xnu-792.10.96.tar.gz

[apple/xnu.git] / bsd / dev / vn / shadow.c

/*
 * Copyright (c) 2001 Apple Computer, Inc. All rights reserved.
 *
 * @APPLE_LICENSE_HEADER_START@
 * 
 * The contents of this file constitute Original Code as defined in and
 * are subject to the Apple Public Source License Version 1.1 (the
 * "License").  You may not use this file except in compliance with the
 * License.  Please obtain a copy of the License at
 * http://www.apple.com/publicsource and read it before using this file.
 * 
 * This Original Code and all software distributed under the License are
 * distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, EITHER
 * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES,
 * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT.  Please see the
 * License for the specific language governing rights and limitations
 * under the License.
 * 
 * @APPLE_LICENSE_HEADER_END@
 */

/*
 * shadow.c
 *
 * Implement copy-on-write shadow map to allow a disk image to be
 * mounted read-only, yet be writable by transferring writes to a
 * "shadow" file.  Subsequent reads from blocks that have been
 * written will then go the "shadow" file.
 *
 * The map has two parts:
 * 1) a bit map to track which blocks have been written
 * 2) a band map to map a "band" within the original file to a corresponding
 *    "band" in the shadow file.  Each band has the same size.
 *
 * The band map is used to ensure that blocks that are contiguous in the 
 * original file will remain contiguous in the shadow file.
 *
 * For debugging purposes, this file can be compiled standalone using:
 * cc -o shadow shadow.c -DTEST_SHADOW
 */

/*
 * Modification History
 *
 * December 21, 2001    Dieter Siegmund (dieter@apple.com)
 * - initial revision
 */
#include <sys/param.h>
#include <sys/types.h>
#include <mach/boolean.h>

#include <string.h>

#ifdef TEST_SHADOW
#include <unistd.h>
#include <stdlib.h>
#define my_malloc(a)    malloc(a)
#define my_free(a)      free(a)
#else /* !TEST_SHADOW */
#include <sys/malloc.h>
#define my_malloc(a)    _MALLOC(a, M_TEMP, M_WAITOK)
#define my_free(a)      FREE(a, M_TEMP)
#include <libkern/libkern.h>
#endif /* TEST_SHADOW */

#include "shadow.h"

#define ULONG_ALL_ONES                  ((u_long)(-1))
#define USHORT_ALL_ONES                 ((u_short)(-1))
#define UCHAR_ALL_ONES                  ((u_char)(-1))

#define my_trunc(value, divisor)        ((value) / (divisor) * (divisor))

/* a band size of 128K can represent a file up to 8GB */
#define BAND_SIZE_DEFAULT_POWER_2       17
#define BAND_SIZE_DEFAULT               (1 << BAND_SIZE_DEFAULT_POWER_2)

typedef u_short band_number_t;
#define BAND_ZERO                       ((band_number_t)0)
#define BAND_MAX                        ((band_number_t)65535)

struct shadow_map {
    u_long              blocks_per_band;/* size in blocks */
    u_long              block_size;
    u_char *            block_bitmap;           /* 1 bit per block; 1=written */
    band_number_t *     bands;                  /* band map array */
    u_long              file_size_blocks;       /* size of file in bands */
    u_long              shadow_size_bands;      /* size of shadow in bands */
    u_long              next_band;              /* next free band */
    u_long              zeroth_band;            /* special-case 0th band */
};


typedef struct {
    u_long      byte;
    u_long      bit;
} bitmap_offset_t;

static __inline__ u_char
bit(int b)
{
    return ((u_char)(1 << b));
}

/* 
 * Function: bits_lower
 * Purpose:
 *   Return a byte value in which bits numbered lower than 'b' are set.
 */
static __inline__ u_char
bits_lower(int b)
{
    return ((u_char)(bit(b) - 1));
}

/*
 * Function: byte_set_bits
 * Purpose:
 *   Set the given range of bits within a byte.
 */
static __inline__ u_char
byte_set_bits(int start, int end)
{
    return ((u_char)((~bits_lower(start)) & (bits_lower(end) | bit(end))));
}

static __inline__ bitmap_offset_t
bitmap_offset(off_t where)
{
    bitmap_offset_t     b;

    b.byte = where / NBBY;
    b.bit = where % NBBY;
    return (b);
}

/* 
 * Function: bitmap_set
 *
 * Purpose:
 *   Set the given range of bits.
 *
 *   This algorithm tries to set the extents using the biggest
 *   units, using longs, then a short, then a byte, then bits.
 */
static void
bitmap_set(u_char * map, u_long start_bit, u_long bit_count)
{
    bitmap_offset_t     start;
    bitmap_offset_t     end;

