+# DJGPP specific configuration file.
+# Sed script for additional DJGPP specific editing
+# of the configure script generated by autoconf 2.61.
+
+
+# Copyright (C) 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+
# Additional editing of Makefiles
-/(echo[ ]*':t/ a\
+/^".*ac_file_inputs.*tmp\/out$/ a\
+cat > "$tmp/subs-djgpp.sed" << eof_djgpp\
# DJGPP specific Makefile changes.\
- /^aliaspath * *=/s,:,";",g;t t\
- /TEXINPUTS=/s,:,";",g;t t\
- /PATH=/s,:,";",g;t t\
- s,\\.deps,_deps,g;t t\
- s,\\.new\\.,_new.,g;t t\
- s,\\.old\\.,_old.,g;t t\
- s,c++\\.at,cxx.at,g;t t\
- s,c++\\.m4,cxx.m4,g;t t\
- s,calc++,calcxx,g;t t\
- s,Makefile\\.in\\.in,Makefile.in-in,g;t t\
- s,Makefile\\.am\\.in,Makefile.am-in,g;t t\
- s,(MAKEINFOFLAGS),& --no-split,\
- /^install-info-am:/,/^$/ {\
- /@list=/ s,\\\$(INFO_DEPS),& bison.i,\
- /@for *file/ s,\\\$(INFO_DEPS),& bison.i,\
- s,file-\\[0-9\\]\\[0-9\\],& \\$\\$file[0-9] \\$\\$file[0-9][0-9],\
- }\
- /^\\.y\\.c:/,/^$/ {\
- /\\\$(YACCCOMPILE)/ {\
- a\\\
- -@test -f y.tab.c && mv -f y.tab.c y_tab.c\\\
+s,\\.deps,_deps,g\
+s,\\.libs,_libs,g\
+s,\\.new\\.,_new.,g\
+s,\\.old\\.,_old.,g\
+s,\\.tab\\.,_tab.,g\
+s,c++\\.at,cxx.at,g\
+s,c++\\.m4,cxx.m4,g\
+s,c++-skel\\.m4,cxx-skel.m4,g\
+s,calc++,calcxx,g\
+s,scan-gram-c,c-scan-gram,g\
+s,scan-skel-c,c-scan-skel,g\
+s,inttypes_,_inttypes,g\
+s,javacomp\\.sh\\.in,javacomp.sh-in,g\
+s,javaexec\\.sh\\.in,javaexec.sh-in,g\
+s,yacc\\.1\\.in,yacc.1-in,g\
+s,bench\\.pl\\.in,bench.pl-in,g\
+s,Makefile\\.am\\.in,Makefile.am-in,g\
+s,Makefile\\.in\\.in,Makefile.in-in,g\
+/^\\.y\\.c:/,/^$/ {\
+ /\\\$(YACCCOMPILE)/ {\
+ a\\\\\
+ -@test -f y.tab.c && mv -f y.tab.c y_tab.c\\\\\
-@test -f y.tab.h && mv -f y.tab.h y_tab.h\
- }\
}\
-/^libbison.a:/ i\\\
-\\$(top_srcdir)/djgpp/subpipe.c: \\$(top_srcdir)/djgpp/subpipe.h\\\
-subpipe.o: \\$(top_srcdir)/djgpp/subpipe.c \\$(top_srcdir)/djgpp/subpipe.h\\\
+}\
+/^libbison.a:/ i\\\\\
+\\$(top_srcdir)/djgpp/subpipe.c: \\$(top_srcdir)/djgpp/subpipe.h\\\\\
+subpipe.o: \\$(top_srcdir)/djgpp/subpipe.c \\$(top_srcdir)/djgpp/subpipe.h\\\\\
\\$(COMPILE) -c \\$<\
-/^yacc:/ i\\\
-yacc.bat:\\\
+/^yacc:/ i\\\\\
+yacc.bat:\\\\\
echo "bison\\$(EXEEXT) -y %1 %2 %3 %4 %5 %6 %7 %8 %9" >\\$@\
/^bin_SCRIPTS =/s/$/ yacc.bat/\
-/^MOSTLYCLEANFILES = yacc/s/$/ yacc.bat/
+/^MOSTLYCLEANFILES = yacc/s/$/ yacc.bat/\
+/cross-options.texi:/,/^$/ s|bison|&.exe|g\
+/^\\.x\\.1:/,/^$/ s|\\$program|&.exe|g\
+eof_djgpp\
+sed -f "\$tmp/subs-djgpp.sed" \$tmp/out > \$tmp/out.djgpp\
+mv -f \$tmp/out.djgpp \$tmp/out
# Makefile.in.in is renamed to Makefile.in-in.
-/ac_config_files=/,/_ACEOF/ {
- s|po/Makefile\.in|&:po/Makefile.in-in|
+/ac_config_files=/ {
+ /runtime-po/!s|po/Makefile\.in|&:po/Makefile.in-in|
+ s|runtime-po/Makefile\.in|&:runtime-po/Makefile.in-in|
+ s|javacomp\.sh\.in|javacomp.sh-in|
+ s|javaexec\.sh\.in|javaexec.sh-in|
+ s|doc/yacc\.1|&:doc/yacc.1-in|
+ s|etc/bench.pl|&:etc/bench.pl-in|
+}
+
+/CONFIG_FILES=/ {
+ /runtime-po/!s|po/Makefile\.in|&:po/Makefile.in-in|2
+ s|runtime-po/Makefile\.in|&:runtime-po/Makefile.in-in|2
