-# Makefile for bison
-# Copyright (C) 1988, 1989, 1991, 1993 Bob Corbett and Free Software Foundation, Inc.
-#
-# This file is part of Bison, the GNU Compiler Compiler.
-#
-# Bison is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# Bison is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with Bison; see the file COPYING. If not, write to
-# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
-#### Start of system configuration section. ####
+# Makefile.in generated automatically by automake 1.5 from Makefile.am.
-srcdir = @srcdir@
-VPATH = @srcdir@
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
-CC = @CC@
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_DATA = @INSTALL_DATA@
-MAKEINFO = makeinfo
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
-# Things you might add to DEFS:
-# -DSTDC_HEADERS If you have ANSI C headers and libraries.
-# -DHAVE_STRING_H If you don't have ANSI C headers but have string.h.
-# -DHAVE_MEMORY_H If you don't have ANSI C headers and have memory.h.
-# -DHAVE_STRERROR If you have strerror function.
-DEFS = @DEFS@
+@SET_MAKE@
-CFLAGS = -g
-LDFLAGS =
-
-LIBS = @LIBS@
-
-# Some System V machines do not come with libPW. If this is true, use
-# the GNU alloca.o here.
-ALLOCA = @ALLOCA@
+SHELL = @SHELL@
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@
-# where the installed binary goes
-bindir = $(exec_prefix)/bin
-
-# where the parsers go
-datadir = $(prefix)/share
-
-# where the info files go
-infodir = $(prefix)/info
-
-# where manual pages go and what their extensions should be
-mandir = $(prefix)/man/man$(manext)
-manext = 1
-
-#### End of system configuration section. ####
-
-DISTFILES = COPYING ChangeLog Makefile.in configure configure.in \
- REFERENCES bison.1 bison.rnh configure.bat \
- bison.simple bison.hairy \
- LR0.c allocate.c closure.c conflicts.c derives.c \
- files.c getargs.c gram.c lalr.c lex.c main.c nullable.c \
- output.c print.c reader.c reduce.c symtab.c version.c \
- warshall.c files.h gram.h lex.h machine.h new.h state.h \
- symtab.h system.h types.h bison.cld build.com vmsgetargs.c \
- vmshlp.mar README INSTALL NEWS bison.texinfo bison.info* texinfo.tex \
- getopt.c getopt.h getopt1.c alloca.c mkinstalldirs install-sh
-
-
-SHELL = /bin/sh
-
-# This rule allows us to supply the necessary -D options
-# in addition to whatever the user asks for.
-.c.o:
- $(CC) -c $(DEFS) -I$(srcdir)/../include $(CPPFLAGS) $(CFLAGS) $<
-
-# names of parser files
-PFILE = bison.simple
-PFILE1 = bison.hairy
-
-PFILES = -DXPFILE=\"$(datadir)/$(PFILE)\" \
- -DXPFILE1=\"$(datadir)/$(PFILE1)\"
-
-OBJECTS = LR0.o allocate.o closure.o conflicts.o derives.o files.o \
- getargs.o gram.o lalr.o lex.o \
- main.o nullable.o output.o print.o reader.o reduce.o symtab.o \
- warshall.o version.o \
- getopt.o getopt1.o $(ALLOCA)
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = .
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
-all: bison bison.info bison.s1
-
-Makefile: Makefile.in config.status
- ./config.status
-
-config.status: configure
- ./config.status --recheck
-
-configure: configure.in
- cd $(srcdir); autoconf
-
-# Copy bison.simple, inserting directory name into the #line commands.
-bison.s1: bison.simple
- -rm -f bison.s1
- sed -e "/^#line/ s|bison|$(datadir)/bison|" < $(srcdir)/$(PFILE) > bison.s1
-
-clean:
- rm -f *.o core bison bison.s1
-
-mostlyclean: clean
-
-distclean: clean
- rm -f Makefile config.status
-
-realclean: distclean
- rm -f TAGS *.info*
-
-# Most of these deps are in case using RCS.
