## Invalid $n. ##
## ------------ ##
-AT_SETUP([Invalid dollar-n])
+AT_SETUP([Invalid \$n and @n])
AT_DATA([input.y],
[[%%
exp: { $$ = $1 ; };
-]])
-
-AT_CHECK([bison input.y], [1], [],
-[[input.y:2.13-14: integer out of range: `$1'
-]])
-
-AT_CLEANUP
-
-
-## ------------ ##
-## Invalid @n. ##
-## ------------ ##
-
-AT_SETUP([Invalid @n])
-
-AT_DATA([input.y],
-[[%%
exp: { @$ = @1 ; };
]])
AT_CHECK([bison input.y], [1], [],
-[[input.y:2.13-14: integer out of range: `@1'
+[[input.y:2.13-14: integer out of range: `$1'
+input.y:3.13-14: integer out of range: `@1'
]])
AT_CLEANUP
AT_SETUP([Type Clashes])
AT_DATA([input.y],
-[[%token foo
+[[%union { int bar; }
+%token foo
%type <bar> exp
%%
-exp: foo {} foo
+exp: foo { $$; } foo { $2; } foo
| foo
| /* Empty. */
;
]])
-AT_CHECK([bison input.y], [], [],
-[[input.y:4.6-15: warning: type clash on default action: <bar> != <>
-input.y:5.6-8: warning: type clash on default action: <bar> != <>
-input.y:6.5: warning: empty rule for typed nonterminal, and no action
+AT_CHECK([bison input.y], [1], [],
+[[input.y:5.12-13: $$ for the midrule at $2 of `exp' has no declared type
+input.y:5.24-25: $2 of `exp' has no declared type
+input.y:5.6-32: warning: type clash on default action: <bar> != <>
+input.y:6.6-8: warning: type clash on default action: <bar> != <>
+input.y:7.5: warning: empty rule for typed nonterminal, and no action
]])
AT_CLEANUP
+# _AT_UNUSED_VALUES_DECLARATIONS()
+# --------------------------------------------
+# Generate the token, type, and destructor
+# declarations for the unused values tests.
+
+m4_define([_AT_UNUSED_VALUES_DECLARATIONS],
+[[[%token <integer> INT;
+%type <integer> a b c d e f g h i j k l;
+%destructor { destroy ($$); } INT a b c d e f g h i j k l;]]])
+
+
+# AT_CHECK_UNUSED_VALUES(DECLARATIONS_AFTER)
+# --------------------------------------------
+# Generate a grammar to test unused values,
+# compile it, run it. If DECLARATIONS_AFTER
+# is set, then the token, type, and destructor
+# declarations are generated after the rules
+# rather than before.
+
+m4_define([AT_CHECK_UNUSED_VALUES],
+[AT_DATA([input.y],
+m4_ifval($1, [
+
+
+], [_AT_UNUSED_VALUES_DECLARATIONS
+])[[%%
+start:
+ 'a' a { $]2[ } | 'b' b { $]2[ } | 'c' c { $]2[ } | 'd' d { $]2[ } | 'e' e { $]2[ }
+| 'f' f { $]2[ } | 'g' g { $]2[ } | 'h' h { $]2[ } | 'i' i { $]2[ } | 'j' j { $]2[ }
+| 'k' k { $]2[ } | 'l' l { $]2[ }
+;
+
+a: INT | INT { } INT { } INT { };
+b: INT | /* empty */;
+c: INT | INT { $]1[ } INT { } INT { };
+d: INT | INT { } INT { $]1[ } INT { };
+e: INT | INT { } INT { } INT { $]1[ };
+f: INT | INT { } INT { } INT { $]$[ = $]1[ + $]3[ + $]5[; };
+g: INT | INT { $<integer>$; } INT { $<integer>$; } INT { };
+h: INT | INT { $<integer>$; } INT { $<integer>$ = $<integer>2; } INT { };
+i: INT | INT INT { } { $]$[ = $]1[ + $]2[; };
+j: INT | INT INT { $<integer>$ = 1; } { $]$[ = $]1[ + $]2[; };
+k: INT | INT INT { $<integer>$; } { $<integer>$ = $<integer>3; } { };
+l: INT | INT { $<integer>$ = $<integer>1; } INT { $<integer>$ = $<integer>2 + $<integer>3; } INT { $<integer>$ = $<integer>4 + $<integer>5; };]]m4_ifval($1, [
+_AT_UNUSED_VALUES_DECLARATIONS])
+)
+
+AT_CHECK([bison input.y], [0], [],
+[[input.y:11.10-32: warning: unset value: $]$[
+input.y:11.10-32: warning: unused value: $]1[
+input.y:11.10-32: warning: unused value: $]3[
+input.y:11.10-32: warning: unused value: $]5[
+input.y:12.9: warning: empty rule for typed nonterminal, and no action
+input.y:13.10-35: warning: unset value: $]$[
+input.y:13.10-35: warning: unused value: $]3[
+input.y:13.10-35: warning: unused value: $]5[
+input.y:14.10-35: warning: unset value: $]$[
+input.y:14.10-35: warning: unused value: $]3[
+input.y:14.10-35: warning: unused value: $]5[
+input.y:15.10-36: warning: unset value: $]$[
+input.y:15.10-36: warning: unused value: $]3[
+input.y:15.10-36: warning: unused value: $]5[
