* src/parse-gram.y: Associate a human readable string to each

[bison.git] / tests / regression.at

diff --git a/tests/regression.at b/tests/regression.at
index 70e3420bf08ea4b2e40c93b9afa3511e161c8e4d..5895fd06f708209810b2c87a1c74e6ff52b56289 100644 (file)
--- a/tests/regression.at
+++ b/tests/regression.at
@@ -1,5 +1,5 @@
 # Bison Regressions.                               -*- Autotest -*-
 # Bison Regressions.                               -*- Autotest -*-

-# Copyright 2001 Free Software Foundation, Inc.
+# Copyright (C) 2001, 2002 Free Software Foundation, Inc.

 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by


@@ -18,247 +18,102 @@
 
 AT_BANNER([[Regression tests.]])
 
 
 AT_BANNER([[Regression tests.]])
 

-## ------------------ ##
-## Duplicate string.  ##
-## ------------------ ##

 
 

+## ------------------------- ##
+## Early token definitions.  ##
+## ------------------------- ##

 
 

-AT_SETUP([Duplicate string])

 
 

-AT_DATA([duplicate.y],
-[[/* `Bison -v' used to dump core when two tokens are defined with the same
-   string, as LE and GE below. */
+AT_SETUP([Early token definitions])

 
 

-%token NUM
-%token LE "<="
-%token GE "<="
+# Found in GCJ: they expect the tokens to be defined before the user
+# prologue, so that they can use the token definitions in it.
+
+AT_DATA([input.y],
+[[%{
+void yyerror (const char *s);
+int yylex (void);
+%}

 
 

+%union
+{
+  int val;
+};
+%{
+#ifndef MY_TOKEN
+# error "MY_TOKEN not defined."
+#endif
+%}
+%token MY_TOKEN

 %%
 %%

-exp: '(' exp ')' | NUM ;
+exp: MY_TOKEN;

 %%
 ]])
 
 %%
 ]])
 

-AT_CHECK([bison -v duplicate.y -o duplicate.c], 0, ignore, ignore)
+AT_CHECK([bison input.y -o input.c])
+AT_COMPILE([input.o], [-c input.c])

 
 AT_CLEANUP
 
 
 
 AT_CLEANUP
 
 

-## ------------------------- ##
-## Unresolved SR Conflicts.  ##
-## ------------------------- ##
-
-AT_SETUP([Unresolved SR Conflicts])
-
-AT_DATA([input.y],
-[[%token NUM OP
-%%
-exp: exp OP exp | NUM;
-]])
-
-AT_CHECK([bison input.y -o input.c -v], 0, [],
-[input.y contains 1 shift/reduce conflict.
-])
-
-# Check the contents of the report.
-AT_CHECK([cat input.output], [],
-[[State 4 contains 1 shift/reduce conflict.
-
-
-Grammar
-
-  Number, Line, Rule
-    1   3 exp -> exp OP exp
-    2   3 exp -> NUM
-
-
-Terminals, with rules where they appear
-
-$ (-1)
-error (256)
-NUM (257) 2
-OP (258) 1
-
-
-Nonterminals, with rules where they appear
-
-exp (5)
-    on left: 1 2, on right: 1
-
-
-state 0
-
-    NUM        shift, and go to state 1
-
-    exp        go to state 2
-
-
-
-state 1
-
-    exp  ->  NUM .   (rule 2)
-
-    $default   reduce using rule 2 (exp)
-
-
-
-state 2
-
-    exp  ->  exp . OP exp   (rule 1)
-
-    $          go to state 5
-    OP         shift, and go to state 3
-
-
-
-state 3
-
-    exp  ->  exp OP . exp   (rule 1)
-
-    NUM        shift, and go to state 1
-
-    exp        go to state 4
-
-
-
-state 4
-
-    exp  ->  exp . OP exp   (rule 1)
-    exp  ->  exp OP exp .   (rule 1)
-
-    OP         shift, and go to state 3
-
-    OP         [reduce using rule 1 (exp)]
-    $default   reduce using rule 1 (exp)
-
-
-
-state 5
-
-    $          go to state 6
-
-
-
-state 6
-
-    $default   accept
-
-
-]])
-
-AT_CLEANUP

