# Exercising Bison on actual grammars. -*- Autotest -*-
-# Copyright (C) 2002 Free Software Foundation, Inc.
+
+# Copyright (C) 1989, 1990, 1991, 1992, 2000, 2001, 2002, 2003, 2004
+# Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
AT_BANNER([[Existing Grammars.]])
## ----------------- ##
AT_DATA([[input.y]],
[[%union {
- long token;
- long ival;
- long arrdim;
+ long int token;
+ long int ival;
+ long int arrdim;
double rval;
char *ident;
char *tval;
LISTV : HIDENTIFIER { regDecl($1, type, KNOKD, CDEFLT);}
| FPP_CATEG HDOTDOTDOT { regDecl(varargsid, TVARARGS, KNOKD, categ);}
| HIDENTIFIER { regDecl($1, type, KNOKD, CDEFLT);}
- HPAREXPSEPARATOR LISTV
+ HPAREXPSEPARATOR LISTV {}
| FPP_SPEC
| FPP_SPEC
HPAREXPSEPARATOR LISTV
IDENTIFIER_LISTV: HIDENTIFIER { regDecl($1, type, kind, categ);}
| HDOTDOTDOT { regDecl(varargsid, TVARARGS, kind, categ);}
| HIDENTIFIER { regDecl($1, type, kind, categ);}
- HPAREXPSEPARATOR IDENTIFIER_LISTV
+ HPAREXPSEPARATOR IDENTIFIER_LISTV {}
;
MBEE_MODE_PART : /*EMPT*/
| MODE_PART
| HNONE { mout(MNONE);$$=NULL;}
| HIDENTIFIER
{ $<ident>$=$1;}
- MBEE_ARG_R_PT
+ MBEE_ARG_R_PT {}
| HTHIS HIDENTIFIER { mout(MTHIS);
moutId($2);$$=NULL;}
| HNEW
# don't actually check the output. But SEGV is watching us, and
# so might do dmalloc.
AT_CHECK([[bison --verbose --defines input.y]], 0, [],
-[[input.y contains 78 shift/reduce conflicts and 10 reduce/reduce conflicts.
+[[input.y: conflicts: 78 shift/reduce, 10 reduce/reduce
]])
-AT_CHECK([[grep '^State.*contains' input.output]], 0,
-[[State 64 contains 14 shift/reduce conflicts.
-State 164 contains 1 shift/reduce conflict.
-State 201 contains 33 shift/reduce conflicts and 4 reduce/reduce conflicts.
-State 206 contains 1 shift/reduce conflict.
-State 240 contains 1 shift/reduce conflict.
-State 335 contains 9 shift/reduce conflicts and 2 reduce/reduce conflicts.
-State 356 contains 1 shift/reduce conflict.
-State 360 contains 9 shift/reduce conflicts and 2 reduce/reduce conflicts.
-State 427 contains 9 shift/reduce conflicts and 2 reduce/reduce conflicts.
+AT_CHECK([[grep '^State.*conflicts:' input.output]], 0,
+[[State 64 conflicts: 14 shift/reduce
+State 164 conflicts: 1 shift/reduce
+State 201 conflicts: 33 shift/reduce, 4 reduce/reduce
+State 206 conflicts: 1 shift/reduce
+State 240 conflicts: 1 shift/reduce
+State 335 conflicts: 9 shift/reduce, 2 reduce/reduce
+State 356 conflicts: 1 shift/reduce
+State 360 conflicts: 9 shift/reduce, 2 reduce/reduce
+State 427 conflicts: 9 shift/reduce, 2 reduce/reduce
]])
AT_CLEANUP
+
+
+## ----------------- ##
+## GNU pic Grammar. ##
+## ----------------- ##
+
+AT_SETUP([GNU pic Grammar])
+
+# GNU pic, part of groff.
+
+# Bison once reported shift/reduce conflicts that it shouldn't have.
+
+AT_DATA([[input.y]],
+[[%union {
+ char *str;
+ int n;
+ double x;
+ struct { double x, y; } pair;
+ struct { double x; char *body; } if_data;
+ struct { char *str; const char *filename; int lineno; } lstr;
+ struct { double *v; int nv; int maxv; } dv;
+ struct { double val; int is_multiplicative; } by;
+ place pl;
+ object *obj;
+ corner crn;
+ path *pth;
+ object_spec *spec;
+ saved_state *pstate;
+ graphics_state state;
+ object_type obtype;
+}
+
+%token <str> LABEL
+%token <str> VARIABLE
+%token <x> NUMBER
+%token <lstr> TEXT
+%token <lstr> COMMAND_LINE
+%token <str> DELIMITED
+%token <n> ORDINAL
+%token TH
+%token LEFT_ARROW_HEAD
+%token RIGHT_ARROW_HEAD
+%token DOUBLE_ARROW_HEAD
+%token LAST
+%token UP
+%token DOWN
+%token LEFT
+%token RIGHT
+%token BOX
+%token CIRCLE
+%token ELLIPSE
+%token ARC
+%token LINE
+%token ARROW
+%token MOVE
+%token SPLINE
+%token HEIGHT
+%token RADIUS
+%token WIDTH
+%token DIAMETER
+%token FROM
+%token TO
+%token AT
+%token WITH
+%token BY
+%token THEN
+%token SOLID
+%token DOTTED
+%token DASHED
+%token CHOP
+%token SAME
+%token INVISIBLE
+%token LJUST
+%token RJUST
+%token ABOVE
+%token BELOW
+%token OF
+%token THE
+%token WAY
+%token BETWEEN
+%token AND
+%token HERE
+%token DOT_N
+%token DOT_E
+%token DOT_W
+%token DOT_S
+%token DOT_NE
+%token DOT_SE
+%token DOT_NW
+%token DOT_SW
+%token DOT_C
+%token DOT_START
+%token DOT_END
+%token DOT_X
+%token DOT_Y
+%token DOT_HT
+%token DOT_WID
+%token DOT_RAD
+%token SIN
+%token COS
+%token ATAN2
+%token LOG
+%token EXP
+%token SQRT
+%token K_MAX
+%token K_MIN
+%token INT
+%token RAND
+%token SRAND
+%token COPY
+%token THRU
+%token TOP
+%token BOTTOM
+%token UPPER
+%token LOWER
+%token SH
+%token PRINT
+%token CW
+%token CCW
+%token FOR
+%token DO
+%token IF
+%token ELSE
+%token ANDAND
+%token OROR
+%token NOTEQUAL
+%token EQUALEQUAL
+%token LESSEQUAL
+%token GREATEREQUAL
+%token LEFT_CORNER
+%token RIGHT_CORNER
+%token NORTH
+%token SOUTH
+%token EAST
+%token WEST
+%token CENTER
+%token END
+%token START
+%token RESET
+%token UNTIL
+%token PLOT
+%token THICKNESS
+%token FILL
+%token COLORED
+%token OUTLINED
+%token SHADED
+%token ALIGNED
+%token SPRINTF
+%token COMMAND
+
+%left '.'