+input.y:17.10-58: warning: unset value: $]$[
+input.y:17.10-58: warning: unused value: $]1[
+input.y:17.10-58: warning: unused value: $]2[
+input.y:17.10-58: warning: unused value: $]3[
+input.y:17.10-58: warning: unused value: $]4[
+input.y:17.10-58: warning: unused value: $]5[
+input.y:18.10-72: warning: unset value: $]$[
+input.y:18.10-72: warning: unused value: $]1[
+input.y:18.10-72: warning: unused value: $]3[
+input.y:18.10-72: warning: unused value: $]4[
+input.y:18.10-72: warning: unused value: $]5[
+input.y:20.10-55: warning: unused value: $]3[
+input.y:21.10-68: warning: unset value: $]$[
+input.y:21.10-68: warning: unused value: $]1[
+input.y:21.10-68: warning: unused value: $]2[
+input.y:21.10-68: warning: unused value: $]4[
+]])])
+
+
## --------------- ##
## Unused values. ##
## --------------- ##
-m4_define([AT_CHECK_UNUSED_VALUES],
-[AT_SETUP([Unused values])
+AT_SETUP([Unused values])
+AT_CHECK_UNUSED_VALUES
+AT_CLEANUP
+
+
+## ------------------------------------------ ##
+## Unused values before symbol declarations. ##
+## ------------------------------------------ ##
+
+AT_SETUP([Unused values before symbol declarations])
+AT_CHECK_UNUSED_VALUES([1])
+AT_CLEANUP
+
+
+## --------------------------------------------- ##
+## Default %printer and %destructor redeclared. ##
+## --------------------------------------------- ##
+
+AT_SETUP([Default %printer and %destructor redeclared])
+
+AT_DATA([[input.y]],
+[[%destructor { destroy ($$); } %symbol-default %symbol-default
+%printer { destroy ($$); } %symbol-default %symbol-default
+
+%destructor { destroy ($$); } %symbol-default
+%printer { destroy ($$); } %symbol-default
-AT_DATA([input.y],
-[[%token <integer> INT
-%type <integer> exp
%%
-exp:
- $1
-| INT
-;
+
+start: ;
+
+%destructor { destroy ($$); } %symbol-default;
+%printer { destroy ($$); } %symbol-default;
]])
-AT_CHECK([bison input.y], [], [],
-[[$2]])
+AT_CHECK([bison input.y], [1], [],
+[[input.y:1.13-29: redeclaration for default %destructor
+input.y:1.13-29: previous declaration
+input.y:2.10-26: redeclaration for default %printer
+input.y:2.10-26: previous declaration
+input.y:4.13-29: redeclaration for default %destructor
+input.y:1.13-29: previous declaration
+input.y:5.10-26: redeclaration for default %printer
+input.y:2.10-26: previous declaration
+input.y:11.13-29: redeclaration for default %destructor
+input.y:4.13-29: previous declaration
+input.y:12.10-26: redeclaration for default %printer
+input.y:5.10-26: previous declaration
+]])
AT_CLEANUP
-])
-AT_CHECK_UNUSED_VALUES([INT { } INT { } INT { }],
-[input.y:5.3-25: warning: unset value: $$
-input.y:5.3-25: warning: unused value: $1
-input.y:5.3-25: warning: unused value: $3
-input.y:5.3-25: warning: unused value: $5
-])
-AT_CHECK_UNUSED_VALUES([INT { $1 } INT { } INT { }],
-[input.y:5.3-28: warning: unset value: $$
-input.y:5.3-28: warning: unused value: $3
-input.y:5.3-28: warning: unused value: $5
-])
+## ---------------------------------------------- ##
+## Per-type %printer and %destructor redeclared. ##
+## ---------------------------------------------- ##
-AT_CHECK_UNUSED_VALUES([INT { } INT { $1 } INT { }],
-[input.y:5.3-28: warning: unset value: $$
-input.y:5.3-28: warning: unused value: $3
-input.y:5.3-28: warning: unused value: $5
-])
+AT_SETUP([Per-type %printer and %destructor redeclared])
-AT_CHECK_UNUSED_VALUES([INT { } INT { } INT { $1 }],
-[input.y:5.3-29: warning: unset value: $$
-input.y:5.3-29: warning: unused value: $3
-input.y:5.3-29: warning: unused value: $5
-])
+AT_DATA([[input.y]],
+[[%destructor { destroy ($$); } <field1> <field2>
+%printer { destroy ($$); } <field1> <field2>
-AT_CHECK_UNUSED_VALUES([INT { } INT { } INT { $$ = $1 + $3 + $5; }])
+%destructor { destroy ($$); } <field1> <field1>
+%printer { destroy ($$); } <field2> <field2>
-# Checking mid-rule values.
