\input texinfo @c -*-texinfo-*-
@comment %**start of header
@setfilename bison.info
+@documentencoding UTF-8
+@documentlanguage en
@include version.texi
@settitle Bison @value{VERSION}
@setchapternewpage odd
This manual (@value{UPDATED}) is for GNU Bison (version
@value{VERSION}), the GNU parser generator.
-Copyright @copyright{} 1988-1993, 1995, 1998-2012 Free Software
+Copyright @copyright{} 1988-1993, 1995, 1998-2015 Free Software
Foundation, Inc.
@quotation
* Glossary:: Basic concepts are explained.
* Copying This Manual:: License for copying this manual.
* Bibliography:: Publications cited in this manual.
-* Index:: Cross-references to the text.
+* Index of Terms:: Cross-references to the text.
@detailmenu
--- The Detailed Node Listing ---
* Grammar Outline:: Overall layout of the grammar file.
* Symbols:: Terminal and nonterminal symbols.
* Rules:: How to write grammar rules.
-* Recursion:: Writing recursive rules.
* Semantics:: Semantic values and actions.
* Tracking Locations:: Locations and actions.
* Named References:: Using named references in actions.
* Grammar Rules:: Syntax and usage of the grammar rules section.
* Epilogue:: Syntax and usage of the epilogue.
+Grammar Rules
+
+* Rules Syntax:: Syntax of the rules.
+* Empty Rules:: Symbols that can match the empty string.
+* Recursion:: Writing recursive rules.
+
+
Defining Language Semantics
* Value Type:: Specifying one data type for all semantic values.
* Multiple Types:: Specifying several alternative data types.
+* Type Generation:: Generating the semantic value type.
+* Union Decl:: Declaring the set of all semantic value types.
+* Structured Value Type:: Providing a structured semantic value type.
* Actions:: An action is the semantic definition of a grammar rule.
* Action Types:: Specifying data types for actions to operate on.
* Mid-Rule Actions:: Most actions go at the end of a rule.
This says when, why and how to use the exceptional
action in the middle of a rule.
+Actions in Mid-Rule
+
+* Using Mid-Rule Actions:: Putting an action in the middle of a rule.
+* Mid-Rule Action Translation:: How mid-rule actions are actually processed.
+* Mid-Rule Conflicts:: Mid-rule actions can cause conflicts.
+
Tracking Locations
* Location Type:: Specifying a data type for locations.
* Require Decl:: Requiring a Bison version.
* Token Decl:: Declaring terminal symbols.
* Precedence Decl:: Declaring terminals with precedence and associativity.
-* Union Decl:: Declaring the set of all semantic value types.
* Type Decl:: Declaring the choice of type for a nonterminal symbol.
* Initial Action Decl:: Code run before parsing starts.
* Destructor Decl:: Declaring how symbols are freed.
* Precedence Only:: How to specify precedence only.
* Precedence Examples:: How these features are used in the previous example.
* How Precedence:: How they work.
+* Non Operators:: Using precedence for general conflicts.
Tuning LR
Debugging Your Parser
* Understanding:: Understanding the structure of your parser.
+* Graphviz:: Getting a visual representation of the parser.
+* Xml:: Getting a markup representation of the parser.
* Tracing:: Tracing the execution of your parser.
Tracing Your Parser
* C++ position:: One point in the source file
* C++ location:: Two points in the source file
+* User Defined Location Type:: Required interface for locations
A Complete C++ Example
* Java Parser Interface:: Instantiating and running the parser
* Java Scanner Interface:: Specifying the scanner for the parser
* Java Action Features:: Special features for use in actions
+* Java Push Parser Interface:: Instantiating and running the a push parser
* Java Differences:: Differences between C/C++ and Java Grammars
* Java Declarations Summary:: List of Bison declarations used with Java
@end group
%%
-
-@group
type_decl: TYPE ID '=' type ';' ;
-@end group
@group
type:
%%
prog:
- /* Nothing. */
+ %empty
| prog stmt @{ printf ("\n"); @}
;
@example
/* Reverse polish notation calculator. */
+@group
%@{
- #define YYSTYPE double
#include <stdio.h>
#include <math.h>
int yylex (void);
void yyerror (char const *);
%@}
+@end group
+%define api.value.type @{double@}
%token NUM
%% /* Grammar rules and actions follow. */
The declarations section (@pxref{Prologue, , The prologue}) contains two
preprocessor directives and two forward declarations.
-The @code{#define} directive defines the macro @code{YYSTYPE}, thus
-specifying the C data type for semantic values of both tokens and
-groupings (@pxref{Value Type, ,Data Types of Semantic Values}). The
-Bison parser will use whatever type @code{YYSTYPE} is defined as; if you
-don't define it, @code{int} is the default. Because we specify
-@code{double}, each token and each expression has an associated value,
-which is a floating point number.
-
The @code{#include} directive is used to declare the exponentiation
function @code{pow}.
epilogue, but the parser calls them so they must be declared in the
prologue.
-The second section, Bison declarations, provides information to Bison
-about the token types (@pxref{Bison Declarations, ,The Bison
-Declarations Section}). Each terminal symbol that is not a
-single-character literal must be declared here. (Single-character
-literals normally don't need to be declared.) In this example, all the
-arithmetic operators are designated by single-character literals, so the
-only terminal symbol that needs to be declared is @code{NUM}, the token
-type for numeric constants.
+The second section, Bison declarations, provides information to Bison about
+the tokens and their types (@pxref{Bison Declarations, ,The Bison
+Declarations Section}).
+
+The @code{%define} directive defines the variable @code{api.value.type},
+thus specifying the C data type for semantic values of both tokens and
+groupings (@pxref{Value Type, ,Data Types of Semantic Values}). The Bison
+parser will use whatever type @code{api.value.type} is defined as; if you
+don't define it, @code{int} is the default. Because we specify
+@samp{@{double@}}, each token and each expression has an associated value,
+which is a floating point number. C code can use @code{YYSTYPE} to refer to
+the value @code{api.value.type}.
+
+Each terminal symbol that is not a single-character literal must be
+declared. (Single-character literals normally don't need to be declared.)
+In this example, all the arithmetic operators are designated by
+single-character literals, so the only terminal symbol that needs to be
+declared is @code{NUM}, the token type for numeric constants.
@node Rpcalc Rules
@subsection Grammar Rules for @code{rpcalc}
@example
@group
input:
- /* empty */
+ %empty
| input line
;
@end group
@example
input:
- /* empty */
+ %empty
| input line
;
@end example
colon and the first @samp{|}; this means that @code{input} can match an
empty string of input (no tokens). We write the rules this way because it
is legitimate to type @kbd{Ctrl-d} right after you start the calculator.
-It's conventional to put an empty alternative first and write the comment
-@samp{/* empty */} in it.
+It's conventional to put an empty alternative first and to use the
+(optional) @code{%empty} directive, or to write the comment @samp{/* empty
+*/} in it (@pxref{Empty Rules}).
The second alternate rule (@code{input line}) handles all nontrivial input.
It means, ``After reading any number of lines, read one more line if
The semantic value of the token (if it has one) is stored into the
global variable @code{yylval}, which is where the Bison parser will look
-for it. (The C data type of @code{yylval} is @code{YYSTYPE}, which was
-defined at the beginning of the grammar; @pxref{Rpcalc Declarations,
-,Declarations for @code{rpcalc}}.)
+for it. (The C data type of @code{yylval} is @code{YYSTYPE}, whose value
+was defined at the beginning of the grammar via @samp{%define api.value.type
+@{double@}}; @pxref{Rpcalc Declarations,,Declarations for @code{rpcalc}}.)
A token type code of zero is returned if the end-of-input is encountered.
(Bison recognizes any nonpositive value as indicating end-of-input.)
@comment file: rpcalc.y
@example
-@group
#include <stdio.h>
-@end group
@group
/* Called by yyparse on error. */
@group
%@{
- #define YYSTYPE double
#include <math.h>
#include <stdio.h>
int yylex (void);
@group
/* Bison declarations. */
+%define api.value.type @{double@}
%token NUM
%left '-' '+'
%left '*' '/'
%% /* The grammar follows. */
@group
input:
- /* empty */
+ %empty
| input line
;
@end group
/* Location tracking calculator. */
%@{
- #define YYSTYPE int
#include <math.h>
int yylex (void);
void yyerror (char const *);
%@}
/* Bison declarations. */
+%define api.value.type @{int@}
%token NUM
%left '-' '+'
@example
@group
input:
- /* empty */
+ %empty
| input line
;
@end group
%@{
#include <stdio.h> /* For printf, etc. */
#include <math.h> /* For pow, used in the grammar. */
- #include "calc.h" /* Contains definition of `symrec'. */
+ #include "calc.h" /* Contains definition of 'symrec'. */
int yylex (void);
void yyerror (char const *);
%@}
@end group
-@group
-%union @{
- double val; /* For returning numbers. */
- symrec *tptr; /* For returning symbol-table pointers. */
-@}
-@end group
-%token <val> NUM /* Simple double precision number. */
-%token <tptr> VAR FNCT /* Variable and function. */
-%type <val> exp
+%define api.value.type union /* Generate YYSTYPE from these types: */
+%token <double> NUM /* Simple double precision number. */
+%token <symrec*> VAR FNCT /* Symbol table pointer: variable and function. */
+%type <double> exp
@group
-%right '='
+%precedence '='
%left '-' '+'
%left '*' '/'
%precedence NEG /* negation--unary minus */
These features allow semantic values to have various data types
(@pxref{Multiple Types, ,More Than One Value Type}).
-The @code{%union} declaration specifies the entire list of possible types;
-this is instead of defining @code{YYSTYPE}. The allowable types are now
-double-floats (for @code{exp} and @code{NUM}) and pointers to entries in
-the symbol table. @xref{Union Decl, ,The Collection of Value Types}.
-
-Since values can now have various types, it is necessary to associate a
-type with each grammar symbol whose semantic value is used. These symbols
-are @code{NUM}, @code{VAR}, @code{FNCT}, and @code{exp}. Their
-declarations are augmented with information about their data type (placed
-between angle brackets).
-
-The Bison construct @code{%type} is used for declaring nonterminal
-symbols, just as @code{%token} is used for declaring token types. We
-have not used @code{%type} before because nonterminal symbols are
-normally declared implicitly by the rules that define them. But
-@code{exp} must be declared explicitly so we can specify its value type.
-@xref{Type Decl, ,Nonterminal Symbols}.
+The special @code{union} value assigned to the @code{%define} variable
+@code{api.value.type} specifies that the symbols are defined with their data
+types. Bison will generate an appropriate definition of @code{YYSTYPE} to
+store these values.
+
+Since values can now have various types, it is necessary to associate a type
+with each grammar symbol whose semantic value is used. These symbols are
+@code{NUM}, @code{VAR}, @code{FNCT}, and @code{exp}. Their declarations are
+augmented with their data type (placed between angle brackets). For
+instance, values of @code{NUM} are stored in @code{double}.
+
+The Bison construct @code{%type} is used for declaring nonterminal symbols,
+just as @code{%token} is used for declaring token types. Previously we did
+not use @code{%type} before because nonterminal symbols are normally
+declared implicitly by the rules that define them. But @code{exp} must be
+declared explicitly so we can specify its value type. @xref{Type Decl,
+,Nonterminal Symbols}.
@node Mfcalc Rules
@subsection Grammar Rules for @code{mfcalc}
%% /* The grammar follows. */
@group
input:
- /* empty */
+ %empty
| input line
;
@end group
@group
typedef struct symrec symrec;
-/* The symbol table: a chain of `struct symrec'. */
+/* The symbol table: a chain of 'struct symrec'. */
extern symrec *sym_table;
symrec *putsym (char const *, int);
@end group
@group
-/* The symbol table: a chain of `struct symrec'. */
+/* The symbol table: a chain of 'struct symrec'. */
symrec *sym_table;
@end group
@comment file: mfcalc.y: 3
@example
-@group
#include <ctype.h>
-@end group
@group
int
if (c == '.' || isdigit (c))
@{
ungetc (c, stdin);
- scanf ("%lf", &yylval.val);
+ scanf ("%lf", &yylval.NUM);
return NUM;
@}
@end group
+@end example
+
+@noindent
+Bison generated a definition of @code{YYSTYPE} with a member named
+@code{NUM} to store value of @code{NUM} symbols.
+@comment file: mfcalc.y: 3
+@example
@group
/* Char starts an identifier => read the name. */
if (isalpha (c))
s = getsym (symbuf);
if (s == 0)
s = putsym (symbuf, VAR);
- yylval.tptr = s;
+ *((symrec**) &yylval) = s;
return s->type;
@}
* Grammar Outline:: Overall layout of the grammar file.
* Symbols:: Terminal and nonterminal symbols.
* Rules:: How to write grammar rules.
-* Recursion:: Writing recursive rules.
* Semantics:: Semantic values and actions.
* Tracking Locations:: Locations and actions.
* Named References:: Using named references in actions.
@node Grammar Outline
@section Outline of a Bison Grammar
+@cindex comment
+@findex // @dots{}
+@findex /* @dots{} */
A Bison grammar file has four main sections, shown here with the
appropriate delimiters:
@end example
Comments enclosed in @samp{/* @dots{} */} may appear in any of the sections.
-As a GNU extension, @samp{//} introduces a comment that
-continues until end of line.
+As a GNU extension, @samp{//} introduces a comment that continues until end
+of line.
@menu
* Prologue:: Syntax and usage of the prologue.
@code{%union} declaration.
@example
+@group
%@{
#define _GNU_SOURCE
#include <stdio.h>
#include "ptypes.h"
%@}
+@end group
+@group
%union @{
long int n;
tree t; /* @r{@code{tree} is defined in @file{ptypes.h}.} */
@}
+@end group
+@group
%@{
static void print_token_value (FILE *, int, YYSTYPE);
#define YYPRINT(F, N, L) print_token_value (F, N, L)
%@}
+@end group
@dots{}
@end example
Look again at the example of the previous section:
@example
+@group
%@{
#define _GNU_SOURCE
#include <stdio.h>
#include "ptypes.h"
%@}
+@end group
+@group
%union @{
long int n;
tree t; /* @r{@code{tree} is defined in @file{ptypes.h}.} */
@}
+@end group
+@group
%@{
static void print_token_value (FILE *, int, YYSTYPE);
#define YYPRINT(F, N, L) print_token_value (F, N, L)
%@}
+@end group
@dots{}
@end example
#include <stdio.h>
/* WARNING: The following code really belongs
- * in a `%code requires'; see below. */
+ * in a '%code requires'; see below. */
#include "ptypes.h"
#define YYLTYPE YYLTYPE
@} YYLTYPE;
@}
+@group
%union @{
long int n;
tree t; /* @r{@code{tree} is defined in @file{ptypes.h}.} */
@}
+@end group
+@group
%code @{
static void print_token_value (FILE *, int, YYSTYPE);
#define YYPRINT(F, N, L) print_token_value (F, N, L)
static void trace_token (enum yytokentype token, YYLTYPE loc);
@}
+@end group
@dots{}
@end example
one of your tokens with a @code{%token} declaration.
@node Rules
-@section Syntax of Grammar Rules
+@section Grammar Rules
+
+A Bison grammar is a list of rules.
+
+@menu
+* Rules Syntax:: Syntax of the rules.
+* Empty Rules:: Symbols that can match the empty string.
+* Recursion:: Writing recursive rules.
+@end menu
+
+@node Rules Syntax
+@subsection Syntax of Grammar Rules
@cindex rule syntax
@cindex grammar rule syntax
@cindex syntax of grammar rules
A Bison grammar rule has the following general form:
@example
-@group
@var{result}: @var{components}@dots{};
-@end group
@end example
@noindent
For example,
@example
-@group
exp: exp '+' exp;
-@end group
@end example
@noindent
@noindent
They are still considered distinct rules even when joined in this way.
