This manual (@value{UPDATED}) is for GNU Bison (version
@value{VERSION}), the GNU parser generator.
-Copyright @copyright{} 1988-1993, 1995, 1998-2012 Free Software
+Copyright @copyright{} 1988-1993, 1995, 1998-2013 Free Software
Foundation, Inc.
@quotation
* Simple GLR Parsers:: Using GLR parsers on unambiguous grammars.
* Merging GLR Parses:: Using GLR parsers to resolve ambiguities.
-* GLR Semantic Actions:: Deferred semantic actions have special concerns.
+* GLR Semantic Actions:: Considerations for semantic values and deferred actions.
+* Semantic Predicates:: Controlling a parse with arbitrary computations.
* Compiler Requirements:: GLR parsers require a modern C compiler.
Examples
Grammar Rules for @code{rpcalc}
-* Rpcalc Input::
-* Rpcalc Line::
-* Rpcalc Expr::
+* Rpcalc Input:: Explanation of the @code{input} nonterminal
+* Rpcalc Line:: Explanation of the @code{line} nonterminal
+* Rpcalc Expr:: Explanation of the @code{expr} nonterminal
Location Tracking Calculator: @code{ltcalc}
* Mfcalc Declarations:: Bison declarations for multi-function calculator.
* Mfcalc Rules:: Grammar rules for the calculator.
* Mfcalc Symbol Table:: Symbol table management subroutines.
+* Mfcalc Lexer:: The lexical analyzer.
+* Mfcalc Main:: The controlling function.
Bison Grammar Files
* Grammar Outline:: Overall layout of the grammar file.
* Symbols:: Terminal and nonterminal symbols.
* Rules:: How to write grammar rules.
-* Recursion:: Writing recursive rules.
* Semantics:: Semantic values and actions.
* Tracking Locations:: Locations and actions.
* Named References:: Using named references in actions.
* Grammar Rules:: Syntax and usage of the grammar rules section.
* Epilogue:: Syntax and usage of the epilogue.
+Grammar Rules
+
+* Rules Syntax:: Syntax of the rules.
+* Empty Rules:: Symbols that can match the empty string.
+* Recursion:: Writing recursive rules.
+
+
Defining Language Semantics
* Value Type:: Specifying one data type for all semantic values.
* Multiple Types:: Specifying several alternative data types.
+* Type Generation:: Generating the semantic value type.
+* Union Decl:: Declaring the set of all semantic value types.
+* Structured Value Type:: Providing a structured semantic value type.
* Actions:: An action is the semantic definition of a grammar rule.
* Action Types:: Specifying data types for actions to operate on.
* Mid-Rule Actions:: Most actions go at the end of a rule.
This says when, why and how to use the exceptional
action in the middle of a rule.
+Actions in Mid-Rule
+
+* Using Mid-Rule Actions:: Putting an action in the middle of a rule.
+* Mid-Rule Action Translation:: How mid-rule actions are actually processed.
+* Mid-Rule Conflicts:: Mid-rule actions can cause conflicts.
+
Tracking Locations
* Location Type:: Specifying a data type for locations.
* Require Decl:: Requiring a Bison version.
* Token Decl:: Declaring terminal symbols.
* Precedence Decl:: Declaring terminals with precedence and associativity.
-* Union Decl:: Declaring the set of all semantic value types.
* Type Decl:: Declaring the choice of type for a nonterminal symbol.
* Initial Action Decl:: Code run before parsing starts.
* Destructor Decl:: Declaring how symbols are freed.
Operator Precedence
* Why Precedence:: An example showing why precedence is needed.
-* Using Precedence:: How to specify precedence in Bison grammars.
+* Using Precedence:: How to specify precedence and associativity.
+* Precedence Only:: How to specify precedence only.
* Precedence Examples:: How these features are used in the previous example.
* How Precedence:: How they work.
* Non Operators:: Using precedence for general conflicts.
@menu
* Simple GLR Parsers:: Using GLR parsers on unambiguous grammars.
* Merging GLR Parses:: Using GLR parsers to resolve ambiguities.
-* GLR Semantic Actions:: Deferred semantic actions have special concerns.
+* GLR Semantic Actions:: Considerations for semantic values and deferred actions.
+* Semantic Predicates:: Controlling a parse with arbitrary computations.
* Compiler Requirements:: GLR parsers require a modern C compiler.
@end menu
@end group
%%
-
-@group
type_decl: TYPE ID '=' type ';' ;
-@end group
@group
type:
%%
prog:
- /* Nothing. */
+ %empty
| prog stmt @{ printf ("\n"); @}
;
@node GLR Semantic Actions
@subsection GLR Semantic Actions
+The nature of GLR parsing and the structure of the generated
+parsers give rise to certain restrictions on semantic values and actions.
+
+@subsubsection Deferred semantic actions
@cindex deferred semantic actions
By definition, a deferred semantic action is not performed at the same time as
the associated reduction.
to invoke @code{yyclearin} (@pxref{Action Features}) or to attempt to free
memory referenced by @code{yylval}.
+@subsubsection YYERROR
@findex YYERROR
@cindex GLR parsers and @code{YYERROR}
Another Bison feature requiring special consideration is @code{YYERROR}
initiate error recovery.
During deterministic GLR operation, the effect of @code{YYERROR} is
the same as its effect in a deterministic parser.
-In a deferred semantic action, its effect is undefined.
-@c The effect is probably a syntax error at the split point.
+The effect in a deferred action is similar, but the precise point of the
+error is undefined; instead, the parser reverts to deterministic operation,
+selecting an unspecified stack on which to continue with a syntax error.
+In a semantic predicate (see @ref{Semantic Predicates}) during nondeterministic
+parsing, @code{YYERROR} silently prunes
+the parse that invoked the test.
+
+@subsubsection Restrictions on semantic values and locations
+GLR parsers require that you use POD (Plain Old Data) types for
+semantic values and location types when using the generated parsers as
+C++ code.
+
+@node Semantic Predicates
+@subsection Controlling a Parse with Arbitrary Predicates
+@findex %?
+@cindex Semantic predicates in GLR parsers
+
+In addition to the @code{%dprec} and @code{%merge} directives,
+GLR parsers
+allow you to reject parses on the basis of arbitrary computations executed
+in user code, without having Bison treat this rejection as an error
+if there are alternative parses. (This feature is experimental and may
+evolve. We welcome user feedback.) For example,
+
+@example
+widget:
+ %?@{ new_syntax @} "widget" id new_args @{ $$ = f($3, $4); @}
+| %?@{ !new_syntax @} "widget" id old_args @{ $$ = f($3, $4); @}
+;
+@end example
+
+@noindent
+is one way to allow the same parser to handle two different syntaxes for
+widgets. The clause preceded by @code{%?} is treated like an ordinary
+action, except that its text is treated as an expression and is always
+evaluated immediately (even when in nondeterministic mode). If the
+expression yields 0 (false), the clause is treated as a syntax error,
+which, in a nondeterministic parser, causes the stack in which it is reduced
+to die. In a deterministic parser, it acts like YYERROR.
+
+As the example shows, predicates otherwise look like semantic actions, and
+therefore you must be take them into account when determining the numbers
+to use for denoting the semantic values of right-hand side symbols.
+Predicate actions, however, have no defined value, and may not be given
+labels.
-Also, see @ref{Location Default Action, ,Default Action for Locations}, which
-describes a special usage of @code{YYLLOC_DEFAULT} in GLR parsers.
+There is a subtle difference between semantic predicates and ordinary
+actions in nondeterministic mode, since the latter are deferred.
+For example, we could try to rewrite the previous example as
+
+@example
+widget:
+ @{ if (!new_syntax) YYERROR; @}
+ "widget" id new_args @{ $$ = f($3, $4); @}
+| @{ if (new_syntax) YYERROR; @}
+ "widget" id old_args @{ $$ = f($3, $4); @}
+;
+@end example
+
+@noindent
+(reversing the sense of the predicate tests to cause an error when they are
+false). However, this
+does @emph{not} have the same effect if @code{new_args} and @code{old_args}
+have overlapping syntax.
+Since the mid-rule actions testing @code{new_syntax} are deferred,
+a GLR parser first encounters the unresolved ambiguous reduction
+for cases where @code{new_args} and @code{old_args} recognize the same string
+@emph{before} performing the tests of @code{new_syntax}. It therefore
+reports an error.
+
+Finally, be careful in writing predicates: deferred actions have not been
+evaluated, so that using them in a predicate will have undefined effects.
@node Compiler Requirements
@subsection Considerations when Compiling GLR Parsers
Here are the C and Bison declarations for the reverse polish notation
calculator. As in C, comments are placed between @samp{/*@dots{}*/}.
+@comment file: rpcalc.y
@example
/* Reverse polish notation calculator. */
+@group
%@{
- #define YYSTYPE double
+ #include <stdio.h>
#include <math.h>
int yylex (void);
void yyerror (char const *);
%@}
+@end group
+%define api.value.type @{double@}
%token NUM
%% /* Grammar rules and actions follow. */
The declarations section (@pxref{Prologue, , The prologue}) contains two
preprocessor directives and two forward declarations.
-The @code{#define} directive defines the macro @code{YYSTYPE}, thus
-specifying the C data type for semantic values of both tokens and
-groupings (@pxref{Value Type, ,Data Types of Semantic Values}). The
-Bison parser will use whatever type @code{YYSTYPE} is defined as; if you
-don't define it, @code{int} is the default. Because we specify
-@code{double}, each token and each expression has an associated value,
-which is a floating point number.
-
The @code{#include} directive is used to declare the exponentiation
function @code{pow}.
epilogue, but the parser calls them so they must be declared in the
prologue.
-The second section, Bison declarations, provides information to Bison
-about the token types (@pxref{Bison Declarations, ,The Bison
-Declarations Section}). Each terminal symbol that is not a
-single-character literal must be declared here. (Single-character
-literals normally don't need to be declared.) In this example, all the
-arithmetic operators are designated by single-character literals, so the
-only terminal symbol that needs to be declared is @code{NUM}, the token
-type for numeric constants.
+The second section, Bison declarations, provides information to Bison about
+the tokens and their types (@pxref{Bison Declarations, ,The Bison
+Declarations Section}).
+
+The @code{%define} directive defines the variable @code{api.value.type},
+thus specifying the C data type for semantic values of both tokens and
+groupings (@pxref{Value Type, ,Data Types of Semantic Values}). The Bison
+parser will use whatever type @code{api.value.type} is defined as; if you
+don't define it, @code{int} is the default. Because we specify
+@samp{@{double@}}, each token and each expression has an associated value,
+which is a floating point number. C code can use @code{YYSTYPE} to refer to
+the value @code{api.value.type}.
+
+Each terminal symbol that is not a single-character literal must be
+declared. (Single-character literals normally don't need to be declared.)
+In this example, all the arithmetic operators are designated by
+single-character literals, so the only terminal symbol that needs to be
+declared is @code{NUM}, the token type for numeric constants.
@node Rpcalc Rules
@subsection Grammar Rules for @code{rpcalc}
Here are the grammar rules for the reverse polish notation calculator.
+@comment file: rpcalc.y
@example
@group
input:
- /* empty */
+ %empty
| input line
;
@end group
rule are referred to as @code{$1}, @code{$2}, and so on.
@menu
-* Rpcalc Input::
-* Rpcalc Line::
-* Rpcalc Expr::
+* Rpcalc Input:: Explanation of the @code{input} nonterminal
+* Rpcalc Line:: Explanation of the @code{line} nonterminal
+* Rpcalc Expr:: Explanation of the @code{expr} nonterminal
@end menu
@node Rpcalc Input
@example
input:
- /* empty */
+ %empty
| input line
;
@end example
colon and the first @samp{|}; this means that @code{input} can match an
empty string of input (no tokens). We write the rules this way because it
is legitimate to type @kbd{Ctrl-d} right after you start the calculator.
-It's conventional to put an empty alternative first and write the comment
-@samp{/* empty */} in it.
+It's conventional to put an empty alternative first and to use the
+(optional) @code{%empty} directive, or to write the comment @samp{/* empty
+*/} in it (@pxref{Empty Rules}).
The second alternate rule (@code{input line}) handles all nontrivial input.
It means, ``After reading any number of lines, read one more line if
The semantic value of the token (if it has one) is stored into the
global variable @code{yylval}, which is where the Bison parser will look
-for it. (The C data type of @code{yylval} is @code{YYSTYPE}, which was
-defined at the beginning of the grammar; @pxref{Rpcalc Declarations,
-,Declarations for @code{rpcalc}}.)
+for it. (The C data type of @code{yylval} is @code{YYSTYPE}, whose value
+was defined at the beginning of the grammar via @samp{%define api.value.type
+@{double@}}; @pxref{Rpcalc Declarations,,Declarations for @code{rpcalc}}.)
A token type code of zero is returned if the end-of-input is encountered.
(Bison recognizes any nonpositive value as indicating end-of-input.)
Here is the code for the lexical analyzer:
+@comment file: rpcalc.y
@example
@group
/* The lexical analyzer returns a double floating point
kept to the bare minimum. The only requirement is that it call
@code{yyparse} to start the process of parsing.
+@comment file: rpcalc.y
@example
@group
int
@code{yyerror} (@pxref{Interface, ,Parser C-Language Interface}), so
here is the definition we will use:
+@comment file: rpcalc.y
@example
-@group
#include <stdio.h>
-@end group
@group
/* Called by yyparse on error. */
@example
$ @kbd{rpcalc}
@kbd{4 9 +}
-13
+@result{} 13
@kbd{3 7 + 3 4 5 *+-}
--13
+@result{} -13
@kbd{3 7 + 3 4 5 * + - n} @r{Note the unary minus, @samp{n}}
-13
+@result{} 13
@kbd{5 6 / 4 n +}
--3.166666667
+@result{} -3.166666667
@kbd{3 4 ^} @r{Exponentiation}
-81
+@result{} 81
@kbd{^D} @r{End-of-file indicator}
$
@end example
@group
%@{
- #define YYSTYPE double
#include <math.h>
#include <stdio.h>
int yylex (void);
@group
/* Bison declarations. */
+%define api.value.type @{double@}
%token NUM
%left '-' '+'
%left '*' '/'
-%left NEG /* negation--unary minus */
-%right '^' /* exponentiation */
+%precedence NEG /* negation--unary minus */
+%right '^' /* exponentiation */
@end group
%% /* The grammar follows. */
@group
input:
- /* empty */
+ %empty
| input line
;
@end group
types and says they are left-associative operators. The declarations
@code{%left} and @code{%right} (right associativity) take the place of
@code{%token} which is used to declare a token type name without
-associativity. (These tokens are single-character literals, which
+associativity/precedence. (These tokens are single-character literals, which
ordinarily don't need to be declared. We declare them here to specify
-the associativity.)
+the associativity/precedence.)
Operator precedence is determined by the line ordering of the
declarations; the higher the line number of the declaration (lower on
the page or screen), the higher the precedence. Hence, exponentiation
has the highest precedence, unary minus (@code{NEG}) is next, followed
-by @samp{*} and @samp{/}, and so on. @xref{Precedence, ,Operator
+by @samp{*} and @samp{/}, and so on. Unary minus is not associative,
+only precedence matters (@code{%precedence}. @xref{Precedence, ,Operator
Precedence}.
The other important new feature is the @code{%prec} in the grammar
/* Location tracking calculator. */
%@{
- #define YYSTYPE int
#include <math.h>
int yylex (void);
void yyerror (char const *);
%@}
/* Bison declarations. */
+%define api.value.type @{int@}
%token NUM
%left '-' '+'
%left '*' '/'
-%left NEG
+%precedence NEG
%right '^'
%% /* The grammar follows. */
@example
@group
input:
- /* empty */
+ %empty
| input line
;
@end group
Here is a sample session with the multi-function calculator:
@example
+@group
$ @kbd{mfcalc}
@kbd{pi = 3.141592653589}
-3.1415926536
+@result{} 3.1415926536
+@end group
+@group
@kbd{sin(pi)}
-0.0000000000
+@result{} 0.0000000000
+@end group
@kbd{alpha = beta1 = 2.3}
-2.3000000000
+@result{} 2.3000000000
@kbd{alpha}
-2.3000000000
+@result{} 2.3000000000
@kbd{ln(alpha)}
-0.8329091229
+@result{} 0.8329091229
@kbd{exp(ln(beta1))}
-2.3000000000
+@result{} 2.3000000000
$
@end example
* Mfcalc Declarations:: Bison declarations for multi-function calculator.
* Mfcalc Rules:: Grammar rules for the calculator.
* Mfcalc Symbol Table:: Symbol table management subroutines.
+* Mfcalc Lexer:: The lexical analyzer.
+* Mfcalc Main:: The controlling function.
@end menu
@node Mfcalc Declarations
@example
@group
%@{
- #include <math.h> /* For math functions, cos(), sin(), etc. */
- #include "calc.h" /* Contains definition of `symrec'. */
+ #include <stdio.h> /* For printf, etc. */
+ #include <math.h> /* For pow, used in the grammar. */
+ #include "calc.h" /* Contains definition of 'symrec'. */
int yylex (void);
void yyerror (char const *);
%@}
@end group
-@group
-%union @{
- double val; /* For returning numbers. */
- symrec *tptr; /* For returning symbol-table pointers. */
-@}
-@end group
-%token <val> NUM /* Simple double precision number. */
-%token <tptr> VAR FNCT /* Variable and function. */
-%type <val> exp
+%define api.value.type union /* Generate YYSTYPE from these types: */
+%token <double> NUM /* Simple double precision number. */
+%token <symrec*> VAR FNCT /* Symbol table pointer: variable and function. */
+%type <double> exp
@group
-%right '='
+%precedence '='
%left '-' '+'
%left '*' '/'
-%left NEG /* negation--unary minus */
-%right '^' /* exponentiation */
+%precedence NEG /* negation--unary minus */
+%right '^' /* exponentiation */
@end group
@end example
These features allow semantic values to have various data types
(@pxref{Multiple Types, ,More Than One Value Type}).
-The @code{%union} declaration specifies the entire list of possible types;
-this is instead of defining @code{YYSTYPE}. The allowable types are now
-double-floats (for @code{exp} and @code{NUM}) and pointers to entries in
-the symbol table. @xref{Union Decl, ,The Collection of Value Types}.
-
-Since values can now have various types, it is necessary to associate a
-type with each grammar symbol whose semantic value is used. These symbols
-are @code{NUM}, @code{VAR}, @code{FNCT}, and @code{exp}. Their
-declarations are augmented with information about their data type (placed
-between angle brackets).