    start = bitmap_offset(start_bit);
    end = bitmap_offset(start_bit + bit_count);
    if (start.byte < end.byte) {
        u_long n_bytes;

        if (start.bit) {
            map[start.byte] |= byte_set_bits(start.bit, NBBY - 1);
            start.bit = 0;
            start.byte++;
            if (start.byte == end.byte)
                goto end;
        }
                        
        n_bytes = end.byte - start.byte;
        
        while (n_bytes >= (sizeof(u_long))) {
            *((u_long *)(map + start.byte)) = ULONG_ALL_ONES;
            start.byte += sizeof(u_long);
            n_bytes -= sizeof(u_long);
        }
        if (n_bytes >= sizeof(u_short)) {
            *((u_short *)(map + start.byte)) = USHORT_ALL_ONES;
            start.byte += sizeof(u_short);
            n_bytes -= sizeof(u_short);
        }
        if (n_bytes == 1) {
            map[start.byte] = UCHAR_ALL_ONES;
            start.byte++;
            n_bytes = 0;
        }
    }

 end:
    if (end.bit > start.bit) {
        map[start.byte] |= byte_set_bits(start.bit, end.bit - 1);
    }

    return;
}

/*
 * Function: bitmap_get
 *
 * Purpose:
 *   Return the number of bits in the range that are the same e.g.
 *   11101 returns 3 because the first 3 bits are the same (1's), whereas
 *   001100 returns 2 because the first 2 bits are the same.
 *   This algorithm tries to count things in as big a chunk as possible,
 *   first aligning to a byte offset, then trying to count longs, a short,
 *   a byte, then any remaining bits to find the bit that is different.
 */

static u_long
bitmap_get(u_char * map, u_long start_bit, u_long bit_count, 
           boolean_t * ret_is_set)
{
    u_long              count;
    int                 i;
    boolean_t           is_set;
    bitmap_offset_t     start;
    bitmap_offset_t     end;

    start = bitmap_offset(start_bit);
    end = bitmap_offset(start_bit + bit_count);

    is_set = (map[start.byte] & bit(start.bit)) ? TRUE : FALSE;
    count = 0;

    if (start.byte < end.byte) {
        u_long n_bytes;

        if (start.bit) { /* try to align to a byte */
            for (i = start.bit; i < NBBY; i++) {
                boolean_t       this_is_set;

                this_is_set = (map[start.byte] & bit(i)) ? TRUE : FALSE;
                if (this_is_set != is_set) {
                    goto done; /* found bit that was different, we're done */
                }
                count++;
            }
            start.bit = 0; /* made it to the next byte */
            start.byte++;
            if (start.byte == end.byte)
                goto end; /* no more bytes, check for any leftover bits */
        }
        /* calculate how many bytes are left in the range */
        n_bytes = end.byte - start.byte;

        /* check for 4 bytes of the same bits */
        while (n_bytes >= sizeof(u_long)) {
            u_long * valPtr = (u_long *)(map + start.byte);
            if ((is_set && *valPtr == ULONG_ALL_ONES) 
                || (!is_set && *valPtr == 0)) {
                count += sizeof(*valPtr) * NBBY;
                start.byte += sizeof(*valPtr);
                n_bytes -= sizeof(*valPtr);
            }
            else
                break; /* bits differ */

        }
        /* check for 2 bytes of the same bits */
        if (n_bytes >= sizeof(u_short)) {
            u_short * valPtr = (u_short *)(map + start.byte);
                        
            if ((is_set && *valPtr == USHORT_ALL_ONES) 
                || (!is_set && (*valPtr == 0))) {
                count += sizeof(*valPtr) * NBBY;
                start.byte += sizeof(*valPtr);
                n_bytes -= sizeof(*valPtr);
            }
        }

        /* check for 1 byte of the same bits */
        if (n_bytes) { 
            if ((is_set && map[start.byte] == UCHAR_ALL_ONES) 
                || (!is_set && map[start.byte] == 0)) {
                count += NBBY;
                start.byte++;
                n_bytes--;
            }
            /* we found bits that were different, find the first one */
            if (n_bytes) { 
                for (i = 0; i < NBBY; i++) {
                    boolean_t   this_is_set;

                    this_is_set = (map[start.byte] & bit(i)) ? TRUE : FALSE;
                    if (this_is_set != is_set) {
                        break;
                    }
                    count++;
                }
                goto done;
            }
        }
    }

 end:
    for (i = start.bit; i < (int)end.bit; i++) {
        boolean_t this_is_set = (map[start.byte] & bit(i)) ? TRUE : FALSE;
        
        if (this_is_set != is_set) {
            break;
        }
        count++;
    }

 done:
    *ret_is_set = is_set;
    return (count);
}

static __inline__ band_number_t
shadow_map_block_to_band(shadow_map_t * map, unsigned long block)
{
    return (block / map->blocks_per_band);
}

