@copying
-This manual is for GNU Bison (version @value{VERSION}, @value{UPDATED}),
-the GNU parser generator.
+This manual is for @acronym{GNU} Bison (version @value{VERSION},
+@value{UPDATED}), the @acronym{GNU} parser generator.
Copyright @copyright{} 1988, 1989, 1990, 1991, 1992, 1993, 1995, 1998,
1999, 2000, 2001, 2002 Free Software Foundation, Inc.
@quotation
Permission is granted to copy, distribute and/or modify this document
-under the terms of the GNU Free Documentation License, Version 1.1 or
-any later version published by the Free Software Foundation; with no
-Invariant Sections, with the Front-Cover texts being ``A GNU Manual,''
-and with the Back-Cover Texts as in (a) below. A copy of the
-license is included in the section entitled ``GNU Free Documentation
-License.''
-
-(a) The FSF's Back-Cover Text is: ``You have freedom to copy and modify
-this GNU Manual, like GNU software. Copies published by the Free
-Software Foundation raise funds for GNU development.''
+under the terms of the @acronym{GNU} Free Documentation License,
+Version 1.1 or any later version published by the Free Software
+Foundation; with no Invariant Sections, with the Front-Cover texts
+being ``A @acronym{GNU} Manual,'' and with the Back-Cover Texts as in
+(a) below. A copy of the license is included in the section entitled
+``@acronym{GNU} Free Documentation License.''
+
+(a) The @acronym{FSF}'s Back-Cover Text is: ``You have freedom to copy
+and modify this @acronym{GNU} Manual, like @acronym{GNU} software.
+Copies published by the Free Software Foundation raise funds for
+@acronym{GNU} development.''
@end quotation
@end copying
@dircategory GNU programming tools
@direntry
-* bison: (bison). GNU parser generator (yacc replacement).
+* bison: (bison). @acronym{GNU} parser generator (Yacc replacement).
@end direntry
@ifset shorttitlepage-enabled
@end ifset
@titlepage
@title Bison
-@subtitle The YACC-compatible Parser Generator
+@subtitle The Yacc-compatible Parser Generator
@subtitle @value{UPDATED}, Bison Version @value{VERSION}
@author by Charles Donnelly and Richard Stallman
59 Temple Place, Suite 330 @*
Boston, MA 02111-1307 USA @*
Printed copies are available from the Free Software Foundation.@*
-ISBN 1-882114-44-2
+@acronym{ISBN} 1-882114-44-2
@sp 2
Cover art by Etienne Suvasa.
@end titlepage
@menu
* Introduction::
* Conditions::
-* Copying:: The GNU General Public License says
+* Copying:: The @acronym{GNU} General Public License says
how you can copy and share Bison
Tutorial sections:
* Precedence Decl:: Declaring terminals with precedence and associativity.
* Union Decl:: Declaring the set of all semantic value types.
* Type Decl:: Declaring the choice of type for a nonterminal symbol.
+* Destructor Decl:: Declaring how symbols are freed.
* Expect Decl:: Suppressing warnings about shift/reduce conflicts.
* Start Decl:: Specifying the start symbol.
* Pure Decl:: Requesting a reentrant parser.
Invoking Bison
* Bison Options:: All the options described in detail,
- in alphabetical order by short options.
+ in alphabetical order by short options.
* Option Cross Key:: Alphabetical list of long options.
-* VMS Invocation:: Bison command syntax on VMS.
Frequently Asked Questions
@cindex introduction
@dfn{Bison} is a general-purpose parser generator that converts a
-grammar description for an LALR(1) context-free grammar into a C
+grammar description for an @acronym{LALR}(1) context-free grammar into a C
program to parse that grammar. Once you are proficient with Bison,
you may use it to develop a wide range of language parsers, from those
used in simple desk calculators to complex programming languages.
As of Bison version 1.24, we have changed the distribution terms for
@code{yyparse} to permit using Bison's output in nonfree programs when
-Bison is generating C code for LALR(1) parsers. Formerly, these
+Bison is generating C code for @acronym{LALR}(1) parsers. Formerly, these
parsers could be used only in programs that were free software.
-The other GNU programming tools, such as the GNU C compiler, have never
+The other @acronym{GNU} programming tools, such as the @acronym{GNU} C
+compiler, have never
had such a requirement. They could always be used for nonfree
software. The reason Bison was different was not due to a special
policy decision; it resulted from applying the usual General Public
verbatim copy of a sizable piece of Bison, which is the code for the
@code{yyparse} function. (The actions from your grammar are inserted
into this function at one point, but the rest of the function is not
-changed.) When we applied the GPL terms to the code for @code{yyparse},
+changed.) When we applied the @acronym{GPL} terms to the code for
+@code{yyparse},
the effect was to restrict the use of Bison output to free software.
We didn't change the terms because of sympathy for people who want to
concluded that limiting Bison's use to free software was doing little to
encourage people to make other software free. So we decided to make the
practical conditions for using Bison match the practical conditions for
-using the other GNU tools.
+using the other @acronym{GNU} tools.
This exception applies only when Bison is generating C code for a
-LALR(1) parser; otherwise, the GPL terms operate as usual. You can
+@acronym{LALR}(1) parser; otherwise, the @acronym{GPL} terms operate
+as usual. You can
tell whether the exception applies to your @samp{.c} output file by
inspecting it to see whether it says ``As a special exception, when
this file is copied by Bison into a Bison output file, you may use
recursive, but there must be at least one rule which leads out of the
recursion.
-@cindex BNF
+@cindex @acronym{BNF}
@cindex Backus-Naur form
The most common formal system for presenting such rules for humans to read
-is @dfn{Backus-Naur Form} or ``BNF'', which was developed in order to
-specify the language Algol 60. Any grammar expressed in BNF is a
-context-free grammar. The input to Bison is essentially machine-readable
-BNF.
+is @dfn{Backus-Naur Form} or ``@acronym{BNF}'', which was developed in
+order to specify the language Algol 60. Any grammar expressed in
+@acronym{BNF} is a context-free grammar. The input to Bison is
+essentially machine-readable @acronym{BNF}.
-@cindex LALR(1) grammars
-@cindex LR(1) grammars
+@cindex @acronym{LALR}(1) grammars
+@cindex @acronym{LR}(1) grammars
There are various important subclasses of context-free grammar. Although it
can handle almost all context-free grammars, Bison is optimized for what
-are called LALR(1) grammars.
+are called @acronym{LALR}(1) grammars.
In brief, in these grammars, it must be possible to
tell how to parse any portion of an input string with just a single
token of look-ahead. Strictly speaking, that is a description of an
-LR(1) grammar, and LALR(1) involves additional restrictions that are
+@acronym{LR}(1) grammar, and @acronym{LALR}(1) involves additional
+restrictions that are
hard to explain simply; but it is rare in actual practice to find an
-LR(1) grammar that fails to be LALR(1). @xref{Mystery Conflicts, ,
-Mysterious Reduce/Reduce Conflicts}, for more information on this.
+@acronym{LR}(1) grammar that fails to be @acronym{LALR}(1).
+@xref{Mystery Conflicts, ,Mysterious Reduce/Reduce Conflicts}, for
+more information on this.
-@cindex GLR parsing
-@cindex generalized LR (GLR) parsing
+@cindex @acronym{GLR} parsing
+@cindex generalized @acronym{LR} (@acronym{GLR}) parsing
@cindex ambiguous grammars
@cindex non-deterministic parsing
-Parsers for LALR(1) grammars are @dfn{deterministic}, meaning roughly that
-the next grammar rule to apply at any point in the input is uniquely
-determined by the preceding input and a fixed, finite portion (called
-a @dfn{look-ahead}) of the remaining input.
-A context-free grammar can be @dfn{ambiguous}, meaning that
-there are multiple ways to apply the grammar rules to get the some inputs.
-Even unambiguous grammars can be @dfn{non-deterministic}, meaning that no
-fixed look-ahead always suffices to determine the next grammar rule to apply.
-With the proper declarations, Bison is also able to parse these more general
-context-free grammars, using a technique known as GLR parsing (for
-Generalized LR). Bison's GLR parsers are able to handle any context-free
-grammar for which the number of possible parses of any given string
-is finite.
+
+Parsers for @acronym{LALR}(1) grammars are @dfn{deterministic}, meaning
+roughly that the next grammar rule to apply at any point in the input is
+uniquely determined by the preceding input and a fixed, finite portion
+(called a @dfn{look-ahead}) of the remaining input. A context-free
+grammar can be @dfn{ambiguous}, meaning that there are multiple ways to
+apply the grammar rules to get the some inputs. Even unambiguous
+grammars can be @dfn{non-deterministic}, meaning that no fixed
+look-ahead always suffices to determine the next grammar rule to apply.
+With the proper declarations, Bison is also able to parse these more
+general context-free grammars, using a technique known as @acronym{GLR}
+parsing (for Generalized @acronym{LR}). Bison's @acronym{GLR} parsers
+are able to handle any context-free grammar for which the number of
+possible parses of any given string is finite.
@cindex symbols (abstract)
@cindex token
@cindex syntactic grouping
@cindex grouping, syntactic
-In the formal grammatical rules for a language, each kind of syntactic unit
-or grouping is named by a @dfn{symbol}. Those which are built by grouping
-smaller constructs according to grammatical rules are called
+In the formal grammatical rules for a language, each kind of syntactic
+unit or grouping is named by a @dfn{symbol}. Those which are built by
+grouping smaller constructs according to grammatical rules are called
@dfn{nonterminal symbols}; those which can't be subdivided are called
@dfn{terminal symbols} or @dfn{token types}. We call a piece of input
corresponding to a single terminal symbol a @dfn{token}, and a piece
corresponding to a single nonterminal symbol a @dfn{grouping}.
We can use the C language as an example of what symbols, terminal and
-nonterminal, mean. The tokens of C are identifiers, constants (numeric and
-string), and the various keywords, arithmetic operators and punctuation
-marks. So the terminal symbols of a grammar for C include `identifier',
-`number', `string', plus one symbol for each keyword, operator or
-punctuation mark: `if', `return', `const', `static', `int', `char',
-`plus-sign', `open-brace', `close-brace', `comma' and many more. (These
-tokens can be subdivided into characters, but that is a matter of
+nonterminal, mean. The tokens of C are identifiers, constants (numeric
+and string), and the various keywords, arithmetic operators and
+punctuation marks. So the terminal symbols of a grammar for C include
+`identifier', `number', `string', plus one symbol for each keyword,
+operator or punctuation mark: `if', `return', `const', `static', `int',
+`char', `plus-sign', `open-brace', `close-brace', `comma' and many more.
+(These tokens can be subdivided into characters, but that is a matter of
lexicography, not grammar.)
Here is a simple C function subdivided into tokens:
a @dfn{Bison grammar} file. @xref{Grammar File, ,Bison Grammar Files}.
A nonterminal symbol in the formal grammar is represented in Bison input
-as an identifier, like an identifier in C. By convention, it should be
+as an identifier, like an identifier in C@. By convention, it should be
in lower case, such as @code{expr}, @code{stmt} or @code{declaration}.