+
+/* this ensures that plot 17 "%g" parses as (plot 17 "%g") */
+%left PLOT
+%left TEXT SPRINTF
+
+/* give text adjustments higher precedence than TEXT, so that
+box "foo" above ljust == box ("foo" above ljust)
+*/
+
+%left LJUST RJUST ABOVE BELOW
+
+%left LEFT RIGHT
+/* Give attributes that take an optional expression a higher
+precedence than left and right, so that eg `line chop left'
+parses properly. */
+%left CHOP SOLID DASHED DOTTED UP DOWN FILL COLORED OUTLINED
+%left LABEL
+
+%left VARIABLE NUMBER '(' SIN COS ATAN2 LOG EXP SQRT K_MAX K_MIN INT RAND SRAND LAST
+%left ORDINAL HERE '`'
+
+%left BOX CIRCLE ELLIPSE ARC LINE ARROW SPLINE '[' /* ] */
+
+/* these need to be lower than '-' */
+%left HEIGHT RADIUS WIDTH DIAMETER FROM TO AT THICKNESS
+
+/* these must have higher precedence than CHOP so that `label %prec CHOP'
+works */
+%left DOT_N DOT_E DOT_W DOT_S DOT_NE DOT_SE DOT_NW DOT_SW DOT_C
+%left DOT_START DOT_END TOP BOTTOM LEFT_CORNER RIGHT_CORNER
+%left UPPER LOWER NORTH SOUTH EAST WEST CENTER START END
+
+%left ','
+%left OROR
+%left ANDAND
+%left EQUALEQUAL NOTEQUAL
+%left '<' '>' LESSEQUAL GREATEREQUAL
+
+%left BETWEEN OF
+%left AND
+
+%left '+' '-'
+%left '*' '/' '%'
+%right '!'
+%right '^'
+
+%type <x> expr any_expr text_expr
+%type <by> optional_by
+%type <pair> expr_pair position_not_place
+%type <if_data> simple_if
+%type <obj> nth_primitive
+%type <crn> corner
+%type <pth> path label_path relative_path
+%type <pl> place label element element_list middle_element_list
+%type <spec> object_spec
+%type <pair> position
+%type <obtype> object_type
+%type <n> optional_ordinal_last ordinal
+%type <str> until
+%type <dv> sprintf_args
+%type <lstr> text print_args print_arg
+
+%%
+
+top:
+ optional_separator
+ | element_list
+ {
+ if (olist.head)
+ print_picture(olist.head);
+ }
+ ;
+
+
+element_list:
+ optional_separator middle_element_list optional_separator
+ { $$ = $2; }
+ ;
+
+middle_element_list:
+ element
+ { $$ = $1; }
+ | middle_element_list separator element
+ { $$ = $1; }
+ ;
+
+optional_separator:
+ /* empty */
+ | separator
+ ;
+
+separator:
+ ';'
+ | separator ';'
+ ;
+
+placeless_element:
+ VARIABLE '=' any_expr
+ {
+ define_variable($1, $3);
+ a_delete $1;
+ }
+ | VARIABLE ':' '=' any_expr
+ {
+ place *p = lookup_label($1);
+ if (!p) {
+ lex_error("variable `%1' not defined", $1);
+ YYABORT;
+ }
+ p->obj = 0;
+ p->x = $4;
+ p->y = 0.0;
+ a_delete $1;
+ }
+ | UP
+ { current_direction = UP_DIRECTION; }
+ | DOWN
+ { current_direction = DOWN_DIRECTION; }
+ | LEFT
+ { current_direction = LEFT_DIRECTION; }
+ | RIGHT
+ { current_direction = RIGHT_DIRECTION; }
+ | COMMAND_LINE
+ {
+ olist.append(make_command_object($1.str, $1.filename,
+ $1.lineno));
+ }
+ | COMMAND print_args
+ {
+ olist.append(make_command_object($2.str, $2.filename,
+ $2.lineno));
+ }
+ | PRINT print_args
+ {
+ fprintf(stderr, "%s\n", $2.str);
+ a_delete $2.str;
+ fflush(stderr);
+ }
+ | SH
+ { delim_flag = 1; }
+ DELIMITED
+ {
+ delim_flag = 0;
+ if (safer_flag)
+ lex_error("unsafe to run command `%1'", $3);
+ else
+ system($3);
+ a_delete $3;
+ }
+ | COPY TEXT
+ {
+ if (yychar < 0)
+ do_lookahead();
+ do_copy($2.str);
+ // do not delete the filename
+ }
+ | COPY TEXT THRU
+ { delim_flag = 2; }
+ DELIMITED
+ { delim_flag = 0; }
+ until
+ {
+ if (yychar < 0)
+ do_lookahead();
+ copy_file_thru($2.str, $5, $7);
+ // do not delete the filename
+ a_delete $5;
+ a_delete $7;
+ }
+ | COPY THRU
+ { delim_flag = 2; }
+ DELIMITED
+ { delim_flag = 0; }
+ until
+ {
+ if (yychar < 0)
+ do_lookahead();
+ copy_rest_thru($4, $6);
+ a_delete $4;
+ a_delete $6;
+ }
+ | FOR VARIABLE '=' expr TO expr optional_by DO
