]>
git.saurik.com Git - apple/xnu.git/blob - bsd/netat/routing_tables.h
2 * Copyright (c) 2000 Apple Computer, Inc. All rights reserved.
4 * @APPLE_LICENSE_HEADER_START@
6 * Copyright (c) 1999-2003 Apple Computer, Inc. All Rights Reserved.
8 * This file contains Original Code and/or Modifications of Original Code
9 * as defined in and that are subject to the Apple Public Source License
10 * Version 2.0 (the 'License'). You may not use this file except in
11 * compliance with the License. Please obtain a copy of the License at
12 * http://www.opensource.apple.com/apsl/ and read it before using this
15 * The Original Code and all software distributed under the License are
16 * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER
17 * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES,
18 * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY,
19 * FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT.
20 * Please see the License for the specific language governing rights and
21 * limitations under the License.
23 * @APPLE_LICENSE_HEADER_END@
26 * This include file defines the RTMP table and ZIP table
27 * for the AppleTalk AIX router
30 * 0.01 03/16/94 LD Creation
31 * 0.10 08/19/94 LD merged
35 #ifndef _NETAT_ROUTING_TABLES_H_
36 #define _NETAT_ROUTING_TABLES_H_
37 #include <sys/appleapiopts.h>
38 #ifdef __APPLE_API_PRIVATE
40 /* RTMP table entry state bitmap (EntryState) values */
42 #define RTE_STATE_UNUSED 0 /* this entry is not in used */
43 #define RTE_STATE_BAD 2 /* The route is almost ready to be removed */
44 #define RTE_STATE_SUSPECT 4 /* didn't received an update for route */
45 #define RTE_STATE_GOOD 8 /* this route is 100% valid */
46 #define RTE_STATE_ZKNOWN 16 /* we know the zones for this entry */
47 #define RTE_STATE_UPDATED 32 /* set when updated from received rtmp table */
48 #define RTE_STATE_BKUP 64 /* for future use : AURP */
49 #define RTE_STATE_PERMANENT 128 /* This is a directly attached route */
51 #define PORT_ONLINE 32 /* router port in forwarding state */
52 #define PORT_SEEDING 31 /* router port seeding */
53 #define PORT_ACTIVATING 16 /* router port waiting for net infos */
54 #define PORT_ERR_NOZONE 6 /* router no zones for non seed port*/
55 #define PORT_ERR_BADRTMP 5 /* router problem bad rtmp version*/
56 #define PORT_ERR_STARTUP 4 /* router problem cable in start range*/
57 #define PORT_ERR_CABLER 3 /* router problem bad cable range*/
58 #define PORT_ERR_SEED 2 /* router startup seeding problem */
59 #define PORT_ONERROR 1 /* router port with generic problem*/
60 #define PORT_OFFLINE 0 /* router port disabled/not ready */
62 #define ZT_MAX 1024 /* Don't allow more zones than that */
63 #define ZT_MIN 32 /* Minimum for a good behaviour*/
64 #define ZT_DEFAULT 512 /* Minimum for a good behaviour*/
65 #define RT_MAX 4096 /* Don't allow more entries than that */
66 #define RT_MIN 128 /* Minimum for a good behaviour*/
67 #define RT_DEFAULT 1024 /* Minimum for a good behaviour*/
68 #define ZT_BYTES (ZT_MAX/8) /* Bytes in Zone Bitmap */
69 #define ZT_MAXEDOUT ZT_MAX+1 /* reached the entry limit.. */
70 #define RT_MIX_DEFAULT 2000 /* default for nbr of ppsec */
73 #define NOTIFY_N_DIST 31 /* Notify Neighbor distance (when shutdown or so) */
75 /* Useful macros to access the RTMP tuple fields */
77 #define TUPLENET(x) NET_VALUE(((at_rtmp_tuple *)(x))->at_rtmp_net)
78 #define TUPLEDIST(x) ((((at_rtmp_tuple *)(x))->at_rtmp_data) & RTMP_DISTANCE)
79 #define TUPLERANGE(x) ((((at_rtmp_tuple *)(x))->at_rtmp_data) & RTMP_RANGE_FLAG)
81 #define CableStart ifID->ifThisCableStart
82 #define CableStop ifID->ifThisCableEnd
84 #define RTMP_IDLENGTH 4 /* RTMP packet Node header length */
87 #define RTMP_VERSION_NUMBER 0x82 /* V2 only version of RTMP supported */
