+ Bison will stop adding a semicolon at the end of the actions (as announced
+ in the release 2.5):
+
+ foo.y:2.22: warning: a ';' might be needed at the end of action code
+ exp: "num" { $$ = $1 }
+ ^
+ foo.y:2.22: future versions of Bison will not add the ';'
+
+ Like other GNU packages, Bison will start using some of the C99 features
+ for its own code, especially the definition of variables after statements.
+ The generated C parsers still aim at C90.
+
+** Backward incompatible changes
+
+*** Obsolete features
+
+ Support for YYFAIL is removed (deprecated in Bison 2.4.2): use YYERROR.
+
+ Support for yystype and yyltype is removed (deprecated in Bison 1.875):
+ use YYSTYPE and YYLTYPE.
+
+ Support for YYLEX_PARAM and YYPARSE_PARAM is removed (deprecated in Bison
+ 1.875): use %lex-param, %parse-param, or %param.
+
+** Bug fixes
+
+*** The epilogue is no longer affected by internal #defines
+
+ The glr.c skeleton uses defines such as #define yylval (yystackp->yyval) in
+ generated code. These weren't properly undefined before the inclusion of
+ the user epilogue, so functions such as the following were butchered by the
+ preprocessor expansion:
+
+ int yylex (YYSTYPE *yylval);
+
+ This is has been fixed: yylval, yynerrs, yychar, and yylloc are now valid
+ identifiers for user-provided variables.
+
+*** stdio.h is no longer needed when locations are enabled (yacc.c)
+
+ Changes in Bison 2.7 introduced a dependency on FILE and fprintf when
+ locations are enabled. This is fixed.
+
+** Diagnostics reported by Bison
+
+ Most of these features were contributed by Théophile Ranquet and Victor
+ Santet.
+
+*** Carets
+
+ Version 2.7 introduced caret errors, for a prettier output. These are now
+ activated by default. The old format can still be used by invoking Bison
+ with -fno-caret (or -fnone).
+
+*** Enhancements of the -Werror option
+
+ The -Werror=CATEGORY option is now recognized, and will treat specified
+ warnings as errors. The warnings need not have been explicitly activated
+ using the -W option, this is similar to what GCC 4.7 does.
+
+ For example, given the following command line, Bison will treat both
+ warnings related to POSIX Yacc incompatibilities and S/R conflicts as
+ errors (and only those):
+
+ $ bison -Werror=yacc,error=conflicts-sr input.y
+
+ If no categories are specified, -Werror will make all active warnings into
+ errors. For example, the following line does the same the previous example:
+
+ $ bison -Werror -Wnone -Wyacc -Wconflicts-sr input.y
+
+ (By default -Wconflicts-sr,conflicts-rr,deprecated,other is enabled.)
+
+ Note that the categories in this -Werror option may not be prefixed with
+ "no-". However, -Wno-error[=CATEGORY] is valid.
+
+ Note that -y enables -Werror=yacc. Therefore it is now possible to require
+ Yacc-like behavior (e.g., always generate y.tab.c), but to report
+ incompatibilities as warnings: "-y -Wno-error=yacc".
+
+*** The display of warnings is now richer
+
+ The option that controls a given warning is now displayed:
+
+ foo.y:4.6: warning: type clash on default action: <foo> != <bar> [-Wother]
+
+ In the case of warnings treated as errors, the prefix is changed from
+ "warning: " to "error: ", and the suffix is displayed, in a manner similar
+ to GCC, as [-Werror=CATEGORY].
+
+ For instance, where the previous version of Bison would report (and exit
+ with failure):
+
+ bison: warnings being treated as errors
+ input.y:1.1: warning: stray ',' treated as white space
+
+ it now reports:
+
+ input.y:1.1: error: stray ',' treated as white space [-Werror=other]
+
+*** Deprecated constructs
+
+ The new 'deprecated' warning category flags obsolete constructs whose
+ support will be discontinued. It is enabled by default. These warnings
+ used to be reported as 'other' warnings.
+
+*** Useless semantic types
+
+ Bison now warns about useless (uninhabited) semantic types. Since
+ semantic types are not declared to Bison (they are defined in the opaque
+ %union structure), it is %printer/%destructor directives about useless
+ types that trigger the warning:
+
+ %token <type1> term
+ %type <type2> nterm
+ %printer {} <type1> <type3>
+ %destructor {} <type2> <type4>
+ %%
+ nterm: term { $$ = $1; };
+
+ 3.28-34: warning: type <type3> is used, but is not associated to any symbol
+ 4.28-34: warning: type <type4> is used, but is not associated to any symbol
+
+*** Undefined but unused symbols
+
+ Bison used to raise an error for undefined symbols that are not used in
+ the grammar. This is now only a warning.
+
+ %printer {} symbol1
+ %destructor {} symbol2
+ %type <type> symbol3
+ %%
+ exp: "a";
+
+*** Useless destructors or printers
+
+ Bison now warns about useless destructors or printers. In the following
+ example, the printer for <type1>, and the destructor for <type2> are
+ useless: all symbols of <type1> (token1) already have a printer, and all
+ symbols of type <type2> (token2) already have a destructor.