/*
 * Function: shadow_map_mapped_band
 * Purpose:
 *   Return the mapped band for the given band.
 *   If map_it is FALSE, and the band is not mapped, return FALSE.
 *   If map_it is TRUE, then this function will always return TRUE.
 */
static boolean_t
shadow_map_mapped_band(shadow_map_t * map, band_number_t band,
                       boolean_t map_it, band_number_t * mapped_band)
{
    boolean_t           is_mapped = FALSE;

    if (band == map->zeroth_band) {
        *mapped_band = BAND_ZERO;
        is_mapped = TRUE;
    }
    else {
        *mapped_band = map->bands[band];
        if (*mapped_band == BAND_ZERO) {
            if (map_it) {
                /* grow the file */
                if (map->next_band == 0) {
                    /* remember the zero'th band */
                    map->zeroth_band = band;
                }
                *mapped_band = map->bands[band] = map->next_band++;
                is_mapped = TRUE;
            }
        }
        else {
            is_mapped = TRUE;
        }
    }
    return (is_mapped);
}

/* 
 * Function: shadow_map_contiguous
 *
 * Purpose:
 *   Return the first offset within the range position..(position + count) 
 *   that is not a contiguous mapped band.
 *
 *   If called with is_write = TRUE, this function will map bands as it goes.
 */
static u_long
shadow_map_contiguous(shadow_map_t * map, u_long start_block,
                      u_long num_blocks, boolean_t is_write)
{
    band_number_t       band = shadow_map_block_to_band(map, start_block);
    u_long              end_block = start_block + num_blocks;
    boolean_t           is_mapped;
    band_number_t       mapped_band;
    u_long              ret_end_block = end_block;
    u_long              p;

    is_mapped = shadow_map_mapped_band(map, band, is_write, &mapped_band);
    if (is_write == FALSE && is_mapped == FALSE) {
        static int happened = 0;
        /* this can't happen */
        if (happened == 0) {
            printf("shadow_map_contiguous: this can't happen!\n");
            happened = 1;
        }
        return (start_block);
    }
    for (p = my_trunc(start_block + map->blocks_per_band, 
                      map->blocks_per_band);
         p < end_block; p += map->blocks_per_band) {
        band_number_t   next_mapped_band;
                
        band++;
        is_mapped = shadow_map_mapped_band(map, band, is_write,
                                           &next_mapped_band);
        if (is_write == FALSE && is_mapped == FALSE) {
            return (p);
        }
        if ((mapped_band + 1) != next_mapped_band) {
            /* not contiguous */
            ret_end_block = p;
            break;
        }
        mapped_band = next_mapped_band;
    }
    return (ret_end_block);
}


/* 
 * Function: block_bitmap_size
 * Purpose:
 *   The number of bytes required in a block bitmap to represent a file of size 
 *   file_size.
 *
 *   The bytes required is the number of blocks in the file,
 *   divided by the number of bits per byte.
 * Note:
 *   An 8GB file requires (assuming 512 byte block):
 *   2^33 / 2^9 / 2^3 = 2^21 = 2MB
 *   of bitmap space.  This is a non-trival amount of memory,
 *   particularly since most of the bits will be zero.
 *   A sparse bitmap would really help in this case.
 */
static __inline__ u_long
block_bitmap_size(off_t file_size, u_long block_size)
{
    off_t blocks = howmany(file_size, block_size);
    return (howmany(blocks, NBBY));
}

/*
 * Function: shadow_map_read
 *
 * Purpose:
 *   Calculate the block offset within the shadow to read, and the number
 *   blocks to read.  The input values (block_offset, block_count) refer
 *   to the original file.
 *
 *   The output values (*incr_block_offset, *incr_block_count) refer to the
 *   shadow file if the return value is TRUE.  They refer to the original
 *   file if the return value is FALSE.