-install: all bison.1 $(srcdir)/$(PFILE) $(srcdir)/$(PFILE1) installdirs uninstall
- $(INSTALL_PROGRAM) bison $(bindir)/bison
- $(INSTALL_DATA) bison.s1 $(datadir)/$(PFILE)
- $(INSTALL_DATA) $(srcdir)/$(PFILE1) $(datadir)/$(PFILE1)
- cd $(srcdir); for f in bison.info*; \
- do $(INSTALL_DATA) $$f $(infodir)/$$f; done
- -$(INSTALL_DATA) $(srcdir)/bison.1 $(mandir)/bison.$(manext)
-
-# Make sure all installation directories, e.g. $(bindir) actually exist by
-# making them if necessary.
-installdirs:
- -sh $(srcdir)/mkinstalldirs $(bindir) $(datadir) $(libdir) $(infodir) $(mandir)
-
-uninstall:
- rm -f $(bindir)/bison
- -cd $(datadir); rm -f $(PFILE) $(PFILE1)
- rm -f $(mandir)/bison.$(manext) $(infodir)/bison.info*
-
-check:
- @echo "No checks implemented (yet)."
-
-bison: $(OBJECTS)
- $(CC) $(LDFLAGS) $(CFLAGS) -o $@ $(OBJECTS) $(LIBS)
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = @program_transform_name@
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_alias = @host_alias@
+host_triplet = @host@
+AMTAR = @AMTAR@
+AT_TESTPATH = @AT_TESTPATH@
+AWK = @AWK@
+BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
+CATALOGS = @CATALOGS@
+CATOBJEXT = @CATOBJEXT@
+CC = @CC@
+CPP = @CPP@
+DATADIRNAME = @DATADIRNAME@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EXEEXT = @EXEEXT@
+GENCAT = @GENCAT@
+GLIBC21 = @GLIBC21@
+GMOFILES = @GMOFILES@
+GMSGFMT = @GMSGFMT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INSTOBJEXT = @INSTOBJEXT@
+INTLBISON = @INTLBISON@
+INTLLIBS = @INTLLIBS@
+INTLOBJS = @INTLOBJS@
+INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@
+LIBICONV = @LIBICONV@
+LIBOBJS = @LIBOBJS@
+M4 = @M4@
+MKINSTALLDIRS = @MKINSTALLDIRS@
+MSGFMT = @MSGFMT@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+POFILES = @POFILES@
+POSUB = @POSUB@
+RANLIB = @RANLIB@
+U = @U@
+USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+WARNING_CFLAGS = @WARNING_CFLAGS@
+am__include = @am__include@
+am__quote = @am__quote@
+install_sh = @install_sh@
+
+AUTOMAKE_OPTIONS = 1.5 check-news readme-alpha
+
+ACLOCAL_AMFLAGS = -I m4
+
+SUBDIRS = config intl po lib src doc m4 tests
+
+EXTRA_DIST = REFERENCES configure.bat OChangeLog Makefile.maint GNUmakefile
+
+DISTCLEANFILES = intl/libintl.h
+
+move_if_change = $(srcdir)/config/move-if-change
+prev_version_file = $(srcdir)/config/prev-version.txt
+release_archive_dir = releases
+
+# Uploading betas.
+hosts = alpha
+alpha_host = alpha.gnu.org
+alpha_url_dir = gnu/bison
+
+# Files to update automatically.
+wget_files = $(srcdir)/config/config.guess $(srcdir)/config/config.sub \
+ $(srcdir)/config/texinfo.tex
+
+subdir = .
