bsd/netat/adsp_Open.c

   1 /*
   2  * Copyright (c) 2000 Apple Computer, Inc. All rights reserved.
   3  *
   4  * @APPLE_OSREFERENCE_LICENSE_HEADER_START@
   5  *
   6  * This file contains Original Code and/or Modifications of Original Code
   7  * as defined in and that are subject to the Apple Public Source License
   8  * Version 2.0 (the 'License'). You may not use this file except in
   9  * compliance with the License. The rights granted to you under the License
  10  * may not be used to create, or enable the creation or redistribution of,
  11  * unlawful or unlicensed copies of an Apple operating system, or to
  12  * circumvent, violate, or enable the circumvention or violation of, any
  13  * terms of an Apple operating system software license agreement.
  14  *
  15  * Please obtain a copy of the License at
  16  * http://www.opensource.apple.com/apsl/ and read it before using this file.
  17  *
  18  * The Original Code and all software distributed under the License are
  19  * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER
  20  * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES,
  21  * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY,
  22  * FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT.
  23  * Please see the License for the specific language governing rights and
  24  * limitations under the License.
  25  *
  26  * @APPLE_OSREFERENCE_LICENSE_HEADER_END@
  27  */
  28 /* adspOpen.c v01.20
  29  *
  30  * From v01.20 08/23/90 Mike Shoemaker for MacOS
  31  *    Modified for MP, 1996 by Tuyen Nguyen
  32  *   Modified, April 9, 1997 by Tuyen Nguyen for MacOSX.
  33  */
  34
  35 #include <sys/errno.h>
  36 #include <sys/types.h>
  37 #include <sys/param.h>
  38 #include <machine/spl.h>
  39 #include <sys/systm.h>
  40 #include <sys/kernel.h>
  41 #include <sys/proc.h>
  42 #include <sys/filedesc.h>
  43 #include <sys/fcntl.h>
  44 #include <sys/mbuf.h>
  45 #include <sys/socket.h>
  46 #include <sys/socketvar.h>
  47 #include <sys/time.h>
  48
  49 #include <netat/sysglue.h>
  50 #include <netat/appletalk.h>
  51 #include <netat/at_pcb.h>
  52 #include <netat/debug.h>
  53 #include <netat/adsp.h>
  54 #include <netat/adsp_internal.h>
  55
  56 extern int *adsp_pidM;
  57
  58
  59 /*
  60  * NextCID
  61  *
  62  * Create a unique connection ID.
  63  *
  64  * INPUTS:
  65  *              none
  66  * OUTPUTS:
  67  *              unique connection ID
  68  */
  69
  70 unsigned short NextCID(void)
  71 {
  72         unsigned short num;
  73         register CCB *queue;
  74
  75         while (1) {
  76             num = ++adspGlobal.lastCID;
  77             /* qfind_w below is in 68K assembly */
  78             /* point to the first element */
  79             queue = (CCB *)AT_ADSP_STREAMS;
  80             while (queue) {
  81                     /* and scan .. */
  82                     if (queue->locCID == num)
  83                         break;
  84                     queue = queue->ccbLink;
  85             }
  86             if (queue == (CCBPtr)NULL)
  87                 break;
  88         }
  89         return num;
  90 }
  91
  92 static  byte xlateStateTbl[4] = /* The value to be given to the CCB's state. */
  93 {                               /* indexed by ocMode */