The Bison representation for a terminal symbol is also called a @dfn{token
But the precise value is very important for what the input means once it is
parsed. A compiler is useless if it fails to distinguish between 4, 1 and
3989 as constants in the program! Therefore, each token in a Bison grammar
-has both a token type and a @dfn{semantic value}. @xref{Semantics, ,Defining Language Semantics},
+has both a token type and a @dfn{semantic value}. @xref{Semantics,
+,Defining Language Semantics},
for details.
The token type is a terminal symbol defined in the grammar, such as
from the values of the two subexpressions.
@node GLR Parsers
-@section Writing GLR Parsers
-@cindex GLR parsing
-@cindex generalized LR (GLR) parsing
+@section Writing @acronym{GLR} Parsers
+@cindex @acronym{GLR} parsing
+@cindex generalized @acronym{LR} (@acronym{GLR}) parsing
@findex %glr-parser
@cindex conflicts
@cindex shift/reduce conflicts
-In some grammars, there will be cases where Bison's standard LALR(1)
-parsing algorithm cannot decide whether to apply a certain grammar rule
-at a given point. That is, it may not be able to decide (on the basis
-of the input read so far) which of two possible reductions (applications
-of a grammar rule) applies, or whether to apply a reduction or read more
-of the input and apply a reduction later in the input. These are known
-respectively as @dfn{reduce/reduce} conflicts (@pxref{Reduce/Reduce}),
-and @dfn{shift/reduce} conflicts (@pxref{Shift/Reduce}).
-
-To use a grammar that is not easily modified to be LALR(1), a more
-general parsing algorithm is sometimes necessary. If you include
+In some grammars, there will be cases where Bison's standard
+@acronym{LALR}(1) parsing algorithm cannot decide whether to apply a
+certain grammar rule at a given point. That is, it may not be able to
+decide (on the basis of the input read so far) which of two possible
+reductions (applications of a grammar rule) applies, or whether to apply
+a reduction or read more of the input and apply a reduction later in the
+input. These are known respectively as @dfn{reduce/reduce} conflicts
+(@pxref{Reduce/Reduce}), and @dfn{shift/reduce} conflicts
+(@pxref{Shift/Reduce}).
+
+To use a grammar that is not easily modified to be @acronym{LALR}(1), a
+more general parsing algorithm is sometimes necessary. If you include
@code{%glr-parser} among the Bison declarations in your file
-(@pxref{Grammar Outline}), the result will be a Generalized LR (GLR)
-parser. These parsers handle Bison grammars that contain no unresolved
-conflicts (i.e., after applying precedence declarations) identically to
-LALR(1) parsers. However, when faced with unresolved shift/reduce and
-reduce/reduce conflicts, GLR parsers use the simple expedient of doing
-both, effectively cloning the parser to follow both possibilities. Each
-of the resulting parsers can again split, so that at any given time,
-there can be any number of possible parses being explored. The parsers
+(@pxref{Grammar Outline}), the result will be a Generalized @acronym{LR}
+(@acronym{GLR}) parser. These parsers handle Bison grammars that
+contain no unresolved conflicts (i.e., after applying precedence
+declarations) identically to @acronym{LALR}(1) parsers. However, when
+faced with unresolved shift/reduce and reduce/reduce conflicts,
+@acronym{GLR} parsers use the simple expedient of doing both,
+effectively cloning the parser to follow both possibilities. Each of
+the resulting parsers can again split, so that at any given time, there
+can be any number of possible parses being explored. The parsers
proceed in lockstep; that is, all of them consume (shift) a given input
symbol before any of them proceed to the next. Each of the cloned
parsers eventually meets one of two possible fates: either it runs into
user-defined function on the resulting values to produce an arbitrary
merged result.
-Let's consider an example, vastly simplified from C++.
+Let's consider an example, vastly simplified from a C++ grammar.
@example
%@{
| decl %dprec 2
;
-expr : ID @{ printf ("%s ", $$); @}
+expr : ID @{ printf ("%s ", $$); @}
| TYPENAME '(' expr ')'
- @{ printf ("%s <cast> ", $1); @}
- | expr '+' expr @{ printf ("+ "); @}
- | expr '=' expr @{ printf ("= "); @}
+ @{ printf ("%s <cast> ", $1); @}
+ | expr '+' expr @{ printf ("+ "); @}
+ | expr '=' expr @{ printf ("= "); @}
;
decl : TYPENAME declarator ';'
- @{ printf ("%s <declare> ", $1); @}
+ @{ printf ("%s <declare> ", $1); @}
| TYPENAME declarator '=' expr ';'
- @{ printf ("%s <init-declare> ", $1); @}
+ @{ printf ("%s <init-declare> ", $1); @}
;
-declarator : ID @{ printf ("\"%s\" ", $1); @}
+declarator : ID @{ printf ("\"%s\" ", $1); @}
| '(' declarator ')'
;
@end example
@noindent
parses as either an @code{expr} or a @code{stmt}
-(assuming that @samp{T} is recognized as a TYPENAME and @samp{x} as an ID).
+(assuming that @samp{T} is recognized as a @code{TYPENAME} and
+@samp{x} as an @code{ID}).
Bison detects this as a reduce/reduce conflict between the rules
@code{expr : ID} and @code{declarator : ID}, which it cannot resolve at the
time it encounters @code{x} in the example above. The two @code{%dprec}
"x" y z + T <init-declare> x T <cast> y z + = <OR>
@end example
+@sp 1
+
+@cindex @code{incline}
+@cindex @acronym{GLR} parsers and @code{inline}
+Note that the @acronym{GLR} parsers require an ISO C89 compiler. In
+addition, they use the @code{inline} keyword, which is not C89, but a
+common extension. It is up to the user of these parsers to handle
+portability issues. For instance, if using Autoconf and the Autoconf
+macro @code{AC_C_INLINE}, a mere
+
+@example
+%@{
+#include <config.h>
+%@}
+@end example
+
+@noindent
+will suffice. Otherwise, we suggest
+
+@example
+%@{
+#if ! defined __GNUC__ && ! defined inline
+# define inline
+#endif
+%@}
+@end example
@node Locations Overview
@section Locations
In some cases the Bison parser file includes system headers, and in
those cases your code should respect the identifiers reserved by those
-headers. On some non-@sc{gnu} hosts, @code{<alloca.h>},
+headers. On some non-@acronym{GNU} hosts, @code{<alloca.h>},
@code{<stddef.h>}, and @code{<stdlib.h>} are included as needed to
declare memory allocators and related types. Other system headers may
be included if you define @code{YYDEBUG} to a nonzero value
;
line: '\n'
- | exp '\n' @{ printf ("\t%.10g\n", $1); @}
+ | exp '\n' @{ printf ("\t%.10g\n", $1); @}
;
-exp: NUM @{ $$ = $1; @}
- | exp exp '+' @{ $$ = $1 + $2; @}
- | exp exp '-' @{ $$ = $1 - $2; @}
- | exp exp '*' @{ $$ = $1 * $2; @}
- | exp exp '/' @{ $$ = $1 / $2; @}
- /* Exponentiation */
- | exp exp '^' @{ $$ = pow ($1, $2); @}
- /* Unary minus */
- | exp 'n' @{ $$ = -$1; @}
+exp: NUM @{ $$ = $1; @}
+ | exp exp '+' @{ $$ = $1 + $2; @}
+ | exp exp '-' @{ $$ = $1 - $2; @}
+ | exp exp '*' @{ $$ = $1 * $2; @}
+ | exp exp '/' @{ $$ = $1 / $2; @}
+ /* Exponentiation */
+ | exp exp '^' @{ $$ = pow ($1, $2); @}
+ /* Unary minus */
+ | exp 'n' @{ $$ = -$1; @}
;
%%
@end example
tokens by calling the lexical analyzer. @xref{Lexical, ,The Lexical
Analyzer Function @code{yylex}}.
-Only a simple lexical analyzer is needed for the RPN calculator. This
+Only a simple lexical analyzer is needed for the @acronym{RPN}
+calculator. This
lexical analyzer skips blanks and tabs, then reads in numbers as
@code{double} and returns them as @code{NUM} tokens. Any other character
that isn't part of a number is a separate token. Note that the token-code
When @code{yyparse} detects a syntax error, it calls the error reporting
function @code{yyerror} to print an error message (usually but not
-always @code{"parse error"}). It is up to the programmer to supply
+always @code{"syntax error"}). It is up to the programmer to supply
@code{yyerror} (@pxref{Interface, ,Parser C-Language Interface}), so
here is the definition we will use:
#include <stdio.h>
void
-yyerror (const char *s) /* called by yyparse on error */
+yyerror (const char *s) /* Called by yyparse on error. */
@{
printf ("%s\n", s);
@}
@noindent
In this example the file was called @file{rpcalc.y} (for ``Reverse Polish
-CALCulator''). Bison produces a file named @file{@var{file_name}.tab.c},
+@sc{calc}ulator''). Bison produces a file named @file{@var{file_name}.tab.c},
removing the @samp{.y} from the original file name. The file output by
Bison contains the source code for @code{yyparse}. The additional
functions in the input file (@code{yylex}, @code{yyerror} and @code{main})
@group
# @r{Compile the Bison parser.}
# @r{@samp{-lm} tells compiler to search math library for @code{pow}.}
-$ @kbd{cc rpcalc.tab.c -lm -o rpcalc}
+$ @kbd{cc -lm -o rpcalc rpcalc.tab.c}
@end group
@group
#include <math.h>
%@}
-/* BISON Declarations */
+/* Bison Declarations */
%token NUM
%left '-' '+'
%left '*' '/'
@end example
This addition to the grammar allows for simple error recovery in the
-event of a parse error. If an expression that cannot be evaluated is
+event of a syntax error. If an expression that cannot be evaluated is
read, the error will be recognized by the third rule for @code{line},
and parsing will continue. (The @code{yyerror} function is still called
upon to print its message as well.) The action executes the statement
yylex (void)
@{
int c;
+@end group
+@group
/* Skip white space. */
while ((c = getchar ()) == ' ' || c == '\t')
++yylloc.last_column;
+@end group
+@group
/* Step. */
yylloc.first_line = yylloc.last_line;
yylloc.first_column = yylloc.last_column;
Here are the C and Bison declarations for the multi-function calculator.
@smallexample
+@group
%@{
#include <math.h> /* For math functions, cos(), sin(), etc. */
-#include "calc.h" /* Contains definition of `symrec' */
+#include "calc.h" /* Contains definition of `symrec' */
%@}
+@end group
+@group
%union @{
-double val; /* For returning numbers. */
-symrec *tptr; /* For returning symbol-table pointers */
+ double val; /* For returning numbers. */
+ symrec *tptr; /* For returning symbol-table pointers. */
@}
-
-%token <val> NUM /* Simple double precision number */
-%token <tptr> VAR FNCT /* Variable and Function */
+@end group
+%token <val> NUM /* Simple double precision number. */
+%token <tptr> VAR FNCT /* Variable and Function. */
%type <val> exp
+@group
%right '='
%left '-' '+'
%left '*' '/'
%left NEG /* Negation--unary minus */
%right '^' /* Exponentiation */
-
+@end group
/* Grammar follows */
-
%%
@end smallexample
those which mention @code{VAR} or @code{FNCT}, are new.