-If @var{components} in a rule is empty, it means that @var{result} can
-match the empty string. For example, here is how to define a
-comma-separated sequence of zero or more @code{exp} groupings:
+@node Empty Rules
+@subsection Empty Rules
+@cindex empty rule
+@cindex rule, empty
+@findex %empty
+
+A rule is said to be @dfn{empty} if its right-hand side (@var{components})
+is empty. It means that @var{result} can match the empty string. For
+example, here is how to define an optional semicolon:
+
+@example
+semicolon.opt: | ";";
+@end example
+
+@noindent
+It is easy not to see an empty rule, especially when @code{|} is used. The
+@code{%empty} directive allows to make explicit that a rule is empty on
+purpose:
@example
@group
-expseq:
- /* empty */
-| expseq1
+semicolon.opt:
+ %empty
+| ";"
;
@end group
+@end example
+Flagging a non-empty rule with @code{%empty} is an error. If run with
+@option{-Wempty-rule}, @command{bison} will report empty rules without
+@code{%empty}. Using @code{%empty} enables this warning, unless
+@option{-Wno-empty-rule} was specified.
+
+The @code{%empty} directive is a Bison extension, it does not work with
+Yacc. To remain compatible with POSIX Yacc, it is customary to write a
+comment @samp{/* empty */} in each rule with no components:
+
+@example
@group
-expseq1:
- exp
-| expseq1 ',' exp
+semicolon.opt:
+ /* empty */
+| ";"
;
@end group
@end example
-@noindent
-It is customary to write a comment @samp{/* empty */} in each rule
-with no components.
@node Recursion
-@section Recursive Rules
+@subsection Recursive Rules
@cindex recursive rule
+@cindex rule, recursive
A rule is called @dfn{recursive} when its @var{result} nonterminal
appears also on its right hand side. Nearly all Bison grammars need to
@menu
* Value Type:: Specifying one data type for all semantic values.
* Multiple Types:: Specifying several alternative data types.
+* Type Generation:: Generating the semantic value type.
+* Union Decl:: Declaring the set of all semantic value types.
+* Structured Value Type:: Providing a structured semantic value type.
* Actions:: An action is the semantic definition of a grammar rule.
* Action Types:: Specifying data types for actions to operate on.
* Mid-Rule Actions:: Most actions go at the end of a rule.
Bison normally uses the type @code{int} for semantic values if your
program uses the same data type for all language constructs. To
-specify some other type, define @code{YYSTYPE} as a macro, like this:
+specify some other type, define the @code{%define} variable
+@code{api.value.type} like this:
+
+@example
+%define api.value.type @{double@}
+@end example
+
+@noindent
+or
+
+@example
+%define api.value.type @{struct semantic_type@}
+@end example
+
+The value of @code{api.value.type} should be a type name that does not
+contain parentheses or square brackets.
+
+Alternatively, instead of relying of Bison's @code{%define} support, you may
+rely on the C/C++ preprocessor and define @code{YYSTYPE} as a macro, like
+this:
@example
#define YYSTYPE double
@end example
@noindent
-@code{YYSTYPE}'s replacement list should be a type name
-that does not contain parentheses or square brackets.
This macro definition must go in the prologue of the grammar file
-(@pxref{Grammar Outline, ,Outline of a Bison Grammar}).
+(@pxref{Grammar Outline, ,Outline of a Bison Grammar}). If compatibility
+with POSIX Yacc matters to you, use this. Note however that Bison cannot
+know @code{YYSTYPE}'s value, not even whether it is defined, so there are
+services it cannot provide. Besides this works only for languages that have
+a preprocessor.
@node Multiple Types
@subsection More Than One Value Type
@itemize @bullet
@item
-Specify the entire collection of possible data types, either by using the
-@code{%union} Bison declaration (@pxref{Union Decl, ,The Collection of
-Value Types}), or by using a @code{typedef} or a @code{#define} to
-define @code{YYSTYPE} to be a union type whose member names are
-the type tags.
+Specify the entire collection of possible data types. There are several
+options:
+@itemize @bullet
+@item
+let Bison compute the union type from the tags you assign to symbols;
+
+@item
+use the @code{%union} Bison declaration (@pxref{Union Decl, ,The Union
+Declaration});
+
+@item
+define the @code{%define} variable @code{api.value.type} to be a union type
+whose members are the type tags (@pxref{Structured Value Type,, Providing a
+Structured Semantic Value Type});
+
+@item
+use a @code{typedef} or a @code{#define} to define @code{YYSTYPE} to be a
+union type whose member names are the type tags.
+@end itemize
@item
Choose one of those types for each symbol (terminal or nonterminal) for
Decl, ,Nonterminal Symbols}).
@end itemize
+@node Type Generation
+@subsection Generating the Semantic Value Type
+@cindex declaring value types
+@cindex value types, declaring
+@findex %define api.value.type union
+
+The special value @code{union} of the @code{%define} variable
+@code{api.value.type} instructs Bison that the tags used with the
+@code{%token} and @code{%type} directives are genuine types, not names of
+members of @code{YYSTYPE}.
+
+For example:
+
+@example
+%define api.value.type union
+%token <int> INT "integer"
+%token <int> 'n'
+%type <int> expr
+%token <char const *> ID "identifier"
+@end example
+
+@noindent
+generates an appropriate value of @code{YYSTYPE} to support each symbol
+type. The name of the member of @code{YYSTYPE} for tokens than have a
+declared identifier @var{id} (such as @code{INT} and @code{ID} above, but
+not @code{'n'}) is @code{@var{id}}. The other symbols have unspecified
+names on which you should not depend; instead, relying on C casts to access
+the semantic value with the appropriate type:
+
+@example
+/* For an "integer". */
+yylval.INT = 42;
+return INT;
+
+/* For an 'n', also declared as int. */
+*((int*)&yylval) = 42;
+return 'n';
+
+/* For an "identifier". */
+yylval.ID = "42";
+return ID;
+@end example
+
+If the @code{%define} variable @code{api.token.prefix} is defined
+(@pxref{%define Summary,,api.token.prefix}), then it is also used to prefix
+the union member names. For instance, with @samp{%define api.token.prefix
+@{TOK_@}}:
+
+@example
+/* For an "integer". */
+yylval.TOK_INT = 42;
+return TOK_INT;
+@end example
+
+This Bison extension cannot work if @code{%yacc} (or
+@option{-y}/@option{--yacc}) is enabled, as POSIX mandates that Yacc
+generate tokens as macros (e.g., @samp{#define INT 258}, or @samp{#define
+TOK_INT 258}).
+
+This feature is new, and user feedback would be most welcome.
+
+A similar feature is provided for C++ that in addition overcomes C++
+limitations (that forbid non-trivial objects to be part of a @code{union}):
+@samp{%define api.value.type variant}, see @ref{C++ Variants}.
+
+@node Union Decl
+@subsection The Union Declaration
+@cindex declaring value types
+@cindex value types, declaring
+@findex %union
+
+The @code{%union} declaration specifies the entire collection of possible
+data types for semantic values. The keyword @code{%union} is followed by
+braced code containing the same thing that goes inside a @code{union} in C@.
+
+For example:
+
+@example
+@group
+%union @{
+ double val;
+ symrec *tptr;
+@}
+@end group
+@end example
+
+@noindent
+This says that the two alternative types are @code{double} and @code{symrec
+*}. They are given names @code{val} and @code{tptr}; these names are used
+in the @code{%token} and @code{%type} declarations to pick one of the types
+for a terminal or nonterminal symbol (@pxref{Type Decl, ,Nonterminal Symbols}).
+
+As an extension to POSIX, a tag is allowed after the @code{%union}. For
+example:
+
+@example
+@group
+%union value @{
+ double val;
+ symrec *tptr;
+@}
+@end group
+@end example
+
+@noindent
+specifies the union tag @code{value}, so the corresponding C type is
+@code{union value}. If you do not specify a tag, it defaults to
+@code{YYSTYPE} (@pxref{%define Summary,,api.value.union.name}).
+
+As another extension to POSIX, you may specify multiple @code{%union}
+declarations; their contents are concatenated. However, only the first
+@code{%union} declaration can specify a tag.
+
+Note that, unlike making a @code{union} declaration in C, you need not write
+a semicolon after the closing brace.
+
+@node Structured Value Type
+@subsection Providing a Structured Semantic Value Type
+@cindex declaring value types
+@cindex value types, declaring
+@findex %union
+
+Instead of @code{%union}, you can define and use your own union type
+@code{YYSTYPE} if your grammar contains at least one @samp{<@var{type}>}
+tag. For example, you can put the following into a header file
+@file{parser.h}:
+
+@example
+@group
+union YYSTYPE @{
+ double val;
+ symrec *tptr;
+@};
+@end group
+@end example
+
+@noindent
+and then your grammar can use the following instead of @code{%union}:
+
+@example
+@group
+%@{
+#include "parser.h"
+%@}
+%define api.value.type @{union YYSTYPE@}
+%type <val> expr
+%token <tptr> ID
+@end group
+@end example
+
+Actually, you may also provide a @code{struct} rather that a @code{union},
+which may be handy if you want to track information for every symbol (such
+as preceding comments).
+
+The type you provide may even be structured and include pointers, in which
+case the type tags you provide may be composite, with @samp{.} and @samp{->}
+operators.
+
@node Actions
@subsection Actions
@cindex action
following example, the action is triggered only when @samp{b} is found:
@example
-@group
a-or-b: 'a'|'b' @{ a_or_b_found = 1; @};
-@end group
@end example
@cindex default action
@group
bar:
- /* empty */ @{ previous_expr = $0; @}
+ %empty @{ previous_expr = $0; @}
;
@end group
@end example
These actions are written just like usual end-of-rule actions, but they
are executed before the parser even recognizes the following components.
+@menu
+* Using Mid-Rule Actions:: Putting an action in the middle of a rule.
+* Mid-Rule Action Translation:: How mid-rule actions are actually processed.
+* Mid-Rule Conflicts:: Mid-rule actions can cause conflicts.
+@end menu
+
+@node Using Mid-Rule Actions
+@subsubsection Using Mid-Rule Actions
+
A mid-rule action may refer to the components preceding it using
@code{$@var{n}}, but it may not refer to subsequent components because
it is run before they are parsed.
@example
@group
stmt:
- LET '(' var ')'
- @{ $<context>$ = push_context (); declare_variable ($3); @}
+ "let" '(' var ')'
+ @{
+ $<context>$ = push_context ();
+ declare_variable ($3);
+ @}
stmt
- @{ $$ = $6; pop_context ($<context>5); @}
+ @{
+ $$ = $6;
+ pop_context ($<context>5);
+ @}
@end group
@end example
@code{context} in the data-type union. Then it calls
@code{declare_variable} to add the new variable to that list. Once the
first action is finished, the embedded statement @code{stmt} can be
-parsed. Note that the mid-rule action is component number 5, so the
-@samp{stmt} is component number 6.
+parsed.
+
+Note that the mid-rule action is component number 5, so the @samp{stmt} is
+component number 6. Named references can be used to improve the readability
+and maintainability (@pxref{Named References}):
+
+@example
+@group
+stmt:
+ "let" '(' var ')'
+ @{
+ $<context>let = push_context ();
+ declare_variable ($3);
+ @}[let]
+ stmt
+ @{
+ $$ = $6;
+ pop_context ($<context>let);
+ @}
+@end group
+@end example
After the embedded statement is parsed, its semantic value becomes the
value of the entire @code{let}-statement. Then the semantic value from the
@group
%type <context> let
%destructor @{ pop_context ($$); @} let
+@end group
%%
+@group
stmt:
let stmt
@{
$$ = $2;
- pop_context ($1);
+ pop_context ($let);
@};
+@end group
+@group
let:
- LET '(' var ')'
+ "let" '(' var ')'
@{
- $$ = push_context ();
+ $let = push_context ();
declare_variable ($3);
@};
Any mid-rule action can be converted to an end-of-rule action in this way, and
this is what Bison actually does to implement mid-rule actions.
+@node Mid-Rule Action Translation
+@subsubsection Mid-Rule Action Translation
+@vindex $@@@var{n}
+@vindex @@@var{n}
+
+As hinted earlier, mid-rule actions are actually transformed into regular
+rules and actions. The various reports generated by Bison (textual,
+graphical, etc., see @ref{Understanding, , Understanding Your Parser})
+reveal this translation, best explained by means of an example. The
+following rule:
+
+@example
+exp: @{ a(); @} "b" @{ c(); @} @{ d(); @} "e" @{ f(); @};
+@end example
+
+@noindent
+is translated into:
+
+@example
+$@@1: %empty @{ a(); @};
+$@@2: %empty @{ c(); @};
+$@@3: %empty @{ d(); @};
+exp: $@@1 "b" $@@2 $@@3 "e" @{ f(); @};
+@end example
+
+@noindent
+with new nonterminal symbols @code{$@@@var{n}}, where @var{n} is a number.
+
+A mid-rule action is expected to generate a value if it uses @code{$$}, or
+the (final) action uses @code{$@var{n}} where @var{n} denote the mid-rule
+action. In that case its nonterminal is rather named @code{@@@var{n}}:
+
+@example
+exp: @{ a(); @} "b" @{ $$ = c(); @} @{ d(); @} "e" @{ f = $1; @};
+@end example
+
+@noindent
+is translated into
+
+@example
+@@1: %empty @{ a(); @};
+@@2: %empty @{ $$ = c(); @};
+$@@3: %empty @{ d(); @};
+exp: @@1 "b" @@2 $@@3 "e" @{ f = $1; @}
+@end example
+
+There are probably two errors in the above example: the first mid-rule
+action does not generate a value (it does not use @code{$$} although the
+final action uses it), and the value of the second one is not used (the
+final action does not use @code{$3}). Bison reports these errors when the
+@code{midrule-value} warnings are enabled (@pxref{Invocation, ,Invoking
+Bison}):
+
+@example
+$ bison -fcaret -Wmidrule-value mid.y
+@group
+mid.y:2.6-13: warning: unset value: $$
+ exp: @{ a(); @} "b" @{ $$ = c(); @} @{ d(); @} "e" @{ f = $1; @};
+ ^^^^^^^^
+@end group
+@group
+mid.y:2.19-31: warning: unused value: $3
+ exp: @{ a(); @} "b" @{ $$ = c(); @} @{ d(); @} "e" @{ f = $1; @};
+ ^^^^^^^^^^^^^
+@end group
+@end example
+
+
+@node Mid-Rule Conflicts
+@subsubsection Conflicts due to Mid-Rule Actions
Taking action before a rule is completely recognized often leads to
conflicts since the parser must commit to a parse in order to execute the
action. For example, the following two rules, without mid-rule actions,
@example
@group
subroutine:
- /* empty */ @{ prepare_for_local_variables (); @}
+ %empty @{ prepare_for_local_variables (); @}
;
@end group
Now Bison can execute the action in the rule for @code{subroutine} without
deciding which rule for @code{compound} it will eventually use.
+
@node Tracking Locations
@section Tracking Locations
@cindex location
else
@{
$$ = 1;
- fprintf (stderr,
- "Division by zero, l%d,c%d-l%d,c%d",
+ fprintf (stderr, "%d.%d-%d.%d: division by zero",
@@3.first_line, @@3.first_column,
@@3.last_line, @@3.last_column);
@}
else
@{
$$ = 1;
- fprintf (stderr,
- "Division by zero, l%d,c%d-l%d,c%d",
+ fprintf (stderr, "%d.%d-%d.%d: division by zero",
@@3.first_line, @@3.first_column,
@@3.last_line, @@3.last_column);
@}
* Require Decl:: Requiring a Bison version.
* Token Decl:: Declaring terminal symbols.
* Precedence Decl:: Declaring terminals with precedence and associativity.
-* Union Decl:: Declaring the set of all semantic value types.
* Type Decl:: Declaring the choice of type for a nonterminal symbol.
* Initial Action Decl:: Code run before parsing starts.
* Destructor Decl:: Declaring how symbols are freed.
%left OR 134 "<=" 135 // Declares 134 for OR and 135 for "<=".
@end example
-@node Union Decl
-@subsection The Collection of Value Types
-@cindex declaring value types
-@cindex value types, declaring
-@findex %union
-
-The @code{%union} declaration specifies the entire collection of
-possible data types for semantic values. The keyword @code{%union} is
-followed by braced code containing the same thing that goes inside a
-@code{union} in C@.