  94         sOpening,               /* ocRequest */
  95         sPassive,               /* ocPassive */
  96         sOpening,               /* ocAccept */
  97         sOpen                   /* ocEstablish */
  98 };
  99 static  byte xlateOpenTbl[4] =  /* Value to use for open state. */
 100 {                               /* indexed by ocMode */
 101         O_STATE_OPENWAIT,       /* ocRequest */
 102         O_STATE_LISTEN,         /* ocPassive */
 103         O_STATE_ESTABLISHED,    /* ocAccept */
 104         O_STATE_OPEN            /* ocEstablish */
 105 };
 106
 107 /*
 108  * adspOpen
 109  *
 110  * INPUTS:
 111  *      -->     ccbRefNum       refnum of connection end
 112  *      -->     remoteCID       connection id of remote connection end
 113  *      -->     remoteAddress   internet address of remote connection end
 114  *      -->     filterAddress   filter for incoming open connection requests
 115  *      -->     sendSeq         initial send sequence number to use
 116  *      -->     sendWindow      initial size of remote end's receive buffer
 117  *      -->     recvSeq         initial receive sequence number to use
 118  *      -->     attnSendSeq     initial attention send sequence number
 119  *      -->     attnRecvSeq     initial receive sequence number
 120  *      -->     ocMode          connection opening mode
 121  *      -->     ocMaximum       maximum retries of open connection request
 122  *
 123  * OUTPUTS:
 124  *      <--     localCID        connection identifier of this connection end
 125  *      <--     remoteCID       connection id of remote connection end
 126  *      <--     remoteAddress
 127  *      <--     sendSeq
 128  *      <--     sendWindow
 129  *      <--     attnSendSeq
 130  *
 131  * ERRORS:
 132  *              errRefNum       bad connection refnum
 133  *              errState        connection end must be closed
 134  *              errOpening      open connection attempt failed
 135  *              errAborted      request aborted by a remove or close call
 136  */
 137 int adspOpen(sp, pb)            /* (DSPPBPtr pb) */
 138     register CCBPtr sp;
 139     register struct adspcmd *pb;
 140 {
 141     int ocMode;
 142     register gbuf_t *mp;
 143
 144     if (sp == 0) {
 145         pb->ioResult = errRefNum; /* Unknown refnum */
 146         return EINVAL;
 147     }
 148
 149     if ((sp->state != sClosed) ||
 150         (sp->removing)) { /* The CCB must be closed */
 151         pb->ioResult = errState;
 152         return EALREADY;
 153     }
 154
 155     ocMode = pb->u.openParams.ocMode; /* get a local copy of open mode */
 156         if (ocMode == ocRequest)
 157                 adsp_pidM[pb->socket] = 0;
 158
 159     /*
 160      * Save parameters.  Fill in defaults if zero
 161      */
 162     if (pb->u.openParams.ocInterval)
 163         sp->openInterval = pb->u.openParams.ocInterval;
 164     else
 165         sp->openInterval = ocIntervalDefault;
 166
 167     if (pb->u.openParams.ocMaximum)
 168         sp->openRetrys = pb->u.openParams.ocMaximum;
 169     else
 170         sp->openRetrys = ocMaximumDefault;
 171
 172     sp->remoteAddress = *((AddrUnionPtr)&pb->u.openParams.remoteAddress);
 173     /* Not used for passive */
 174     /*
 175      * Clear out send/receive buffers.
