Bison News
----------
-* Changes in version ?.? (????-??-??):
+* Changes in version 2.5.1 (????-??-??):
+
+** Some portability problems in the test suite have been fixed.
+
+** Minor improvements have been made to the manual.
+
+* Changes in version 2.5 (2011-05-14):
+
+** Grammar symbol names can now contain non-initial dashes:
+
+ Consistently with directives (such as %error-verbose) and with
+ %define variables (e.g. push-pull), grammar symbol names may contain
+ dashes in any position except the beginning. This is a GNU
+ extension over POSIX Yacc. Thus, use of this extension is reported
+ by -Wyacc and rejected in Yacc mode (--yacc).
+
+** Named references:
+
+ Historically, Yacc and Bison have supported positional references
+ ($n, $$) to allow access to symbol values from inside of semantic
+ actions code.
+
+ Starting from this version, Bison can also accept named references.
+ When no ambiguity is possible, original symbol names may be used
+ as named references:
+
+ if_stmt : "if" cond_expr "then" then_stmt ';'
+ { $if_stmt = mk_if_stmt($cond_expr, $then_stmt); }
+
+ In the more common case, explicit names may be declared:
+
+ stmt[res] : "if" expr[cond] "then" stmt[then] "else" stmt[else] ';'
+ { $res = mk_if_stmt($cond, $then, $else); }
+
+ Location information is also accessible using @name syntax. When
+ accessing symbol names containing dots or dashes, explicit bracketing
+ ($[sym.1]) must be used.
+
+ These features are experimental in this version. More user feedback
+ will help to stabilize them.
+
+** IELR(1) and canonical LR(1):
+
+ IELR(1) is a minimal LR(1) parser table generation algorithm. That
+ is, given any context-free grammar, IELR(1) generates parser tables
+ with the full language-recognition power of canonical LR(1) but with
+ nearly the same number of parser states as LALR(1). This reduction
+ in parser states is often an order of magnitude. More importantly,
+ because canonical LR(1)'s extra parser states may contain duplicate
+ conflicts in the case of non-LR(1) grammars, the number of conflicts
+ for IELR(1) is often an order of magnitude less as well. This can
+ significantly reduce the complexity of developing of a grammar.
+
+ Bison can now generate IELR(1) and canonical LR(1) parser tables in
+ place of its traditional LALR(1) parser tables, which remain the
+ default. You can specify the type of parser tables in the grammar
+ file with these directives:
+
+ %define lr.type lalr
+ %define lr.type ielr
+ %define lr.type canonical-lr
+
+ The default-reduction optimization in the parser tables can also be
+ adjusted using `%define lr.default-reductions'. For details on both
+ of these features, see the new section `Tuning LR' in the Bison
+ manual.
+
+ These features are experimental. More user feedback will help to
+ stabilize them.
+
+** LAC (Lookahead Correction) for syntax error handling:
+
+ Canonical LR, IELR, and LALR can suffer from a couple of problems
+ upon encountering a syntax error. First, the parser might perform
+ additional parser stack reductions before discovering the syntax
+ error. Such reductions can perform user semantic actions that are
+ unexpected because they are based on an invalid token, and they
+ cause error recovery to begin in a different syntactic context than
+ the one in which the invalid token was encountered. Second, when
+ verbose error messages are enabled (with %error-verbose or the
+ obsolete `#define YYERROR_VERBOSE'), the expected token list in the
+ syntax error message can both contain invalid tokens and omit valid
+ tokens.
+
+ The culprits for the above problems are %nonassoc, default
+ reductions in inconsistent states, and parser state merging. Thus,
+ IELR and LALR suffer the most. Canonical LR can suffer only if
+ %nonassoc is used or if default reductions are enabled for
+ inconsistent states.
+
+ LAC is a new mechanism within the parsing algorithm that solves
+ these problems for canonical LR, IELR, and LALR without sacrificing
+ %nonassoc, default reductions, or state merging. When LAC is in
+ use, canonical LR and IELR behave almost exactly the same for both
+ syntactically acceptable and syntactically unacceptable input.