-
-The Bison construct @code{%type} is used for declaring nonterminal
-symbols, just as @code{%token} is used for declaring token types. We
-have not used @code{%type} before because nonterminal symbols are
-normally declared implicitly by the rules that define them. But
-@code{exp} must be declared explicitly so we can specify its value type.
-@xref{Type Decl, ,Nonterminal Symbols}.
+The special @code{union} value assigned to the @code{%define} variable
+@code{api.value.type} specifies that the symbols are defined with their data
+types. Bison will generate an appropriate definition of @code{YYSTYPE} to
+store these values.
+
+Since values can now have various types, it is necessary to associate a type
+with each grammar symbol whose semantic value is used. These symbols are
+@code{NUM}, @code{VAR}, @code{FNCT}, and @code{exp}. Their declarations are
+augmented with their data type (placed between angle brackets). For
+instance, values of @code{NUM} are stored in @code{double}.
+
+The Bison construct @code{%type} is used for declaring nonterminal symbols,
+just as @code{%token} is used for declaring token types. Previously we did
+not use @code{%type} before because nonterminal symbols are normally
+declared implicitly by the rules that define them. But @code{exp} must be
+declared explicitly so we can specify its value type. @xref{Type Decl,
+,Nonterminal Symbols}.
@node Mfcalc Rules
@subsection Grammar Rules for @code{mfcalc}
%% /* The grammar follows. */
@group
input:
- /* empty */
+ %empty
| input line
;
@end group
@group
typedef struct symrec symrec;
-/* The symbol table: a chain of `struct symrec'. */
+/* The symbol table: a chain of 'struct symrec'. */
extern symrec *sym_table;
symrec *putsym (char const *, int);
@end group
@end example
-The new version of @code{main} includes a call to @code{init_table}, a
-function that initializes the symbol table. Here it is, and
-@code{init_table} as well:
+The new version of @code{main} will call @code{init_table} to initialize
+the symbol table:
@comment file: mfcalc.y: 3
@example
-#include <stdio.h>
-
-@group
-/* Called by yyparse on error. */
-void
-yyerror (char const *s)
-@{
- fprintf (stderr, "%s\n", s);
-@}
-@end group
-
@group
struct init
@{
@group
struct init const arith_fncts[] =
@{
- "sin", sin,
- "cos", cos,
- "atan", atan,
- "ln", log,
- "exp", exp,
- "sqrt", sqrt,
- 0, 0
+ @{ "atan", atan @},
+ @{ "cos", cos @},
+ @{ "exp", exp @},
+ @{ "ln", log @},
+ @{ "sin", sin @},
+ @{ "sqrt", sqrt @},
+ @{ 0, 0 @},
@};
@end group
@group
-/* The symbol table: a chain of `struct symrec'. */
+/* The symbol table: a chain of 'struct symrec'. */
symrec *sym_table;
@end group
@group
/* Put arithmetic functions in table. */
+static
void
init_table (void)
@{
@}
@}
@end group
-
-@group
-int
-main (void)
-@{
- init_table ();
- return yyparse ();
-@}
-@end group
@end example
By simply editing the initialization list and adding the necessary include
symrec *ptr;
for (ptr = sym_table; ptr != (symrec *) 0;
ptr = (symrec *)ptr->next)
- if (strcmp (ptr->name,sym_name) == 0)
+ if (strcmp (ptr->name, sym_name) == 0)
return ptr;
return 0;
@}
@end group
@end example
+@node Mfcalc Lexer
+@subsection The @code{mfcalc} Lexer
+
The function @code{yylex} must now recognize variables, numeric values, and
the single-character arithmetic operators. Strings of alphanumeric
characters with a leading letter are recognized as either variables or
@comment file: mfcalc.y: 3
@example
-@group
#include <ctype.h>
-@end group
@group
int
if (c == '.' || isdigit (c))
@{
ungetc (c, stdin);
- scanf ("%lf", &yylval.val);
+ scanf ("%lf", &yylval.NUM);
return NUM;
@}
@end group
+@end example
+
+@noindent
+Bison generated a definition of @code{YYSTYPE} with a member named
+@code{NUM} to store value of @code{NUM} symbols.
+@comment file: mfcalc.y: 3
+@example
@group
/* Char starts an identifier => read the name. */
if (isalpha (c))
symrec *s;
int i;
@end group
-
if (!symbuf)
symbuf = (char *) malloc (length + 1);
s = getsym (symbuf);
if (s == 0)
s = putsym (symbuf, VAR);
- yylval.tptr = s;
+ *((symrec**) &yylval) = s;
return s->type;
@}
@end group
@end example
+@node Mfcalc Main
+@subsection The @code{mfcalc} Main
+
The error reporting function is unchanged, and the new version of
@code{main} includes a call to @code{init_table} and sets the @code{yydebug}
on user demand (@xref{Tracing, , Tracing Your Parser}, for details):
* Grammar Outline:: Overall layout of the grammar file.
* Symbols:: Terminal and nonterminal symbols.
* Rules:: How to write grammar rules.
-* Recursion:: Writing recursive rules.
* Semantics:: Semantic values and actions.
* Tracking Locations:: Locations and actions.
* Named References:: Using named references in actions.
@node Grammar Outline
@section Outline of a Bison Grammar
+@cindex comment
+@findex // @dots{}
+@findex /* @dots{} */
A Bison grammar file has four main sections, shown here with the
appropriate delimiters:
@end example
Comments enclosed in @samp{/* @dots{} */} may appear in any of the sections.
-As a GNU extension, @samp{//} introduces a comment that
-continues until end of line.
+As a GNU extension, @samp{//} introduces a comment that continues until end
+of line.
@menu
* Prologue:: Syntax and usage of the prologue.
@code{%union} declaration.
@example
+@group
%@{
#define _GNU_SOURCE
#include <stdio.h>
#include "ptypes.h"
%@}
+@end group
+@group
%union @{
long int n;
tree t; /* @r{@code{tree} is defined in @file{ptypes.h}.} */
@}
+@end group
+@group
%@{
static void print_token_value (FILE *, int, YYSTYPE);
#define YYPRINT(F, N, L) print_token_value (F, N, L)
%@}
+@end group
@dots{}
@end example
Look again at the example of the previous section:
@example
+@group
%@{
#define _GNU_SOURCE
#include <stdio.h>
#include "ptypes.h"
%@}
+@end group
+@group
%union @{
long int n;
tree t; /* @r{@code{tree} is defined in @file{ptypes.h}.} */
@}
+@end group
+@group
%@{
static void print_token_value (FILE *, int, YYSTYPE);
#define YYPRINT(F, N, L) print_token_value (F, N, L)
%@}
+@end group
@dots{}
@end example
#include <stdio.h>
/* WARNING: The following code really belongs
- * in a `%code requires'; see below. */
+ * in a '%code requires'; see below. */
#include "ptypes.h"
#define YYLTYPE YYLTYPE
@} YYLTYPE;
@}
+@group
%union @{
long int n;
tree t; /* @r{@code{tree} is defined in @file{ptypes.h}.} */
@}
+@end group
+@group
%code @{
static void print_token_value (FILE *, int, YYSTYPE);
#define YYPRINT(F, N, L) print_token_value (F, N, L)
static void trace_token (enum yytokentype token, YYLTYPE loc);
@}
+@end group
@dots{}
@end example
one of your tokens with a @code{%token} declaration.
@node Rules
-@section Syntax of Grammar Rules
+@section Grammar Rules
+
+A Bison grammar is a list of rules.
+
+@menu
+* Rules Syntax:: Syntax of the rules.
+* Empty Rules:: Symbols that can match the empty string.
+* Recursion:: Writing recursive rules.
+@end menu
+
+@node Rules Syntax
+@subsection Syntax of Grammar Rules
@cindex rule syntax
@cindex grammar rule syntax
@cindex syntax of grammar rules
A Bison grammar rule has the following general form:
@example
-@group
@var{result}: @var{components}@dots{};
-@end group
@end example
@noindent
For example,
@example
-@group
exp: exp '+' exp;
-@end group
@end example
@noindent
@noindent
They are still considered distinct rules even when joined in this way.
-If @var{components} in a rule is empty, it means that @var{result} can
-match the empty string. For example, here is how to define a
-comma-separated sequence of zero or more @code{exp} groupings:
+@node Empty Rules
+@subsection Empty Rules
+@cindex empty rule
+@cindex rule, empty
+@findex %empty
+
+A rule is said to be @dfn{empty} if its right-hand side (@var{components})
+is empty. It means that @var{result} can match the empty string. For
+example, here is how to define an optional semicolon:
+
+@example
+semicolon.opt: | ";";
+@end example
+
+@noindent
+It is easy not to see an empty rule, especially when @code{|} is used. The
+@code{%empty} directive allows to make explicit that a rule is empty on
+purpose:
@example
@group
-expseq:
- /* empty */
-| expseq1
+semicolon.opt:
+ %empty
+| ";"
;
@end group
+@end example
+
+Flagging a non-empty rule with @code{%empty} is an error. If run with
+@option{-Wempty-rule}, @command{bison} will report empty rules without
+@code{%empty}. Using @code{%empty} enables this warning, unless
+@option{-Wno-empty-rule} was specified.
+The @code{%empty} directive is a Bison extension, it does not work with
+Yacc. To remain compatible with POSIX Yacc, it is customary to write a
+comment @samp{/* empty */} in each rule with no components:
+
+@example
@group
-expseq1:
- exp
-| expseq1 ',' exp
+semicolon.opt:
+ /* empty */
+| ";"
;
@end group
@end example
-@noindent
-It is customary to write a comment @samp{/* empty */} in each rule
-with no components.
@node Recursion
-@section Recursive Rules
+@subsection Recursive Rules
@cindex recursive rule
+@cindex rule, recursive
A rule is called @dfn{recursive} when its @var{result} nonterminal
appears also on its right hand side. Nearly all Bison grammars need to
@menu
* Value Type:: Specifying one data type for all semantic values.
* Multiple Types:: Specifying several alternative data types.
+* Type Generation:: Generating the semantic value type.
+* Union Decl:: Declaring the set of all semantic value types.
+* Structured Value Type:: Providing a structured semantic value type.
* Actions:: An action is the semantic definition of a grammar rule.
* Action Types:: Specifying data types for actions to operate on.
* Mid-Rule Actions:: Most actions go at the end of a rule.
Bison normally uses the type @code{int} for semantic values if your
program uses the same data type for all language constructs. To
-specify some other type, define @code{YYSTYPE} as a macro, like this:
+specify some other type, define the @code{%define} variable
+@code{api.value.type} like this:
+
+@example
+%define api.value.type @{double@}
+@end example
+
+@noindent
+or
+
+@example
+%define api.value.type @{struct semantic_type@}
+@end example
+
+The value of @code{api.value.type} should be a type name that does not
+contain parentheses or square brackets.
+
+Alternatively, instead of relying of Bison's @code{%define} support, you may
+rely on the C/C++ preprocessor and define @code{YYSTYPE} as a macro, like
+this:
@example
#define YYSTYPE double
@end example
@noindent
-@code{YYSTYPE}'s replacement list should be a type name
-that does not contain parentheses or square brackets.
This macro definition must go in the prologue of the grammar file
-(@pxref{Grammar Outline, ,Outline of a Bison Grammar}).
+(@pxref{Grammar Outline, ,Outline of a Bison Grammar}). If compatibility
+with POSIX Yacc matters to you, use this. Note however that Bison cannot
+know @code{YYSTYPE}'s value, not even whether it is defined, so there are
+services it cannot provide. Besides this works only for languages that have
+a preprocessor.
@node Multiple Types
@subsection More Than One Value Type
@itemize @bullet
@item
-Specify the entire collection of possible data types, either by using the
-@code{%union} Bison declaration (@pxref{Union Decl, ,The Collection of
-Value Types}), or by using a @code{typedef} or a @code{#define} to
-define @code{YYSTYPE} to be a union type whose member names are
-the type tags.
+Specify the entire collection of possible data types. There are several
+options:
+@itemize @bullet
+@item
+let Bison compute the union type from the tags you assign to symbols;
+
+@item
+use the @code{%union} Bison declaration (@pxref{Union Decl, ,The Union
+Declaration});
+
+@item
+define the @code{%define} variable @code{api.value.type} to be a union type
+whose members are the type tags (@pxref{Structured Value Type,, Providing a
+Structured Semantic Value Type});
+
+@item
+use a @code{typedef} or a @code{#define} to define @code{YYSTYPE} to be a
+union type whose member names are the type tags.
+@end itemize
@item
Choose one of those types for each symbol (terminal or nonterminal) for
Decl, ,Nonterminal Symbols}).
@end itemize
+@node Type Generation
+@subsection Generating the Semantic Value Type
+@cindex declaring value types
+@cindex value types, declaring
+@findex %define api.value.type union
+
+The special value @code{union} of the @code{%define} variable
+@code{api.value.type} instructs Bison that the tags used with the
+@code{%token} and @code{%type} directives are genuine types, not names of
+members of @code{YYSTYPE}.
+
+For example:
+
+@example
+%define api.value.type union
+%token <int> INT "integer"
+%token <int> 'n'
+%type <int> expr
+%token <char const *> ID "identifier"
+@end example
+
+@noindent
+generates an appropriate value of @code{YYSTYPE} to support each symbol
+type. The name of the member of @code{YYSTYPE} for tokens than have a
+declared identifier @var{id} (such as @code{INT} and @code{ID} above, but
+not @code{'n'}) is @code{@var{id}}. The other symbols have unspecified
+names on which you should not depend; instead, relying on C casts to access
+the semantic value with the appropriate type:
+
+@example
+/* For an "integer". */
+yylval.INT = 42;
+return INT;
+
+/* For an 'n', also declared as int. */
+*((int*)&yylval) = 42;
+return 'n';
+
+/* For an "identifier". */
+yylval.ID = "42";
+return ID;
+@end example
+
+If the @code{%define} variable @code{api.token.prefix} is defined
+(@pxref{%define Summary,,api.token.prefix}), then it is also used to prefix
+the union member names. For instance, with @samp{%define api.token.prefix
+@{TOK_@}}:
+
+@example
+/* For an "integer". */
+yylval.TOK_INT = 42;
+return TOK_INT;
+@end example
+
+This Bison extension cannot work if @code{%yacc} (or
+@option{-y}/@option{--yacc}) is enabled, as POSIX mandates that Yacc
+generate tokens as macros (e.g., @samp{#define INT 258}, or @samp{#define
+TOK_INT 258}).
+
+This feature is new, and user feedback would be most welcome.
+
+A similar feature is provided for C++ that in addition overcomes C++
+limitations (that forbid non-trivial objects to be part of a @code{union}):
+@samp{%define api.value.type variant}, see @ref{C++ Variants}.
+
+@node Union Decl
+@subsection The Union Declaration
+@cindex declaring value types
+@cindex value types, declaring
+@findex %union
+
+The @code{%union} declaration specifies the entire collection of possible
+data types for semantic values. The keyword @code{%union} is followed by
+braced code containing the same thing that goes inside a @code{union} in C@.
+
+For example:
+
+@example
+@group
+%union @{
+ double val;
+ symrec *tptr;
+@}
+@end group
+@end example
+
+@noindent
+This says that the two alternative types are @code{double} and @code{symrec
+*}. They are given names @code{val} and @code{tptr}; these names are used
+in the @code{%token} and @code{%type} declarations to pick one of the types
+for a terminal or nonterminal symbol (@pxref{Type Decl, ,Nonterminal Symbols}).
+
+As an extension to POSIX, a tag is allowed after the @code{%union}. For
+example:
+
+@example
+@group
+%union value @{
+ double val;
+ symrec *tptr;
+@}
+@end group
+@end example
+
+@noindent
+specifies the union tag @code{value}, so the corresponding C type is
+@code{union value}. If you do not specify a tag, it defaults to
+@code{YYSTYPE}.
+
+As another extension to POSIX, you may specify multiple @code{%union}
+declarations; their contents are concatenated. However, only the first
+@code{%union} declaration can specify a tag.
+
+Note that, unlike making a @code{union} declaration in C, you need not write
+a semicolon after the closing brace.
+
+@node Structured Value Type
+@subsection Providing a Structured Semantic Value Type
+@cindex declaring value types
+@cindex value types, declaring
+@findex %union
+
+Instead of @code{%union}, you can define and use your own union type
+@code{YYSTYPE} if your grammar contains at least one @samp{<@var{type}>}
+tag. For example, you can put the following into a header file
+@file{parser.h}:
+
+@example
+@group
+union YYSTYPE @{
+ double val;
+ symrec *tptr;
+@};
+@end group
+@end example
+
+@noindent
+and then your grammar can use the following instead of @code{%union}:
+
+@example
+@group
+%@{
+#include "parser.h"
+%@}
+%define api.value.type @{union YYSTYPE@}
+%type <val> expr
+%token <tptr> ID
+@end group
+@end example
+
+Actually, you may also provide a @code{struct} rather that a @code{union},
+which may be handy if you want to track information for every symbol (such
+as preceding comments).
+
+The type you provide may even be structured and include pointers, in which
+case the type tags you provide may be composite, with @samp{.} and @samp{->}
+operators.
+
@node Actions
@subsection Actions
@cindex action
following example, the action is triggered only when @samp{b} is found:
@example
-@group
a-or-b: 'a'|'b' @{ a_or_b_found = 1; @};
-@end group
@end example
@cindex default action
@group
bar:
- /* empty */ @{ previous_expr = $0; @}
+ %empty @{ previous_expr = $0; @}
;
@end group
@end example
These actions are written just like usual end-of-rule actions, but they
are executed before the parser even recognizes the following components.
+@menu
+* Using Mid-Rule Actions:: Putting an action in the middle of a rule.
+* Mid-Rule Action Translation:: How mid-rule actions are actually processed.
+* Mid-Rule Conflicts:: Mid-rule actions can cause conflicts.
+@end menu
+
+@node Using Mid-Rule Actions
+@subsubsection Using Mid-Rule Actions
+
A mid-rule action may refer to the components preceding it using
@code{$@var{n}}, but it may not refer to subsequent components because
it is run before they are parsed.
@example
@group
stmt:
- LET '(' var ')'
- @{ $<context>$ = push_context (); declare_variable ($3); @}
+ "let" '(' var ')'
+ @{
+ $<context>$ = push_context ();
+ declare_variable ($3);
+ @}
stmt
- @{ $$ = $6; pop_context ($<context>5); @}
+ @{
+ $$ = $6;
+ pop_context ($<context>5);
+ @}
@end group
@end example
@code{context} in the data-type union. Then it calls
@code{declare_variable} to add the new variable to that list. Once the
first action is finished, the embedded statement @code{stmt} can be
-parsed. Note that the mid-rule action is component number 5, so the
-@samp{stmt} is component number 6.