 176      */
 177     if (sp->sbuf_mb) { /* clear the send queue */
 178         gbuf_freel(sp->sbuf_mb);
 179         sp->sbuf_mb = 0;
 180     }
 181     if (sp->csbuf_mb) {
 182         gbuf_freem(sp->csbuf_mb);
 183         sp->csbuf_mb = 0;
 184     }
 185     if (sp->rbuf_mb) { /* clear the receive queue */
 186         gbuf_freel(sp->rbuf_mb);
 187         sp->rbuf_mb = 0;
 188     }
 189     if (sp->crbuf_mb) {
 190         gbuf_freem(sp->crbuf_mb);
 191         sp->crbuf_mb = 0;
 192     }
 193
 194     sp->rData = 0;              /* Flag both buffers as empty */
 195     sp->sData = 0;
 196     sp->recvQPending = 0;       /* No bytes in receive queue */
 197
 198     /*
 199      * Clear all of those pesky flags
 200      */
 201     sp->userFlags = 0;
 202     sp->sendDataAck = 0;
 203     sp->sendAttnAck = 0;
 204     sp->sendAttnData = 0;
 205     sp->callSend = 0;
 206     sp->removing = 0;
 207     sp->writeFlush = 0;
 208
 209     /*
 210      * Reset round-trip timers
 211      */
 212     sp->roundTrip = sp->rtmtInterval;
 213     sp->deviation = 0;
 214
 215     /*
 216      * Reset stuff for retransmit advice packet
 217      */
 218     sp->badSeqCnt = 0;
 219     /*
 220      * Reset flow control variables
 221      */
 222     sp->pktSendMax = 1; /* Slow start says we should set this to 1 */
 223     sp->pktSendCnt = 0;
 224     sp->rbufFull = 0;
 225     sp->resentData = 0;
 226     sp->noXmitFlow = 0;
 227     sp->waitingAck = 0;
 228
 229     /*
 230      * Copy required information out of parameter block
 231      */
 232     if (ocMode == ocAccept || ocMode == ocEstablish) {
 233         sp->remCID = pb->u.openParams.remoteCID;
 234         sp->sendSeq = sp->firstRtmtSeq = pb->u.openParams.sendSeq;
 235         sp->sendWdwSeq = sp->sendSeq + pb->u.openParams.sendWindow;
 236         sp->attnSendSeq = pb->u.openParams.attnSendSeq;
 237     } else {                    /* accept or establish */
 238         sp->remCID = 0;
 239         sp->sendSeq = 0;
 240         sp->sendWdwSeq = 0;
 241         sp->attnSendSeq = 0;
 242     }
 243
 244     if (ocMode == ocEstablish) { /* Only set these if establish mode */
 245         sp->recvSeq = pb->u.openParams.recvSeq;
 246         sp->attnRecvSeq = pb->u.openParams.attnRecvSeq;
 247         UAS_ASSIGN_HTON(sp->f.CID, sp->locCID); /* Preset the CID in the ADSP header */
 248         /* This is done elsewhere for all other modes */
 249         InsertTimerElem(&adspGlobal.slowTimers, &sp->ProbeTimer,
 250                         sp->probeInterval);
 251     } else {                    /* establish */
 252         /* All other modes need a CID assigned */
 253         sp->locCID = NextCID();
 254         sp->recvSeq = 0;
 255         sp->attnRecvSeq = 0;
 256     }
 257
 258     /*
 259      * Now set the state variables for this CCB.
 260      */
 261
 262     sp->openState = xlateOpenTbl[ocMode-ocRequest];
 263     sp->state = xlateStateTbl[ocMode-ocRequest];
 264
 265     if (ocMode == ocEstablish) { /* For establish call, we're done */
 266         pb->ioResult = 0;
 267         adspioc_ack(0, (gbuf_t *)pb->ioc, pb->gref);
 268         return 0;
 269     }
 270
 271     pb->qLink = 0;              /* Clear link field before putting on queue */
 272     mp = gbuf_copym(pb->mp);    /* Save parameter block to match later */
 273
 274     if (mp == 0) {
 275             pb->ioResult = errDSPQueueSize;
 276             return ENOBUFS;
 277     }
 278     pb->ioResult = 1;   /* not open -> not done */
 279     adspioc_ack(0, (gbuf_t *)pb->ioc, pb->gref); /* release user */
 280     sp->opb = (struct adspcmd *)gbuf_rptr(mp);
 281     sp->opb->ioc = 0;           /* unlink saved pb from ioctl block */
 282     sp->opb->mp = mp;
 283
 284     /*
 285      * For request & accept, need to send a packet
 286      */
 287     if ((ocMode == ocRequest) || (ocMode == ocAccept)) {
 288         sp->sendCtl |= (1 << (ocMode == ocRequest ?
 289                               ADSP_CTL_OREQ : ADSP_CTL_OREQACK));
 290         CheckSend(sp);
 291     }
 292     return 0;
 293 }
 294
 295 int adspMode(pb)
 296     register struct adspcmd *pb;
 297 {
 298     return pb->u.openParams.ocMode;
 299 }