]>
git.saurik.com Git - apple/xnu.git/blob - bsd/sys/param.h
2 * Copyright (c) 2000 Apple Computer, Inc. All rights reserved.
4 * @APPLE_OSREFERENCE_LICENSE_HEADER_START@
6 * This file contains Original Code and/or Modifications of Original Code
7 * as defined in and that are subject to the Apple Public Source License
8 * Version 2.0 (the 'License'). You may not use this file except in
9 * compliance with the License. The rights granted to you under the License
10 * may not be used to create, or enable the creation or redistribution of,
11 * unlawful or unlicensed copies of an Apple operating system, or to
12 * circumvent, violate, or enable the circumvention or violation of, any
13 * terms of an Apple operating system software license agreement.
15 * Please obtain a copy of the License at
16 * http://www.opensource.apple.com/apsl/ and read it before using this file.
18 * The Original Code and all software distributed under the License are
19 * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER
20 * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES,
21 * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY,
22 * FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT.
23 * Please see the License for the specific language governing rights and
24 * limitations under the License.
26 * @APPLE_OSREFERENCE_LICENSE_HEADER_END@
28 /* Copyright (c) 1995, 1997 Apple Computer, Inc. All Rights Reserved */
30 * Copyright (c) 1982, 1986, 1989, 1993
31 * The Regents of the University of California. All rights reserved.
32 * (c) UNIX System Laboratories, Inc.
33 * All or some portions of this file are derived from material licensed
34 * to the University of California by American Telephone and Telegraph
35 * Co. or Unix System Laboratories, Inc. and are reproduced herein with
36 * the permission of UNIX System Laboratories, Inc.
38 * Redistribution and use in source and binary forms, with or without
39 * modification, are permitted provided that the following conditions
41 * 1. Redistributions of source code must retain the above copyright
42 * notice, this list of conditions and the following disclaimer.
43 * 2. Redistributions in binary form must reproduce the above copyright
44 * notice, this list of conditions and the following disclaimer in the
45 * documentation and/or other materials provided with the distribution.
46 * 3. All advertising materials mentioning features or use of this software
47 * must display the following acknowledgement:
48 * This product includes software developed by the University of
49 * California, Berkeley and its contributors.
50 * 4. Neither the name of the University nor the names of its contributors
51 * may be used to endorse or promote products derived from this software
52 * without specific prior written permission.
54 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
55 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
56 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
57 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
58 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
59 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
60 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
61 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
62 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
63 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
66 * @(#)param.h 8.3 (Berkeley) 4/4/95
72 #define BSD 199506 /* System version (year & month). */
76 #define NeXTBSD 1995064 /* NeXTBSD version (year, month, release) */
77 #define NeXTBSD4_0 0 /* NeXTBSD 4.0 */
79 #include <sys/_types.h>
80 #include <sys/_types/_null.h>
83 #include <sys/types.h>
87 * Machine-independent constants (some used in following include files).
88 * Redefined constants are from POSIX 1003.1 limits file.
90 * MAXCOMLEN should be >= sizeof(ac_comm) (see <acct.h>)
91 * MAXLOGNAME should be >= UT_NAMESIZE (see <utmp.h>)
93 #include <sys/syslimits.h>
95 #define MAXCOMLEN 16 /* max command name remembered */
96 #define MAXINTERP 64 /* max interpreter file name length */
97 #define MAXLOGNAME 255 /* max login name length */
98 #define MAXUPRC CHILD_MAX /* max simultaneous processes */
99 #define NCARGS ARG_MAX /* max bytes for an exec function */
100 #define NGROUPS NGROUPS_MAX /* max number groups */
101 #define NOFILE 256 /* default max open files per process */
102 #define NOGROUP 65535 /* marker for empty group set member */
103 #define MAXHOSTNAMELEN 256 /* max hostname size */
104 #define MAXDOMNAMELEN 256 /* maximum domain name length */
106 /* Machine type dependent parameters. */
107 #include <machine/param.h>
109 /* More types and definitions used throughout the kernel. */
111 #include <machine/limits.h>
112 #include <sys/cdefs.h>
113 #include <sys/errno.h>
114 #include <sys/time.h>
115 #include <sys/resource.h>
116 #include <sys/ucred.h>
123 #include <sys/signal.h>
126 * Priorities. Note that with 32 run queues, differences less than 4 are
134 #define PZERO 22 /* No longer magic, shouldn't be here. XXX */
140 #define MAXPRI 127 /* Priorities range from 0 through MAXPRI. */
142 #define PRIMASK 0x0ff
143 #define PCATCH 0x100 /* OR'd with pri for tsleep to check signals */
144 #define PTTYBLOCK 0x200 /* for tty SIGTTOU and SIGTTIN blocking */
145 #define PDROP 0x400 /* OR'd with pri to stop re-aquistion of mutex upon wakeup */
146 #define PSPIN 0x800 /* OR'd with pri to require mutex in spin mode upon wakeup */
148 #define NBPW sizeof(int) /* number of bytes per word (integer) */
150 #define CMASK 022 /* default file mask: S_IWGRP|S_IWOTH */
151 #define NODEV (dev_t)(-1) /* non-existent device */
154 * Clustering of hardware pages on machines with ridiculously small
155 * page sizes is done here. The paging subsystem deals with units of
156 * CLSIZE pte's describing NBPG (from machine/param.h) pages each.
