-dnl aclocal.m4 generated automatically by aclocal 1.4-p4
+# aclocal.m4 generated automatically by aclocal 1.5
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
+# Copyright 1996, 1997, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
# Do all the work for Automake. This macro actually does too much --
# some checks are only needed if your package does certain things.
# But this isn't really a big deal.
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
- AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+# serial 5
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery. Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# We require 2.13 because we rely on SHELL being computed by configure.
+AC_PREREQ([2.13])
+
+# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
+# -----------------------------------------------------------
+# If MACRO-NAME is provided do IF-PROVIDED, else IF-NOT-PROVIDED.
+# The purpose of this macro is to provide the user with a means to
+# check macros which are provided without letting her know how the
+# information is coded.
+# If this macro is not defined by Autoconf, define it here.
+ifdef([AC_PROVIDE_IFELSE],
+ [],
+ [define([AC_PROVIDE_IFELSE],
+ [ifdef([AC_PROVIDE_$1],
+ [$2], [$3])])])
+
+
+# AM_INIT_AUTOMAKE(PACKAGE,VERSION, [NO-DEFINE])
+# ----------------------------------------------
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_REQUIRE([AC_PROG_INSTALL])dnl
+# test to see if srcdir already configured
+if test "`CDPATH=:; cd $srcdir && pwd`" != "`pwd`" &&
+ test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run \"make distclean\" there first])
fi
+
+# Define the identity of the package.
+PACKAGE=$1
+AC_SUBST(PACKAGE)dnl
+VERSION=$2
+AC_SUBST(VERSION)dnl
ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])
+
+# Autoconf 2.50 wants to disallow AM_ names. We explicitly allow
+# the ones we care about.
+ifdef([m4_pattern_allow],
+ [m4_pattern_allow([^AM_[A-Z]+FLAGS])])dnl
+
+# Autoconf 2.50 always computes EXEEXT. However we need to be
+# compatible with 2.13, for now. So we always define EXEEXT, but we
+# don't compute it.
+AC_SUBST(EXEEXT)
+# Similar for OBJEXT -- only we only use OBJEXT if the user actually
+# requests that it be used. This is a bit dumb.
+: ${OBJEXT=o}
+AC_SUBST(OBJEXT)
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG(ACLOCAL, aclocal)
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake)
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
+AM_MISSING_PROG(AMTAR, tar)
+AM_PROG_INSTALL_SH
+AM_PROG_INSTALL_STRIP
+# We need awk for the "check" target. The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_PROVIDE_IFELSE([AC_PROG_][CC],
+ [_AM_DEPENDENCIES(CC)],
+ [define([AC_PROG_][CC],
+ defn([AC_PROG_][CC])[_AM_DEPENDENCIES(CC)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_][CXX],
+ [_AM_DEPENDENCIES(CXX)],
+ [define([AC_PROG_][CXX],
+ defn([AC_PROG_][CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+])
#
# Check to make sure that the build environment is sane.
#
-AC_DEFUN(AM_SANITY_CHECK,
+# serial 3
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
[AC_MSG_CHECKING([whether build environment is sane])
# Just in case
sleep 1
-echo timestamp > conftestfile
+echo timestamp > conftest.file
# Do `set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
- set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
- if test "[$]*" = "X"; then
+ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+ if test "$[*]" = "X"; then
# -L didn't work.
- set X `ls -t $srcdir/configure conftestfile`
+ set X `ls -t $srcdir/configure conftest.file`
fi
- if test "[$]*" != "X $srcdir/configure conftestfile" \
- && test "[$]*" != "X conftestfile $srcdir/configure"; then
+ rm -f conftest.file
+ if test "$[*]" != "X $srcdir/configure conftest.file" \
+ && test "$[*]" != "X conftest.file $srcdir/configure"; then
# If neither matched, then we have a broken ls. This can happen
# if, for instance, CONFIG_SHELL is bash and it inherits a
alias in your environment])
fi
- test "[$]2" = conftestfile
+ test "$[2]" = conftest.file
)
then
# Ok.
AC_MSG_ERROR([newly created file is older than distributed files!
