+ GNULIB_SRCDIR=$gnulib_path
+ ;;
+*)
+ # Use GNULIB_SRCDIR as a reference.
+ if test -d "$GNULIB_SRCDIR"/.git && \
+ git_modules_config submodule.gnulib.url >/dev/null; then
+ echo "$0: getting gnulib files..."
+ if git submodule -h|grep -- --reference > /dev/null; then
+ # Prefer the one-liner available in git 1.6.4 or newer.
+ git submodule update --init --reference "$GNULIB_SRCDIR" \
+ "$gnulib_path" || exit $?
+ else
+ # This fallback allows at least git 1.5.5.
+ if test -f "$gnulib_path"/gnulib-tool; then
+ # Since file already exists, assume submodule init already complete.
+ git submodule update || exit $?
+ else
+ # Older git can't clone into an empty directory.
+ rmdir "$gnulib_path" 2>/dev/null
+ git clone --reference "$GNULIB_SRCDIR" \
+ "$(git_modules_config submodule.gnulib.url)" "$gnulib_path" \
+ && git submodule init && git submodule update \
+ || exit $?
+ fi
+ fi
+ GNULIB_SRCDIR=$gnulib_path
+ fi
+ ;;
+esac
+
+if $bootstrap_sync; then
+ cmp -s "$0" "$GNULIB_SRCDIR/build-aux/bootstrap" || {
+ echo "$0: updating bootstrap and restarting..."
+ exec sh -c \
+ 'cp "$1" "$2" && shift && exec "${CONFIG_SHELL-/bin/sh}" "$@"' \
+ -- "$GNULIB_SRCDIR/build-aux/bootstrap" \
+ "$0" "$@" --no-bootstrap-sync
+ }
+fi
+
+gnulib_tool=$GNULIB_SRCDIR/gnulib-tool
+<$gnulib_tool || exit $?
+
+# Get translations.
+
+download_po_files() {
+ subdir=$1
+ domain=$2
+ echo "$me: getting translations into $subdir for $domain..."
+ cmd=$(printf "$po_download_command_format" "$domain" "$subdir")
+ eval "$cmd" && return
+ # Fallback to HTTP.
+ cmd=$(printf "$po_download_command_format2" "$subdir" "$domain")
+ eval "$cmd"
+}
+
+# Mirror .po files to $po_dir/.reference and copy only the new
+# or modified ones into $po_dir. Also update $po_dir/LINGUAS.
+# Note po files that exist locally only are left in $po_dir but will
+# not be included in LINGUAS and hence will not be distributed.
+update_po_files() {
+ # Directory containing primary .po files.
+ # Overwrite them only when we're sure a .po file is new.
+ po_dir=$1
+ domain=$2
+
+ # Mirror *.po files into this dir.
+ # Usually contains *.s1 checksum files.
+ ref_po_dir="$po_dir/.reference"
+
+ test -d $ref_po_dir || mkdir $ref_po_dir || return
+ download_po_files $ref_po_dir $domain \
+ && ls "$ref_po_dir"/*.po 2>/dev/null |
+ sed 's|.*/||; s|\.po$||' > "$po_dir/LINGUAS" || return
+
+ langs=$(cd $ref_po_dir && echo *.po | sed 's/\.po//g')
+ test "$langs" = '*' && langs=x
+ for po in $langs; do
+ case $po in x) continue;; esac
+ new_po="$ref_po_dir/$po.po"
+ cksum_file="$ref_po_dir/$po.s1"
+ if ! test -f "$cksum_file" ||
+ ! test -f "$po_dir/$po.po" ||
+ ! $SHA1SUM -c --status "$cksum_file" \
+ < "$new_po" > /dev/null; then
+ echo "$me: updated $po_dir/$po.po..."
+ cp "$new_po" "$po_dir/$po.po" \
+ && $SHA1SUM < "$new_po" > "$cksum_file"
+ fi
+ done
+}
+
+case $SKIP_PO in
+'')
+ if test -d po; then
+ update_po_files po $package || exit
+ fi
+
+ if test -d runtime-po; then
+ update_po_files runtime-po $package-runtime || exit
+ fi;;
+esac
+
+symlink_to_dir()
+{
+ src=$1/$2
+ dst=${3-$2}
+
+ test -f "$src" && {
+
+ # If the destination directory doesn't exist, create it.