 
 

+## ---------------- ##
+## Braces parsing.  ##
+## ---------------- ##

 
 

-## --------------------- ##
-## Solved SR Conflicts.  ##
-## --------------------- ##

 
 

-AT_SETUP([Solved SR Conflicts])
+AT_SETUP([Braces parsing])

 
 AT_DATA([input.y],
 
 AT_DATA([input.y],

-[[%token NUM OP
-%right OP
+[[/* Bison used to swallow the character after `}'. */
+
+%%
+exp: { tests = {{{{{{{{{{}}}}}}}}}}; };

 %%
 %%

-exp: exp OP exp | NUM;

 ]])
 
 ]])
 

-AT_CHECK([bison input.y -o input.c -v], 0, [], [])
-
-# Check the contents of the report.
-AT_CHECK([cat input.output], [],
-[[Conflict in state 4 between rule 1 and token OP resolved as shift.
-
-
-Grammar
-
-  Number, Line, Rule
-    1   4 exp -> exp OP exp
-    2   4 exp -> NUM
-
-
-Terminals, with rules where they appear
-
-$ (-1)
-error (256)
-NUM (257) 2
-OP (258) 1
-
-
-Nonterminals, with rules where they appear
-
-exp (5)
-    on left: 1 2, on right: 1
-
-
-state 0
-
-    NUM        shift, and go to state 1
-
-    exp        go to state 2
-
-
-
-state 1
-
-    exp  ->  NUM .   (rule 2)
-
-    $default   reduce using rule 2 (exp)
-
-
-
-state 2
-
-    exp  ->  exp . OP exp   (rule 1)
-
-    $          go to state 5
-    OP         shift, and go to state 3
-
+AT_CHECK([bison -v input.y -o input.c])

 
 

+AT_CHECK([fgrep 'tests = {{{{{{{{{{}}}}}}}}}};' input.c], 0, [ignore])

 
 

-state 3
-
-    exp  ->  exp OP . exp   (rule 1)
-
-    NUM        shift, and go to state 1
-
-    exp        go to state 4
-
-
-
-state 4
-
-    exp  ->  exp . OP exp   (rule 1)
-    exp  ->  exp OP exp .   (rule 1)
-
-    OP         shift, and go to state 3
-
-    $default   reduce using rule 1 (exp)
-
+AT_CLEANUP

 
 
 
 

-state 5
-
-    $          go to state 6
+## ------------------ ##
+## Duplicate string.  ##
+## ------------------ ##

 
 
 
 

+AT_SETUP([Duplicate string])

 
 

-state 6
+AT_DATA([input.y],
+[[/* `Bison -v' used to dump core when two tokens are defined with the same
+   string, as LE and GE below. */

 
 

-    $default   accept
+%token NUM
+%token LE "<="
+%token GE "<="

 
 

+%%
+exp: '(' exp ')' | NUM ;
+%%
+]])

 
 

+AT_CHECK([bison -v input.y -o input.c], 0, [],
+[[input.y:6.8-14: warning: symbol `"<="' used more than once as a literal string

 ]])
 
 AT_CLEANUP
 
 
 ]])
 
 AT_CLEANUP
 
 

-
-

 ## ------------------- ##
 ## Rule Line Numbers.  ##
 ## ------------------- ##
 
 AT_SETUP([Rule Line Numbers])
 
 ## ------------------- ##
 ## Rule Line Numbers.  ##
 ## ------------------- ##
 
 AT_SETUP([Rule Line Numbers])
 

+AT_KEYWORDS([report])
+

 AT_DATA([input.y],
 [[%%
 expr:
 AT_DATA([input.y],
 [[%%
 expr:


@@ -286,25 +141,29 @@ expr:
 
 {
 
 
 {
 

-}
+};

 ]])
 
 ]])
 

-AT_CHECK([bison input.y -o input.c -v], 0, [], [])
+AT_CHECK([bison input.y -o input.c -v])