Check your system clock])
fi
-rm -f conftest*
AC_MSG_RESULT(yes)])
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf. Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
- $1=$2
- AC_MSG_RESULT(found)
+
+# serial 2
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+ am_missing_run="$MISSING --run "
else
- $1="$3/missing $2"
- AC_MSG_RESULT(missing)
+ am_missing_run=
+ am_backtick='`'
+ AC_MSG_WARN([${am_backtick}missing' script is too old or missing])
fi
-AC_SUBST($1)])
+])
+
+# AM_AUX_DIR_EXPAND
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory. The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run. This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+# fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+# fails if $ac_aux_dir is absolute,
+# fails when called from a subdirectory in a VPATH build with
+# a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir. In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
+# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+# MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH. The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND], [
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`CDPATH=:; cd $ac_aux_dir && pwd`
+])
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+install_sh=${install_sh-"$am_aux_dir/install-sh"}
+AC_SUBST(install_sh)])
+
+# One issue with vendor `install' (even GNU) is that you can't
+# specify the program used to strip binaries. This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in `make install-strip', and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# serial 4 -*- Autoconf -*-
+
+
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery. Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+
+# _AM_DEPENDENCIES(NAME)
+# ---------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX" or "OBJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
+ [$1], CXX, [depcc="$CXX" am_compiler_list=],
+ [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc']
+ [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
+ [depcc="$$1" am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+ [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named `D' -- because `-MD' means `put the output
+ # in D'.
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+
+ am_cv_$1_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+ fi
+ for depmode in $am_compiler_list; do
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ echo '#include "conftest.h"' > conftest.c
+ echo 'int i;' > conftest.h
+ echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf
+
+ case $depmode in
+ nosideeffect)
+ # after this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ none) break ;;
+ esac
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this.
+ if depmode=$depmode \
+ source=conftest.c object=conftest.o \
+ depfile=conftest.Po tmpdepfile=conftest.TPo \
+ $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 &&
+ grep conftest.h conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ am_cv_$1_dependencies_compiler_type=$depmode
+ break
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_$1_dependencies_compiler_type=none
+fi
+])
+$1DEPMODE="depmode=$am_cv_$1_dependencies_compiler_type"
+AC_SUBST([$1DEPMODE])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+AC_DEFUN([AM_SET_DEPDIR],
+[rm -f .deps 2>/dev/null
+mkdir .deps 2>/dev/null
+if test -d .deps; then
+ DEPDIR=.deps
+else
+ # MS-DOS does not allow filenames that begin with a dot.
+ DEPDIR=_deps
+fi
+rmdir .deps 2>/dev/null
+AC_SUBST(DEPDIR)
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE(dependency-tracking,
+[ --disable-dependency-tracking Speeds up one-time builds
+ --enable-dependency-tracking Do not reject slow dependency extractors])
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+pushdef([subst], defn([AC_SUBST]))
+subst(AMDEPBACKSLASH)
+popdef([subst])
+])
+
+# Generate code to set up dependency tracking.
+# This macro should only be invoked once -- use via AC_REQUIRE.
+# Usage:
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+
+#
+# This code is only required when automatic dependency tracking
+# is enabled. FIXME. This creates each `.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],[
+AC_OUTPUT_COMMANDS([
+test x"$AMDEP_TRUE" != x"" ||
+for mf in $CONFIG_FILES; do
+ case "$mf" in
+ Makefile) dirpart=.;;
+ */Makefile) dirpart=`echo "$mf" | sed -e 's|/[^/]*$||'`;;
+ *) continue;;
+ esac
+ grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue
+ # Extract the definition of DEP_FILES from the Makefile without
+ # running `make'.
+ DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ # When using ansi2knr, U may be empty or an underscore; expand it
+ U=`sed -n -e '/^U = / s///p' < "$mf"`
+ test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
+ # We invoke sed twice because it is the simplest approach to
+ # changing $(DEPDIR) to its actual value in the expansion.