-AT_CHECK_UNUSED_VALUES([INT { $$ } INT { $$ } INT { }],
-[input.y:5.3-31: warning: unset value: $$
-input.y:5.3-31: warning: unused value: $1
-input.y:5.3-31: warning: unused value: $2
-input.y:5.3-31: warning: unused value: $3
-input.y:5.3-31: warning: unused value: $4
-input.y:5.3-31: warning: unused value: $5
-])
+%%
+
+start: ;
+
+%destructor { destroy ($$); } <field2> <field1>;
+%printer { destroy ($$); } <field2> <field1>;
+]])
+
+AT_CHECK([bison input.y], [1], [],
+[[input.y:4.13-29: %destructor redeclaration for <field1>
+input.y:1.13-29: previous declaration
+input.y:4.13-29: %destructor redeclaration for <field1>
+input.y:4.13-29: previous declaration
+input.y:5.10-26: %printer redeclaration for <field2>
+input.y:2.10-26: previous declaration
+input.y:5.10-26: %printer redeclaration for <field2>
+input.y:5.10-26: previous declaration
+input.y:11.13-29: %destructor redeclaration for <field1>
+input.y:4.13-29: previous declaration
+input.y:11.13-29: %destructor redeclaration for <field2>
+input.y:1.13-29: previous declaration
+input.y:12.10-26: %printer redeclaration for <field1>
+input.y:2.10-26: previous declaration
+input.y:12.10-26: %printer redeclaration for <field2>
+input.y:5.10-26: previous declaration
+]])
+
+AT_CLEANUP
-AT_CHECK_UNUSED_VALUES([INT { $$ } INT { $$ = $2 } INT { }],
-[input.y:5.3-36: warning: unset value: $$
-input.y:5.3-36: warning: unused value: $1
-input.y:5.3-36: warning: unused value: $3
-input.y:5.3-36: warning: unused value: $4
-input.y:5.3-36: warning: unused value: $5
-])
-# AT_CHECK_UNUSED_VALUES([INT { $$ } { $$ = $2 } { }],
-# [input.y:5.3-36: warning: unset value: $$
-# input.y:5.3-36: warning: unused value: $1
-# input.y:5.3-36: warning: unused value: $3
-# input.y:5.3-36: warning: unused value: $4
-# input.y:5.3-36: warning: unused value: $5
-# ])
+## ---------------------------------------- ##
+## Unused values with default %destructor. ##
+## ---------------------------------------- ##
-AT_CHECK_UNUSED_VALUES([INT { $$ = $1 } INT { $$ = $2 + $3 } INT { $$ = $4 + $5 }])
+AT_SETUP([Unused values with default %destructor])
+AT_DATA([[input.y]],
+[[%destructor { destroy ($$); } %symbol-default
+
+%%
+
+start: end end { $1; } ;
+end: { } ;
+]])
+
+AT_CHECK([bison input.y], [0], [],
+[[input.y:5.8-22: warning: unset value: $$
+input.y:5.8-22: warning: unused value: $2
+input.y:6.6-8: warning: unset value: $$
+]])
+
+AT_CLEANUP
+
+
+## ----------------------------------------- ##
+## Unused values with per-type %destructor. ##
+## ----------------------------------------- ##
+
+AT_SETUP([Unused values with per-type %destructor])
+
+AT_DATA([[input.y]],
+[[%destructor { destroy ($$); } <field1>
+%type <field1> start end
+
+%%
+
+start: end end { $1; } ;
+end: { } ;
+]])
+
+AT_CHECK([bison input.y], [0], [],
+[[input.y:6.8-22: warning: unset value: $$
+input.y:6.8-22: warning: unused value: $2
+input.y:7.6-8: warning: unset value: $$
+]])
+
+AT_CLEANUP
## ---------------------- ##
AT_CHECK([bison input.y], [1], [],
[[input.y:8.7-11: %type redeclaration for foo
-input.y:3.7-11: first declaration
+input.y:3.7-11: previous declaration
input.y:10.13-17: %destructor redeclaration for foo
-input.y:5.13-17: first declaration