+ { delim_flag = 1; }
+ DELIMITED
+ {
+ delim_flag = 0;
+ if (yychar < 0)
+ do_lookahead();
+ do_for($2, $4, $6, $7.is_multiplicative, $7.val, $10);
+ }
+ | simple_if
+ {
+ if (yychar < 0)
+ do_lookahead();
+ if ($1.x != 0.0)
+ push_body($1.body);
+ a_delete $1.body;
+ }
+ | simple_if ELSE
+ { delim_flag = 1; }
+ DELIMITED
+ {
+ delim_flag = 0;
+ if (yychar < 0)
+ do_lookahead();
+ if ($1.x != 0.0)
+ push_body($1.body);
+ else
+ push_body($4);
+ a_delete $1.body;
+ a_delete $4;
+ }
+ | reset_variables
+ | RESET
+ { define_variable("scale", 1.0); }
+ ;
+
+reset_variables:
+ RESET VARIABLE
+ {
+ reset($2);
+ a_delete $2;
+ }
+ | reset_variables VARIABLE
+ {
+ reset($2);
+ a_delete $2;
+ }
+ | reset_variables ',' VARIABLE
+ {
+ reset($3);
+ a_delete $3;
+ }
+ ;
+
+print_args:
+ print_arg
+ { $$ = $1; }
+ | print_args print_arg
+ {
+ $$.str = new char[strlen($1.str) + strlen($2.str) + 1];
+ strcpy($$.str, $1.str);
+ strcat($$.str, $2.str);
+ a_delete $1.str;
+ a_delete $2.str;
+ if ($1.filename) {
+ $$.filename = $1.filename;
+ $$.lineno = $1.lineno;
+ }
+ else if ($2.filename) {
+ $$.filename = $2.filename;
+ $$.lineno = $2.lineno;
+ }
+ }
+ ;
+
+print_arg:
+ expr %prec ','
+ {
+ $$.str = new char[GDIGITS + 1];
+ sprintf($$.str, "%g", $1);
+ $$.filename = 0;
+ $$.lineno = 0;
+ }
+ | text
+ { $$ = $1; }
+ | position %prec ','
+ {
+ $$.str = new char[GDIGITS + 2 + GDIGITS + 1];
+ sprintf($$.str, "%g, %g", $1.x, $1.y);
+ $$.filename = 0;
+ $$.lineno = 0;
+ }
+ ;
+
+simple_if:
+ IF any_expr THEN
+ { delim_flag = 1; }
+ DELIMITED
+ {
+ delim_flag = 0;
+ $$.x = $2;
+ $$.body = $5;
+ }
+ ;
+
+until:
+ /* empty */
+ { $$ = 0; }
+ | UNTIL TEXT
+ { $$ = $2.str; }
+ ;
+
+any_expr:
+ expr
+ { $$ = $1; }
+ | text_expr
+ { $$ = $1; }
+ ;
+
+text_expr:
+ text EQUALEQUAL text
+ {
+ $$ = strcmp($1.str, $3.str) == 0;
+ a_delete $1.str;
+ a_delete $3.str;
+ }
+ | text NOTEQUAL text
+ {
+ $$ = strcmp($1.str, $3.str) != 0;
+ a_delete $1.str;
+ a_delete $3.str;
+ }
+ | text_expr ANDAND text_expr
+ { $$ = ($1 != 0.0 && $3 != 0.0); }
+ | text_expr ANDAND expr
+ { $$ = ($1 != 0.0 && $3 != 0.0); }
+ | expr ANDAND text_expr
+ { $$ = ($1 != 0.0 && $3 != 0.0); }
+ | text_expr OROR text_expr
+ { $$ = ($1 != 0.0 || $3 != 0.0); }
+ | text_expr OROR expr
+ { $$ = ($1 != 0.0 || $3 != 0.0); }
+ | expr OROR text_expr
+ { $$ = ($1 != 0.0 || $3 != 0.0); }
+ | '!' text_expr
+ { $$ = ($2 == 0.0); }
+ ;
+
+
+optional_by:
+ /* empty */
+ {
+ $$.val = 1.0;
+ $$.is_multiplicative = 0;
+ }
+ | BY expr
+ {
+ $$.val = $2;
+ $$.is_multiplicative = 0;
+ }
+ | BY '*' expr
+ {
+ $$.val = $3;
+ $$.is_multiplicative = 1;
+ }
+ ;
+
+element:
+ object_spec
+ {
+ $$.obj = $1->make_object(¤t_position,
+ ¤t_direction);
+ if ($$.obj == 0)
+ YYABORT;
+ delete $1;
+ if ($$.obj)
+ olist.append($$.obj);
+ else {
+ $$.x = current_position.x;
+ $$.y = current_position.y;
+ }
+ }
+ | LABEL ':' optional_separator element
+ {
+ $$ = $4;
+ define_label($1, & $$);
+ a_delete $1;
+ }
+ | LABEL ':' optional_separator position_not_place
+ {
+ $$.obj = 0;
+ $$.x = $4.x;
+ $$.y = $4.y;
+ define_label($1, & $$);
+ a_delete $1;
+ }
+ | LABEL ':' optional_separator place
+ {
+ $$ = $4;
+ define_label($1, & $$);
+ a_delete $1;
+ }
+ | '{'
+ {
+ $<state>$.x = current_position.x;
+ $<state>$.y = current_position.y;
+ $<state>$.dir = current_direction;
+ }
+ element_list '}'
+ {
+ current_position.x = $<state>2.x;
+ current_position.y = $<state>2.y;
+ current_direction = $<state>2.dir;
+ }
+ optional_element
+ {
+ $$ = $3;
+ }
+ | placeless_element
+ {
+ $$.obj = 0;
+ $$.x = current_position.x;
+ $$.y = current_position.y;
+ }
+ ;
+
+optional_element:
+ /* empty */
+ {}
+ | element
+ {}
+ ;
+
+object_spec:
+ BOX
+ { $$ = new object_spec(BOX_OBJECT); }
+ | CIRCLE
+ { $$ = new object_spec(CIRCLE_OBJECT); }
+ | ELLIPSE
+ { $$ = new object_spec(ELLIPSE_OBJECT); }
+ | ARC
+ {
+ $$ = new object_spec(ARC_OBJECT);
+ $$->dir = current_direction;
+ }
+ | LINE
+ {
+ $$ = new object_spec(LINE_OBJECT);
+ lookup_variable("lineht", & $$->segment_height);
+ lookup_variable("linewid", & $$->segment_width);
+ $$->dir = current_direction;
+ }
+ | ARROW
+ {
+ $$ = new object_spec(ARROW_OBJECT);
+ lookup_variable("lineht", & $$->segment_height);
+ lookup_variable("linewid", & $$->segment_width);
+ $$->dir = current_direction;
+ }
+ | MOVE
+ {
+ $$ = new object_spec(MOVE_OBJECT);
+ lookup_variable("moveht", & $$->segment_height);
+ lookup_variable("movewid", & $$->segment_width);
+ $$->dir = current_direction;
+ }
+ | SPLINE
+ {
+ $$ = new object_spec(SPLINE_OBJECT);
+ lookup_variable("lineht", & $$->segment_height);
+ lookup_variable("linewid", & $$->segment_width);
+ $$->dir = current_direction;
+ }
+ | text %prec TEXT
+ {
+ $$ = new object_spec(TEXT_OBJECT);
+ $$->text = new text_item($1.str, $1.filename, $1.lineno);
+ }
+ | PLOT expr
+ {
+ $$ = new object_spec(TEXT_OBJECT);
+ $$->text = new text_item(format_number(0, $2), 0, -1);
+ }
+ | PLOT expr text
+ {
+ $$ = new object_spec(TEXT_OBJECT);
+ $$->text = new text_item(format_number($3.str, $2),
+ $3.filename, $3.lineno);
+ a_delete $3.str;
+ }
+ | '['
+ {
+ saved_state *p = new saved_state;
+ $<pstate>$ = p;
+ p->x = current_position.x;
+ p->y = current_position.y;
+ p->dir = current_direction;
+ p->tbl = current_table;
+ p->prev = current_saved_state;
+ current_position.x = 0.0;
+ current_position.y = 0.0;
+ current_table = new PTABLE(place);
+ current_saved_state = p;
+ olist.append(make_mark_object());
+ }
+ element_list ']'
+ {
+ current_position.x = $<pstate>2->x;
+ current_position.y = $<pstate>2->y;
+ current_direction = $<pstate>2->dir;
+ $$ = new object_spec(BLOCK_OBJECT);
+ olist.wrap_up_block(& $$->oblist);
+ $$->tbl = current_table;
+ current_table = $<pstate>2->tbl;
+ current_saved_state = $<pstate>2->prev;
+ delete $<pstate>2;
+ }
+ | object_spec HEIGHT expr
+ {
+ $$ = $1;
+ $$->height = $3;
+ $$->flags |= HAS_HEIGHT;
+ }
+ | object_spec RADIUS expr
+ {
+ $$ = $1;
+ $$->radius = $3;
+ $$->flags |= HAS_RADIUS;
+ }
+ | object_spec WIDTH expr
+ {
+ $$ = $1;
+ $$->width = $3;
+ $$->flags |= HAS_WIDTH;
+ }
+ | object_spec DIAMETER expr
+ {
+ $$ = $1;
+ $$->radius = $3/2.0;
+ $$->flags |= HAS_RADIUS;
+ }
+ | object_spec expr %prec HEIGHT
+ {
+ $$ = $1;
+ $$->flags |= HAS_SEGMENT;
+ switch ($$->dir) {
+ case UP_DIRECTION:
+ $$->segment_pos.y += $2;
+ break;
+ case DOWN_DIRECTION:
+ $$->segment_pos.y -= $2;
+ break;
+ case RIGHT_DIRECTION:
+ $$->segment_pos.x += $2;
+ break;
+ case LEFT_DIRECTION:
+ $$->segment_pos.x -= $2;
+ break;
+ }
+ }
+ | object_spec UP
+ {
+ $$ = $1;
+ $$->dir = UP_DIRECTION;
+ $$->flags |= HAS_SEGMENT;
+ $$->segment_pos.y += $$->segment_height;
+ }
+ | object_spec UP expr
+ {
+ $$ = $1;
+ $$->dir = UP_DIRECTION;
+ $$->flags |= HAS_SEGMENT;
+ $$->segment_pos.y += $3;
+ }
+ | object_spec DOWN
+ {
+ $$ = $1;
+ $$->dir = DOWN_DIRECTION;
+ $$->flags |= HAS_SEGMENT;
+ $$->segment_pos.y -= $$->segment_height;
+ }
+ | object_spec DOWN expr
+ {
+ $$ = $1;
+ $$->dir = DOWN_DIRECTION;
+ $$->flags |= HAS_SEGMENT;
+ $$->segment_pos.y -= $3;
+ }
+ | object_spec RIGHT
+ {
+ $$ = $1;
+ $$->dir = RIGHT_DIRECTION;
+ $$->flags |= HAS_SEGMENT;
+ $$->segment_pos.x += $$->segment_width;
+ }
+ | object_spec RIGHT expr
+ {
+ $$ = $1;
+ $$->dir = RIGHT_DIRECTION;
