+* Short term
+** Use syntax_error from the scanner?
+This would provide a means to raise syntax error from function called
+from the scanner. Actually, there is no good solution to report a
+lexical error in general. Usually they are kept at the scanner level
+only, ignoring the guilty token. But that might not be the best bet,
+since we don't benefit from the syntactic error recovery.
+
+We still have the possibility to return an invalid token number, which
+does the trick. But then the error message from the parser is poor
+(something like "unexpected $undefined"). Since the scanner probably
+already reported the error, we should directly enter error-recovery,
+without reporting the error message (i.e., YYERROR's semantics).
+
+Back to lalr1.cc (whose name is now quite unfortunate, since it also
+covers lr and ielr), if we support exceptions from yylex, should we
+propose a lexical_error in addition to syntax_error? Should they have
+a common root, say parse_error? Should syntax_error be renamed
+syntactic_error for consistency with lexical_error?
+
+** Variable names.
+What should we name `variant' and `lex_symbol'?
+
+** Use b4_symbol in all the skeleton
+Then remove the older system, including the tables generated by
+output.c
+
+** Update the documentation on gnu.org
+
+** Get rid of fake #lines [Bison: ...]
+Possibly as simple as checking whether the column number is nonnegative.
+
+I have seen messages like the following from GCC.
+
+<built-in>:0: fatal error: opening dependency file .deps/libltdl/argz.Tpo: No such file or directory
+
+
+** Discuss about %printer/%destroy in the case of C++.
+It would be very nice to provide the symbol classes with an operator<<
+and a destructor. Unfortunately the syntax we have chosen for
+%destroy and %printer make them hard to reuse. For instance, the user
+is invited to write something like
+
+ %printer { debug_stream() << $$; } <my_type>;
+
+which is hard to reuse elsewhere since it wants to use
+"debug_stream()" to find the stream to use. The same applies to
+%destroy: we told the user she could use the members of the Parser
+class in the printers/destructors, which is not good for an operator<<
+since it is no longer bound to a particular parser, it's just a
+(standalone symbol).
+
+** Rename LR0.cc
+as lr0.cc, why upper case?
+
+** bench several bisons.
+Enhance bench.pl with %b to run different bisons.
+
+** Use b4_symbol everywhere.
+Move its definition in the more standard places and deploy it in other
+skeletons.
+
+* Various
+** YYPRINT
+glr.c inherits its symbol_print function from c.m4, which supports
+YYPRINT. But to use YYPRINT yytoknum is needed, which not defined by
+glr.c.
+
+Anyway, IMHO YYPRINT is obsolete and should be restricted to yacc.c.
+
+** YYERRCODE
+Defined to 256, but not used, not documented. Probably the token
+number for the error token, which POSIX wants to be 256, but which
+Bison might renumber if the user used number 256. Keep fix and doc?
+Throw away?
+
+Also, why don't we output the token name of the error token in the
+output? It is explicitly skipped:
+
+ /* Skip error token and tokens without identifier. */
+ if (sym != errtoken && id)
+
+Of course there are issues with name spaces, but if we disable we have
+something which seems to be more simpler and more consistent instead
+of the special case YYERRCODE.
+
+ enum yytokentype {
+ error = 256,
+ // ...
+ };
+
+
+We could (should?) also treat the case of the undef_token, which is
+numbered 257 for yylex, and 2 internal. Both appear for instance in
+toknum:
+
+ const unsigned short int
+ parser::yytoken_number_[] =
+ {
+ 0, 256, 257, 258, 259, 260, 261, 262, 263, 264,
+
+while here
+
+ enum yytokentype {
+ TOK_EOF = 0,
+ TOK_EQ = 258,
+
+so both 256 and 257 are "mysterious".
+
+ const char*
+ const parser::yytname_[] =
+ {
+ "\"end of command\"", "error", "$undefined", "\"=\"", "\"break\"",
+
+
+** YYFAIL
+It is seems to be *really* obsolete now, shall we remove it?
+
+** YYBACKUP
+There is no test about it, no examples in the doc, and I'm not sure
+what it should look like. For instance what follows crashes.