-input.y:9.19-23: %printer redeclaration for foo
-input.y:10.13-17: first declaration
+input.y:5.13-17: previous declaration
+input.y:9.10-14: %printer redeclaration for foo
+input.y:4.10-14: previous declaration
input.y:11.1-5: %left redeclaration for foo
-input.y:6.1-5: first declaration
+input.y:6.1-5: previous declaration
]])
AT_CLEANUP
]])
+AT_DATA([input.y],
+[{}
+])
+AT_CHECK([bison input.y], [1], [],
+[[input.y:1.1-2: syntax error, unexpected {...}
+]])
+
+
AT_DATA_GRAMMAR([input.y],
[[%{
/* This is seen in GCC: a %{ and %} in middle of a comment. */
#endif
#include <stdio.h>
+#include <stdlib.h>
%}
/* %{ and %} can be here too. */
static int
yylex (void)
{
- static const char *input = "@<:@\1\2$@{@oline@__@&t@oline__\
+ static char const input[] = "@<:@\1\2$@{@oline@__@&t@oline__\
#output "; /* "
*/
- yylval = value_as_yystype (*input);
- return *input++;
+ static size_t toknum;
+ if (! (toknum < sizeof input))
+ abort ();
+ yylval = value_as_yystype (input[toknum]);
+ return input[toknum++];
}
static void
AT_CHECK_REQUIRE(AT_PACKAGE_VERSION, 0)
## FIXME: Some day augment this version number.
AT_CHECK_REQUIRE(100.0, 63)
+
+
+## ------------------------------------- ##
+## String aliases for character tokens. ##
+## ------------------------------------- ##
+
+AT_SETUP([String aliases for character tokens])
+
+# Bison once thought a character token and its alias were different symbols
+# with the same user token number.
+
+AT_DATA_GRAMMAR([input.y],
+[[%token 'a' "a"
+%%
+start: 'a';
+%%
+]])
+
+AT_CHECK([bison -o input.c input.y])
+
+AT_CLEANUP
+
+
+## --------------------- ##
+## Unclosed constructs. ##
+## --------------------- ##
+
+AT_SETUP([Unclosed constructs])
+
+# Bison's scan-gram.l once forgot to STRING_FINISH some unclosed constructs, so
+# they were prepended to whatever it STRING_GROW'ed next. It also threw them
+# away rather than returning them to the parser. The effect was confusing
+# subsequent error messages.
+
+AT_DATA([input.y],
+[[%token A "a
+%token B "b"
+%token AB "ab" // Used to complain that "ab" was already used.
+%token C '1
+%token TWO "2"
+%token TICK_TWELVE "'12" // Used to complain that "'12" was already used.
+
+%%
+
+start: ;
+
+// Used to report a syntax error because it didn't see any kind of symbol
+// identifier.
+%type <f> 'a
+;
+%type <f> "a
+;
+// Used to report a syntax error because it didn't see braced code.
+%destructor { free ($$)
+]])
+
+AT_CHECK([bison -o input.c input.y], 1, [],
+[[input.y:1.10-2.0: missing `"' at end of line
+input.y:4.10-5.0: missing `'' at end of line
+input.y:14.11-15.0: missing `'' at end of line
+input.y:16.11-17.0: missing `"' at end of line
+input.y:19.13-20.0: missing `}' at end of file
+input.y:20.1: syntax error, unexpected end of file
+]])
+
+AT_CLEANUP
+
+
+## ------------------------- ##
+## %start after first rule. ##
+## ------------------------- ##
+
+AT_SETUP([%start after first rule])
+
+# Bison once complained that a %start after the first rule was a redeclaration
+# of the start symbol.
+
+AT_DATA([input.y],
+[[%%
+false_start: ;
+start: false_start ;
+%start start;
+]])
+
+AT_CHECK([bison -o input.c input.y])
+
+AT_CLEANUP
projects / bison.git / blobdiff