 
 # Check the contents of the report.
 AT_CHECK([cat input.output], [],
 [[Grammar
 
 
 # Check the contents of the report.
 AT_CHECK([cat input.output], [],
 [[Grammar
 

-  Number, Line, Rule
-    1   2 @1 -> /* empty */
-    2   2 expr -> 'a' @1 'b'
-    3  15 @2 -> /* empty */
-    4  15 expr -> @2 'c'
+    0 $accept: expr $end
+
+    1 @1: /* empty */
+
+    2 expr: 'a' @1 'b'
+
+    3 @2: /* empty */
+
+    4 expr: @2 'c'

 
 
 Terminals, with rules where they appear
 
 
 
 Terminals, with rules where they appear
 

-$ (-1)
+$end (0) 0

 'a' (97) 2
 'b' (98) 2
 'c' (99) 4
 'a' (97) 2
 'b' (98) 2
 'c' (99) 4


@@ -313,376 +172,464 @@ error (256)
 
 Nonterminals, with rules where they appear
 
 
 Nonterminals, with rules where they appear
 

-expr (6)
-    on left: 2 4
-@1 (7)
+$accept (6)
+    on left: 0
+expr (7)
+    on left: 2 4, on right: 0
+@1 (8)

     on left: 1, on right: 2
     on left: 1, on right: 2

-@2 (8)
+@2 (9)

     on left: 3, on right: 4
 
 
 state 0
 
     on left: 3, on right: 4
 
 
 state 0
 

-    'a'        shift, and go to state 1
+    0 $accept: . expr $end

 
 

-    $default   reduce using rule 3 (@2)
+    'a'  shift, and go to state 1

 
 

-    expr       go to state 6
-    @2         go to state 2
+    $default  reduce using rule 3 (@2)

 
 

+    expr  go to state 2
+    @2    go to state 3

 
 
 state 1
 
 
 
 state 1
 

-    expr  ->  'a' . @1 'b'   (rule 2)
-
-    $default   reduce using rule 1 (@1)
+    2 expr: 'a' . @1 'b'

 
 

-    @1         go to state 3
+    $default  reduce using rule 1 (@1)

 
 

+    @1  go to state 4

 
 
 state 2
 
 
 
 state 2
 

-    expr  ->  @2 . 'c'   (rule 4)
-
-    'c'        shift, and go to state 4
+    0 $accept: expr . $end

 
 

+    $end  shift, and go to state 5

 
 
 state 3
 
 
 
 state 3
 

-    expr  ->  'a' @1 . 'b'   (rule 2)
-
-    'b'        shift, and go to state 5
+    4 expr: @2 . 'c'

 
 

+    'c'  shift, and go to state 6

 
 
 state 4
 
 
 
 state 4
 

-    expr  ->  @2 'c' .   (rule 4)
-
-    $default   reduce using rule 4 (expr)
+    2 expr: 'a' @1 . 'b'

 
 

+    'b'  shift, and go to state 7

 
 
 state 5
 
 
 
 state 5
 

-    expr  ->  'a' @1 'b' .   (rule 2)
-
-    $default   reduce using rule 2 (expr)
+    0 $accept: expr $end .

 
 

+    $default  accept

 
 
 state 6
 
 
 
 state 6
 

-    $          go to state 7
+    4 expr: @2 'c' .

 
 

+    $default  reduce using rule 4 (expr)

 
 
 state 7
 
 
 
 state 7
 

-    $          go to state 8
-
-
-
-state 8
-
-    $default   accept
-
+    2 expr: 'a' @1 'b' .

 
 

+    $default  reduce using rule 2 (expr)

 ]])
 
 AT_CLEANUP
 
 
 
 ]])
 
 AT_CLEANUP
 
 
 

-## -------------------- ##
-## %expect not enough.  ##
-## -------------------- ##
+## ---------------------- ##
+## Mixing %token styles.  ##
+## ---------------------- ##
+

 
 

-AT_SETUP([%expect not enough])
+AT_SETUP([Mixing %token styles])

 
 

+# Taken from the documentation.