@smallexample
+@group
input: /* empty */
| input line
;
+@end group
+@group
line:
'\n'
| exp '\n' @{ printf ("\t%.10g\n", $1); @}
| error '\n' @{ yyerrok; @}
;
+@end group
+@group
exp: NUM @{ $$ = $1; @}
| VAR @{ $$ = $1->value.var; @}
| VAR '=' exp @{ $$ = $3; $1->value.var = $3; @}
| exp '^' exp @{ $$ = pow ($1, $3); @}
| '(' exp ')' @{ $$ = $2; @}
;
+@end group
/* End of grammar */
%%
@end smallexample
@group
/* Function type. */
typedef double (*func_t) (double);
+@end group
+@group
/* Data type for links in the chain of symbols. */
struct symrec
@{
@code{init_table} as well:
@smallexample
-@group
#include <stdio.h>
+@group
int
main (void)
@{
@group
void
-yyerror (const char *s) /* Called by yyparse on error */
+yyerror (const char *s) /* Called by yyparse on error. */
@{
printf ("%s\n", s);
@}
+@end group
+@group
struct init
@{
char *fname;
"sqrt", sqrt,
0, 0
@};
+@end group
+@group
/* The symbol table: a chain of `struct symrec'. */
symrec *sym_table = (symrec *) 0;
@end group
@smallexample
@group
#include <ctype.h>
+@end group
+@group
int
yylex (void)
@{
if (i == length)
@{
length *= 2;
- symbuf = (char *)realloc (symbuf, length + 1);
+ symbuf = (char *) realloc (symbuf, length + 1);
@}
/* Add this character to the buffer. */
symbuf[i++] = c;
@end example
Comments enclosed in @samp{/* @dots{} */} may appear in any of the sections.
+As a @acronym{GNU} extension, @samp{//} introduces a comment that
+continues until end of line.
@menu
* Prologue:: Syntax and usage of the prologue.
@itemize @bullet
@item
A @dfn{named token type} is written with an identifier, like an
-identifier in C. By convention, it should be all upper case. Each
+identifier in C@. By convention, it should be all upper case. Each
such name must be defined with a Bison declaration such as
@code{%token}. @xref{Token Decl, ,Token Type Names}.
used in Bison as well, but you must not use the null character as a
character literal because its numeric code, zero, signifies
end-of-input (@pxref{Calling Convention, ,Calling Convention
-for @code{yylex}}).
+for @code{yylex}}). Also, unlike standard C, trigraphs have no
+special meaning in Bison character literals, nor is backslash-newline
+allowed.
@item
@cindex string token
retrieve the token number for the literal string token from the
@code{yytname} table (@pxref{Calling Convention}).
-@strong{WARNING}: literal string tokens do not work in Yacc.
+@strong{Warning}: literal string tokens do not work in Yacc.
By convention, a literal string token is used only to represent a token
that consists of that particular string. Thus, you should use the token
read your program will be confused.
All the escape sequences used in string literals in C can be used in
-Bison as well. A literal string token must contain two or more
-characters; for a token containing just one character, use a character
-token (see above).
+Bison as well. However, unlike Standard C, trigraphs have no special
+meaning in Bison string literals, nor is backslash-newline allowed. A
+literal string token must contain two or more characters; for a token
+containing just one character, use a character token (see above).
@end itemize
How you choose to write a terminal symbol has no effect on its
If you want to write a grammar that is portable to any Standard C
host, you must use only non-null character tokens taken from the basic
-execution character set of Standard C. This set consists of the ten
+execution character set of Standard C@. This set consists of the ten
digits, the 52 lower- and upper-case English letters, and the
characters in the following C-language string:
The @code{yylex} function and Bison must use a consistent character
set and encoding for character tokens. For example, if you run Bison in an
-@sc{ascii} environment, but then compile and run the resulting program
+@acronym{ASCII} environment, but then compile and run the resulting program
in an environment that uses an incompatible character set like
-@sc{ebcdic}, the resulting program may not work because the
-tables generated by Bison will assume @sc{ascii} numeric values for
+@acronym{EBCDIC}, the resulting program may not work because the
+tables generated by Bison will assume @acronym{ASCII} numeric values for
character tokens. It is standard
practice for software distributions to contain C source files that
-were generated by Bison in an @sc{ascii} environment, so installers on
-platforms that are incompatible with @sc{ascii} must rebuild those
+were generated by Bison in an @acronym{ASCII} environment, so installers on
+platforms that are incompatible with @acronym{ASCII} must rebuild those
files before compiling them.
The symbol @code{error} is a terminal symbol reserved for error recovery
In a simple program it may be sufficient to use the same data type for
the semantic values of all language constructs. This was true in the
-RPN and infix calculator examples (@pxref{RPN Calc, ,Reverse Polish
+@acronym{RPN} and infix calculator examples (@pxref{RPN Calc, ,Reverse Polish
Notation Calculator}).
Bison's default is to use type @code{int} for all semantic values. To
semantic values associated with tokens or smaller groupings.
An action consists of C statements surrounded by braces, much like a
-compound statement in C. It can be placed at any position in the rule;
+compound statement in C@. An action can contain any sequence of C
+statements. Bison does not look for trigraphs, though, so if your C
+code uses trigraphs you should ensure that they do not affect the
+nesting of braces or the boundaries of comments, strings, or character
+literals.
+
+An action can be placed at any position in the rule;
it is executed at that position. Most rules have just one action at the
end of the rule, following all the components. Actions in the middle of
a rule are tricky and used only for special purposes (@pxref{Mid-Rule
@cindex default action
If you don't specify an action for a rule, Bison supplies a default:
-@w{@code{$$ = $1}.} Thus, the value of the first symbol in the rule becomes
-the value of the whole rule. Of course, the default rule is valid only
-if the two data types match. There is no meaningful default action for
-an empty rule; every empty rule must have an explicit action unless the
-rule's value does not matter.
+@w{@code{$$ = $1}.} Thus, the value of the first symbol in the rule
+becomes the value of the whole rule. Of course, the default action is
+valid only if the two data types match. There is no meaningful default
+action for an empty rule; every empty rule must have an explicit action
+unless the rule's value does not matter.
@code{$@var{n}} with @var{n} zero or negative is allowed for reference
to tokens and groupings on the stack @emph{before} those that match the
is an array holding locations of all right hand side elements of the rule
being matched. The last one is the size of the right hand side rule.
-By default, it is defined this way for simple LALR(1) parsers:
+By default, it is defined this way for simple @acronym{LALR}(1) parsers:
@example
@group
@end example
@noindent
-and like this for GLR parsers:
+and like this for @acronym{GLR} parsers:
@example
@group
* Precedence Decl:: Declaring terminals with precedence and associativity.
* Union Decl:: Declaring the set of all semantic value types.
* Type Decl:: Declaring the choice of type for a nonterminal symbol.
+* Destructor Decl:: Declaring how symbols are freed.
* Expect Decl:: Suppressing warnings about shift/reduce conflicts.
* Start Decl:: Specifying the start symbol.
* Pure Decl:: Requesting a reentrant parser.
terminal symbol. All kinds of token declarations allow
@code{<@var{type}>}.
+@node Destructor Decl
+@subsection Freeing Discarded Symbols
+@cindex freeing discarded symbols
+@findex %destructor
+
+Some symbols can be discarded by the parser, typically during error
+recovery (@pxref{Error Recovery}). Basically, during error recovery,
+embarrassing symbols already pushed on the stack, and embarrassing
+tokens coming from the rest of the file are thrown away until the parser
+falls on its feet. If these symbols convey heap based information, this
+memory is lost. While this behavior is tolerable for batch parsers,
+such as in compilers, it is unacceptable for parsers that can
+possibility ``never end'' such as shells, or implementations of
+communication protocols.
+
+The @code{%destructor} directive allows for the definition of code that
+is called when a symbol is thrown away.
+
+@deffn {Directive} %destructor @{ @var{code} @} @var{symbols}
+@findex %destructor
+Declare that the @var{code} must be invoked for each of the
+@var{symbols} that will be discarded by the parser. The @var{code}
+should use @code{$$} to designate the semantic value associated to the
+@var{symbols}. The additional parser parameters are also avaible
+(@pxref{Parser Function, , The Parser Function @code{yyparse}}).
+
+@strong{Warning:} as of Bison 1.875, this feature is still considered as
+experimental, as there was not enough users feedback. In particular,
+the syntax might still change.
+@end deffn
+
+For instance:
+
+@smallexample
+%union
+@{
+ char *string;
+@}
+%token <string> STRING
+%type <string> string
+%destructor @{ free ($$); @} STRING string
+@end smallexample
+
+@noindent
+guarantees that when a @code{STRING} or a @code{string} will be discarded,
+its associated memory will be freed.
+
+Note that in the future, Bison might also consider that right hand side
+members that are not mentioned in the action can be destroyed. For
+instance, in:
+
+@smallexample
+comment: "/*" STRING "*/";
+@end smallexample
+
+@noindent
+the parser is entitled to destroy the semantic value of the
+@code{string}. Of course, this will not apply to the default action;
+compare:
+
+@smallexample
+typeless: string; // $$ = $1 does not apply; $1 is destroyed.
+typefull: string; // $$ = $1 applies, $1 is not destroyed.
+@end smallexample
+
@node Expect Decl
@subsection Suppressing Conflict Warnings
@cindex suppressing conflict warnings
program must be called only within interlocks.
Normally, Bison generates a parser which is not reentrant. This is
-suitable for most uses, and it permits compatibility with YACC. (The
-standard YACC interfaces are inherently nonreentrant, because they use
+suitable for most uses, and it permits compatibility with Yacc. (The
+standard Yacc interfaces are inherently nonreentrant, because they use
statically allocated variables for communication with @code{yylex},
including @code{yylval} and @code{yylloc}.)
Here is a summary of the declarations used to define a grammar:
-@table @code
-@item %union
+@deffn {Directive} %union
Declare the collection of data types that semantic values may have
(@pxref{Union Decl, ,The Collection of Value Types}).
+@end deffn
-@item %token
+@deffn {Directive} %token
Declare a terminal symbol (token type name) with no precedence
or associativity specified (@pxref{Token Decl, ,Token Type Names}).
+@end deffn
-@item %right
+@deffn {Directive} %right
Declare a terminal symbol (token type name) that is right-associative
(@pxref{Precedence Decl, ,Operator Precedence}).
+@end deffn
-@item %left
+@deffn {Directive} %left
Declare a terminal symbol (token type name) that is left-associative
(@pxref{Precedence Decl, ,Operator Precedence}).
+@end deffn
-@item %nonassoc
+@deffn {Directive} %nonassoc
Declare a terminal symbol (token type name) that is nonassociative
(using it in a way that would be associative is a syntax error)
+@end deffn
(@pxref{Precedence Decl, ,Operator Precedence}).