+ # This is required at least for "lib/uniwidth/cjk.h".
+ dst_dir=$(dirname "$dst")
+ if ! test -d "$dst_dir"; then
+ mkdir -p "$dst_dir"
+
+ # If we've just created a directory like lib/uniwidth,
+ # tell version control system(s) it's ignorable.
+ # FIXME: for now, this does only one level
+ parent=$(dirname "$dst_dir")
+ for dot_ig in x $vc_ignore; do
+ test $dot_ig = x && continue
+ ig=$parent/$dot_ig
+ insert_vc_ignore $ig "${dst_dir##*/}"
+ done
+ fi
+
+ if $copy; then
+ {
+ test ! -h "$dst" || {
+ echo "$me: rm -f $dst" &&
+ rm -f "$dst"
+ }
+ } &&
+ test -f "$dst" &&
+ cmp -s "$src" "$dst" || {
+ echo "$me: cp -fp $src $dst" &&
+ cp -fp "$src" "$dst"
+ }
+ else
+ # Leave any existing symlink alone, if it already points to the source,
+ # so that broken build tools that care about symlink times
+ # aren't confused into doing unnecessary builds. Conversely, if the
+ # existing symlink's time stamp is older than the source, make it afresh,
+ # so that broken tools aren't confused into skipping needed builds. See
+ # <http://lists.gnu.org/archive/html/bug-gnulib/2011-05/msg00326.html>.
+ test -h "$dst" &&
+ src_ls=$(ls -diL "$src" 2>/dev/null) && set $src_ls && src_i=$1 &&
+ dst_ls=$(ls -diL "$dst" 2>/dev/null) && set $dst_ls && dst_i=$1 &&
+ test "$src_i" = "$dst_i" &&
+ both_ls=$(ls -dt "$src" "$dst") &&
+ test "X$both_ls" = "X$dst$nl$src" || {
+ dot_dots=
+ case $src in
+ /*) ;;
+ *)
+ case /$dst/ in
+ *//* | */../* | */./* | /*/*/*/*/*/)
+ die "invalid symlink calculation: $src -> $dst";;
+ /*/*/*/*/) dot_dots=../../../;;
+ /*/*/*/) dot_dots=../../;;
+ /*/*/) dot_dots=../;;
+ esac;;
+ esac
+
+ echo "$me: ln -fs $dot_dots$src $dst" &&
+ ln -fs "$dot_dots$src" "$dst"
+ }
+ fi
+ }
+}
+
+version_controlled_file() {
+ parent=$1
+ file=$2
+ if test -d .git; then
+ git rm -n "$file" > /dev/null 2>&1
+ elif test -d .svn; then
+ svn log -r HEAD "$file" > /dev/null 2>&1
+ elif test -d CVS; then
+ grep -F "/${file##*/}/" "$parent/CVS/Entries" 2>/dev/null |
+ grep '^/[^/]*/[0-9]' > /dev/null
+ else
+ warn_ "no version control for $file?"
+ false
+ fi
+}
+
+# NOTE: we have to be careful to run both autopoint and libtoolize
+# before gnulib-tool, since gnulib-tool is likely to provide newer
+# versions of files "installed" by these two programs.
+# Then, *after* gnulib-tool (see below), we have to be careful to
+# run autoreconf in such a way that it does not run either of these
+# two just-pre-run programs.
+
+# Import from gettext.
+with_gettext=yes
+grep '^[ ]*AM_GNU_GETTEXT_VERSION(' configure.ac >/dev/null || \
+ with_gettext=no
+
+if test $with_gettext = yes || test $use_libtool = 1; then
+
+ tempbase=.bootstrap$$
+ trap "rm -f $tempbase.0 $tempbase.1" 1 2 13 15
+
+ > $tempbase.0 > $tempbase.1 &&
+ find . ! -type d -print | sort > $tempbase.0 || exit
+
+ if test $with_gettext = yes; then
+ # Released autopoint has the tendency to install macros that have been
+ # obsoleted in current gnulib, so run this before gnulib-tool.
+ echo "$0: $AUTOPOINT --force"
+ $AUTOPOINT --force || exit
+ fi
+
+ # Autoreconf runs aclocal before libtoolize, which causes spurious
+ # warnings if the initial aclocal is confused by the libtoolized
+ # (or worse out-of-date) macro directory.