 AT_DATA([input.y],
 AT_DATA([input.y],

-[[%token NUM OP
-%expect 0
+[[%token  <operator>  OR      "||"
+%token  <operator>  LE 134  "<="
+%left  OR  "<="
+%%
+exp: ;

 %%
 %%

-exp: exp OP exp | NUM;

 ]])
 
 ]])
 

-AT_CHECK([bison input.y -o input.c], 1, [],
-[input.y contains 1 shift/reduce conflict.
-expected 0 shift/reduce conflicts
-])
+AT_CHECK([bison -v input.y -o input.c])
+

 AT_CLEANUP
 
 
 AT_CLEANUP
 
 

-## --------------- ##
-## %expect right.  ##
-## --------------- ##

 
 

-AT_SETUP([%expect right])
+## ---------------- ##
+## Invalid inputs.  ##
+## ---------------- ##
+
+
+AT_SETUP([Invalid inputs])

 
 AT_DATA([input.y],
 
 AT_DATA([input.y],

-[[%token NUM OP
-%expect 1
-%%
-exp: exp OP exp | NUM;
+[[%%
+?
+default: 'a' }
+%&
+%a
+%-
+%{
+]])
+
+AT_CHECK([bison input.y], [1], [],
+[[input.y:2.1: invalid character: `?'
+input.y:3.14: invalid character: `}'
+input.y:4.1: invalid character: `%'
+input.y:4.2: invalid character: `&'
+input.y:5.1: invalid character: `%'
+input.y:6.1: invalid character: `%'
+input.y:6.2: invalid character: `-'
+input.y:7.1-8.0: unexpected end of file in a prologue
+input.y:7.1-8.0: parse error, unexpected "%{...}%", expecting ";" or "|"

 ]])
 
 ]])
 

-AT_CHECK([bison input.y -o input.c], 0)

 AT_CLEANUP
 
 
 AT_CLEANUP
 
 

-## ------------------ ##
-## %expect too much.  ##
-## ------------------ ##

 
 

-AT_SETUP([%expect too much])
+## ------------------- ##
+## Token definitions.  ##
+## ------------------- ##
+

 
 

+AT_SETUP([Token definitions])
+
+# Bison managed, when fed with `%token 'f' "f"' to #define 'f'!

 AT_DATA([input.y],
 AT_DATA([input.y],

-[[%token NUM OP
-%expect 2
+[%{
+void yyerror (const char *s);
+int yylex (void);
+%}
+[%token YYEOF 0 "end of file"
+%token 'a' "a"
+%token b "b"
+%token c 'c'
+%token 'd' d

 %%
 %%

-exp: exp OP exp | NUM;
+exp: "a";

 ]])
 
 ]])
 

-AT_CHECK([bison input.y -o input.c], 1, [],
-[input.y contains 1 shift/reduce conflict.
-expected 2 shift/reduce conflicts
-])
+AT_CHECK([bison input.y -o input.c])
+AT_COMPILE([input.o], [-c input.c])

 AT_CLEANUP
 
 
 AT_CLEANUP
 
 

-## ---------------------- ##
-## Mixing %token styles.  ##
-## ---------------------- ##

 
 

+## -------------- ##
+## Web2c Report.  ##
+## -------------- ##

 
 

-AT_SETUP([Mixing %token styles])
+# The generation of the reduction was once wrong in Bison, and made it
+# miss some reductions.  In the following test case, the reduction on
+# `undef_id_tok' in state 1 was missing.  This is stripped down from
+# the actual web2c.y.
+
+AT_SETUP([Web2c Report])
+
+AT_KEYWORDS([report])

 
 

-# Taken from the documentation.