158 #define CLBYTES (CLSIZE*NBPG)
159 #define CLOFSET (CLSIZE*NBPG-1) /* for clusters, like PGOFSET */
160 #define claligned(x) ((((int)(x))&CLOFSET)==0)
161 #define CLOFF CLOFSET
162 #define CLSHIFT (PGSHIFT+CLSIZELOG2)
165 #define clbase(i) (i)
168 /* Give the base virtual address (first of CLSIZE). */
169 #define clbase(i) ((i) &~ (CLSIZE-1))
170 /* Round a number of clicks up to a whole cluster. */
171 #define clrnd(i) (((i) + (CLSIZE-1)) &~ (CLSIZE-1))
174 #define CBLOCK 64 /* Clist block size, must be a power of 2. */
175 #define CBQSIZE (CBLOCK/NBBY) /* Quote bytes/cblock - can do better. */
176 /* Data chars/clist. */
177 #define CBSIZE (CBLOCK - sizeof(struct cblock *) - CBQSIZE)
178 #define CROUND (CBLOCK - 1) /* Clist rounding. */
181 * File system parameters and macros.
183 * The file system is made out of blocks of at most MAXPHYS units, with
184 * smaller units (fragments) only in the last direct block. MAXBSIZE
185 * primarily determines the size of buffers in the buffer pool. It may be
186 * made larger than MAXPHYS without any effect on existing file systems;
187 * however making it smaller may make some file systems unmountable.
188 * We set this to track the value of MAX_UPL_TRANSFER_BYTES from
189 * osfmk/mach/memory_object_types.h to bound it at the maximum UPL size.
191 #define MAXBSIZE (256 * 4096)
192 #define MAXPHYSIO MAXPHYS
195 #define MAXPHYSIO_WIRED (16 * 1024 * 1024)
198 * MAXPATHLEN defines the longest permissable path length after expanding
199 * symbolic links. It is used to allocate a temporary buffer from the buffer
200 * pool in which to do the name expansion, hence should be a power of two,
201 * and must be less than or equal to MAXBSIZE. MAXSYMLINKS defines the
202 * maximum number of symbolic links that may be expanded in a path name.
203 * It should be set high enough to allow all legitimate uses, but halt
204 * infinite loops reasonably quickly.
206 #define MAXPATHLEN PATH_MAX
207 #define MAXSYMLINKS 32
209 /* Bit map related macros. */
210 #define setbit(a, i) (((unsigned char *)(a))[(i)/NBBY] |= 1u<<((i)%NBBY))
211 #define clrbit(a, i) (((unsigned char *)(a))[(i)/NBBY] &= ~(1u<<((i)%NBBY)))
212 #define isset(a, i) (((unsigned char *)(a))[(i)/NBBY] & (1u<<((i)%NBBY)))
213 #define isclr(a, i) ((((unsigned char *)(a))[(i)/NBBY] & (1u<<((i)%NBBY))) == 0)
215 /* Macros for counting and rounding. */
217 #define howmany(x, y) ((((x) % (y)) == 0) ? ((x) / (y)) : (((x) / (y)) + 1))
219 #define roundup(x, y) ((((x) % (y)) == 0) ? \
220 (x) : ((x) + ((y) - ((x) % (y)))))
221 #define powerof2(x) ((((x)-1)&(x))==0)
223 /* Macros for min/max. */
225 #define MIN(a, b) (((a)<(b))?(a):(b))
228 #define MAX(a, b) (((a)>(b))?(a):(b))
232 * Scale factor for scaled integers used to count %cpu time and load avgs.
234 * The number of CPU `tick's that map to a unique `%age' can be expressed
235 * by the formula (1 / (2 ^ (FSHIFT - 11))). The maximum load average that
236 * can be calculated (assuming 32 bits) can be closely approximated using
237 * the formula (2 ^ (2 * (16 - FSHIFT))) for (FSHIFT < 15).
239 * For the scheduler to maintain a 1:1 mapping of CPU `tick' to `%age',
240 * FSHIFT must be at least 11; this gives us a maximum load avg of ~1024.
242 #define FSHIFT 11 /* bits to right of fixed binary point */
243 #define FSCALE (1<<FSHIFT)
245 #endif /* _SYS_PARAM_H_ */