+parsed.
-After the embedded statement is parsed, its semantic value becomes the
-value of the entire @code{let}-statement. Then the semantic value from the
-earlier action is used to restore the prior list of variables. This
-removes the temporary @code{let}-variable from the list so that it won't
-appear to exist while the rest of the program is parsed.
+Note that the mid-rule action is component number 5, so the @samp{stmt} is
+component number 6. Named references can be used to improve the readability
+and maintainability (@pxref{Named References}):
-@findex %destructor
-@cindex discarded symbols, mid-rule actions
-@cindex error recovery, mid-rule actions
+@example
+@group
+stmt:
+ "let" '(' var ')'
+ @{
+ $<context>let = push_context ();
+ declare_variable ($3);
+ @}[let]
+ stmt
+ @{
+ $$ = $6;
+ pop_context ($<context>let);
+ @}
+@end group
+@end example
+
+After the embedded statement is parsed, its semantic value becomes the
+value of the entire @code{let}-statement. Then the semantic value from the
+earlier action is used to restore the prior list of variables. This
+removes the temporary @code{let}-variable from the list so that it won't
+appear to exist while the rest of the program is parsed.
+
+@findex %destructor
+@cindex discarded symbols, mid-rule actions
+@cindex error recovery, mid-rule actions
In the above example, if the parser initiates error recovery (@pxref{Error
Recovery}) while parsing the tokens in the embedded statement @code{stmt},
it might discard the previous semantic context @code{$<context>5} without
@group
%type <context> let
%destructor @{ pop_context ($$); @} let
+@end group
%%
+@group
stmt:
let stmt
@{
$$ = $2;
- pop_context ($1);
+ pop_context ($let);
@};
+@end group
+@group
let:
- LET '(' var ')'
+ "let" '(' var ')'
@{
- $$ = push_context ();
+ $let = push_context ();
declare_variable ($3);
@};
Any mid-rule action can be converted to an end-of-rule action in this way, and
this is what Bison actually does to implement mid-rule actions.
+@node Mid-Rule Action Translation
+@subsubsection Mid-Rule Action Translation
+@vindex $@@@var{n}
+@vindex @@@var{n}
+
+As hinted earlier, mid-rule actions are actually transformed into regular
+rules and actions. The various reports generated by Bison (textual,
+graphical, etc., see @ref{Understanding, , Understanding Your Parser})
+reveal this translation, best explained by means of an example. The
+following rule:
+
+@example
+exp: @{ a(); @} "b" @{ c(); @} @{ d(); @} "e" @{ f(); @};
+@end example
+
+@noindent
+is translated into:
+
+@example
+$@@1: %empty @{ a(); @};
+$@@2: %empty @{ c(); @};
+$@@3: %empty @{ d(); @};
+exp: $@@1 "b" $@@2 $@@3 "e" @{ f(); @};
+@end example
+
+@noindent
+with new nonterminal symbols @code{$@@@var{n}}, where @var{n} is a number.
+
+A mid-rule action is expected to generate a value if it uses @code{$$}, or
+the (final) action uses @code{$@var{n}} where @var{n} denote the mid-rule
+action. In that case its nonterminal is rather named @code{@@@var{n}}:
+
+@example
+exp: @{ a(); @} "b" @{ $$ = c(); @} @{ d(); @} "e" @{ f = $1; @};
+@end example
+
+@noindent
+is translated into
+
+@example
+@@1: %empty @{ a(); @};
+@@2: %empty @{ $$ = c(); @};
+$@@3: %empty @{ d(); @};
+exp: @@1 "b" @@2 $@@3 "e" @{ f = $1; @}
+@end example
+
+There are probably two errors in the above example: the first mid-rule
+action does not generate a value (it does not use @code{$$} although the
+final action uses it), and the value of the second one is not used (the
+final action does not use @code{$3}). Bison reports these errors when the
+@code{midrule-value} warnings are enabled (@pxref{Invocation, ,Invoking
+Bison}):
+
+@example
+$ bison -fcaret -Wmidrule-value mid.y
+@group
+mid.y:2.6-13: warning: unset value: $$
+ exp: @{ a(); @} "b" @{ $$ = c(); @} @{ d(); @} "e" @{ f = $1; @};
+ ^^^^^^^^
+@end group
+@group
+mid.y:2.19-31: warning: unused value: $3
+ exp: @{ a(); @} "b" @{ $$ = c(); @} @{ d(); @} "e" @{ f = $1; @};
+ ^^^^^^^^^^^^^
+@end group
+@end example
+
+
+@node Mid-Rule Conflicts
+@subsubsection Conflicts due to Mid-Rule Actions
Taking action before a rule is completely recognized often leads to
conflicts since the parser must commit to a parse in order to execute the
action. For example, the following two rules, without mid-rule actions,
@example
@group
subroutine:
- /* empty */ @{ prepare_for_local_variables (); @}
+ %empty @{ prepare_for_local_variables (); @}
;
@end group
Now Bison can execute the action in the rule for @code{subroutine} without
deciding which rule for @code{compound} it will eventually use.
+
@node Tracking Locations
@section Tracking Locations
@cindex location
else
@{
$$ = 1;
- fprintf (stderr,
- "Division by zero, l%d,c%d-l%d,c%d",
+ fprintf (stderr, "%d.%d-%d.%d: division by zero",
@@3.first_line, @@3.first_column,
@@3.last_line, @@3.last_column);
@}
else
@{
$$ = 1;
- fprintf (stderr,
- "Division by zero, l%d,c%d-l%d,c%d",
+ fprintf (stderr, "%d.%d-%d.%d: division by zero",
@@3.first_line, @@3.first_column,
@@3.last_line, @@3.last_column);
@}
* Require Decl:: Requiring a Bison version.
* Token Decl:: Declaring terminal symbols.
* Precedence Decl:: Declaring terminals with precedence and associativity.
-* Union Decl:: Declaring the set of all semantic value types.
* Type Decl:: Declaring the choice of type for a nonterminal symbol.
* Initial Action Decl:: Code run before parsing starts.
* Destructor Decl:: Declaring how symbols are freed.
the parser, so that the function @code{yylex} (if it is in this file)
can use the name @var{name} to stand for this token type's code.
-Alternatively, you can use @code{%left}, @code{%right}, or
+Alternatively, you can use @code{%left}, @code{%right},
+@code{%precedence}, or
@code{%nonassoc} instead of @code{%token}, if you wish to specify
associativity and precedence. @xref{Precedence Decl, ,Operator
Precedence}.
@cindex declaring operator precedence
@cindex operator precedence, declaring
-Use the @code{%left}, @code{%right} or @code{%nonassoc} declaration to
+Use the @code{%left}, @code{%right}, @code{%nonassoc}, or
+@code{%precedence} declaration to
declare a token and specify its precedence and associativity, all at
once. These are called @dfn{precedence declarations}.
@xref{Precedence, ,Operator Precedence}, for general information on
means that @samp{@var{x} @var{op} @var{y} @var{op} @var{z}} is
considered a syntax error.
+@code{%precedence} gives only precedence to the @var{symbols}, and
+defines no associativity at all. Use this to define precedence only,
+and leave any potential conflict due to associativity enabled.
+
@item
The precedence of an operator determines how it nests with other operators.
All the tokens declared in a single precedence declaration have equal
%left OR 134 "<=" 135 // Declares 134 for OR and 135 for "<=".
@end example
-@node Union Decl
-@subsection The Collection of Value Types
-@cindex declaring value types
-@cindex value types, declaring
-@findex %union
-
-The @code{%union} declaration specifies the entire collection of
-possible data types for semantic values. The keyword @code{%union} is
-followed by braced code containing the same thing that goes inside a
-@code{union} in C@.
-
-For example:
-
-@example
-@group
-%union @{
- double val;
- symrec *tptr;
-@}
-@end group
-@end example
-
-@noindent
-This says that the two alternative types are @code{double} and @code{symrec
-*}. They are given names @code{val} and @code{tptr}; these names are used
-in the @code{%token} and @code{%type} declarations to pick one of the types
-for a terminal or nonterminal symbol (@pxref{Type Decl, ,Nonterminal Symbols}).
-
-As an extension to POSIX, a tag is allowed after the
-@code{union}. For example:
-
-@example
-@group
-%union value @{
- double val;
- symrec *tptr;
-@}
-@end group
-@end example
-
-@noindent
-specifies the union tag @code{value}, so the corresponding C type is
-@code{union value}. If you do not specify a tag, it defaults to
-@code{YYSTYPE}.
-
-As another extension to POSIX, you may specify multiple
-@code{%union} declarations; their contents are concatenated. However,
-only the first @code{%union} declaration can specify a tag.
-
-Note that, unlike making a @code{union} declaration in C, you need not write
-a semicolon after the closing brace.
-
-Instead of @code{%union}, you can define and use your own union type
-@code{YYSTYPE} if your grammar contains at least one
-@samp{<@var{type}>} tag. For example, you can put the following into
-a header file @file{parser.h}:
-
-@example
-@group
-union YYSTYPE @{
- double val;
- symrec *tptr;
-@};
-typedef union YYSTYPE YYSTYPE;
-@end group
-@end example
-
-@noindent
-and then your grammar can use the following
-instead of @code{%union}:
-
-@example
-@group
-%@{
-#include "parser.h"
-%@}
-%type <val> expr
-%token <tptr> ID
-@end group
-@end example
-
@node Type Decl
@subsection Nonterminal Symbols
@cindex declaring value types, nonterminals
@noindent
Here @var{nonterminal} is the name of a nonterminal symbol, and
@var{type} is the name given in the @code{%union} to the alternative
-that you want (@pxref{Union Decl, ,The Collection of Value Types}). You
+that you want (@pxref{Union Decl, ,The Union Declaration}). You
can give any number of nonterminal symbols in the same @code{%type}
declaration, if they have the same value type. Use spaces to separate
the symbol names.
@example
%union @{ char *string; @}
-%token <string> STRING1
-%token <string> STRING2
-%type <string> string1
-%type <string> string2
+%token <string> STRING1 STRING2
+%type <string> string1 string2
%union @{ char character; @}
%token <character> CHR
%type <character> chr
@example
%union @{ char *string; @}
-%token <string> STRING1
-%token <string> STRING2
-%type <string> string1
-%type <string> string2
+%token <string> STRING1 STRING2
+%type <string> string1 string2
%union @{ char character; @}
%token <character> CHR
%type <character> chr
including @code{yylval} and @code{yylloc}.)
Alternatively, you can generate a pure, reentrant parser. The Bison
-declaration @code{%define api.pure} says that you want the parser to be
+declaration @samp{%define api.pure} says that you want the parser to be
reentrant. It looks like this:
@example
@code{yylex}. @xref{Pure Calling, ,Calling Conventions for Pure
Parsers}, for the details of this. The variable @code{yynerrs}
becomes local in @code{yyparse} in pull mode but it becomes a member
-of yypstate in push mode. (@pxref{Error Reporting, ,The Error
+of @code{yypstate} in push mode. (@pxref{Error Reporting, ,The Error
Reporting Function @code{yyerror}}). The convention for calling
@code{yyparse} itself is unchanged.
Bison also supports both the push parser interface along with the pull parser
interface in the same generated parser. In order to get this functionality,
-you should replace the @code{%define api.push-pull push} declaration with the
-@code{%define api.push-pull both} declaration. Doing this will create all of
+you should replace the @samp{%define api.push-pull push} declaration with the
+@samp{%define api.push-pull both} declaration. Doing this will create all of
the symbols mentioned earlier along with the two extra symbols, @code{yyparse}
and @code{yypull_parse}. @code{yyparse} can be used exactly as it normally
would be used. However, the user should note that it is implemented in the
generated parser by calling @code{yypull_parse}.
This makes the @code{yyparse} function that is generated with the
-@code{%define api.push-pull both} declaration slower than the normal
+@samp{%define api.push-pull both} declaration slower than the normal
@code{yyparse} function. If the user
calls the @code{yypull_parse} function it will parse the rest of the input
stream. It is possible to @code{yypush_parse} tokens to select a subgrammar
yypstate_delete (ps);
@end example
-Adding the @code{%define api.pure full} declaration does exactly the same thing
-to the generated parser with @code{%define api.push-pull both} as it did for
-@code{%define api.push-pull push}.
+Adding the @samp{%define api.pure} declaration does exactly the same thing to
+the generated parser with @samp{%define api.push-pull both} as it did for
+@samp{%define api.push-pull push}.
@node Decl Summary
@subsection Bison Declaration Summary
@deffn {Directive} %union
Declare the collection of data types that semantic values may have
-(@pxref{Union Decl, ,The Collection of Value Types}).
+(@pxref{Union Decl, ,The Union Declaration}).
@end deffn
@deffn {Directive} %token
@end deffn
@deffn {Directive} %debug
-In the parser implementation file, define the macro @code{YYDEBUG} (or
-@code{@var{prefix}DEBUG} with @samp{%define api.prefix @var{prefix}}, see
-@ref{Multiple Parsers, ,Multiple Parsers in the Same Program}) to 1 if it is
-not already defined, so that the debugging facilities are compiled.
+Instrument the parser for traces. Obsoleted by @samp{%define
+parse.trace}.
@xref{Tracing, ,Tracing Your Parser}.
@end deffn
@deffn {Directive} %define @var{variable}
@deffnx {Directive} %define @var{variable} @var{value}
+@deffnx {Directive} %define @var{variable} @{@var{value}@}
@deffnx {Directive} %define @var{variable} "@var{value}"
Define a variable to adjust Bison's behavior. @xref{%define Summary}.
@end deffn
uppercase, with each series of non alphanumerical characters converted to a
single underscore.
-For instance with @samp{%define api.prefix "calc"} and @samp{%defines
+For instance with @samp{%define api.prefix @{calc@}} and @samp{%defines
"lib/parse.h"}, the header will be guarded as follows.
@example
#ifndef YY_CALC_LIB_PARSE_H_INCLUDED
@end deffn
@deffn {Directive} %defines @var{defines-file}
-Same as above, but save in the file @var{defines-file}.
+Same as above, but save in the file @file{@var{defines-file}}.
@end deffn
@deffn {Directive} %destructor
supported languages include C, C++, and Java.
@var{language} is case-insensitive.
-This directive is experimental and its effect may be modified in future
-releases.
@end deffn
@deffn {Directive} %locations
accurate syntax error messages.
@end deffn
+@deffn {Directive} %name-prefix "@var{prefix}"
+Rename the external symbols used in the parser so that they start with
+@var{prefix} instead of @samp{yy}. The precise list of symbols renamed
+in C parsers
+is @code{yyparse}, @code{yylex}, @code{yyerror}, @code{yynerrs},
+@code{yylval}, @code{yychar}, @code{yydebug}, and
+(if locations are used) @code{yylloc}. If you use a push parser,
+@code{yypush_parse}, @code{yypull_parse}, @code{yypstate},
+@code{yypstate_new} and @code{yypstate_delete} will
+also be renamed. For example, if you use @samp{%name-prefix "c_"}, the
+names become @code{c_parse}, @code{c_lex}, and so on.
+For C++ parsers, see the @samp{%define api.namespace} documentation in this
+section.
+@xref{Multiple Parsers, ,Multiple Parsers in the Same Program}.
+@end deffn
+
@ifset defaultprec
@deffn {Directive} %no-default-prec
Do not assign a precedence to rules lacking an explicit @code{%prec}
@end deffn
@deffn {Directive} %output "@var{file}"
-Specify @var{file} for the parser implementation file.
+Generate the parser implementation in @file{@var{file}}.
@end deffn
@deffn {Directive} %pure-parser
-Deprecated version of @code{%define api.pure} (@pxref{%define
+Deprecated version of @samp{%define api.pure} (@pxref{%define
Summary,,api.pure}), for which Bison is more careful to warn about
unreasonable usage.
@end deffn
@deffn {Directive} %define @var{variable}
@deffnx {Directive} %define @var{variable} @var{value}
+@deffnx {Directive} %define @var{variable} @{@var{value}@}
@deffnx {Directive} %define @var{variable} "@var{value}"
Define @var{variable} to @var{value}.
-@var{value} must be placed in quotation marks if it contains any
-character other than a letter, underscore, period, or non-initial dash
-or digit. Omitting @code{"@var{value}"} entirely is always equivalent
-to specifying @code{""}.
+The type of the values depend on the syntax. Braces denote value in the
+target language (e.g., a namespace, a type, etc.). Keyword values (no
+delimiters) denote finite choice (e.g., a variation of a feature). String
+values denote remaining cases (e.g., a file name).
-It is an error if a @var{variable} is defined by @code{%define}
-multiple times, but see @ref{Bison Options,,-D
-@var{name}[=@var{value}]}.
+It is an error if a @var{variable} is defined by @code{%define} multiple
+times, but see @ref{Bison Options,,-D @var{name}[=@var{value}]}.
@end deffn
The rest of this section summarizes variables and values that
skeleton (@pxref{Decl Summary,,%language}, @pxref{Decl
Summary,,%skeleton}).
Unaccepted @var{variable}s produce an error.
-Some of the accepted @var{variable}s are:
+Some of the accepted @var{variable}s are described below.
+
+@c ================================================== api.namespace
+@deffn Directive {%define api.namespace} @{@var{namespace}@}
+@itemize
+@item Languages(s): C++
+
+@item Purpose: Specify the namespace for the parser class.
+For example, if you specify:
+
+@example
+%define api.namespace @{foo::bar@}
+@end example
+
+Bison uses @code{foo::bar} verbatim in references such as:
+
+@example
+foo::bar::parser::semantic_type
+@end example
+
+However, to open a namespace, Bison removes any leading @code{::} and then
+splits on any remaining occurrences:
+
+@example
+namespace foo @{ namespace bar @{
+ class position;
+ class location;
+@} @}
+@end example
+
+@item Accepted Values:
+Any absolute or relative C++ namespace reference without a trailing
+@code{"::"}. For example, @code{"foo"} or @code{"::foo::bar"}.
+
+@item Default Value:
+The value specified by @code{%name-prefix}, which defaults to @code{yy}.
+This usage of @code{%name-prefix} is for backward compatibility and can
+be confusing since @code{%name-prefix} also specifies the textual prefix
+for the lexical analyzer function. Thus, if you specify
+@code{%name-prefix}, it is best to also specify @samp{%define
+api.namespace} so that @code{%name-prefix} @emph{only} affects the
+lexical analyzer function. For example, if you specify:
+
+@example
+%define api.namespace @{foo@}
+%name-prefix "bar::"
+@end example
+
+The parser namespace is @code{foo} and @code{yylex} is referenced as
+@code{bar::lex}.
