fi
# `libtool' can also be set to `yes' or `no'.
-depfile=${depfile-`echo "$object" | sed 's,\([^/]*\)$,.deps/\1,;s/\.\([^.]*\)$/.P\1/'`}
+if test -z "$depfile"; then
+ base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'`
+ dir=`echo "$object" | sed 's,/.*$,/,'`
+ if test "$dir" = "$object"; then
+ dir=
+ fi
+ # FIXME: should be _deps on DOS.
+ depfile="$dir.deps/$base"
+fi
+
tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
rm -f "$tmpdepfile"
rm -f "$tmpdepfile"
;;
+icc)
+ # Must come before tru64.
+
+ # Intel's C compiler understands `-MD -MF file'. However
+ # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
+ # will fill foo.d with something like
+ # foo.o: sub/foo.c
+ # foo.o: sub/foo.h
+ # which is wrong. We want:
+ # sub/foo.o: sub/foo.c
+ # sub/foo.o: sub/foo.h
+ # sub/foo.c:
+ # sub/foo.h:
+
+ "$@" -MD -MF "$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ # Each line is of the form `foo.o: dependent.h'.
+ # Do two passes, one to just change these to
+ # `$object: dependent.h' and one to simply `dependent.h:'.
+ sed -e "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+ sed -e "s,^[^:]*: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
tru64)
- # The Tru64 AIX compiler uses -MD to generate dependencies as a side
+ # The Tru64 compiler uses -MD to generate dependencies as a side
# effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
- # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+ # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
# dependencies in `foo.d' instead, so we check for that too.
# Subdirectories are respected.
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
- tmpdepfile1="$object.d"
- tmpdepfile2=`echo "$object" | sed -e 's/.o$/.d/'`
if test "$libtool" = yes; then
+ tmpdepfile1="$dir.libs/$base.lo.d"
+ tmpdepfile2="$dir.libs/$base.d"
"$@" -Wc,-MD
else
+ tmpdepfile1="$dir$base.o.d"
+ tmpdepfile2="$dir$base.d"
"$@" -MD
fi
dashmstdout)
# Important note: in order to support this mode, a compiler *must*
- # always write the proprocessed file to stdout, regardless of -o,
- # because we must use -o when running libtool.
- test -z "$dashmflag" && dashmflag=-M
- ( IFS=" "
- case " $* " in
- *" --mode=compile "*) # this is libtool, let us make it quiet
- for arg
- do # cycle over the arguments
- case "$arg" in
- "--mode=compile")
- # insert --quiet before "--mode=compile"
- set fnord "$@" --quiet
- shift # fnord
- ;;
- esac
- set fnord "$@" "$arg"
- shift # fnord
- shift # "$arg"
- done
+ # always write the proprocessed file to stdout, regardless of -o.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test $1 != '--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove `-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
;;
esac
- "$@" $dashmflag | sed 's:^[^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
- ) &
- proc=$!
- "$@"
- stat=$?
- wait "$proc"
- if test "$stat" != 0; then exit $stat; fi
+ done
+
+ test -z "$dashmflag" && dashmflag=-M
+ # Require at least two characters before searching for `:'
+ # in the target name. This is to cope with DOS-style filenames:
+ # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
+ "$@" $dashmflag |
+ sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
rm -f "$depfile"
cat < "$tmpdepfile" > "$depfile"
tr ' ' '
;;
makedepend)
- # X makedepend
- (
- shift
- cleared=no
- for arg in "$@"; do
- case $cleared in no)
- set ""; shift
- cleared=yes
- esac
- case "$arg" in
- -D*|-I*)
- set fnord "$@" "$arg"; shift;;
- -*)
- ;;
- *)
- set fnord "$@" "$arg"; shift;;
- esac
+ "$@" || exit $?
+ # Remove any Libtool call
+ if test "$libtool" = yes; then
+ while test $1 != '--mode=compile'; do
+ shift
done
- obj_suffix="`echo $object | sed 's/^.*\././'`"
- touch "$tmpdepfile"
- ${MAKEDEPEND-makedepend} 2>/dev/null -o"$obj_suffix" -f"$tmpdepfile" "$@"
- ) &
- proc=$!
- "$@"
- stat=$?
- wait "$proc"
- if test "$stat" != 0; then exit $stat; fi
+ shift
+ fi
+ # X makedepend
+ shift
+ cleared=no
+ for arg in "$@"; do
+ case $cleared in
+ no)
+ set ""; shift
+ cleared=yes ;;
+ esac
+ case "$arg" in
+ -D*|-I*)
+ set fnord "$@" "$arg"; shift ;;
+ # Strip any option that makedepend may not understand. Remove
+ # the object too, otherwise makedepend will parse it as a source file.
+ -*|$object)
+ ;;
+ *)
+ set fnord "$@" "$arg"; shift ;;
+ esac
+ done
+ obj_suffix="`echo $object | sed 's/^.*\././'`"
+ touch "$tmpdepfile"
+ ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
rm -f "$depfile"
cat < "$tmpdepfile" > "$depfile"
- tail +3 "$tmpdepfile" | tr ' ' '
+ sed '1,2d' "$tmpdepfile" | tr ' ' '
' | \
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
cpp)
# Important note: in order to support this mode, a compiler *must*
- # always write the proprocessed file to stdout, regardless of -o,
- # because we must use -o when running libtool.
- ( IFS=" "
- case " $* " in
- *" --mode=compile "*)
- for arg
- do # cycle over the arguments
- case $arg in
- "--mode=compile")
- # insert --quiet before "--mode=compile"
- set fnord "$@" --quiet
- shift # fnord
- ;;
- esac
- set fnord "$@" "$arg"
- shift # fnord
- shift # "$arg"
- done
+ # always write the proprocessed file to stdout.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test $1 != '--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove `-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
;;
esac
- "$@" -E |
+ done
+
+ "$@" -E |
sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
sed '$ s: \\$::' > "$tmpdepfile"
- ) &
- proc=$!
- "$@"
- stat=$?
- wait "$proc"
- if test "$stat" != 0; then exit $stat; fi
rm -f "$depfile"
echo "$object : \\" > "$depfile"
cat < "$tmpdepfile" >> "$depfile"
# Important note: in order to support this mode, a compiler *must*
# always write the proprocessed file to stdout, regardless of -o,
# because we must use -o when running libtool.
- ( IFS=" "
- case " $* " in
- *" --mode=compile "*)
- for arg
- do # cycle over the arguments
- case $arg in
- "--mode=compile")
- # insert --quiet before "--mode=compile"
- set fnord "$@" --quiet
- shift # fnord
- ;;
- esac
+ "$@" || exit $?
+ IFS=" "
+ for arg
+ do
+ case "$arg" in
+ "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+ set fnord "$@"
+ shift
+ shift
+ ;;
+ *)
set fnord "$@" "$arg"
- shift # fnord
- shift # "$arg"
- done
- ;;
+ shift
+ shift
+ ;;
esac
- "$@" -E |
- sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
- ) &
- proc=$!
- "$@"
- stat=$?
- wait "$proc"
- if test "$stat" != 0; then exit $stat; fi
+ done
+ "$@" -E |
+ sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
. "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
projects / bison.git / blobdiff