+
+ %token <type1> token1
+ <type2> token2
+ <type3> token3
+ <type4> token4
+ %printer {} token1 <type1> <type3>
+ %destructor {} token2 <type2> <type4>
+
+*** Conflicts
+
+ The warnings and error messages about shift/reduce and reduce/reduce
+ conflicts have been normalized. For instance on the following foo.y file:
+
+ %glr-parser
+ %%
+ exp: exp '+' exp | '0' | '0';
+
+ compare the previous version of bison:
+
+ $ bison foo.y
+ foo.y: conflicts: 1 shift/reduce, 2 reduce/reduce
+ $ bison -Werror foo.y
+ bison: warnings being treated as errors
+ foo.y: conflicts: 1 shift/reduce, 2 reduce/reduce
+
+ with the new behavior:
+
+ $ bison foo.y
+ foo.y: warning: 1 shift/reduce conflict [-Wconflicts-sr]
+ foo.y: warning: 2 reduce/reduce conflicts [-Wconflicts-rr]
+ $ bison -Werror foo.y
+ foo.y: error: 1 shift/reduce conflict [-Werror=conflicts-sr]
+ foo.y: error: 2 reduce/reduce conflicts [-Werror=conflicts-rr]
+
+ When %expect or %expect-rr is used, such as with bar.y:
+
+ %expect 0
+ %glr-parser
+ %%
+ exp: exp '+' exp | '0' | '0';
+
+ Former behavior:
+
+ $ bison bar.y
+ bar.y: conflicts: 1 shift/reduce, 2 reduce/reduce
+ bar.y: expected 0 shift/reduce conflicts
+ bar.y: expected 0 reduce/reduce conflicts
+
+ New one:
+
+ $ bison bar.y
+ bar.y: error: shift/reduce conflicts: 1 found, 0 expected
+ bar.y: error: reduce/reduce conflicts: 2 found, 0 expected
+
+** Additional yylex/yyparse arguments
+
+ The new directive %param declares additional arguments to both yylex and
+ yyparse. The %lex-param, %parse-param, and %param directives support one
+ or more arguments. Instead of
+
+ %lex-param {arg1_type *arg1}
+ %lex-param {arg2_type *arg2}
+ %parse-param {arg1_type *arg1}
+ %parse-param {arg2_type *arg2}
+
+ one may now declare
+
+ %param {arg1_type *arg1} {arg2_type *arg2}
+
+** Java skeleton improvements
+
+ Contributed by Paolo Bonzini.
+
+ The constants for token names were moved to the Lexer interface. Also, it
+ is possible to add code to the parser's constructors using "%code init"
+ and "%define init_throws".
+
+** C++ skeletons improvements
+
+*** The parser header is no longer mandatory (lalr1.cc, glr.cc)
+
+ Using %defines is now optional. Without it, the needed support classes
+ are defined in the generated parser, instead of additional files (such as
+ location.hh, position.hh and stack.hh).
+
+*** Locations are no longer mandatory (lalr1.cc, glr.cc)
+
+ Both lalr1.cc and glr.cc no longer require %location.
+
+*** syntax_error exception (lalr1.cc)
+
+ The C++ parser features a syntax_error exception, which can be
+ thrown from the scanner or from user rules to raise syntax errors.
+ This facilitates reporting errors caught in sub-functions (e.g.,
+ rejecting too large integral literals from a conversion function
+ used by the scanner, or rejecting invalid combinations from a
+ factory invoked by the user actions).
+
+** Renamed %define variables
+
+ The following variables have been renamed for consistency. Backward
+ compatibility is ensured, but upgrading is recommended.
+
+ lr.default-reductions -> lr.default-reduction
+ lr.keep-unreachable-states -> lr.keep-unreachable-state
+ namespace -> api.namespace
+ stype -> api.value.type
+
+** Variable api.token.prefix
+
+ The variable api.token.prefix changes the way tokens are identified in
+ the generated files. This is especially useful to avoid collisions
+ with identifiers in the target language. For instance
+
+ %token FILE for ERROR
+ %define api.token.prefix "TOK_"
+ %%
+ start: FILE for ERROR;
+
+ will generate the definition of the symbols TOK_FILE, TOK_for, and
+ TOK_ERROR in the generated sources. In particular, the scanner must
+ use these prefixed token names, although the grammar itself still
+ uses the short names (as in the sample rule given above).
+
+** Variable parse.error
+
+ This variable controls the verbosity of error messages. The use of the
+ %error-verbose directive is deprecated in favor of "%define parse.error
+ verbose".
+
+** Semantic predicates
+
+ Contributed by Paul Hilfinger.
+
+ The new, experimental, semantic-predicate feature allows actions of the
+ form "%?{ BOOLEAN-EXPRESSION }", which cause syntax errors (as for
+ YYERROR) if the expression evaluates to 0, and are evaluated immediately
+ in GLR parsers, rather than being deferred. The result is that they allow
+ the programmer to prune possible parses based on the values of run-time
+ expressions.
+
+** The directive %expect-rr is now an error in non GLR mode
+
+ It used to be an error only if used in non GLR mode, _and_ if there are
+ reduce/reduce conflicts.
+
+** Token numbering has changed to preserve the user-defined order
+
+ When declaring %token A B, the numbering for A is inferior to B. Up to now,
+ when declaring associativity at the same time, with %left (or %right,
+ %precedence, %nonassoc), B was inferior to A.
+
+** Useless precedence and associativity
+
+ When developping and maintaining a grammar, useless associativity and
+ precedence directives are common. They can be a nuisance: new ambiguities
+ arising are sometimes masked because their conflicts are resolved due to
+ the extra precedence or associativity information. Furthermore, it can
+ hinder the comprehension of a new grammar: one will wonder about the role
+ of a precedence, where in fact it is useless. The following changes aim
+ at detecting and reporting these extra directives.
+
+*** Precedence warning category
+
+ A new category of warning, -Wprecedence, was introduced. It flags the
+ useless precedence and associativity directives.
+
+*** Useless associativity
+
+ Bison now warns about symbols with a declared associativity that is never
+ used to resolve conflicts. In that case, using %precedence is sufficient;
+ the parsing tables will remain unchanged. Solving these warnings may raise
+ useless precedence warnings, as the symbols no longer have associativity.
+ For example:
+
+ %left '+'
+ %left '*'
+ %%
+ exp:
+ "num"
+ | exp '+' "num"
+ | exp '*' exp
+ ;
+
+ will produce a
+
+ warning: useless associativity for '+', use %precedence [-Wprecedence]
+ %left '+'
+ ^^^
+
+*** Useless precedence
+
+ Bison now warns about symbols with a declared precedence and no declared
+ associativity (i.e., declared with %precedence), and whose precedence is
+ never used. In that case, the symbol can be safely declared with %token
+ instead, without modifying the parsing tables. For example:
+
+ %precedence '='
+ %%
+ exp: "var" '=' "num";
+
+ will produce a
+
+ warning: useless precedence for '=' [-Wprecedence]
+ %precedence '='
+ ^^^
+
+*** Useless precedence and associativity
+
+ In case of both useless precedence and associativity, the issue is flagged
+ as follows:
+
+ %nonassoc '='
+ %%
+ exp: "var" '=' "num";
+
+ The warning is:
+
+ warning: useless precedence and associativity for '=' [-Wprecedence]
+ %nonassoc '='
+ ^^^
+
+* Noteworthy changes in release 2.7 (2012-12-12) [stable]
+
+** Bug fixes
+
+ Warnings about uninitialized yylloc in yyparse have been fixed.