+@end itemize
+@end deffn
+@c api.namespace
-@itemize @bullet
@c ================================================== api.location.type
-@item @code{api.location.type}
-@findex %define api.location.type
+@deffn {Directive} {%define api.location.type} @{@var{type}@}
@itemize @bullet
@item Language(s): C++, Java
@item Default Value: none
-@item History: introduced in Bison 2.7
+@item History:
+Introduced in Bison 2.7 for C, C++ and Java. Introduced under the name
+@code{location_type} for C++ in Bison 2.5 and for Java in Bison 2.4.
@end itemize
+@end deffn
@c ================================================== api.prefix
-@item @code{api.prefix}
-@findex %define api.prefix
+@deffn {Directive} {%define api.prefix} @{@var{prefix}@}
@itemize @bullet
@item Language(s): All
@item History: introduced in Bison 2.6
@end itemize
+@end deffn
@c ================================================== api.pure
-@item @code{api.pure}
-@findex %define api.pure
+@deffn Directive {%define api.pure} @var{purity}
@itemize @bullet
@item Language(s): C
@code{yyerror} are:
@example
-void yyerror (char const *msg); /* Yacc parsers. */
-void yyerror (YYLTYPE *locp, char const *msg); /* GLR parsers. */
+void yyerror (char const *msg); // Yacc parsers.
+void yyerror (YYLTYPE *locp, char const *msg); // GLR parsers.
@end example
But if @samp{%locations %define api.pure %parse-param @{int *nastiness@}} is
@item Default Value: @code{false}
-@item History: the @code{full} value was introduced in Bison 2.7
+@item History:
+the @code{full} value was introduced in Bison 2.7
@end itemize
+@end deffn
+@c api.pure
-@c ================================================== api.push-pull
-@item @code{api.push-pull}
-@findex %define api.push-pull
+
+@c ================================================== api.push-pull
+@deffn Directive {%define api.push-pull} @var{kind}
@itemize @bullet
@item Language(s): C (deterministic parsers only)
@item Default Value: @code{pull}
@end itemize
+@end deffn
+@c api.push-pull
+
-@c ================================================== lr.default-reductions
-@item @code{lr.default-reductions}
-@findex %define lr.default-reductions
+@c ================================================== api.token.constructor
+@deffn Directive {%define api.token.constructor}
+
+@itemize @bullet
+@item Language(s):
+C++
+
+@item Purpose:
+When variant-based semantic values are enabled (@pxref{C++ Variants}),
+request that symbols be handled as a whole (type, value, and possibly
+location) in the scanner. @xref{Complete Symbols}, for details.
+
+@item Accepted Values:
+Boolean.
+
+@item Default Value:
+@code{false}
+@item History:
+introduced in Bison 3.0
+@end itemize
+@end deffn
+@c api.token.constructor
+
+
+@c ================================================== api.token.prefix
+@deffn Directive {%define api.token.prefix} @{@var{prefix}@}
+
+@itemize
+@item Languages(s): all
+
+@item Purpose:
+Add a prefix to the token names when generating their definition in the
+target language. For instance
+
+@example
+%token FILE for ERROR
+%define api.token.prefix @{TOK_@}
+%%
+start: FILE for ERROR;
+@end example
+
+@noindent
+generates the definition of the symbols @code{TOK_FILE}, @code{TOK_for},
+and @code{TOK_ERROR} in the generated source files. In particular, the
+scanner must use these prefixed token names, while the grammar itself
+may still use the short names (as in the sample rule given above). The
+generated informational files (@file{*.output}, @file{*.xml},
+@file{*.dot}) are not modified by this prefix.
+
+Bison also prefixes the generated member names of the semantic value union.
+@xref{Type Generation,, Generating the Semantic Value Type}, for more
+details.
+
+See @ref{Calc++ Parser} and @ref{Calc++ Scanner}, for a complete example.
+
+@item Accepted Values:
+Any string. Should be a valid identifier prefix in the target language,
+in other words, it should typically be an identifier itself (sequence of
+letters, underscores, and ---not at the beginning--- digits).
+
+@item Default Value:
+empty
+@item History:
+introduced in Bison 3.0
+@end itemize
+@end deffn
+@c api.token.prefix
+
+
+@c ================================================== api.value.type
+@deffn Directive {%define api.value.type} @var{type}
+@itemize @bullet
+@item Language(s):
+all
+
+@item Purpose:
+The type for semantic values.
+
+@item Accepted Values:
+@table @asis
+@item @code{""}
+This grammar has no semantic value at all. This is not properly supported
+yet.
+@item @code{%union} (C, C++)
+The type is defined thanks to the @code{%union} directive. You don't have
+to define @code{api.value.type} in that case, using @code{%union} suffices.
+@xref{Union Decl, ,The Union Declaration}.
+For instance:
+@example
+%define api.value.type "%union"
+%union
+@{
+ int ival;
+ char *sval;
+@}
+%token <ival> INT "integer"
+%token <sval> STR "string"
+@end example
+
+@item @code{union} (C, C++)
+The symbols are defined with type names, from which Bison will generate a
+@code{union}. For instance:
+@example
+%define api.value.type "union"
+%token <int> INT "integer"
+%token <char *> STR "string"
+@end example
+This feature needs user feedback to stabilize. Note that most C++ objects
+cannot be stored in a @code{union}.
+
+@item @code{variant} (C++)
+This is similar to @code{union}, but special storage techniques are used to
+allow any kind of C++ object to be used. For instance:
+@example
+%define api.value.type "variant"
+%token <int> INT "integer"
+%token <std::string> STR "string"
+@end example
+This feature needs user feedback to stabilize.
+@xref{C++ Variants}.
+
+@item any other identifier
+Use this name as semantic value.
+@example
+%code requires
+@{
+ struct my_value
+ @{
+ enum
+ @{
+ is_int, is_str
+ @} kind;
+ union
+ @{
+ int ival;
+ char *sval;
+ @} u;
+ @};
+@}
+%define api.value.type "struct my_value"
+%token <u.ival> INT "integer"
+%token <u.sval> STR "string"
+@end example
+@end table
+
+@item Default Value:
+@itemize @minus
+@item
+@code{%union} if @code{%union} is used, otherwise @dots{}
+@item
+@code{int} if type tags are used (i.e., @samp{%token <@var{type}>@dots{}} or
+@samp{%token <@var{type}>@dots{}} is used), otherwise @dots{}
+@item
+@code{""}
+@end itemize
+
+@item History:
+introduced in Bison 3.0. Was introduced for Java only in 2.3b as
+@code{stype}.
+@end itemize
+@end deffn
+@c api.value.type
+
+
+@c ================================================== location_type
+@deffn Directive {%define location_type}
+Obsoleted by @code{api.location.type} since Bison 2.7.
+@end deffn
+
+
+@c ================================================== lr.default-reduction
+
+@deffn Directive {%define lr.default-reduction} @var{when}
@itemize @bullet
@item Language(s): all
@item @code{accepting} if @code{lr.type} is @code{canonical-lr}.
@item @code{most} otherwise.
@end itemize
+@item History:
+introduced as @code{lr.default-reductions} in 2.5, renamed as
+@code{lr.default-reduction} in 3.0.
@end itemize
+@end deffn
-@c ============================================ lr.keep-unreachable-states
+@c ============================================ lr.keep-unreachable-state
-@item @code{lr.keep-unreachable-states}
-@findex %define lr.keep-unreachable-states
+@deffn Directive {%define lr.keep-unreachable-state}
@itemize @bullet
@item Language(s): all
remain in the parser tables. @xref{Unreachable States}.
@item Accepted Values: Boolean
@item Default Value: @code{false}
+@item History:
+introduced as @code{lr.keep_unreachable_states} in 2.3b, renamed as
+@code{lr.keep-unreachable-states} in 2.5, and as
+@code{lr.keep-unreachable-state} in 3.0.
@end itemize
+@end deffn
+@c lr.keep-unreachable-state
@c ================================================== lr.type
-@item @code{lr.type}
-@findex %define lr.type
+@deffn Directive {%define lr.type} @var{type}
@itemize @bullet
@item Language(s): all
@item Default Value: @code{lalr}
@end itemize
+@end deffn
@c ================================================== namespace
+@deffn Directive %define namespace @{@var{namespace}@}
+Obsoleted by @code{api.namespace}
+@c namespace
+@end deffn
-@item @code{namespace}
-@findex %define namespace
+@c ================================================== parse.assert
+@deffn Directive {%define parse.assert}
@itemize
@item Languages(s): C++
-@item Purpose: Specify the namespace for the parser class.
-For example, if you specify:
-
-@smallexample
-%define namespace "foo::bar"
-@end smallexample
+@item Purpose: Issue runtime assertions to catch invalid uses.
+In C++, when variants are used (@pxref{C++ Variants}), symbols must be
+constructed and
+destroyed properly. This option checks these constraints.
-Bison uses @code{foo::bar} verbatim in references such as:
+@item Accepted Values: Boolean
-@smallexample
-foo::bar::parser::semantic_type
-@end smallexample
+@item Default Value: @code{false}
+@end itemize
+@end deffn
+@c parse.assert
-However, to open a namespace, Bison removes any leading @code{::} and then
-splits on any remaining occurrences:
-@smallexample
-namespace foo @{ namespace bar @{
- class position;
- class location;
-@} @}
-@end smallexample
-
-@item Accepted Values: Any absolute or relative C++ namespace reference without
-a trailing @code{"::"}.
-For example, @code{"foo"} or @code{"::foo::bar"}.
-
-@item Default Value: The value specified by @code{%name-prefix}, which defaults
-to @code{yy}.
-This usage of @code{%name-prefix} is for backward compatibility and can be
-confusing since @code{%name-prefix} also specifies the textual prefix for the
-lexical analyzer function.
-Thus, if you specify @code{%name-prefix}, it is best to also specify
-@code{%define namespace} so that @code{%name-prefix} @emph{only} affects the
-lexical analyzer function.
-For example, if you specify:
-
-@smallexample
-%define namespace "foo"
-%name-prefix "bar::"
-@end smallexample
+@c ================================================== parse.error
+@deffn Directive {%define parse.error}
+@itemize
+@item Languages(s):
+all
+@item Purpose:
+Control the kind of error messages passed to the error reporting
+function. @xref{Error Reporting, ,The Error Reporting Function
+@code{yyerror}}.
+@item Accepted Values:
+@itemize
+@item @code{simple}
+Error messages passed to @code{yyerror} are simply @w{@code{"syntax
+error"}}.
+@item @code{verbose}
+Error messages report the unexpected token, and possibly the expected ones.
+However, this report can often be incorrect when LAC is not enabled
+(@pxref{LAC}).
+@end itemize
-The parser namespace is @code{foo} and @code{yylex} is referenced as
-@code{bar::lex}.
+@item Default Value:
+@code{simple}
@end itemize
+@end deffn
+@c parse.error
+
@c ================================================== parse.lac
-@item @code{parse.lac}
-@findex %define parse.lac
+@deffn Directive {%define parse.lac}
@itemize
@item Languages(s): C (deterministic parsers only)
@item Accepted Values: @code{none}, @code{full}
@item Default Value: @code{none}
@end itemize
-@end itemize
+@end deffn
+@c parse.lac
+
+@c ================================================== parse.trace
+@deffn Directive {%define parse.trace}
+
+@itemize
+@item Languages(s): C, C++, Java
+
+@item Purpose: Require parser instrumentation for tracing.
+@xref{Tracing, ,Tracing Your Parser}.
+In C/C++, define the macro @code{YYDEBUG} (or @code{@var{prefix}DEBUG} with
+@samp{%define api.prefix @var{prefix}}), see @ref{Multiple Parsers,
+,Multiple Parsers in the Same Program}) to 1 in the parser implementation
+file if it is not already defined, so that the debugging facilities are
+compiled.
+
+@item Accepted Values: Boolean
+
+@item Default Value: @code{false}
+@end itemize
+@end deffn
+@c parse.trace
@node %code Summary
@subsection %code Summary
Not all qualifiers are accepted for all target languages. Unaccepted
qualifiers produce an error. Some of the accepted qualifiers are:
-@itemize @bullet
+@table @code
@item requires
@findex %code requires
@item Language(s): C, C++
@item Purpose: This is the best place to write dependency code required for
-@code{YYSTYPE} and @code{YYLTYPE}.
-In other words, it's the best place to define types referenced in @code{%union}
-directives, and it's the best place to override Bison's default @code{YYSTYPE}
-and @code{YYLTYPE} definitions.
+@code{YYSTYPE} and @code{YYLTYPE}. In other words, it's the best place to
+define types referenced in @code{%union} directives. If you use
+@code{#define} to override Bison's default @code{YYSTYPE} and @code{YYLTYPE}
+definitions, then it is also the best place. However you should rather
+@code{%define} @code{api.value.type} and @code{api.location.type}.
@item Location(s): The parser header file and the parser implementation file
before the Bison-generated @code{YYSTYPE} and @code{YYLTYPE}
@item Location(s): The parser Java file after any Java package directive and
before any class definitions.
@end itemize
-@end itemize
+@end table
Though we say the insertion locations are language-dependent, they are
technically skeleton-dependent. Writers of non-standard skeletons
@code{YYDEBUG} (not renamed) is used as a default value:
@example
-/* Enabling traces. */
+/* Debug traces. */
#ifndef CDEBUG
# if defined YYDEBUG
# if YYDEBUG
parameter information to it in a reentrant way. To do so, use the
declaration @code{%parse-param}:
-@deffn {Directive} %parse-param @{@var{argument-declaration}@}
+@deffn {Directive} %parse-param @{@var{argument-declaration}@} @dots{}
@findex %parse-param
-Declare that an argument declared by the braced-code
-@var{argument-declaration} is an additional @code{yyparse} argument.
+Declare that one or more
+@var{argument-declaration} are additional @code{yyparse} arguments.
The @var{argument-declaration} is used when declaring
functions or prototypes. The last identifier in
@var{argument-declaration} must be the argument name.
Here's an example. Write this in the parser:
@example
-%parse-param @{int *nastiness@}
-%parse-param @{int *randomness@}
+%parse-param @{int *nastiness@} @{int *randomness@}
@end example
@noindent
More user feedback will help to stabilize it.)
You call the function @code{yypush_parse} to parse a single token. This
-function is available if either the @code{%define api.push-pull push} or
-@code{%define api.push-pull both} declaration is used.
+function is available if either the @samp{%define api.push-pull push} or
+@samp{%define api.push-pull both} declaration is used.
@xref{Push Decl, ,A Push Parser}.
-@deftypefun int yypush_parse (yypstate *yyps)
+@deftypefun int yypush_parse (yypstate *@var{yyps})
The value returned by @code{yypush_parse} is the same as for yyparse with
the following exception: it returns @code{YYPUSH_MORE} if more input is
required to finish parsing the grammar.
More user feedback will help to stabilize it.)
You call the function @code{yypull_parse} to parse the rest of the input
-stream. This function is available if the @code{%define api.push-pull both}
+stream. This function is available if the @samp{%define api.push-pull both}
declaration is used.
@xref{Push Decl, ,A Push Parser}.
-@deftypefun int yypull_parse (yypstate *yyps)
+@deftypefun int yypull_parse (yypstate *@var{yyps})
The value returned by @code{yypull_parse} is the same as for @code{yyparse}.
@end deftypefun
More user feedback will help to stabilize it.)
You call the function @code{yypstate_new} to create a new parser instance.
-This function is available if either the @code{%define api.push-pull push} or
-@code{%define api.push-pull both} declaration is used.
+This function is available if either the @samp{%define api.push-pull push} or
+@samp{%define api.push-pull both} declaration is used.
@xref{Push Decl, ,A Push Parser}.
@deftypefun {yypstate*} yypstate_new (void)
More user feedback will help to stabilize it.)
You call the function @code{yypstate_delete} to delete a parser instance.
-function is available if either the @code{%define api.push-pull push} or
-@code{%define api.push-pull both} declaration is used.
+function is available if either the @samp{%define api.push-pull push} or
+@samp{%define api.push-pull both} declaration is used.
@xref{Push Decl, ,A Push Parser}.
-@deftypefun void yypstate_delete (yypstate *yyps)
+@deftypefun void yypstate_delete (yypstate *@var{yyps})
This function will reclaim the memory associated with a parser instance.
After this call, you should no longer attempt to use the parser instance.
@end deftypefun
return 0;
@dots{}
if (c == '+' || c == '-')
- return c; /* Assume token type for `+' is '+'. */
+ return c; /* Assume token type for '+' is '+'. */
@dots{}
return INT; /* Return the type of the token. */
@dots{}
When you are using multiple data types, @code{yylval}'s type is a union
made from the @code{%union} declaration (@pxref{Union Decl, ,The
-Collection of Value Types}). So when you store a token's value, you
+Union Declaration}). So when you store a token's value, you
must use the proper member of the union. If the @code{%union}
declaration looks like this:
this case, omit the second argument; @code{yylex} will be called with
only one argument.
-
-If you wish to pass the additional parameter data to @code{yylex}, use
+If you wish to pass additional arguments to @code{yylex}, use
@code{%lex-param} just like @code{%parse-param} (@pxref{Parser
-Function}).
+Function}). To pass additional arguments to both @code{yylex} and
+@code{yyparse}, use @code{%param}.
-@deffn {Directive} lex-param @{@var{argument-declaration}@}
+@deffn {Directive} %lex-param @{@var{argument-declaration}@} @dots{}
@findex %lex-param
-Declare that the braced-code @var{argument-declaration} is an
-additional @code{yylex} argument declaration.
+Specify that @var{argument-declaration} are additional @code{yylex} argument
+declarations. You may pass one or more such declarations, which is
+equivalent to repeating @code{%lex-param}.
+@end deffn
+
+@deffn {Directive} %param @{@var{argument-declaration}@} @dots{}
+@findex %param
+Specify that @var{argument-declaration} are additional
+@code{yylex}/@code{yyparse} argument declaration. This is equivalent to
+@samp{%lex-param @{@var{argument-declaration}@} @dots{} %parse-param
+@{@var{argument-declaration}@} @dots{}}. You may pass one or more
+declarations, which is equivalent to repeating @code{%param}.