-
-For example:
-
-@example
-@group
-%union @{
- double val;
- symrec *tptr;
-@}
-@end group
-@end example
-
-@noindent
-This says that the two alternative types are @code{double} and @code{symrec
-*}. They are given names @code{val} and @code{tptr}; these names are used
-in the @code{%token} and @code{%type} declarations to pick one of the types
-for a terminal or nonterminal symbol (@pxref{Type Decl, ,Nonterminal Symbols}).
-
-As an extension to POSIX, a tag is allowed after the
-@code{union}. For example:
-
-@example
-@group
-%union value @{
- double val;
- symrec *tptr;
-@}
-@end group
-@end example
-
-@noindent
-specifies the union tag @code{value}, so the corresponding C type is
-@code{union value}. If you do not specify a tag, it defaults to
-@code{YYSTYPE}.
-
-As another extension to POSIX, you may specify multiple
-@code{%union} declarations; their contents are concatenated. However,
-only the first @code{%union} declaration can specify a tag.
-
-Note that, unlike making a @code{union} declaration in C, you need not write
-a semicolon after the closing brace.
-
-Instead of @code{%union}, you can define and use your own union type
-@code{YYSTYPE} if your grammar contains at least one
-@samp{<@var{type}>} tag. For example, you can put the following into
-a header file @file{parser.h}:
-
-@example
-@group
-union YYSTYPE @{
- double val;
- symrec *tptr;
-@};
-typedef union YYSTYPE YYSTYPE;
-@end group
-@end example
-
-@noindent
-and then your grammar can use the following
-instead of @code{%union}:
-
-@example
-@group
-%@{
-#include "parser.h"
-%@}
-%type <val> expr
-%token <tptr> ID
-@end group
-@end example
-
@node Type Decl
@subsection Nonterminal Symbols
@cindex declaring value types, nonterminals
@noindent
Here @var{nonterminal} is the name of a nonterminal symbol, and
@var{type} is the name given in the @code{%union} to the alternative
-that you want (@pxref{Union Decl, ,The Collection of Value Types}). You
+that you want (@pxref{Union Decl, ,The Union Declaration}). You
can give any number of nonterminal symbols in the same @code{%type}
declaration, if they have the same value type. Use spaces to separate
the symbol names.
@deffn {Directive} %initial-action @{ @var{code} @}
@findex %initial-action
Declare that the braced @var{code} must be invoked before parsing each time
-@code{yyparse} is called. The @var{code} may use @code{$$} and
-@code{@@$} --- initial value and location of the lookahead --- and the
-@code{%parse-param}.
+@code{yyparse} is called. The @var{code} may use @code{$$} (or
+@code{$<@var{tag}>$}) and @code{@@$} --- initial value and location of the
+lookahead --- and the @code{%parse-param}.
@end deffn
For instance, if your locations use a file name, you may use
@deffn {Directive} %destructor @{ @var{code} @} @var{symbols}
@findex %destructor
Invoke the braced @var{code} whenever the parser discards one of the
-@var{symbols}.
-Within @var{code}, @code{$$} designates the semantic value associated
-with the discarded symbol, and @code{@@$} designates its location.
-The additional parser parameters are also available (@pxref{Parser Function, ,
-The Parser Function @code{yyparse}}).
+@var{symbols}. Within @var{code}, @code{$$} (or @code{$<@var{tag}>$})
+designates the semantic value associated with the discarded symbol, and
+@code{@@$} designates its location. The additional parser parameters are
+also available (@pxref{Parser Function, , The Parser Function
+@code{yyparse}}).
When a symbol is listed among @var{symbols}, its @code{%destructor} is called a
per-symbol @code{%destructor}.
@example
%union @{ char *string; @}
-%token <string> STRING1
-%token <string> STRING2
-%type <string> string1
-%type <string> string2
+%token <string> STRING1 STRING2
+%type <string> string1 string2
%union @{ char character; @}
%token <character> CHR
%type <character> chr
the current lookahead and the entire stack (except the current
right-hand side symbols) when the parser returns immediately, and
@item
+the current lookahead and the entire stack (including the current right-hand
+side symbols) when the C++ parser (@file{lalr1.cc}) catches an exception in
+@code{parse},
+@item
the start symbol, when the parser succeeds.
@end itemize
@c This is the same text as for %destructor.
Invoke the braced @var{code} whenever the parser displays one of the
@var{symbols}. Within @var{code}, @code{yyoutput} denotes the output stream
-(a @code{FILE*} in C, and an @code{std::ostream&} in C++),
-@code{$$} designates the semantic value associated with the symbol, and
-@code{@@$} its location. The additional parser parameters are also
-available (@pxref{Parser Function, , The Parser Function @code{yyparse}}).
+(a @code{FILE*} in C, and an @code{std::ostream&} in C++), @code{$$} (or
+@code{$<@var{tag}>$}) designates the semantic value associated with the
+symbol, and @code{@@$} its location. The additional parser parameters are
+also available (@pxref{Parser Function, , The Parser Function
+@code{yyparse}}).
The @var{symbols} are defined as for @code{%destructor} (@pxref{Destructor
Decl, , Freeing Discarded Symbols}.): they can be per-type (e.g.,
@example
%union @{ char *string; @}
-%token <string> STRING1
-%token <string> STRING2
-%type <string> string1
-%type <string> string2
+%token <string> STRING1 STRING2
+%type <string> string1 string2
%union @{ char character; @}
%token <character> CHR
%type <character> chr
@code{string1}, it formats it as a string in double quotes. It performs
only the second @code{%printer} in this case, so it prints only once.
Finally, the parser print @samp{<>} for any symbol, such as @code{TAGLESS},
-that has no semantic type tag. See also
+that has no semantic type tag. @xref{Mfcalc Traces, ,Enabling Debug Traces
+for @code{mfcalc}}, for a complete example.
+
@node Expect Decl
reentrant. It looks like this:
@example
-%define api.pure
+%define api.pure full
@end example
The result is that the communication variables @code{yylval} and
@code{yylex}. @xref{Pure Calling, ,Calling Conventions for Pure
Parsers}, for the details of this. The variable @code{yynerrs}
becomes local in @code{yyparse} in pull mode but it becomes a member
-of yypstate in push mode. (@pxref{Error Reporting, ,The Error
+of @code{yypstate} in push mode. (@pxref{Error Reporting, ,The Error
Reporting Function @code{yyerror}}). The convention for calling
@code{yyparse} itself is unchanged.
what you are doing, your declarations should look like this:
@example
-%define api.pure
+%define api.pure full
%define api.push-pull push
@end example
@deffn {Directive} %union
Declare the collection of data types that semantic values may have
-(@pxref{Union Decl, ,The Collection of Value Types}).
+(@pxref{Union Decl, ,The Union Declaration}).
@end deffn
@deffn {Directive} %token
@deffn {Directive} %define @var{variable}
@deffnx {Directive} %define @var{variable} @var{value}
+@deffnx {Directive} %define @var{variable} @{@var{value}@}
@deffnx {Directive} %define @var{variable} "@var{value}"
Define a variable to adjust Bison's behavior. @xref{%define Summary}.
@end deffn
If you have declared @code{%code requires} or @code{%code provides}, the output
header also contains their code.
@xref{%code Summary}.
+
+@cindex Header guard
+The generated header is protected against multiple inclusions with a C
+preprocessor guard: @samp{YY_@var{PREFIX}_@var{FILE}_INCLUDED}, where
+@var{PREFIX} and @var{FILE} are the prefix (@pxref{Multiple Parsers,
+,Multiple Parsers in the Same Program}) and generated file name turned
+uppercase, with each series of non alphanumerical characters converted to a
+single underscore.
+
+For instance with @samp{%define api.prefix @{calc@}} and @samp{%defines
+"lib/parse.h"}, the header will be guarded as follows.
+@example
+#ifndef YY_CALC_LIB_PARSE_H_INCLUDED
+# define YY_CALC_LIB_PARSE_H_INCLUDED
+...
+#endif /* ! YY_CALC_LIB_PARSE_H_INCLUDED */
+@end example
@end deffn
@deffn {Directive} %defines @var{defines-file}
-Same as above, but save in the file @var{defines-file}.
+Same as above, but save in the file @file{@var{defines-file}}.
@end deffn
@deffn {Directive} %destructor
supported languages include C, C++, and Java.
@var{language} is case-insensitive.
-This directive is experimental and its effect may be modified in future
-releases.
@end deffn
@deffn {Directive} %locations
@end deffn
@deffn {Directive} %output "@var{file}"
-Specify @var{file} for the parser implementation file.
+Generate the parser implementation in @file{@var{file}}.
@end deffn
@deffn {Directive} %pure-parser
@deffn {Directive} %define @var{variable}
@deffnx {Directive} %define @var{variable} @var{value}
+@deffnx {Directive} %define @var{variable} @{@var{value}@}
@deffnx {Directive} %define @var{variable} "@var{value}"
Define @var{variable} to @var{value}.
-@var{value} must be placed in quotation marks if it contains any
-character other than a letter, underscore, period, or non-initial dash
-or digit. Omitting @code{"@var{value}"} entirely is always equivalent
-to specifying @code{""}.
+The type of the values depend on the syntax. Braces denote value in the
+target language (e.g., a namespace, a type, etc.). Keyword values (no
+delimiters) denote finite choice (e.g., a variation of a feature). String
+values denote remaining cases (e.g., a file name).
-It is an error if a @var{variable} is defined by @code{%define}
-multiple times, but see @ref{Bison Options,,-D
-@var{name}[=@var{value}]}.
+It is an error if a @var{variable} is defined by @code{%define} multiple
+times, but see @ref{Bison Options,,-D @var{name}[=@var{value}]}.
@end deffn
The rest of this section summarizes variables and values that
skeleton (@pxref{Decl Summary,,%language}, @pxref{Decl
Summary,,%skeleton}).
Unaccepted @var{variable}s produce an error.
-Some of the accepted @var{variable}s are:
+Some of the accepted @var{variable}s are described below.
-@table @code
@c ================================================== api.namespace
-@item api.namespace
-@findex %define api.namespace
+@deffn Directive {%define api.namespace} @{@var{namespace}@}
@itemize
@item Languages(s): C++
For example, if you specify:
@example
-%define api.namespace "foo::bar"
+%define api.namespace @{foo::bar@}
@end example
Bison uses @code{foo::bar} verbatim in references such as:
lexical analyzer function. For example, if you specify:
@example
-%define api.namespace "foo"
+%define api.namespace @{foo@}
%name-prefix "bar::"
@end example
The parser namespace is @code{foo} and @code{yylex} is referenced as
@code{bar::lex}.
@end itemize
-@c namespace
+@end deffn
+@c api.namespace
+
+@c ================================================== api.location.type
+@deffn {Directive} {%define api.location.type} @{@var{type}@}
+
+@itemize @bullet
+@item Language(s): C++, Java
+@item Purpose: Define the location type.
+@xref{User Defined Location Type}.
+
+@item Accepted Values: String
+
+@item Default Value: none
+
+@item History:
+Introduced in Bison 2.7 for C, C++ and Java. Introduced under the name
+@code{location_type} for C++ in Bison 2.5 and for Java in Bison 2.4.
+@end itemize
+@end deffn
@c ================================================== api.prefix
-@item api.prefix
-@findex %define api.prefix
+@deffn {Directive} {%define api.prefix} @{@var{prefix}@}
@itemize @bullet
@item Language(s): All
-@item Purpose: Rename exported symbols
+@item Purpose: Rename exported symbols.
@xref{Multiple Parsers, ,Multiple Parsers in the Same Program}.
@item Accepted Values: String
@item History: introduced in Bison 2.6
@end itemize
+@end deffn
@c ================================================== api.pure
-@item api.pure
-@findex %define api.pure
+@deffn Directive {%define api.pure} @var{purity}
@itemize @bullet
@item Language(s): C
@item Purpose: Request a pure (reentrant) parser program.
@xref{Pure Decl, ,A Pure (Reentrant) Parser}.
-@item Accepted Values: Boolean
+@item Accepted Values: @code{true}, @code{false}, @code{full}
+
+The value may be omitted: this is equivalent to specifying @code{true}, as is
+the case for Boolean values.
+
+When @code{%define api.pure full} is used, the parser is made reentrant. This
+changes the signature for @code{yylex} (@pxref{Pure Calling}), and also that of
+@code{yyerror} when the tracking of locations has been activated, as shown
+below.
+
+The @code{true} value is very similar to the @code{full} value, the only
+difference is in the signature of @code{yyerror} on Yacc parsers without
+@code{%parse-param}, for historical reasons.
+
+I.e., if @samp{%locations %define api.pure} is passed then the prototypes for
+@code{yyerror} are:
+
+@example
+void yyerror (char const *msg); // Yacc parsers.
+void yyerror (YYLTYPE *locp, char const *msg); // GLR parsers.
+@end example
+
+But if @samp{%locations %define api.pure %parse-param @{int *nastiness@}} is
+used, then both parsers have the same signature:
+
+@example
+void yyerror (YYLTYPE *llocp, int *nastiness, char const *msg);
+@end example
+
+(@pxref{Error Reporting, ,The Error
+Reporting Function @code{yyerror}})
@item Default Value: @code{false}
+
+@item History:
+the @code{full} value was introduced in Bison 2.7
@end itemize
+@end deffn
@c api.pure
@c ================================================== api.push-pull
-@item api.push-pull
-@findex %define api.push-pull
+@deffn Directive {%define api.push-pull} @var{kind}
@itemize @bullet
@item Language(s): C (deterministic parsers only)
@item Default Value: @code{pull}
@end itemize
+@end deffn
@c api.push-pull
-@c ================================================== api.tokens.prefix
-@item api.tokens.prefix
-@findex %define api.tokens.prefix
+@c ================================================== api.token.constructor
+@deffn Directive {%define api.token.constructor}
+
+@itemize @bullet
+@item Language(s):
+C++
+
+@item Purpose:
+When variant-based semantic values are enabled (@pxref{C++ Variants}),
+request that symbols be handled as a whole (type, value, and possibly
+location) in the scanner. @xref{Complete Symbols}, for details.
+
+@item Accepted Values:
+Boolean.
+
+@item Default Value:
+@code{false}
+@item History:
+introduced in Bison 3.0
+@end itemize
+@end deffn
+@c api.token.constructor
+
+
+@c ================================================== api.token.prefix
+@deffn Directive {%define api.token.prefix} @{@var{prefix}@}
@itemize
@item Languages(s): all
@example
%token FILE for ERROR
-%define api.tokens.prefix "TOK_"
+%define api.token.prefix @{TOK_@}
%%
start: FILE for ERROR;
@end example
scanner must use these prefixed token names, while the grammar itself
may still use the short names (as in the sample rule given above). The
generated informational files (@file{*.output}, @file{*.xml},
-@file{*.dot}) are not modified by this prefix. See @ref{Calc++ Parser}
-and @ref{Calc++ Scanner}, for a complete example.
+@file{*.dot}) are not modified by this prefix.
+
+Bison also prefixes the generated member names of the semantic value union.
+@xref{Type Generation,, Generating the Semantic Value Type}, for more
+details.
+
+See @ref{Calc++ Parser} and @ref{Calc++ Scanner}, for a complete example.
@item Accepted Values:
Any string. Should be a valid identifier prefix in the target language,
@item Default Value:
empty
+@item History:
+introduced in Bison 3.0
@end itemize
-@c api.tokens.prefix
+@end deffn
+@c api.token.prefix
-@c ================================================== lex_symbol
-@item lex_symbol
-@findex %define lex_symbol
+@c ================================================== api.value.type
+@deffn Directive {%define api.value.type} @var{support}
+@deffnx Directive {%define api.value.type} @{@var{type}@}
+@itemize @bullet
+@item Language(s):
+all
+
+@item Purpose:
+The type for semantic values.
+
+@item Accepted Values:
+@table @asis
+@item @samp{@{@}}
+This grammar has no semantic value at all. This is not properly supported
+yet.
+@item @samp{union-directive} (C, C++)
+The type is defined thanks to the @code{%union} directive. You don't have
+to define @code{api.value.type} in that case, using @code{%union} suffices.
+@xref{Union Decl, ,The Union Declaration}.