+ While LALR still does not support the full language-recognition
+ power of canonical LR and IELR, LAC at least enables LALR's syntax
+ error handling to correctly reflect LALR's language-recognition
+ power.
+
+ Currently, LAC is only supported for deterministic parsers in C.
+ You can enable LAC with the following directive:
+
+ %define parse.lac full
+
+ See the new section `LAC' in the Bison manual for additional
+ details including a few caveats.
+
+ LAC is an experimental feature. More user feedback will help to
+ stabilize it.
+
+** %define improvements:
+
+*** Can now be invoked via the command line:
+
+ Each of these command-line options
+
+ -D NAME[=VALUE]
+ --define=NAME[=VALUE]
+
+ -F NAME[=VALUE]
+ --force-define=NAME[=VALUE]
+
+ is equivalent to this grammar file declaration
+
+ %define NAME ["VALUE"]
+
+ except that the manner in which Bison processes multiple definitions
+ for the same NAME differs. Most importantly, -F and --force-define
+ quietly override %define, but -D and --define do not. For further
+ details, see the section `Bison Options' in the Bison manual.
+
+*** Variables renamed:
+
+ The following %define variables
+
+ api.push_pull
+ lr.keep_unreachable_states
+
+ have been renamed to
+
+ api.push-pull
+ lr.keep-unreachable-states
+
+ The old names are now deprecated but will be maintained indefinitely
+ for backward compatibility.
+
+*** Values no longer need to be quoted in the grammar file:
+
+ If a %define value is an identifier, it no longer needs to be placed
+ within quotations marks. For example,
+
+ %define api.push-pull "push"
+
+ can be rewritten as
+
+ %define api.push-pull push
+
+*** Unrecognized variables are now errors not warnings.
+
+*** Multiple invocations for any variable is now an error not a warning.
+
+** Unrecognized %code qualifiers are now errors not warnings.
+
+** Character literals not of length one:
+
+ Previously, Bison quietly converted all character literals to length
+ one. For example, without warning, Bison interpreted the operators in
+ the following grammar to be the same token:
+
+ exp: exp '++'
+ | exp '+' exp
+ ;
+
+ Bison now warns when a character literal is not of length one. In
+ some future release, Bison will start reporting an error instead.
+
+** Destructor calls fixed for lookaheads altered in semantic actions:
+
+ Previously for deterministic parsers in C, if a user semantic action
+ altered yychar, the parser in some cases used the old yychar value to
+ determine which destructor to call for the lookahead upon a syntax
+ error or upon parser return. This bug has been fixed.
+
+** C++ parsers use YYRHSLOC:
+
+ Similarly to the C parsers, the C++ parsers now define the YYRHSLOC
+ macro and use it in the default YYLLOC_DEFAULT. You are encouraged
+ to use it. If, for instance, your location structure has `first'
+ and `last' members, instead of
+
+ # define YYLLOC_DEFAULT(Current, Rhs, N) \
+ do \
+ if (N) \
+ { \
+ (Current).first = (Rhs)[1].location.first; \
+ (Current).last = (Rhs)[N].location.last; \
+ } \
+ else \
+ { \
+ (Current).first = (Current).last = (Rhs)[0].location.last; \
+ } \
+ while (false)
+
+ use:
+
+ # define YYLLOC_DEFAULT(Current, Rhs, N) \
+ do \
+ if (N) \
+ { \
+ (Current).first = YYRHSLOC (Rhs, 1).first; \
+ (Current).last = YYRHSLOC (Rhs, N).last; \
+ } \
+ else \
+ { \
+ (Current).first = (Current).last = YYRHSLOC (Rhs, 0).last; \
+ } \
+ while (false)
+
+** YYLLOC_DEFAULT in C++:
+
+ The default implementation of YYLLOC_DEFAULT used to be issued in
+ the header file. It is now output in the implementation file, after
+ the user %code sections so that its #ifndef guard does not try to
+ override the user's YYLLOC_DEFAULT if provided.