+
+ Restored C90 compliance (yet no report was ever made).
+
+** Diagnostics are improved
+
+ Contributed by Théophile Ranquet.
+
+*** Changes in the format of error messages
+
+ This used to be the format of many error reports:
+
+ input.y:2.7-12: %type redeclaration for exp
+ input.y:1.7-12: previous declaration
+
+ It is now:
+
+ input.y:2.7-12: error: %type redeclaration for exp
+ input.y:1.7-12: previous declaration
+
+*** New format for error reports: carets
+
+ Caret errors have been added to Bison:
+
+ input.y:2.7-12: error: %type redeclaration for exp
+ %type <sval> exp
+ ^^^^^^
+ input.y:1.7-12: previous declaration
+ %type <ival> exp
+ ^^^^^^
+
+ or
+
+ input.y:3.20-23: error: ambiguous reference: '$exp'
+ exp: exp '+' exp { $exp = $1 + $3; };
+ ^^^^
+ input.y:3.1-3: refers to: $exp at $$
+ exp: exp '+' exp { $exp = $1 + $3; };
+ ^^^
+ input.y:3.6-8: refers to: $exp at $1
+ exp: exp '+' exp { $exp = $1 + $3; };
+ ^^^
+ input.y:3.14-16: refers to: $exp at $3
+ exp: exp '+' exp { $exp = $1 + $3; };
+ ^^^
+
+ The default behaviour for now is still not to display these unless
+ explictly asked with -fcaret (or -fall). However, in a later release, it
+ will be made the default behavior (but may still be deactivated with
+ -fno-caret).
+
+** New value for %define variable: api.pure full
+
+ The %define variable api.pure requests a pure (reentrant) parser. However,
+ for historical reasons, using it in a location-tracking Yacc parser
+ resulted in a yyerror function that did not take a location as a
+ parameter. With this new value, the user may request a better pure parser,
+ where yyerror does take a location as a parameter (in location-tracking
+ parsers).
+
+ The use of "%define api.pure true" is deprecated in favor of this new
+ "%define api.pure full".
+
+** New %define variable: api.location.type (glr.cc, lalr1.cc, lalr1.java)
+
+ The %define variable api.location.type defines the name of the type to use
+ for locations. When defined, Bison no longer generates the position.hh
+ and location.hh files, nor does the parser will include them: the user is
+ then responsible to define her type.
+
+ This can be used in programs with several parsers to factor their location
+ and position files: let one of them generate them, and the others just use
+ them.
+
+ This feature was actually introduced, but not documented, in Bison 2.5,
+ under the name "location_type" (which is maintained for backward
+ compatibility).
+
+ For consistency, lalr1.java's %define variables location_type and
+ position_type are deprecated in favor of api.location.type and
+ api.position.type.
+
+** Exception safety (lalr1.cc)
+
+ The parse function now catches exceptions, uses the %destructors to
+ release memory (the lookahead symbol and the symbols pushed on the stack)
+ before re-throwing the exception.
+
+ This feature is somewhat experimental. User feedback would be
+ appreciated.
+
+** Graph improvements in DOT and XSLT
+
+ Contributed by Théophile Ranquet.
+
+ The graphical presentation of the states is more readable: their shape is
+ now rectangular, the state number is clearly displayed, and the items are
+ numbered and left-justified.
+
+ The reductions are now explicitly represented as transitions to other
+ diamond shaped nodes.
+
+ These changes are present in both --graph output and xml2dot.xsl XSLT
+ processing, with minor (documented) differences.
+
+** %language is no longer an experimental feature.
+
+ The introduction of this feature, in 2.4, was four years ago. The
+ --language option and the %language directive are no longer experimental.
+
+** Documentation
+
+ The sections about shift/reduce and reduce/reduce conflicts resolution
+ have been fixed and extended.
+
+ Although introduced more than four years ago, XML and Graphviz reports
+ were not properly documented.
+
+ The translation of mid-rule actions is now described.
+
+* Noteworthy changes in release 2.6.5 (2012-11-07) [stable]
+
+ We consider compiler warnings about Bison generated parsers to be bugs.
+ Rather than working around them in your own project, please consider
+ reporting them to us.
+
+** Bug fixes
+
+ Warnings about uninitialized yylval and/or yylloc for push parsers with a
+ pure interface have been fixed for GCC 4.0 up to 4.8, and Clang 2.9 to
+ 3.2.
+
+ Other issues in the test suite have been addressed.
+
+ Nul characters are correctly displayed in error messages.
+
+ When possible, yylloc is correctly initialized before calling yylex. It
+ is no longer necessary to initialize it in the %initial-action.
+
+* Noteworthy changes in release 2.6.4 (2012-10-23) [stable]
+
+ Bison 2.6.3's --version was incorrect. This release fixes this issue.
+
+* Noteworthy changes in release 2.6.3 (2012-10-22) [stable]
+
+** Bug fixes
+
+ Bugs and portability issues in the test suite have been fixed.
+
+ Some errors in translations have been addressed, and --help now directs
+ users to the appropriate place to report them.
+
+ Stray Info files shipped by accident are removed.
+
+ Incorrect definitions of YY_, issued by yacc.c when no parser header is
+ generated, are removed.
+
+ All the generated headers are self-contained.
+
+** Header guards (yacc.c, glr.c, glr.cc)
+
+ In order to avoid collisions, the header guards are now
+ YY_<PREFIX>_<FILE>_INCLUDED, instead of merely <PREFIX>_<FILE>.
+ For instance the header generated from
+
+ %define api.prefix "calc"
+ %defines "lib/parse.h"
+
+ will use YY_CALC_LIB_PARSE_H_INCLUDED as guard.
+
+** Fix compiler warnings in the generated parser (yacc.c, glr.c)
+
+ The compilation of pure parsers (%define api.pure) can trigger GCC
+ warnings such as:
+
+ input.c: In function 'yyparse':
+ input.c:1503:12: warning: 'yylval' may be used uninitialized in this
+ function [-Wmaybe-uninitialized]
+ *++yyvsp = yylval;
+ ^
+
+ This is now fixed; pragmas to avoid these warnings are no longer needed.
+
+ Warnings from clang ("equality comparison with extraneous parentheses" and
+ "function declared 'noreturn' should not return") have also been
+ addressed.