+ $$->flags |= HAS_SEGMENT;
+ $$->segment_pos.x += $3;
+ }
+ | object_spec LEFT
+ {
+ $$ = $1;
+ $$->dir = LEFT_DIRECTION;
+ $$->flags |= HAS_SEGMENT;
+ $$->segment_pos.x -= $$->segment_width;
+ }
+ | object_spec LEFT expr
+ {
+ $$ = $1;
+ $$->dir = LEFT_DIRECTION;
+ $$->flags |= HAS_SEGMENT;
+ $$->segment_pos.x -= $3;
+ }
+ | object_spec FROM position
+ {
+ $$ = $1;
+ $$->flags |= HAS_FROM;
+ $$->from.x = $3.x;
+ $$->from.y = $3.y;
+ }
+ | object_spec TO position
+ {
+ $$ = $1;
+ if ($$->flags & HAS_SEGMENT)
+ $$->segment_list = new segment($$->segment_pos,
+ $$->segment_is_absolute,
+ $$->segment_list);
+ $$->flags |= HAS_SEGMENT;
+ $$->segment_pos.x = $3.x;
+ $$->segment_pos.y = $3.y;
+ $$->segment_is_absolute = 1;
+ $$->flags |= HAS_TO;
+ $$->to.x = $3.x;
+ $$->to.y = $3.y;
+ }
+ | object_spec AT position
+ {
+ $$ = $1;
+ $$->flags |= HAS_AT;
+ $$->at.x = $3.x;
+ $$->at.y = $3.y;
+ if ($$->type != ARC_OBJECT) {
+ $$->flags |= HAS_FROM;
+ $$->from.x = $3.x;
+ $$->from.y = $3.y;
+ }
+ }
+ | object_spec WITH path
+ {
+ $$ = $1;
+ $$->flags |= HAS_WITH;
+ $$->with = $3;
+ }
+ | object_spec WITH position %prec ','
+ {
+ $$ = $1;
+ $$->flags |= HAS_WITH;
+ position pos;
+ pos.x = $3.x;
+ pos.y = $3.y;
+ $$->with = new path(pos);
+ }
+ | object_spec BY expr_pair
+ {
+ $$ = $1;
+ $$->flags |= HAS_SEGMENT;
+ $$->segment_pos.x += $3.x;
+ $$->segment_pos.y += $3.y;
+ }
+ | object_spec THEN
+ {
+ $$ = $1;
+ if ($$->flags & HAS_SEGMENT) {
+ $$->segment_list = new segment($$->segment_pos,
+ $$->segment_is_absolute,
+ $$->segment_list);
+ $$->flags &= ~HAS_SEGMENT;
+ $$->segment_pos.x = $$->segment_pos.y = 0.0;
+ $$->segment_is_absolute = 0;
+ }
+ }
+ | object_spec SOLID
+ {
+ $$ = $1; // nothing
+ }
+ | object_spec DOTTED
+ {
+ $$ = $1;
+ $$->flags |= IS_DOTTED;
+ lookup_variable("dashwid", & $$->dash_width);
+ }
+ | object_spec DOTTED expr
+ {
+ $$ = $1;
+ $$->flags |= IS_DOTTED;
+ $$->dash_width = $3;
+ }
+ | object_spec DASHED
+ {
+ $$ = $1;
+ $$->flags |= IS_DASHED;
+ lookup_variable("dashwid", & $$->dash_width);
+ }
+ | object_spec DASHED expr
+ {
+ $$ = $1;
+ $$->flags |= IS_DASHED;
+ $$->dash_width = $3;
+ }
+ | object_spec FILL
+ {
+ $$ = $1;
+ $$->flags |= IS_DEFAULT_FILLED;
+ }
+ | object_spec FILL expr
+ {
+ $$ = $1;
+ $$->flags |= IS_FILLED;
+ $$->fill = $3;
+ }
+ | object_spec SHADED text
+ {
+ $$ = $1;
+ $$->flags |= (IS_SHADED | IS_FILLED);
+ $$->shaded = new char[strlen($3.str)+1];
+ strcpy($$->shaded, $3.str);
+ }
+ | object_spec COLORED text
+ {
+ $$ = $1;
+ $$->flags |= (IS_SHADED | IS_OUTLINED | IS_FILLED);
+ $$->shaded = new char[strlen($3.str)+1];
+ strcpy($$->shaded, $3.str);
+ $$->outlined = new char[strlen($3.str)+1];
+ strcpy($$->outlined, $3.str);
+ }
+ | object_spec OUTLINED text
+ {
+ $$ = $1;
+ $$->flags |= IS_OUTLINED;
+ $$->outlined = new char[strlen($3.str)+1];
+ strcpy($$->outlined, $3.str);
+ }
+ | object_spec CHOP
+ {
+ $$ = $1;
+ // line chop chop means line chop 0 chop 0
+ if ($$->flags & IS_DEFAULT_CHOPPED) {
+ $$->flags |= IS_CHOPPED;
+ $$->flags &= ~IS_DEFAULT_CHOPPED;
+ $$->start_chop = $$->end_chop = 0.0;
+ }
+ else if ($$->flags & IS_CHOPPED) {
+ $$->end_chop = 0.0;
+ }
+ else {
+ $$->flags |= IS_DEFAULT_CHOPPED;
+ }
+ }
+ | object_spec CHOP expr
+ {
+ $$ = $1;
+ if ($$->flags & IS_DEFAULT_CHOPPED) {
+ $$->flags |= IS_CHOPPED;
+ $$->flags &= ~IS_DEFAULT_CHOPPED;
+ $$->start_chop = 0.0;
+ $$->end_chop = $3;
+ }
+ else if ($$->flags & IS_CHOPPED) {
+ $$->end_chop = $3;
+ }
+ else {
+ $$->start_chop = $$->end_chop = $3;
+ $$->flags |= IS_CHOPPED;
+ }
+ }
+ | object_spec SAME
+ {
+ $$ = $1;
+ $$->flags |= IS_SAME;
+ }
+ | object_spec INVISIBLE
+ {
+ $$ = $1;