 *   Blocks within a band may or may not have been written, in addition,
 *   Bands are not necessarily contiguous, therefore:
 *      *incr_block_count <= block_count
 *   The caller must be prepared to call this function interatively
 *   to complete the whole i/o.
 * Returns:
 *   TRUE if the shadow file should be read, FALSE if the original file
 *   should be read.
 */
boolean_t
shadow_map_read(shadow_map_t * map, u_long block_offset, u_long block_count,
                u_long * incr_block_offset, u_long * incr_block_count)
{
    boolean_t           written = FALSE;
    u_long              n_blocks;

    if (block_offset >= map->file_size_blocks
        || (block_offset + block_count) > map->file_size_blocks) {
        printf("shadow_map_read: request (%ld, %ld) exceeds file size %ld\n",
               block_offset, block_count, map->file_size_blocks);
        *incr_block_count = 0;
    }
    n_blocks = bitmap_get(map->block_bitmap, block_offset, block_count,
                          &written);
    if (written == FALSE) {
        *incr_block_count = n_blocks;
        *incr_block_offset = block_offset;
    }
    else { /* start has been written, and therefore mapped */
        band_number_t   mapped_band;
        u_long          band_limit;
        
        mapped_band = map->bands[shadow_map_block_to_band(map, block_offset)];
        *incr_block_offset = mapped_band * map->blocks_per_band
            + (block_offset % map->blocks_per_band);
        band_limit 
            = shadow_map_contiguous(map, block_offset, block_count, FALSE);
        *incr_block_count = band_limit - block_offset;
        if (*incr_block_count > n_blocks) {
            *incr_block_count = n_blocks;
        }
    }
    return (written);
}

/*
 * Function: shadow_map_write
 *
 * Purpose:
 *   Calculate the block offset within the shadow to write, and the number
 *   blocks to write.  The input values (block_offset, block_count) refer
 *   to the original file.  The output values 
 *   (*incr_block_offset, *incr_block_count) refer to the shadow file.
 *
 *   Bands are not necessarily contiguous, therefore:
 *      *incr_block_count <= block_count
 *   The caller must be prepared to call this function interatively
 *   to complete the whole i/o.
 * Returns:
 *   TRUE if the shadow file was grown, FALSE otherwise. 
 */
boolean_t
shadow_map_write(shadow_map_t * map, u_long block_offset, 
                 u_long block_count, u_long * incr_block_offset, 
                 u_long * incr_block_count)
{
    u_long              band_limit;
    band_number_t       mapped_band;
    boolean_t           shadow_grew = FALSE;

    if (block_offset >= map->file_size_blocks
        || (block_offset + block_count) > map->file_size_blocks) {
        printf("shadow_map_write: request (%ld, %ld) exceeds file size %ld\n",
               block_offset, block_count, map->file_size_blocks);
        *incr_block_count = 0;
    }
    
    band_limit = shadow_map_contiguous(map, block_offset, block_count, TRUE);
    mapped_band = map->bands[shadow_map_block_to_band(map, block_offset)];
    *incr_block_offset = mapped_band * map->blocks_per_band
        + (block_offset % map->blocks_per_band);
    *incr_block_count = band_limit - block_offset;

    /* mark these blocks as written */
    bitmap_set(map->block_bitmap, block_offset, *incr_block_count);

    if (map->next_band > map->shadow_size_bands) {
        map->shadow_size_bands = map->next_band;
        shadow_grew = TRUE;
    }
    return (shadow_grew);
}

boolean_t
shadow_map_is_written(shadow_map_t * map, u_long block_offset)
{
    bitmap_offset_t     b;

    b = bitmap_offset(block_offset);
    return ((map->block_bitmap[b.byte] & bit(b.bit)) ? TRUE : FALSE);
}

/*
 * Function: shadow_map_shadow_size
 *
 * Purpose:
 *   To return the size of the shadow file in blocks.
 */
u_long
shadow_map_shadow_size(shadow_map_t * map)
{
    return (map->shadow_size_bands * map->blocks_per_band);
}

/* 
 * Function: shadow_map_create
 *
 * Purpose:
 *   Allocate the dynamic data for keeping track of the shadow dirty blocks
 *   and the band mapping table.
 * Returns:
 *   NULL if an error occurred.
 */
shadow_map_t *
shadow_map_create(off_t file_size, off_t shadow_size, 
                  u_long band_size, u_long block_size)
{
    void *              block_bitmap = 0;
    u_long              bitmap_size;
    band_number_t *     bands = 0;
    shadow_map_t *      map;
    u_long              n_bands = 0;

    if (band_size == 0) {
        band_size = BAND_SIZE_DEFAULT;
    }

    n_bands = howmany(file_size, band_size);
    if (n_bands > (BAND_MAX + 1)) {
        printf("file is too big: %ld > %d\n",
               n_bands, BAND_MAX);
        goto failure;
    }