+For instance:
+@example
+%define api.value.type union-directive
+%union
+@{
+ int ival;
+ char *sval;
+@}
+%token <ival> INT "integer"
+%token <sval> STR "string"
+@end example
+
+@item @samp{union} (C, C++)
+The symbols are defined with type names, from which Bison will generate a
+@code{union}. For instance:
+@example
+%define api.value.type union
+%token <int> INT "integer"
+%token <char *> STR "string"
+@end example
+This feature needs user feedback to stabilize. Note that most C++ objects
+cannot be stored in a @code{union}.
+
+@item @samp{variant} (C++)
+This is similar to @code{union}, but special storage techniques are used to
+allow any kind of C++ object to be used. For instance:
+@example
+%define api.value.type variant
+%token <int> INT "integer"
+%token <std::string> STR "string"
+@end example
+This feature needs user feedback to stabilize.
+@xref{C++ Variants}.
+@item @samp{@{@var{type}@}}
+Use this @var{type} as semantic value.
+@example
+%code requires
+@{
+ struct my_value
+ @{
+ enum
+ @{
+ is_int, is_str
+ @} kind;
+ union
+ @{
+ int ival;
+ char *sval;
+ @} u;
+ @};
+@}
+%define api.value.type @{struct my_value@}
+%token <u.ival> INT "integer"
+%token <u.sval> STR "string"
+@end example
+@end table
+
+@item Default Value:
+@itemize @minus
+@item
+@code{union-directive} if @code{%union} is used, otherwise @dots{}
+@item
+@code{int} if type tags are used (i.e., @samp{%token <@var{type}>@dots{}} or
+@samp{%type <@var{type}>@dots{}} is used), otherwise @dots{}
+@item
+undefined.
+@end itemize
+
+@item History:
+introduced in Bison 3.0. Was introduced for Java only in 2.3b as
+@code{stype}.
+@end itemize
+@end deffn
+@c api.value.type
+
+
+@c ================================================== api.value.union.name
+@deffn Directive {%define api.value.union.name} @var{name}
@itemize @bullet
@item Language(s):
-C++
+C
@item Purpose:
-When variant-based semantic values are enabled (@pxref{C++ Variants}),
-request that symbols be handled as a whole (type, value, and possibly
-location) in the scanner. @xref{Complete Symbols}, for details.
+The tag of the generated @code{union} (@emph{not} the name of the
+@code{typedef}). This variable is set to @code{@var{id}} when @samp{%union
+@var{id}} is used. There is no clear reason to give this union a name.
@item Accepted Values:
-Boolean.
+Any valid identifier.
@item Default Value:
-@code{false}
+@code{YYSTYPE}.
+
+@item History:
+Introduced in Bison 3.0.3.
@end itemize
-@c lex_symbol
+@end deffn
+@c api.value.type
+
+@c ================================================== location_type
+@deffn Directive {%define location_type}
+Obsoleted by @code{api.location.type} since Bison 2.7.
+@end deffn
-@c ================================================== lr.default-reductions
-@item lr.default-reductions
-@findex %define lr.default-reductions
+@c ================================================== lr.default-reduction
+
+@deffn Directive {%define lr.default-reduction} @var{when}
@itemize @bullet
@item Language(s): all
@item @code{accepting} if @code{lr.type} is @code{canonical-lr}.
@item @code{most} otherwise.
@end itemize
+@item History:
+introduced as @code{lr.default-reductions} in 2.5, renamed as
+@code{lr.default-reduction} in 3.0.
@end itemize
+@end deffn
-@c ============================================ lr.keep-unreachable-states
+@c ============================================ lr.keep-unreachable-state
-@item lr.keep-unreachable-states
-@findex %define lr.keep-unreachable-states
+@deffn Directive {%define lr.keep-unreachable-state}
@itemize @bullet
@item Language(s): all
remain in the parser tables. @xref{Unreachable States}.
@item Accepted Values: Boolean
@item Default Value: @code{false}
+@item History:
+introduced as @code{lr.keep_unreachable_states} in 2.3b, renamed as
+@code{lr.keep-unreachable-states} in 2.5, and as
+@code{lr.keep-unreachable-state} in 3.0.
@end itemize
-@c lr.keep-unreachable-states
+@end deffn
+@c lr.keep-unreachable-state
@c ================================================== lr.type
-@item lr.type
-@findex %define lr.type
+@deffn Directive {%define lr.type} @var{type}
@itemize @bullet
@item Language(s): all
@item Default Value: @code{lalr}
@end itemize
-
+@end deffn
@c ================================================== namespace
-@item namespace
-@findex %define namespace
+@deffn Directive %define namespace @{@var{namespace}@}
Obsoleted by @code{api.namespace}
@c namespace
-
+@end deffn
@c ================================================== parse.assert
-@item parse.assert
-@findex %define parse.assert
+@deffn Directive {%define parse.assert}
@itemize
@item Languages(s): C++
@item Default Value: @code{false}
@end itemize
+@end deffn
@c parse.assert
@c ================================================== parse.error
-@item parse.error
-@findex %define parse.error
+@deffn Directive {%define parse.error} @var{verbosity}
@itemize
@item Languages(s):
all
@item Default Value:
@code{simple}
@end itemize
+@end deffn
@c parse.error
@c ================================================== parse.lac
-@item parse.lac
-@findex %define parse.lac
+@deffn Directive {%define parse.lac} @var{when}
@itemize
@item Languages(s): C (deterministic parsers only)
@item Accepted Values: @code{none}, @code{full}
@item Default Value: @code{none}
@end itemize
+@end deffn
@c parse.lac
@c ================================================== parse.trace
-@item parse.trace
-@findex %define parse.trace
+@deffn Directive {%define parse.trace}
@itemize
@item Languages(s): C, C++, Java
@xref{Tracing, ,Tracing Your Parser}.
In C/C++, define the macro @code{YYDEBUG} (or @code{@var{prefix}DEBUG} with
-@samp{%define api.prefix @var{prefix}}), see @ref{Multiple Parsers,
+@samp{%define api.prefix @{@var{prefix}@}}), see @ref{Multiple Parsers,
,Multiple Parsers in the Same Program}) to 1 in the parser implementation
file if it is not already defined, so that the debugging facilities are
compiled.
@item Default Value: @code{false}
@end itemize
+@end deffn
@c parse.trace
-@c ================================================== variant
-@item variant
-@findex %define variant
-
-@itemize @bullet
-@item Language(s):
-C++
-
-@item Purpose:
-Request variant-based semantic values.
-@xref{C++ Variants}.
-
-@item Accepted Values:
-Boolean.
-
-@item Default Value:
-@code{false}
-@end itemize
-@c variant
-@end table
-
-
@node %code Summary
@subsection %code Summary
@findex %code
@item Language(s): C, C++
@item Purpose: This is the best place to write dependency code required for
-@code{YYSTYPE} and @code{YYLTYPE}.
-In other words, it's the best place to define types referenced in @code{%union}
-directives, and it's the best place to override Bison's default @code{YYSTYPE}
-and @code{YYLTYPE} definitions.
+@code{YYSTYPE} and @code{YYLTYPE}. In other words, it's the best place to
+define types referenced in @code{%union} directives. If you use
+@code{#define} to override Bison's default @code{YYSTYPE} and @code{YYLTYPE}
+definitions, then it is also the best place. However you should rather
+@code{%define} @code{api.value.type} and @code{api.location.type}.
@item Location(s): The parser header file and the parser implementation file
before the Bison-generated @code{YYSTYPE} and @code{YYLTYPE}
@code{api.prefix}. With different @code{api.prefix}s it is guaranteed that
headers do not conflict when included together, and that compiled objects
can be linked together too. Specifying @samp{%define api.prefix
-@var{prefix}} (or passing the option @samp{-Dapi.prefix=@var{prefix}}, see
+@{@var{prefix}@}} (or passing the option @samp{-Dapi.prefix=@{@var{prefix}@}}, see
@ref{Invocation, ,Invoking Bison}) renames the interface functions and
variables of the Bison parser to start with @var{prefix} instead of
@samp{yy}, and all the macros to start by @var{PREFIX} (i.e., @var{prefix}
@code{YYSTYPE}, @code{YYLTYPE}, and @code{YYDEBUG}, which is treated
specifically --- more about this below.
-For example, if you use @samp{%define api.prefix c}, the names become
+For example, if you use @samp{%define api.prefix @{c@}}, the names become
@code{cparse}, @code{clex}, @dots{}, @code{CSTYPE}, @code{CLTYPE}, and so
on.
@code{YYDEBUG} (not renamed) is used as a default value:
@example
-/* Enabling traces. */
+/* Debug traces. */
#ifndef CDEBUG
# if defined YYDEBUG
# if YYDEBUG
exp: @dots{} @{ @dots{}; *randomness += 1; @dots{} @}
@end example
+@noindent
+Using the following:
+@example
+%parse-param @{int *randomness@}
+@end example
+
+Results in these signatures:
+@example
+void yyerror (int *randomness, const char *msg);
+int yyparse (int *randomness);
+@end example
+
+@noindent
+Or, if both @code{%define api.pure full} (or just @code{%define api.pure})
+and @code{%locations} are used:
+
+@example
+void yyerror (YYLTYPE *llocp, int *randomness, const char *msg);
+int yyparse (int *randomness);
+@end example
+
@node Push Parser Function
@section The Push Parser Function @code{yypush_parse}
@findex yypush_parse
@samp{%define api.push-pull both} declaration is used.
@xref{Push Decl, ,A Push Parser}.
-@deftypefun int yypush_parse (yypstate *yyps)
+@deftypefun int yypush_parse (yypstate *@var{yyps})
The value returned by @code{yypush_parse} is the same as for yyparse with
the following exception: it returns @code{YYPUSH_MORE} if more input is
required to finish parsing the grammar.
declaration is used.
@xref{Push Decl, ,A Push Parser}.
-@deftypefun int yypull_parse (yypstate *yyps)
+@deftypefun int yypull_parse (yypstate *@var{yyps})
The value returned by @code{yypull_parse} is the same as for @code{yyparse}.
@end deftypefun
@samp{%define api.push-pull both} declaration is used.
@xref{Push Decl, ,A Push Parser}.
-@deftypefun void yypstate_delete (yypstate *yyps)
+@deftypefun void yypstate_delete (yypstate *@var{yyps})
This function will reclaim the memory associated with a parser instance.
After this call, you should no longer attempt to use the parser instance.
@end deftypefun
return 0;
@dots{}
if (c == '+' || c == '-')
- return c; /* Assume token type for `+' is '+'. */
+ return c; /* Assume token type for '+' is '+'. */
@dots{}
return INT; /* Return the type of the token. */
@dots{}
When you are using multiple data types, @code{yylval}'s type is a union
made from the @code{%union} declaration (@pxref{Union Decl, ,The
-Collection of Value Types}). So when you store a token's value, you
+Union Declaration}). So when you store a token's value, you
must use the proper member of the union. If the @code{%union}
declaration looks like this:
@node Pure Calling
@subsection Calling Conventions for Pure Parsers
-When you use the Bison declaration @samp{%define api.pure} to request a
+When you use the Bison declaration @code{%define api.pure full} to request a
pure, reentrant parser, the global communication variables @code{yylval}
and @code{yylloc} cannot be used. (@xref{Pure Decl, ,A Pure (Reentrant)
Parser}.) In such parsers the two global variables are replaced by
declarations, which is equivalent to repeating @code{%param}.
@end deffn
+@noindent
For instance:
@example
int yyparse (parser_mode *mode, environment_type *env);
@end example
-If @samp{%define api.pure} is added:
+If @samp{%define api.pure full} is added:
@example
int yylex (YYSTYPE *lvalp, scanner_mode *mode, environment_type *env);
@end example
@noindent
-and finally, if both @samp{%define api.pure} and @code{%locations} are used:
+and finally, if both @samp{%define api.pure full} and @code{%locations} are
+used:
@example
int yylex (YYSTYPE *lvalp, YYLTYPE *llocp,
immediately return 1.
Obviously, in location tracking pure parsers, @code{yyerror} should have
-an access to the current location.
-This is indeed the case for the GLR
-parsers, but not for the Yacc parser, for historical reasons. I.e., if
-@samp{%locations %define api.pure} is passed then the prototypes for
-@code{yyerror} are:
-
-@example
-void yyerror (char const *msg); /* Yacc parsers. */
-void yyerror (YYLTYPE *locp, char const *msg); /* GLR parsers. */
-@end example
+an access to the current location. With @code{%define api.pure}, this is
+indeed the case for the GLR parsers, but not for the Yacc parser, for
+historical reasons, and this is the why @code{%define api.pure full} should be
+prefered over @code{%define api.pure}.
-If @samp{%parse-param @{int *nastiness@}} is used, then:
+When @code{%locations %define api.pure full} is used, @code{yyerror} has the
+following signature:
@example
-void yyerror (int *nastiness, char const *msg); /* Yacc parsers. */
-void yyerror (int *nastiness, char const *msg); /* GLR parsers. */
-@end example
-
-Finally, GLR and Yacc parsers share the same @code{yyerror} calling
-convention for absolutely pure parsers, i.e., when the calling
-convention of @code{yylex} @emph{and} the calling convention of
-@samp{%define api.pure} are pure.
-I.e.:
-
-@example
-/* Location tracking. */
-%locations
-/* Pure yylex. */
-%define api.pure
-%lex-param @{int *nastiness@}
-/* Pure yyparse. */
-%parse-param @{int *nastiness@}
-%parse-param @{int *randomness@}
-@end example
-
-@noindent
-results in the following signatures for all the parser kinds:
-
-@example
-int yylex (YYSTYPE *lvalp, YYLTYPE *llocp, int *nastiness);
-int yyparse (int *nastiness, int *randomness);
-void yyerror (YYLTYPE *locp,
- int *nastiness, int *randomness,
- char const *msg);
+void yyerror (YYLTYPE *locp, char const *msg);
@end example
@noindent
@end deffn
@deffn {Value} @@$
-@findex @@$
Acts like a structure variable containing information on the textual
location of the grouping made by the current rule. @xref{Tracking
Locations}.
@item
@cindex bison-i18n.m4
Into the directory containing the GNU Autoconf macros used
-by the package---often called @file{m4}---copy the
+by the package ---often called @file{m4}--- copy the
@file{bison-i18n.m4} file installed by Bison under
@samp{share/aclocal/bison-i18n.m4} in Bison's installation directory.
For example:
term:
'(' expr ')'
| term '!'
-| NUMBER
+| "number"
;
@end group
@end example
@example
@group
if_stmt:
- IF expr THEN stmt
-| IF expr THEN stmt ELSE stmt
+ "if" expr "then" stmt
+| "if" expr "then" stmt "else" stmt
;
@end group
@end example
@noindent
-Here we assume that @code{IF}, @code{THEN} and @code{ELSE} are
-terminal symbols for specific keyword tokens.
+Here @code{"if"}, @code{"then"} and @code{"else"} are terminal symbols for
+specific keyword tokens.
-When the @code{ELSE} token is read and becomes the lookahead token, the
+When the @code{"else"} token is read and becomes the lookahead token, the
contents of the stack (assuming the input is valid) are just right for
reduction by the first rule. But it is also legitimate to shift the
-@code{ELSE}, because that would lead to eventual reduction by the second
+@code{"else"}, because that would lead to eventual reduction by the second
rule.
This situation, where either a shift or a reduction would be valid, is
operator precedence declarations. To see the reason for this, let's
contrast it with the other alternative.
-Since the parser prefers to shift the @code{ELSE}, the result is to attach
+Since the parser prefers to shift the @code{"else"}, the result is to attach
the else-clause to the innermost if-statement, making these two inputs
equivalent:
@example
-if x then if y then win (); else lose;
+if x then if y then win; else lose;
-if x then do; if y then win (); else lose; end;
+if x then do; if y then win; else lose; end;
@end example
But if the parser chose to reduce when possible rather than shift, the
making these two inputs equivalent:
@example
-if x then if y then win (); else lose;
+if x then if y then win; else lose;
-if x then do; if y then win (); end; else lose;
+if x then do; if y then win; end; else lose;
@end example
The conflict exists because the grammar as written is ambiguous: either
Algol 60 and is called the ``dangling @code{else}'' ambiguity.