+
+** YYFAIL now produces warnings and Java parsers no longer implement it:
+
+ YYFAIL has existed for many years as an undocumented feature of
+ deterministic parsers in C generated by Bison. More recently, it was
+ a documented feature of Bison's experimental Java parsers. As
+ promised in Bison 2.4.2's NEWS entry, any appearance of YYFAIL in a
+ semantic action now produces a deprecation warning, and Java parsers
+ no longer implement YYFAIL at all. For further details, including a
+ discussion of how to suppress C preprocessor warnings about YYFAIL
+ being unused, see the Bison 2.4.2 NEWS entry.
+
+** Temporary hack for adding a semicolon to the user action:
+
+ Previously, Bison appended a semicolon to every user action for
+ reductions when the output language defaulted to C (specifically, when
+ neither %yacc, %language, %skeleton, or equivalent command-line
+ options were specified). This allowed actions such as
+
+ exp: exp "+" exp { $$ = $1 + $3 };
+
+ instead of
+
+ exp: exp "+" exp { $$ = $1 + $3; };
+
+ As a first step in removing this misfeature, Bison now issues a
+ warning when it appends a semicolon. Moreover, in cases where Bison
+ cannot easily determine whether a semicolon is needed (for example, an
+ action ending with a cpp directive or a braced compound initializer),
+ it no longer appends one. Thus, the C compiler might now complain
+ about a missing semicolon where it did not before. Future releases of
+ Bison will cease to append semicolons entirely.
+
+** Verbose syntax error message fixes:
+
+ When %error-verbose or the obsolete `#define YYERROR_VERBOSE' is
+ specified, syntax error messages produced by the generated parser
+ include the unexpected token as well as a list of expected tokens.
+ The effect of %nonassoc on these verbose messages has been corrected
+ in two ways, but a more complete fix requires LAC, described above:
+
+*** When %nonassoc is used, there can exist parser states that accept no
+ tokens, and so the parser does not always require a lookahead token
+ in order to detect a syntax error. Because no unexpected token or
+ expected tokens can then be reported, the verbose syntax error
+ message described above is suppressed, and the parser instead
+ reports the simpler message, `syntax error'. Previously, this
+ suppression was sometimes erroneously triggered by %nonassoc when a
+ lookahead was actually required. Now verbose messages are
+ suppressed only when all previous lookaheads have already been
+ shifted or discarded.
+
+*** Previously, the list of expected tokens erroneously included tokens
+ that would actually induce a syntax error because conflicts for them
+ were resolved with %nonassoc in the current parser state. Such
+ tokens are now properly omitted from the list.
+
+*** Expected token lists are still often wrong due to state merging
+ (from LALR or IELR) and default reductions, which can both add
+ invalid tokens and subtract valid tokens. Canonical LR almost
+ completely fixes this problem by eliminating state merging and
+ default reductions. However, there is one minor problem left even
+ when using canonical LR and even after the fixes above. That is,
+ if the resolution of a conflict with %nonassoc appears in a later
+ parser state than the one at which some syntax error is
+ discovered, the conflicted token is still erroneously included in
+ the expected token list. Bison's new LAC implementation,
+ described above, eliminates this problem and the need for
+ canonical LR. However, LAC is still experimental and is disabled
+ by default.
+
+** Java skeleton fixes:
+
+*** A location handling bug has been fixed.
+
+*** The top element of each of the value stack and location stack is now
+ cleared when popped so that it can be garbage collected.
+
+*** Parser traces now print the top element of the stack.