+
+* Noteworthy changes in release 2.6.2 (2012-08-03) [stable]
+
+** Bug fixes
+
+ Buffer overruns, complaints from Flex, and portability issues in the test
+ suite have been fixed.
+
+** Spaces in %lex- and %parse-param (lalr1.cc, glr.cc)
+
+ Trailing end-of-lines in %parse-param or %lex-param would result in
+ invalid C++. This is fixed.
+
+** Spurious spaces and end-of-lines
+
+ The generated files no longer end (nor start) with empty lines.
+
+* Noteworthy changes in release 2.6.1 (2012-07-30) [stable]
+
+ Bison no longer executes user-specified M4 code when processing a grammar.
+
+** Future Changes
+
+ In addition to the removal of the features announced in Bison 2.6, the
+ next major release will remove the "Temporary hack for adding a semicolon
+ to the user action", as announced in the release 2.5. Instead of:
+
+ exp: exp "+" exp { $$ = $1 + $3 };
+
+ write:
+
+ exp: exp "+" exp { $$ = $1 + $3; };
+
+** Bug fixes
+
+*** Type names are now properly escaped.
+
+*** glr.cc: set_debug_level and debug_level work as expected.
+
+*** Stray @ or $ in actions
+
+ While Bison used to warn about stray $ or @ in action rules, it did not
+ for other actions such as printers, destructors, or initial actions. It
+ now does.
+
+** Type names in actions
+
+ For consistency with rule actions, it is now possible to qualify $$ by a
+ type-name in destructors, printers, and initial actions. For instance:
+
+ %printer { fprintf (yyo, "(%d, %f)", $<ival>$, $<fval>$); } <*> <>;
+
+ will display two values for each typed and untyped symbol (provided
+ that YYSTYPE has both "ival" and "fval" fields).
+
+* Noteworthy changes in release 2.6 (2012-07-19) [stable]
+
+** Future changes
+
+ The next major release of Bison will drop support for the following
+ deprecated features. Please report disagreements to bug-bison@gnu.org.
+
+*** K&R C parsers
+
+ Support for generating parsers in K&R C will be removed. Parsers
+ generated for C support ISO C90, and are tested with ISO C99 and ISO C11
+ compilers.
+
+*** Features deprecated since Bison 1.875
+
+ The definitions of yystype and yyltype will be removed; use YYSTYPE and
+ YYLTYPE.
+
+ YYPARSE_PARAM and YYLEX_PARAM, deprecated in favor of %parse-param and
+ %lex-param, will no longer be supported.
+
+ Support for the preprocessor symbol YYERROR_VERBOSE will be removed, use
+ %error-verbose.
+
+*** The generated header will be included (yacc.c)
+
+ Instead of duplicating the content of the generated header (definition of
+ YYSTYPE, yyparse declaration etc.), the generated parser will include it,
+ as is already the case for GLR or C++ parsers. This change is deferred
+ because existing versions of ylwrap (e.g., Automake 1.12.1) do not support
+ it.
+
+** Generated Parser Headers
+
+*** Guards (yacc.c, glr.c, glr.cc)
+
+ The generated headers are now guarded, as is already the case for C++
+ parsers (lalr1.cc). For instance, with --defines=foo.h:
+
+ #ifndef YY_FOO_H
+ # define YY_FOO_H
+ ...
+ #endif /* !YY_FOO_H */
+
+*** New declarations (yacc.c, glr.c)
+
+ The generated header now declares yydebug and yyparse. Both honor
+ --name-prefix=bar_, and yield
+
+ int bar_parse (void);
+
+ rather than
+
+ #define yyparse bar_parse
+ int yyparse (void);
+
+ in order to facilitate the inclusion of several parser headers inside a
+ single compilation unit.
+
+*** Exported symbols in C++
+
+ The symbols YYTOKEN_TABLE and YYERROR_VERBOSE, which were defined in the
+ header, are removed, as they prevent the possibility of including several
+ generated headers from a single compilation unit.
+
+*** YYLSP_NEEDED
+
+ For the same reasons, the undocumented and unused macro YYLSP_NEEDED is no
+ longer defined.
+
+** New %define variable: api.prefix
+
+ Now that the generated headers are more complete and properly protected
+ against multiple inclusions, constant names, such as YYSTYPE are a
+ problem. While yyparse and others are properly renamed by %name-prefix,
+ YYSTYPE, YYDEBUG and others have never been affected by it. Because it
+ would introduce backward compatibility issues in projects not expecting
+ YYSTYPE to be renamed, instead of changing the behavior of %name-prefix,
+ it is deprecated in favor of a new %define variable: api.prefix.
+
+ The following examples compares both:
+
+ %name-prefix "bar_" | %define api.prefix "bar_"
+ %token <ival> FOO %token <ival> FOO
+ %union { int ival; } %union { int ival; }
+ %% %%
+ exp: 'a'; exp: 'a';
+
+ bison generates:
+
+ #ifndef BAR_FOO_H #ifndef BAR_FOO_H
+ # define BAR_FOO_H # define BAR_FOO_H
+
+ /* Enabling traces. */ /* Enabling traces. */
+ # ifndef YYDEBUG | # ifndef BAR_DEBUG
+ > # if defined YYDEBUG
+ > # if YYDEBUG
+ > # define BAR_DEBUG 1
+ > # else
+ > # define BAR_DEBUG 0
+ > # endif
+ > # else
+ # define YYDEBUG 0 | # define BAR_DEBUG 0
+ > # endif
+ # endif | # endif
+
+ # if YYDEBUG | # if BAR_DEBUG
+ extern int bar_debug; extern int bar_debug;
+ # endif # endif
+
+ /* Tokens. */ /* Tokens. */
+ # ifndef YYTOKENTYPE | # ifndef BAR_TOKENTYPE
+ # define YYTOKENTYPE | # define BAR_TOKENTYPE
+ enum yytokentype { | enum bar_tokentype {
+ FOO = 258 FOO = 258
+ }; };
+ # endif # endif
+
+ #if ! defined YYSTYPE \ | #if ! defined BAR_STYPE \
+ && ! defined YYSTYPE_IS_DECLARED | && ! defined BAR_STYPE_IS_DECLARED
+ typedef union YYSTYPE | typedef union BAR_STYPE
+ { {
+ int ival; int ival;
+ } YYSTYPE; | } BAR_STYPE;
+ # define YYSTYPE_IS_DECLARED 1 | # define BAR_STYPE_IS_DECLARED 1
+ #endif #endif
+
+ extern YYSTYPE bar_lval; | extern BAR_STYPE bar_lval;
+
+ int bar_parse (void); int bar_parse (void);
+
+ #endif /* !BAR_FOO_H */ #endif /* !BAR_FOO_H */
+
+* Noteworthy changes in release 2.5.1 (2012-06-05) [stable]
+
+** Future changes:
+
+ The next major release will drop support for generating parsers in K&R C.