To avoid warnings from Bison about predictable, legitimate shift/reduce
-conflicts, use the @code{%expect @var{n}} declaration.
+conflicts, you can use the @code{%expect @var{n}} declaration.
There will be no warning as long as the number of shift/reduce conflicts
is exactly @var{n}, and Bison will report an error if there is a
different number.
-@xref{Expect Decl, ,Suppressing Conflict Warnings}.
+@xref{Expect Decl, ,Suppressing Conflict Warnings}. However, we don't
+recommend the use of @code{%expect} (except @samp{%expect 0}!), as an equal
+number of conflicts does not mean that they are the @emph{same}. When
+possible, you should rather use precedence directives to @emph{fix} the
+conflicts explicitly (@pxref{Non Operators,, Using Precedence For Non
+Operators}).
The definition of @code{if_stmt} above is solely to blame for the
conflict, but the conflict does not actually appear without additional
the conflict:
@example
-@group
-%token IF THEN ELSE variable
%%
-@end group
@group
stmt:
expr
@group
if_stmt:
- IF expr THEN stmt
-| IF expr THEN stmt ELSE stmt
+ "if" expr "then" stmt
+| "if" expr "then" stmt "else" stmt
;
@end group
expr:
- variable
+ "identifier"
;
@end example
* Precedence Only:: How to specify precedence only.
* Precedence Examples:: How these features are used in the previous example.
* How Precedence:: How they work.
+* Non Operators:: Using precedence for general conflicts.
@end menu
@node Why Precedence
The unary-minus is another typical example where associativity is
usually over-specified, see @ref{Infix Calc, , Infix Notation
-Calculator: @code{calc}}. The @code{%left} directive is traditionally
+Calculator - @code{calc}}. The @code{%left} directive is traditionally
used to declare the precedence of @code{NEG}, which is more than needed
since it also defines its associativity. While this is harmless in the
traditional example, who knows how @code{NEG} might be used in future
declared with @code{'-'}:
@example
-%left '<' '>' '=' NE LE GE
+%left '<' '>' '=' "!=" "<=" ">="
%left '+' '-'
%left '*' '/'
@end example
-@noindent
-(Here @code{NE} and so on stand for the operators for ``not equal''
-and so on. We assume that these tokens are more than one character long
-and therefore are represented by names, not character literals.)
-
@node How Precedence
@subsection How Precedence Works
Not all rules and not all tokens have precedence. If either the rule or
the lookahead token has no precedence, then the default is to shift.
+@node Non Operators
+@subsection Using Precedence For Non Operators
+
+Using properly precedence and associativity directives can help fixing
+shift/reduce conflicts that do not involve arithmetics-like operators. For
+instance, the ``dangling @code{else}'' problem (@pxref{Shift/Reduce, ,
+Shift/Reduce Conflicts}) can be solved elegantly in two different ways.
+
+In the present case, the conflict is between the token @code{"else"} willing
+to be shifted, and the rule @samp{if_stmt: "if" expr "then" stmt}, asking
+for reduction. By default, the precedence of a rule is that of its last
+token, here @code{"then"}, so the conflict will be solved appropriately
+by giving @code{"else"} a precedence higher than that of @code{"then"}, for
+instance as follows:
+
+@example
+@group
+%precedence "then"
+%precedence "else"
+@end group
+@end example
+
+Alternatively, you may give both tokens the same precedence, in which case
+associativity is used to solve the conflict. To preserve the shift action,
+use right associativity:
+
+@example
+%right "then" "else"
+@end example
+
+Neither solution is perfect however. Since Bison does not provide, so far,
+``scoped'' precedence, both force you to declare the precedence
+of these keywords with respect to the other operators your grammar.
+Therefore, instead of being warned about new conflicts you would be unaware
+of (e.g., a shift/reduce conflict due to @samp{if test then 1 else 2 + 3}
+being ambiguous: @samp{if test then 1 else (2 + 3)} or @samp{(if test then 1
+else 2) + 3}?), the conflict will be already ``fixed''.
+
@node Contextual Precedence
@section Context-Dependent Precedence
@cindex context-dependent precedence
@example
@group
sequence:
- /* empty */ @{ printf ("empty sequence\n"); @}
+ %empty @{ printf ("empty sequence\n"); @}
| maybeword
| sequence word @{ printf ("added word %s\n", $2); @}
;
@group
maybeword:
- /* empty */ @{ printf ("empty maybeword\n"); @}
-| word @{ printf ("single word %s\n", $1); @}
+ %empty @{ printf ("empty maybeword\n"); @}
+| word @{ printf ("single word %s\n", $1); @}
;
@end group
@end example
proper way to define @code{sequence}:
@example
+@group
sequence:
- /* empty */ @{ printf ("empty sequence\n"); @}
+ %empty @{ printf ("empty sequence\n"); @}
| sequence word @{ printf ("added word %s\n", $2); @}
;
+@end group
@end example
Here is another common error that yields a reduce/reduce conflict:
@example
+@group
sequence:
- /* empty */
+ %empty
| sequence words
| sequence redirects
;
+@end group
+@group
words:
- /* empty */
+ %empty
| words word
;
+@end group
+@group
redirects:
- /* empty */
+ %empty
| redirects redirect
;
+@end group
@end example
@noindent
@example
sequence:
- /* empty */
+ %empty
| sequence word
| sequence redirect
;
@example
@group
sequence:
- /* empty */
+ %empty
| sequence words
| sequence redirects
;
@end group
@end example
+Yet this proposal introduces another kind of ambiguity! The input
+@samp{word word} can be parsed as a single @code{words} composed of two
+@samp{word}s, or as two one-@code{word} @code{words} (and likewise for
+@code{redirect}/@code{redirects}). However this ambiguity is now a
+shift/reduce conflict, and therefore it can now be addressed with precedence
+directives.
+
+To simplify the matter, we will proceed with @code{word} and @code{redirect}
+being tokens: @code{"word"} and @code{"redirect"}.
+
+To prefer the longest @code{words}, the conflict between the token
+@code{"word"} and the rule @samp{sequence: sequence words} must be resolved
+as a shift. To this end, we use the same techniques as exposed above, see
+@ref{Non Operators,, Using Precedence For Non Operators}. One solution
+relies on precedences: use @code{%prec} to give a lower precedence to the
+rule:
+
+@example
+%precedence "word"
+%precedence "sequence"
+%%
+@group
+sequence:
+ %empty
+| sequence word %prec "sequence"
+| sequence redirect %prec "sequence"
+;
+@end group
+
+@group
+words:
+ word
+| words "word"
+;
+@end group
+@end example
+
+Another solution relies on associativity: provide both the token and the
+rule with the same precedence, but make them right-associative:
+
+@example
+%right "word" "redirect"
+%%
+@group
+sequence:
+ %empty
+| sequence word %prec "word"
+| sequence redirect %prec "redirect"
+;
+@end group
+@end example
+
@node Mysterious Conflicts
@section Mysterious Conflicts
@cindex Mysterious Conflicts
@example
@group
-%token ID
-
%%
def: param_spec return_spec ',';
param_spec:
| name_list ':' type
;
@end group
+
@group
return_spec:
type
| name ':' type
;
@end group
+
+type: "id";
+
@group
-type: ID;
-@end group
-@group
-name: ID;
+name: "id";
name_list:
name
| name ',' name_list
@end group
@end example
-It would seem that this grammar can be parsed with only a single token
-of lookahead: when a @code{param_spec} is being read, an @code{ID} is
-a @code{name} if a comma or colon follows, or a @code{type} if another
-@code{ID} follows. In other words, this grammar is LR(1).
+It would seem that this grammar can be parsed with only a single token of
+lookahead: when a @code{param_spec} is being read, an @code{"id"} is a
+@code{name} if a comma or colon follows, or a @code{type} if another
+@code{"id"} follows. In other words, this grammar is LR(1).
@cindex LR
@cindex LALR
However, for historical reasons, Bison cannot by default handle all
LR(1) grammars.
-In this grammar, two contexts, that after an @code{ID} at the beginning
+In this grammar, two contexts, that after an @code{"id"} at the beginning
of a @code{param_spec} and likewise at the beginning of a
@code{return_spec}, are similar enough that Bison assumes they are the
same.
@example
@group
-%token BOGUS
-@dots{}
-%%
@dots{}
return_spec:
type
| name ':' type
-| ID BOGUS /* This rule is never used. */
+| "id" "bogus" /* This rule is never used. */
;
@end group
@end example
This corrects the problem because it introduces the possibility of an
-additional active rule in the context after the @code{ID} at the beginning of
+additional active rule in the context after the @code{"id"} at the beginning of
@code{return_spec}. This rule is not active in the corresponding context
in a @code{param_spec}, so the two contexts receive distinct parser states.
-As long as the token @code{BOGUS} is never generated by @code{yylex},
+As long as the token @code{"bogus"} is never generated by @code{yylex},
the added rule cannot alter the way actual input is parsed.
In this particular example, there is another way to solve the problem:
-rewrite the rule for @code{return_spec} to use @code{ID} directly
+rewrite the rule for @code{return_spec} to use @code{"id"} directly
instead of via @code{name}. This also causes the two confusing
contexts to have different sets of active rules, because the one for
@code{return_spec} activates the altered rule for @code{return_spec}
rather than the one for @code{name}.
@example
+@group
param_spec:
type
| name_list ':' type
;
+@end group
+
+@group
return_spec:
type
-| ID ':' type
+| "id" ':' type
;
+@end group
@end example
For a more detailed exposition of LALR(1) parsers and parser
parser table construction algorithm by using the @code{%define lr.type}
directive.
-@deffn {Directive} {%define lr.type @var{TYPE}}
+@deffn {Directive} {%define lr.type} @var{type}
Specify the type of parser tables within the LR(1) family. The accepted
-values for @var{TYPE} are:
+values for @var{type} are:
@itemize
@item @code{lalr} (default)
@cindex GLR with LALR
When employing GLR parsers (@pxref{GLR Parsers}), if you do not resolve any
-conflicts statically (for example, with @code{%left} or @code{%prec}), then
+conflicts statically (for example, with @code{%left} or @code{%precedence}),
+then
the parser explores all potential parses of any given input. In this case,
the choice of parser table construction algorithm is guaranteed not to alter
the language accepted by the parser. LALR parser tables are the smallest
@node Default Reductions
@subsection Default Reductions
@cindex default reductions
-@findex %define lr.default-reductions
+@findex %define lr.default-reduction
@findex %nonassoc
After parser table construction, Bison identifies the reduction with the
split the parse instead.
To adjust which states have default reductions enabled, use the
-@code{%define lr.default-reductions} directive.
+@code{%define lr.default-reduction} directive.
-@deffn {Directive} {%define lr.default-reductions @var{WHERE}}
+@deffn {Directive} {%define lr.default-reduction} @var{where}
Specify the kind of states that are permitted to contain default reductions.
-The accepted values of @var{WHERE} are:
+The accepted values of @var{where} are:
@itemize
@item @code{most} (default for LALR and IELR)
@item @code{consistent}
sacrificing @code{%nonassoc}, default reductions, or state merging. You can
enable LAC with the @code{%define parse.lac} directive.
-@deffn {Directive} {%define parse.lac @var{VALUE}}
+@deffn {Directive} {%define parse.lac} @var{value}
Enable LAC to improve syntax error handling.
@itemize
@item @code{none} (default)
@node Unreachable States
@subsection Unreachable States
-@findex %define lr.keep-unreachable-states
+@findex %define lr.keep-unreachable-state
@cindex unreachable states
If there exists no sequence of transitions from the parser's start state to
keeping unreachable states is sometimes useful when trying to understand the
relationship between the parser and the grammar.
-@deffn {Directive} {%define lr.keep-unreachable-states @var{VALUE}}
+@deffn {Directive} {%define lr.keep-unreachable-state} @var{value}
Request that Bison allow unreachable states to remain in the parser tables.
-@var{VALUE} must be a Boolean. The default is @code{false}.
+@var{value} must be a Boolean. The default is @code{false}.
@end deffn
There are a few caveats to consider:
@example
stmts:
- /* empty string */
+ %empty
| stmts '\n'
| stmts exp '\n'
| stmts error '\n'
Developing a parser can be a challenge, especially if you don't understand
the algorithm (@pxref{Algorithm, ,The Bison Parser Algorithm}). This
-chapter explains how to generate and read the detailed description of the
-automaton, and how to enable and understand the parser run-time traces.
+chapter explains how understand and debug a parser.
+
+The first sections focus on the static part of the parser: its structure.
+They explain how to generate and read the detailed description of the
+automaton. There are several formats available:
+@itemize @minus
+@item
+as text, see @ref{Understanding, , Understanding Your Parser};
+
+@item
+as a graph, see @ref{Graphviz,, Visualizing Your Parser};
+
+@item
+or as a markup report that can be turned, for instance, into HTML, see
+@ref{Xml,, Visualizing your parser in multiple formats}.
+@end itemize
+
+The last section focuses on the dynamic part of the parser: how to enable
+and understand the parser run-time traces (@pxref{Tracing, ,Tracing Your
+Parser}).
@menu
* Understanding:: Understanding the structure of your parser.
+* Graphviz:: Getting a visual representation of the parser.
+* Xml:: Getting a markup representation of the parser.
* Tracing:: Tracing the execution of your parser.
@end menu
As documented elsewhere (@pxref{Algorithm, ,The Bison Parser Algorithm})
Bison parsers are @dfn{shift/reduce automata}. In some cases (much more
frequent than one would hope), looking at this automaton is required to
-tune or simply fix a parser. Bison provides two different
-representation of it, either textually or graphically (as a DOT file).
+tune or simply fix a parser.
The textual file is generated when the options @option{--report} or
@option{--verbose} are specified, see @ref{Invocation, , Invoking
@example
%token NUM STR
+@group
%left '+' '-'
%left '*'
+@end group
%%
+@group
exp:
exp '+' exp
| exp '-' exp
| exp '/' exp
| NUM
;
+@end group
useless: STR;
%%
@end example
@example
calc.y: warning: 1 nonterminal useless in grammar
calc.y: warning: 1 rule useless in grammar
-calc.y:11.1-7: warning: nonterminal useless in grammar: useless
-calc.y:11.10-12: warning: rule useless in grammar: useless: STR
+calc.y:12.1-7: warning: nonterminal useless in grammar: useless
+calc.y:12.10-12: warning: rule useless in grammar: useless: STR
calc.y: conflicts: 7 shift/reduce
@end example
the location of the input cursor.
@example
-state 0
+State 0
0 $accept: . exp $end
@option{--report=itemset} to list the derived items as well:
@example
-state 0
+State 0
0 $accept: . exp $end
1 exp: . exp '+' exp
In the state 1@dots{}
@example
-state 1
+State 1
5 exp: NUM .
@noindent
the rule 5, @samp{exp: NUM;}, is completed. Whatever the lookahead token
(@samp{$default}), the parser will reduce it. If it was coming from
-state 0, then, after this reduction it will return to state 0, and will
+State 0, then, after this reduction it will return to state 0, and will
jump to state 2 (@samp{exp: go to state 2}).
@example
-state 2
+State 2
0 $accept: exp . $end
1 exp: exp . '+' exp
state}:
@example
-state 3
+State 3
0 $accept: exp $end .
the reader.
@example
-state 4
+State 4
1 exp: exp '+' . exp
exp go to state 8
-state 5
+State 5
2 exp: exp '-' . exp
exp go to state 9
-state 6
+State 6
3 exp: exp '*' . exp
exp go to state 10
-state 7
+State 7
4 exp: exp '/' . exp
1 shift/reduce}:
@example
-state 8
+State 8
1 exp: exp . '+' exp
1 | exp '+' exp .
@option{--report=lookahead}, Bison specifies these lookahead tokens:
@example
-state 8
+State 8
1 exp: exp . '+' exp
1 | exp '+' exp . [$end, '+', '-', '/']
@example
@group
-state 9
+State 9
1 exp: exp . '+' exp
2 | exp . '-' exp
@end group
@group
-state 10
+State 10
1 exp: exp . '+' exp
2 | exp . '-' exp
@end group
@group
-state 11
+State 11
1 exp: exp . '+' exp
2 | exp . '-' exp
@noindent
Observe that state 11 contains conflicts not only due to the lack of
-precedence of @samp{/} with respect to @samp{+}, @samp{-}, and
-@samp{*}, but also because the
-associativity of @samp{/} is not specified.