+ for file in `sed -n -e '
+ /^DEP_FILES = .*\\\\$/ {
+ s/^DEP_FILES = //
+ :loop
+ s/\\\\$//
+ p
+ n
+ /\\\\$/ b loop
+ p
+ }
+ /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`echo "$file" | sed -e 's|/[^/]*$||'`
+ $ac_aux_dir/mkinstalldirs "$dirpart/$fdir" > /dev/null 2>&1
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+done
+], [AMDEP_TRUE="$AMDEP_TRUE"
+ac_aux_dir="$ac_aux_dir"])])
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+doit:
+ @echo done
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include='#'
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | fgrep -v 'ing directory'`" = "done"; then
+ am__include=include
+ am__quote=
+ _am_result=GNU
+fi
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+ am__include=.include
+ am__quote='"'
+ _am_result=BSD
+ fi
+fi
+AC_SUBST(am__include)
+AC_SUBST(am__quote)
+AC_MSG_RESULT($_am_result)
+rm -f confinc confmf
+])
+
+# serial 3
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+#
+# FIXME: Once using 2.50, use this:
+# m4_match([$1], [^TRUE\|FALSE$], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_DEFUN([AM_CONDITIONAL],
+[ifelse([$1], [TRUE],
+ [errprint(__file__:__line__: [$0: invalid condition: $1
+])dnl
+m4exit(1)])dnl
+ifelse([$1], [FALSE],
+ [errprint(__file__:__line__: [$0: invalid condition: $1
+])dnl
+m4exit(1)])dnl
+AC_SUBST([$1_TRUE])
+AC_SUBST([$1_FALSE])
+if $2; then
+ $1_TRUE=
+ $1_FALSE='#'
+else
+ $1_TRUE='#'
+ $1_FALSE=
+fi])
# Like AC_CONFIG_HEADER, but automatically create stamp file.
-AC_DEFUN(AM_CONFIG_HEADER,
-[AC_PREREQ([2.12])
-AC_CONFIG_HEADER([$1])
-dnl When config.status generates a header, we must update the stamp-h file.
-dnl This file resides in the same directory as the config header
-dnl that is generated. We must strip everything past the first ":",
-dnl and everything past the last "/".
-AC_OUTPUT_COMMANDS(changequote(<<,>>)dnl
-ifelse(patsubst(<<$1>>, <<[^ ]>>, <<>>), <<>>,
-<<test -z "<<$>>CONFIG_HEADERS" || echo timestamp > patsubst(<<$1>>, <<^\([^:]*/\)?.*>>, <<\1>>)stamp-h<<>>dnl>>,
-<<am_indx=1
-for am_file in <<$1>>; do
- case " <<$>>CONFIG_HEADERS " in
- *" <<$>>am_file "*<<)>>
- echo timestamp > `echo <<$>>am_file | sed -e 's%:.*%%' -e 's%[^/]*$%%'`stamp-h$am_indx
+# serial 3
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated. We must strip everything past the first ":",
+# and everything past the last "/".
+
+AC_PREREQ([2.12])
+
+AC_DEFUN([AM_CONFIG_HEADER],
+[ifdef([AC_FOREACH],dnl
+ [dnl init our file count if it isn't already
+ m4_ifndef([_AM_Config_Header_Index], m4_define([_AM_Config_Header_Index], [0]))
+ dnl prepare to store our destination file list for use in config.status
+ AC_FOREACH([_AM_File], [$1],
+ [m4_pushdef([_AM_Dest], m4_patsubst(_AM_File, [:.*]))
+ m4_define([_AM_Config_Header_Index], m4_incr(_AM_Config_Header_Index))
+ dnl and add it to the list of files AC keeps track of, along
+ dnl with our hook
+ AC_CONFIG_HEADERS(_AM_File,
+dnl COMMANDS, [, INIT-CMDS]
+[# update the timestamp
+echo timestamp >"AS_ESCAPE(_AM_DIRNAME(]_AM_Dest[))/stamp-h]_AM_Config_Header_Index["