+
+** yacc.c: YYBACKUP works as expected.
+
+** glr.c improvements:
+
+*** Location support is eliminated when not requested:
+
+ GLR parsers used to include location-related code even when locations were
+ not requested, and therefore not even usable.
+
+*** __attribute__ is preserved:
+
+ __attribute__ is no longer disabled when __STRICT_ANSI__ is defined (i.e.,
+ when -std is passed to GCC).
+
+** lalr1.java: several fixes:
+
+ The Java parser no longer throws ArrayIndexOutOfBoundsException if the
+ first token leads to a syntax error. Some minor clean ups.
+
+** Changes for C++:
+
+*** C++11 compatibility:
+
+ C and C++ parsers use "nullptr" instead of "0" when __cplusplus is 201103L
+ or higher.
+
+*** Header guards
+
+ The header files such as "parser.hh", "location.hh", etc. used a constant
+ name for preprocessor guards, for instance:
+
+ #ifndef BISON_LOCATION_HH
+ # define BISON_LOCATION_HH
+ ...
+ #endif // !BISON_LOCATION_HH
+
+ The inclusion guard is now computed from "PREFIX/FILE-NAME", where lower
+ case characters are converted to upper case, and series of
+ non-alphanumerical characters are converted to an underscore.
+
+ With "bison -o lang++/parser.cc", "location.hh" would now include:
+
+ #ifndef YY_LANG_LOCATION_HH
+ # define YY_LANG_LOCATION_HH
+ ...
+ #endif // !YY_LANG_LOCATION_HH
+
+*** C++ locations:
+
+ The position and location constructors (and their initialize methods)
+ accept new arguments for line and column. Several issues in the
+ documentation were fixed.
+
+** liby is no longer asking for "rpl_fprintf" on some platforms.
+
+** Changes in the manual:
+
+*** %printer is documented
+
+ The "%printer" directive, supported since at least Bison 1.50, is finally
+ documented. The "mfcalc" example is extended to demonstrate it.
+
+ For consistency with the C skeletons, the C++ parsers now also support
+ "yyoutput" (as an alias to "debug_stream ()").
+
+*** Several improvements have been made:
+
+ The layout for grammar excerpts was changed to a more compact scheme.
+ Named references are motivated. The description of the automaton
+ description file (*.output) is updated to the current format. Incorrect
+ index entries were fixed. Some other errors were fixed.
+
+** Building bison:
+
+*** Conflicting prototypes with recent/modified Flex.
+
+ Fixed build problems with the current, unreleased, version of Flex, and
+ some modified versions of 2.5.35, which have modified function prototypes.
+
+*** Warnings during the build procedure have been eliminated.
+
+*** Several portability problems in the test suite have been fixed:
+
+ This includes warnings with some compilers, unexpected behavior of tools
+ such as diff, warning messages from the test suite itself, etc.
+
+*** The install-pdf target works properly:
+
+ Running "make install-pdf" (or -dvi, -html, -info, and -ps) no longer
+ halts in the middle of its course.
+
+* Changes in version 2.5 (2011-05-14):
+
+** Grammar symbol names can now contain non-initial dashes:
+
+ Consistently with directives (such as %error-verbose) and with
+ %define variables (e.g. push-pull), grammar symbol names may contain
+ dashes in any position except the beginning. This is a GNU
+ extension over POSIX Yacc. Thus, use of this extension is reported
+ by -Wyacc and rejected in Yacc mode (--yacc).
+
+** Named references:
+
+ Historically, Yacc and Bison have supported positional references
+ ($n, $$) to allow access to symbol values from inside of semantic
+ actions code.
+
+ Starting from this version, Bison can also accept named references.
+ When no ambiguity is possible, original symbol names may be used
+ as named references:
+
+ if_stmt : "if" cond_expr "then" then_stmt ';'
+ { $if_stmt = mk_if_stmt($cond_expr, $then_stmt); }
+
+ In the more common case, explicit names may be declared:
+
+ stmt[res] : "if" expr[cond] "then" stmt[then] "else" stmt[else] ';'
+ { $res = mk_if_stmt($cond, $then, $else); }
+
+ Location information is also accessible using @name syntax. When
+ accessing symbol names containing dots or dashes, explicit bracketing
+ ($[sym.1]) must be used.
+
+ These features are experimental in this version. More user feedback
+ will help to stabilize them.
+ Contributed by Alex Rozenman.
+
+** IELR(1) and canonical LR(1):
+
+ IELR(1) is a minimal LR(1) parser table generation algorithm. That
+ is, given any context-free grammar, IELR(1) generates parser tables
+ with the full language-recognition power of canonical LR(1) but with
+ nearly the same number of parser states as LALR(1). This reduction
+ in parser states is often an order of magnitude. More importantly,
+ because canonical LR(1)'s extra parser states may contain duplicate
+ conflicts in the case of non-LR(1) grammars, the number of conflicts
+ for IELR(1) is often an order of magnitude less as well. This can
+ significantly reduce the complexity of developing of a grammar.
+
+ Bison can now generate IELR(1) and canonical LR(1) parser tables in
+ place of its traditional LALR(1) parser tables, which remain the
+ default. You can specify the type of parser tables in the grammar
+ file with these directives:
+
+ %define lr.type lalr
+ %define lr.type ielr
+ %define lr.type canonical-lr
+
+ The default-reduction optimization in the parser tables can also be
+ adjusted using "%define lr.default-reductions". For details on both
+ of these features, see the new section "Tuning LR" in the Bison
+ manual.
+
+ These features are experimental. More user feedback will help to
+ stabilize them.
+
+** LAC (Lookahead Correction) for syntax error handling
+
+ Contributed by Joel E. Denny.