+precedence of @samp{/} with respect to @samp{+}, @samp{-}, and @samp{*}, but
+also because the associativity of @samp{/} is not specified.
+
+Bison may also produce an HTML version of this output, via an XML file and
+XSLT processing (@pxref{Xml,,Visualizing your parser in multiple formats}).
+
+@c ================================================= Graphical Representation
+
+@node Graphviz
+@section Visualizing Your Parser
+@cindex dot
+
+As another means to gain better understanding of the shift/reduce
+automaton corresponding to the Bison parser, a DOT file can be generated. Note
+that debugging a real grammar with this is tedious at best, and impractical
+most of the times, because the generated files are huge (the generation of
+a PDF or PNG file from it will take very long, and more often than not it will
+fail due to memory exhaustion). This option was rather designed for beginners,
+to help them understand LR parsers.
+
+This file is generated when the @option{--graph} option is specified
+(@pxref{Invocation, , Invoking Bison}). Its name is made by removing
+@samp{.tab.c} or @samp{.c} from the parser implementation file name, and
+adding @samp{.dot} instead. If the grammar file is @file{foo.y}, the
+Graphviz output file is called @file{foo.dot}. A DOT file may also be
+produced via an XML file and XSLT processing (@pxref{Xml,,Visualizing your
+parser in multiple formats}).
+
+
+The following grammar file, @file{rr.y}, will be used in the sequel:
+
+@example
+%%
+@group
+exp: a ";" | b ".";
+a: "0";
+b: "0";
+@end group
+@end example
+
+The graphical output
+@ifnotinfo
+(see @ref{fig:graph})
+@end ifnotinfo
+is very similar to the textual one, and as such it is easier understood by
+making direct comparisons between them. @xref{Debugging, , Debugging Your
+Parser}, for a detailled analysis of the textual report.
+
+@ifnotinfo
+@float Figure,fig:graph
+@image{figs/example, 430pt}
+@caption{A graphical rendering of the parser.}
+@end float
+@end ifnotinfo
+
+@subheading Graphical Representation of States
+
+The items (pointed rules) for each state are grouped together in graph nodes.
+Their numbering is the same as in the verbose file. See the following points,
+about transitions, for examples
+
+When invoked with @option{--report=lookaheads}, the lookahead tokens, when
+needed, are shown next to the relevant rule between square brackets as a
+comma separated list. This is the case in the figure for the representation of
+reductions, below.
+
+@sp 1
+
+The transitions are represented as directed edges between the current and
+the target states.
+
+@subheading Graphical Representation of Shifts
+
+Shifts are shown as solid arrows, labelled with the lookahead token for that
+shift. The following describes a reduction in the @file{rr.output} file:
+
+@example
+@group
+State 3
+
+ 1 exp: a . ";"
+
+ ";" shift, and go to state 6
+@end group
+@end example
+
+A Graphviz rendering of this portion of the graph could be:
+
+@center @image{figs/example-shift, 100pt}
+
+@subheading Graphical Representation of Reductions
+
+Reductions are shown as solid arrows, leading to a diamond-shaped node
+bearing the number of the reduction rule. The arrow is labelled with the
+appropriate comma separated lookahead tokens. If the reduction is the default
+action for the given state, there is no such label.
+
+This is how reductions are represented in the verbose file @file{rr.output}:
+@example
+State 1
+
+ 3 a: "0" . [";"]
+ 4 b: "0" . ["."]
+
+ "." reduce using rule 4 (b)
+ $default reduce using rule 3 (a)
+@end example
+
+A Graphviz rendering of this portion of the graph could be:
+
+@center @image{figs/example-reduce, 120pt}
+
+When unresolved conflicts are present, because in deterministic parsing
+a single decision can be made, Bison can arbitrarily choose to disable a
+reduction, see @ref{Shift/Reduce, , Shift/Reduce Conflicts}. Discarded actions
+are distinguished by a red filling color on these nodes, just like how they are
+reported between square brackets in the verbose file.
+
+The reduction corresponding to the rule number 0 is the acceptation
+state. It is shown as a blue diamond, labelled ``Acc''.
+
+@subheading Graphical representation of go tos
+
+The @samp{go to} jump transitions are represented as dotted lines bearing
+the name of the rule being jumped to.
+
+@c ================================================= XML
+
+@node Xml
+@section Visualizing your parser in multiple formats
+@cindex xml
+
+Bison supports two major report formats: textual output
+(@pxref{Understanding, ,Understanding Your Parser}) when invoked
+with option @option{--verbose}, and DOT
+(@pxref{Graphviz,, Visualizing Your Parser}) when invoked with
+option @option{--graph}. However,
+another alternative is to output an XML file that may then be, with
+@command{xsltproc}, rendered as either a raw text format equivalent to the
+verbose file, or as an HTML version of the same file, with clickable
+transitions, or even as a DOT. The @file{.output} and DOT files obtained via
+XSLT have no difference whatsoever with those obtained by invoking
+@command{bison} with options @option{--verbose} or @option{--graph}.
+
+The XML file is generated when the options @option{-x} or
+@option{--xml[=FILE]} are specified, see @ref{Invocation,,Invoking Bison}.
+If not specified, its name is made by removing @samp{.tab.c} or @samp{.c}
+from the parser implementation file name, and adding @samp{.xml} instead.
+For instance, if the grammar file is @file{foo.y}, the default XML output
+file is @file{foo.xml}.
+
+Bison ships with a @file{data/xslt} directory, containing XSL Transformation
+files to apply to the XML file. Their names are non-ambiguous:
+
+@table @file
+@item xml2dot.xsl
+Used to output a copy of the DOT visualization of the automaton.
+@item xml2text.xsl
+Used to output a copy of the @samp{.output} file.
+@item xml2xhtml.xsl
+Used to output an xhtml enhancement of the @samp{.output} file.
+@end table
+
+Sample usage (requires @command{xsltproc}):
+@example
+$ bison -x gr.y
+@group
+$ bison --print-datadir
+/usr/local/share/bison
+@end group
+$ xsltproc /usr/local/share/bison/xslt/xml2xhtml.xsl gr.xml >gr.html
+@end example
+@c ================================================= Tracing
@node Tracing
@section Tracing Your Parser
If the @code{%define} variable @code{api.prefix} is used (@pxref{Multiple
Parsers, ,Multiple Parsers in the Same Program}), for instance @samp{%define
api.prefix x}, then if @code{CDEBUG} is defined, its value controls the
-tracing feature (enabled iff nonzero); otherwise tracing is enabled iff
-@code{YYDEBUG} is nonzero.
+tracing feature (enabled if and only if nonzero); otherwise tracing is
+enabled if and only if @code{YYDEBUG} is nonzero.
@item the option @option{-t} (POSIX Yacc compliant)
@itemx the option @option{--debug} (Bison extension)
Use the @samp{-t} option when you run Bison (@pxref{Invocation, ,Invoking
-Bison}). With @samp{%define api.prefix c}, it defines @code{CDEBUG} to 1,
+Bison}). With @samp{%define api.prefix @{c@}}, it defines @code{CDEBUG} to 1,
otherwise it defines @code{YYDEBUG} to 1.
@item the directive @samp{%debug}
/* Formatting semantic values. */
%printer @{ fprintf (yyoutput, "%s", $$->name); @} VAR;
%printer @{ fprintf (yyoutput, "%s()", $$->name); @} FNCT;
-%printer @{ fprintf (yyoutput, "%g", $$); @} <val>;
+%printer @{ fprintf (yyoutput, "%g", $$); @} <double>;
@end example
The @code{%define} directive instructs Bison to generate run-time trace
The set of @code{%printer} directives demonstrates how to format the
semantic value in the traces. Note that the specification can be done
either on the symbol type (e.g., @code{VAR} or @code{FNCT}), or on the type
-tag: since @code{<val>} is the type for both @code{NUM} and @code{exp}, this
-printer will be used for them.
+tag: since @code{<double>} is the type for both @code{NUM} and @code{exp},
+this printer will be used for them.
Here is a sample of the information provided by run-time traces. The traces
are sent onto standard error.
@noindent
The previous reduction demonstrates the @code{%printer} directive for
-@code{<val>}: both the token @code{NUM} and the resulting non-terminal
+@code{<double>}: both the token @code{NUM} and the resulting nonterminal
@code{exp} have @samp{1} as value.
@example
short option. It is followed by a cross key alphabetized by long
option.
-@c Please, keep this ordered as in `bison --help'.
+@c Please, keep this ordered as in 'bison --help'.
@noindent
Operations modes:
@table @option
conflicts is not reported, so @option{-W} and @option{--warning} then have
no effect on the conflict report.
+@item deprecated
+Deprecated constructs whose support will be removed in future versions of
+Bison.
+
+@item empty-rule
+Empty rules without @code{%empty}. @xref{Empty Rules}. Disabled by
+default, but enabled by uses of @code{%empty}, unless
+@option{-Wno-empty-rule} was specified.
+
+@item precedence
+Useless precedence and associativity directives. Disabled by default.
+
+Consider for instance the following grammar:
+
+@example
+@group
+%nonassoc "="
+%left "+"
+%left "*"
+%precedence "("
+@end group
+%%
+@group
+stmt:
+ exp
+| "var" "=" exp
+;
+@end group
+
+@group
+exp:
+ exp "+" exp
+| exp "*" "num"
+| "(" exp ")"
+| "num"
+;
+@end group
+@end example
+
+Bison reports:
+
+@c cannot leave the location and the [-Wprecedence] for lack of
+@c width in PDF.
+@example
+@group
+warning: useless precedence and associativity for "="
+ %nonassoc "="
+ ^^^
+@end group
+@group
+warning: useless associativity for "*", use %precedence
+ %left "*"
+ ^^^
+@end group
+@group
+warning: useless precedence for "("
+ %precedence "("
+ ^^^
+@end group
+@end example
+
+One would get the exact same parser with the following directives instead:
+
+@example
+@group
+%left "+"
+%precedence "*"
+@end group
+@end example
+
@item other
All warnings not categorized above. These warnings are enabled by default.
categories.
@item all
-All the warnings.
+All the warnings except @code{yacc}.
+
@item none
Turn off all the warnings.
+
@item error
-Treat warnings as errors.
+See @option{-Werror}, below.
@end table
A category can be turned off by prefixing its name with @samp{no-}. For
instance, @option{-Wno-yacc} will hide the warnings about
POSIX Yacc incompatibilities.
+
+@item -Werror
+Turn enabled warnings for every @var{category} into errors, unless they are
+explicitly disabled by @option{-Wno-error=@var{category}}.
+
+@item -Werror=@var{category}
+Enable warnings falling in @var{category}, and treat them as errors.
+
+@var{category} is the same as for @option{--warnings}, with the exception that
+it may not be prefixed with @samp{no-} (see above).
+
+Note that the precedence of the @samp{=} and @samp{,} operators is such that
+the following commands are @emph{not} equivalent, as the first will not treat
+S/R conflicts as errors.
+
+@example
+$ bison -Werror=yacc,conflicts-sr input.y
+$ bison -Werror=yacc,error=conflicts-sr input.y
+@end example
+
+@item -Wno-error
+Do not turn enabled warnings for every @var{category} into errors, unless
+they are explicitly enabled by @option{-Werror=@var{category}}.
+
+@item -Wno-error=@var{category}
+Deactivate the error treatment for this @var{category}. However, the warning
+itself won't be disabled, or enabled, by this option.
+
+@item -f [@var{feature}]
+@itemx --feature[=@var{feature}]
+Activate miscellaneous @var{feature}. @var{feature} can be one of:
+@table @code
+@item caret
+@itemx diagnostics-show-caret
+Show caret errors, in a manner similar to GCC's
+@option{-fdiagnostics-show-caret}, or Clang's @option{-fcaret-diagnotics}. The
+location provided with the message is used to quote the corresponding line of
+the source file, underlining the important part of it with carets (^). Here is
+an example, using the following file @file{in.y}:
+
+@example
+%type <ival> exp
+%%
+exp: exp '+' exp @{ $exp = $1 + $2; @};
+@end example
+
+When invoked with @option{-fcaret} (or nothing), Bison will report:
+
+@example
+@group
+in.y:3.20-23: error: ambiguous reference: '$exp'
+ exp: exp '+' exp @{ $exp = $1 + $2; @};
+ ^^^^
+@end group
+@group
+in.y:3.1-3: refers to: $exp at $$
+ exp: exp '+' exp @{ $exp = $1 + $2; @};
+ ^^^
+@end group
+@group
+in.y:3.6-8: refers to: $exp at $1
+ exp: exp '+' exp @{ $exp = $1 + $2; @};
+ ^^^
+@end group
+@group
+in.y:3.14-16: refers to: $exp at $3
+ exp: exp '+' exp @{ $exp = $1 + $2; @};
+ ^^^
+@end group
+@group
+in.y:3.32-33: error: $2 of 'exp' has no declared type
+ exp: exp '+' exp @{ $exp = $1 + $2; @};
+ ^^
+@end group
+@end example
+
+Whereas, when invoked with @option{-fno-caret}, Bison will only report:
+
+@example
+@group
+in.y:3.20-23: error: ambiguous reference: ‘$exp’
+in.y:3.1-3: refers to: $exp at $$
+in.y:3.6-8: refers to: $exp at $1
+in.y:3.14-16: refers to: $exp at $3
+in.y:3.32-33: error: $2 of ‘exp’ has no declared type
+@end group
+@end example
+
+This option is activated by default.
+
+@end table
@end table
@noindent
Summary}). Currently supported languages include C, C++, and Java.
@var{language} is case-insensitive.
-This option is experimental and its effect may be modified in future
-releases.
-
@item --locations
Pretend that @code{%locations} was specified. @xref{Decl Summary}.
Description of the grammar, conflicts (resolved and unresolved), and
parser's automaton.
+@item itemset
+Implies @code{state} and augments the description of the automaton with
+the full set of items for each state, instead of its core only.
+
@item lookahead
Implies @code{state} and augments the description of the automaton with
each rule's lookahead set.
-@item itemset
-Implies @code{state} and augments the description of the automaton with
-the full set of items for each state, instead of its core only.
+@item solved
+Implies @code{state}. Explain how conflicts were solved thanks to
+precedence and associativity directives.
+
+@item all
+Enable all the items.
+
+@item none
+Do not generate the report.
@end table
@item --report-file=@var{file}
int yyerror (char const *);
@end example
-Bison ignores the @code{int} value returned by this @code{yyerror}.
-If you use the Yacc library's @code{main} function, your
-@code{yyparse} function should have the following type signature:
+@noindent
+The @code{int} value returned by this @code{yyerror} is ignored.
+
+The implementation of Yacc library's @code{main} function is:
+
+@example
+int main (void)
+@{
+ setlocale (LC_ALL, "");
+ return yyparse ();
+@}
+@end example
+
+@noindent
+so if you use it, the internationalization support is enabled (e.g., error
+messages are translated), and your @code{yyparse} function should have the
+following type signature:
@example
int yyparse (void);
@table @file
@item position.hh
@itemx location.hh
-The definition of the classes @code{position} and @code{location},
-used for location tracking when enabled. @xref{C++ Location Values}.
+The definition of the classes @code{position} and @code{location}, used for
+location tracking when enabled. These files are not generated if the
+@code{%define} variable @code{api.location.type} is defined. @xref{C++
+Location Values}.
@item stack.hh
An auxiliary class @code{stack} used by the parser.
@subsubsection C++ Unions
The @code{%union} directive works as for C, see @ref{Union Decl, ,The
-Collection of Value Types}. In particular it produces a genuine
+Union Declaration}. In particular it produces a genuine
@code{union}, which have a few specific features in C++.
@itemize @minus
@item
@node C++ Variants
@subsubsection C++ Variants
-Starting with version 2.6, Bison provides a @emph{variant} based
-implementation of semantic values for C++. This alleviates all the
-limitations reported in the previous section, and in particular, object
-types can be used without pointers.