@end deffn
@noindent
For instance:
@example
-%lex-param @{int *nastiness@}
+%lex-param @{scanner_mode *mode@}
+%parse-param @{parser_mode *mode@}
+%param @{environment_type *env@}
@end example
@noindent
-results in the following signature:
+results in the following signatures:
@example
-int yylex (int *nastiness);
+int yylex (scanner_mode *mode, environment_type *env);
+int yyparse (parser_mode *mode, environment_type *env);
+@end example
+
+If @samp{%define api.pure full} is added:
+
+@example
+int yylex (YYSTYPE *lvalp, scanner_mode *mode, environment_type *env);
+int yyparse (parser_mode *mode, environment_type *env);
@end example
@noindent
-If @code{%define api.pure full} (or just @code{%define api.pure}) is added:
+and finally, if both @samp{%define api.pure full} and @code{%locations} are
+used:
@example
-int yylex (YYSTYPE *lvalp, int *nastiness);
+int yylex (YYSTYPE *lvalp, YYLTYPE *llocp,
+ scanner_mode *mode, environment_type *env);
+int yyparse (parser_mode *mode, environment_type *env);
@end example
@node Error Reporting
@cindex parse error
@cindex syntax error
-The Bison parser detects a @dfn{syntax error} or @dfn{parse error}
+The Bison parser detects a @dfn{syntax error} (or @dfn{parse error})
whenever it reads a token which cannot satisfy any syntax rule. An
action in the grammar can also explicitly proclaim an error, using the
macro @code{YYERROR} (@pxref{Action Features, ,Special Features for Use
receives one argument. For a syntax error, the string is normally
@w{@code{"syntax error"}}.
-@findex %error-verbose
-If you invoke the directive @code{%error-verbose} in the Bison declarations
+@findex %define parse.error
+If you invoke @samp{%define parse.error verbose} in the Bison declarations
section (@pxref{Bison Declarations, ,The Bison Declarations Section}), then
Bison provides a more verbose and specific error message string instead of
just plain @w{@code{"syntax error"}}. However, that message sometimes
@end deffn
@deffn {Value} @@$
-@findex @@$
Acts like a structure variable containing information on the textual
location of the grouping made by the current rule. @xref{Tracking
Locations}.
@item
@cindex bison-i18n.m4
Into the directory containing the GNU Autoconf macros used
-by the package---often called @file{m4}---copy the
+by the package ---often called @file{m4}--- copy the
@file{bison-i18n.m4} file installed by Bison under
@samp{share/aclocal/bison-i18n.m4} in Bison's installation directory.
For example:
the conflict:
@example
-@group
%%
-@end group
@group
stmt:
expr
@menu
* Why Precedence:: An example showing why precedence is needed.
-* Using Precedence:: How to specify precedence in Bison grammars.
+* Using Precedence:: How to specify precedence and associativity.
+* Precedence Only:: How to specify precedence only.
* Precedence Examples:: How these features are used in the previous example.
* How Precedence:: How they work.
* Non Operators:: Using precedence for general conflicts.
@node Using Precedence
@subsection Specifying Operator Precedence
@findex %left
-@findex %right
@findex %nonassoc
+@findex %precedence
+@findex %right
Bison allows you to specify these choices with the operator precedence
declarations @code{%left} and @code{%right}. Each such declaration
them right-associative. A third alternative is @code{%nonassoc}, which
declares that it is a syntax error to find the same operator twice ``in a
row''.
+The last alternative, @code{%precedence}, allows to define only
+precedence and no associativity at all. As a result, any
+associativity-related conflict that remains will be reported as an
+compile-time error. The directive @code{%nonassoc} creates run-time
+error: using the operator in a associative way is a syntax error. The
+directive @code{%precedence} creates compile-time errors: an operator
+@emph{can} be involved in an associativity-related conflict, contrary to
+what expected the grammar author.
The relative precedence of different operators is controlled by the
-order in which they are declared. The first @code{%left} or
-@code{%right} declaration in the file declares the operators whose
+order in which they are declared. The first precedence/associativity
+declaration in the file declares the operators whose
precedence is lowest, the next such declaration declares the operators
whose precedence is a little higher, and so on.
+@node Precedence Only
+@subsection Specifying Precedence Only
+@findex %precedence
+
+Since POSIX Yacc defines only @code{%left}, @code{%right}, and
+@code{%nonassoc}, which all defines precedence and associativity, little
+attention is paid to the fact that precedence cannot be defined without
+defining associativity. Yet, sometimes, when trying to solve a
+conflict, precedence suffices. In such a case, using @code{%left},
+@code{%right}, or @code{%nonassoc} might hide future (associativity
+related) conflicts that would remain hidden.
+
+The dangling @code{else} ambiguity (@pxref{Shift/Reduce, , Shift/Reduce
+Conflicts}) can be solved explicitly. This shift/reduce conflicts occurs
+in the following situation, where the period denotes the current parsing
+state:
+
+@example
+if @var{e1} then if @var{e2} then @var{s1} . else @var{s2}
+@end example
+
+The conflict involves the reduction of the rule @samp{IF expr THEN
+stmt}, which precedence is by default that of its last token
+(@code{THEN}), and the shifting of the token @code{ELSE}. The usual
+disambiguation (attach the @code{else} to the closest @code{if}),
+shifting must be preferred, i.e., the precedence of @code{ELSE} must be
+higher than that of @code{THEN}. But neither is expected to be involved
+in an associativity related conflict, which can be specified as follows.
+
+@example
+%precedence THEN
+%precedence ELSE
+@end example
+
+The unary-minus is another typical example where associativity is
+usually over-specified, see @ref{Infix Calc, , Infix Notation
+Calculator: @code{calc}}. The @code{%left} directive is traditionally
+used to declare the precedence of @code{NEG}, which is more than needed
+since it also defines its associativity. While this is harmless in the
+traditional example, who knows how @code{NEG} might be used in future
+evolutions of the grammar@dots{}
+
@node Precedence Examples
@subsection Precedence Examples
@example
@group
-%nonassoc "then"
-%nonassoc "else"
+%precedence "then"
+%precedence "else"
@end group
@end example
@end example
Neither solution is perfect however. Since Bison does not provide, so far,
-support for ``scoped'' precedence, both force you to declare the precedence
+``scoped'' precedence, both force you to declare the precedence
of these keywords with respect to the other operators your grammar.
Therefore, instead of being warned about new conflicts you would be unaware
of (e.g., a shift/reduce conflict due to @samp{if test then 1 else 2 + 3}
sign typically has a very high precedence as a unary operator, and a
somewhat lower precedence (lower than multiplication) as a binary operator.
-The Bison precedence declarations, @code{%left}, @code{%right} and
-@code{%nonassoc}, can only be used once for a given token; so a token has
+The Bison precedence declarations
+can only be used once for a given token; so a token has
only one precedence declared in this way. For context-dependent
precedence, you need to use an additional mechanism: the @code{%prec}
modifier for rules.
@example
@group
sequence:
- /* empty */ @{ printf ("empty sequence\n"); @}
+ %empty @{ printf ("empty sequence\n"); @}
| maybeword
| sequence word @{ printf ("added word %s\n", $2); @}
;
@group
maybeword:
- /* empty */ @{ printf ("empty maybeword\n"); @}
-| word @{ printf ("single word %s\n", $1); @}
+ %empty @{ printf ("empty maybeword\n"); @}
+| word @{ printf ("single word %s\n", $1); @}
;
@end group
@end example
@example
@group
sequence:
- /* empty */ @{ printf ("empty sequence\n"); @}
+ %empty @{ printf ("empty sequence\n"); @}
| sequence word @{ printf ("added word %s\n", $2); @}
;
@end group
Here is another common error that yields a reduce/reduce conflict:
@example
-sequence:
@group
- /* empty */
+sequence:
+ %empty
| sequence words
| sequence redirects
;
@group
words:
- /* empty */
+ %empty
| words word
;
@end group
@group
redirects:
- /* empty */
+ %empty
| redirects redirect
;
@end group
@example
sequence:
- /* empty */
+ %empty
| sequence word
| sequence redirect
;
@example
@group
sequence:
- /* empty */
+ %empty
| sequence words
| sequence redirects
;
rule:
@example
-%nonassoc "word"
-%nonassoc "sequence"
+%precedence "word"
+%precedence "sequence"
%%
@group
sequence:
- /* empty */
+ %empty
| sequence word %prec "sequence"
| sequence redirect %prec "sequence"
;
%%
@group
sequence:
- /* empty */
+ %empty
| sequence word %prec "word"
| sequence redirect %prec "redirect"
;
| name_list ':' type
;
@end group
+
@group
return_spec:
type
| name ':' type
;
@end group
-@group
+
type: "id";
-@end group
+
@group
name: "id";
name_list:
rather than the one for @code{name}.
@example
+@group
param_spec:
type
| name_list ':' type
;
+@end group
+
+@group
return_spec:
type
| "id" ':' type
;
+@end group
@end example
For a more detailed exposition of LALR(1) parsers and parser
historical reasons, but that behavior is often not robust. For example, in
the previous section, we discussed the mysterious conflicts that can be
produced by LALR(1), Bison's default parser table construction algorithm.
-Another example is Bison's @code{%error-verbose} directive, which instructs
-the generated parser to produce verbose syntax error messages, which can
-sometimes contain incorrect information.
+Another example is Bison's @code{%define parse.error verbose} directive,
+which instructs the generated parser to produce verbose syntax error
+messages, which can sometimes contain incorrect information.
In this section, we explore several modern features of Bison that allow you
to tune fundamental aspects of the generated LR-based parsers. Some of
@cindex GLR with LALR
When employing GLR parsers (@pxref{GLR Parsers}), if you do not resolve any
-conflicts statically (for example, with @code{%left} or @code{%prec}), then
+conflicts statically (for example, with @code{%left} or @code{%precedence}),
+then
the parser explores all potential parses of any given input. In this case,
the choice of parser table construction algorithm is guaranteed not to alter
the language accepted by the parser. LALR parser tables are the smallest
@node Default Reductions
@subsection Default Reductions
@cindex default reductions
-@findex %define lr.default-reductions
+@findex %define lr.default-reduction
@findex %nonassoc
After parser table construction, Bison identifies the reduction with the
split the parse instead.
To adjust which states have default reductions enabled, use the
-@code{%define lr.default-reductions} directive.
+@code{%define lr.default-reduction} directive.
-@deffn {Directive} {%define lr.default-reductions} @var{where}
+@deffn {Directive} {%define lr.default-reduction} @var{where}
Specify the kind of states that are permitted to contain default reductions.
The accepted values of @var{where} are:
@itemize
@node Unreachable States
@subsection Unreachable States
-@findex %define lr.keep-unreachable-states
+@findex %define lr.keep-unreachable-state
@cindex unreachable states
If there exists no sequence of transitions from the parser's start state to
keeping unreachable states is sometimes useful when trying to understand the
relationship between the parser and the grammar.
-@deffn {Directive} {%define lr.keep-unreachable-states} @var{value}
+@deffn {Directive} {%define lr.keep-unreachable-state} @var{value}
Request that Bison allow unreachable states to remain in the parser tables.
@var{value} must be a Boolean. The default is @code{false}.
@end deffn
Do not allow @code{YYINITDEPTH} to be greater than @code{YYMAXDEPTH}.
-@c FIXME: C++ output.
-Because of semantic differences between C and C++, the deterministic
-parsers in C produced by Bison cannot grow when compiled
-by C++ compilers. In this precise case (compiling a C parser as C++) you are
-suggested to grow @code{YYINITDEPTH}. The Bison maintainers hope to fix
-this deficiency in a future release.
+You can generate a deterministic parser containing C++ user code from
+the default (C) skeleton, as well as from the C++ skeleton
+(@pxref{C++ Parsers}). However, if you do use the default skeleton
+and want to allow the parsing stack to grow,
+be careful not to use semantic types or location types that require
+non-trivial copy constructors.
+The C skeleton bypasses these constructors when copying data to
+new, larger stacks.
@node Error Recovery
@chapter Error Recovery
@example
stmts:
- /* empty string */
+ %empty
| stmts '\n'
| stmts exp '\n'
| stmts error '\n'
Developing a parser can be a challenge, especially if you don't understand
the algorithm (@pxref{Algorithm, ,The Bison Parser Algorithm}). This
-chapter explains how to generate and read the detailed description of the
-automaton, and how to enable and understand the parser run-time traces.
+chapter explains how understand and debug a parser.
+
+The first sections focus on the static part of the parser: its structure.
+They explain how to generate and read the detailed description of the
+automaton. There are several formats available:
+@itemize @minus
+@item
+as text, see @ref{Understanding, , Understanding Your Parser};
+
+@item
+as a graph, see @ref{Graphviz,, Visualizing Your Parser};
+
+@item
+or as a markup report that can be turned, for instance, into HTML, see
+@ref{Xml,, Visualizing your parser in multiple formats}.
+@end itemize
+
+The last section focuses on the dynamic part of the parser: how to enable
+and understand the parser run-time traces (@pxref{Tracing, ,Tracing Your
+Parser}).
@menu
* Understanding:: Understanding the structure of your parser.
As documented elsewhere (@pxref{Algorithm, ,The Bison Parser Algorithm})
Bison parsers are @dfn{shift/reduce automata}. In some cases (much more
frequent than one would hope), looking at this automaton is required to
-tune or simply fix a parser. Bison provides two different
-representation of it, either textually or graphically (as a DOT file).
+tune or simply fix a parser.
The textual file is generated when the options @option{--report} or
@option{--verbose} are specified, see @ref{Invocation, , Invoking
@example
%token NUM STR
+@group
%left '+' '-'
%left '*'
+@end group
%%
+@group
exp:
exp '+' exp
| exp '-' exp
| exp '/' exp
| NUM
;
+@end group
useless: STR;
%%
@end example
@example
calc.y: warning: 1 nonterminal useless in grammar
calc.y: warning: 1 rule useless in grammar
-calc.y:11.1-7: warning: nonterminal useless in grammar: useless
-calc.y:11.10-12: warning: rule useless in grammar: useless: STR
+calc.y:12.1-7: warning: nonterminal useless in grammar: useless
+calc.y:12.10-12: warning: rule useless in grammar: useless: STR
calc.y: conflicts: 7 shift/reduce
@end example
the location of the input cursor.
@example
-state 0
+State 0
0 $accept: . exp $end
@option{--report=itemset} to list the derived items as well:
@example
-state 0
+State 0
0 $accept: . exp $end
1 exp: . exp '+' exp
In the state 1@dots{}
@example
-state 1
+State 1
5 exp: NUM .
@noindent
the rule 5, @samp{exp: NUM;}, is completed. Whatever the lookahead token
(@samp{$default}), the parser will reduce it. If it was coming from
-state 0, then, after this reduction it will return to state 0, and will
+State 0, then, after this reduction it will return to state 0, and will
jump to state 2 (@samp{exp: go to state 2}).
@example
-state 2
+State 2
0 $accept: exp . $end
1 exp: exp . '+' exp
state}:
@example
-state 3
+State 3
0 $accept: exp $end .
the reader.
@example
-state 4
+State 4
1 exp: exp '+' . exp
exp go to state 8
-state 5
+State 5
2 exp: exp '-' . exp
exp go to state 9
-state 6
+State 6
3 exp: exp '*' . exp
exp go to state 10
-state 7
+State 7
4 exp: exp '/' . exp
1 shift/reduce}:
@example
-state 8
+State 8
1 exp: exp . '+' exp
1 | exp '+' exp .
@option{--report=lookahead}, Bison specifies these lookahead tokens:
@example
-state 8
+State 8
1 exp: exp . '+' exp
1 | exp '+' exp . [$end, '+', '-', '/']
@example
@group
-state 9
+State 9
1 exp: exp . '+' exp
2 | exp . '-' exp
@end group
@group
-state 10
+State 10
1 exp: exp . '+' exp
2 | exp . '-' exp
@end group
@group
-state 11
+State 11
1 exp: exp . '+' exp
2 | exp . '-' exp
@noindent
Observe that state 11 contains conflicts not only due to the lack of
-precedence of @samp{/} with respect to @samp{+}, @samp{-}, and
-@samp{*}, but also because the
-associativity of @samp{/} is not specified.
+precedence of @samp{/} with respect to @samp{+}, @samp{-}, and @samp{*}, but
+also because the associativity of @samp{/} is not specified.
-Note that Bison may also produce an HTML version of this output, via an XML
-file and XSLT processing (@pxref{Xml}).
+Bison may also produce an HTML version of this output, via an XML file and
+XSLT processing (@pxref{Xml,,Visualizing your parser in multiple formats}).
@c ================================================= Graphical Representation
(@pxref{Invocation, , Invoking Bison}). Its name is made by removing
@samp{.tab.c} or @samp{.c} from the parser implementation file name, and
adding @samp{.dot} instead. If the grammar file is @file{foo.y}, the
-Graphviz output file is called @file{foo.dot}.
+Graphviz output file is called @file{foo.dot}. A DOT file may also be
+produced via an XML file and XSLT processing (@pxref{Xml,,Visualizing your
+parser in multiple formats}).
+
The following grammar file, @file{rr.y}, will be used in the sequel:
@end group
@end example
-The graphical output is very similar to the textual one, and as such it is
-easier understood by making direct comparisons between them. See
-@ref{Debugging, , Debugging Your Parser} for a detailled analysis of the
-textual report.
+The graphical output
+@ifnotinfo
+(see @ref{fig:graph})
+@end ifnotinfo
+is very similar to the textual one, and as such it is easier understood by
+making direct comparisons between them. @xref{Debugging, , Debugging Your
+Parser}, for a detailled analysis of the textual report.
+
+@ifnotinfo
+@float Figure,fig:graph
+@image{figs/example, 430pt}
+@caption{A graphical rendering of the parser.}
+@end float
+@end ifnotinfo
@subheading Graphical Representation of States
@example
@group
-state 3
+State 3
1 exp: a . ";"
This is how reductions are represented in the verbose file @file{rr.output}:
@example
-state 1
+State 1
3 a: "0" . [";"]
4 b: "0" . ["."]
are distinguished by a red filling color on these nodes, just like how they are
reported between square brackets in the verbose file.
-The reduction corresponding to the rule number 0 is the acceptation state. It
-is shown as a blue diamond, labelled "Acc".
+The reduction corresponding to the rule number 0 is the acceptation
+state. It is shown as a blue diamond, labelled ``Acc''.
@subheading Graphical representation of go tos
The @samp{go to} jump transitions are represented as dotted lines bearing
the name of the rule being jumped to.
-Note that a DOT file may also be produced via an XML file and XSLT
-processing (@pxref{Xml}).
-
@c ================================================= XML
@node Xml
@cindex xml
Bison supports two major report formats: textual output
-(@pxref{Understanding}) when invoked with option @option{--verbose}, and DOT
-(@pxref{Graphviz}) when invoked with option @option{--graph}. However,
+(@pxref{Understanding, ,Understanding Your Parser}) when invoked
+with option @option{--verbose}, and DOT
+(@pxref{Graphviz,, Visualizing Your Parser}) when invoked with
+option @option{--graph}. However,
another alternative is to output an XML file that may then be, with
@command{xsltproc}, rendered as either a raw text format equivalent to the
verbose file, or as an HTML version of the same file, with clickable
XSLT have no difference whatsoever with those obtained by invoking
@command{bison} with options @option{--verbose} or @option{--graph}.