+][$2]m4_ifval([$3], [, [$3]]))dnl AC_CONFIG_HEADERS
+ m4_popdef([_AM_Dest])])],dnl
+[AC_CONFIG_HEADER([$1])
+ AC_OUTPUT_COMMANDS(
+ ifelse(patsubst([$1], [[^ ]], []),
+ [],
+ [test -z "$CONFIG_HEADERS" || echo timestamp >dnl
+ patsubst([$1], [^\([^:]*/\)?.*], [\1])stamp-h]),dnl
+[am_indx=1
+for am_file in $1; do
+ case " \$CONFIG_HEADERS " in
+ *" \$am_file "*)
+ am_dir=\`echo \$am_file |sed 's%:.*%%;s%[^/]*\$%%'\`
+ if test -n "\$am_dir"; then
+ am_tmpdir=\`echo \$am_dir |sed 's%^\(/*\).*\$%\1%'\`
+ for am_subdir in \`echo \$am_dir |sed 's%/% %'\`; do
+ am_tmpdir=\$am_tmpdir\$am_subdir/
+ if test ! -d \$am_tmpdir; then
+ mkdir \$am_tmpdir
+ fi
+ done
+ fi
+ echo timestamp > "\$am_dir"stamp-h\$am_indx
;;
esac
- am_indx=`expr "<<$>>am_indx" + 1`
-done<<>>dnl>>)
-changequote([,]))])
+ am_indx=\`expr \$am_indx + 1\`
+done])
+])]) # AM_CONFIG_HEADER
+
+# _AM_DIRNAME(PATH)
+# -----------------
+# Like AS_DIRNAME, only do it during macro expansion
+AC_DEFUN([_AM_DIRNAME],
+ [m4_if(m4_regexp([$1], [^.*[^/]//*[^/][^/]*/*$]), -1,
+ m4_if(m4_regexp([$1], [^//\([^/]\|$\)]), -1,
+ m4_if(m4_regexp([$1], [^/.*]), -1,
+ [.],
+ m4_patsubst([$1], [^\(/\).*], [\1])),
+ m4_patsubst([$1], [^\(//\)\([^/].*\|$\)], [\1])),
+ m4_patsubst([$1], [^\(.*[^/]\)//*[^/][^/]*/*$], [\1]))[]dnl
+]) # _AM_DIRNAME
# serial 2
# program @code{ansi2knr}, which comes with Ghostscript.
# @end defmac
-AC_DEFUN(AM_PROG_CC_STDC,
+AC_DEFUN([AM_PROG_CC_STDC],
[AC_REQUIRE([AC_PROG_CC])
AC_BEFORE([$0], [AC_C_INLINE])
AC_BEFORE([$0], [AC_C_CONST])
dnl FIXME: can't do this because then AC_AIX won't work due to a
dnl circular dependency.
dnl AC_BEFORE([$0], [AC_PROG_CPP])
-AC_MSG_CHECKING(for ${CC-cc} option to accept ANSI C)
+AC_MSG_CHECKING([for ${CC-cc} option to accept ANSI C])
AC_CACHE_VAL(am_cv_prog_cc_stdc,
[am_cv_prog_cc_stdc=no
ac_save_CC="$CC"
# breaks some systems' header files.
# AIX -qlanglvl=ansi
# Ultrix and OSF/1 -std1
-# HP-UX -Aa -D_HPUX_SOURCE
+# HP-UX 10.20 and later -Ae
+# HP-UX older versions -Aa -D_HPUX_SOURCE
# SVR4 -Xc -D__EXTENSIONS__
-for ac_arg in "" -qlanglvl=ansi -std1 "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
do
CC="$ac_save_CC $ac_arg"
AC_TRY_COMPILE(
if test -z "$am_cv_prog_cc_stdc"; then
AC_MSG_RESULT([none needed])
else
- AC_MSG_RESULT($am_cv_prog_cc_stdc)
+ AC_MSG_RESULT([$am_cv_prog_cc_stdc])
fi
case "x$am_cv_prog_cc_stdc" in
x|xno) ;;
# serial 1
-AC_DEFUN(AM_C_PROTOTYPES,
+AC_DEFUN([AM_C_PROTOTYPES],
[AC_REQUIRE([AM_PROG_CC_STDC])
AC_REQUIRE([AC_PROG_CPP])
AC_MSG_CHECKING([for function prototypes])
else
AC_MSG_RESULT(no)
U=_ ANSI2KNR=./ansi2knr
- # Ensure some checks needed by ansi2knr itself.
- AC_HEADER_STDC
- AC_CHECK_HEADERS(string.h)
fi
+# Ensure some checks needed by ansi2knr itself.
+AC_HEADER_STDC
+AC_CHECK_HEADERS(string.h)
AC_SUBST(U)dnl
AC_SUBST(ANSI2KNR)dnl
])
# Ulrich Drepper <drepper@cygnus.com>, 1995.
#
# This file can be copied and used freely without restrictions. It can
-# be used in projects which are not available under the GNU Public License
-# but which still want to provide support for the GNU gettext functionality.