+Bison provides a @emph{variant} based implementation of semantic values for
+C++. This alleviates all the limitations reported in the previous section,
+and in particular, object types can be used without pointers.
To enable variant-based semantic values, set @code{%define} variable
@code{variant} (@pxref{%define Summary,, variant}). Once this defined,
type on all platforms, alignments are enforced for @code{double} whatever
types are actually used. This may waste space in some cases.
-@item
-Our implementation is not conforming with strict aliasing rules. Alias
-analysis is a technique used in optimizing compilers to detect when two
-pointers are disjoint (they cannot ``meet''). Our implementation breaks
-some of the rules that G++ 4.4 uses in its alias analysis, so @emph{strict
-alias analysis must be disabled}. Use the option
-@option{-fno-strict-aliasing} to compile the generated parser.
-
@item
There might be portability issues we are not aware of.
@end itemize
@c - %define filename_type "const symbol::Symbol"
When the directive @code{%locations} is used, the C++ parser supports
-location tracking, see @ref{Tracking Locations}. Two auxiliary classes
-define a @code{position}, a single point in a file, and a @code{location}, a
-range composed of a pair of @code{position}s (possibly spanning several
-files).
+location tracking, see @ref{Tracking Locations}.
+
+By default, two auxiliary classes define a @code{position}, a single point
+in a file, and a @code{location}, a range composed of a pair of
+@code{position}s (possibly spanning several files). But if the
+@code{%define} variable @code{api.location.type} is defined, then these
+classes will not be generated, and the user defined type will be used.
@tindex uint
In this section @code{uint} is an abbreviation for @code{unsigned int}: in
@menu
* C++ position:: One point in the source file
* C++ location:: Two points in the source file
+* User Defined Location Type:: Required interface for locations
@end menu
@node C++ position
The line, starting at 1.
@end deftypeivar
-@deftypemethod {position} {uint} lines (int @var{height} = 1)
-Advance by @var{height} lines, resetting the column number.
+@deftypemethod {position} {void} lines (int @var{height} = 1)
+If @var{height} is not null, advance by @var{height} lines, resetting the
+column number. The resulting line number cannot be less than 1.
@end deftypemethod
@deftypeivar {position} {uint} column
The column, starting at 1.
@end deftypeivar
-@deftypemethod {position} {uint} columns (int @var{width} = 1)
-Advance by @var{width} columns, without changing the line number.
+@deftypemethod {position} {void} columns (int @var{width} = 1)
+Advance by @var{width} columns, without changing the line number. The
+resulting column number cannot be less than 1.
@end deftypemethod
@deftypemethod {position} {position&} operator+= (int @var{width})
The first, inclusive, position of the range, and the first beyond.
@end deftypeivar
-@deftypemethod {location} {uint} columns (int @var{width} = 1)
-@deftypemethodx {location} {uint} lines (int @var{height} = 1)
-Advance the @code{end} position.
+@deftypemethod {location} {void} columns (int @var{width} = 1)
+@deftypemethodx {location} {void} lines (int @var{height} = 1)
+Forwarded to the @code{end} position.
@end deftypemethod
-@deftypemethod {location} {location} operator+ (const location& @var{end})
-@deftypemethodx {location} {location} operator+ (int @var{width})
+@deftypemethod {location} {location} operator+ (int @var{width})
@deftypemethodx {location} {location} operator+= (int @var{width})
-Various forms of syntactic sugar.
+@deftypemethodx {location} {location} operator- (int @var{width})
+@deftypemethodx {location} {location} operator-= (int @var{width})
+Various forms of syntactic sugar for @code{columns}.
+@end deftypemethod
+
+@deftypemethod {location} {location} operator+ (const location& @var{end})
+@deftypemethodx {location} {location} operator+= (const location& @var{end})
+Join two locations: starts at the position of the first one, and ends at the
+position of the second.
@end deftypemethod
@deftypemethod {location} {void} step ()
@code{filename} defined, or equal filename/line or column.
@end deftypefun
+@node User Defined Location Type
+@subsubsection User Defined Location Type
+@findex %define api.location.type
+
+Instead of using the built-in types you may use the @code{%define} variable
+@code{api.location.type} to specify your own type:
+
+@example
+%define api.location.type @{@var{LocationType}@}
+@end example
+
+The requirements over your @var{LocationType} are:
+@itemize
+@item
+it must be copyable;
+
+@item
+in order to compute the (default) value of @code{@@$} in a reduction, the
+parser basically runs
+@example
+@@$.begin = @@1.begin;
+@@$.end = @@@var{N}.end; // The location of last right-hand side symbol.
+@end example
+@noindent
+so there must be copyable @code{begin} and @code{end} members;
+
+@item
+alternatively you may redefine the computation of the default location, in
+which case these members are not required (@pxref{Location Default Action});
+
+@item
+if traces are enabled, then there must exist an @samp{std::ostream&
+ operator<< (std::ostream& o, const @var{LocationType}& s)} function.
+@end itemize
+
+@sp 1
+
+In programs with several C++ parsers, you may also use the @code{%define}
+variable @code{api.location.type} to share a common set of built-in
+definitions for @code{position} and @code{location}. For instance, one
+parser @file{master/parser.yy} might use:
+
+@example
+%defines
+%locations
+%define api.namespace @{master::@}
+@end example
+
+@noindent
+to generate the @file{master/position.hh} and @file{master/location.hh}
+files, reused by other parsers as follows:
+
+@example
+%define api.location.type @{master::location@}
+%code requires @{ #include <master/location.hh> @}
+@end example
+
@node C++ Parser Interface
@subsection C++ Parser Interface
@c - define parser_class_name
The output files @file{@var{output}.hh} and @file{@var{output}.cc}
declare and define the parser class in the namespace @code{yy}. The
class name defaults to @code{parser}, but may be changed using
-@samp{%define parser_class_name "@var{name}"}. The interface of
+@samp{%define parser_class_name @{@var{name}@}}. The interface of
this class is detailed below. It can be extended using the
@code{%parse-param} feature: its semantics is slightly changed since
it describes an additional member of the parser class, and an
@deftypemethod {parser} {int} parse ()
Run the syntactic analysis, and return 0 on success, 1 otherwise.
+
+@cindex exceptions
+The whole function is wrapped in a @code{try}/@code{catch} block, so that
+when an exception is thrown, the @code{%destructor}s are called to release
+the lookahead symbol, and the symbols pushed on the stack.
@end deftypemethod
@deftypemethod {parser} {std::ostream&} debug_stream ()
@node Split Symbols
@subsubsection Split Symbols
-Therefore the interface is as follows.
+The interface is as follows.
@deftypemethod {parser} {int} yylex (semantic_type* @var{yylval}, location_type* @var{yylloc}, @var{type1} @var{arg1}, ...)
@deftypemethodx {parser} {int} yylex (semantic_type* @var{yylval}, @var{type1} @var{arg1}, ...)
@example
[0-9]+ @{
- yylval.ival = text_to_int (yytext);
- return yy::parser::INTEGER;
+ yylval->ival = text_to_int (yytext);
+ return yy::parser::token::INTEGER;
@}
[a-z]+ @{
- yylval.sval = new std::string (yytext);
- return yy::parser::IDENTIFIER;
+ yylval->sval = new std::string (yytext);
+ return yy::parser::token::IDENTIFIER;
@}
@end example
@example
[0-9]+ @{
- yylval.build<int>() = text_to_int (yytext);
- return yy::parser::INTEGER;
+ yylval->build<int> () = text_to_int (yytext);
+ return yy::parser::token::INTEGER;
@}
[a-z]+ @{
- yylval.build<std::string> = yytext;
- return yy::parser::IDENTIFIER;
+ yylval->build<std::string> () = yytext;
+ return yy::parser::token::IDENTIFIER;
@}
@end example
@example
[0-9]+ @{
- yylval.build(text_to_int (yytext));
- return yy::parser::INTEGER;
+ yylval->build (text_to_int (yytext));
+ return yy::parser::token::INTEGER;
@}
[a-z]+ @{
- yylval.build(yytext);
- return yy::parser::IDENTIFIER;
+ yylval->build (yytext);
+ return yy::parser::token::IDENTIFIER;
@}
@end example
@node Complete Symbols
@subsubsection Complete Symbols
-If you specified both @code{%define variant} and @code{%define lex_symbol},
+If you specified both @code{%define api.value.type variant} and
+@code{%define api.token.constructor},
the @code{parser} class also defines the class @code{parser::symbol_type}
which defines a @emph{complete} symbol, aggregating its type (i.e., the
traditional value returned by @code{yylex}), its semantic value (i.e., the
So for each token type, Bison generates named constructors as follows.
-@deftypemethod {symbol_type} {} make_@var{token} (const @var{value_type}& @var{value}, const location_type& @var{location})
-@deftypemethodx {symbol_type} {} make_@var{token} (const location_type& @var{location})
+@deftypemethod {symbol_type} {} {make_@var{token}} (const @var{value_type}& @var{value}, const location_type& @var{location})
+@deftypemethodx {symbol_type} {} {make_@var{token}} (const location_type& @var{location})
Build a complete terminal symbol for the token type @var{token} (not
-including the @code{api.tokens.prefix}) whose possible semantic value is
+including the @code{api.token.prefix}) whose possible semantic value is
@var{value} of adequate @var{value_type}. If location tracking is enabled,
also pass the @var{location}.
@end deftypemethod
For instance, given the following declarations:
@example
-%define api.tokens.prefix "TOK_"
+%define api.token.prefix @{TOK_@}
%token <std::string> IDENTIFIER;
%token <int> INTEGER;
%token COLON;
Bison generates the following functions:
@example
-symbol_type make_IDENTIFIER(const std::string& v,
- const location_type& l);
-symbol_type make_INTEGER(const int& v,
- const location_type& loc);
-symbol_type make_COLON(const location_type& loc);
+symbol_type make_IDENTIFIER (const std::string&, const location_type&);
+symbol_type make_INTEGER (const int&, const location_type&);
+symbol_type make_COLON (const location_type&);
@end example
@noindent
which should be used in a Lex-scanner as follows.
@example
-[0-9]+ return yy::parser::make_INTEGER(text_to_int (yytext), loc);
-[a-z]+ return yy::parser::make_IDENTIFIER(yytext, loc);
-":" return yy::parser::make_COLON(loc);
+[0-9]+ return yy::parser::make_INTEGER (text_to_int (yytext), loc);
+[a-z]+ return yy::parser::make_IDENTIFIER (yytext, loc);
+":" return yy::parser::make_COLON (loc);
@end example
Tokens that do not have an identifier are not accessible: you cannot simply
%skeleton "lalr1.cc" /* -*- C++ -*- */
%require "@value{VERSION}"
%defines
-%define parser_class_name "calcxx_parser"
+%define parser_class_name @{calcxx_parser@}
@end example
@noindent
-@findex %define variant
-@findex %define lex_symbol
+@findex %define api.token.constructor
+@findex %define api.value.type variant
This example will use genuine C++ objects as semantic values, therefore, we
require the variant-based interface. To make sure we properly use it, we
enable assertions. To fully benefit from type-safety and more natural
-definition of ``symbol'', we enable @code{lex_symbol}.
+definition of ``symbol'', we enable @code{api.token.constructor}.
@comment file: calc++-parser.yy
@example
-%define variant
+%define api.token.constructor
+%define api.value.type variant
%define parse.assert
-%define lex_symbol
@end example
@noindent
allows for nicer error messages referring to ``end of file'' instead of
``$end''. Similarly user friendly names are provided for each symbol. To
avoid name clashes in the generated files (@pxref{Calc++ Scanner}), prefix
-tokens with @code{TOK_} (@pxref{%define Summary,,api.tokens.prefix}).
+tokens with @code{TOK_} (@pxref{%define Summary,,api.token.prefix}).
@comment file: calc++-parser.yy
@example
-%define api.tokens.prefix "TOK_"
+%define api.token.prefix @{TOK_@}
%token
END 0 "end of file"
ASSIGN ":="
No @code{%destructor} is needed to enable memory deallocation during error
recovery; the memory, for strings for instance, will be reclaimed by the
regular destructors. All the values are printed using their
-@code{operator<<}.
+@code{operator<<} (@pxref{Printer Decl, , Printing Semantic Values}).
-@c FIXME: Document %printer, and mention that it takes a braced-code operand.
@comment file: calc++-parser.yy
@example
%printer @{ yyoutput << $$; @} <*>;
@noindent
The grammar itself is straightforward (@pxref{Location Tracking Calc, ,
-Location Tracking Calculator: @code{ltcalc}}).
+Location Tracking Calculator - @code{ltcalc}}).
@comment file: calc++-parser.yy
@example
unit: assignments exp @{ driver.result = $2; @};
assignments:
- /* Nothing. */ @{@}
+ %empty @{@}
| assignments assignment @{@};
assignment:
@comment file: calc++-scanner.ll
@example
-%option noyywrap nounput batch debug
+%option noyywrap nounput batch debug noinput
@end example
@noindent
@comment file: calc++-scanner.ll
@example
-"-" return yy::calcxx_parser::make_MINUS(loc);
-"+" return yy::calcxx_parser::make_PLUS(loc);
-"*" return yy::calcxx_parser::make_STAR(loc);
-"/" return yy::calcxx_parser::make_SLASH(loc);
-"(" return yy::calcxx_parser::make_LPAREN(loc);
-")" return yy::calcxx_parser::make_RPAREN(loc);
-":=" return yy::calcxx_parser::make_ASSIGN(loc);
+"-" return yy::calcxx_parser::make_MINUS (loc);
+"+" return yy::calcxx_parser::make_PLUS (loc);
+"*" return yy::calcxx_parser::make_STAR (loc);
+"/" return yy::calcxx_parser::make_SLASH (loc);
+"(" return yy::calcxx_parser::make_LPAREN (loc);
+")" return yy::calcxx_parser::make_RPAREN (loc);
+":=" return yy::calcxx_parser::make_ASSIGN (loc);
@group
@{int@} @{
long n = strtol (yytext, NULL, 10);
if (! (INT_MIN <= n && n <= INT_MAX && errno != ERANGE))
driver.error (loc, "integer is out of range");
- return yy::calcxx_parser::make_NUMBER(n, loc);
+ return yy::calcxx_parser::make_NUMBER (n, loc);
@}
@end group
-@{id@} return yy::calcxx_parser::make_IDENTIFIER(yytext, loc);
+@{id@} return yy::calcxx_parser::make_IDENTIFIER (yytext, loc);
. driver.error (loc, "invalid character");
-<<EOF>> return yy::calcxx_parser::make_END(loc);
+<<EOF>> return yy::calcxx_parser::make_END (loc);
%%
@end example
* Java Parser Interface:: Instantiating and running the parser
* Java Scanner Interface:: Specifying the scanner for the parser
* Java Action Features:: Special features for use in actions
+* Java Push Parser Interface:: Instantiating and running the a push parser
* Java Differences:: Differences between C/C++ and Java Grammars
* Java Declarations Summary:: List of Bison declarations used with Java
@end menu
Contrary to C parsers, Java parsers do not use global variables; the
state of the parser is always local to an instance of the parser class.
Therefore, all Java parsers are ``pure'', and the @code{%pure-parser}
-and @samp{%define api.pure} directives does not do anything when used in
-Java.
+and @code{%define api.pure} directives do nothing when used in Java.
Push parsers are currently unsupported in Java and @code{%define
api.push-pull} have no effect.
By default, the semantic stack is declared to have @code{Object} members,
which means that the class types you specify can be of any class.
To improve the type safety of the parser, you can declare the common
-superclass of all the semantic values using the @samp{%define stype}
+superclass of all the semantic values using the @samp{%define api.value.type}
directive. For example, after the following declaration:
@example
-%define stype "ASTNode"
+%define api.value.type @{ASTNode@}
@end example
@noindent
defines a class representing a @dfn{location}, a range composed of a pair of
positions (possibly spanning several files). The location class is an inner
class of the parser; the name is @code{Location} by default, and may also be
-renamed using @samp{%define location_type "@var{class-name}"}.
+renamed using @code{%define api.location.type @{@var{class-name}@}}.
The location class treats the position as a completely opaque value.