-The textual file is generated when the options @option{-x} or
+The XML file is generated when the options @option{-x} or
@option{--xml[=FILE]} are specified, see @ref{Invocation,,Invoking Bison}.
If not specified, its name is made by removing @samp{.tab.c} or @samp{.c}
from the parser implementation file name, and adding @samp{.xml} instead.
@item xml2dot.xsl
Used to output a copy of the DOT visualization of the automaton.
@item xml2text.xsl
-Used to output a copy of the .output file.
+Used to output a copy of the @samp{.output} file.
@item xml2xhtml.xsl
-Used to output an xhtml enhancement of the .output file.
+Used to output an xhtml enhancement of the @samp{.output} file.
@end table
-Sample usage (requires @code{xsltproc}):
+Sample usage (requires @command{xsltproc}):
@example
-$ bison -x input.y
+$ bison -x gr.y
@group
$ bison --print-datadir
/usr/local/share/bison
@end group
-$ xsltproc /usr/local/share/bison/xslt/xml2xhtml.xsl input.xml > input.html
+$ xsltproc /usr/local/share/bison/xslt/xml2xhtml.xsl gr.xml >gr.html
@end example
@c ================================================= Tracing
@item the directive @samp{%debug}
@findex %debug
Add the @code{%debug} directive (@pxref{Decl Summary, ,Bison Declaration
-Summary}). This is a Bison extension, especially useful for languages that
-don't use a preprocessor. Unless POSIX and Yacc portability matter to you,
-this is the preferred solution.
+Summary}). This Bison extension is maintained for backward
+compatibility with previous versions of Bison.
+
+@item the variable @samp{parse.trace}
+@findex %define parse.trace
+Add the @samp{%define parse.trace} directive (@pxref{%define
+Summary,,parse.trace}), or pass the @option{-Dparse.trace} option
+(@pxref{Bison Options}). This is a Bison extension, which is especially
+useful for languages that don't use a preprocessor. Unless POSIX and Yacc
+portability matter to you, this is the preferred solution.
@end table
-We suggest that you always enable the debug option so that debugging is
+We suggest that you always enable the trace option so that debugging is
always possible.
@findex YYFPRINTF
/* Formatting semantic values. */
%printer @{ fprintf (yyoutput, "%s", $$->name); @} VAR;
%printer @{ fprintf (yyoutput, "%s()", $$->name); @} FNCT;
-%printer @{ fprintf (yyoutput, "%g", $$); @} <val>;
+%printer @{ fprintf (yyoutput, "%g", $$); @} <double>;
@end example
The @code{%define} directive instructs Bison to generate run-time trace
The set of @code{%printer} directives demonstrates how to format the
semantic value in the traces. Note that the specification can be done
either on the symbol type (e.g., @code{VAR} or @code{FNCT}), or on the type
-tag: since @code{<val>} is the type for both @code{NUM} and @code{exp}, this
-printer will be used for them.
+tag: since @code{<double>} is the type for both @code{NUM} and @code{exp},
+this printer will be used for them.
Here is a sample of the information provided by run-time traces. The traces
are sent onto standard error.
@noindent
The previous reduction demonstrates the @code{%printer} directive for
-@code{<val>}: both the token @code{NUM} and the resulting non-terminal
+@code{<double>}: both the token @code{NUM} and the resulting nonterminal
@code{exp} have @samp{1} as value.
@example
short option. It is followed by a cross key alphabetized by long
option.
-@c Please, keep this ordered as in `bison --help'.
+@c Please, keep this ordered as in 'bison --help'.
@noindent
Operations modes:
@table @option
conflicts is not reported, so @option{-W} and @option{--warning} then have
no effect on the conflict report.
+@item deprecated
+Deprecated constructs whose support will be removed in future versions of
+Bison.
+
+@item empty-rule
+Empty rules without @code{%empty}. @xref{Empty Rules}. Disabled by
+default, but enabled by uses of @code{%empty}, unless
+@option{-Wno-empty-rule} was specified.
+
+@item precedence
+Useless precedence and associativity directives. Disabled by default.
+
+Consider for instance the following grammar:
+
+@example
+@group
+%nonassoc "="
+%left "+"
+%left "*"
+%precedence "("
+@end group
+%%
+@group
+stmt:
+ exp
+| "var" "=" exp
+;
+@end group
+
+@group
+exp:
+ exp "+" exp
+| exp "*" "num"
+| "(" exp ")"
+| "num"
+;
+@end group
+@end example
+
+Bison reports:
+
+@c cannot leave the location and the [-Wprecedence] for lack of
+@c width in PDF.
+@example
+@group
+warning: useless precedence and associativity for "="
+ %nonassoc "="
+ ^^^
+@end group
+@group
+warning: useless associativity for "*", use %precedence
+ %left "*"
+ ^^^
+@end group
+@group
+warning: useless precedence for "("
+ %precedence "("
+ ^^^
+@end group
+@end example
+
+One would get the exact same parser with the following directives instead:
+
+@example
+@group
+%left "+"
+%precedence "*"
+@end group
+@end example
+
@item other
All warnings not categorized above. These warnings are enabled by default.
categories.
@item all
-All the warnings.
+All the warnings except @code{yacc}.
+
@item none
Turn off all the warnings.
+
@item error
-Treat warnings as errors.
+See @option{-Werror}, below.
@end table
A category can be turned off by prefixing its name with @samp{no-}. For
instance, @option{-Wno-yacc} will hide the warnings about
POSIX Yacc incompatibilities.
+
+@item -Werror[=@var{category}]
+@itemx -Wno-error[=@var{category}]
+Enable warnings falling in @var{category}, and treat them as errors. If no
+@var{category} is given, it defaults to making all enabled warnings into errors.
+
+@var{category} is the same as for @option{--warnings}, with the exception that
+it may not be prefixed with @samp{no-} (see above).
+
+Prefixed with @samp{no}, it deactivates the error treatment for this
+@var{category}. However, the warning itself won't be disabled, or enabled, by
+this option.
+
+Note that the precedence of the @samp{=} and @samp{,} operators is such that
+the following commands are @emph{not} equivalent, as the first will not treat
+S/R conflicts as errors.
+
+@example
+$ bison -Werror=yacc,conflicts-sr input.y
+$ bison -Werror=yacc,error=conflicts-sr input.y
+@end example
+
+@item -f [@var{feature}]
+@itemx --feature[=@var{feature}]
+Activate miscellaneous @var{feature}. @var{feature} can be one of:
+@table @code
+@item caret
+@itemx diagnostics-show-caret
+Show caret errors, in a manner similar to GCC's
+@option{-fdiagnostics-show-caret}, or Clang's @option{-fcaret-diagnotics}. The
+location provided with the message is used to quote the corresponding line of
+the source file, underlining the important part of it with carets (^). Here is
+an example, using the following file @file{in.y}:
+
+@example
+%type <ival> exp
+%%
+exp: exp '+' exp @{ $exp = $1 + $2; @};
+@end example
+
+When invoked with @option{-fcaret} (or nothing), Bison will report:
+
+@example
+@group
+in.y:3.20-23: error: ambiguous reference: '$exp'
+ exp: exp '+' exp @{ $exp = $1 + $2; @};
+ ^^^^
+@end group
+@group
+in.y:3.1-3: refers to: $exp at $$
+ exp: exp '+' exp @{ $exp = $1 + $2; @};
+ ^^^
+@end group
+@group
+in.y:3.6-8: refers to: $exp at $1
+ exp: exp '+' exp @{ $exp = $1 + $2; @};
+ ^^^
+@end group
+@group
+in.y:3.14-16: refers to: $exp at $3
+ exp: exp '+' exp @{ $exp = $1 + $2; @};
+ ^^^
+@end group
+@group
+in.y:3.32-33: error: $2 of 'exp' has no declared type
+ exp: exp '+' exp @{ $exp = $1 + $2; @};
+ ^^
+@end group
+@end example
+
+Whereas, when invoked with @option{-fno-caret}, Bison will only report:
+
+@example
+@group
+in.y:3.20-23: error: ambiguous reference: ‘$exp’
+in.y:3.1-3: refers to: $exp at $$
+in.y:3.6-8: refers to: $exp at $1
+in.y:3.14-16: refers to: $exp at $3
+in.y:3.32-33: error: $2 of ‘exp’ has no declared type
+@end group
+@end example
+
+This option is activated by default.
+
+@end table
@end table
@noindent
Summary}). Currently supported languages include C, C++, and Java.
@var{language} is case-insensitive.
-This option is experimental and its effect may be modified in future
-releases.
-
@item --locations
Pretend that @code{%locations} was specified. @xref{Decl Summary}.
When run, @command{bison} will create several entities in the @samp{yy}
namespace.
-@findex %define namespace
-Use the @samp{%define namespace} directive to change the namespace
-name, see @ref{%define Summary,,namespace}. The various classes are
-generated in the following files:
+@findex %define api.namespace
+Use the @samp{%define api.namespace} directive to change the namespace name,
+see @ref{%define Summary,,api.namespace}. The various classes are generated
+in the following files:
@table @file
@item position.hh
@itemx location.hh
The definition of the classes @code{position} and @code{location}, used for
-location tracking. These files are not generated if the @code{%define}
-variable @code{api.location.type} is defined. @xref{C++ Location Values}.
+location tracking when enabled. These files are not generated if the
+@code{%define} variable @code{api.location.type} is defined. @xref{C++
+Location Values}.
@item stack.hh
An auxiliary class @code{stack} used by the parser.
@c - YYSTYPE
@c - Printer and destructor
+Bison supports two different means to handle semantic values in C++. One is
+alike the C interface, and relies on unions (@pxref{C++ Unions}). As C++
+practitioners know, unions are inconvenient in C++, therefore another
+approach is provided, based on variants (@pxref{C++ Variants}).
+
+@menu
+* C++ Unions:: Semantic values cannot be objects
+* C++ Variants:: Using objects as semantic values
+@end menu
+
+@node C++ Unions
+@subsubsection C++ Unions
+
The @code{%union} directive works as for C, see @ref{Union Decl, ,The
-Collection of Value Types}. In particular it produces a genuine
-@code{union}@footnote{In the future techniques to allow complex types
-within pseudo-unions (similar to Boost variants) might be implemented to
-alleviate these issues.}, which have a few specific features in C++.
+Union Declaration}. In particular it produces a genuine
+@code{union}, which have a few specific features in C++.
@itemize @minus
@item
The type @code{YYSTYPE} is defined but its use is discouraged: rather
only means to avoid leaks. @xref{Destructor Decl, , Freeing Discarded
Symbols}.
+@node C++ Variants
+@subsubsection C++ Variants
+
+Bison provides a @emph{variant} based implementation of semantic values for
+C++. This alleviates all the limitations reported in the previous section,
+and in particular, object types can be used without pointers.
+
+To enable variant-based semantic values, set @code{%define} variable
+@code{variant} (@pxref{%define Summary,, variant}). Once this defined,
+@code{%union} is ignored, and instead of using the name of the fields of the
+@code{%union} to ``type'' the symbols, use genuine types.
+
+For instance, instead of
+
+@example
+%union
+@{
+ int ival;
+ std::string* sval;
+@}
+%token <ival> NUMBER;
+%token <sval> STRING;
+@end example
+
+@noindent
+write
+
+@example
+%token <int> NUMBER;
+%token <std::string> STRING;
+@end example
+
+@code{STRING} is no longer a pointer, which should fairly simplify the user
+actions in the grammar and in the scanner (in particular the memory
+management).
+
+Since C++ features destructors, and since it is customary to specialize
+@code{operator<<} to support uniform printing of values, variants also
+typically simplify Bison printers and destructors.
+
+Variants are stricter than unions. When based on unions, you may play any
+dirty game with @code{yylval}, say storing an @code{int}, reading a
+@code{char*}, and then storing a @code{double} in it. This is no longer
+possible with variants: they must be initialized, then assigned to, and
+eventually, destroyed.
+
+@deftypemethod {semantic_type} {T&} build<T> ()
+Initialize, but leave empty. Returns the address where the actual value may
+be stored. Requires that the variant was not initialized yet.
+@end deftypemethod
+
+@deftypemethod {semantic_type} {T&} build<T> (const T& @var{t})
+Initialize, and copy-construct from @var{t}.
+@end deftypemethod
+
+
+@strong{Warning}: We do not use Boost.Variant, for two reasons. First, it
+appeared unacceptable to require Boost on the user's machine (i.e., the
+machine on which the generated parser will be compiled, not the machine on
+which @command{bison} was run). Second, for each possible semantic value,
+Boost.Variant not only stores the value, but also a tag specifying its
+type. But the parser already ``knows'' the type of the semantic value, so
+that would be duplicating the information.
+
+Therefore we developed light-weight variants whose type tag is external (so
+they are really like @code{unions} for C++ actually). But our code is much
+less mature that Boost.Variant. So there is a number of limitations in
+(the current implementation of) variants:
+@itemize
+@item
+Alignment must be enforced: values should be aligned in memory according to
+the most demanding type. Computing the smallest alignment possible requires
+meta-programming techniques that are not currently implemented in Bison, and
+therefore, since, as far as we know, @code{double} is the most demanding
+type on all platforms, alignments are enforced for @code{double} whatever
+types are actually used. This may waste space in some cases.
+
+@item
+There might be portability issues we are not aware of.
+@end itemize
+
+As far as we know, these limitations @emph{can} be alleviated. All it takes
+is some time and/or some talented C++ hacker willing to contribute to Bison.
@node C++ Location Values
@subsection C++ Location Values
genuine code only the latter is used.
@menu
-* C++ position:: One point in the source file
-* C++ location:: Two points in the source file
+* C++ position:: One point in the source file
+* C++ location:: Two points in the source file
* User Defined Location Type:: Required interface for locations
@end menu
The line, starting at 1.
@end deftypeivar
-@deftypemethod {position} {uint} lines (int @var{height} = 1)
-Advance by @var{height} lines, resetting the column number.
+@deftypemethod {position} {void} lines (int @var{height} = 1)
+If @var{height} is not null, advance by @var{height} lines, resetting the
+column number. The resulting line number cannot be less than 1.
@end deftypemethod
@deftypeivar {position} {uint} column
The column, starting at 1.
@end deftypeivar
-@deftypemethod {position} {uint} columns (int @var{width} = 1)
-Advance by @var{width} columns, without changing the line number.
+@deftypemethod {position} {void} columns (int @var{width} = 1)
+Advance by @var{width} columns, without changing the line number. The
+resulting column number cannot be less than 1.
@end deftypemethod
@deftypemethod {position} {position&} operator+= (int @var{width})
The first, inclusive, position of the range, and the first beyond.
@end deftypeivar
-@deftypemethod {location} {uint} columns (int @var{width} = 1)
-@deftypemethodx {location} {uint} lines (int @var{height} = 1)
-Advance the @code{end} position.
+@deftypemethod {location} {void} columns (int @var{width} = 1)
+@deftypemethodx {location} {void} lines (int @var{height} = 1)
+Forwarded to the @code{end} position.
@end deftypemethod
@deftypemethod {location} {location} operator+ (const location& @var{end})
@deftypemethodx {location} {location} operator+ (int @var{width})
@deftypemethodx {location} {location} operator+= (int @var{width})
+@deftypemethodx {location} {location} operator- (int @var{width})
+@deftypemethodx {location} {location} operator-= (int @var{width})
Various forms of syntactic sugar.
@end deftypemethod
@defcv {Type} {parser} {semantic_type}
@defcvx {Type} {parser} {location_type}
-The types for semantics value and locations.
+The types for semantic values and locations (if enabled).
@end defcv
@defcv {Type} {parser} {token}
(@pxref{Calc++ Scanner}).
@end defcv
+@defcv {Type} {parser} {syntax_error}
+This class derives from @code{std::runtime_error}. Throw instances of it
+from the scanner or from the user actions to raise parse errors. This is
+equivalent with first
+invoking @code{error} to report the location and message of the syntax
+error, and then to invoke @code{YYERROR} to enter the error-recovery mode.
+But contrary to @code{YYERROR} which can only be invoked from user actions
+(i.e., written in the action itself), the exception can be thrown from
+function invoked from the user action.
+@end defcv
+
@deftypemethod {parser} {} parser (@var{type1} @var{arg1}, ...)
Build a new parser object. There are no arguments by default, unless
@samp{%parse-param @{@var{type1} @var{arg1}@}} was used.
@end deftypemethod
+@deftypemethod {syntax_error} {} syntax_error (const location_type& @var{l}, const std::string& @var{m})
+@deftypemethodx {syntax_error} {} syntax_error (const std::string& @var{m})
+Instantiate a syntax-error exception.
+@end deftypemethod
+
@deftypemethod {parser} {int} parse ()
Run the syntactic analysis, and return 0 on success, 1 otherwise.
@end deftypemethod
@deftypemethod {parser} {void} error (const location_type& @var{l}, const std::string& @var{m})
+@deftypemethodx {parser} {void} error (const std::string& @var{m})
The definition for this member function must be supplied by the user:
the parser uses it to report a parser error occurring at @var{l},
-described by @var{m}.
+described by @var{m}. If location tracking is not enabled, the second
+signature is used.
@end deftypemethod
The parser invokes the scanner by calling @code{yylex}. Contrary to C
parsers, C++ parsers are always pure: there is no point in using the
-@code{%define api.pure full} directive. Therefore the interface is as follows.
+@samp{%define api.pure} directive. The actual interface with @code{yylex}
+depends whether you use unions, or variants.
+
+@menu
+* Split Symbols:: Passing symbols as two/three components
+* Complete Symbols:: Making symbols a whole
+@end menu
+
+@node Split Symbols
+@subsubsection Split Symbols
+
+The interface is as follows.
@deftypemethod {parser} {int} yylex (semantic_type* @var{yylval}, location_type* @var{yylloc}, @var{type1} @var{arg1}, ...)
-Return the next token. Its type is the return value, its semantic
-value and location being @var{yylval} and @var{yylloc}. Invocations of
+@deftypemethodx {parser} {int} yylex (semantic_type* @var{yylval}, @var{type1} @var{arg1}, ...)
+Return the next token. Its type is the return value, its semantic value and
+location (if enabled) being @var{yylval} and @var{yylloc}. Invocations of
@samp{%lex-param @{@var{type1} @var{arg1}@}} yield additional arguments.