-@item %type
+@deffn {Directive} %type
Declare the type of semantic values for a nonterminal symbol
(@pxref{Type Decl, ,Nonterminal Symbols}).
+@end deffn
-@item %start
+@deffn {Directive} %start
Specify the grammar's start symbol (@pxref{Start Decl, ,The
Start-Symbol}).
+@end deffn
-@item %expect
+@deffn {Directive} %expect
Declare the expected number of shift-reduce conflicts
(@pxref{Expect Decl, ,Suppressing Conflict Warnings}).
-@end table
+@end deffn
+
@sp 1
@noindent
In order to change the behavior of @command{bison}, use the following
directives:
-@table @code
-@item %debug
+@deffn {Directive} %debug
In the parser file, define the macro @code{YYDEBUG} to 1 if it is not
already defined, so that the debugging facilities are compiled.
+@end deffn
@xref{Tracing, ,Tracing Your Parser}.
-@item %defines
+@deffn {Directive} %defines
Write an extra output file containing macro definitions for the token
type names defined in the grammar and the semantic value type
@code{YYSTYPE}, as well as a few @code{extern} variable declarations.
@code{yylex} in a separate source file, because @code{yylex} needs to
be able to refer to token type codes and the variable
@code{yylval}. @xref{Token Values, ,Semantic Values of Tokens}.
+@end deffn
-@item %file-prefix="@var{prefix}"
+@deffn {Directive} %destructor
+Specifying how the parser should reclaim the memory associated to
+discarded symbols. @xref{Destructor Decl, , Freeing Discarded Symbols}.
+@end deffn
+
+@deffn {Directive} %file-prefix="@var{prefix}"
Specify a prefix to use for all Bison output file names. The names are
chosen as if the input file were named @file{@var{prefix}.y}.
+@end deffn
-@c @item %header-extension
-@c Specify the extension of the parser header file generated when
-@c @code{%define} or @samp{-d} are used.
-@c
-@c For example, a grammar file named @file{foo.ypp} and containing a
-@c @code{%header-extension .hh} directive will produce a header file
-@c named @file{foo.tab.hh}
-
-@item %locations
+@deffn {Directive} %locations
Generate the code processing the locations (@pxref{Action Features,
,Special Features for Use in Actions}). This mode is enabled as soon as
the grammar uses the special @samp{@@@var{n}} tokens, but if your
grammar does not use it, using @samp{%locations} allows for more
-accurate parse error messages.
+accurate syntax error messages.
+@end deffn
-@item %name-prefix="@var{prefix}"
+@deffn {Directive} %name-prefix="@var{prefix}"
Rename the external symbols used in the parser so that they start with
@var{prefix} instead of @samp{yy}. The precise list of symbols renamed
is @code{yyparse}, @code{yylex}, @code{yyerror}, @code{yynerrs},
-@code{yylval}, @code{yychar}, @code{yydebug}, and possible
-@code{yylloc}. For example, if you use @samp{%name-prefix="c_"}, the
-names become @code{c_parse}, @code{c_lex}, and so on. @xref{Multiple
-Parsers, ,Multiple Parsers in the Same Program}.
-
-@item %no-parser
+@code{yylval}, @code{yylloc}, @code{yychar}, @code{yydebug}, and
+possible @code{yylloc}. For example, if you use
+@samp{%name-prefix="c_"}, the names become @code{c_parse}, @code{c_lex},
+and so on. @xref{Multiple Parsers, ,Multiple Parsers in the Same
+Program}.
+@end deffn
+
+@deffn {Directive} %no-parser
Do not include any C code in the parser file; generate tables only. The
parser file contains just @code{#define} directives and static variable
declarations.
This option also tells Bison to write the C code for the grammar actions
into a file named @file{@var{filename}.act}, in the form of a
brace-surrounded body fit for a @code{switch} statement.
+@end deffn
-@item %no-lines
+@deffn {Directive} %no-lines
Don't generate any @code{#line} preprocessor commands in the parser
file. Ordinarily Bison writes these commands in the parser file so that
the C compiler and debuggers will associate errors and object code with
your source file (the grammar file). This directive causes them to
associate errors with the parser file, treating it an independent source
file in its own right.
+@end deffn
-@item %output="@var{filename}"
+@deffn {Directive} %output="@var{filename}"
Specify the @var{filename} for the parser file.
+@end deffn
-@item %pure-parser
+@deffn {Directive} %pure-parser
Request a pure (reentrant) parser program (@pxref{Pure Decl, ,A Pure
(Reentrant) Parser}).
+@end deffn
-@c @item %source-extension
-@c Specify the extension of the parser output file.
-@c
-@c For example, a grammar file named @file{foo.yy} and containing a
-@c @code{%source-extension .cpp} directive will produce a parser file
-@c named @file{foo.tab.cpp}
-
-@item %token-table
+@deffn {Directive} %token-table
Generate an array of token names in the parser file. The name of the
array is @code{yytname}; @code{yytname[@var{i}]} is the name of the
token whose internal Bison token code number is @var{i}. The first
@item YYNSTATES
The number of parser states (@pxref{Parser States}).
@end table
+@end deffn
-@item %verbose
+@deffn {Directive} %verbose
Write an extra output file containing verbose descriptions of the
parser states and what is done for each type of look-ahead token in
that state. @xref{Understanding, , Understanding Your Parser}, for more
information.
+@end deffn
-
-
-@item %yacc
+@deffn {Directive} %yacc
Pretend the option @option{--yacc} was given, i.e., imitate Yacc,
including its naming conventions. @xref{Bison Options}, for more.
-@end table
-
-
+@end deffn
@node Multiple Parsers
names that do not conflict.
The precise list of symbols renamed is @code{yyparse}, @code{yylex},
-@code{yyerror}, @code{yynerrs}, @code{yylval}, @code{yychar} and
-@code{yydebug}. For example, if you use @samp{-p c}, the names become
-@code{cparse}, @code{clex}, and so on.
+@code{yyerror}, @code{yynerrs}, @code{yylval}, @code{yylloc},
+@code{yychar} and @code{yydebug}. For example, if you use @samp{-p c},
+the names become @code{cparse}, @code{clex}, and so on.
@strong{All the other variables and macros associated with Bison are not
renamed.} These others are not global; there is no conflict if the same
write an action which directs @code{yyparse} to return immediately
without reading further.
+
+@deftypefun int yyparse (void)
The value returned by @code{yyparse} is 0 if parsing was successful (return
is due to end-of-input).
The value is 1 if parsing failed (return is due to a syntax error).
+@end deftypefun
In an action, you can cause immediate return from @code{yyparse} by using
these macros:
-@table @code
-@item YYACCEPT
+@defmac YYACCEPT
@findex YYACCEPT
Return immediately with value 0 (to report success).
+@end defmac
-@item YYABORT
+@defmac YYABORT
@findex YYABORT
Return immediately with value 1 (to report failure).
-@end table
+@end defmac
+
+If you use a reentrant parser, you can optionally pass additional
+parameter information to it in a reentrant way. To do so, use the
+declaration @code{%parse-param}:
+
+@deffn {Directive} %parse-param @{@var{argument-declaration}@}, @{@var{argument-name}@}
+@findex %parse-param
+Declare that @code{argument-name} is an additional @code{yyparse}
+argument. This argument is also passed to @code{yyerror}. The
+@var{argument-declaration} is used when declaring functions or
+prototypes.
+@end deffn
+
+Here's an example. Write this in the parser:
+
+@example
+%parse-param @{int *nastiness@}, @{nastiness@}
+%parse-param @{int *randomness@}, @{randomness@}
+@end example
+
+@noindent
+Then call the parser like this:
+
+@example
+@{
+ int nastiness, randomness;
+ @dots{} /* @r{Store proper data in @code{nastiness} and @code{randomness}.} */
+ value = yyparse (&nastiness, &randomness);
+ @dots{}
+@}
+@end example
+
+@noindent
+In the grammar actions, use expressions like this to refer to the data:
+
+@example
+exp: @dots{} @{ @dots{}; *randomness += 1; @dots{} @}
+@end example
+
@node Lexical
@section The Lexical Analyzer Function @code{yylex}
@{
if (yytname[i] != 0
&& yytname[i][0] == '"'
- && strncmp (yytname[i] + 1, token_buffer,
- strlen (token_buffer))
+ && ! strncmp (yytname[i] + 1, token_buffer,
+ strlen (token_buffer))
&& yytname[i][strlen (token_buffer) + 1] == '"'
&& yytname[i][strlen (token_buffer) + 2] == 0)
break;
this case, omit the second argument; @code{yylex} will be called with
only one argument.
-@vindex YYPARSE_PARAM
-If you use a reentrant parser, you can optionally pass additional
-parameter information to it in a reentrant way. To do so, define the
-macro @code{YYPARSE_PARAM} as a variable name. This modifies the
-@code{yyparse} function to accept one argument, of type @code{void *},
-with that name.
-When you call @code{yyparse}, pass the address of an object, casting the
-address to @code{void *}. The grammar actions can refer to the contents
-of the object by casting the pointer value back to its proper type and
-then dereferencing it. Here's an example. Write this in the parser:
+If you wish to pass the additional parameter data to @code{yylex}, use
+@code{%lex-param} just like @code{%parse-param} (@pxref{Parser
+Function}).
-@example
-%@{
-struct parser_control
-@{
- int nastiness;
- int randomness;
-@};
+@deffn {Directive} lex-param @{@var{argument-declaration}@}, @{@var{argument-name}@}
+@findex %lex-param
+Declare that @code{argument-name} is an additional @code{yylex}
+argument.
+@end deffn
-#define YYPARSE_PARAM parm
-%@}
-@end example
-
-@noindent
-Then call the parser like this:
+For instance:
@example
-struct parser_control
-@{
- int nastiness;
- int randomness;
-@};
-
-@dots{}
-
-@{
- struct parser_control foo;
- @dots{} /* @r{Store proper data in @code{foo}.} */
- value = yyparse ((void *) &foo);
- @dots{}
-@}
+%parse-param @{int *nastiness@}, @{nastiness@}
+%lex-param @{int *nastiness@}, @{nastiness@}
+%parse-param @{int *randomness@}, @{randomness@}
@end example
@noindent
-In the grammar actions, use expressions like this to refer to the data:
+results in the following signature:
@example
-((struct parser_control *) parm)->randomness
+int yylex (int *nastiness);
+int yyparse (int *nastiness, int *randomness);
@end example
-@vindex YYLEX_PARAM
-If you wish to pass the additional parameter data to @code{yylex},
-define the macro @code{YYLEX_PARAM} just like @code{YYPARSE_PARAM}, as
-shown here:
+If @code{%pure-parser} is added:
@example
-%@{
-struct parser_control
-@{
- int nastiness;
- int randomness;
-@};
-
-#define YYPARSE_PARAM parm
-#define YYLEX_PARAM parm
-%@}
+int yylex (YYSTYPE *lvalp, int *nastiness);
+int yyparse (int *nastiness, int *randomness);
@end example
-You should then define @code{yylex} to accept one additional
-argument---the value of @code{parm}. (This makes either two or three
-arguments in total, depending on whether an argument of type
-@code{YYLTYPE} is passed.) You can declare the argument as a pointer to
-the proper object type, or you can declare it as @code{void *} and
-access the contents as shown above.