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES = intl/Makefile
+DIST_SOURCES =
+
+RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \
+ uninstall-info-recursive all-recursive install-data-recursive \
+ install-exec-recursive installdirs-recursive install-recursive \
+ uninstall-recursive check-recursive installcheck-recursive
+DIST_COMMON = README ./stamp-h.in ABOUT-NLS AUTHORS COPYING ChangeLog \
+ INSTALL Makefile.am Makefile.in NEWS README-alpha THANKS \
+ aclocal.m4 config.hin configure configure.in missing \
+ mkinstalldirs
+DIST_SUBDIRS = $(SUBDIRS)
+all: config.h
+ $(MAKE) $(AM_MAKEFLAGS) all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --gnu Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ cd $(top_builddir) && \
+ CONFIG_HEADERS= CONFIG_LINKS= \
+ CONFIG_FILES=$@ $(SHELL) ./config.status
+
+$(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ $(SHELL) ./config.status --recheck
+$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
+ cd $(srcdir) && $(AUTOCONF)
+
+$(ACLOCAL_M4): configure.in m4/atconfig.m4 m4/c-bs-a.m4 m4/codeset.m4 m4/error.m4 m4/gettext.m4 m4/glibc21.m4 m4/iconv.m4 m4/isc-posix.m4 m4/lcmessage.m4 m4/m4.m4 m4/malloc.m4 m4/mbstate_t.m4 m4/prereq.m4 m4/progtest.m4 m4/realloc.m4 m4/strerror_r.m4 m4/warning.m4
+ cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+config.h: stamp-h
+ @if test ! -f $@; then \
+ rm -f stamp-h; \
+ $(MAKE) stamp-h; \
+ else :; fi
+stamp-h: $(srcdir)/config.hin $(top_builddir)/config.status
+ @rm -f stamp-h stamp-hT
+ @echo timestamp > stamp-hT 2> /dev/null
+ cd $(top_builddir) \
+ && CONFIG_FILES= CONFIG_HEADERS=config.h:config.hin \
+ $(SHELL) ./config.status
+ @mv stamp-hT stamp-h
+$(srcdir)/config.hin: $(srcdir)/./stamp-h.in
+ @if test ! -f $@; then \
+ rm -f $(srcdir)/./stamp-h.in; \
+ $(MAKE) $(srcdir)/./stamp-h.in; \
+ else :; fi
+$(srcdir)/./stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4)
+ @rm -f $(srcdir)/./stamp-h.in $(srcdir)/./stamp-h.inT
+ @echo timestamp > $(srcdir)/./stamp-h.inT 2> /dev/null
+ cd $(top_srcdir) && $(AUTOHEADER)
+ @mv $(srcdir)/./stamp-h.inT $(srcdir)/./stamp-h.in
+
+distclean-hdr:
+ -rm -f config.h
+intl/Makefile: $(top_builddir)/config.status $(top_srcdir)/intl/Makefile.in
+ cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= CONFIG_LINKS= $(SHELL) ./config.status
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @set fnord $(MAKEFLAGS); amf=$$2; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @set fnord $(MAKEFLAGS); amf=$$2; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ done
-# We don't use $(srcdir) in this rule
-# because it is normally used in the master source dir
-# in which configure has not been run.
-dist: bison.info
- echo bison-`sed -e '/version_string/!d' -e 's/[^0-9.]*\([0-9.]*\).*/\1/' -e q version.c` > .fname
- -rm -rf `cat .fname`
- mkdir `cat .fname`
- dst=`cat .fname`; for f in $(DISTFILES); do \
- ln $$f $$dst/$$f || { echo copying $$f; cp -p $$f $$dst/$$f ; } \
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique $(LISP)
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) config.hin $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(ETAGS_ARGS)config.hin$$unique$(LISP)$$tags" \
+ || etags $(ETAGS_ARGS) $$tags config.hin $$unique $(LISP)
+
+GTAGS:
+ here=`CDPATH=: && cd $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
+
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = .
+# Avoid unsightly `./'.
+distdir = $(PACKAGE)-$(VERSION)
+
+GZIP_ENV = --best
+
+distdir: $(DISTFILES)
+ @if sed 15q $(srcdir)/NEWS | fgrep -e "$(VERSION)" >/dev/null; \
+ then :; else \
+ echo "NEWS not updated; not releasing" 1>&2; \
+ exit 1; \
+ fi
+ -chmod -R a+w $(distdir) >/dev/null 2>&1; rm -rf $(distdir)
+ mkdir $(distdir)
+ $(mkinstalldirs) $(distdir)/intl $(distdir)/po $(distdir)/tests
+ @for file in $(DISTFILES); do \
+ if test -f $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ $(mkinstalldirs) "$(distdir)/$$dir"; \
+ fi; \
+ if test -d $$d/$$file; then \
+ cp -pR $$d/$$file $(distdir) \
+ || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
done
- tar --gzip -chf `cat .fname`.tar.gz `cat .fname`
- -rm -rf `cat .fname` .fname
-
-bison.info: bison.texinfo
- $(MAKEINFO) $(srcdir)/bison.texinfo
-
-TAGS: *.c *.h
- etags *.c *.h
-
-# This file is different to pass the parser file names to the compiler.
