* Changes in version 2.5 (????-??-??):
-** Named References Support
+** Grammar symbol names can now contain non-initial dashes:
+
+ Consistently with directives (such as %error-verbose) and with
+ %define variables (e.g. push-pull), grammar symbol names may contain
+ dashes in any position except the beginning. This is a GNU
+ extension over POSIX Yacc. Thus, use of this extension is reported
+ by -Wyacc and rejected in Yacc mode (--yacc).
+
+** Named references:
Historically, Yacc and Bison have supported positional references
($n, $$) to allow access to symbol values from inside of semantic
These features are experimental in this version. More user feedback
will help to stabilize them.
-** IELR(1) and Canonical LR(1) Support
+** IELR(1) and canonical LR(1):
IELR(1) is a minimal LR(1) parser table generation algorithm. That
is, given any context-free grammar, IELR(1) generates parser tables
with the full language recognition power of canonical LR(1) but with
- nearly the same number of parser states as LALR(1). This reduction in
- parser states is often an order of magnitude. More importantly,
+ nearly the same number of parser states as LALR(1). This reduction
+ in parser states is often an order of magnitude. More importantly,
because canonical LR(1)'s extra parser states may contain duplicate
conflicts in the case of non-LR(1) grammars, the number of conflicts
for IELR(1) is often an order of magnitude less as well. This can
%define lr.type ielr
%define lr.type canonical-lr
- The default reduction optimization in the parser tables can also be
- adjusted using `%define lr.default-reductions'. See the documentation
- for `%define lr.type' and `%define lr.default-reductions' in the
- section `Bison Declaration Summary' in the Bison manual for the
- details.
+ The default-reduction optimization in the parser tables can also be
+ adjusted using `%define lr.default-reductions'. For details on both
+ of these features, see the new section `Tuning LR' in the Bison
+ manual.
These features are experimental. More user feedback will help to
stabilize them.
-** Unrecognized %code qualifiers are now an error not a warning.
+** LAC (Lookahead Correction) for syntax error handling:
-** %define improvements.
+ Canonical LR, IELR, and LALR can suffer from a couple of problems
+ upon encountering a syntax error. First, the parser might perform
+ additional parser stack reductions before discovering the syntax
+ error. Such reductions can perform user semantic actions that are
+ unexpected because they are based on an invalid token, and they
+ cause error recovery to begin in a different syntactic context than
+ the one in which the invalid token was encountered. Second, when
+ verbose error messages are enabled (with %error-verbose or the
+ obsolete `#define YYERROR_VERBOSE'), the expected token list in the
+ syntax error message can both contain invalid tokens and omit valid
+ tokens.
-*** Unrecognized variables are now an error not a warning.
+ The culprits for the above problems are %nonassoc, default
+ reductions in inconsistent states, and parser state merging. Thus,
+ IELR and LALR suffer the most. Canonical LR can suffer only if
+ %nonassoc is used or if default reductions are enabled for
+ inconsistent states.
-*** Multiple invocations for any variable is now an error not a warning.
+ LAC is a new mechanism within the parsing algorithm that solves
+ these problems for canonical LR, IELR, and LALR without sacrificing
+ %nonassoc, default reductions, or state merging. When LAC is in
+ use, canonical LR and IELR behave almost exactly the same for both
+ syntactically acceptable and syntactically unacceptable input.
+ While LALR still does not support the full language-recognition
+ power of canonical LR and IELR, LAC at least enables LALR's syntax
+ error handling to correctly reflect LALR's language-recognition
+ power.
+
+ Currently, LAC is only supported for deterministic parsers in C.
+ You can enable LAC with the following directive:
-*** Can now be invoked via the command line.
+ %define parse.lac full
+
+ See the new section `LAC' in the Bison manual for additional
+ details including a few caveats.
+
+ LAC is an experimental feature. More user feedback will help to
+ stabilize it.
+
+** %define improvements:
+
+*** Can now be invoked via the command line:
Each of these command-line options
quietly override %define, but -D and --define do not. For further
details, see the section "Bison Options" in the Bison manual.