By default, the class name is @code{Position}, but this can be changed
-with @samp{%define position_type "@var{class-name}"}. This class must
+with @code{%define api.position.type @{@var{class-name}@}}. This class must
be supplied by the user.
The name of the generated parser class defaults to @code{YYParser}. The
@code{YY} prefix may be changed using the @code{%name-prefix} directive
or the @option{-p}/@option{--name-prefix} option. Alternatively, use
-@samp{%define parser_class_name "@var{name}"} to give a custom name to
+@samp{%define parser_class_name @{@var{name}@}} to give a custom name to
the class. The interface of this class is detailed below.
By default, the parser class has package visibility. A declaration
file should match the name of the class in this case. Similarly, you can
use @code{abstract}, @code{final} and @code{strictfp} with the
@code{%define} declaration to add other modifiers to the parser class.
-A single @samp{%define annotations "@var{annotations}"} directive can
+A single @samp{%define annotations @{@var{annotations}@}} directive can
be used to add any number of annotations to the parser class.
The Java package name of the parser class can be specified using the
@deftypemethod {Lexer} {void} yyerror (Location @var{loc}, String @var{msg})
This method is defined by the user to emit an error message. The first
parameter is omitted if location tracking is not active. Its type can be
-changed using @samp{%define location_type "@var{class-name}".}
+changed using @code{%define api.location.type @{@var{class-name}@}}.
@end deftypemethod
@deftypemethod {Lexer} {int} yylex ()
@code{yylex} returned, and the first position beyond it. These
methods are not needed unless location tracking is active.
-The return type can be changed using @samp{%define position_type
-"@var{class-name}".}
+The return type can be changed using @code{%define api.position.type
+@{@var{class-name}@}}.
@end deftypemethod
@deftypemethod {Lexer} {Object} getLVal ()
Return the semantic value of the last token that yylex returned.
-The return type can be changed using @samp{%define stype
-"@var{class-name}".}
+The return type can be changed using @samp{%define api.value.type
+@{@var{class-name}@}}.
@end deftypemethod
-
@node Java Action Features
@subsection Special Features for Use in Java Actions
@defvar $$
The semantic value for the grouping made by the current rule. As a
value, this is in the base type (@code{Object} or as specified by
-@samp{%define stype}) as in not cast to the declared subtype because
+@samp{%define api.value.type}) as in not cast to the declared subtype because
casts are not allowed on the left-hand side of Java assignments.
Use an explicit Java cast if the correct subtype is needed.
@xref{Java Semantic Values}.
available only if location tracking is active.
@end deftypefn
+@node Java Push Parser Interface
+@subsection Java Push Parser Interface
+@c - define push_parse
+@findex %define api.push-pull
+
+(The current push parsing interface is experimental and may evolve. More
+user feedback will help to stabilize it.)
+
+Normally, Bison generates a pull parser for Java.
+The following Bison declaration says that you want the parser to be a push
+parser (@pxref{%define Summary,,api.push-pull}):
+
+@example
+%define api.push-pull push
+@end example
+
+Most of the discussion about the Java pull Parser Interface, (@pxref{Java
+Parser Interface}) applies to the push parser interface as well.
+
+When generating a push parser, the method @code{push_parse} is created with
+the following signature (depending on if locations are enabled).
+
+@deftypemethod {YYParser} {void} push_parse ({int} @var{token}, {Object} @var{yylval})
+@deftypemethodx {YYParser} {void} push_parse ({int} @var{token}, {Object} @var{yylval}, {Location} @var{yyloc})
+@deftypemethodx {YYParser} {void} push_parse ({int} @var{token}, {Object} @var{yylval}, {Position} @var{yypos})
+@end deftypemethod
+
+The primary difference with respect to a pull parser is that the parser
+method @code{push_parse} is invoked repeatedly to parse each token. This
+function is available if either the "%define api.push-pull push" or "%define
+api.push-pull both" declaration is used (@pxref{%define
+Summary,,api.push-pull}). The @code{Location} and @code{Position}
+parameters are available only if location tracking is active.
+
+The value returned by the @code{push_parse} method is one of the following
+four constants: @code{YYABORT}, @code{YYACCEPT}, @code{YYERROR}, or
+@code{YYPUSH_MORE}. This new value, @code{YYPUSH_MORE}, may be returned if
+more input is required to finish parsing the grammar.
+
+If api.push-pull is declared as @code{both}, then the generated parser class
+will also implement the @code{parse} method. This method's body is a loop
+that repeatedly invokes the scanner and then passes the values obtained from
+the scanner to the @code{push_parse} method.
+
+There is one additional complication. Technically, the push parser does not
+need to know about the scanner (i.e. an object implementing the
+@code{YYParser.Lexer} interface), but it does need access to the
+@code{yyerror} method. Currently, the @code{yyerror} method is defined in
+the @code{YYParser.Lexer} interface. Hence, an implementation of that
+interface is still required in order to provide an implementation of
+@code{yyerror}. The current approach (and subject to change) is to require
+the @code{YYParser} constructor to be given an object implementing the
+@code{YYParser.Lexer} interface. This object need only implement the
+@code{yyerror} method; the other methods can be stubbed since they will
+never be invoked. The simplest way to do this is to add a trivial scanner
+implementation to your grammar file using whatever implementation of
+@code{yyerror} is desired. The following code sample shows a simple way to
+accomplish this.
+
+@example
+%code lexer
+@{
+ public Object getLVal () @{return null;@}
+ public int yylex () @{return 0;@}
+ public void yyerror (String s) @{System.err.println(s);@}
+@}
+@end example
@node Java Differences
@subsection Differences between C/C++ and Java Grammars
@item
Java lacks unions, so @code{%union} has no effect. Instead, semantic
values have a common base type: @code{Object} or as specified by
-@samp{%define stype}. Angle brackets on @code{%token}, @code{type},
+@samp{%define api.value.type}. Angle brackets on @code{%token}, @code{type},
@code{$@var{n}} and @code{$$} specify subtypes rather than fields of
an union. The type of @code{$$}, even with angle brackets, is the base
type since Java casts are not allow on the left-hand side of assignments.
@xref{Java Bison Interface}.
@end deffn
-@deffn {Directive} {%define annotations} "@var{annotations}"
+@deffn {Directive} {%define annotations} @{@var{annotations}@}
The Java annotations for the parser class. Default is none.
@xref{Java Bison Interface}.
@end deffn
-@deffn {Directive} {%define extends} "@var{superclass}"
+@deffn {Directive} {%define extends} @{@var{superclass}@}
The superclass of the parser class. Default is none.
@xref{Java Bison Interface}.
@end deffn
@xref{Java Bison Interface}.
@end deffn
-@deffn {Directive} {%define implements} "@var{interfaces}"
+@deffn {Directive} {%define implements} @{@var{interfaces}@}
The implemented interfaces of the parser class, a comma-separated list.
Default is none.
@xref{Java Bison Interface}.
@end deffn
-@deffn {Directive} {%define init_throws} "@var{exceptions}"
+@deffn {Directive} {%define init_throws} @{@var{exceptions}@}
The exceptions thrown by @code{%code init} from the parser class
constructor. Default is none.
@xref{Java Parser Interface}.
@end deffn
-@deffn {Directive} {%define lex_throws} "@var{exceptions}"
+@deffn {Directive} {%define lex_throws} @{@var{exceptions}@}
The exceptions thrown by the @code{yylex} method of the lexer, a
comma-separated list. Default is @code{java.io.IOException}.
@xref{Java Scanner Interface}.
@end deffn
-@deffn {Directive} {%define location_type} "@var{class}"
+@deffn {Directive} {%define api.location.type} @{@var{class}@}
The name of the class used for locations (a range between two
positions). This class is generated as an inner class of the parser
class by @command{bison}. Default is @code{Location}.
+Formerly named @code{location_type}.
@xref{Java Location Values}.
@end deffn
-@deffn {Directive} {%define package} "@var{package}"
+@deffn {Directive} {%define package} @{@var{package}@}
The package to put the parser class in. Default is none.
@xref{Java Bison Interface}.
@end deffn
-@deffn {Directive} {%define parser_class_name} "@var{name}"
+@deffn {Directive} {%define parser_class_name} @{@var{name}@}
The name of the parser class. Default is @code{YYParser} or
@code{@var{name-prefix}Parser}.
@xref{Java Bison Interface}.
@end deffn
-@deffn {Directive} {%define position_type} "@var{class}"
+@deffn {Directive} {%define api.position.type} @{@var{class}@}
The name of the class used for positions. This class must be supplied by
the user. Default is @code{Position}.
+Formerly named @code{position_type}.
@xref{Java Location Values}.
@end deffn
@xref{Java Bison Interface}.
@end deffn
-@deffn {Directive} {%define stype} "@var{class}"
+@deffn {Directive} {%define api.value.type} @{@var{class}@}
The base type of semantic values. Default is @code{Object}.
@xref{Java Semantic Values}.
@end deffn
@xref{Java Bison Interface}.
@end deffn
-@deffn {Directive} {%define throws} "@var{exceptions}"
+@deffn {Directive} {%define throws} @{@var{exceptions}@}
The exceptions thrown by user-supplied parser actions and
@code{%initial-action}, a comma-separated list. Default is none.
@xref{Java Parser Interface}.
@quotation
My parser includes support for an @samp{#include}-like feature, in
which case I run @code{yyparse} from @code{yyparse}. This fails
-although I did specify @samp{%define api.pure}.
+although I did specify @samp{%define api.pure full}.
@end quotation
These problems typically come not from Bison itself, but from
version. If you have trouble compiling, you should also include a
transcript of the build session, starting with the invocation of
`configure'. Depending on the nature of the bug, you may be asked to
-send additional files as well (such as `config.h' or `config.cache').
+send additional files as well (such as @file{config.h} or @file{config.cache}).
Patches are most welcome, but not required. That is, do not hesitate to
send a bug report just because you cannot provide a fix.
@end deffn
@deffn {Variable} @@@var{n}
+@deffnx {Symbol} @@@var{n}
In an action, the location of the @var{n}-th symbol of the right-hand side
of the rule. @xref{Tracking Locations}.
+
+In a grammar, the Bison-generated nonterminal symbol for a mid-rule action
+with a semantical value. @xref{Mid-Rule Action Translation}.
@end deffn
@deffn {Variable} @@@var{name}
-In an action, the location of a symbol addressed by name. @xref{Tracking
-Locations}.
+@deffnx {Variable} @@[@var{name}]
+In an action, the location of a symbol addressed by @var{name}.
+@xref{Tracking Locations}.
@end deffn
-@deffn {Variable} @@[@var{name}]
-In an action, the location of a symbol addressed by name. @xref{Tracking
-Locations}.
+@deffn {Symbol} $@@@var{n}
+In a grammar, the Bison-generated nonterminal symbol for a mid-rule action
+with no semantical value. @xref{Mid-Rule Action Translation}.
@end deffn
@deffn {Variable} $$
@end deffn
@deffn {Variable} $@var{name}
-In an action, the semantic value of a symbol addressed by name.
-@xref{Actions}.
-@end deffn
-
-@deffn {Variable} $[@var{name}]
-In an action, the semantic value of a symbol addressed by name.
+@deffnx {Variable} $[@var{name}]
+In an action, the semantic value of a symbol addressed by @var{name}.
@xref{Actions}.
@end deffn
feature.
@end deffn
-@deffn {Construct} /*@dots{}*/
-Comment delimiters, as in C.
+@deffn {Construct} /* @dots{} */
+@deffnx {Construct} // @dots{}
+Comments, as in C/C++.
@end deffn
@deffn {Delimiter} :
@deffn {Directive} %define @var{variable}
@deffnx {Directive} %define @var{variable} @var{value}
+@deffnx {Directive} %define @var{variable} @{@var{value}@}
@deffnx {Directive} %define @var{variable} "@var{value}"
Define a variable to adjust Bison's behavior. @xref{%define Summary}.
@end deffn
GLR Parsers}.
@end deffn
+@deffn {Directive} %empty
+Bison declaration to declare make explicit that a rule has an empty
+right-hand side. @xref{Empty Rules}.
+@end deffn
+
@deffn {Symbol} $end
The predefined token marking the end of the token stream. It cannot be
used in the grammar.
@code{yypstate_new} and @code{yypstate_delete} will also be renamed. For
example, if you use @samp{%name-prefix "c_"}, the names become
@code{c_parse}, @code{c_lex}, and so on. For C++ parsers, see the
-@code{%define namespace} documentation in this section.
+@code{%define api.namespace} documentation in this section.
@end deffn
@deffn {Directive} %union
Bison declaration to specify several possible data types for semantic
-values. @xref{Union Decl, ,The Collection of Value Types}.
+values. @xref{Union Decl, ,The Union Declaration}.
@end deffn
@deffn {Macro} YYABORT
@code{yylex}}.
@end deffn
-@deffn {Macro} YYLEX_PARAM
-An obsolete macro for specifying an extra argument (or list of extra
-arguments) for @code{yyparse} to pass to @code{yylex}. The use of this
-macro is deprecated, and is supported only for Yacc like parsers.
-@xref{Pure Calling,, Calling Conventions for Pure Parsers}.
-@end deffn
-
@deffn {Variable} yylloc
External variable in which @code{yylex} should place the line and column
numbers associated with a token. (In a pure parser, it is a local
@deffn {Variable} yynerrs
Global variable which Bison increments each time it reports a syntax error.
(In a pure parser, it is a local variable within @code{yyparse}. In a
-pure push parser, it is a member of yypstate.)
+pure push parser, it is a member of @code{yypstate}.)
@xref{Error Reporting, ,The Error Reporting Function @code{yyerror}}.
@end deffn
More user feedback will help to stabilize it.)
@end deffn
-@deffn {Macro} YYPARSE_PARAM
-An obsolete macro for specifying the name of a parameter that
-@code{yyparse} should accept. The use of this macro is deprecated, and
-is supported only for Yacc like parsers. @xref{Pure Calling,, Calling
-Conventions for Pure Parsers}.
-@end deffn
-
@deffn {Macro} YYRECOVERING
The expression @code{YYRECOVERING ()} yields 1 when the parser
is recovering from a syntax error, and 0 otherwise.
@end deffn
@deffn {Type} YYSTYPE
+Deprecated in favor of the @code{%define} variable @code{api.value.type}.
Data type of semantic values; @code{int} by default.
@xref{Value Type, ,Data Types of Semantic Values}.
@end deffn
@item Accepting state
A state whose only action is the accept action.
The accepting state is thus a consistent state.
-@xref{Understanding,,}.
+@xref{Understanding, ,Understanding Your Parser}.
@item Backus-Naur Form (BNF; also called ``Backus Normal Form'')
Formal method of specifying context-free grammars originally proposed
@uref{http://www.cs.rhul.ac.uk/research/languages/publications/tomita_style_1.ps}
@end table
-@node Index
-@unnumbered Index
+@node Index of Terms
+@unnumbered Index of Terms
@printindex cp
@c LocalWords: toString deftypeivar deftypeivarx deftypeop YYParser strictfp
@c LocalWords: superclasses boolean getErrorVerbose setErrorVerbose deftypecv
@c LocalWords: getDebugStream setDebugStream getDebugLevel setDebugLevel url
-@c LocalWords: bisonVersion deftypecvx bisonSkeleton getStartPos getEndPos
+@c LocalWords: bisonVersion deftypecvx bisonSkeleton getStartPos getEndPos uint
@c LocalWords: getLVal defvar deftypefn deftypefnx gotos msgfmt Corbett LALR's
-@c LocalWords: subdirectory Solaris nonassociativity perror schemas Malloy
-@c LocalWords: Scannerless ispell american
+@c LocalWords: subdirectory Solaris nonassociativity perror schemas Malloy ints
+@c LocalWords: Scannerless ispell american ChangeLog smallexample CSTYPE CLTYPE
+@c LocalWords: clval CDEBUG cdebug deftypeopx yyterminate LocationType
+@c LocalWords: parsers parser's
+@c LocalWords: associativity subclasses precedences unresolvable runnable
+@c LocalWords: allocators subunit initializations unreferenced untyped
+@c LocalWords: errorVerbose subtype subtypes
@c Local Variables:
@c ispell-dictionary: "american"
projects / bison.git / blobdiff