+
+ Canonical LR, IELR, and LALR can suffer from a couple of problems
+ upon encountering a syntax error. First, the parser might perform
+ additional parser stack reductions before discovering the syntax
+ error. Such reductions can perform user semantic actions that are
+ unexpected because they are based on an invalid token, and they
+ cause error recovery to begin in a different syntactic context than
+ the one in which the invalid token was encountered. Second, when
+ verbose error messages are enabled (with %error-verbose or the
+ obsolete "#define YYERROR_VERBOSE"), the expected token list in the
+ syntax error message can both contain invalid tokens and omit valid
+ tokens.
+
+ The culprits for the above problems are %nonassoc, default
+ reductions in inconsistent states, and parser state merging. Thus,
+ IELR and LALR suffer the most. Canonical LR can suffer only if
+ %nonassoc is used or if default reductions are enabled for
+ inconsistent states.
+
+ LAC is a new mechanism within the parsing algorithm that solves
+ these problems for canonical LR, IELR, and LALR without sacrificing
+ %nonassoc, default reductions, or state merging. When LAC is in
+ use, canonical LR and IELR behave almost exactly the same for both
+ syntactically acceptable and syntactically unacceptable input.
+ While LALR still does not support the full language-recognition
+ power of canonical LR and IELR, LAC at least enables LALR's syntax
+ error handling to correctly reflect LALR's language-recognition
+ power.
+
+ Currently, LAC is only supported for deterministic parsers in C.
+ You can enable LAC with the following directive:
+
+ %define parse.lac full
+
+ See the new section "LAC" in the Bison manual for additional
+ details including a few caveats.
+
+ LAC is an experimental feature. More user feedback will help to
+ stabilize it.
+
+** %define improvements:
+
+*** Can now be invoked via the command line:
+
+ Each of these command-line options
+
+ -D NAME[=VALUE]
+ --define=NAME[=VALUE]
+
+ -F NAME[=VALUE]
+ --force-define=NAME[=VALUE]
+
+ is equivalent to this grammar file declaration
+
+ %define NAME ["VALUE"]
+
+ except that the manner in which Bison processes multiple definitions
+ for the same NAME differs. Most importantly, -F and --force-define
+ quietly override %define, but -D and --define do not. For further
+ details, see the section "Bison Options" in the Bison manual.
+
+*** Variables renamed:
+
+ The following %define variables
+
+ api.push_pull
+ lr.keep_unreachable_states
+
+ have been renamed to
+
+ api.push-pull
+ lr.keep-unreachable-states
+
+ The old names are now deprecated but will be maintained indefinitely
+ for backward compatibility.
+
+*** Values no longer need to be quoted in the grammar file:
+
+ If a %define value is an identifier, it no longer needs to be placed
+ within quotations marks. For example,
+
+ %define api.push-pull "push"
+
+ can be rewritten as
+
+ %define api.push-pull push
+
+*** Unrecognized variables are now errors not warnings.
+
+*** Multiple invocations for any variable is now an error not a warning.
+
+** Unrecognized %code qualifiers are now errors not warnings.
+
+** Character literals not of length one:
+
+ Previously, Bison quietly converted all character literals to length
+ one. For example, without warning, Bison interpreted the operators in
+ the following grammar to be the same token:
+
+ exp: exp '++'
+ | exp '+' exp
+ ;
+
+ Bison now warns when a character literal is not of length one. In
+ some future release, Bison will start reporting an error instead.
+
+** Destructor calls fixed for lookaheads altered in semantic actions:
+
+ Previously for deterministic parsers in C, if a user semantic action
+ altered yychar, the parser in some cases used the old yychar value to
+ determine which destructor to call for the lookahead upon a syntax
+ error or upon parser return. This bug has been fixed.
+
+** C++ parsers use YYRHSLOC:
+
+ Similarly to the C parsers, the C++ parsers now define the YYRHSLOC
+ macro and use it in the default YYLLOC_DEFAULT. You are encouraged
+ to use it. If, for instance, your location structure has "first"
+ and "last" members, instead of
+
+ # define YYLLOC_DEFAULT(Current, Rhs, N) \
+ do \
+ if (N) \
+ { \
+ (Current).first = (Rhs)[1].location.first; \
+ (Current).last = (Rhs)[N].location.last; \
+ } \
+ else \
+ { \
+ (Current).first = (Current).last = (Rhs)[0].location.last; \
+ } \
+ while (false)
+
+ use:
+
+ # define YYLLOC_DEFAULT(Current, Rhs, N) \
+ do \
+ if (N) \
+ { \
+ (Current).first = YYRHSLOC (Rhs, 1).first; \
+ (Current).last = YYRHSLOC (Rhs, N).last; \
+ } \
+ else \
+ { \
+ (Current).first = (Current).last = YYRHSLOC (Rhs, 0).last; \
+ } \
+ while (false)
+
+** YYLLOC_DEFAULT in C++:
+
+ The default implementation of YYLLOC_DEFAULT used to be issued in
+ the header file. It is now output in the implementation file, after
+ the user %code sections so that its #ifndef guard does not try to
+ override the user's YYLLOC_DEFAULT if provided.
+
+** YYFAIL now produces warnings and Java parsers no longer implement it:
+
+ YYFAIL has existed for many years as an undocumented feature of
+ deterministic parsers in C generated by Bison. More recently, it was
+ a documented feature of Bison's experimental Java parsers. As
+ promised in Bison 2.4.2's NEWS entry, any appearance of YYFAIL in a
+ semantic action now produces a deprecation warning, and Java parsers
+ no longer implement YYFAIL at all. For further details, including a
+ discussion of how to suppress C preprocessor warnings about YYFAIL
+ being unused, see the Bison 2.4.2 NEWS entry.
+
+** Temporary hack for adding a semicolon to the user action:
+
+ Previously, Bison appended a semicolon to every user action for
+ reductions when the output language defaulted to C (specifically, when
+ neither %yacc, %language, %skeleton, or equivalent command-line
+ options were specified). This allowed actions such as
+
+ exp: exp "+" exp { $$ = $1 + $3 };
+
+ instead of
+
+ exp: exp "+" exp { $$ = $1 + $3; };
+
+ As a first step in removing this misfeature, Bison now issues a
+ warning when it appends a semicolon. Moreover, in cases where Bison
+ cannot easily determine whether a semicolon is needed (for example, an
+ action ending with a cpp directive or a braced compound initializer),
+ it no longer appends one. Thus, the C compiler might now complain
+ about a missing semicolon where it did not before. Future releases of
+ Bison will cease to append semicolons entirely.