 AT_DATA([input.y],
 AT_DATA([input.y],

-[[%token  <operator>  OR      "||"
-%token  <operator>  LE 134  "<="
-%left  OR  "<="
+[[%token       undef_id_tok const_id_tok
+
+%start CONST_DEC_PART
+\f

 %%
 %%

-exp: ;
+CONST_DEC_PART:
+         CONST_DEC_LIST
+        ;
+
+CONST_DEC_LIST:
+         CONST_DEC
+        | CONST_DEC_LIST CONST_DEC
+        ;
+
+CONST_DEC:
+         { } undef_id_tok '=' const_id_tok ';'
+        ;

 %%
 ]])
 
 %%
 ]])
 

-AT_CHECK([bison -v input.y -o input.c], 0, ignore, ignore)
+AT_CHECK([bison -v input.y])
+AT_CHECK([cat input.output], 0,
+[[Grammar

 
 

-AT_CLEANUP
+    0 $accept: CONST_DEC_PART $end

 
 

+    1 CONST_DEC_PART: CONST_DEC_LIST

 
 

+    2 CONST_DEC_LIST: CONST_DEC
+    3               | CONST_DEC_LIST CONST_DEC

 
 

-## ---------------------- ##
-## %union and --defines.  ##
-## ---------------------- ##
+    4 @1: /* empty */

 
 

+    5 CONST_DEC: @1 undef_id_tok '=' const_id_tok ';'

 
 

-AT_SETUP([%union and --defines])

 
 

-AT_DATA([union.y],
-[%union
-{
-  int   integer;
-  char *string ;
-}
-%%
-exp: {};
-])
+Terminals, with rules where they appear

 
 

-AT_CHECK([bison --defines union.y])
+$end (0) 0
+';' (59) 5
+'=' (61) 5
+error (256)
+undef_id_tok (258) 5
+const_id_tok (259) 5

 
 

-AT_CLEANUP

 
 

+Nonterminals, with rules where they appear

 
 

-## --------------------------------------- ##
-## Duplicate '/' in C comments in %union   ##
-## --------------------------------------- ##
+$accept (7)
+    on left: 0
+CONST_DEC_PART (8)
+    on left: 1, on right: 0
+CONST_DEC_LIST (9)
+    on left: 2 3, on right: 1 3
+CONST_DEC (10)
+    on left: 5, on right: 2 3
+@1 (11)
+    on left: 4, on right: 5

 
 
 
 

-AT_SETUP([%union and C comments])
+state 0

 
 

-AT_DATA([union-comment.y],
-[%union
-{
-  /* The int.  */      int   integer;
-  /* The string.  */   char *string ;
-}
-%%
-exp: {};
-])
+    0 $accept: . CONST_DEC_PART $end

 
 

-AT_CHECK([bison union-comment.y])
-AT_CHECK([fgrep '//*' union-comment.tab.c], [1], [])
+    $default  reduce using rule 4 (@1)

 
 

-AT_CLEANUP
+    CONST_DEC_PART  go to state 1
+    CONST_DEC_LIST  go to state 2
+    CONST_DEC       go to state 3
+    @1              go to state 4

 
 
 
 

-## ----------------- ##
-## Invalid input 1.  ##
-## ----------------- ##
+state 1

 
 

+    0 $accept: CONST_DEC_PART . $end

 
 

-AT_SETUP([Invalid input: 1])
+    $end  shift, and go to state 5

 
 

-AT_DATA([input.y],
-[[%%
-?
-]])

 
 

-AT_CHECK([bison input.y], [1], [],
-[[input.y:2: invalid input: `?'
-input.y:3: fatal error: no rules in the input grammar
-]])
+state 2

 
 

-AT_CLEANUP
+    1 CONST_DEC_PART: CONST_DEC_LIST .
+    3 CONST_DEC_LIST: CONST_DEC_LIST . CONST_DEC

 
 

+    undef_id_tok  reduce using rule 4 (@1)
+    $default      reduce using rule 1 (CONST_DEC_PART)

 
 

-## ----------------- ##
-## Invalid input 2.  ##
-## ----------------- ##
+    CONST_DEC  go to state 6
+    @1         go to state 4

 
 
 
 

-AT_SETUP([Invalid input: 2])
+state 3

 
 

-AT_DATA([input.y],
-[[%%
-default: 'a' }
-]])
+    2 CONST_DEC_LIST: CONST_DEC .