89 #define ERTR_SEED_CONFLICT 0x101 /* Conflict between port information and net
90 * value received for the port (fatal for Rtr)
92 #define ERTR_CABLE_CONFLICT 0x102 /* Conflict between port information and net
93 * information received in a RTMP packet
96 #define ERTR_RTMP_BAD_VERSION 0x103 /* We received a non phase-II RTMP packet
97 * that's bad... We can't deal with it
100 #define ERTR_CABLE_STARTUP 0x104 /* the cable range we're on happen to
101 * be in the startup range. Shouldn't
104 #define ERTR_CABLE_NOZONE 0x105 /* We haven't found any zones for that port
105 * after all the timeout expired
109 /* RTMP table entry */
111 typedef struct rt_entry
{
113 struct rt_entry
*left
; /* btree left pointer */
114 struct rt_entry
*right
; /* btree right pointer */
116 at_net_al NetStop
; /* Last net # in the range, or network # if
117 non extended network */
118 at_net_al NetStart
; /* Starting network number in the range, 0
119 non extended network */
120 at_net_al NextIRNet
; /* Network number of next Internet Router */
121 at_node NextIRNode
; /* Node ID of next Router */
122 u_char ZoneBitMap
[ZT_BYTES
]; /* One bit per Zone defined for this entry */
123 u_char NetDist
; /* Distance in hops of the destination net */
124 u_char NetPort
; /* Physical port number to forward to */
125 u_char EntryState
; /* State of the entry bitmap field */
132 /* ZIP Table entry */
136 u_short ZoneCount
; /* Count of reference to zone entry */
137 at_nvestr_t Zone
; /* zone name as a Network Visible Entity */
141 /* for zone retrieval to user space only */
143 unsigned short entryno
; /* zone table entry number (1st = 0) */
144 ZT_entry zt
; /* the zone table entry */
149 /* Macros for Routing table B-tree easy access */
151 #define RT_DELETE(NetStop, NetStart) {\
153 if ((found = rt_bdelete(NetStop, NetStart))) { \
154 memset(found, '\0', sizeof(RT_entry)); \
155 found->right = RT_table_freelist; \
156 RT_table_freelist = found; \
160 /* Set/Reset and test the All zones known bit in for the entry field */
162 #define RT_ALL_ZONES_KNOWN(entry) ((entry)->EntryState & RTE_STATE_ZKNOWN)
163 #define RT_SET_ZONE_KNOWN(entry) ((entry)->EntryState |= RTE_STATE_ZKNOWN)
164 #define RT_CLR_ZONE_KNOWN(entry) ((entry)->EntryState ^= RTE_STATE_ZKNOWN)
167 * check if a zone number is in a given zone map
169 #define ZT_ISIN_ZMAP(znum, zmap) ((zmap)[(znum-1) >> 3] & 0x80 >> (znum-1) % 8)
171 /* remove a zone from the zone bitmap, and check if the zone
172 * is still in use by someone else.
175 #define ZT_CLR_ZMAP(num, zmap) { \
176 if ((zmap)[(num-1) >> 3] & 0x80 >> (num-1) % 8) { \
177 (zmap)[(num-1) >> 3] ^= 0x80 >> (num-1) % 8; \
178 ZT_table[(num-1)].ZoneCount-- ; \
182 /* set a bit in an entry bit map */
184 #define ZT_SET_ZMAP(num, zmap) { \
185 if (!zmap[(num-1) >> 3] & 0x80 >> (num-1) % 8) { \
186 zmap[(num-1) >> 3] |= 0x80 >> (num-1) % 8; \
187 ZT_table[(num-1)].ZoneCount++ ; \
191 extern int regDefaultZone(at_ifaddr_t
*);
192 extern int zonename_equal(at_nvestr_t
*, at_nvestr_t
*);
194 extern RT_entry
*RT_table_freelist
;
195 extern RT_entry RT_table_start
;
196 extern RT_entry
*RT_table
;
197 extern RT_entry
*rt_binsert();
198 extern RT_entry
*rt_insert();
199 extern RT_entry
*rt_bdelete();
200 extern RT_entry
*rt_blookup(int);
201 extern RT_entry
*rt_getNextRoute(int);
203 extern ZT_entry
*ZT_table
;
204 extern short RT_maxentry
;
205 extern short ZT_maxentry
;
207 extern volatile int RouterMix
;
209 extern int zt_add_zone(char *, short);
210 extern int zt_add_zonename(at_nvestr_t
*);
211 extern int zt_ent_zindex(u_char
*);
212 extern ZT_entryno
*zt_getNextZone(int);
213 extern void zt_remove_zones(u_char
*);
214 extern void zt_set_zmap(u_short
, char *);
215 extern void rtmp_router_input();
219 #endif /* __APPLE_API_PRIVATE */
220 #endif /* _NETAT_ROUTING_TABLES_H_ */