+2005-12-01 Paul Eggert <eggert@cs.ucla.edu>
+
+ * data/yacc.c: Say "parser skeleton" rather than "file", since
+ it's no longer just a file.
+ * data/glr.c: Grant a special exception for C GLR parsers, that
+ reads like the already-existing exception for C LALR(1) parsers.
+ * data/glr.cc: Likewise.
+ * data/lalr1.cc: Likewise.
+ * data/location.cc: Likewise.
+ * data/yacc.c: Reword the "written by" statement to clarify that
+ it was the parser skeleton, not the entire output file.
+ * data/glr.c: Written by Paul Hilfinger.
+ * data/glr.cc: Written by Akim Demaille.
+ * data/lalr1.cc: Likewise.
+
+2005-11-18 Paul Eggert <eggert@cs.ucla.edu>
+
+ * data/yacc.c (yy_reduce_print, YY_REDUCE_PRINT):
+ Fix typos in previous change that broke 'make check'.
+ YY_REDUCE_PRINT cannot be a pseudo-varargs macro; that isn't
+ supported in C.
+ * tests/calc.at (_AT_CHECK_CALC,_AT_CHECK_CALC_ERROR):
+ Don't check NUM-STDERR-LINES, since the output format is fluctuating.
+ We can revert this once things settle down.
+
+ * src/conflicts.c (conflicts_print): Don't print file name twice
+ when %expect fails because there were no conflicts.
+ * doc/bison.texinfo (Expect Decl): Tighten up wording in previous
+ change.
+ * tests/conflicts.at (%expect not enough, %expect too much):
+ (%expect with reduce conflicts): Adjust to new behavior.
+
+2005-11-18 Akim Demaille <akim@epita.fr>
+
+ * src/conflicts.c (conflicts_print): Unsatisfied %expectation are
+ errors.
+ * NEWS: Document this.
+ * doc/bison.texinfo (Expect Decl): Likewise.
+
+2005-11-16 Akim Demaille <akim@epita.fr>
+
+ Generalize the display of semantic values and locations in traces.
+ * data/glr.c (yy_reduce_print): Fix indices (again).
+ * data/c++.m4 (b4_rhs_value, b4_rhs_location): Don't expect
+ literal integers.
+ * data/lalr1.cc (yyreduce_print): Rename as...
+ (yy_reduce_print): this.
+ Display values and locations.
+ * data/yacc.c (yy_reduce_print): Likewise.
+ (YY_REDUCE_PRINT): Adjust to pass the required arguments.
+ (yysymprint): Move higher to be visible from yy_reduce_print).
+ (yyparse): Adjust.
+ * tests/calc.at: Adjust the expected length of the traces.
+
+2005-11-14 Akim Demaille <akim@epita.fr>
+
+ * data/glr.c (yy_reduce_print): The loop was quite wrong: type are
+ from 1 to N, while values and location start at 0.
+ (b4_rhs_location, b4_rhs_value): Add parens around $1 and $2.
+
+2005-11-14 Akim Demaille <akim@epita.fr>
+
+ * data/glr.c (yy_reduce_print): Fix the $ number.
+
+2005-11-14 Akim Demaille <akim@epita.fr>
+
+ "Use" parse parameters.
+ * data/c.m4 (b4_parse_param_for, b4_parse_param_use): New.
+ * data/glr.c, data/glr.cc: Use them.
+ * data/glr.c (YYUSE): Have a C++ definition that supports
+ non-pointer types.
+
+2005-11-14 Akim Demaille <akim@epita.fr>
+
+ * data/glr.c (yyexpandGLRStack): Declare only if defined.
+
+2005-11-14 Akim Demaille <akim@epita.fr>
+
+ * data/glr.cc: New.
+ * data/m4sugar/m4sugar.m4 (m4_prepend): New.
+
+2005-11-12 Akim Demaille <akim@epita.fr>
+
+ Let position and location be PODs.
+ * data/location.cc (position::initialize, location::initialize): New.
+ (position::position, location::location): Define only if
+ b4_location_constructors is defined.
+ * data/lalr1.cc (b4_location_constructors): Define it for backward
+ compatibility.
+ * doc/bison.texinfo (Initial Action Decl): Use initialize.
+
+2005-11-12 Akim Demaille <akim@epita.fr>
+
+ * data/lalr1.cc: Move the body of the ctor and dtor into the
+ parser file (instead of the header).
+ Wrap the implementations in a "namespace yy".
+
+2005-11-12 Akim Demaille <akim@epita.fr>
+
+ Have glr.c include its header file when created.
+ * data/glr.c (b4_shared_declarations): New.
+ Output them verbatim in the parser if !%defines, otherwise
+ output then in the header file, and include it instead.
+
+2005-11-11 Akim Demaille <akim@epita.fr>
+
+ * data/glr.c: Comment changes.
+
+2005-11-11 Akim Demaille <akim@epita.fr>
+
+ When yydebug, report semantic and location values for reductions.
+ * data/glr.c (yy_reduce_print): Report the semantic values and the
+ locations.
+ (YY_REDUCE_PRINT): Adjust.
+ (yyglrReduce): Use them.
+ (b4_rhs_value, b4_rhs_location): Remove m4_eval invocations.
+ * data/c.m4 (b4_yysymprint_generate): Specify the const arguments.
+ * tests/calc.at (_AT_CHECK_CALC_ERROR): Remove the reduction
+ traces.
+
+2005-11-10 Akim Demaille <akim@epita.fr>
+
+ * data/glr.c (yynewGLRStackItem, YY_RESERVE_GLRSTACK): New.
+ (yyaddDeferredAction, yyglrShift, yyglrShiftDefer): Use them.
+ (yyexpandGLRStack, YYRELOC): Define only when YYSTACKEXPANDABLE.
+
+2005-11-09 Albert Chin-A-Young <china@thewrittenword.com>
+
+ * m4/cxx.m4, examples/Makefile.am: Don't build
+ examples/calc++ if no C++ compiler is available. (trivial change)
+
+2005-11-09 Akim Demaille <akim@epita.fr>
+
+ * src/scan-skel.l: Use a couple of asserts.
+
+2005-11-03 Akim Demaille <akim@epita.fr>
+
+ In some (weird) cases, the final state number is incorrect.
+ Reported by Alexandre Duret-Lutz.
+ * src/LR0.c (state_list_append): Remove the computation of
+ final_state.
+ (save_reductions): Do it here.
+ (get_state): Alpha conversion.
+ (generate_states): Use a for loop.
+ * src/gram.h (item_number_is_rule_number)
+ (item_number_is_symbol_number): New.
+ * src/state.c: Use assert.
+ * src/system.h: Include assert.h.
+ * tests/sets.at (Accept): New.
+
+2005-10-30 Paul Hilfinger <hilfingr@tully.CS.Berkeley.EDU>
+
+ * data/glr.c (yyfill): Adjust comment.
+ (yyresolveAction): Initialize default location properly
+ for empty right-hand sides.
+ (yydoAction): Ditto.
+ Add comment explaining apparently dead code.
+ * tests/glr-regression.at
+ (Incorrectly initialized location for empty right-hand side in GLR):
+ New test.
+
+2005-10-30 Paul Eggert <eggert@cs.ucla.edu>
+
+ * bootstrap (cleanup_gnulib): New function. Use it to clean up
+ gnulib when interrupted. This fixes some race conditions and
+ works around some portability problems (one noted by Paul
+ Hilfinger).
+
+2005-10-22 Akim <akim@epita.fr>
+
+ * Makefile.cfg: Adjust to config -> build-aux.
+ Reported by twledo.
+
projects / bison.git / blobdiff