 
 

-AT_CHECK([bison input.y], [1], [],
-[[input.y:2: invalid input: `}'
-]])
+    $default  reduce using rule 2 (CONST_DEC_LIST)

 
 

-AT_CLEANUP

 
 

+state 4

 
 

+    5 CONST_DEC: @1 . undef_id_tok '=' const_id_tok ';'

 
 

-## -------------------- ##
-## Invalid %directive.  ##
-## -------------------- ##
+    undef_id_tok  shift, and go to state 7

 
 
 
 

-AT_SETUP([Invalid %directive])
+state 5

 
 

-AT_DATA([input.y],
-[[%invalid
-]])
+    0 $accept: CONST_DEC_PART $end .

 
 

-AT_CHECK([bison input.y], [1], [],
-[[input.y:1: unrecognized: %invalid
-input.y:1:    Skipping to next %
-input.y:2: fatal error: no input grammar
-]])
+    $default  accept

 
 

-AT_CLEANUP

 
 

+state 6

 
 

+    3 CONST_DEC_LIST: CONST_DEC_LIST CONST_DEC .

 
 

-## --------------------- ##
-## Invalid CPP headers.  ##
-## --------------------- ##
+    $default  reduce using rule 3 (CONST_DEC_LIST)

 
 

-# AT_TEST_CPP_GUARD_H([INPUT-FILE-BASE)
-# -------------------------------------
-m4_define([AT_TEST_CPP_GUARD_H],
-[AT_SETUP([Invalid CPP guards: $1])

 
 

-# Possibly create inner directories.
-dirname=`AS_DIRNAME([$1])`
-AS_MKDIR_P([$dirname])
+state 7

 
 

-AT_DATA([$1.y],
-[%%
-dummy:
-])
+    5 CONST_DEC: @1 undef_id_tok . '=' const_id_tok ';'

 
 

-AT_CHECK([bison --defines=$1.h $1.y])
+    '='  shift, and go to state 8

 
 

-# CPP should be happy with it.
-AT_CHECK([$CC -E $1.h], 0, [ignore])

 
 

-AT_CLEANUP
-])
+state 8

 
 

-AT_TEST_CPP_GUARD_H([input/input])
-AT_TEST_CPP_GUARD_H([9foo])
+    5 CONST_DEC: @1 undef_id_tok '=' . const_id_tok ';'

 
 

+    const_id_tok  shift, and go to state 9

 
 

-## ---------------- ##
-## Broken Closure.  ##
-## ---------------- ##

 
 

-# TC was once broken during a massive `simplification' of the code.
-# It resulted in bison dumping core on the following grammar (the
-# computation of FIRSTS uses TC).  It managed to produce a pretty
-# exotic closure:
-#
-# TC: Input
-#
-#    01234567
-#   +--------+
-#  0| 1      |
-#  1|  1     |
-#  2|   1    |
-#  3|    1   |
-#  4|     1  |
-#  5|      1 |
-#  6|       1|
-#  7|        |
-#   +--------+
+state 9
+
+    5 CONST_DEC: @1 undef_id_tok '=' const_id_tok . ';'
+
+    ';'  shift, and go to state 10
+
+
+state 10
+
+    5 CONST_DEC: @1 undef_id_tok '=' const_id_tok ';' .
+
+    $default  reduce using rule 5 (CONST_DEC)
+]])
+
+AT_CLEANUP
+
+
+## --------------- ##
+## Web2c Actions.  ##
+## --------------- ##
+
+# The generation of the mapping `state -> action' was once wrong in
+# extremely specific situations.  web2c.y exhibits this situation.
+# Below is a stripped version of the grammar.  It looks like one can
+# simplify it further, but just don't: it is tuned to exhibit a bug,
+# which disapears when applying sane grammar transformations.