+ $$->flags |= IS_INVISIBLE;
+ }
+ | object_spec LEFT_ARROW_HEAD
+ {
+ $$ = $1;
+ $$->flags |= HAS_LEFT_ARROW_HEAD;
+ }
+ | object_spec RIGHT_ARROW_HEAD
+ {
+ $$ = $1;
+ $$->flags |= HAS_RIGHT_ARROW_HEAD;
+ }
+ | object_spec DOUBLE_ARROW_HEAD
+ {
+ $$ = $1;
+ $$->flags |= (HAS_LEFT_ARROW_HEAD|HAS_RIGHT_ARROW_HEAD);
+ }
+ | object_spec CW
+ {
+ $$ = $1;
+ $$->flags |= IS_CLOCKWISE;
+ }
+ | object_spec CCW
+ {
+ $$ = $1;
+ $$->flags &= ~IS_CLOCKWISE;
+ }
+ | object_spec text %prec TEXT
+ {
+ $$ = $1;
+ text_item **p;
+ for (p = & $$->text; *p; p = &(*p)->next)
+ ;
+ *p = new text_item($2.str, $2.filename, $2.lineno);
+ }
+ | object_spec LJUST
+ {
+ $$ = $1;
+ if ($$->text) {
+ text_item *p;
+ for (p = $$->text; p->next; p = p->next)
+ ;
+ p->adj.h = LEFT_ADJUST;
+ }
+ }
+ | object_spec RJUST
+ {
+ $$ = $1;
+ if ($$->text) {
+ text_item *p;
+ for (p = $$->text; p->next; p = p->next)
+ ;
+ p->adj.h = RIGHT_ADJUST;
+ }
+ }
+ | object_spec ABOVE
+ {
+ $$ = $1;
+ if ($$->text) {
+ text_item *p;
+ for (p = $$->text; p->next; p = p->next)
+ ;
+ p->adj.v = ABOVE_ADJUST;
+ }
+ }
+ | object_spec BELOW
+ {
+ $$ = $1;
+ if ($$->text) {
+ text_item *p;
+ for (p = $$->text; p->next; p = p->next)
+ ;
+ p->adj.v = BELOW_ADJUST;
+ }
+ }
+ | object_spec THICKNESS expr
+ {
+ $$ = $1;
+ $$->flags |= HAS_THICKNESS;
+ $$->thickness = $3;
+ }
+ | object_spec ALIGNED
+ {
+ $$ = $1;
+ $$->flags |= IS_ALIGNED;
+ }
+ ;
+
+text:
+ TEXT
+ { $$ = $1; }
+ | SPRINTF '(' TEXT sprintf_args ')'
+ {
+ $$.filename = $3.filename;
+ $$.lineno = $3.lineno;
+ $$.str = do_sprintf($3.str, $4.v, $4.nv);
+ a_delete $4.v;
+ a_delete $3.str;
+ }
+ ;
+
+sprintf_args:
+ /* empty */
+ {
+ $$.v = 0;
+ $$.nv = 0;
+ $$.maxv = 0;
+ }
+ | sprintf_args ',' expr
+ {
+ $$ = $1;
+ if ($$.nv >= $$.maxv) {
+ if ($$.nv == 0) {
+ $$.v = new double[4];
+ $$.maxv = 4;
+ }
+ else {
+ double *oldv = $$.v;
+ $$.maxv *= 2;
+ $$.v = new double[$$.maxv];
+ memcpy($$.v, oldv, $$.nv*sizeof(double));
+ a_delete oldv;
+ }
+ }
+ $$.v[$$.nv] = $3;
+ $$.nv += 1;
+ }
+ ;
+
+position:
+ position_not_place
+ { $$ = $1; }
+ | place
+ {
+ position pos = $1;
+ $$.x = pos.x;
+ $$.y = pos.y;
+ }
+ ;
+
+position_not_place:
+ expr_pair
+ { $$ = $1; }
+ | position '+' expr_pair
+ {
+ $$.x = $1.x + $3.x;
+ $$.y = $1.y + $3.y;
+ }
+ | position '-' expr_pair
+ {
+ $$.x = $1.x - $3.x;
+ $$.y = $1.y - $3.y;
+ }
+ | '(' position ',' position ')'
+ {
+ $$.x = $2.x;
+ $$.y = $4.y;
+ }
+ | expr between position AND position
+ {
+ $$.x = (1.0 - $1)*$3.x + $1*$5.x;
+ $$.y = (1.0 - $1)*$3.y + $1*$5.y;
+ }
+ | expr '<' position ',' position '>'
+ {
+ $$.x = (1.0 - $1)*$3.x + $1*$5.x;
+ $$.y = (1.0 - $1)*$3.y + $1*$5.y;
+ }
+ ;
+
+between:
+ BETWEEN
+ | OF THE WAY BETWEEN
+ ;
+
+expr_pair:
+ expr ',' expr
+ {
+ $$.x = $1;
+ $$.y = $3;
+ }
+ | '(' expr_pair ')'
+ { $$ = $2; }
+ ;
+
+place:
+ /* line at A left == line (at A) left */
+ label %prec CHOP
+ { $$ = $1; }
+ | label corner
+ {
+ path pth($2);
+ if (!pth.follow($1, & $$))
+ YYABORT;
+ }
+ | corner label
+ {
+ path pth($1);
+ if (!pth.follow($2, & $$))
+ YYABORT;
+ }
+ | corner OF label
+ {
+ path pth($1);
+ if (!pth.follow($3, & $$))
+ YYABORT;
+ }
+ | HERE
+ {
+ $$.x = current_position.x;
+ $$.y = current_position.y;
+ $$.obj = 0;
+ }
+ ;
+
+label:
+ LABEL
+ {
+ place *p = lookup_label($1);
+ if (!p) {
+ lex_error("there is no place `%1'", $1);
+ YYABORT;
+ }
+ $$ = *p;
+ a_delete $1;
+ }
+ | nth_primitive
+ { $$.obj = $1; }
+ | label '.' LABEL
+ {
+ path pth($3);
+ if (!pth.follow($1, & $$))
+ YYABORT;
+ }
+ ;
+
+ordinal:
+ ORDINAL
+ { $$ = $1; }
+ | '`' any_expr TH
+ {
+ // XXX Check for overflow (and non-integers?).