-# Please note that the actual code is *not* freely available.
+# be used in projects which are not available under the GNU General Public
+# License but which still want to provide support for the GNU gettext
+# functionality.
+# Please note that the actual code of GNU gettext is covered by the GNU
+# General Public License and is *not* in the public domain.
-# serial 9
+# serial 10
dnl Usage: AM_WITH_NLS([TOOLSYMBOL], [NEEDSYMBOL], [LIBDIR]).
dnl If TOOLSYMBOL is specified and is 'use-libtool', then a libtool library
AC_CHECK_FUNCS(dcgettext)
LIBS="$gt_save_LIBS"
+ dnl Search for GNU msgfmt in the PATH.
AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl
- if test "$MSGFMT" != "no"; then
- AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
- fi
+ [$ac_dir/$ac_word --statistics /dev/null >/dev/null 2>&1], :)
+ AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
+ dnl Search for GNU xgettext in the PATH.
AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
+ [$ac_dir/$ac_word --omit-header /dev/null >/dev/null 2>&1], :)
CATOBJEXT=.gmo
fi
dnl Mark actions used to generate GNU NLS library.
INTLOBJS="\$(GETTOBJS)"
AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], msgfmt)
+ [$ac_dir/$ac_word --statistics /dev/null >/dev/null 2>&1], :)
AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
+ [$ac_dir/$ac_word --omit-header /dev/null >/dev/null 2>&1], :)
AC_SUBST(MSGFMT)
BUILD_INCLUDED_LIBINTL=yes
USE_INCLUDED_LIBINTL=yes
LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'`
fi
+ dnl This could go away some day; the PATH_PROG_WITH_TEST already does it.
+ dnl Test whether we really found GNU msgfmt.
+ if test "$GMSGFMT" != ":"; then
+ dnl If it is no GNU msgfmt we define it as : so that the
+ dnl Makefiles still can work.
+ if $GMSGFMT --statistics /dev/null >/dev/null 2>&1; then
+ : ;
+ else
+ AC_MSG_RESULT(
+ [found msgfmt program is not GNU msgfmt; ignore it])
+ GMSGFMT=":"
+ fi
+ fi
+
+ dnl This could go away some day; the PATH_PROG_WITH_TEST already does it.
dnl Test whether we really found GNU xgettext.
if test "$XGETTEXT" != ":"; then
dnl If it is no GNU xgettext we define it as : so that the
dnl Makefiles still can work.
- if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
+ if $XGETTEXT --omit-header /dev/null >/dev/null 2>&1; then
: ;
else
AC_MSG_RESULT(
ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`"
ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
+ # In autoconf-2.13 it is called $ac_given_srcdir.
+ # In autoconf-2.50 it is called $srcdir.
test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
case "$ac_given_srcdir" in
.) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
# Ulrich Drepper <drepper@cygnus.com>, 1996.
#
# This file can be copied and used freely without restrictions. It can
-# be used in projects which are not available under the GNU Public License
-# but which still want to provide support for the GNU gettext functionality.
-# Please note that the actual code is *not* freely available.
+# be used in projects which are not available under the GNU General Public
+# License but which still want to provide support for the GNU gettext
+# functionality.
+# Please note that the actual code of GNU gettext is covered by the GNU
+# General Public License and is *not* in the public domain.
-# serial 1
+# serial 2
dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
;;
esac])dnl
$1="$ac_cv_path_$1"
-if test -n "[$]$1"; then
+if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then
AC_MSG_RESULT([$]$1)
else
AC_MSG_RESULT(no)
# Ulrich Drepper <drepper@cygnus.com>, 1995.
#
# This file can be copied and used freely without restrictions. It can
-# be used in projects which are not available under the GNU Public License
-# but which still want to provide support for the GNU gettext functionality.
-# Please note that the actual code is *not* freely available.
+# be used in projects which are not available under the GNU General Public
+# License but which still want to provide support for the GNU gettext
+# functionality.
+# Please note that the actual code of GNU gettext is covered by the GNU
+# General Public License and is *not* in the public domain.
# serial 2
projects / bison.git / blobdiff