+
+** Verbose syntax error message fixes:
+
+ When %error-verbose or the obsolete "#define YYERROR_VERBOSE" is
+ specified, syntax error messages produced by the generated parser
+ include the unexpected token as well as a list of expected tokens.
+ The effect of %nonassoc on these verbose messages has been corrected
+ in two ways, but a more complete fix requires LAC, described above:
+
+*** When %nonassoc is used, there can exist parser states that accept no
+ tokens, and so the parser does not always require a lookahead token
+ in order to detect a syntax error. Because no unexpected token or
+ expected tokens can then be reported, the verbose syntax error
+ message described above is suppressed, and the parser instead
+ reports the simpler message, "syntax error". Previously, this
+ suppression was sometimes erroneously triggered by %nonassoc when a
+ lookahead was actually required. Now verbose messages are
+ suppressed only when all previous lookaheads have already been
+ shifted or discarded.
+
+*** Previously, the list of expected tokens erroneously included tokens
+ that would actually induce a syntax error because conflicts for them
+ were resolved with %nonassoc in the current parser state. Such
+ tokens are now properly omitted from the list.
+
+*** Expected token lists are still often wrong due to state merging
+ (from LALR or IELR) and default reductions, which can both add
+ invalid tokens and subtract valid tokens. Canonical LR almost
+ completely fixes this problem by eliminating state merging and
+ default reductions. However, there is one minor problem left even
+ when using canonical LR and even after the fixes above. That is,
+ if the resolution of a conflict with %nonassoc appears in a later
+ parser state than the one at which some syntax error is
+ discovered, the conflicted token is still erroneously included in
+ the expected token list. Bison's new LAC implementation,
+ described above, eliminates this problem and the need for
+ canonical LR. However, LAC is still experimental and is disabled
+ by default.
+
+** Java skeleton fixes:
+
+*** A location handling bug has been fixed.
+
+*** The top element of each of the value stack and location stack is now
+ cleared when popped so that it can be garbage collected.
+
+*** Parser traces now print the top element of the stack.
+
+** -W/--warnings fixes:
+
+*** Bison now properly recognizes the "no-" versions of categories:
+
+ For example, given the following command line, Bison now enables all
+ warnings except warnings for incompatibilities with POSIX Yacc:
+
+ bison -Wall,no-yacc gram.y
+
+*** Bison now treats S/R and R/R conflicts like other warnings:
+
+ Previously, conflict reports were independent of Bison's normal
+ warning system. Now, Bison recognizes the warning categories
+ "conflicts-sr" and "conflicts-rr". This change has important
+ consequences for the -W and --warnings command-line options. For
+ example:
+
+ bison -Wno-conflicts-sr gram.y # S/R conflicts not reported
+ bison -Wno-conflicts-rr gram.y # R/R conflicts not reported
+ bison -Wnone gram.y # no conflicts are reported
+ bison -Werror gram.y # any conflict is an error
+
+ However, as before, if the %expect or %expect-rr directive is
+ specified, an unexpected number of conflicts is an error, and an
+ expected number of conflicts is not reported, so -W and --warning
+ then have no effect on the conflict report.
+
+*** The "none" category no longer disables a preceding "error":
+
+ For example, for the following command line, Bison now reports
+ errors instead of warnings for incompatibilities with POSIX Yacc:
+
+ bison -Werror,none,yacc gram.y
+
+*** The "none" category now disables all Bison warnings:
+
+ Previously, the "none" category disabled only Bison warnings for
+ which there existed a specific -W/--warning category. However,
+ given the following command line, Bison is now guaranteed to
+ suppress all warnings:
+
+ bison -Wnone gram.y
+
+** Precedence directives can now assign token number 0:
+
+ Since Bison 2.3b, which restored the ability of precedence
+ directives to assign token numbers, doing so for token number 0 has
+ produced an assertion failure. For example:
+
+ %left END 0
+
+ This bug has been fixed.
+
+* Changes in version 2.4.3 (2010-08-05):
+
+** Bison now obeys -Werror and --warnings=error for warnings about
+ grammar rules that are useless in the parser due to conflicts.
+
+** Problems with spawning M4 on at least FreeBSD 8 and FreeBSD 9 have
+ been fixed.
+
+** Failures in the test suite for GCC 4.5 have been fixed.
+
+** Failures in the test suite for some versions of Sun Studio C++ have
+ been fixed.
+
+** Contrary to Bison 2.4.2's NEWS entry, it has been decided that
+ warnings about undefined %prec identifiers will not be converted to
+ errors in Bison 2.5. They will remain warnings, which should be
+ sufficient for POSIX while avoiding backward compatibility issues.
+
+** Minor documentation fixes.
+
+* Changes in version 2.4.2 (2010-03-20):
+
+** Some portability problems that resulted in failures and livelocks
+ in the test suite on some versions of at least Solaris, AIX, HP-UX,
+ RHEL4, and Tru64 have been addressed. As a result, fatal Bison
+ errors should no longer cause M4 to report a broken pipe on the
+ affected platforms.
+
+** "%prec IDENTIFIER" requires IDENTIFIER to be defined separately.
+
+ POSIX specifies that an error be reported for any identifier that does
+ not appear on the LHS of a grammar rule and that is not defined by
+ %token, %left, %right, or %nonassoc. Bison 2.3b and later lost this
+ error report for the case when an identifier appears only after a
+ %prec directive. It is now restored. However, for backward
+ compatibility with recent Bison releases, it is only a warning for
+ now. In Bison 2.5 and later, it will return to being an error.
+ [Between the 2.4.2 and 2.4.3 releases, it was decided that this
+ warning will not be converted to an error in Bison 2.5.]
+
+** Detection of GNU M4 1.4.6 or newer during configure is improved.
+
+** Warnings from gcc's -Wundef option about undefined YYENABLE_NLS,
+ YYLTYPE_IS_TRIVIAL, and __STRICT_ANSI__ in C/C++ parsers are now
+ avoided.
+
+** %code is now a permanent feature.