-*** Variables renamed.
+*** Variables renamed:
The following %define variables
The old names are now deprecated but will be maintained indefinitely
for backward compatibility.
-*** Values no longer need to be quoted in grammar file.
+*** Values no longer need to be quoted in grammar file:
If a %define value is an identifier, it no longer needs to be placed
within quotations marks. For example,
%define api.push-pull push
-** Symbol names.
-
- Consistently with directives (such as %error-verbose) and variables
- (e.g. push-pull), symbol names may include dashes in any position,
- similarly to periods and underscores. This is GNU extension over
- POSIX Yacc whose use is reported by -Wyacc, and rejected in Yacc
- mode (--yacc).
+*** Unrecognized variables are now errors not warnings.
-** YYFAIL now produces warnings and Java parsers no longer implement it.
-
- YYFAIL has existed for many years as an undocumented feature of
- deterministic parsers in C generated by Bison. More recently, it was
- a documented feature of Bison's experimental Java parsers. As
- promised in Bison 2.4.2's NEWS entry, any appearance of YYFAIL in a
- semantic action now produces a deprecation warning, and Java parsers
- no longer implement YYFAIL at all. For further details, including a
- discussion of how to suppress C preprocessor warnings about YYFAIL
- being unused, see the Bison 2.4.2 NEWS entry.
-
-** Temporary hack for adding a semicolon to the user action.
-
- Previously, Bison appended a semicolon to every user action for
- reductions when the output language defaulted to C (specifically, when
- neither %yacc, %language, %skeleton, or equivalent command-line
- options were specified). This allowed actions such as
-
- exp: exp "+" exp { $$ = $1 + $3 };
+*** Multiple invocations for any variable is now an error not a warning.
- instead of
+** Unrecognized %code qualifiers are now errors not warnings.
- exp: exp "+" exp { $$ = $1 + $3; };
-
- As a first step in removing this misfeature, Bison now issues a
- warning when it appends a semicolon. Moreover, in cases where Bison
- cannot easily determine whether a semicolon is needed (for example, an
- action ending with a cpp directive or a braced compound initializer),
- it no longer appends one. Thus, the C compiler might now complain
- about a missing semicolon where it did not before. Future releases of
- Bison will cease to append semicolons entirely.
-
-** Character literals not of length one.
+** Character literals not of length one:
Previously, Bison quietly converted all character literals to length
one. For example, without warning, Bison interpreted the operators in
;
Bison now warns when a character literal is not of length one. In
- some future release, Bison will report an error instead.
-
-** Verbose error messages fixed for nonassociative tokens.
-
- When %error-verbose is specified, syntax error messages produced by
- the generated parser include the unexpected token as well as a list of
- expected tokens. Previously, this list erroneously included tokens
- that would actually induce a syntax error because conflicts for them
- were resolved with %nonassoc. Such tokens are now properly omitted
- from the list.
+ some future release, Bison will start reporting an error instead.
-** Destructor calls fixed for lookaheads altered in semantic actions.
+** Destructor calls fixed for lookaheads altered in semantic actions:
Previously for deterministic parsers in C, if a user semantic action
altered yychar, the parser in some cases used the old yychar value to
determine which destructor to call for the lookahead upon a syntax
error or upon parser return. This bug has been fixed.
-** C++ parsers use YYRHSLOC
+** C++ parsers use YYRHSLOC:
Similarly to the C parsers, the C++ parsers now define the YYRHSLOC
macro and use it in the default YYLLOC_DEFAULT. You are encouraged
} \
while (false)
-** YYLLOC_DEFAULT in C++
+** YYLLOC_DEFAULT in C++:
The default implementation of YYLLOC_DEFAULT used to be issued in
the header file. It is now output in the implementation file, after
the user %code sections so that its #ifndef guard does not try to
override the user's YYLLOC_DEFAULT if provided.