+@noindent
+and finally, if both @code{%pure-parser} and @code{%locations} are used:
-You can use @samp{%pure-parser} to request a reentrant parser without
-also using @code{YYPARSE_PARAM}. Then you should call @code{yyparse}
-with no arguments, as usual.
+@example
+int yylex (YYSTYPE *lvalp, YYLTYPE *llocp, int *nastiness);
+int yyparse (int *nastiness, int *randomness);
+@end example
@node Error Reporting
@section The Error Reporting Function @code{yyerror}
@cindex parse error
@cindex syntax error
-The Bison parser detects a @dfn{parse error} or @dfn{syntax error}
+The Bison parser detects a @dfn{syntax error} or @dfn{parse error}
whenever it reads a token which cannot satisfy any syntax rule. An
action in the grammar can also explicitly proclaim an error, using the
macro @code{YYERROR} (@pxref{Action Features, ,Special Features for Use
The Bison parser expects to report the error by calling an error
reporting function named @code{yyerror}, which you must supply. It is
called by @code{yyparse} whenever a syntax error is found, and it
-receives one argument. For a parse error, the string is normally
-@w{@code{"parse error"}}.
+receives one argument. For a syntax error, the string is normally
+@w{@code{"syntax error"}}.
-@findex YYERROR_VERBOSE
-If you define the macro @code{YYERROR_VERBOSE} in the Bison declarations
-section (@pxref{Bison Declarations, ,The Bison Declarations Section}),
-then Bison provides a more verbose and specific error message string
-instead of just plain @w{@code{"parse error"}}. It doesn't matter what
-definition you use for @code{YYERROR_VERBOSE}, just whether you define
-it.
+@findex %error-verbose
+If you invoke the directive @code{%error-verbose} in the Bison
+declarations section (@pxref{Bison Declarations, ,The Bison Declarations
+Section}), then Bison provides a more verbose and specific error message
+string instead of just plain @w{@code{"syntax error"}}.
The parser can detect one other kind of error: stack overflow. This
happens when the input contains constructions that are very deeply
@example
@group
void
-yyerror (char *s)
+yyerror (const char *s)
@{
@end group
@group
(@pxref{Error Recovery}). If recovery is impossible, @code{yyparse} will
immediately return 1.
+Obviously, in location tracking pure parsers, @code{yyerror} should have
+an access to the current location. This is indeed the case for the GLR
+parsers, but not for the Yacc parser, for historical reasons. I.e., if
+@samp{%locations %pure-parser} is passed then the prototypes for
+@code{yyerror} are:
+
+@example
+void yyerror (const char *msg); /* Yacc parsers. */
+void yyerror (YYLTYPE *locp, const char *msg); /* GLR parsers. */
+@end example
+
+If @samp{%parse-param @{int *nastiness@}, @{nastiness@}} is used, then:
+
+@example
+void yyerror (int *randomness, const char *msg); /* Yacc parsers. */
+void yyerror (int *randomness, const char *msg); /* GLR parsers. */
+@end example
+
+Finally, GLR and Yacc parsers share the same @code{yyerror} calling
+convention for absolutely pure parsers, i.e., when the calling
+convention of @code{yylex} @emph{and} the calling convention of
+@code{%pure-parser} are pure. I.e.:
+
+@example
+/* Location tracking. */
+%locations
+/* Pure yylex. */
+%pure-parser
+%lex-param @{int *nastiness@}, @{nastiness@}
+/* Pure yyparse. */
+%parse-param @{int *nastiness@}, @{nastiness@}
+%parse-param @{int *randomness@}, @{randomness@}
+@end example
+
+@noindent
+results in the following signatures for all the parser kinds:
+
+@example
+int yylex (YYSTYPE *lvalp, YYLTYPE *llocp, int *nastiness);
+int yyparse (int *nastiness, int *randomness);
+void yyerror (YYLTYPE *locp,
+ int *nastiness, int *randomness,
+ const char *msg);
+@end example
+
+@noindent
+Please, note that the prototypes are only indications of how the code
+produced by Bison will use @code{yyerror}; you still have freedom on the
+exit value, and even on making @code{yyerror} a variadic function. It
+is precisely to enable this that the message is always passed last.
+
@vindex yynerrs
The variable @code{yynerrs} contains the number of syntax errors
encountered so far. Normally this variable is global; but if you
Here is a table of Bison constructs, variables and macros that
are useful in actions.
-@table @samp
-@item $$
+@deffn {Variable} $$
Acts like a variable that contains the semantic value for the
grouping made by the current rule. @xref{Actions}.
+@end deffn
-@item $@var{n}
+@deffn {Variable} $@var{n}
Acts like a variable that contains the semantic value for the
@var{n}th component of the current rule. @xref{Actions}.
+@end deffn
-@item $<@var{typealt}>$
+@deffn {Variable} $<@var{typealt}>$
Like @code{$$} but specifies alternative @var{typealt} in the union
specified by the @code{%union} declaration. @xref{Action Types, ,Data
Types of Values in Actions}.
+@end deffn
-@item $<@var{typealt}>@var{n}
+@deffn {Variable} $<@var{typealt}>@var{n}
Like @code{$@var{n}} but specifies alternative @var{typealt} in the
union specified by the @code{%union} declaration.
@xref{Action Types, ,Data Types of Values in Actions}.
+@end deffn
-@item YYABORT;
+@deffn {Macro} YYABORT;
Return immediately from @code{yyparse}, indicating failure.
@xref{Parser Function, ,The Parser Function @code{yyparse}}.
+@end deffn
-@item YYACCEPT;
+@deffn {Macro} YYACCEPT;
Return immediately from @code{yyparse}, indicating success.
@xref{Parser Function, ,The Parser Function @code{yyparse}}.
+@end deffn
-@item YYBACKUP (@var{token}, @var{value});
+@deffn {Macro} YYBACKUP (@var{token}, @var{value});
@findex YYBACKUP
Unshift a token. This macro is allowed only for rules that reduce
a single value, and only when there is no look-ahead token.
-It is also disallowed in GLR parsers.
+It is also disallowed in @acronym{GLR} parsers.
It installs a look-ahead token with token type @var{token} and
semantic value @var{value}; then it discards the value that was
going to be reduced by this rule.
recovery.
In either case, the rest of the action is not executed.
+@end deffn
-@item YYEMPTY
+@deffn {Macro} YYEMPTY
@vindex YYEMPTY
Value stored in @code{yychar} when there is no look-ahead token.
+@end deffn
-@item YYERROR;
+@deffn {Macro} YYERROR;
@findex YYERROR
Cause an immediate syntax error. This statement initiates error
recovery just as if the parser itself had detected an error; however, it
does not call @code{yyerror}, and does not print any message. If you
want to print an error message, call @code{yyerror} explicitly before
the @samp{YYERROR;} statement. @xref{Error Recovery}.
+@end deffn
-@item YYRECOVERING
+@deffn {Macro} YYRECOVERING
This macro stands for an expression that has the value 1 when the parser
is recovering from a syntax error, and 0 the rest of the time.
@xref{Error Recovery}.
+@end deffn
-@item yychar
+@deffn {Variable} yychar
Variable containing the current look-ahead token. (In a pure parser,
this is actually a local variable within @code{yyparse}.) When there is
no look-ahead token, the value @code{YYEMPTY} is stored in the variable.
@xref{Look-Ahead, ,Look-Ahead Tokens}.
+@end deffn
-@item yyclearin;
+@deffn {Macro} yyclearin;
Discard the current look-ahead token. This is useful primarily in
error rules. @xref{Error Recovery}.
+@end deffn
-@item yyerrok;
+@deffn {Macro} yyerrok;
Resume generating error messages immediately for subsequent syntax
errors. This is useful primarily in error rules.
@xref{Error Recovery}.
+@end deffn
-@item @@$
+@deffn {Value} @@$
@findex @@$
Acts like a structure variable containing information on the textual position
of the grouping made by the current rule. @xref{Locations, ,
@c those members.
@c The use of this feature makes the parser noticeably slower.
+@end deffn
-@item @@@var{n}
+@deffn {Value} @@@var{n}
@findex @@@var{n}
Acts like a structure variable containing information on the textual position
of the @var{n}th component of the current rule. @xref{Locations, ,
Tracking Locations}.
+@end deffn
-@end table
@node Algorithm
@chapter The Bison Parser Algorithm
It would seem that this grammar can be parsed with only a single token
of look-ahead: when a @code{param_spec} is being read, an @code{ID} is
a @code{name} if a comma or colon follows, or a @code{type} if another
-@code{ID} follows. In other words, this grammar is LR(1).
+@code{ID} follows. In other words, this grammar is @acronym{LR}(1).
-@cindex LR(1)
-@cindex LALR(1)
+@cindex @acronym{LR}(1)
+@cindex @acronym{LALR}(1)
However, Bison, like most parser generators, cannot actually handle all
-LR(1) grammars. In this grammar, two contexts, that after an @code{ID}
+@acronym{LR}(1) grammars. In this grammar, two contexts, that after
+an @code{ID}
at the beginning of a @code{param_spec} and likewise at the beginning of
a @code{return_spec}, are similar enough that Bison assumes they are the
same. They appear similar because the same set of rules would be
that the rules would require different look-ahead tokens in the two
contexts, so it makes a single parser state for them both. Combining
the two contexts causes a conflict later. In parser terminology, this
-occurrence means that the grammar is not LALR(1).
+occurrence means that the grammar is not @acronym{LALR}(1).
In general, it is better to fix deficiencies than to document them. But
this particular deficiency is intrinsically hard to fix; parser
-generators that can handle LR(1) grammars are hard to write and tend to
+generators that can handle @acronym{LR}(1) grammars are hard to write
+and tend to
produce parsers that are very large. In practice, Bison is more useful
as it is now.
@end example
@node Generalized LR Parsing
-@section Generalized LR (GLR) Parsing
-@cindex GLR parsing
-@cindex generalized LR (GLR) parsing
+@section Generalized @acronym{LR} (@acronym{GLR}) Parsing
+@cindex @acronym{GLR} parsing
+@cindex generalized @acronym{LR} (@acronym{GLR}) parsing
@cindex ambiguous grammars
@cindex non-deterministic parsing
When you use the @samp{%glr-parser} declaration in your grammar file,
Bison generates a parser that uses a different algorithm, called
-Generalized LR (or GLR). A Bison GLR parser uses the same basic
+Generalized @acronym{LR} (or @acronym{GLR}). A Bison @acronym{GLR}
+parser uses the same basic
algorithm for parsing as an ordinary Bison parser, but behaves
differently in cases where there is a shift-reduce conflict that has not
been resolved by precedence rules (@pxref{Precedence}) or a
-reduce-reduce conflict. When a GLR parser encounters such a situation, it
+reduce-reduce conflict. When a @acronym{GLR} parser encounters such a
+situation, it
effectively @emph{splits} into a several parsers, one for each possible
shift or reduction. These parsers then proceed as usual, consuming
tokens in lock-step. Some of the stacks may encounter other conflicts
and split further, with the result that instead of a sequence of states,
-a Bison GLR parsing stack is what is in effect a tree of states.