@end deftypemethod
+Note that when using variants, the interface for @code{yylex} is the same,
+but @code{yylval} is handled differently.
+
+Regular union-based code in Lex scanner typically look like:
+
+@example
+[0-9]+ @{
+ yylval.ival = text_to_int (yytext);
+ return yy::parser::INTEGER;
+ @}
+[a-z]+ @{
+ yylval.sval = new std::string (yytext);
+ return yy::parser::IDENTIFIER;
+ @}
+@end example
+
+Using variants, @code{yylval} is already constructed, but it is not
+initialized. So the code would look like:
+
+@example
+[0-9]+ @{
+ yylval.build<int>() = text_to_int (yytext);
+ return yy::parser::INTEGER;
+ @}
+[a-z]+ @{
+ yylval.build<std::string> = yytext;
+ return yy::parser::IDENTIFIER;
+ @}
+@end example
+
+@noindent
+or
+
+@example
+[0-9]+ @{
+ yylval.build(text_to_int (yytext));
+ return yy::parser::INTEGER;
+ @}
+[a-z]+ @{
+ yylval.build(yytext);
+ return yy::parser::IDENTIFIER;
+ @}
+@end example
+
+
+@node Complete Symbols
+@subsubsection Complete Symbols
+
+If you specified both @code{%define api.value.type variant} and
+@code{%define api.token.constructor},
+the @code{parser} class also defines the class @code{parser::symbol_type}
+which defines a @emph{complete} symbol, aggregating its type (i.e., the
+traditional value returned by @code{yylex}), its semantic value (i.e., the
+value passed in @code{yylval}, and possibly its location (@code{yylloc}).
+
+@deftypemethod {symbol_type} {} symbol_type (token_type @var{type}, const semantic_type& @var{value}, const location_type& @var{location})
+Build a complete terminal symbol which token type is @var{type}, and which
+semantic value is @var{value}. If location tracking is enabled, also pass
+the @var{location}.
+@end deftypemethod
+
+This interface is low-level and should not be used for two reasons. First,
+it is inconvenient, as you still have to build the semantic value, which is
+a variant, and second, because consistency is not enforced: as with unions,
+it is still possible to give an integer as semantic value for a string.
+
+So for each token type, Bison generates named constructors as follows.
+
+@deftypemethod {symbol_type} {} make_@var{token} (const @var{value_type}& @var{value}, const location_type& @var{location})
+@deftypemethodx {symbol_type} {} make_@var{token} (const location_type& @var{location})
+Build a complete terminal symbol for the token type @var{token} (not
+including the @code{api.token.prefix}) whose possible semantic value is
+@var{value} of adequate @var{value_type}. If location tracking is enabled,
+also pass the @var{location}.
+@end deftypemethod
+
+For instance, given the following declarations:
+
+@example
+%define api.token.prefix @{TOK_@}
+%token <std::string> IDENTIFIER;
+%token <int> INTEGER;
+%token COLON;
+@end example
+
+@noindent
+Bison generates the following functions:
+
+@example
+symbol_type make_IDENTIFIER(const std::string& v,
+ const location_type& l);
+symbol_type make_INTEGER(const int& v,
+ const location_type& loc);
+symbol_type make_COLON(const location_type& loc);
+@end example
+
+@noindent
+which should be used in a Lex-scanner as follows.
+
+@example
+[0-9]+ return yy::parser::make_INTEGER(text_to_int (yytext), loc);
+[a-z]+ return yy::parser::make_IDENTIFIER(yytext, loc);
+":" return yy::parser::make_COLON(loc);
+@end example
+
+Tokens that do not have an identifier are not accessible: you cannot simply
+use characters such as @code{':'}, they must be declared with @code{%token}.
@node A Complete C++ Example
@subsection A Complete C++ Example
This section demonstrates the use of a C++ parser with a simple but
complete example. This example should be available on your system,
-ready to compile, in the directory @dfn{../bison/examples/calc++}. It
+ready to compile, in the directory @dfn{.../bison/examples/calc++}. It
focuses on the use of Bison, therefore the design of the various C++
classes is very naive: no accessors, no encapsulation of members etc.
We will use a Lex scanner, and more precisely, a Flex scanner, to
-demonstrate the various interaction. A hand written scanner is
+demonstrate the various interactions. A hand-written scanner is
actually easier to interface with.
@menu
@comment file: calc++-driver.hh
@example
// Tell Flex the lexer's prototype ...
-# define YY_DECL \
- yy::calcxx_parser::token_type \
- yylex (yy::calcxx_parser::semantic_type* yylval, \
- yy::calcxx_parser::location_type* yylloc, \
- calcxx_driver& driver)
+# define YY_DECL \
+ yy::calcxx_parser::symbol_type yylex (calcxx_driver& driver)
// ... and declare it for the parser's sake.
YY_DECL;
@end example
@end example
@noindent
-To encapsulate the coordination with the Flex scanner, it is useful to
-have two members function to open and close the scanning phase.
+To encapsulate the coordination with the Flex scanner, it is useful to have
+member functions to open and close the scanning phase.
@comment file: calc++-driver.hh
@example
@comment file: calc++-driver.hh
@example
- // Run the parser. Return 0 on success.
+ // Run the parser on file F.
+ // Return 0 on success.
int parse (const std::string& f);
+ // The name of the file being parsed.
+ // Used later to pass the file name to the location tracker.
std::string file;
+ // Whether parser traces should be generated.
bool trace_parsing;
@end example
%define parser_class_name "calcxx_parser"
@end example
+@noindent
+@findex %define api.token.constructor
+@findex %define api.value.type variant
+This example will use genuine C++ objects as semantic values, therefore, we
+require the variant-based interface. To make sure we properly use it, we
+enable assertions. To fully benefit from type-safety and more natural
+definition of ``symbol'', we enable @code{api.token.constructor}.
+
+@comment file: calc++-parser.yy
+@example
+%define api.token.constructor
+%define api.value.type variant
+%define parse.assert
+@end example
+
@noindent
@findex %code requires
-Then come the declarations/inclusions needed to define the
-@code{%union}. Because the parser uses the parsing driver and
-reciprocally, both cannot include the header of the other. Because the
+Then come the declarations/inclusions needed by the semantic values.
+Because the parser uses the parsing driver and reciprocally, both would like
+to include the header of the other, which is, of course, insane. This
+mutual dependency will be broken using forward declarations. Because the
driver's header needs detailed knowledge about the parser class (in
-particular its inner types), it is the parser's header which will simply
-use a forward declaration of the driver.
-@xref{%code Summary}.
+particular its inner types), it is the parser's header which will use a
+forward declaration of the driver. @xref{%code Summary}.
@comment file: calc++-parser.yy
@example
-%code requires @{
+%code requires
+@{
# include <string>
class calcxx_driver;
@}
@comment file: calc++-parser.yy
@example
// The parsing context.
-%parse-param @{ calcxx_driver& driver @}
-%lex-param @{ calcxx_driver& driver @}
+%param @{ calcxx_driver& driver @}
@end example
@noindent
-Then we request the location tracking feature, and initialize the
+Then we request location tracking, and initialize the
first location's file name. Afterward new locations are computed
relatively to the previous locations: the file name will be
-automatically propagated.
+propagated.
@comment file: calc++-parser.yy
@example
@end example
@noindent
-Use the two following directives to enable parser tracing and verbose error
+Use the following two directives to enable parser tracing and verbose error
messages. However, verbose error messages can contain incorrect information
(@pxref{LAC}).
@comment file: calc++-parser.yy
@example
-%debug
-%error-verbose
-@end example
-
-@noindent
-Semantic values cannot use ``real'' objects, but only pointers to
-them.
-
-@comment file: calc++-parser.yy
-@example
-// Symbols.
-%union
-@{
- int ival;
- std::string *sval;
-@};
+%define parse.trace
+%define parse.error verbose
@end example
@noindent
@comment file: calc++-parser.yy
@example
-%code @{
+%code
+@{
# include "calc++-driver.hh"
@}
@end example
@noindent
The token numbered as 0 corresponds to end of file; the following line
-allows for nicer error messages referring to ``end of file'' instead
-of ``$end''. Similarly user friendly named are provided for each
-symbol. Note that the tokens names are prefixed by @code{TOKEN_} to
-avoid name clashes.
+allows for nicer error messages referring to ``end of file'' instead of
+``$end''. Similarly user friendly names are provided for each symbol. To
+avoid name clashes in the generated files (@pxref{Calc++ Scanner}), prefix
+tokens with @code{TOK_} (@pxref{%define Summary,,api.token.prefix}).
@comment file: calc++-parser.yy
@example
-%token END 0 "end of file"
-%token ASSIGN ":="
-%token <sval> IDENTIFIER "identifier"
-%token <ival> NUMBER "number"
-%type <ival> exp
+%define api.token.prefix @{TOK_@}
+%token
+ END 0 "end of file"
+ ASSIGN ":="
+ MINUS "-"
+ PLUS "+"
+ STAR "*"
+ SLASH "/"
+ LPAREN "("
+ RPAREN ")"
+;
@end example
@noindent
-To enable memory deallocation during error recovery, use
-@code{%destructor}.
+Since we use variant-based semantic values, @code{%union} is not used, and
+both @code{%type} and @code{%token} expect genuine types, as opposed to type
+tags.
-@c FIXME: Document %printer, and mention that it takes a braced-code operand.
@comment file: calc++-parser.yy
@example
-%printer @{ yyoutput << *$$; @} "identifier"
-%destructor @{ delete $$; @} "identifier"
+%token <std::string> IDENTIFIER "identifier"
+%token <int> NUMBER "number"
+%type <int> exp
+@end example
+
+@noindent
+No @code{%destructor} is needed to enable memory deallocation during error
+recovery; the memory, for strings for instance, will be reclaimed by the
+regular destructors. All the values are printed using their
+@code{operator<<} (@pxref{Printer Decl, , Printing Semantic Values}).
-%printer @{ yyoutput << $$; @} <ival>
+@comment file: calc++-parser.yy
+@example
+%printer @{ yyoutput << $$; @} <*>;
@end example
@noindent
-The grammar itself is straightforward.
+The grammar itself is straightforward (@pxref{Location Tracking Calc, ,
+Location Tracking Calculator: @code{ltcalc}}).
@comment file: calc++-parser.yy
@example
unit: assignments exp @{ driver.result = $2; @};
assignments:
- /* Nothing. */ @{@}
+ %empty @{@}
| assignments assignment @{@};
assignment:
- "identifier" ":=" exp
- @{ driver.variables[*$1] = $3; delete $1; @};
-
-%left '+' '-';
-%left '*' '/';
-exp: exp '+' exp @{ $$ = $1 + $3; @}
- | exp '-' exp @{ $$ = $1 - $3; @}
- | exp '*' exp @{ $$ = $1 * $3; @}
- | exp '/' exp @{ $$ = $1 / $3; @}
- | "identifier" @{ $$ = driver.variables[*$1]; delete $1; @}
- | "number" @{ $$ = $1; @};
+ "identifier" ":=" exp @{ driver.variables[$1] = $3; @};
+
+%left "+" "-";
+%left "*" "/";
+exp:
+ exp "+" exp @{ $$ = $1 + $3; @}
+| exp "-" exp @{ $$ = $1 - $3; @}
+| exp "*" exp @{ $$ = $1 * $3; @}
+| exp "/" exp @{ $$ = $1 / $3; @}
+| "(" exp ")" @{ std::swap ($$, $2); @}
+| "identifier" @{ $$ = driver.variables[$1]; @}
+| "number" @{ std::swap ($$, $1); @};
%%
@end example
@comment file: calc++-parser.yy
@example
void
-yy::calcxx_parser::error (const yy::calcxx_parser::location_type& l,
+yy::calcxx_parser::error (const location_type& l,
const std::string& m)
@{
driver.error (l, m);
@comment file: calc++-scanner.ll
@example
%@{ /* -*- C++ -*- */
-# include <cstdlib>
# include <cerrno>
# include <climits>
+# include <cstdlib>
# include <string>
# include "calc++-driver.hh"
# include "calc++-parser.hh"
-/* Work around an incompatibility in flex (at least versions
- 2.5.31 through 2.5.33): it generates code that does
- not conform to C89. See Debian bug 333231
- <http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=333231>. */
+// Work around an incompatibility in flex (at least versions
+// 2.5.31 through 2.5.33): it generates code that does
+// not conform to C89. See Debian bug 333231
+// <http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=333231>.
# undef yywrap
# define yywrap() 1
-/* By default yylex returns int, we use token_type.
- Unfortunately yyterminate by default returns 0, which is
- not of token_type. */
-#define yyterminate() return token::END
+// The location of the current token.
+static yy::location loc;
%@}
@end example
Because there is no @code{#include}-like feature we don't need
@code{yywrap}, we don't need @code{unput} either, and we parse an
actual file, this is not an interactive session with the user.
-Finally we enable the scanner tracing features.
+Finally, we enable scanner tracing.
@comment file: calc++-scanner.ll
@example
-%option noyywrap nounput batch debug
+%option noyywrap nounput batch debug noinput
@end example
@noindent
@noindent
The following paragraph suffices to track locations accurately. Each
time @code{yylex} is invoked, the begin position is moved onto the end
-position. Then when a pattern is matched, the end position is
-advanced of its width. In case it matched ends of lines, the end
+position. Then when a pattern is matched, its width is added to the end
+column. When matching ends of lines, the end
cursor is adjusted, and each time blanks are matched, the begin cursor
is moved onto the end cursor to effectively ignore the blanks
preceding tokens. Comments would be treated equally.
@example
@group
%@{
-# define YY_USER_ACTION yylloc->columns (yyleng);
+ // Code run each time a pattern is matched.
+ # define YY_USER_ACTION loc.columns (yyleng);
%@}
@end group
%%
+@group
%@{
- yylloc->step ();
+ // Code run each time yylex is called.
+ loc.step ();
%@}
-@{blank@}+ yylloc->step ();
-[\n]+ yylloc->lines (yyleng); yylloc->step ();
+@end group
+@{blank@}+ loc.step ();
+[\n]+ loc.lines (yyleng); loc.step ();
@end example
@noindent
-The rules are simple, just note the use of the driver to report errors.
-It is convenient to use a typedef to shorten
-@code{yy::calcxx_parser::token::identifier} into
-@code{token::identifier} for instance.
+The rules are simple. The driver is used to report errors.
@comment file: calc++-scanner.ll
@example
-%@{
- typedef yy::calcxx_parser::token token;
-%@}
- /* Convert ints to the actual type of tokens. */
-[-+*/] return yy::calcxx_parser::token_type (yytext[0]);
-":=" return token::ASSIGN;
+"-" return yy::calcxx_parser::make_MINUS(loc);
+"+" return yy::calcxx_parser::make_PLUS(loc);
+"*" return yy::calcxx_parser::make_STAR(loc);
+"/" return yy::calcxx_parser::make_SLASH(loc);
+"(" return yy::calcxx_parser::make_LPAREN(loc);
+")" return yy::calcxx_parser::make_RPAREN(loc);
+":=" return yy::calcxx_parser::make_ASSIGN(loc);
+
+@group
@{int@} @{
errno = 0;
long n = strtol (yytext, NULL, 10);
if (! (INT_MIN <= n && n <= INT_MAX && errno != ERANGE))
- driver.error (*yylloc, "integer is out of range");
- yylval->ival = n;
- return token::NUMBER;
+ driver.error (loc, "integer is out of range");
+ return yy::calcxx_parser::make_NUMBER(n, loc);
@}
-@{id@} yylval->sval = new std::string (yytext); return token::IDENTIFIER;
-. driver.error (*yylloc, "invalid character");
+@end group
+@{id@} return yy::calcxx_parser::make_IDENTIFIER(yytext, loc);
+. driver.error (loc, "invalid character");
+<<EOF>> return yy::calcxx_parser::make_END(loc);
%%
@end example
@noindent
-Finally, because the scanner related driver's member function depend
+Finally, because the scanner-related driver's member-functions depend
on the scanner's data, it is simpler to implement them in this file.
@comment file: calc++-scanner.ll
int
main (int argc, char *argv[])
@{
+ int res = 0;
calcxx_driver driver;
for (int i = 1; i < argc; ++i)
if (argv[i] == std::string ("-p"))
driver.trace_scanning = true;
else if (!driver.parse (argv[i]))
std::cout << driver.result << std::endl;
+ else
+ res = 1;
+ return res;
@}
@end group
@end example
Contrary to C parsers, Java parsers do not use global variables; the
state of the parser is always local to an instance of the parser class.
Therefore, all Java parsers are ``pure'', and the @code{%pure-parser}
-and @code{%define api.pure full} directives does not do anything when used in
-Java.
+and @code{%define api.pure} directives do nothing when used in Java.
Push parsers are currently unsupported in Java and @code{%define
api.push-pull} have no effect.
@code{%defines} directive or the @option{-d}/@option{--defines} options.
@c FIXME: Possible code change.
-Currently, support for debugging and verbose errors are always compiled
-in. Thus the @code{%debug} and @code{%token-table} directives and the
+Currently, support for tracing is always compiled
+in. Thus the @samp{%define parse.trace} and @samp{%token-table}
+directives and the
@option{-t}/@option{--debug} and @option{-k}/@option{--token-table}
options have no effect. This may change in the future to eliminate
-unused code in the generated parser, so use @code{%debug} and
-@code{%verbose-error} explicitly if needed. Also, in the future the
+unused code in the generated parser, so use @samp{%define parse.trace}
+explicitly
+if needed. Also, in the future the
@code{%token-table} directive might enable a public interface to
access the token names and codes.
+Getting a ``code too large'' error from the Java compiler means the code
+hit the 64KB bytecode per method limitation of the Java class file.
+Try reducing the amount of code in actions and static initializers;
+otherwise, report a bug so that the parser skeleton will be improved.
+
+
@node Java Semantic Values
@subsection Java Semantic Values
@c - No %union, specify type in %type/%token.
By default, the semantic stack is declared to have @code{Object} members,
which means that the class types you specify can be of any class.
To improve the type safety of the parser, you can declare the common
-superclass of all the semantic values using the @code{%define stype}
+superclass of all the semantic values using the @samp{%define api.value.type}
directive. For example, after the following declaration:
@example
-%define stype "ASTNode"
+%define api.value.type "ASTNode"
@end example
@noindent
The name of the generated parser class defaults to @code{YYParser}. The
@code{YY} prefix may be changed using the @code{%name-prefix} directive
or the @option{-p}/@option{--name-prefix} option. Alternatively, use
-@code{%define parser_class_name "@var{name}"} to give a custom name to
+@samp{%define parser_class_name "@var{name}"} to give a custom name to
the class. The interface of this class is detailed below.