+
+ A traditional Yacc prologue directive is written in the form:
+
+ %{CODE%}
+
+ To provide a more flexible alternative, Bison 2.3b introduced the
+ %code directive with the following forms for C/C++:
+
+ %code {CODE}
+ %code requires {CODE}
+ %code provides {CODE}
+ %code top {CODE}
+
+ These forms are now considered permanent features of Bison. See the
+ %code entries in the section "Bison Declaration Summary" in the Bison
+ manual for a summary of their functionality. See the section
+ "Prologue Alternatives" for a detailed discussion including the
+ advantages of %code over the traditional Yacc prologue directive.
+
+ Bison's Java feature as a whole including its current usage of %code
+ is still considered experimental.
+
+** YYFAIL is deprecated and will eventually be removed.
+
+ YYFAIL has existed for many years as an undocumented feature of
+ deterministic parsers in C generated by Bison. Previously, it was
+ documented for Bison's experimental Java parsers. YYFAIL is no longer
+ documented for Java parsers and is formally deprecated in both cases.
+ Users are strongly encouraged to migrate to YYERROR, which is
+ specified by POSIX.
+
+ Like YYERROR, you can invoke YYFAIL from a semantic action in order to
+ induce a syntax error. The most obvious difference from YYERROR is
+ that YYFAIL will automatically invoke yyerror to report the syntax
+ error so that you don't have to. However, there are several other
+ subtle differences between YYERROR and YYFAIL, and YYFAIL suffers from
+ inherent flaws when %error-verbose or "#define YYERROR_VERBOSE" is
+ used. For a more detailed discussion, see:
+
+ http://lists.gnu.org/archive/html/bison-patches/2009-12/msg00024.html
+
+ The upcoming Bison 2.5 will remove YYFAIL from Java parsers, but
+ deterministic parsers in C will continue to implement it. However,
+ because YYFAIL is already flawed, it seems futile to try to make new
+ Bison features compatible with it. Thus, during parser generation,
+ Bison 2.5 will produce a warning whenever it discovers YYFAIL in a
+ rule action. In a later release, YYFAIL will be disabled for
+ %error-verbose and "#define YYERROR_VERBOSE". Eventually, YYFAIL will
+ be removed altogether.
+
+ There exists at least one case where Bison 2.5's YYFAIL warning will
+ be a false positive. Some projects add phony uses of YYFAIL and other
+ Bison-defined macros for the sole purpose of suppressing C
+ preprocessor warnings (from GCC cpp's -Wunused-macros, for example).
+ To avoid Bison's future warning, such YYFAIL uses can be moved to the
+ epilogue (that is, after the second "%%") in the Bison input file. In
+ this release (2.4.2), Bison already generates its own code to suppress
+ C preprocessor warnings for YYFAIL, so projects can remove their own
+ phony uses of YYFAIL if compatibility with Bison releases prior to
+ 2.4.2 is not necessary.
+
+** Internationalization.
+
+ Fix a regression introduced in Bison 2.4: Under some circumstances,
+ message translations were not installed although supported by the
+ host system.
+
+* Changes in version 2.4.1 (2008-12-11):
+
+** In the GLR defines file, unexpanded M4 macros in the yylval and yylloc
+ declarations have been fixed.
+
+** Temporary hack for adding a semicolon to the user action.
+
+ Bison used to prepend a trailing semicolon at the end of the user
+ action for reductions. This allowed actions such as
+
+ exp: exp "+" exp { $$ = $1 + $3 };
+
+ instead of
+
+ exp: exp "+" exp { $$ = $1 + $3; };
+
+ Some grammars still depend on this "feature". Bison 2.4.1 restores
+ the previous behavior in the case of C output (specifically, when
+ neither %language or %skeleton or equivalent command-line options
+ are used) to leave more time for grammars depending on the old
+ behavior to be adjusted. Future releases of Bison will disable this
+ feature.
+
+** A few minor improvements to the Bison manual.
+
+* Changes in version 2.4 (2008-11-02):
+
+** %language is an experimental feature.
+
+ We first introduced this feature in test release 2.3b as a cleaner
+ alternative to %skeleton. Since then, we have discussed the possibility of
+ modifying its effect on Bison's output file names. Thus, in this release,
+ we consider %language to be an experimental feature that will likely evolve
+ in future releases.
+
+** Forward compatibility with GNU M4 has been improved.
+
+** Several bugs in the C++ skeleton and the experimental Java skeleton have been
+ fixed.
+
+* Changes in version 2.3b (2008-05-27):
+
+** The quotes around NAME that used to be required in the following directive
+ are now deprecated:
+
+ %define NAME "VALUE"
+
+** The directive "%pure-parser" is now deprecated in favor of:
+
+ %define api.pure
+
+ which has the same effect except that Bison is more careful to warn about
+ unreasonable usage in the latter case.
+
+** Push Parsing
+
+ Bison can now generate an LALR(1) parser in C with a push interface. That
+ is, instead of invoking "yyparse", which pulls tokens from "yylex", you can
+ push one token at a time to the parser using "yypush_parse", which will
+ return to the caller after processing each token. By default, the push
+ interface is disabled. Either of the following directives will enable it:
+
+ %define api.push_pull "push" // Just push; does not require yylex.
+ %define api.push_pull "both" // Push and pull; requires yylex.
+
+ See the new section "A Push Parser" in the Bison manual for details.
+
+ The current push parsing interface is experimental and may evolve. More user
+ feedback will help to stabilize it.
+
+** The -g and --graph options now output graphs in Graphviz DOT format,
+ not VCG format. Like --graph, -g now also takes an optional FILE argument
+ and thus cannot be bundled with other short options.
+
+** Java
+
+ Bison can now generate an LALR(1) parser in Java. The skeleton is
+ "data/lalr1.java". Consider using the new %language directive instead of
+ %skeleton to select it.
+
+ See the new section "Java Parsers" in the Bison manual for details.
+
+ The current Java interface is experimental and may evolve. More user
+ feedback will help to stabilize it.
+ Contributed by Paolo Bonzini.
+
+** %language
+
+ This new directive specifies the programming language of the generated
+ parser, which can be C (the default), C++, or Java. Besides the skeleton
+ that Bison uses, the directive affects the names of the generated files if
+ the grammar file's name ends in ".y".
+
+** XML Automaton Report
+
+ Bison can now generate an XML report of the LALR(1) automaton using the new
+ "--xml" option. The current XML schema is experimental and may evolve. More
+ user feedback will help to stabilize it.
+ Contributed by Wojciech Polak.
+
+** The grammar file may now specify the name of the parser header file using