+ s|javacomp\.sh\.in|javacomp.sh-in|
+ s|javaexec\.sh\.in|javaexec.sh-in|
+ s|doc/yacc\.1|&:doc/yacc.1-in|2
+ s|etc/bench\.pl|&:etc/bench.pl-in|2
}
-/CONFIG_FILES=/ s|po/Makefile\.in|&:po/Makefile.in-in|2
# We always use _deps and _libs instead of .deps and .libs, because
-# the latter is an invalid name on 8+3 MS-DOS filesystem. This makes
+# the latter is an invalid name on 8+3 MS-DOS file system. This makes
# the generated Makefiles good for every DJGPP installation, not only
# the one where the package was configured (which could happen to be
# a Windows box, where leading dots in file names are allowed).
-s,\.deps,_deps,g
-s,\.libs,_libs,g
-/^rmdir[ ]*\.tst/ i\
+/^rmdir[ ]*\.tst/ i\
am__leading_dot=_
# Replace (command) > /dev/null with `command > /dev/null`, since
/if ([^|;`]*null/{
s,(,`,
s,),,
- /null[ ]*2>&1/ s,2>&1,&`,
+ /null[ ]*2>&1/ s,2>&1,&`,
/null.*null/ s,null.*null,&`,
/null.*null/ !{
- /null[ ]*2>&1/ !s,null,&`,
+ /null[ ]*2>&1/ !s,null,&`,
}
}
# DOS-style absolute file names should be supported as well
/\*) top_srcdir=/s,/\*,[\\\\/]* | ?:[\\\\/]*,
-# Prevent the spliting of subs.sed.
-# The sed script: subs.sed is split into 48 lines long files.
-# This will produce sed scripts called subs-$ac_sed_frag.sed, where
-# $ac_sed_frag is some unique number. This will not work if the splited
-# sed script contains a multiple line sed command at line #48. In this
-# case the first part of the multiple line sed command will be written
-# at the end of one particular subs-$ac_sed_frag.sed and the rest of the
-# sed command will be written at the begining of the next subs-$ac_sed_frag.sed
-# making both sed script useless.
-# This matches the configure script produced by Autoconf 2.57
-/ac_max_sed_lines=[0-9]/ s,=.*$,=`sed -n "$=" $tmp/subs.sed`,
-
# The following two items are changes needed for configuring
# and compiling across partitions.
# 1) The given srcdir value is always translated from the
# "x:" syntax into "/dev/x" syntax while we run configure.
-/^[ ]*-srcdir=\*.*$/ a\
+/^[ ]*-srcdir=\*.*$/ a\
ac_optarg=`echo "$ac_optarg" | sed "s,^\\([A-Za-z]\\):,/dev/\\1,"`
/set X `ls -Lt \$srcdir/ i\
if `echo $srcdir | grep "^/dev/" - > /dev/null`; then\
# which the package has not been configured for.
/MISSING=/,/^$/ {
/^fi$/ a\
-am_missing_run=`echo "$am_missing_run" | sed 's%/dev.*/bison-[0-9]\\{1,1\\}[-.0-9A-z]*%${top_srcdir}%;s%.:.*/bison-[0-9]\\{1,1\\}[-.0-9A-z]*%${top_srcdir}%'`
+am_missing_run=`echo "$am_missing_run" | sed 's%/dev/.*/bison[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%${top_srcdir}%;s%.:.*/bison[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%${top_srcdir}%'`
}
/^install_sh=/a\
-install_sh=`echo "$install_sh" | sed 's%/dev.*/bison-[0-9]\\{1,1\\}[-.0-9A-z]*%${top_srcdir}%;s%.:.*/bison-[0-9]\\{1,1\\}[-.0-9A-z]*%${top_srcdir}%'`
+install_sh=`echo "$install_sh" | sed 's%/dev/.*/bison[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%${top_srcdir}%;s%.:.*/bison[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%${top_srcdir}%'`