By default, the parser class has package visibility. A declaration
-@code{%define public} will change to public visibility. Remember that,
+@samp{%define public} will change to public visibility. Remember that,
according to the Java language specification, the name of the @file{.java}
file should match the name of the class in this case. Similarly, you can
use @code{abstract}, @code{final} and @code{strictfp} with the
@code{%define} declaration to add other modifiers to the parser class.
+A single @samp{%define annotations "@var{annotations}"} directive can
+be used to add any number of annotations to the parser class.
The Java package name of the parser class can be specified using the
-@code{%define package} directive. The superclass and the implemented
+@samp{%define package} directive. The superclass and the implemented
interfaces of the parser class can be specified with the @code{%define
-extends} and @code{%define implements} directives.
+extends} and @samp{%define implements} directives.
The parser class defines an inner class, @code{Location}, that is used
for location tracking (see @ref{Java Location Values}), and a inner
below, all the other members and fields are preceded with a @code{yy} or
@code{YY} prefix to avoid clashes with user code.
-@c FIXME: The following constants and variables are still undocumented:
-@c @code{bisonVersion}, @code{bisonSkeleton} and @code{errorVerbose}.
-
The parser class can be extended using the @code{%parse-param}
directive. Each occurrence of the directive will add a @code{protected
final} field to the parser class, and an argument to its constructor,
which initialize them automatically.
-Token names defined by @code{%token} and the predefined @code{EOF} token
-name are added as constant fields to the parser class.
-
@deftypeop {Constructor} {YYParser} {} YYParser (@var{lex_param}, @dots{}, @var{parse_param}, @dots{})
Build a new parser object with embedded @code{%code lexer}. There are
-no parameters, unless @code{%parse-param}s and/or @code{%lex-param}s are
-used.
+no parameters, unless @code{%param}s and/or @code{%parse-param}s and/or
+@code{%lex-param}s are used.
+
+Use @code{%code init} for code added to the start of the constructor
+body. This is especially useful to initialize superclasses. Use
+@samp{%define init_throws} to specify any uncaught exceptions.
@end deftypeop
@deftypeop {Constructor} {YYParser} {} YYParser (Lexer @var{lexer}, @var{parse_param}, @dots{})
Build a new parser object using the specified scanner. There are no
-additional parameters unless @code{%parse-param}s are used.
+additional parameters unless @code{%param}s and/or @code{%parse-param}s are
+used.
If the scanner is defined by @code{%code lexer}, this constructor is
declared @code{protected} and is called automatically with a scanner
-created with the correct @code{%lex-param}s.
+created with the correct @code{%param}s and/or @code{%lex-param}s.
+
+Use @code{%code init} for code added to the start of the constructor
+body. This is especially useful to initialize superclasses. Use
+@samp{%define init_throws} to specify any uncaught exceptions.
@end deftypeop
@deftypemethod {YYParser} {boolean} parse ()
@code{false} otherwise.
@end deftypemethod
+@deftypemethod {YYParser} {boolean} getErrorVerbose ()
+@deftypemethodx {YYParser} {void} setErrorVerbose (boolean @var{verbose})
+Get or set the option to produce verbose error messages. These are only
+available with @samp{%define parse.error verbose}, which also turns on
+verbose error messages.
+@end deftypemethod
+
+@deftypemethod {YYParser} {void} yyerror (String @var{msg})
+@deftypemethodx {YYParser} {void} yyerror (Position @var{pos}, String @var{msg})
+@deftypemethodx {YYParser} {void} yyerror (Location @var{loc}, String @var{msg})
+Print an error message using the @code{yyerror} method of the scanner
+instance in use. The @code{Location} and @code{Position} parameters are
+available only if location tracking is active.
+@end deftypemethod
+
@deftypemethod {YYParser} {boolean} recovering ()
During the syntactic analysis, return @code{true} if recovering
from a syntax error.
or nonzero, full tracing.
@end deftypemethod
+@deftypecv {Constant} {YYParser} {String} {bisonVersion}
+@deftypecvx {Constant} {YYParser} {String} {bisonSkeleton}
+Identify the Bison version and skeleton used to generate this parser.
+@end deftypecv
+
@node Java Scanner Interface
@subsection Java Scanner Interface
There are two possible ways to interface a Bison-generated Java parser
with a scanner: the scanner may be defined by @code{%code lexer}, or
defined elsewhere. In either case, the scanner has to implement the
-@code{Lexer} inner interface of the parser class.
+@code{Lexer} inner interface of the parser class. This interface also
+contain constants for all user-defined token names and the predefined
+@code{EOF} token.
In the first case, the body of the scanner class is placed in
@code{%code lexer} blocks. If you want to pass parameters from the
value and location are saved and returned by the their methods in the
interface.
-Use @code{%define lex_throws} to specify any uncaught exceptions.
+Use @samp{%define lex_throws} to specify any uncaught exceptions.
Default is @code{java.io.IOException}.
@end deftypemethod
@deftypemethod {Lexer} {Object} getLVal ()
Return the semantic value of the last token that yylex returned.
-The return type can be changed using @code{%define stype
+The return type can be changed using @samp{%define api.value.type
"@var{class-name}".}
@end deftypemethod
The following special constructs can be uses in Java actions.
Other analogous C action features are currently unavailable for Java.
-Use @code{%define throws} to specify any uncaught exceptions from parser
+Use @samp{%define throws} to specify any uncaught exceptions from parser
actions, and initial actions specified by @code{%initial-action}.
@defvar $@var{n}
@defvar $$
The semantic value for the grouping made by the current rule. As a
value, this is in the base type (@code{Object} or as specified by
-@code{%define stype}) as in not cast to the declared subtype because
+@samp{%define api.value.type}) as in not cast to the declared subtype because
casts are not allowed on the left-hand side of Java assignments.
Use an explicit Java cast if the correct subtype is needed.
@xref{Java Semantic Values}.
@xref{Error Recovery}.
@end deftypefn
-@deftypefn {Function} {protected void} yyerror (String msg)
-@deftypefnx {Function} {protected void} yyerror (Position pos, String msg)
-@deftypefnx {Function} {protected void} yyerror (Location loc, String msg)
+@deftypefn {Function} {void} yyerror (String @var{msg})
+@deftypefnx {Function} {void} yyerror (Position @var{loc}, String @var{msg})
+@deftypefnx {Function} {void} yyerror (Location @var{loc}, String @var{msg})
Print an error message using the @code{yyerror} method of the scanner
-instance in use.
+instance in use. The @code{Location} and @code{Position} parameters are
+available only if location tracking is active.
@end deftypefn
@item
Java lacks unions, so @code{%union} has no effect. Instead, semantic
values have a common base type: @code{Object} or as specified by
-@samp{%define stype}. Angle brackets on @code{%token}, @code{type},
+@samp{%define api.value.type}. Angle brackets on @code{%token}, @code{type},
@code{$@var{n}} and @code{$$} specify subtypes rather than fields of
an union. The type of @code{$$}, even with angle brackets, is the base
type since Java casts are not allow on the left-hand side of assignments.
@item @code{%code imports}
blocks are placed at the beginning of the Java source code. They may
include copyright notices. For a @code{package} declarations, it is
-suggested to use @code{%define package} instead.
+suggested to use @samp{%define package} instead.
@item unqualified @code{%code}
blocks are placed inside the parser class.
@deffn {Directive} %name-prefix "@var{prefix}"
The prefix of the parser class name @code{@var{prefix}Parser} if
-@code{%define parser_class_name} is not used. Default is @code{YY}.
+@samp{%define parser_class_name} is not used. Default is @code{YY}.
@xref{Java Bison Interface}.
@end deffn
@xref{Java Differences}.
@end deffn
+@deffn {Directive} {%code init} @{ @var{code} @dots{} @}
+Code inserted at the beginning of the parser constructor body.
+@xref{Java Parser Interface}.
+@end deffn
+
@deffn {Directive} {%code lexer} @{ @var{code} @dots{} @}
Code added to the body of a inner lexer class within the parser class.
@xref{Java Scanner Interface}.
@end deffn
@deffn {Directive} %@{ @var{code} @dots{} %@}
-Not supported. Use @code{%code import} instead.
+Not supported. Use @code{%code imports} instead.
@xref{Java Differences}.
@end deffn
@xref{Java Bison Interface}.
@end deffn
+@deffn {Directive} {%define annotations} "@var{annotations}"
+The Java annotations for the parser class. Default is none.
+@xref{Java Bison Interface}.
+@end deffn
+
@deffn {Directive} {%define extends} "@var{superclass}"
The superclass of the parser class. Default is none.
@xref{Java Bison Interface}.
@xref{Java Bison Interface}.
@end deffn
+@deffn {Directive} {%define init_throws} "@var{exceptions}"
+The exceptions thrown by @code{%code init} from the parser class
+constructor. Default is none.
+@xref{Java Parser Interface}.
+@end deffn
+
@deffn {Directive} {%define lex_throws} "@var{exceptions}"
The exceptions thrown by the @code{yylex} method of the lexer, a
comma-separated list. Default is @code{java.io.IOException}.
@xref{Java Bison Interface}.
@end deffn
-@deffn {Directive} {%define stype} "@var{class}"
+@deffn {Directive} {%define api.value.type} "@var{class}"
The base type of semantic values. Default is @code{Object}.
@xref{Java Semantic Values}.
@end deffn
version. If you have trouble compiling, you should also include a
transcript of the build session, starting with the invocation of
`configure'. Depending on the nature of the bug, you may be asked to
-send additional files as well (such as `config.h' or `config.cache').
+send additional files as well (such as @file{config.h} or @file{config.cache}).
Patches are most welcome, but not required. That is, do not hesitate to
send a bug report just because you cannot provide a fix.
@end deffn
@deffn {Variable} @@@var{n}
+@deffnx {Symbol} @@@var{n}
In an action, the location of the @var{n}-th symbol of the right-hand side
of the rule. @xref{Tracking Locations}.
+
+In a grammar, the Bison-generated nonterminal symbol for a mid-rule action
+with a semantical value. @xref{Mid-Rule Action Translation}.
@end deffn
@deffn {Variable} @@@var{name}
-In an action, the location of a symbol addressed by name. @xref{Tracking
-Locations}.
+@deffnx {Variable} @@[@var{name}]
+In an action, the location of a symbol addressed by @var{name}.
+@xref{Tracking Locations}.
@end deffn
-@deffn {Variable} @@[@var{name}]
-In an action, the location of a symbol addressed by name. @xref{Tracking
-Locations}.
+@deffn {Symbol} $@@@var{n}
+In a grammar, the Bison-generated nonterminal symbol for a mid-rule action
+with no semantical value. @xref{Mid-Rule Action Translation}.
@end deffn
@deffn {Variable} $$
@end deffn
@deffn {Variable} $@var{name}
-In an action, the semantic value of a symbol addressed by name.
-@xref{Actions}.
-@end deffn
-
-@deffn {Variable} $[@var{name}]
-In an action, the semantic value of a symbol addressed by name.
+@deffnx {Variable} $[@var{name}]
+In an action, the semantic value of a symbol addressed by @var{name}.
@xref{Actions}.
@end deffn
Grammar}.
@end deffn
-@deffn {Construct} /*@dots{}*/
-Comment delimiters, as in C.
+@deffn {Directive} %?@{@var{expression}@}
+Predicate actions. This is a type of action clause that may appear in
+rules. The expression is evaluated, and if false, causes a syntax error. In
+GLR parsers during nondeterministic operation,
+this silently causes an alternative parse to die. During deterministic
+operation, it is the same as the effect of YYERROR.
+@xref{Semantic Predicates}.
+
+This feature is experimental.
+More user feedback will help to determine whether it should become a permanent
+feature.
+@end deffn
+
+@deffn {Construct} /* @dots{} */
+@deffnx {Construct} // @dots{}
+Comments, as in C/C++.
@end deffn
@deffn {Delimiter} :
GLR Parsers}.
@end deffn
+@deffn {Directive} %empty
+Bison declaration to declare make explicit that a rule has an empty
+right-hand side. @xref{Empty Rules}.
+@end deffn
+
@deffn {Symbol} $end
The predefined token marking the end of the token stream. It cannot be
used in the grammar.
@end deffn
@deffn {Directive} %error-verbose
-Bison declaration to request verbose, specific error message strings
-when @code{yyerror} is called. @xref{Error Reporting}.
+An obsolete directive standing for @samp{%define parse.error verbose}
+(@pxref{Error Reporting, ,The Error Reporting Function @code{yyerror}}).
@end deffn
@deffn {Directive} %file-prefix "@var{prefix}"
@end deffn
@deffn {Directive} %left
-Bison declaration to assign left associativity to token(s).
+Bison declaration to assign precedence and left associativity to token(s).
@xref{Precedence Decl, ,Operator Precedence}.
@end deffn
-@deffn {Directive} %lex-param @{@var{argument-declaration}@}
-Bison declaration to specifying an additional parameter that
+@deffn {Directive} %lex-param @{@var{argument-declaration}@} @dots{}
+Bison declaration to specifying additional arguments that
@code{yylex} should accept. @xref{Pure Calling,, Calling Conventions
for Pure Parsers}.
@end deffn
@code{yypstate_new} and @code{yypstate_delete} will also be renamed. For
example, if you use @samp{%name-prefix "c_"}, the names become
@code{c_parse}, @code{c_lex}, and so on. For C++ parsers, see the
-@code{%define namespace} documentation in this section.
+@code{%define api.namespace} documentation in this section.
@end deffn
@end deffn
@deffn {Directive} %nonassoc
-Bison declaration to assign nonassociativity to token(s).
+Bison declaration to assign precedence and nonassociativity to token(s).
@xref{Precedence Decl, ,Operator Precedence}.
@end deffn
@xref{Decl Summary}.
@end deffn
-@deffn {Directive} %parse-param @{@var{argument-declaration}@}
-Bison declaration to specifying an additional parameter that
-@code{yyparse} should accept. @xref{Parser Function,, The Parser
-Function @code{yyparse}}.
+@deffn {Directive} %param @{@var{argument-declaration}@} @dots{}
+Bison declaration to specify additional arguments that both
+@code{yylex} and @code{yyparse} should accept. @xref{Parser Function,, The
+Parser Function @code{yyparse}}.
+@end deffn
+
+@deffn {Directive} %parse-param @{@var{argument-declaration}@} @dots{}
+Bison declaration to specify additional arguments that @code{yyparse}
+should accept. @xref{Parser Function,, The Parser Function @code{yyparse}}.
@end deffn
@deffn {Directive} %prec
@xref{Contextual Precedence, ,Context-Dependent Precedence}.
@end deffn
+@deffn {Directive} %precedence
+Bison declaration to assign precedence to token(s), but no associativity
+@xref{Precedence Decl, ,Operator Precedence}.
+@end deffn
+
@deffn {Directive} %pure-parser
-Deprecated version of @code{%define api.pure} (@pxref{%define
+Deprecated version of @samp{%define api.pure} (@pxref{%define
Summary,,api.pure}), for which Bison is more careful to warn about
unreasonable usage.
@end deffn
@end deffn
@deffn {Directive} %right
-Bison declaration to assign right associativity to token(s).
+Bison declaration to assign precedence and right associativity to token(s).
@xref{Precedence Decl, ,Operator Precedence}.
@end deffn
@deffn {Directive} %union
Bison declaration to specify several possible data types for semantic
-values. @xref{Union Decl, ,The Collection of Value Types}.
+values. @xref{Union Decl, ,The Union Declaration}.
@end deffn
@deffn {Macro} YYABORT
@deffn {Function} yyerror
User-supplied function to be called by @code{yyparse} on error.
-@xref{Error Reporting, ,The Error
-Reporting Function @code{yyerror}}.
+@xref{Error Reporting, ,The Error Reporting Function @code{yyerror}}.
@end deffn
@deffn {Macro} YYERROR_VERBOSE
-An obsolete macro that you define with @code{#define} in the prologue
-to request verbose, specific error message strings
-when @code{yyerror} is called. It doesn't matter what definition you
-use for @code{YYERROR_VERBOSE}, just whether you define it.
-Supported by the C skeletons only; using
-@code{%error-verbose} is preferred. @xref{Error Reporting}.
+An obsolete macro used in the @file{yacc.c} skeleton, that you define
+with @code{#define} in the prologue to request verbose, specific error
+message strings when @code{yyerror} is called. It doesn't matter what
+definition you use for @code{YYERROR_VERBOSE}, just whether you define
+it. Using @samp{%define parse.error verbose} is preferred
+(@pxref{Error Reporting, ,The Error Reporting Function @code{yyerror}}).
@end deffn
@deffn {Macro} YYFPRINTF
@code{yylex}}.
@end deffn
-@deffn {Macro} YYLEX_PARAM
-An obsolete macro for specifying an extra argument (or list of extra
-arguments) for @code{yyparse} to pass to @code{yylex}. The use of this
-macro is deprecated, and is supported only for Yacc like parsers.
-@xref{Pure Calling,, Calling Conventions for Pure Parsers}.
-@end deffn
-
@deffn {Variable} yylloc
External variable in which @code{yylex} should place the line and column
numbers associated with a token. (In a pure parser, it is a local
@deffn {Variable} yynerrs
Global variable which Bison increments each time it reports a syntax error.
(In a pure parser, it is a local variable within @code{yyparse}. In a
-pure push parser, it is a member of yypstate.)
+pure push parser, it is a member of @code{yypstate}.)
@xref{Error Reporting, ,The Error Reporting Function @code{yyerror}}.
@end deffn
More user feedback will help to stabilize it.)
@end deffn
-@deffn {Macro} YYPARSE_PARAM
-An obsolete macro for specifying the name of a parameter that
-@code{yyparse} should accept. The use of this macro is deprecated, and
-is supported only for Yacc like parsers. @xref{Pure Calling,, Calling
-Conventions for Pure Parsers}.
-@end deffn
-
@deffn {Macro} YYRECOVERING
The expression @code{YYRECOVERING ()} yields 1 when the parser
is recovering from a syntax error, and 0 otherwise.
@end deffn
@deffn {Type} YYSTYPE
+Deprecated in favor of the @code{%define} variable @code{api.value.type}.
Data type of semantic values; @code{int} by default.
@xref{Value Type, ,Data Types of Semantic Values}.
@end deffn
@item Accepting state
A state whose only action is the accept action.
The accepting state is thus a consistent state.
-@xref{Understanding,,}.
+@xref{Understanding, ,Understanding Your Parser}.
@item Backus-Naur Form (BNF; also called ``Backus Normal Form'')
Formal method of specifying context-free grammars originally proposed
projects / bison.git / blobdiff