([[expout]],
-[$4
+[$5
])
# 3. If locations are not used, remove them.
-m4_bmatch([$1], [%locations], [],
+AT_YYERROR_SEES_LOC_IF([],
[[sed 's/^[-0-9.]*: //' expout >at-expout
mv at-expout expout]])
# 4. If error-verbose is not used, strip the`, unexpected....' part.
m4_bmatch([$1], [%error-verbose], [],
-[[sed 's/parse error, .*$/parse error/' expout >at-expout
+[[sed 's/syntax error, .*$/syntax error/' expout >at-expout
mv at-expout expout]])
# 5. Check
AT_CHECK([cat stderr], 0, [expout])
])
+# AT_CALC_PUSHDEFS($1, $2, [BISON-OPTIONS])
+# -----------------------------------------
+# This macro works around the impossibility to define macros
+# inside macros, because issuing `[$1]' is not possible in M4 :(.
+# This sucks hard, GNU M4 should really provide M5 like $$1.
+m4_define([AT_CHECK_PUSHDEFS],
+[m4_if([$1$2], $[1]$[2], [],
+ [m4_fatal([$0: Invalid arguments: $@])])dnl
+m4_pushdef([AT_PARAM_IF],
+[m4_bmatch([$3], [%parse-param], [$1], [$2])])
+m4_pushdef([AT_LOCATION_IF],
+[m4_bmatch([$3], [%locations], [$1], [$2])])
+m4_pushdef([AT_PURE_IF],
+[m4_bmatch([$3], [%pure-parser], [$1], [$2])])
+m4_pushdef([AT_GLR_IF],
+[m4_bmatch([$3], [%glr-parser], [$1], [$2])])
+m4_pushdef([AT_PURE_AND_LOC_IF],
+[m4_bmatch([$3], [%locations.*%pure-parser\|%pure-parser.*%locations],
+ [$1], [$2])])
+m4_pushdef([AT_GLR_OR_PARAM_IF],
+[m4_bmatch([$3], [%glr-parser\|%parse-param], [$1], [$2])])
+
+# yyerror receives the location if %location & %pure & (%glr or %parse-param).
+m4_pushdef([AT_YYERROR_ARG_LOC_IF],
+[AT_GLR_OR_PARAM_IF([AT_PURE_AND_LOC_IF([$1], [$2])],
+ [$2])])
+# yyerror cannot see the locations if !glr & pure & !param.
+m4_pushdef([AT_YYERROR_SEES_LOC_IF],
+[AT_LOCATION_IF([AT_GLR_IF([$1],
+ [AT_PURE_IF([AT_PARAM_IF([$1], [$2])],
+ [$1])])],
+ [$2])])
+])
+
+
+# AT_CALC_POPDEFS
+# ---------------
+m4_define([AT_CHECK_POPDEFS],
+[m4_popdef([AT_YYERROR_SEES_LOC_IF])
+m4_popdef([AT_YYERROR_ARG_LOC_IF])
+m4_popdef([AT_GLR_OR_PARAM_IF])
+m4_popdef([AT_PURE_AND_LOC_IF])
+m4_popdef([AT_GLR_IF])
+m4_popdef([AT_LOCATION_IF])
+m4_popdef([AT_PARAM_IF])
+])
+
+
+
# AT_CHECK_CALC([BISON-OPTIONS])
# ------------------------------
# Start a testing chunk which compiles `calc' grammar with
[# We use integers to avoid dependencies upon the precision of doubles.
AT_SETUP([Calculator $1])
+AT_CHECK_PUSHDEFS($[1], $[2], [$1])
+
AT_DATA_CALC_Y([$1])
# Specify the output files to avoid problems on different file systems.
(2^2)^3 = 64],
[486])
-# Some parse errors.