+
+** -W/--warnings fixes:
+
+*** Bison now properly recognizes the `no-' versions of categories:
+
+ For example, given the following command line, Bison now enables all
+ warnings except warnings for incompatibilities with POSIX Yacc:
+
+ bison -Wall,no-yacc gram.y
+
+*** Bison now treats S/R and R/R conflicts like other warnings:
+
+ Previously, conflict reports were independent of Bison's normal
+ warning system. Now, Bison recognizes the warning categories
+ `conflicts-sr' and `conflicts-rr'. This change has important
+ consequences for the -W and --warnings command-line options. For
+ example:
+
+ bison -Wno-conflicts-sr gram.y # S/R conflicts not reported
+ bison -Wno-conflicts-rr gram.y # R/R conflicts not reported
+ bison -Wnone gram.y # no conflicts are reported
+ bison -Werror gram.y # any conflict is an error
+
+ However, as before, if the %expect or %expect-rr directive is
+ specified, an unexpected number of conflicts is an error, and an
+ expected number of conflicts is not reported, so -W and --warning
+ then have no effect on the conflict report.
+
+*** The `none' category no longer disables a preceding `error':
+
+ For example, for the following command line, Bison now reports
+ errors instead of warnings for incompatibilities with POSIX Yacc:
+
+ bison -Werror,none,yacc gram.y
+
+*** The `none' category now disables all Bison warnings:
+
+ Previously, the `none' category disabled only Bison warnings for
+ which there existed a specific -W/--warning category. However,
+ given the following command line, Bison is now guaranteed to
+ suppress all warnings:
+
+ bison -Wnone gram.y
+
+** Precedence directives can now assign token number 0:
+
+ Since Bison 2.3b, which restored the ability of precedence
+ directives to assign token numbers, doing so for token number 0 has
+ produced an assertion failure. For example:
+
+ %left END 0
+
+ This bug has been fixed.
+
+* Changes in version 2.4.3 (2010-08-05):
+
+** Bison now obeys -Werror and --warnings=error for warnings about
+ grammar rules that are useless in the parser due to conflicts.
+
+** Problems with spawning M4 on at least FreeBSD 8 and FreeBSD 9 have
+ been fixed.
+
+** Failures in the test suite for GCC 4.5 have been fixed.
+
+** Failures in the test suite for some versions of Sun Studio C++ have
+ been fixed.
+
+** Contrary to Bison 2.4.2's NEWS entry, it has been decided that
+ warnings about undefined %prec identifiers will not be converted to
+ errors in Bison 2.5. They will remain warnings, which should be
+ sufficient for POSIX while avoiding backward compatibility issues.
+
+** Minor documentation fixes.
+
+* Changes in version 2.4.2 (2010-03-20):
+
+** Some portability problems that resulted in failures and livelocks
+ in the test suite on some versions of at least Solaris, AIX, HP-UX,
+ RHEL4, and Tru64 have been addressed. As a result, fatal Bison
+ errors should no longer cause M4 to report a broken pipe on the
+ affected platforms.
+
+** `%prec IDENTIFIER' requires IDENTIFIER to be defined separately.
+
+ POSIX specifies that an error be reported for any identifier that does
+ not appear on the LHS of a grammar rule and that is not defined by
+ %token, %left, %right, or %nonassoc. Bison 2.3b and later lost this
+ error report for the case when an identifier appears only after a
+ %prec directive. It is now restored. However, for backward
+ compatibility with recent Bison releases, it is only a warning for
+ now. In Bison 2.5 and later, it will return to being an error.
+ [Between the 2.4.2 and 2.4.3 releases, it was decided that this
+ warning will not be converted to an error in Bison 2.5.]
+
+** Detection of GNU M4 1.4.6 or newer during configure is improved.
+
+** Warnings from gcc's -Wundef option about undefined YYENABLE_NLS,
+ YYLTYPE_IS_TRIVIAL, and __STRICT_ANSI__ in C/C++ parsers are now
+ avoided.
+
+** %code is now a permanent feature.
+
+ A traditional Yacc prologue directive is written in the form:
+
+ %{CODE%}
+
+ To provide a more flexible alternative, Bison 2.3b introduced the
+ %code directive with the following forms for C/C++:
+
+ %code {CODE}
+ %code requires {CODE}
+ %code provides {CODE}
+ %code top {CODE}
+
+ These forms are now considered permanent features of Bison. See the
+ %code entries in the section "Bison Declaration Summary" in the Bison
+ manual for a summary of their functionality. See the section
+ "Prologue Alternatives" for a detailed discussion including the
+ advantages of %code over the traditional Yacc prologue directive.