+a Bison @acronym{GLR} parsing stack is what is in effect a tree of states.
In effect, each stack represents a guess as to what the proper parse
is. Additional input may indicate that a guess was wrong, in which case
stream.
Whenever the parser makes a transition from having multiple
-states to having one, it reverts to the normal LALR(1) parsing
+states to having one, it reverts to the normal @acronym{LALR}(1) parsing
algorithm, after resolving and executing the saved-up actions.
At this transition, some of the states on the stack will have semantic
values that are sets (actually multisets) of possible actions. The
Bison resolves and evaluates both and then calls the merge function on
the result. Otherwise, it reports an ambiguity.
-It is possible to use a data structure for the GLR parsing tree that
-permits the processing of any LALR(1) grammar in linear time (in the
-size of the input), any unambiguous (not necessarily LALR(1)) grammar in
+It is possible to use a data structure for the @acronym{GLR} parsing tree that
+permits the processing of any @acronym{LALR}(1) grammar in linear time (in the
+size of the input), any unambiguous (not necessarily
+@acronym{LALR}(1)) grammar in
quadratic worst-case time, and any general (possibly ambiguous)
context-free grammar in cubic worst-case time. However, Bison currently
uses a simpler data structure that requires time proportional to the
behaving examples, however, are not generally of practical interest.
Usually, non-determinism in a grammar is local---the parser is ``in
doubt'' only for a few tokens at a time. Therefore, the current data
-structure should generally be adequate. On LALR(1) portions of a
+structure should generally be adequate. On @acronym{LALR}(1) portions of a
grammar, in particular, it is only slightly slower than with the default
Bison parser.
returns a nonzero value, pausing only to call @code{yyerror} to report
the overflow.
-Becaue Bison parsers have growing stacks, hitting the upper limit
+Because Bison parsers have growing stacks, hitting the upper limit
usually results from using a right recursion instead of a left
recursion, @xref{Recursion, ,Recursive Rules}.
constant integer. The default is 200.
@c FIXME: C++ output.
-Because of semantical differences between C and C++, the LALR(1) parsers
+Because of semantical differences between C and C++, the
+@acronym{LALR}(1) parsers
in C produced by Bison by compiled as C++ cannot grow. In this precise
case (compiling a C parser as C++) you are suggested to grow
@code{YYINITDEPTH}. In the near future, a C++ output output will be
@cindex error recovery
@cindex recovery from errors
-It is not usually acceptable to have a program terminate on a parse
+It is not usually acceptable to have a program terminate on a syntax
error. For example, a compiler should recover sufficiently to parse the
rest of the input file and check it for errors; a calculator should accept
another expression.
applicable in the ordinary way.
But Bison can force the situation to fit the rule, by discarding part of
-the semantic context and part of the input. First it discards states and
-objects from the stack until it gets back to a state in which the
+the semantic context and part of the input. First it discards states
+and objects from the stack until it gets back to a state in which the
@code{error} token is acceptable. (This means that the subexpressions
-already parsed are discarded, back to the last complete @code{stmnts}.) At
-this point the @code{error} token can be shifted. Then, if the old
+already parsed are discarded, back to the last complete @code{stmnts}.)
+At this point the @code{error} token can be shifted. Then, if the old
look-ahead token is not acceptable to be shifted next, the parser reads
tokens and discards them until it finds a token which is acceptable. In
-this example, Bison reads and discards input until the next newline
-so that the fourth rule can apply.
+this example, Bison reads and discards input until the next newline so
+that the fourth rule can apply. Note that discarded symbols are
+possible sources of memory leaks, see @ref{Destructor Decl, , Freeing
+Discarded Symbols}, for a means to reclaim this memory.
The choice of error rules in the grammar is a choice of strategies for
error recovery. A simple and useful strategy is simply to skip the rest of
this token. Write the statement @samp{yyclearin;} in the error rule's
action.
-For example, suppose that on a parse error, an error handling routine is
+For example, suppose that on a syntax error, an error handling routine is
called that advances the input stream to some point where parsing should
once again commence. The next symbol returned by the lexical scanner is
probably correct. The previous look-ahead token ought to be discarded
name, then this is actually a declaration of @code{x}. How can a Bison
parser for C decide how to parse this input?
-The method used in GNU C is to have two different token types,
+The method used in @acronym{GNU} C is to have two different token types,
@code{IDENTIFIER} and @code{TYPENAME}. When @code{yylex} finds an
identifier, it looks up the current declaration of the identifier in order
to decide which token type to return: @code{TYPENAME} if the identifier is
Bison parsers are @dfn{shift/reduce automata}. In some cases (much more
frequent than one would hope), looking at this automaton is required to
tune or simply fix a parser. Bison provides two different
-representation of it, either textually or graphically (as a @sc{vcg}
+representation of it, either textually or graphically (as a @acronym{VCG}
file).
The textual file is generated when the options @option{--report} or
$accept -> . exp $ (rule 0)
- NUM shift, and go to state 1
+ NUM shift, and go to state 1
- exp go to state 2
+ exp go to state 2
@end example
This reads as follows: ``state 0 corresponds to being at the very
flow jumps to state 2. If there is no such transition on a nonterminal
symbol, and the lookahead is a @code{NUM}, then this token is shifted on
the parse stack, and the control flow jumps to state 1. Any other
-lookahead triggers a parse error.''
+lookahead triggers a syntax error.''
@cindex core, item set
@cindex item set core
exp -> NUM . (rule 5)
- $default reduce using rule 5 (exp)
+ $default reduce using rule 5 (exp)
@end example
@noindent
exp -> exp . '*' exp (rule 3)
exp -> exp . '/' exp (rule 4)
- $ shift, and go to state 3
- '+' shift, and go to state 4
- '-' shift, and go to state 5
- '*' shift, and go to state 6
- '/' shift, and go to state 7
+ $ shift, and go to state 3
+ '+' shift, and go to state 4
+ '-' shift, and go to state 5
+ '*' shift, and go to state 6
+ '/' shift, and go to state 7
@end example
@noindent
@samp{+}, it will be shifted on the parse stack, and the automaton
control will jump to state 4, corresponding to the item @samp{exp -> exp
'+' . exp}. Since there is no default action, any other token than
-those listed above will trigger a parse error.
+those listed above will trigger a syntax error.
The state 3 is named the @dfn{final state}, or the @dfn{accepting
state}:
$accept -> exp $ . (rule 0)
- $default accept
+ $default accept
@end example
@noindent
exp -> exp '+' . exp (rule 1)
- NUM shift, and go to state 1
+ NUM shift, and go to state 1
- exp go to state 8
+ exp go to state 8
state 5
exp -> exp '-' . exp (rule 2)
- NUM shift, and go to state 1
+ NUM shift, and go to state 1
- exp go to state 9
+ exp go to state 9
state 6
exp -> exp '*' . exp (rule 3)
- NUM shift, and go to state 1
+ NUM shift, and go to state 1
- exp go to state 10
+ exp go to state 10
state 7
exp -> exp '/' . exp (rule 4)
- NUM shift, and go to state 1
+ NUM shift, and go to state 1
- exp go to state 11
+ exp go to state 11
@end example
As was announced in beginning of the report, @samp{State 8 contains 1
exp -> exp . '*' exp (rule 3)
exp -> exp . '/' exp (rule 4)
- '*' shift, and go to state 6
- '/' shift, and go to state 7
+ '*' shift, and go to state 6
+ '/' shift, and go to state 7
- '/' [reduce using rule 1 (exp)]
- $default reduce using rule 1 (exp)
+ '/' [reduce using rule 1 (exp)]
+ $default reduce using rule 1 (exp)
@end example
Indeed, there are two actions associated to the lookahead @samp{/}:
NUM)}, which corresponds to shifting @samp{/}, or as @samp{(NUM + NUM) /
NUM}, which corresponds to reducing rule 1.
-Because in LALR(1) parsing a single decision can be made, Bison
+Because in @acronym{LALR}(1) parsing a single decision can be made, Bison
arbitrarily chose to disable the reduction, see @ref{Shift/Reduce, ,
Shift/Reduce Conflicts}. Discarded actions are reported in between
square brackets.
exp -> exp . '*' exp (rule 3)
exp -> exp . '/' exp (rule 4)
- '*' shift, and go to state 6
- '/' shift, and go to state 7
+ '*' shift, and go to state 6
+ '/' shift, and go to state 7
- '/' [reduce using rule 2 (exp)]
- $default reduce using rule 2 (exp)
+ '/' [reduce using rule 2 (exp)]
+ $default reduce using rule 2 (exp)
state 10
exp -> exp '*' exp . (rule 3)
exp -> exp . '/' exp (rule 4)
- '/' shift, and go to state 7
+ '/' shift, and go to state 7
- '/' [reduce using rule 3 (exp)]
- $default reduce using rule 3 (exp)
+ '/' [reduce using rule 3 (exp)]
+ $default reduce using rule 3 (exp)
state 11
exp -> exp . '/' exp (rule 4)
exp -> exp '/' exp . (rule 4)
- '+' shift, and go to state 4
- '-' shift, and go to state 5
- '*' shift, and go to state 6
- '/' shift, and go to state 7
+ '+' shift, and go to state 4
+ '-' shift, and go to state 5
+ '*' shift, and go to state 6
+ '/' shift, and go to state 7
- '+' [reduce using rule 4 (exp)]
- '-' [reduce using rule 4 (exp)]
- '*' [reduce using rule 4 (exp)]
- '/' [reduce using rule 4 (exp)]
- $default reduce using rule 4 (exp)
+ '+' [reduce using rule 4 (exp)]
+ '-' [reduce using rule 4 (exp)]
+ '*' [reduce using rule 4 (exp)]
+ '/' [reduce using rule 4 (exp)]
+ $default reduce using rule 4 (exp)
@end example
@noindent
@item the macro @code{YYDEBUG}
@findex YYDEBUG
Define the macro @code{YYDEBUG} to a nonzero value when you compile the
-parser. This is compliant with POSIX Yacc. You could use
+parser. This is compliant with @acronym{POSIX} Yacc. You could use
@samp{-DYYDEBUG=1} as a compiler option or you could put @samp{#define
YYDEBUG 1} in the prologue of the grammar file (@pxref{Prologue, , The
Prologue}).
@item the option @option{-t}, @option{--debug}
Use the @samp{-t} option when you run Bison (@pxref{Invocation,
-,Invoking Bison}). This is POSIX compliant too.
+,Invoking Bison}). This is @acronym{POSIX} compliant too.
@item the directive @samp{%debug}
@findex %debug
Add the @code{%debug} directive (@pxref{Decl Summary, ,Bison
Declaration Summary}). This is a Bison extension, which will prove
useful when Bison will output parsers for languages that don't use a
-preprocessor. Useless POSIX and Yacc portability matter to you, this is
+preprocessor. Unless @acronym{POSIX} and Yacc portability matter to
+you, this is
the preferred solution.