 #
 #

-# TC: Output
+# It used to be wrong on yydefact only:

 #
 #

-#    01234567
-#   +--------+
-#  0| 1      |
-#  1| 111    |
-#  2| 111    |
-#  3| 1111   |
-#  4| 111 1  |
-#  5| 111  1 |
-#  6| 111   1|
-#  7| 111    |
-#   +--------+
+# static const short yydefact[] =
+#  {
+# -       2,     0,     1,     0,     0,     2,     3,     2,     5,     4,
+# +       2,     0,     1,     0,     0,     0,     3,     2,     5,     4,
+#         0,     0
+#  };

 #
 #

-# instead of that below.
+# but let's check all the tables.
+
+
+AT_SETUP([Web2c Actions])

 
 

-AT_SETUP([Broken Closure])
+AT_KEYWORDS([report])

 
 AT_DATA([input.y],
 [[%%
 
 AT_DATA([input.y],
 [[%%

-a: b
-b: c
-c: d
-d: e
-e: f
-f: g
-g: h
-h: 'h'
+statement:  struct_stat;
+struct_stat:  /* empty. */ | if else;
+if: "if" "const" "then" statement;
+else: "else" statement;
+%%

 ]])
 
 ]])
 

-AT_CHECK([bison --trace input.y 2>&1 |
-          sed -n '/^TC: Output BEGIN/,/^TC: Output END/p'],
-         [0],
-[[TC: Output BEGIN
-           @&t@
-   01234567
-  +--------+
- 0| 1111111|
- 1|  111111|
- 2|   11111|
- 3|    1111|
- 4|     111|
- 5|      11|
- 6|       1|
- 7|        |
-  +--------+
-TC: Output END
+AT_CHECK([bison -v input.y -o input.c])
+
+# Check only the tables.  We don't use --no-parser, because it is
+# still to be implemented in the experimental branch of Bison.
+[sed -n 's/  *$//;/^static const.*\[\] =/,/^}/p' input.c >tables.c]
+
+AT_CHECK([[cat tables.c]], 0,
+[[static const unsigned char yytranslate[] =
+{
+       0,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
+       2,     2,     2,     2,     2,     2,     1,     2,     3,     4,
+       5,     6
+};
+static const unsigned char yyprhs[] =
+{
+       0,     0,     3,     5,     6,     9,    14
+};
+static const signed char yyrhs[] =
+{
+       8,     0,    -1,     9,    -1,    -1,    10,    11,    -1,     3,
+       4,     5,     8,    -1,     6,     8,    -1
+};
+static const unsigned char yyrline[] =
+{
+       0,     2,     2,     3,     3,     4,     5
+};
+static const char *const yytname[] =
+{
+  "$end", "error", "$undefined", "\"if\"", "\"const\"", "\"then\"",
+  "\"else\"", "$accept", "statement", "struct_stat", "if", "else", 0
+};
+static const unsigned short yytoknum[] =
+{
+       0,   256,   257,   258,   259,   260,   261
+};
+static const unsigned char yyr1[] =
+{
+       0,     7,     8,     9,     9,    10,    11
+};
+static const unsigned char yyr2[] =
+{
+       0,     2,     1,     0,     2,     4,     2
+};
+static const unsigned char yydefact[] =
+{
+       3,     0,     0,     2,     0,     0,     1,     3,     4,     3,
+       6,     5
+};
+static const signed char yydefgoto[] =
+{
+      -1,     2,     3,     4,     8
+};
+static const signed char yypact[] =
+{
+      -2,    -1,     4,    -8,     0,     2,    -8,    -2,    -8,    -2,
+      -8,    -8
+};
+static const signed char yypgoto[] =
+{
+      -8,    -7,    -8,    -8,    -8
+};
+static const unsigned char yytable[] =
+{
+      10,     1,    11,     5,     6,     0,     7,     9
+};
+static const signed char yycheck[] =
+{
+       7,     3,     9,     4,     0,    -1,     6,     5
+};
+static const unsigned char yystos[] =
+{
+       0,     3,     8,     9,    10,     4,     0,     6,    11,     5,
+       8,     8
+};

 ]])
 
 AT_CLEANUP
 ]])
 
 AT_CLEANUP