+
+ Bison's Java feature as a whole including its current usage of %code
+ is still considered experimental.
+
+** YYFAIL is deprecated and will eventually be removed.
+
+ YYFAIL has existed for many years as an undocumented feature of
+ deterministic parsers in C generated by Bison. Previously, it was
+ documented for Bison's experimental Java parsers. YYFAIL is no longer
+ documented for Java parsers and is formally deprecated in both cases.
+ Users are strongly encouraged to migrate to YYERROR, which is
+ specified by POSIX.
+
+ Like YYERROR, you can invoke YYFAIL from a semantic action in order to
+ induce a syntax error. The most obvious difference from YYERROR is
+ that YYFAIL will automatically invoke yyerror to report the syntax
+ error so that you don't have to. However, there are several other
+ subtle differences between YYERROR and YYFAIL, and YYFAIL suffers from
+ inherent flaws when %error-verbose or `#define YYERROR_VERBOSE' is
+ used. For a more detailed discussion, see:
+
+ http://lists.gnu.org/archive/html/bison-patches/2009-12/msg00024.html
+
+ The upcoming Bison 2.5 will remove YYFAIL from Java parsers, but
+ deterministic parsers in C will continue to implement it. However,
+ because YYFAIL is already flawed, it seems futile to try to make new
+ Bison features compatible with it. Thus, during parser generation,
+ Bison 2.5 will produce a warning whenever it discovers YYFAIL in a
+ rule action. In a later release, YYFAIL will be disabled for
+ %error-verbose and `#define YYERROR_VERBOSE'. Eventually, YYFAIL will
+ be removed altogether.
+
+ There exists at least one case where Bison 2.5's YYFAIL warning will
+ be a false positive. Some projects add phony uses of YYFAIL and other
+ Bison-defined macros for the sole purpose of suppressing C
+ preprocessor warnings (from GCC cpp's -Wunused-macros, for example).
+ To avoid Bison's future warning, such YYFAIL uses can be moved to the
+ epilogue (that is, after the second `%%') in the Bison input file. In
+ this release (2.4.2), Bison already generates its own code to suppress
+ C preprocessor warnings for YYFAIL, so projects can remove their own
+ phony uses of YYFAIL if compatibility with Bison releases prior to
+ 2.4.2 is not necessary.
+
+** Internationalization.
+
+ Fix a regression introduced in Bison 2.4: Under some circumstances,
+ message translations were not installed although supported by the
+ host system.
+
+* Changes in version 2.4.1 (2008-12-11):
+
+** In the GLR defines file, unexpanded M4 macros in the yylval and yylloc
+ declarations have been fixed.
** Temporary hack for adding a semicolon to the user action.
exp: exp "+" exp { $$ = $1 + $3; };
- This prevents the future support for languages than do not use `;'
- as C/C++/Java do. Yet some grammars still depend on this `feature'.
- Bison 2.4.1 restores the previous behavior to leave more time for
- grammars depending on the old behavior to be adjusted. Future
- release of Bison will disable this feature.
+ Some grammars still depend on this `feature'. Bison 2.4.1 restores
+ the previous behavior in the case of C output (specifically, when
+ neither %language or %skeleton or equivalent command-line options
+ are used) to leave more time for grammars depending on the old
+ behavior to be adjusted. Future releases of Bison will disable this
+ feature.
+
+** A few minor improvements to the Bison manual.
* Changes in version 2.4 (2008-11-02):
-----
-Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
-2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+Copyright (C) 1995-2012 Free Software Foundation, Inc.
-This file is part of Bison, the GNU Compiler Compiler.
+This file is part of Bison, the GNU Parser Generator.
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
projects / bison.git / blobdiff