@end table
yyprint (FILE *file, int type, YYSTYPE value)
@{
if (type == VAR)
- fprintf (file, " %s", value.tptr->name);
+ fprintf (file, "%s", value.tptr->name);
else if (type == NUM)
- fprintf (file, " %d", value.val);
+ fprintf (file, "%d", value.val);
@}
@end smallexample
will produce @file{infile.tab.cxx} and @file{infile.tab.hxx}, and
@example
-bison -d @var{infile.y} -o @var{output.c++}
+bison -d -o @var{output.c++} @var{infile.y}
@end example
@noindent
will produce @file{output.c++} and @file{outfile.h++}.
@menu
* Bison Options:: All the options described in detail,
- in alphabetical order by short options.
+ in alphabetical order by short options.
* Option Cross Key:: Alphabetical list of long options.
-* VMS Invocation:: Bison command syntax on VMS.
@end menu
@node Bison Options
@table @code
@item state
Description of the grammar, conflicts (resolved and unresolved), and
-LALR automaton.
+@acronym{LALR} automaton.
@item lookahead
Implies @code{state} and augments the description of the automaton with
described under the @samp{-v} and @samp{-d} options.
@item -g
-Output a VCG definition of the LALR(1) grammar automaton computed by
-Bison. If the grammar file is @file{foo.y}, the VCG output file will
+Output a @acronym{VCG} definition of the @acronym{LALR}(1) grammar
+automaton computed by Bison. If the grammar file is @file{foo.y}, the
+@acronym{VCG} output file will
be @file{foo.vcg}.
@item --graph=@var{graph-file}
@end example
@end ifinfo
-@node VMS Invocation
-@section Invoking Bison under VMS
-@cindex invoking Bison under VMS
-@cindex VMS
-
-The command line syntax for Bison on VMS is a variant of the usual
-Bison command syntax---adapted to fit VMS conventions.
-
-To find the VMS equivalent for any Bison option, start with the long
-option, and substitute a @samp{/} for the leading @samp{--}, and
-substitute a @samp{_} for each @samp{-} in the name of the long option.
-For example, the following invocation under VMS:
-
-@example
-bison /debug/name_prefix=bar foo.y
-@end example
-
-@noindent
-is equivalent to the following command under POSIX.
-
-@example
-bison --debug --name-prefix=bar foo.y
-@end example
-
-The VMS file system does not permit filenames such as
-@file{foo.tab.c}. In the above example, the output file
-would instead be named @file{foo_tab.c}.
-
@c ================================================= Invoking Bison
@node FAQ
@cindex Bison symbols, table of
@cindex symbols in Bison, table of
-@table @code
-@item @@$
+@deffn {Variable} @@$
In an action, the location of the left-hand side of the rule.
@xref{Locations, , Locations Overview}.
+@end deffn
-@item @@@var{n}
+@deffn {Variable} @@@var{n}
In an action, the location of the @var{n}-th symbol of the right-hand
side of the rule. @xref{Locations, , Locations Overview}.
+@end deffn
-@item $$
+@deffn {Variable} $$
In an action, the semantic value of the left-hand side of the rule.
@xref{Actions}.
+@end deffn
-@item $@var{n}
+@deffn {Variable} $@var{n}
In an action, the semantic value of the @var{n}-th symbol of the
right-hand side of the rule. @xref{Actions}.
+@end deffn
-@item $accept
+@deffn {Symbol} $accept
The predefined nonterminal whose only rule is @samp{$accept: @var{start}
$end}, where @var{start} is the start symbol. @xref{Start Decl, , The
Start-Symbol}. It cannot be used in the grammar.
+@end deffn
-@item $end
+@deffn {Symbol} $end
The predefined token marking the end of the token stream. It cannot be
used in the grammar.
+@end deffn
-@item $undefined
+@deffn {Symbol} $undefined
The predefined token onto which all undefined values returned by
@code{yylex} are mapped. It cannot be used in the grammar, rather, use
@code{error}.
+@end deffn
-@item error
+@deffn {Symbol} error
A token name reserved for error recovery. This token may be used in
grammar rules so as to allow the Bison parser to recognize an error in
the grammar without halting the process. In effect, a sentence
-containing an error may be recognized as valid. On a parse error, the
+containing an error may be recognized as valid. On a syntax error, the
token @code{error} becomes the current look-ahead token. Actions
corresponding to @code{error} are then executed, and the look-ahead
token is reset to the token that originally caused the violation.
@xref{Error Recovery}.
+@end deffn
-@item YYABORT
+@deffn {Macro} YYABORT
Macro to pretend that an unrecoverable syntax error has occurred, by
making @code{yyparse} return 1 immediately. The error reporting
function @code{yyerror} is not called. @xref{Parser Function, ,The
Parser Function @code{yyparse}}.
+@end deffn
-@item YYACCEPT
+@deffn {Macro} YYACCEPT
Macro to pretend that a complete utterance of the language has been
read, by making @code{yyparse} return 0 immediately.
@xref{Parser Function, ,The Parser Function @code{yyparse}}.
+@end deffn
-@item YYBACKUP
+@deffn {Macro} YYBACKUP
Macro to discard a value from the parser stack and fake a look-ahead
token. @xref{Action Features, ,Special Features for Use in Actions}.
+@end deffn
-@item YYDEBUG
+@deffn {Macro} YYDEBUG
Macro to define to equip the parser with tracing code. @xref{Tracing,
,Tracing Your Parser}.
+@end deffn
-@item YYERROR
+@deffn {Macro} YYERROR
Macro to pretend that a syntax error has just been detected: call
@code{yyerror} and then perform normal error recovery if possible
(@pxref{Error Recovery}), or (if recovery is impossible) make
@code{yyparse} return 1. @xref{Error Recovery}.
+@end deffn
-@item YYERROR_VERBOSE
-Macro that you define with @code{#define} in the Bison declarations
-section to request verbose, specific error message strings when
-@code{yyerror} is called.
+@deffn {Macro} YYERROR_VERBOSE
+An obsolete macro that you define with @code{#define} in the Bison
+declarations section to request verbose, specific error message strings
+when @code{yyerror} is called. It doesn't matter what definition you
+use for @code{YYERROR_VERBOSE}, just whether you define it. Using
+@code{%error-verbose} is preferred.
+@end deffn
-@item YYINITDEPTH
+@deffn {Macro} YYINITDEPTH
Macro for specifying the initial size of the parser stack.
@xref{Stack Overflow}.
+@end deffn
-@item YYLEX_PARAM
-Macro for specifying an extra argument (or list of extra arguments) for
-@code{yyparse} to pass to @code{yylex}. @xref{Pure Calling,, Calling
-Conventions for Pure Parsers}.
+@deffn {Macro} YYLEX_PARAM
+An obsolete macro for specifying an extra argument (or list of extra
+arguments) for @code{yyparse} to pass to @code{yylex}. he use of this
+macro is deprecated, and is supported only for Yacc like parsers.
+@xref{Pure Calling,, Calling Conventions for Pure Parsers}.
+@end deffn
-@item YYLTYPE
+@deffn {Macro} YYLTYPE
Macro for the data type of @code{yylloc}; a structure with four
members. @xref{Location Type, , Data Types of Locations}.
+@end deffn
-@item yyltype
+@deffn {Type} yyltype
Default value for YYLTYPE.
+@end deffn
-@item YYMAXDEPTH
-Macro for specifying the maximum size of the parser stack.
-@xref{Stack Overflow}.
+@deffn {Macro} YYMAXDEPTH
+Macro for specifying the maximum size of the parser stack. @xref{Stack
+Overflow}.
+@end deffn
-@item YYPARSE_PARAM
-Macro for specifying the name of a parameter that @code{yyparse} should
-accept. @xref{Pure Calling,, Calling Conventions for Pure Parsers}.
+@deffn {Macro} YYPARSE_PARAM
+An obsolete macro for specifying the name of a parameter that
+@code{yyparse} should accept. The use of this macro is deprecated, and
+is supported only for Yacc like parsers. @xref{Pure Calling,, Calling
+Conventions for Pure Parsers}.
+@end deffn
-@item YYRECOVERING
+@deffn {Macro} YYRECOVERING
Macro whose value indicates whether the parser is recovering from a
syntax error. @xref{Action Features, ,Special Features for Use in Actions}.
+@end deffn
-@item YYSTACK_USE_ALLOCA
+@deffn {Macro} YYSTACK_USE_ALLOCA
Macro used to control the use of @code{alloca}. If defined to @samp{0},
the parser will not use @code{alloca} but @code{malloc} when trying to
grow its internal stacks. Do @emph{not} define @code{YYSTACK_USE_ALLOCA}
to anything else.
+@end deffn
-@item YYSTYPE
+@deffn {Macro} YYSTYPE
Macro for the data type of semantic values; @code{int} by default.
@xref{Value Type, ,Data Types of Semantic Values}.
+@end deffn
-@item yychar
+@deffn {Variable} yychar
External integer variable that contains the integer value of the current
look-ahead token. (In a pure parser, it is a local variable within
@code{yyparse}.) Error-recovery rule actions may examine this variable.
@xref{Action Features, ,Special Features for Use in Actions}.
+@end deffn
-@item yyclearin
+@deffn {Variable} yyclearin
Macro used in error-recovery rule actions. It clears the previous
look-ahead token. @xref{Error Recovery}.
+@end deffn
-@item yydebug
+@deffn {Variable} yydebug
External integer variable set to zero by default. If @code{yydebug}
is given a nonzero value, the parser will output information on input
symbols and parser action. @xref{Tracing, ,Tracing Your Parser}.
+@end deffn
-@item yyerrok
+@deffn {Macro} yyerrok
Macro to cause parser to recover immediately to its normal mode
-after a parse error. @xref{Error Recovery}.
+after a syntax error. @xref{Error Recovery}.
+@end deffn
-@item yyerror
+@deffn {Function} yyerror
User-supplied function to be called by @code{yyparse} on error. The
function receives one argument, a pointer to a character string
containing an error message. @xref{Error Reporting, ,The Error
Reporting Function @code{yyerror}}.
+@end deffn
-@item yylex
+@deffn {Function} yylex
User-supplied lexical analyzer function, called with no arguments to get
the next token. @xref{Lexical, ,The Lexical Analyzer Function
@code{yylex}}.
+@end deffn
-@item yylval
+@deffn {Variable} yylval
External variable in which @code{yylex} should place the semantic
value associated with a token. (In a pure parser, it is a local
variable within @code{yyparse}, and its address is passed to
@code{yylex}.) @xref{Token Values, ,Semantic Values of Tokens}.
+@end deffn
-@item yylloc
+@deffn {Variable} yylloc
External variable in which @code{yylex} should place the line and column
numbers associated with a token. (In a pure parser, it is a local
variable within @code{yyparse}, and its address is passed to
@code{yylex}.) You can ignore this variable if you don't use the
@samp{@@} feature in the grammar actions. @xref{Token Positions,
,Textual Positions of Tokens}.