-files.o: files.c
- $(CC) -c $(PFILES) $(DEFS) $(CPPFLAGS) $(CFLAGS) \
- $(srcdir)/files.c $(OUTPUT_OPTION)
-
-LR0.o: system.h machine.h new.h gram.h state.h
-closure.o: system.h machine.h new.h gram.h
-conflicts.o: system.h machine.h new.h files.h gram.h state.h
-derives.o: system.h new.h types.h gram.h
-files.o: system.h files.h new.h gram.h
-getargs.o: system.h files.h
-lalr.o: system.h machine.h types.h state.h new.h gram.h
-lex.o: system.h files.h symtab.h lex.h
-main.o: system.h machine.h
-nullable.o: system.h types.h gram.h new.h
-output.o: system.h machine.h new.h files.h gram.h state.h
-print.o: system.h machine.h new.h files.h gram.h state.h
-reader.o: system.h files.h new.h symtab.h lex.h gram.h
-reduce.o: system.h machine.h files.h new.h gram.h
-symtab.o: system.h new.h symtab.h gram.h
-warshall.o: system.h machine.h
-
-# Prevent GNU make v3 from overflowing arg limit on SysV.
+ for subdir in $(SUBDIRS); do \
+ if test "$$subdir" = .; then :; else \
+ test -d $(distdir)/$$subdir \
+ || mkdir $(distdir)/$$subdir \
+ || exit 1; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$(top_distdir)" \
+ distdir=../$(distdir)/$$subdir \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+ -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
+ || chmod -R a+r $(distdir)
+dist: distdir
+ $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ -chmod -R a+w $(distdir) >/dev/null 2>&1; rm -rf $(distdir)
+
+# This target untars the dist file and tries a VPATH configuration. Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+ -chmod -R a+w $(distdir) > /dev/null 2>&1; rm -rf $(distdir)
+ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf -
+ chmod -R a-w $(distdir); chmod a+w $(distdir)
+ mkdir $(distdir)/=build
+ mkdir $(distdir)/=inst
+ chmod a-w $(distdir)
+ dc_install_base=`CDPATH=: && cd $(distdir)/=inst && pwd` \
+ && cd $(distdir)/=build \
+ && ../configure --srcdir=.. --prefix=$$dc_install_base \
+ --with-included-gettext \
+ && $(MAKE) $(AM_MAKEFLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) dvi \
+ && $(MAKE) $(AM_MAKEFLAGS) check \
+ && $(MAKE) $(AM_MAKEFLAGS) install \
+ && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+ && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+ && (test `find $$dc_install_base -type f -print | wc -l` -le 1 \
+ || (echo "Error: files left after uninstall" 1>&2; \
+ exit 1) ) \
+ && $(MAKE) $(AM_MAKEFLAGS) dist \
+ && $(MAKE) $(AM_MAKEFLAGS) distclean \
+ && rm -f $(distdir).tar.gz \
+ && (test `find . -type f -print | wc -l` -eq 0 \
+ || (echo "Error: files left after distclean" 1>&2; \
+ exit 1) )
+ -chmod -R a+w $(distdir) > /dev/null 2>&1; rm -rf $(distdir)
+ @echo "$(distdir).tar.gz is ready for distribution" | \
+ sed 'h;s/./=/g;p;x;p;x'
+check-am: all-am
+check: check-recursive
+all-am: Makefile config.h
+installdirs: installdirs-recursive
+installdirs-am:
+
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]*
+ -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic mostlyclean-am
+
+dist-all: distdir
+ $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ -chmod -R a+w $(distdir) >/dev/null 2>&1; rm -rf $(distdir)
+distclean: distclean-recursive
+ -rm -f config.status config.cache config.log
+distclean-am: clean-am distclean-generic distclean-hdr distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \
+ clean-generic clean-recursive dist dist-all distcheck distclean \
+ distclean-generic distclean-hdr distclean-recursive \
+ distclean-tags distdir dvi dvi-am dvi-recursive info info-am \
+ info-recursive install install-am install-data install-data-am \
+ install-data-recursive install-exec install-exec-am \
+ install-exec-recursive install-info install-info-am \
+ install-info-recursive install-man install-recursive \
+ install-strip installcheck installcheck-am installdirs \
+ installdirs-am installdirs-recursive maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive mostlyclean \
+ mostlyclean-generic mostlyclean-recursive tags tags-recursive \
+ uninstall uninstall-am uninstall-info-am \
+ uninstall-info-recursive uninstall-recursive
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
projects / bison.git / blobdiff