    /* create a block bitmap, one bit per block */
    bitmap_size = block_bitmap_size(file_size, block_size);
    block_bitmap = my_malloc(bitmap_size);
    if (block_bitmap == NULL) {
        printf("failed to allocate bitmap\n");
        goto failure;
    }
    bzero(block_bitmap, bitmap_size);

    /* get the band map */
    bands = (band_number_t *)my_malloc(n_bands * sizeof(band_number_t));
    if (bands == NULL) {
        printf("failed to allocate bands\n");
        goto failure;
    }
    bzero(bands, n_bands * sizeof(band_number_t));

    map = my_malloc(sizeof(*map));
    if (map == NULL) {
        printf("failed to allocate map\n");
        goto failure;
    }
    map->blocks_per_band = band_size / block_size;
    map->block_bitmap = block_bitmap;
    map->bands = bands;
    map->file_size_blocks = n_bands * map->blocks_per_band;
    map->next_band = 0;
    map->zeroth_band = -1;
    map->shadow_size_bands = howmany(shadow_size, band_size);
    map->block_size = block_size;
    return (map);
        
 failure:
    if (block_bitmap)
        my_free(block_bitmap);
    if (bands)
        my_free(bands);
    return (NULL);
}

/*
 * Function: shadow_map_free
 * Purpose:
 *   Frees the data structure to deal with the shadow map.
 */
void
shadow_map_free(shadow_map_t * map)
{       
    if (map->block_bitmap)
        my_free(map->block_bitmap);
    if (map->bands)
        my_free(map->bands);
    map->block_bitmap = 0;
    map->bands = 0;
    my_free(map);
    return;
}

#ifdef TEST_SHADOW
#define BAND_SIZE_BLOCKS        (BAND_SIZE_DEFAULT / 512)

enum {
    ReadRequest,
    WriteRequest,
};

typedef struct {
    int         type;
    u_long      offset;
    u_long      count;
} block_request_t;

int
main()
{
    shadow_map_t *      map;
    int                 i;
    block_request_t     requests[] = {
        { WriteRequest, BAND_SIZE_BLOCKS * 2, 1 },
        { ReadRequest, BAND_SIZE_BLOCKS / 2, BAND_SIZE_BLOCKS * 2 - 2 },
        { WriteRequest, BAND_SIZE_BLOCKS * 1, 5 * BAND_SIZE_BLOCKS + 3},
        { ReadRequest, 0, BAND_SIZE_BLOCKS * 10 },
        { WriteRequest, BAND_SIZE_BLOCKS * (BAND_MAX - 1),
          BAND_SIZE_BLOCKS * 2},
        { 0, 0 },
    };
    
    map = shadow_map_create(1024 * 1024 * 1024 * 8ULL, 0, 0, 512);
    if (map == NULL) {
        printf("shadow_map_create failed\n");
        exit(1);
    }
    for (i = 0; TRUE; i++) {
        u_long          offset;
        u_long          resid;
        boolean_t       shadow_grew;
        boolean_t       read_shadow;

        if (requests[i].count == 0) {
            break;
        }
        offset = requests[i].offset;
        resid = requests[i].count;
        printf("\n%s REQUEST (%ld, %ld)\n", 
               requests[i].type == WriteRequest ? "WRITE" : "READ",
               offset, resid);
        switch (requests[i].type) {
        case WriteRequest:
            while (resid > 0) {
                u_long this_offset;
                u_long this_count;
                
                shadow_grew = shadow_map_write(map, offset,
                                               resid,
                                               &this_offset,
                                               &this_count);
                printf("\t(%ld, %ld) => (%ld, %ld)",
                       offset, resid, this_offset, this_count);
                resid -= this_count;
                offset += this_count;
                if (shadow_grew) {
                    printf(" shadow grew to %ld", shadow_map_shadow_size(map));
                }
                printf("\n");
            }
            break;
        case ReadRequest:
            while (resid > 0) {
                u_long this_offset;
                u_long this_count;
                
                read_shadow = shadow_map_read(map, offset,
                                              resid,
                                              &this_offset,
                                              &this_count);
                printf("\t(%ld, %ld) => (%ld, %ld)%s\n",
                       offset, resid, this_offset, this_count,
                       read_shadow ? " from shadow" : "");
                if (this_count == 0) {
                    printf("this_count is 0, aborting\n");
                    break;
                }
                resid -= this_count;
                offset += this_count;
            }
            break;
        default:
            break;
        }
    }
    if (map) {
        shadow_map_free(map);
    }
    exit(0);
    return (0);
}
#endif