# This will only work if the assumption that the
# testsuite is ran from the following path:
# ${top_srcdir}/tests/testsuite.dir
# holds. The explicit names are of no importance.
# ../../. == ${top_srcdir}
-/\.)[ ]*ac_abs_builddir=/,/^esac$/ {
- /^esac$/ a\
-ac_abs_builddir=`echo "$ac_abs_builddir" | sed "s%/dev.*/bison-[0-9]\\{1,1\\}[-.0-9A-z]*/[^/]*%../../.%;s%.:.*/bison-[0-9]\\{1,1\\}[-.0-9A-z]*/[^/]*%../../.%"`
-}
-/\.)[ ]*ac_abs_top_builddir=/,/^esac$/ {
- /^esac$/ a\
-ac_abs_top_builddir=`echo "$ac_abs_top_builddir" | sed "s%/dev.*/bison-[0-9]\\{1,1\\}[-.0-9A-z]*/[^/]*%../../../%;s%.:.*/bison-[0-9]\\{1,1\\}[-.0-9A-z]*/[^/]*%../../../%"`
-}
-/\.)[ ]*ac_abs_srcdir=/,/^esac$/ {
- /^esac$/ a\
-ac_abs_srcdir=`echo "$ac_abs_srcdir" | sed "s%/dev.*/bison-[0-9]\\{1,1\\}[-.0-9A-z]*/[^/]*%../../.%;s%.:.*/bison-[0-9]\\{1,1\\}[-.0-9A-z]*/[^/]*%../../.%"`
-}
-/\.)[ ]*ac_abs_top_srcdir=/,/^esac$/ {
- /^esac$/ a\
-ac_abs_top_srcdir=`echo "$ac_abs_top_srcdir" | sed "s%/dev.*/bison-[0-9]\\{1,1\\}[-.0-9A-z]*/[^/]*%../../../%;s%.:.*/bison-[0-9]\\{1,1\\}[-.0-9A-z]*/[^/]*%../../../%"`
-}
-
+#/^esac$/,/^ac_abs_srcdir=/ {
+/^ac_abs_srcdir=/ i\
+ac_abs_builddir=`echo "$ac_abs_builddir" | sed "s%/dev/.*/bison[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%../../.%;s%.:.*/bison[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%../../.%"`\
+ac_abs_top_builddir=`echo "$ac_abs_top_builddir" | sed "s%/dev/.*/bison[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%../../..%;s%.:.*/bison[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%../../..%"`\
+ac_abs_top_srcdir=`echo "$ac_abs_top_srcdir" | sed "s%/dev/.*/bison[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%../../..%;s%.:.*/bison[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%../../..%"`
+#ac_abs_srcdir=`echo "$ac_abs_srcdir" | sed "s%/dev/.*/bison[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%../../.%;s%.:.*/bison[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%../../.%"`
+/^ac_abs_srcdir=/ a\
+for dj_dir in $ac_abs_builddir $ac_abs_top_builddir $ac_abs_top_srcdir $ac_abs_srcdir\
+do\
+ ac_abs_builddir=`echo "$ac_abs_builddir" | sed "s%//%/%g"`\
+ ac_abs_top_builddir=`echo "$ac_abs_top_builddir" | sed "s%//%/%g"`\
+ ac_abs_top_srcdir=`echo "$ac_abs_top_srcdir" | sed "s%//%/%g"`\
+ ac_abs_srcdir=`echo "$ac_abs_srcdir" | sed "s%//%/%g"`\
+done
+
# Add DJGPP version information.
/^#define VERSION/ s/\$VERSION/& (DJGPP port (r1))/
# We need makeinfo to make the html formated docs.
-/\$am_missing_run[ ]*makeinfo/ s,\$am_missing_run,,
+/\$am_missing_run[ ]*makeinfo/ s,\$am_missing_run,,
# The path to the FORTRAN compiler and libraries
# shall contain no absolute path reference so it
ac_djgpp_path=`echo "$DJDIR" | sed 's%\\\\\\%/%g' | tr $as_cr_LETTERS $as_cr_letters`\
ac_cv_flibs=`echo "$ac_cv_flibs" | sed "s%-L$ac_djgpp_path%-L/dev/env/DJDIR%g"`
+# Autoconf generated configure scripts write absolute
+# paths of certain header files into Makefiles making
+# them useless for DJGPP installations for which the
+# package has not been configured for.
+/^.*echo "\$as_me:\$LINENO: result: \$gl_cv_absolute_.*$/ {
+h
+s,^.*\(gl_cv_absolute_\)\([a-z0-9_]*\)\(_h\).*$,\1\2\3=`echo $\1\2\3 | sed "s%[^:]:.*/include/%/dev/env/DJDIR/include/%"`,
+G
+}
+/^.*echo "\$as_me:\$LINENO: result: \$gl_cv_full_.*$/ {
+h
+s,^.*\(gl_cv_full_\)\([a-z0-9_]*\)\(_h\).*$,\1\2\3=`echo $\1\2\3 | sed "s%[^:]:.*/include/%/dev/env/DJDIR/include/%"`,
+G
+}
+
# The following is not a valid DOS file name
-s/calc++/calcxx/g
\ No newline at end of file
+s/calc++/calcxx/g
projects / bison.git / blobdiff