+ $$ = (int)$2;
+ }
+ ;
+
+optional_ordinal_last:
+ LAST
+ { $$ = 1; }
+ | ordinal LAST
+ { $$ = $1; }
+ ;
+
+nth_primitive:
+ ordinal object_type
+ {
+ int count = 0;
+ object *p;
+ for (p = olist.head; p != 0; p = p->next)
+ if (p->type() == $2 && ++count == $1) {
+ $$ = p;
+ break;
+ }
+ if (p == 0) {
+ lex_error("there is no %1%2 %3", $1, ordinal_postfix($1),
+ object_type_name($2));
+ YYABORT;
+ }
+ }
+ | optional_ordinal_last object_type
+ {
+ int count = 0;
+ object *p;
+ for (p = olist.tail; p != 0; p = p->prev)
+ if (p->type() == $2 && ++count == $1) {
+ $$ = p;
+ break;
+ }
+ if (p == 0) {
+ lex_error("there is no %1%2 last %3", $1,
+ ordinal_postfix($1), object_type_name($2));
+ YYABORT;
+ }
+ }
+ ;
+
+object_type:
+ BOX
+ { $$ = BOX_OBJECT; }
+ | CIRCLE
+ { $$ = CIRCLE_OBJECT; }
+ | ELLIPSE
+ { $$ = ELLIPSE_OBJECT; }
+ | ARC
+ { $$ = ARC_OBJECT; }
+ | LINE
+ { $$ = LINE_OBJECT; }
+ | ARROW
+ { $$ = ARROW_OBJECT; }
+ | SPLINE
+ { $$ = SPLINE_OBJECT; }
+ | '[' ']'
+ { $$ = BLOCK_OBJECT; }
+ | TEXT
+ { $$ = TEXT_OBJECT; }
+ ;
+
+label_path:
+ '.' LABEL
+ { $$ = new path($2); }
+ | label_path '.' LABEL
+ {
+ $$ = $1;
+ $$->append($3);
+ }
+ ;
+
+relative_path:
+ corner %prec CHOP
+ { $$ = new path($1); }
+ /* give this a lower precedence than LEFT and RIGHT so that
+ [A: box] with .A left == [A: box] with (.A left) */
+ | label_path %prec TEXT
+ { $$ = $1; }
+ | label_path corner
+ {
+ $$ = $1;
+ $$->append($2);
+ }
+ ;
+
+path:
+ relative_path
+ { $$ = $1; }
+ | '(' relative_path ',' relative_path ')'
+ {
+ $$ = $2;
+ $$->set_ypath($4);
+ }
+ /* The rest of these rules are a compatibility sop. */
+ | ORDINAL LAST object_type relative_path
+ {
+ lex_warning("`%1%2 last %3' in `with' argument ignored",
+ $1, ordinal_postfix($1), object_type_name($3));
+ $$ = $4;
+ }
+ | LAST object_type relative_path
+ {
+ lex_warning("`last %1' in `with' argument ignored",
+ object_type_name($2));
+ $$ = $3;
+ }
+ | ORDINAL object_type relative_path
+ {
+ lex_warning("`%1%2 %3' in `with' argument ignored",
+ $1, ordinal_postfix($1), object_type_name($2));
+ $$ = $3;
+ }
+ | LABEL relative_path
+ {
+ lex_warning("initial `%1' in `with' argument ignored", $1);
+ a_delete $1;
+ $$ = $2;
+ }
+ ;
+
+corner:
+ DOT_N
+ { $$ = &object::north; }
+ | DOT_E
+ { $$ = &object::east; }
+ | DOT_W
+ { $$ = &object::west; }
+ | DOT_S
+ { $$ = &object::south; }
+ | DOT_NE
+ { $$ = &object::north_east; }
+ | DOT_SE
+ { $$ = &object:: south_east; }
+ | DOT_NW
+ { $$ = &object::north_west; }
+ | DOT_SW
+ { $$ = &object::south_west; }
+ | DOT_C
+ { $$ = &object::center; }
+ | DOT_START
+ { $$ = &object::start; }
+ | DOT_END
+ { $$ = &object::end; }
+ | TOP
+ { $$ = &object::north; }
+ | BOTTOM
+ { $$ = &object::south; }
+ | LEFT
+ { $$ = &object::west; }
+ | RIGHT
+ { $$ = &object::east; }
+ | UPPER LEFT
+ { $$ = &object::north_west; }
+ | LOWER LEFT
+ { $$ = &object::south_west; }
+ | UPPER RIGHT
+ { $$ = &object::north_east; }
+ | LOWER RIGHT
+ { $$ = &object::south_east; }
+ | LEFT_CORNER
+ { $$ = &object::west; }
+ | RIGHT_CORNER
+ { $$ = &object::east; }
+ | UPPER LEFT_CORNER
+ { $$ = &object::north_west; }
+ | LOWER LEFT_CORNER
+ { $$ = &object::south_west; }
+ | UPPER RIGHT_CORNER
+ { $$ = &object::north_east; }
+ | LOWER RIGHT_CORNER
+ { $$ = &object::south_east; }
+ | NORTH
+ { $$ = &object::north; }
+ | SOUTH
+ { $$ = &object::south; }
+ | EAST
+ { $$ = &object::east; }
+ | WEST
+ { $$ = &object::west; }
+ | CENTER
+ { $$ = &object::center; }
+ | START