-_AT_CHECK_CALC_ERROR([$1], [0 0], [11],
- [1.3-1.4: parse error, unexpected "number"])
-_AT_CHECK_CALC_ERROR([$1], [1//2], [15],
- [1.3-1.4: parse error, unexpected '/', expecting "number" or '-' or '('])
-_AT_CHECK_CALC_ERROR([$1], [error], [4],
- [1.1-1.2: parse error, unexpected $undefined, expecting "number" or '-' or '\n' or '('])
-_AT_CHECK_CALC_ERROR([$1], [1 = 2 = 3], [22],
- [1.7-1.8: parse error, unexpected '='])
-_AT_CHECK_CALC_ERROR([$1],
+# Some syntax errors.
+_AT_CHECK_CALC_ERROR([$1], [1], [0 0], [11],
+ [1.3-1.4: syntax error, unexpected "number"])
+_AT_CHECK_CALC_ERROR([$1], [1], [1//2], [15],
+ [1.3-1.4: syntax error, unexpected '/', expecting "number" or '-' or '('])
+_AT_CHECK_CALC_ERROR([$1], [1], [error], [4],
+ [1.1-1.2: syntax error, unexpected $undefined, expecting "number" or '-' or '\n' or '('])
+_AT_CHECK_CALC_ERROR([$1], [1], [1 = 2 = 3], [22],
+ [1.7-1.8: syntax error, unexpected '='])
+_AT_CHECK_CALC_ERROR([$1], [1],
[
+1],
[14],
- [2.1-2.2: parse error, unexpected '+'])
+ [2.1-2.2: syntax error, unexpected '+'])
# Exercise error messages with EOF: work on an empty file.
-_AT_CHECK_CALC_ERROR([$1], [/dev/null], [4],
- [1.1-1.2: parse error, unexpected "end of input", expecting "number" or '-' or '\n' or '('])
+_AT_CHECK_CALC_ERROR([$1], [1], [/dev/null], [4],
+ [1.1-1.2: syntax error, unexpected "end of input", expecting "number" or '-' or '\n' or '('])
# Exercise the error token: without it, we die at the first error,
# hence be sure i. to have several errors, ii. to test the action
# associated to `error'.
-_AT_CHECK_CALC_ERROR([$1], [(1 ++ 2) + (0 0) = 1], [82],
-[1.5-1.6: parse error, unexpected '+', expecting "number" or '-' or '('
-1.15-1.16: parse error, unexpected "number"
+_AT_CHECK_CALC_ERROR([$1], [0], [(1 ++ 2) + (0 0) = 1], [82],
+[1.5-1.6: syntax error, unexpected '+', expecting "number" or '-' or '('
+1.15-1.16: syntax error, unexpected "number"
calc: error: 0 != 1])
+AT_CHECK_POPDEFS
+
AT_CLEANUP
])# AT_CHECK_CALC
AT_CHECK_CALC_LALR([%debug])
AT_CHECK_CALC_LALR([%error-verbose %debug %locations %defines %name-prefix="calc" %verbose %yacc])
-# AT_CHECK_CALC_LALR([%pure-parser %error-verbose %debug %locations %defines %name-prefix="calc" %verbose %yacc])
+AT_CHECK_CALC_LALR([%pure-parser %error-verbose %debug %locations %defines %name-prefix="calc" %verbose %yacc])
+
+AT_CHECK_CALC_LALR([%pure-parser %error-verbose %debug %locations %defines %name-prefix="calc" %verbose %yacc %parse-param {value_t *result}, {result} %parse-param {int *count}, {count}])
# ----------------------- #
AT_CHECK_CALC_GLR([%debug])
AT_CHECK_CALC_GLR([%error-verbose %debug %locations %defines %name-prefix="calc" %verbose %yacc])
-# AT_CHECK_CALC_GLR([%pure-parser %error-verbose %debug %locations %defines %name-prefix="calc" %verbose %yacc])
+AT_CHECK_CALC_GLR([%pure-parser %error-verbose %debug %locations %defines %name-prefix="calc" %verbose %yacc])
+
+AT_CHECK_CALC_GLR([%pure-parser %error-verbose %debug %locations %defines %name-prefix="calc" %verbose %yacc %parse-param {value_t *result}, {result} %parse-param {int *count}, {count}])
projects / bison.git / blobdiff