+@end deffn
-@item yynerrs
-Global variable which Bison increments each time there is a parse error.
+@deffn {Variable} yynerrs
+Global variable which Bison increments each time there is a syntax error.
(In a pure parser, it is a local variable within @code{yyparse}.)
@xref{Error Reporting, ,The Error Reporting Function @code{yyerror}}.
+@end deffn
-@item yyparse
+@deffn {Function} yyparse
The parser function produced by Bison; call this function to start
parsing. @xref{Parser Function, ,The Parser Function @code{yyparse}}.
+@end deffn
-@item %debug
+@deffn {Directive} %debug
Equip the parser for debugging. @xref{Decl Summary}.
+@end deffn
-@item %defines
+@deffn {Directive} %defines
Bison declaration to create a header file meant for the scanner.
@xref{Decl Summary}.
+@end deffn
+
+@deffn {Directive} %destructor
+Specifying how the parser should reclaim the memory associated to
+discarded symbols. @xref{Destructor Decl, , Freeing Discarded Symbols}.
+@end deffn
-@item %dprec
+@deffn {Directive} %dprec
Bison declaration to assign a precedence to a rule that is used at parse
-time to resolve reduce/reduce conflicts. @xref{GLR Parsers}.
+time to resolve reduce/reduce conflicts. @xref{GLR Parsers, ,Writing
+@acronym{GLR} Parsers}.
+@end deffn
+
+@deffn {Directive} %error-verbose
+Bison declaration to request verbose, specific error message strings
+when @code{yyerror} is called.
+@end deffn
-@item %file-prefix="@var{prefix}"
+@deffn {Directive} %file-prefix="@var{prefix}"
Bison declaration to set the prefix of the output files. @xref{Decl
Summary}.
+@end deffn
-@item %glr-parser
-Bison declaration to produce a GLR parser. @xref{GLR Parsers}.
+@deffn {Directive} %glr-parser
+Bison declaration to produce a @acronym{GLR} parser. @xref{GLR
+Parsers, ,Writing @acronym{GLR} Parsers}.
+@end deffn
-@c @item %source-extension
-@c Bison declaration to specify the generated parser output file extension.
-@c @xref{Decl Summary}.
-@c
-@c @item %header-extension
-@c Bison declaration to specify the generated parser header file extension
-@c if required. @xref{Decl Summary}.
-
-@item %left
+@deffn {Directive} %left
Bison declaration to assign left associativity to token(s).
@xref{Precedence Decl, ,Operator Precedence}.
+@end deffn
+
+@deffn {Directive} %lex-param @{@var{argument-declaration}@}. @{@var{argument-name}"@}
+Bison declaration to specifying an additional parameter that
+@code{yylex} should accept. @xref{Pure Calling,, Calling Conventions
+for Pure Parsers}.
+@end deffn
-@item %merge
+@deffn {Directive} %merge
Bison declaration to assign a merging function to a rule. If there is a
reduce/reduce conflict with a rule having the same merging function, the
function is applied to the two semantic values to get a single result.
-@xref{GLR Parsers}.
+@xref{GLR Parsers, ,Writing @acronym{GLR} Parsers}.
+@end deffn
-@item %name-prefix="@var{prefix}"
+@deffn {Directive} %name-prefix="@var{prefix}"
Bison declaration to rename the external symbols. @xref{Decl Summary}.
+@end deffn
-@item %no-lines
+@deffn {Directive} %no-lines
Bison declaration to avoid generating @code{#line} directives in the
parser file. @xref{Decl Summary}.
+@end deffn
-@item %nonassoc
+@deffn {Directive} %nonassoc
Bison declaration to assign non-associativity to token(s).
@xref{Precedence Decl, ,Operator Precedence}.
+@end deffn
-@item %output="@var{filename}"
+@deffn {Directive} %output="@var{filename}"
Bison declaration to set the name of the parser file. @xref{Decl
Summary}.
+@end deffn
+
+@deffn {Directive} %parse-param @{@var{argument-declaration}@}, @{@var{argument-name}@}
+Bison declaration to specifying an additional parameter that
+@code{yyparse} should accept. @xref{Parser Function,, The Parser
+Function @code{yyparse}}.
+@end deffn
-@item %prec
+@deffn {Directive} %prec
Bison declaration to assign a precedence to a specific rule.
@xref{Contextual Precedence, ,Context-Dependent Precedence}.
+@end deffn
-@item %pure-parser
+@deffn {Directive} %pure-parser
Bison declaration to request a pure (reentrant) parser.
@xref{Pure Decl, ,A Pure (Reentrant) Parser}.
+@end deffn
-@item %right
+@deffn {Directive} %right
Bison declaration to assign right associativity to token(s).
@xref{Precedence Decl, ,Operator Precedence}.
+@end deffn
-@item %start
+@deffn {Directive} %start
Bison declaration to specify the start symbol. @xref{Start Decl, ,The
Start-Symbol}.
+@end deffn
-@item %token
+@deffn {Directive} %token
Bison declaration to declare token(s) without specifying precedence.
@xref{Token Decl, ,Token Type Names}.
+@end deffn
-@item %token-table
+@deffn {Directive} %token-table
Bison declaration to include a token name table in the parser file.
@xref{Decl Summary}.
+@end deffn
-@item %type
+@deffn {Directive} %type
Bison declaration to declare nonterminals. @xref{Type Decl,
,Nonterminal Symbols}.
+@end deffn
-@item %union
+@deffn {Directive} %union
Bison declaration to specify several possible data types for semantic
values. @xref{Union Decl, ,The Collection of Value Types}.
-@end table
+@end deffn
@sp 1
These are the punctuation and delimiters used in Bison input:
-@table @samp
-@item %%
+@deffn {Delimiter} %%
Delimiter used to separate the grammar rule section from the
Bison declarations section or the epilogue.
@xref{Grammar Layout, ,The Overall Layout of a Bison Grammar}.
+@end deffn
-@item %@{ %@}
+@c Don't insert spaces, or check the DVI output.
+@deffn {Delimiter} %@{@var{code}%@}
All code listed between @samp{%@{} and @samp{%@}} is copied directly to
the output file uninterpreted. Such code forms the prologue of the input
file. @xref{Grammar Outline, ,Outline of a Bison
Grammar}.
+@end deffn
-@item /*@dots{}*/
+@deffn {Construct} /*@dots{}*/
Comment delimiters, as in C.
+@end deffn
-@item :
+@deffn {Delimiter} :
Separates a rule's result from its components. @xref{Rules, ,Syntax of
Grammar Rules}.
+@end deffn
-@item ;
+@deffn {Delimiter} ;
Terminates a rule. @xref{Rules, ,Syntax of Grammar Rules}.
+@end deffn
-@item |
+@deffn {Delimiter} |
Separates alternate rules for the same result nonterminal.
@xref{Rules, ,Syntax of Grammar Rules}.
-@end table
+@end deffn
@node Glossary
@appendix Glossary
@cindex glossary
@table @asis
-@item Backus-Naur Form (BNF)
-Formal method of specifying context-free grammars. BNF was first used
-in the @cite{ALGOL-60} report, 1963. @xref{Language and Grammar,
-,Languages and Context-Free Grammars}.
+@item Backus-Naur Form (@acronym{BNF}; also called ``Backus Normal Form'')
+Formal method of specifying context-free grammars originally proposed
+by John Backus, and slightly improved by Peter Naur in his 1960-01-02
+committee document contributing to what became the Algol 60 report.
+@xref{Language and Grammar, ,Languages and Context-Free Grammars}.
@item Context-free grammars
Grammars specified as rules that can be applied regardless of context.
machine moves from state to state as specified by the logic of the
machine. In the case of the parser, the input is the language being
parsed, and the states correspond to various stages in the grammar
-rules. @xref{Algorithm, ,The Bison Parser Algorithm }.
+rules. @xref{Algorithm, ,The Bison Parser Algorithm}.
-@item Generalized LR (GLR)
+@item Generalized @acronym{LR} (@acronym{GLR})
A parsing algorithm that can handle all context-free grammars, including those
-that are not LALR(1). It resolves situations that Bison's usual LALR(1)
+that are not @acronym{LALR}(1). It resolves situations that Bison's
+usual @acronym{LALR}(1)
algorithm cannot by effectively splitting off multiple parsers, trying all
possible parsers, and discarding those that fail in the light of additional
-right context. @xref{Generalized LR Parsing, ,Generalized LR Parsing}.
+right context. @xref{Generalized LR Parsing, ,Generalized
+@acronym{LR} Parsing}.
@item Grouping
A language construct that is (in general) grammatically divisible;
-for example, `expression' or `declaration' in C.
+for example, `expression' or `declaration' in C@.
@xref{Language and Grammar, ,Languages and Context-Free Grammars}.
@item Infix operator
@item Left-to-right parsing
Parsing a sentence of a language by analyzing it token by token from
-left to right. @xref{Algorithm, ,The Bison Parser Algorithm }.
+left to right. @xref{Algorithm, ,The Bison Parser Algorithm}.
@item Lexical analyzer (scanner)
A function that reads an input stream and returns tokens one by one.
A token already read but not yet shifted. @xref{Look-Ahead, ,Look-Ahead
Tokens}.
-@item LALR(1)
+@item @acronym{LALR}(1)
The class of context-free grammars that Bison (like most other parser
-generators) can handle; a subset of LR(1). @xref{Mystery Conflicts, ,
-Mysterious Reduce/Reduce Conflicts}.
+generators) can handle; a subset of @acronym{LR}(1). @xref{Mystery
+Conflicts, ,Mysterious Reduce/Reduce Conflicts}.
-@item LR(1)
+@item @acronym{LR}(1)
The class of context-free grammars in which at most one token of
look-ahead is needed to disambiguate the parsing of any piece of input.
be expressed through rules in terms of smaller constructs; in other
words, a construct that is not a token. @xref{Symbols}.
-@item Parse error
-An error encountered during parsing of an input stream due to invalid
-syntax. @xref{Error Recovery}.
-
@item Parser
A function that recognizes valid sentences of a language by analyzing
the syntax structure of a set of tokens passed to it from a lexical
@item Reduction
Replacing a string of nonterminals and/or terminals with a single
nonterminal, according to a grammar rule. @xref{Algorithm, ,The Bison
-Parser Algorithm }.
+Parser Algorithm}.
@item Reentrant
A reentrant subprogram is a subprogram which can be in invoked any
@item Shift
A parser is said to shift when it makes the choice of analyzing
further input from the stream rather than reducing immediately some
-already-recognized rule. @xref{Algorithm, ,The Bison Parser Algorithm }.
+already-recognized rule. @xref{Algorithm, ,The Bison Parser Algorithm}.
@item Single-character literal
A single character that is recognized and interpreted as is.
during parsing to allow for recognition and use of existing
information in repeated uses of a symbol. @xref{Multi-function Calc}.
+@item Syntax error
+An error encountered during parsing of an input stream due to invalid
+syntax. @xref{Error Recovery}.
+
@item Token
A basic, grammatically indivisible unit of a language. The symbol
that describes a token in the grammar is a terminal symbol.