-* Changes in version 2.4.3 (????-??-??):
+** YYFAIL now produces warnings and Java parsers no longer implement it:
+
+ YYFAIL has existed for many years as an undocumented feature of
+ deterministic parsers in C generated by Bison. More recently, it was
+ a documented feature of Bison's experimental Java parsers. As
+ promised in Bison 2.4.2's NEWS entry, any appearance of YYFAIL in a
+ semantic action now produces a deprecation warning, and Java parsers
+ no longer implement YYFAIL at all. For further details, including a
+ discussion of how to suppress C preprocessor warnings about YYFAIL
+ being unused, see the Bison 2.4.2 NEWS entry.
+
+** Temporary hack for adding a semicolon to the user action:
+
+ Previously, Bison appended a semicolon to every user action for
+ reductions when the output language defaulted to C (specifically, when
+ neither %yacc, %language, %skeleton, or equivalent command-line
+ options were specified). This allowed actions such as
+
+ exp: exp "+" exp { $$ = $1 + $3 };
+
+ instead of
+
+ exp: exp "+" exp { $$ = $1 + $3; };
+
+ As a first step in removing this misfeature, Bison now issues a
+ warning when it appends a semicolon. Moreover, in cases where Bison
+ cannot easily determine whether a semicolon is needed (for example, an
+ action ending with a cpp directive or a braced compound initializer),
+ it no longer appends one. Thus, the C compiler might now complain
+ about a missing semicolon where it did not before. Future releases of
+ Bison will cease to append semicolons entirely.
+
+** Verbose syntax error message fixes:
+
+ When %error-verbose or the obsolete `#define YYERROR_VERBOSE' is
+ specified, syntax error messages produced by the generated parser
+ include the unexpected token as well as a list of expected tokens.
+ The effect of %nonassoc on these verbose messages has been corrected
+ in two ways, but a more complete fix requires LAC, described above:
+
+*** When %nonassoc is used, there can exist parser states that accept no
+ tokens, and so the parser does not always require a lookahead token
+ in order to detect a syntax error. Because no unexpected token or
+ expected tokens can then be reported, the verbose syntax error
+ message described above is suppressed, and the parser instead
+ reports the simpler message, "syntax error". Previously, this
+ suppression was sometimes erroneously triggered by %nonassoc when a
+ lookahead was actually required. Now verbose messages are
+ suppressed only when all previous lookaheads have already been
+ shifted or discarded.
+
+*** Previously, the list of expected tokens erroneously included tokens
+ that would actually induce a syntax error because conflicts for them
+ were resolved with %nonassoc in the current parser state. Such
+ tokens are now properly omitted from the list.
+
+*** Expected token lists are still often wrong due to state merging
+ (from LALR or IELR) and default reductions, which can both add
+ invalid tokens and subtract valid tokens. Canonical LR almost
+ completely fixes this problem by eliminating state merging and
+ default reductions. However, there is one minor problem left even
+ when using canonical LR and even after the fixes above. That is,
+ if the resolution of a conflict with %nonassoc appears in a later
+ parser state than the one at which some syntax error is
+ discovered, the conflicted token is still erroneously included in
+ the expected token list. Bison's new LAC implementation,
+ described above, eliminates this problem and the need for
+ canonical LR. However, LAC is still experimental and is disabled
+ by default.
+
+** Java skeleton fixes:
+
+*** A location handling bug has been fixed.
+
+*** The top element of each of the value stack and location stack is now
+ cleared when popped so that it can be garbage collected.
+
+*** Parser traces now print the top element of the stack.
+
+* Changes in version 2.4.3 (2010-08-05):
** Bison now obeys -Werror and --warnings=error for warnings about
grammar rules that are useless in the parser due to conflicts.
errors in Bison 2.5. They will remain warnings, which should be
sufficient for POSIX while avoiding backward compatibility issues.
+** Minor documentation fixes.
+
* Changes in version 2.4.2 (2010-03-20):
** Some portability problems that resulted in failures and livelocks
-----
-Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
-2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software Foundation,
-Inc.
+Copyright (C) 1995-2011 Free Software Foundation, Inc.
This file is part of Bison, the GNU Parser Generator.
projects / bison.git / blobdiff