+
+ %error-verbose
+ %debug
+ %pure-parser
+ %code {
+ # include <stdio.h>
+ # include <stdlib.h>
+ # include <assert.h>
+
+ static void yyerror (const char *msg);
+ static int yylex (YYSTYPE *yylval);
+ }
+ %%
+ exp:
+ 'a' { printf ("a: %d\n", $1); }
+ | 'b' { YYBACKUP('a', 123); }
+ ;
+ %%
+ static int
+ yylex (YYSTYPE *yylval)
+ {
+ static char const input[] = "b";
+ static size_t toknum;
+ assert (toknum < sizeof input);
+ *yylval = (toknum + 1) * 10;
+ return input[toknum++];
+ }
+
+ static void
+ yyerror (const char *msg)
+ {
+ fprintf (stderr, "%s\n", msg);
+ }
+
+ int
+ main (void)
+ {
+ yydebug = !!getenv("YYDEBUG");
+ return yyparse ();
+ }
+
+** yychar == yyempty_
+The code in yyerrlab reads:
+
+ if (yychar <= YYEOF)
+ {
+ /* Return failure if at end of input. */
+ if (yychar == YYEOF)
+ YYABORT;
+ }
+
+There are only two yychar that can be <= YYEOF: YYEMPTY and YYEOF.
+But I can't produce the situation where yychar is YYEMPTY here, is it
+really possible? The test suite does not exercise this case.
+
+This shows that it would be interesting to manage to install skeleton
+coverage analysis to the test suite.
+
+** Table definitions
+It should be very easy to factor the definition of the various tables,
+including the separation bw declaration and definition. See for
+instance b4_table_define in lalr1.cc. This way, we could even factor
+C vs. C++ definitions.
+
+* From lalr1.cc to yacc.c
+** Single stack
+Merging the three stacks in lalr1.cc simplified the code, prompted for
+other improvements and also made it faster (probably because memory
+management is performed once instead of three times). I suggest that
+we do the same in yacc.c.
+
+** yysyntax_error
+The code bw glr.c and yacc.c is really alike, we can certainly factor
+some parts.
+
+* Header guards
+
+From Franc,ois: should we keep the directory part in the CPP guard?
+
+
+* Yacc.c: CPP Macros
+
+Do some people use YYPURE, YYLSP_NEEDED like we do in the test suite?
+They should not: it is not documented. But if they need to, let's
+find something clean (not like YYLSP_NEEDED...).
+
+
+* Installation
+
+* Documentation
+Before releasing, make sure the documentation ("Understanding your
+parser") refers to the current `output' format.
+
+* Report
+
+** Figures
+Some statistics about the grammar and the parser would be useful,
+especially when asking the user to send some information about the
+grammars she is working on. We should probably also include some
+information about the variables (I'm not sure for instance we even
+specify what LR variant was used).
+
+** GLR
+How would Paul like to display the conflicted actions? In particular,
+what when two reductions are possible on a given lookahead token, but one is
+part of $default. Should we make the two reductions explicit, or just
+keep $default? See the following point.
+
+** Disabled Reductions
+See `tests/conflicts.at (Defaulted Conflicted Reduction)', and decide
+what we want to do.
+
+** Documentation
+Extend with error productions. The hard part will probably be finding
+the right rule so that a single state does not exhibit too many yet
+undocumented ``features''. Maybe an empty action ought to be
+presented too. Shall we try to make a single grammar with all these
+features, or should we have several very small grammars?
+
+** --report=conflict-path
+Provide better assistance for understanding the conflicts by providing
+a sample text exhibiting the (LALR) ambiguity. See the paper from
+DeRemer and Penello: they already provide the algorithm.
+
+** Statically check for potential ambiguities in GLR grammars. See
+<http://www.i3s.unice.fr/~schmitz/papers.html#expamb> for an approach.
+
+
+* Extensions
+
+** Labeling the symbols
+Have a look at the Lemon parser generator: instead of $1, $2 etc. they
+can name the values. This is much more pleasant. For instance:
+
+ exp (res): exp (a) '+' exp (b) { $res = $a + $b; };
+
+I love this. I have been bitten too often by the removal of the
+symbol, and forgetting to shift all the $n to $n-1. If you are
+unlucky, it compiles...
+
+But instead of using $a etc., we can use regular variables. And
+instead of using (), I propose to use `:' (again). Paul suggests
+supporting `->' in addition to `:' to separate LHS and RHS. In other
+words:
+
+ r:exp -> a:exp '+' b:exp { r = a + b; };
projects / bison.git / blobdiff