+ # libtoolize 1.9b added the --install option; but we support back
+ # to libtoolize 1.5.22, where the install action was default.
+ if test $use_libtool = 1; then
+ install=
+ case $($LIBTOOLIZE --help) in
+ *--install*) install=--install ;;
+ esac
+ echo "running: $LIBTOOLIZE $install --copy"
+ $LIBTOOLIZE $install --copy
+ fi
+
+ find . ! -type d -print | sort >$tempbase.1
+ old_IFS=$IFS
+ IFS=$nl
+ for file in $(comm -13 $tempbase.0 $tempbase.1); do
+ IFS=$old_IFS
+ parent=${file%/*}
+ version_controlled_file "$parent" "$file" || {
+ for dot_ig in x $vc_ignore; do
+ test $dot_ig = x && continue
+ ig=$parent/$dot_ig
+ insert_vc_ignore "$ig" "${file##*/}"
+ done
+ }
+ done
+ IFS=$old_IFS
+
+ rm -f $tempbase.0 $tempbase.1
+ trap - 1 2 13 15
+fi
+
+# Import from gnulib.
+
+gnulib_tool_options="\
+ --import\
+ --no-changelog\
+ --aux-dir $build_aux\
+ --doc-base $doc_base\
+ --lib $gnulib_name\
+ --m4-base $m4_base/\
+ --source-base $source_base/\
+ --tests-base $tests_base\
+ --local-dir $local_gl_dir\
+ $gnulib_tool_option_extras\
+"
+if test $use_libtool = 1; then
+ case "$gnulib_tool_options " in
+ *' --libtool '*) ;;
+ *) gnulib_tool_options="$gnulib_tool_options --libtool" ;;
+ esac
+fi
+echo "$0: $gnulib_tool $gnulib_tool_options --import ..."
+$gnulib_tool $gnulib_tool_options --import $gnulib_modules &&
+
+for file in $gnulib_files; do
+ symlink_to_dir "$GNULIB_SRCDIR" $file \
+ || die "failed to symlink $file"
+done
+
+bootstrap_post_import_hook \
+ || die "bootstrap_post_import_hook failed"
+
+# Remove any dangling symlink matching "*.m4" or "*.[ch]" in some
+# gnulib-populated directories. Such .m4 files would cause aclocal to fail.
+# The following requires GNU find 4.2.3 or newer. Considering the usual
+# portability constraints of this script, that may seem a very demanding
+# requirement, but it should be ok. Ignore any failure, which is fine,
+# since this is only a convenience to help developers avoid the relatively
+# unusual case in which a symlinked-to .m4 file is git-removed from gnulib
+# between successive runs of this script.
+find "$m4_base" "$source_base" \
+ -depth \( -name '*.m4' -o -name '*.[ch]' \) \
+ -type l -xtype l -delete > /dev/null 2>&1
+
+# Some systems (RHEL 5) are using ancient autotools, for which the
+# --no-recursive option had not been invented. Detect that lack and
+# omit the option when it's not supported. FIXME in 2017: remove this
+# hack when RHEL 5 autotools are updated, or when they become irrelevant.
+no_recursive=
+case $($AUTORECONF --help) in
+ *--no-recursive*) no_recursive=--no-recursive;;
+esac
+
+# Tell autoreconf not to invoke autopoint or libtoolize; they were run above.
+echo "running: AUTOPOINT=true LIBTOOLIZE=true " \
+ "$AUTORECONF --verbose --install $no_recursive -I $m4_base $ACLOCAL_FLAGS"
+AUTOPOINT=true LIBTOOLIZE=true \
+ $AUTORECONF --verbose --install $no_recursive -I $m4_base $ACLOCAL_FLAGS \
+ || die "autoreconf failed"
+
+# Get some extra files from gnulib, overriding existing files.
+for file in $gnulib_extra_files; do
+ case $file in
+ */INSTALL) dst=INSTALL;;
+ build-aux/*) dst=$build_aux/${file#build-aux/};;
+ *) dst=$file;;
+ esac
+ symlink_to_dir "$GNULIB_SRCDIR" $file $dst \
+ || die "failed to symlink $file"
projects / bison.git / blobdiff