+ { $$ = &object::start; }
+ | END
+ { $$ = &object::end; }
+ ;
+
+expr:
+ VARIABLE
+ {
+ if (!lookup_variable($1, & $$)) {
+ lex_error("there is no variable `%1'", $1);
+ YYABORT;
+ }
+ a_delete $1;
+ }
+ | NUMBER
+ { $$ = $1; }
+ | place DOT_X
+ {
+ if ($1.obj != 0)
+ $$ = $1.obj->origin().x;
+ else
+ $$ = $1.x;
+ }
+ | place DOT_Y
+ {
+ if ($1.obj != 0)
+ $$ = $1.obj->origin().y;
+ else
+ $$ = $1.y;
+ }
+ | place DOT_HT
+ {
+ if ($1.obj != 0)
+ $$ = $1.obj->height();
+ else
+ $$ = 0.0;
+ }
+ | place DOT_WID
+ {
+ if ($1.obj != 0)
+ $$ = $1.obj->width();
+ else
+ $$ = 0.0;
+ }
+ | place DOT_RAD
+ {
+ if ($1.obj != 0)
+ $$ = $1.obj->radius();
+ else
+ $$ = 0.0;
+ }
+ | expr '+' expr
+ { $$ = $1 + $3; }
+ | expr '-' expr
+ { $$ = $1 - $3; }
+ | expr '*' expr
+ { $$ = $1 * $3; }
+ | expr '/' expr
+ {
+ if ($3 == 0.0) {
+ lex_error("division by zero");
+ YYABORT;
+ }
+ $$ = $1/$3;
+ }
+ | expr '%' expr
+ {
+ if ($3 == 0.0) {
+ lex_error("modulus by zero");
+ YYABORT;
+ }
+ $$ = fmod($1, $3);
+ }
+ | expr '^' expr
+ {
+ errno = 0;
+ $$ = pow($1, $3);
+ if (errno == EDOM) {
+ lex_error("arguments to `^' operator out of domain");
+ YYABORT;
+ }
+ if (errno == ERANGE) {
+ lex_error("result of `^' operator out of range");
+ YYABORT;
+ }
+ }
+ | '-' expr %prec '!'
+ { $$ = -$2; }
+ | '(' any_expr ')'
+ { $$ = $2; }
+ | SIN '(' any_expr ')'
+ {
+ errno = 0;
+ $$ = sin($3);
+ if (errno == ERANGE) {
+ lex_error("sin result out of range");
+ YYABORT;
+ }
+ }
+ | COS '(' any_expr ')'
+ {
+ errno = 0;
+ $$ = cos($3);
+ if (errno == ERANGE) {
+ lex_error("cos result out of range");
+ YYABORT;
+ }
+ }
+ | ATAN2 '(' any_expr ',' any_expr ')'
+ {
+ errno = 0;
+ $$ = atan2($3, $5);
+ if (errno == EDOM) {
+ lex_error("atan2 argument out of domain");
+ YYABORT;
+ }
+ if (errno == ERANGE) {
+ lex_error("atan2 result out of range");
+ YYABORT;
+ }
+ }
+ | LOG '(' any_expr ')'
+ {
+ errno = 0;
+ $$ = log10($3);
+ if (errno == ERANGE) {
+ lex_error("log result out of range");
+ YYABORT;
+ }
+ }
+ | EXP '(' any_expr ')'
+ {
+ errno = 0;
+ $$ = pow(10.0, $3);
+ if (errno == ERANGE) {
+ lex_error("exp result out of range");
+ YYABORT;
+ }
+ }
+ | SQRT '(' any_expr ')'
+ {
+ errno = 0;
+ $$ = sqrt($3);
+ if (errno == EDOM) {
+ lex_error("sqrt argument out of domain");
+ YYABORT;
+ }
+ }
+ | K_MAX '(' any_expr ',' any_expr ')'
+ { $$ = $3 > $5 ? $3 : $5; }
+ | K_MIN '(' any_expr ',' any_expr ')'
+ { $$ = $3 < $5 ? $3 : $5; }
+ | INT '(' any_expr ')'
+ { $$ = floor($3); }
+ | RAND '(' any_expr ')'
+ { $$ = 1.0 + floor(((rand()&0x7fff)/double(0x7fff))*$3); }
+ | RAND '(' ')'
+ {
+ /* return a random number in the range >=0, <1 */
+ /* portable, but not very random */
+ $$ = (rand() & 0x7fff) / double(0x8000);
+ }
+ | SRAND '(' any_expr ')'
+ {
+ $$ = 0;
+ srand((unsigned int)$3);
+ }
+ | expr '<' expr
+ { $$ = ($1 < $3); }
+ | expr LESSEQUAL expr
+ { $$ = ($1 <= $3); }
+ | expr '>' expr
+ { $$ = ($1 > $3); }
+ | expr GREATEREQUAL expr
+ { $$ = ($1 >= $3); }
+ | expr EQUALEQUAL expr
+ { $$ = ($1 == $3); }
+ | expr NOTEQUAL expr
+ { $$ = ($1 != $3); }
+ | expr ANDAND expr
+ { $$ = ($1 != 0.0 && $3 != 0.0); }
+ | expr OROR expr
+ { $$ = ($1 != 0.0 || $3 != 0.0); }
+ | '!' expr
+ { $$ = ($2 == 0.0); }
+
+ ;
+]])
+
+# Pass plenty of options, to exercise plenty of code, even if we
+# don't actually check the output. But SEGV is watching us, and
+# so might do dmalloc.
+AT_CHECK([[bison --verbose --defines input.y]], 0, [], [])
+
+AT_CLEANUP
projects / bison.git / blobdiff